Both ELF and COFF have various sub-flavors, each of which would then
require its own emulation: Right now when configuring a COFF/PE
secondary target (with perhaps an ELF primary one), one gets plain COFF
emulation rather than COFF/PE one.
As such a multitude of emulations would be unwieldy (and likely fragile)
drop gas emulations altogether instead.
A build with --enable-maintainer-mode is currently failing with:
make[4]: *** No rule to make target '<SRC>/gas/config/te-ia64aix.h',
needed by '<SRC>/gas/po/gas.pot'. Stop.
make[4]: Leaving directory '<$OBJ>/gas/po'
make[3]: *** [Makefile:1695: all-recursive] Error 1
...
As config/te-ia64aix.h is now removed, remove the corresponding fragment
from the makefile.
gas/
* Makefile.am: Remove config/te-ia64aix.h.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
For some reason, these targets are missing although others from the
same family are present. This looks like an oversight.
This enables calling 'make install-dvi' from the top-level build
directory.
Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
The elf32-kvx.c and elf64-kvx.c rules in the bfd makefile are
different to the other similar generated files, and that reminded me
that we need to have $srcdir in the generated #line reference back to
the source for debugging, but don't want it for comments in bfd.pot
(because then bfd.pot will likely reference Nick's source tree).
This patch fixes that by making all the #line use $srcdir by virtue of
using $<, and edits bfd.pot.
I also uniq list of files to remove duplicated elfxx-x86.c, sort lists
of files and regen with our standard automake/autoconf.
* configure: Regenerate.
bfd/
* Makefile.am: Sort various lists of files. Use $< in #line
directive of generated C files.
(po/SRC-POTFILES.in): uniq SRC_POTFILES.
(po/BLD-POTFILES.in): uniq BFD_POTFILES.
* Makefile.in: Regenerate.
* po/Make-in (bfd.pot): Edit out source dir from comments.
* po/SRC-POTFILES.in: Regenerate.
gas/
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am (ALL_64_EMULATION_SOURCES): Sort.
* Makefile.in: Regenerate.
Delete a few files only used for obsolete targets, and tidy config,
xfails and other pieces of support specific to those targets. And
since I was editing target triplets in test files, fix the nm
alpha-linuxecoff fails.
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
Commit 04f096fb9e ("Move the xc16x target to the obsolete list") moved
the architecture from the "obsolete but still available" to the
"obsolete / support removed" list in config.bfd, making the architecture
impossible to enable (except maybe via "enable everything" options").
Note that I didn't touch */po/*.po{,t} on the assumption that these
would be updated by some (half)automatic means.
After commit d8af286fff ("RISC-V: Drop the privileged spec v1.9
support.") has removed support for privileged spec v1.9, this removes
it from the documentation.
References: d8af286fff ("RISC-V: Drop the privileged spec v1.9 support.")
gas/ChangeLog:
* configure: Regenerate.
* configure.ac: Remove reference to priv spec 1.9.
* po/fr.po: Same.
* po/ru.po: Same.
* po/uk.po: Same.
While support for the privileged spec was added in a63375ac33
("RISC-V: Hypervisor ext: support Privileged Spec 1.12"), the
documentation has not been updated. Add 1.12 to the relevant
documentation.
References: a63375ac33 ("RISC-V: Hypervisor ext: support Privileged Spec 1.12")
gas/ChangeLog:
* config/tc-riscv.c: Add 1.12 to the usage message.
* configure: Regenerate.
* configure.ac: Add 1.12 to the help/usage message.
* po/fr.po: Same.
* po/ru.po: Same.
* po/uk.po: Same.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
As discussed previously, a.out support is now quite deprecated, and in
some cases removed, in both Binutils itself and NetBSD, so this legacy
default makes little sense. `netbsdelf*` and `netbsdaout*` still work
allowing the user to be explicit about there choice. Additionally, the
configure script warns about the change as Nick Clifton requested.
One possible concern was the status of NetBSD on NS32K, where only a.out
was supported. But per [1] NetBSD has removed support, and if it were to
come back, it would be with ELF. The binutils implementation is
therefore marked obsolete, per the instructions in the last message.
With that patch and this one applied, I have confirmed the following:
--target=i686-unknown-netbsd
--target=i686-unknown-netbsdelf
builds completely
--target=i686-unknown-netbsdaout
properly fails because target is deprecated.
--target=vax-unknown-netbsdaout builds completely except for gas, where
the target is deprecated.
[1]: https://mail-index.netbsd.org/tech-toolchain/2021/07/19/msg004025.html
---
bfd/config.bfd | 43 +++++++++++++--------
bfd/configure.ac | 5 +--
binutils/testsuite/binutils-all/nm.exp | 2 +-
binutils/testsuite/lib/binutils-common.exp | 7 +---
config/picflag.m4 | 4 +-
gas/configure.tgt | 9 +++--
gas/testsuite/gas/arm/blx-bl-convert.d | 2 +-
gas/testsuite/gas/arm/blx-local-thumb.d | 2 +-
gas/testsuite/gas/sh/basic.exp | 2 +-
gdb/configure.host | 34 +++++++----------
gdb/configure.tgt | 2 +-
gdb/testsuite/gdb.asm/asm-source.exp | 6 +--
intl/configure | 2 +-
ld/configure.tgt | 44 +++++++++++-----------
ld/testsuite/ld-arm/arm-elf.exp | 4 +-
ld/testsuite/ld-elf/elf.exp | 2 +-
ld/testsuite/ld-elf/shared.exp | 4 +-
libiberty/configure | 4 +-
A number of targets, bfin, rl78, rx, can show odd failures when
bfd/reloc.c changes BFD_RELOC_* enum values, if recompiling over a
build dir with existing objects. The problem is caused by
bfin-parse.o and similar not being recompiled and so using stale
BFD_RELOC_* values. This isn't fixed by making bfin-parse.c depend on
bfd/reloc.c, which isn't necessary anyway. bfin-parse.o should have
been recompiled due to bfd/bfd.h changing when extracted bfd/reloc.c
BFD_RELOC_* values change, but that wasn't happening. The problem is
that automake generates a makefile that loads gas/config/.deps/
dependency file for objects with corresponding sources mentioned in
EXTRA_as_new_SOURCES. Unless we want to mess around generating
explicit dependencies, I think that mean moving some object files to
the build gas/config/. This patch does that, removing some hacks for
m68k-parse.c that should no longer be necessary, and removes some
rules that catered to old bison producing code that triggers compiler
warnings.
PR 23691
* Makefile.am (TARGET_CPU_CFILES): Split off config/xtensa-relax.c..
(TARGET_CPU_HFILES): ..and config/xtensa-relax.h..
(TARGET_EXTRA_FILES): ..to here. Add config/bfin-lex-wrapper.c,
and use alongside TARGET_CPU_CFILES.
(EXTRA_DIST): Update location of generated .c files.
(config/m68k-parse.c): New rule replacing m68k-parse.c rule.
(config/bfin-parse.c, config/rl78-parse.cm config/rx-parse.c),
(config/bfin-lex.c, config/bfin-lex-wrapper.@OBJEXT@): Similarly.
(itbl-lex-wrapper.@OBJEXT@): Simplify to just the needed
dependencies.
(itbl-parse.@OBJEXT@): Delete rule using NO_WERROR.
(itbl-parse.c, itbl-parse.h): Tidy.
* config/bfin-lex-wrapper.c: Include config/bfin-lex.c.
* config/bfin-lex.l: Include config/bfin-parse.h.
* configure.ac (extra_objects): Move object files corresponding
to .y and .l files now in config/ to config/.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
bfd * po/es.po: Fix printf format
binutils * windmc.c: Fix printf format
gas * config/tc-arc.c: Fix printf format
opcodes * po/es.po: Fix printf format
sim * arm/armos.c: Fix printf format
* ppc/emul_netbsd.c: Fix printf format
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
