558 Commits

Author	SHA1	Message	Date
Pedro Alves	0c8885885a	Regenerate gdbarch.h ... The previous commit included a stale gdbarch.h from an earlier version of that patch by mistake. gdb/ChangeLog: 2018-08-31 Pedro Alves <palves@redhat.com> * gdbarch.h: Regenerate.	2018-08-31 18:56:10 +01:00
Pedro Alves	7ea65f08fa	Add comment describing continuable/steppable/non-steppable watchpoints ... These weren't described anywhere in the sources. gdb/ChangeLog: 2018-08-31 Pedro Alves <palves@redhat.com> * gdbarch.sh (have_nonsteppable_watchpoint): Add comment. * target.h (Hardware watchpoint interfaces): Describe continuable/steppable/non-steppable watchpoints. * gdbarch.h, gdbarch.c: Regenerate.	2018-08-31 18:47:36 +01:00
Alan Hayward	a616bb9450	Split size in regset section iterators ... In the existing code, when using the regset section iteration functions, the size parameter is used in different ways. With collect, size is used to create the buffer in which to write the regset. (see linux-tdep.c::linux_collect_regset_section_cb). With supply, size is used to confirm the existing regset is the correct size. If REGSET_VARIABLE_SIZE is set then the regset can be bigger than size. Effectively, size is the minimum possible size of the regset. (see corelow.c::get_core_register_section). There are currently no targets with both REGSET_VARIABLE_SIZE and a collect function. In SVE, a corefile can contain one of two formats after the header, both of which are different sizes. However, when writing a core file, we always want to write out the full bigger size. To allow support of collects for REGSET_VARIABLE_SIZE we need two sizes. This is done by adding supply_size and collect_size. gdb/ * aarch64-fbsd-tdep.c (aarch64_fbsd_iterate_over_regset_sections): Add supply_size and collect_size. * aarch64-linux-tdep.c (aarch64_linux_iterate_over_regset_sections): Likewise. * alpha-linux-tdep.c (alpha_linux_iterate_over_regset_sections): * alpha-nbsd-tdep.c (alphanbsd_iterate_over_regset_sections): Likewise. * amd64-fbsd-tdep.c (amd64fbsd_iterate_over_regset_sections): Likewise. * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections): Likewise. * arm-bsd-tdep.c (armbsd_iterate_over_regset_sections): Likewise. * arm-fbsd-tdep.c (arm_fbsd_iterate_over_regset_sections): Likewise. * arm-linux-tdep.c (arm_linux_iterate_over_regset_sections): Likewise. * corelow.c (get_core_registers_cb): Likewise. (core_target::fetch_registers): Likewise. * fbsd-tdep.c (fbsd_collect_regset_section_cb): Likewise. * frv-linux-tdep.c (frv_linux_iterate_over_regset_sections): Likewise. * gdbarch.h (void): Regenerate. * gdbarch.sh: Add supply_size and collect_size. * hppa-linux-tdep.c (hppa_linux_iterate_over_regset_sections): Likewise. * hppa-nbsd-tdep.c (hppanbsd_iterate_over_regset_sections): Likewise. * hppa-obsd-tdep.c (hppaobsd_iterate_over_regset_sections): Likewise. * i386-fbsd-tdep.c (i386fbsd_iterate_over_regset_sections): Likewise. * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections): Likewise. * i386-tdep.c (i386_iterate_over_regset_sections): Likewise. * ia64-linux-tdep.c (ia64_linux_iterate_over_regset_sections): Likewise. * linux-tdep.c (linux_collect_regset_section_cb): Likewise. * m32r-linux-tdep.c (m32r_linux_iterate_over_regset_sections): Likewise. * m68k-bsd-tdep.c (m68kbsd_iterate_over_regset_sections): Likewise. * m68k-linux-tdep.c (m68k_linux_iterate_over_regset_sections): Likewise. * mips-fbsd-tdep.c (mips_fbsd_iterate_over_regset_sections): Likewise. * mips-linux-tdep.c (mips_linux_iterate_over_regset_sections): Likewise. * mips-nbsd-tdep.c (mipsnbsd_iterate_over_regset_sections): Likewise. * mips64-obsd-tdep.c (mips64obsd_iterate_over_regset_sections): Likewise. * mn10300-linux-tdep.c (am33_iterate_over_regset_sections): Likewise. * nios2-linux-tdep.c (nios2_iterate_over_regset_sections): Likewise. * ppc-fbsd-tdep.c (ppcfbsd_iterate_over_regset_sections): Likewise. * ppc-linux-tdep.c (ppc_linux_iterate_over_regset_sections): Likewise. * ppc-nbsd-tdep.c (ppcnbsd_iterate_over_regset_sections): Likewise. * ppc-obsd-tdep.c (ppcobsd_iterate_over_regset_sections): Likewise. * riscv-linux-tdep.c (riscv_linux_iterate_over_regset_sections): Likewise. * rs6000-aix-tdep.c (rs6000_aix_iterate_over_regset_sections): Likewise. * s390-linux-tdep.c (s390_iterate_over_regset_sections): Likewise. * score-tdep.c (score7_linux_iterate_over_regset_sections): Likewise. * sh-tdep.c (sh_iterate_over_regset_sections): Likewise. * sparc-tdep.c (sparc_iterate_over_regset_sections): Likewise. * tilegx-linux-tdep.c (tilegx_iterate_over_regset_sections): Likewise. * vax-tdep.c (vax_iterate_over_regset_sections): Likewise. * xtensa-tdep.c (xtensa_iterate_over_regset_sections): Likewise.	2018-08-13 10:16:41 +01:00
Maciej W. Rozycki	471b9d1507	GDB PR tdep/8282: MIPS: Wire in `set disassembler-options' ... Implement MIPS target support for passing options to the disassembler, complementing commit 65b48a8140 ("GDB: Add support for the new set/show disassembler-options commands."). This includes options that expect an argument, so adjust the generic code and data structures used so as to handle such options. So as to give backends syntax flexibility no specific delimiter has been defined to separate options from their respective arguments, so it has to be included as the last character of the option name. Completion code however has not been adjusted and consequently option arguments cannot be completed at this time. Also the MIPS target has non-empty defaults for the options, so that ABI names for the general-purpose registers respect our `set mips abi ...' setting rather than always being determined from the ELF headers of the binary file selected. Handle these defaults as implicit options, never shown to the user and always prepended to the user-specified options, so that the latters can override the defaults. The resulting output for the MIPS target is as follows: (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: no-aliases Use canonical instruction forms. msa Recognize MSA instructions. virt Recognize the virtualization ASE instructions. xpa Recognize the eXtended Physical Address (XPA) ASE instructions. ginv Recognize the Global INValidate (GINV) ASE instructions. gpr-names=ABI Print GPR names according to specified ABI. Default: based on binary being disassembled. fpr-names=ABI Print FPR names according to specified ABI. Default: numeric. cp0-names=ARCH Print CP0 register names according to specified architecture. Default: based on binary being disassembled. hwr-names=ARCH Print HWR names according to specified architecture. Default: based on binary being disassembled. reg-names=ABI Print GPR and FPR names according to specified ABI. reg-names=ARCH Print CP0 register and HWR names according to specified architecture. For the options above, the following values are supported for "ABI": numeric 32 n32 64 For the options above, the following values are supported for "ARCH": numeric r3000 r3900 r4000 r4010 vr4100 vr4111 vr4120 r4300 r4400 r4600 r4650 r5000 vr5400 vr5500 r5900 r6000 rm7000 rm9000 r8000 r10000 r12000 r14000 r16000 mips5 mips32 mips32r2 mips32r3 mips32r5 mips32r6 mips64 mips64r2 mips64r3 mips64r5 mips64r6 interaptiv-mr2 sb1 loongson2e loongson2f loongson3a octeon octeon+ octeon2 octeon3 xlr xlp (gdb) which corresponds to what `objdump --help' used to print for the MIPS target, with minor formatting changes, most notably option argument lists being wrapped, but also the amount of white space separating options from the respective descriptions. The relevant part the new code is now also used by `objdump --help', which means these formatting changes apply to both outputs, except for argument list wrapping, which is GDB-specific. This also adds a separating new line between the heading and option lists where descriptions are provided, hence: (gdb) set architecture s390:31-bit (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: esa Disassemble in ESA architecture mode zarch Disassemble in z/Architecture mode insnlength Print unknown instructions according to length from first two bits (gdb) but: (gdb) set architecture powerpc:common (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: 403, 405, 440, 464, 476, 601, 603, 604, 620, 7400, 7410, 7450, 7455, 750cl, 821, 850, 860, a2, altivec, any, booke, booke32, cell, com, e200z4, e300, e500, e500mc, e500mc64, e5500, e6500, e500x2, efs, efs2, power4, power5, power6, power7, power8, power9, ppc, ppc32, 32, ppc64, 64, ppc64bridge, ppcps, pwr, pwr2, pwr4, pwr5, pwr5x, pwr6, pwr7, pwr8, pwr9, pwrx, raw, spe, spe2, titan, vle, vsx (gdb) Existing affected target backends have been adjusted accordingly. This has been verified manually with: (gdb) set architecture arm (gdb) set architecture powerpc:common (gdb) set architecture s390:31-bit to cause no issues with the `show disassembler-options' and `set disassembler-options' commands. A test case for the MIPS target has also been provided, covering the default settings with ABI overrides as well as disassembler option overrides. 2018-07-02 Maciej W. Rozycki <macro@mips.com> Simon Marchi <simon.marchi@polymtl.ca> include/ PR tdep/8282 * dis-asm.h (disasm_option_arg_t): New typedef. (disasm_options_and_args_t): Likewise. (disasm_options_t): Add `arg' member, document members. (disassembler_options_mips): New prototype. (disassembler_options_arm, disassembler_options_powerpc) (disassembler_options_s390): Update prototypes. opcodes/ PR tdep/8282 * mips-dis.c (mips_option_arg_t): New enumeration. (mips_options): New variable. (disassembler_options_mips): New function. (print_mips_disassembler_options): Reimplement in terms of `disassembler_options_mips'. * arm-dis.c (disassembler_options_arm): Adapt to using the `disasm_options_and_args_t' structure. * ppc-dis.c (disassembler_options_powerpc): Likewise. * s390-dis.c (disassembler_options_s390): Likewise. gdb/ PR tdep/8282 * disasm.h (gdb_disassembler): Add `m_disassembler_options_holder'. member * disasm.c (get_all_disassembler_options): New function. (gdb_disassembler::gdb_disassembler): Use it. (gdb_buffered_insn_length_init_dis): Likewise. (gdb_buffered_insn_length): Adjust accordingly. (set_disassembler_options): Handle options with arguments. (show_disassembler_options_sfunc): Likewise. Add a leading new line if showing options with descriptions. (disassembler_options_completer): Adapt to using the `disasm_options_and_args_t' structure. * mips-tdep.c (mips_disassembler_options): New variable. (mips_disassembler_options_o32): Likewise. (mips_disassembler_options_n32): Likewise. (mips_disassembler_options_n64): Likewise. (gdb_print_insn_mips): Don't set `disassembler_options'. (gdb_print_insn_mips_n32, gdb_print_insn_mips_n64): Remove functions. (mips_gdbarch_init): Always set `gdbarch_print_insn' to `gdb_print_insn_mips'. Set `gdbarch_disassembler_options', `gdbarch_disassembler_options_implicit' and `gdbarch_valid_disassembler_options'. * arm-tdep.c (_initialize_arm_tdep): Adapt to using the `disasm_options_and_args_t' structure. * gdbarch.sh (disassembler_options_implicit): New `gdbarch' method. (valid_disassembler_options): Switch from `disasm_options_t' to the `disasm_options_and_args_t' structure. * NEWS: Document `set disassembler-options' support for the MIPS target. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. gdb/doc/ PR tdep/8282 * gdb.texinfo (Source and Machine Code): Document `set disassembler-options' support for the MIPS target. gdb/testsuite/ PR tdep/8282 * gdb.arch/mips-disassembler-options.exp: New test. * gdb.arch/mips-disassembler-options.s: New test source.	2018-07-02 23:57:21 +01:00
Pedro Alves	00431a78b2	Use thread_info and inferior pointers more throughout ... This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.	2018-06-21 17:09:31 +01:00
Simon Marchi	284a0e3cbf	Introduce obstack_new, poison other "typed" obstack functions ... Since we use obstacks with objects that are not default constructible, we sometimes need to manually call the constructor by hand using placement new: foo *f = obstack_alloc (obstack, sizeof (foo)); f = new (f) foo; It's possible to use allocate_on_obstack instead, but there are types that we sometimes want to allocate on an obstack, and sometimes on the regular heap. This patch introduces a utility to make this pattern simpler if allocate_on_obstack is not an option: foo *f = obstack_new<foo> (obstack); Right now there's only one usage (in tdesc_data_init). To help catch places where we would forget to call new when allocating such an object on an obstack, this patch also poisons some other methods of allocating an instance of a type on an obstack: - OBSTACK_ZALLOC/OBSTACK_CALLOC - XOBNEW/XOBNEW - GDBARCH_OBSTACK_ZALLOC/GDBARCH_OBSTACK_CALLOC Unfortunately, there's no way to catch wrong usages of obstack_alloc. By pulling on that string though, it tripped on allocating struct template_symbol using OBSTACK_ZALLOC. The criterion currently used to know whether it's safe to "malloc" an instance of a struct is whether it is a POD. Because it inherits from struct symbol, template_symbol is not a POD. This criterion is a bit too strict however, it should still safe to allocate memory for a template_symbol and memset it to 0. We didn't use is_trivially_constructible as the criterion in the first place only because it is not available in gcc < 5. So here I considered two alternatives: 1. Relax that criterion to use std::is_trivially_constructible and add a bit more glue code to make it work with gcc < 5 2. Continue pulling on the string and change how the symbol structures are allocated and initialized I managed to do both, but I decided to go with #1 to keep this patch simpler and more focused. When building with a compiler that does not have is_trivially_constructible, the check will just not be enforced. gdb/ChangeLog: * common/traits.h (HAVE_IS_TRIVIALLY_COPYABLE): Define if compiler supports std::is_trivially_constructible. * common/poison.h: Include obstack.h. (IsMallocable): Define to is_trivially_constructible if the compiler supports it, define to true_type otherwise. (xobnew): New. (XOBNEW): Redefine. (xobnewvec): New. (XOBNEWVEC): Redefine. * gdb_obstack.h (obstack_zalloc): New. (OBSTACK_ZALLOC): Redefine. (obstack_calloc): New. (OBSTACK_CALLOC): Redefine. (obstack_new): New. * gdbarch.sh: Include gdb_obstack in gdbarch.h. (gdbarch_obstack): New declaration in gdbarch.h, definition in gdbarch.c. (GDBARCH_OBSTACK_CALLOC, GDBARCH_OBSTACK_ZALLOC): Use obstack_calloc/obstack_zalloc. (gdbarch_obstack_zalloc): Remove. * target-descriptions.c (tdesc_data_init): Use obstack_new.	2018-05-20 21:06:36 -04:00
Tom Tromey	e11fb955fb	Remove long_long_align_bit gdbarch attribute ... This removes the long_long_align_bit gdbarch attribute in favor of type_align. This uncovered two possible issues. First, arc-tdep.c claimed that long long alignment was 32 bits, but as discussed on the list, ARC has a maximum alignment of 32 bits, so I've added an arc_type_align function to account for this. Second, jit.c, the sole user of long_long_align_bit, was confusing "long long" with uint64_t. The relevant structure is defined in the JIT API part of the manual as: struct jit_code_entry { struct jit_code_entry *next_entry; struct jit_code_entry *prev_entry; const char *symfile_addr; uint64_t symfile_size; }; I've changed this code to use uint64_t. 2018-04-30 Tom Tromey <tom@tromey.com> * jit.c (jit_read_code_entry): Use type_align. * i386-tdep.c (i386_gdbarch_init): Don't call set_gdbarch_long_long_align_bit. * gdbarch.sh: Remove long_long_align_bit. * gdbarch.c, gdbarch.h: Rebuild. * arc-tdep.c (arc_type_align): New function. (arc_gdbarch_init): Use arc_type_align. Don't call set_gdbarch_long_long_align_bit.	2018-04-30 11:25:32 -06:00
Tom Tromey	2b4424c35b	Add initial type alignment support ... This adds some basic type alignment support to gdb. It changes struct type to store the alignment, and updates dwarf2read.c to handle DW_AT_alignment. It also adds a new gdbarch method and updates i386-tdep.c. None of this new functionality is used anywhere yet, so tests will wait until the next patch. 2018-04-30 Tom Tromey <tom@tromey.com> * i386-tdep.c (i386_type_align): New function. (i386_gdbarch_init): Update. * gdbarch.sh (type_align): New method. * gdbarch.c, gdbarch.h: Rebuild. * arch-utils.h (default_type_align): Declare. * arch-utils.c (default_type_align): New function. * gdbtypes.h (TYPE_ALIGN_BITS): New define. (struct type) <align_log2>: New field. <instance_flags>: Now a bitfield. (TYPE_RAW_ALIGN): New macro. (type_align, type_raw_align, set_type_align): Declare. * gdbtypes.c (type_align, type_raw_align, set_type_align): New functions. * dwarf2read.c (quirk_rust_enum): Set type alignment. (get_alignment, maybe_set_alignment): New functions. (read_structure_type, read_enumeration_type, read_array_type) (read_set_type, read_tag_pointer_type, read_tag_reference_type) (read_subrange_type, read_base_type): Set type alignment.	2018-04-30 11:25:30 -06:00
Markus Metzger	1d509aa625	infrun: step through indirect branch thunks ... With version 7.3 GCC supports new options -mindirect-branch=<choice> -mfunction-return=<choice> The choices are: keep behaves as before thunk jumps through a thunk thunk-external jumps through an external thunk thunk-inline jumps through an inlined thunk For thunk and thunk-external, GDB would, on a call to the thunk, step into the thunk and then resume to its caller assuming that this is an undebuggable function. On a return thunk, GDB would stop inside the thunk. Make GDB step through such thunks instead. Before: Temporary breakpoint 1, main () at gdb.base/step-indirect-call-thunk.c:37 37 x = apply (inc, 41); (gdb) s apply (op=0x80483e6 <inc>, x=41) at gdb.base/step-indirect-call-thunk.c:29 29 return op (x); (gdb) 30 } After: Temporary breakpoint 1, main () at gdb.base/step-indirect-call-thunk.c:37 37 x = apply (inc, 41); (gdb) s apply (op=0x80483e6 <inc>, x=41) at gdb.base/step-indirect-call-thunk.c:29 29 return op (x); (gdb) inc (x=41) at gdb.base/step-indirect-call-thunk.c:23 23 return x + 1; This is independent of the step-mode. In order to step into the thunk, you would need to use stepi. When stepping over an indirect call thunk, GDB would first step through the thunk, then recognize that it stepped into a sub-routine and resume to the caller (of the thunk). Not sure whether this is worth optimizing. Thunk detection is implemented via gdbarch. I implemented the methods for IA. Other architectures may run into unexpected fails. The tests assume a fixed number of instruction steps to reach a thunk. This depends on the compiler as well as the architecture. They may need adjustments when we add support for more architectures. Or we can simply drop those tests that cover being able to step into thunks using instruction stepping. When using an older GCC, the tests will fail to build and will be reported as untested: Running .../gdb.base/step-indirect-call-thunk.exp ... gdb compile failed, \ gcc: error: unrecognized command line option '-mindirect-branch=thunk' gcc: error: unrecognized command line option '-mfunction-return=thunk' === gdb Summary === # of untested testcases 1 gdb/ * infrun.c (process_event_stop_test): Call gdbarch_in_indirect_branch_thunk. * gdbarch.sh (in_indirect_branch_thunk): New. * gdbarch.c: Regenerated. * gdbarch.h: Regenerated. * x86-tdep.h: New. * x86-tdep.c: New. * Makefile.in (ALL_TARGET_OBS): Add x86-tdep.o. (HFILES_NO_SRCDIR): Add x86-tdep.h. (ALLDEPFILES): Add x86-tdep.c. * arch-utils.h (default_in_indirect_branch_thunk): New. * arch-utils.c (default_in_indirect_branch_thunk): New. * i386-tdep: Include x86-tdep.h. (i386_in_indirect_branch_thunk): New. (i386_elf_init_abi): Set in_indirect_branch_thunk gdbarch function. * amd64-tdep: Include x86-tdep.h. (amd64_in_indirect_branch_thunk): New. (amd64_init_abi): Set in_indirect_branch_thunk gdbarch function. testsuite/ * gdb.base/step-indirect-call-thunk.exp: New. * gdb.base/step-indirect-call-thunk.c: New. * gdb.reverse/step-indirect-call-thunk.exp: New. * gdb.reverse/step-indirect-call-thunk.c: New.	2018-04-13 10:44:47 +02:00
Tom Tromey	281d762b1a	Remove cleanups from check_fast_tracepoint_sals ... This changes the gdbarch fast_tracepoint_valid_at method to use a std::string as its out parameter, and then updates all the uses. This allows removing a cleanup from breakpoint.c. Regression tested by the buildbot. ChangeLog 2018-02-24 Tom Tromey <tom@tromey.com> * i386-tdep.c (i386_fast_tracepoint_valid_at): "msg" now a std::string. * gdbarch.sh (fast_tracepoint_valid_at): Change "msg" to a std::string*. * gdbarch.c: Rebuild. * gdbarch.h: Rebuild. * breakpoint.c (check_fast_tracepoint_sals): Use std::string. * arch-utils.h (default_fast_tracepoint_valid_at): Update. * arch-utils.c (default_fast_tracepoint_valid_at): "msg" now a std::string*.	2018-02-24 10:01:11 -07:00
Yao Qi	c113ed0ca2	Pass readable_regcache to gdbarch method read_pc ... We can pass readable_regcache to gdbarch method read_pc where it is allowed to do read from regcache. gdb: 2018-02-21 Yao Qi <yao.qi@linaro.org> * avr-tdep.c (avr_read_pc): Change parameter type to readable_regcache. * gdbarch.sh (read_pc): Likewise. * gdbarch.c: Re-generated. * gdbarch.h: Re-generated. * hppa-tdep.c (hppa_read_pc): Change parameter type to readable_regcache. * ia64-tdep.c (ia64_read_pc): Likewise. * mips-tdep.c (mips_read_pc): Likewise. * spu-tdep.c (spu_read_pc): Likewise.	2018-02-21 11:20:03 +00:00
Yao Qi	849d0ba802	class readable_regcache and pass readable_regcache to gdbarch pseudo_register_read and pseudo_register_read_value ... pseudo registers are either from raw registers or memory, so gdbarch methods pseudo_register_read and pseudo_register_read_value should have regcache object which only have read methods. In other words, we should disallow writing to regcache in these two gdbarch methods. In order to apply this restriction, this patch adds a new class readable_regcache, derived from reg_buffer, and it only has raw_read and cooked_read methods. regcache is derived from readable_regcache. This patch also passes readable_regcache instead of regcache to gdbarch methods pseudo_register_read and pseudo_register_read_value. This patch moves raw_read* and cooked_read* methods to readable_regcache, which is straightforward. One thing not straightforward is that I split regcache::xfer_part to readable_regcache::read_part and regcache::write_part, because readable_regcache can only have methods to read. readable_regcache is an abstract base class, and it has a pure virtual function raw_update, because I don't want readable_regcache know where these raw registers are from. They can be from either the target (readwrite regcache) or the regcache itself (readonly regcache). gdb: 2018-02-21 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_pseudo_register_read_value): Change parameter type to 'readable_regcache *'. * amd64-tdep.c (amd64_pseudo_register_read_value): Likewise. * arm-tdep.c (arm_neon_quad_read): Likewise. (arm_pseudo_read): Likewise. * avr-tdep.c (avr_pseudo_register_read): Likewise. * bfin-tdep.c (bfin_pseudo_register_read): Likewise. * frv-tdep.c (frv_pseudo_register_read): Likewise. * gdbarch.c: Re-generated. * gdbarch.h: Re-generated. * gdbarch.sh (pseudo_register_read): Change parameter type to 'readable_regcache *'. (pseudo_register_read_value): Likewise. * h8300-tdep.c (pseudo_from_raw_register): Likewise. (h8300_pseudo_register_read): Likewise. * hppa-tdep.c (hppa_pseudo_register_read): Likewise. * i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise. (i386_pseudo_register_read_into_value): Likewise. (i386_pseudo_register_read_value): Likewise. * i386-tdep.h (i386_pseudo_register_read_into_value): Update declaration. * ia64-tdep.c (ia64_pseudo_register_read): Likewise. * m32c-tdep.c (m32c_raw_read): Likewise. (m32c_read_flg): Likewise. (m32c_banked_register): Likewise. (m32c_banked_read): Likewise. (m32c_sb_read): Likewise. (m32c_part_read): Likewise. (m32c_cat_read): Likewise. (m32c_r3r2r1r0_read): Likewise. (m32c_pseudo_register_read): Likewise. * m68hc11-tdep.c (m68hc11_pseudo_register_read): Likewise. * mep-tdep.c (mep_pseudo_cr32_read): Likewise. (mep_pseudo_cr64_read): Likewise. (mep_pseudo_register_read): Likewise. * mips-tdep.c (mips_pseudo_register_read): Likewise. * msp430-tdep.c (msp430_pseudo_register_read): Likewise. * nds32-tdep.c (nds32_pseudo_register_read): Likewise. * regcache.c (regcache::raw_read): Move it to readable_regcache. (regcache::cooked_read): Likewise. (regcache::cooked_read_value): Likewise. (regcache_cooked_read_signed): (regcache::cooked_read): Likewise. * regcache.h (readable_regcache): New class. (regcache): Inherit readable_regcache. Move some methods to readable_regcache. * rl78-tdep.c (rl78_pseudo_register_read): Change parameter type to 'readable_regcache *'. * rs6000-tdep.c (do_regcache_raw_read): Remove. (e500_pseudo_register_read): Change parameter type to 'readable_regcache *'. (dfp_pseudo_register_read): Likewise. (vsx_pseudo_register_read): Likewise. (efpr_pseudo_register_read): Likewise. * s390-tdep.c (s390_pseudo_register_read): Likewise. * sh-tdep.c (sh_pseudo_register_read): Likewise. * sh64-tdep.c (pseudo_register_read_portions): Likewise. (sh64_pseudo_register_read): Likewise. * sparc-tdep.c (sparc32_pseudo_register_read): Likewise. * sparc64-tdep.c (sparc64_pseudo_register_read): Likewise. * spu-tdep.c (spu_pseudo_register_read_spu): Likewise. (spu_pseudo_register_read): Likewise. * xtensa-tdep.c (xtensa_register_read_masked): Likewise. (xtensa_pseudo_register_read): Likewise.	2018-02-21 11:20:03 +00:00
Joel Brobecker	e2882c8578	Update copyright year range in all GDB files ... gdb/ChangeLog: Update copyright year range in all GDB files	2018-01-02 07:38:06 +04:00
Yao Qi	a738ea1d41	Clear non-significant bits of address on memory access ... ARMv8 supports tagged address, that is, the top one byte in address is ignored. It is always enabled on aarch64-linux. See https://www.kernel.org/doc/Documentation/arm64/tagged-pointers.txt The tag in the tagged address is modeled as non-significant bits in address, so this patch adds a new gdbarch method significant_addr_bit and clear the non-significant bits (the top byte in ARMv8) of the virtual address at the point before passing address to target cache layer. IOW, the address used in the target cache layer is already cleared. Before this patch, (gdb) x/x 0x0000000000411030 0x411030 <global>: 0x00000000 (gdb) x/x 0xf000000000411030 0xf000000000411030: Cannot access memory at address 0xf000000000411030 After this patch, (gdb) x/x 0x0000000000411030 0x411030 <global>: 0x00000000 (gdb) x/x 0xf000000000411030 0xf000000000411030: 0x00000000 Note that I used address_significant in paddress, but it causes a regression gdb.base/long_long.exp, because gdb clears the non-significant bits in address, but test still expects them. p/a val.oct^M $24 = 0x2ee53977053977^M (gdb) FAIL: gdb.base/long_long.exp: p/a val.oct so I defer the change there. gdb: 2017-12-08 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_gdbarch_init): Install gdbarch significant_addr_bit. * gdbarch.sh (significant_addr_bit): New. * gdbarch.c, gdbarch.h: Re-generated. * target.c (memory_xfer_partial): Call address_significant. * utils.c (address_significant): New function. * utils.h (address_significant): Declare. 2017-12-08 Yao Qi <yao.qi@linaro.org> gdb/testsuite: * gdb.arch/aarch64-tagged-pointer.c: New file. * gdb.arch/aarch64-tagged-pointer.exp: New file.	2017-12-08 17:27:03 +00:00
Simon Marchi	c2508e905f	Remove simple_displaced_step_copy_insn ... Nothing uses this function. Remove it, and adjust comments referring to it. gdb/ChangeLog: * arch-utils.h (simple_displaced_step_copy_insn): Remove. * arch-utils.c (simple_displaced_step_copy_insn): Remove. * gdbarch.sh (displaced_step_copy_insn): Adjust comment. * gdbarch.h: Regenerate. * i386-linux-tdep.c (i386_linux_displaced_step_copy_insn): Adjust comment. * i386-tdep.c (i386_displaced_step_copy_insn): Adjust comment. (i386_displaced_step_fixup): Adjust comment. * rs6000-tdep.c (ppc_displaced_step_copy_insn): Adjust comment.	2017-10-12 21:42:23 -04:00
Maciej W. Rozycki	fe22022617	GDB: Remove Linux core PRPSINFO note writer override ... Revert parts of commit b3ac9c7756 ("Put more info in NT_PRPSINFO Linux notes"), <https://sourceware.org/ml/binutils/2013-02/msg00024.html>, and remove support for a Linux core PRPSINFO note writer override, now that all variants are handled automatically within BFD itself. gdb/ * linux-tdep.c (linux_make_corefile_notes): Remove call to `gdbarch_elfcore_write_linux_prpsinfo'. * gdbarch.sh (elfcore_write_linux_prpsinfo): Remove architecture method. (elf_internal_linux_prpsinfo): Remove declaration. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate.	2017-10-11 15:01:41 +01:00
Maciej W. Rozycki	db8dd1601e	gdbarch: Remove duplicate `struct objfile' declaration ... Remove a duplicate `struct objfile' declaration mistakenly added with commit 3e29f34a4e ("MIPS: Keep the ISA bit in compressed code addresses"). gdb/ * gdbarch.sh (objfile): Remove duplicate declaration. * gdbarch.h: Regenerate.	2017-10-03 23:46:28 +01:00
Maciej W. Rozycki	0dba2a6c09	gdbarch: Use an anonymous union for target data in `gdbarch_info' ... As an update to commit ede5f15146 ("gdbarch.h: Change gdbarch_info::tdep_info's type to void *") replace the definition of the `tdep_info' member in `struct gdbarch_info' with an anonymous union, comprising the original member, with its type reverted to `struct gdbarch_tdep_info *', a `tdesc_data' member of a `struct tdesc_arch_data *' type and an `id' member of an `int *' type. Remove now unnecessary casts throughout use places then, making code easier to read an less prone to errors, which may happen with casting. gdb/ * gdbarch.sh (gdbarch_info): Replace the `tdep_info' member with a union of `tdep_info', `tdesc_data' and `id'. * aarch64-tdep.c (aarch64_gdbarch_init): Use `info.tdesc_data' rather than `info.tdep_info'. * amd64-linux-tdep.c (amd64_linux_init_abi): Likewise. * i386-linux-tdep.c (i386_linux_init_abi): Likewise. * i386-tdep.c (i386_gdbarch_init): Likewise. * mips-linux-tdep.c (mips_linux_init_abi): Likewise. * mips-tdep.c (mips_gdbarch_init): Likewise. * nds32-tdep.c (nds32_gdbarch_init): Likewise. * rs6000-tdep.c (rs6000_gdbarch_init): Likewise. * ppc-linux-tdep.c (ppu2spu_sniffer): Use `info.id' rather than `info.tdep_info'. (ppc_linux_init_abi): Use `info.tdesc_data' rather than `info.tdep_info'. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * spu-multiarch.c (spu_gdbarch): Use `info.id' rather than `info.tdep_info'. * spu-tdep.c (spu_gdbarch_init): Likewise. * gdbarch.h: Regenerate.	2017-08-07 15:53:54 +01:00
John Baldwin	382b69bbb7	Add a new gdbarch method to fetch signal information from core files. ... Previously the core_xfer_partial method used core_get_siginfo to handle TARGET_OBJECT_SIGNAL_INFO requests. However, core_get_siginfo looked for Linux-specific sections in the core file. To support fetching siginfo from cores on other systems, add a new gdbarch method (`core_xfer_siginfo`) and move the body of the existing core_get_siginfo into a linux_core_xfer_siginfo implementation of this method in linux-tdep.c. gdb/ChangeLog: * corelow.c (get_core_siginfo): Remove. (core_xfer_partial): Use the gdbarch "core_xfer_siginfo" method instead of get_core_siginfo. * gdbarch.sh (core_xfer_siginfo): New gdbarch callback. * gdbarch.h: Re-generate. * gdbarch.c: Re-generate. * linux-tdep.c (linux_core_xfer_siginfo): New. (linux_init_abi): Install gdbarch "core_xfer_siginfo" method.	2017-07-07 16:08:33 -07:00
Simon Marchi	6d45d4b42b	gdbarch: Remove displaced_step_free_closure ... The displaced_step_free_closure gdbarch hook allows architectures to free data they might have allocated to complete a displaced step. However, all architectures using that hook use the simple_displaced_step_free_closure provided in arch-utils.{c,h}, which does a simple xfree. We can remove it and do an xfree directly instead of calling the hook. gdb/ChangeLog: * gdbarch.sh (displaced_step_free_closure): Remove. * gdbarch.h, gdbarch.c: Re-generate. * aarch64-linux-tdep.c (aarch64_linux_init_abi): Don't set displaced_step_free_closure. * amd64-linux-tdep.c (amd64_linux_init_abi_common): Likewise. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * i386-linux-tdep.c (i386_linux_init_abi): Likewise. * rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise. * rs6000-tdep.c (rs6000_gdbarch_init): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * arch-utils.h (simple_displaced_step_free_closure): Remove. * arch-utils.c (simple_displaced_step_free_closure): Remove. * infrun.c (displaced_step_clear): Call xfree instead of gdbarch_displaced_step_free_closure.	2017-06-10 00:24:50 +02:00
Simon Marchi	35837774a7	gdbarch.sh: Remove commented out TARGET_CHAR_BIT definition ... As Pedro commented on the patch "Change field separator in gdbarch.sh", this commented out definition is probably not useful and should be removed. It has been commented out for basically forever, and it probably serves the same intent as addressable_memory_unit_size. gdb/ChangeLog: * gdbarch.sh: Remove commented out definition of TARGET_CHAR_BIT. * gdbarch.h: Re-generate.	2017-05-03 09:21:27 -04:00
Simon Marchi	a0ff9e1ad2	Change return type of gdbarch_software_single_step to vector<CORE_ADDR> ... This is a relatively straightforward patch that changes gdbarch_software_single_step so it returns an std::vector<CORE_ADDR> instead of a VEC (CORE_ADDR). gdb/ChangeLog: * gdbarch.sh (software_single_step): Change return type to std::vector<CORE_ADDR>. * gdbarch.c, gdbarch.h: Re-generate. * arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw): Adjust. (arm_deal_with_atomic_sequence_raw): Adjust. (thumb_get_next_pcs_raw): Adjust. (arm_get_next_pcs_raw): Adjust. (arm_get_next_pcs): Adjust. * arch/arm-get-next-pcs.h (arm_get_next_pcs): Adjust. * aarch64-tdep.c (aarch64_software_single_step): Adjust. * alpha-tdep.c (alpha_deal_with_atomic_sequence): Adjust. (alpha_software_single_step): Adjust. * alpha-tdep.h (alpha_software_single_step): Adjust. * arm-linux-tdep.c (arm_linux_software_single_step): Adjust. * arm-tdep.c (arm_software_single_step): Adjust. (arm_breakpoint_kind_from_current_state): Adjust. * arm-tdep.h (arm_software_single_step): Adjust. * breakpoint.c (insert_single_step_breakpoint): Adjust. * cris-tdep.c (cris_software_single_step): Adjust. * mips-tdep.c (mips_deal_with_atomic_sequence): Adjust. (micromips_deal_with_atomic_sequence): Adjust. (deal_with_atomic_sequence): Adjust. (mips_software_single_step): Adjust. * mips-tdep.h (mips_software_single_step): Adjust. * moxie-tdep.c (moxie_software_single_step): Adjust. * nios2-tdep.c (nios2_software_single_step): Adjust. * ppc-tdep.h (ppc_deal_with_atomic_sequence): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * s390-linux-tdep.c (s390_software_single_step): Adjust. * sparc-tdep.c (sparc_software_single_step): Adjust. * spu-tdep.c (spu_software_single_step): Adjust. * tic6x-tdep.c (tic6x_software_single_step): Adjust. gdb/gdbserver/ChangeLog: * linux-arm-low.c (arm_gdbserver_get_next_pcs): Adjust to software_single_step change of return type to std::vector<CORE_ADDR>. * linux-low.c (install_software_single_step_breakpoints): Likewise. * linux-low.h (install_software_single_step_breakpoints): Likewise.	2017-05-02 13:30:07 -04:00
Simon Marchi	ea480a306d	Change field separator in gdbarch.sh ... The fields in the description of the gdbarch interface are separated using colons. That becomes a problem if we want to use things like std::vector in it. This patch changes the field separator to use semicolons instead. I think there's very little chance we'll ever want to use a semicolon in one of the fields, but if you think another character would be more appropriate, let me know. gdb/ChangeLog: * gdbarch.sh: Use semi-colon as field separator instead of colon. * gdbarch.h: Re-generate.	2017-05-02 13:30:07 -04:00
Jiong Wang	b41c5a85a7	[gdbarch] New method "execute_dwarf_cfa_vendor_op" and migrate SPARC to it ... Recently a feature called "return address signing" has been added to GCC to prevent stack smash stack on AArch64. For details please refer: https://gcc.gnu.org/ml/gcc-patches/2017-01/msg00376.html GDB needs to be aware of this feature so it can restore the original return address which is critical for unwinding. On compiler side, whenever return address, i.e. LR register, is mangled or restored by hardware instruction, compiler is expected to generate a DW_CFA_AARCH64_negate_ra_state to toggle return address signing status. DW_CFA_AARCH64_negate_ra_state is using the same CFI number and therefore need to be multiplexed with DW_CFA_GNU_window_save which was designed for SPARC. A new gdbarch method "execute_dwarf_cfa_vendor_op" is introduced by this patch. It's parameters has been restricted to those only needed by SPARC and AArch64 for multiplexing DW_CFA_GNU_window_save which is a CFI operation takes none operand. Should any further DWARF CFI operation want to be multiplexed in the future, the parameter list can be extended. Below is the current function prototype. typedef int (gdbarch_execute_dwarf_cfa_vendor_op_ftype) (struct gdbarch *gdbarch, gdb_byte op, struct dwarf2_frame_state *fs); DW_CFA_GNU_window_save support for SPARC is migrated to this new gdbarch method by this patch. gdb/ * gdbarch.sh: New gdbarch method execute_dwarf_cfa_vendor_op. * gdbarch.c: Regenerated. * gdbarch.h: Regenerated. * dwarf2-frame.c (dwarf2_frame_state_alloc_regs): Made the visibility external. (execute_cfa_program): Call execute_dwarf_cfa_vendor_op for CFI between DW_CFA_lo_user and DW_CFA_high_user inclusive. (enum cfa_how_kind): Move to ... (struct dwarf2_frame_state_reg_info): Likewise. (struct dwarf2_frame_state): Likewise. * dwarf2-frame.h: ... here. (dwarf2_frame_state_alloc_regs): New declaration. * sparc-tdep.c (sparc_execute_dwarf_cfa_vendor_op): New function. (sparc32_gdbarch_init): Register execute_dwarf_cfa_vendor_op hook.	2017-04-26 14:05:03 +01:00
Pedro Alves	53375380e9	Teach GDB that wchar_t is a built-in type in C++ mode ... GDB is currently not aware that wchar_t is a built-in type in C++ mode. This is usually not a problem because the debug info describes the type, so when you have a program loaded, you don't notice this. However, if you try expressions involving wchar_t before a program is loaded, gdb errors out: (gdb) p (wchar_t)-1 No symbol table is loaded. Use the "file" command. (gdb) p L"hello" No type named wchar_t. (gdb) ptype L"hello" No type named wchar_t. This commit teaches gdb about the type. After: (gdb) p (wchar_t)-1 $1 = -1 L'\xffffffff' (gdb) p L"hello" $2 = L"hello" (gdb) ptype L"hello" type = wchar_t [6] Unlike char16_t/char32_t, unfortunately, the underlying type of wchar_t is implementation dependent, both size and signness. So this requires adding a couple new gdbarch hooks. I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it seems to me that the majority of the ABIs have a 4-byte signed wchar_t, so that's what I made the default for GDB too. And then I looked for which ports have a 16-bit and/or unsigned wchar_t, and made GDB follow suit. gdb/ChangeLog: 2017-04-12 Pedro Alves <palves@redhat.com> PR gdb/21323 * c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>: New enum value. (cplus_language_arch_info): Register cplus_primitive_type_wchar_t. * gdbtypes.h (struct builtin_type) <builtin_wchar>: New field. * gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type. * gdbarch.sh (wchar_bit, wchar_signed): New per-arch values. * gdbarch.h, gdbarch.c: Regenerate. * aarch64-tdep.c (aarch64_gdbarch_init): Override gdbarch_wchar_bit and gdbarch_wchar_signed. * alpha-tdep.c (alpha_gdbarch_init): Likewise. * arm-tdep.c (arm_gdbarch_init): Likewise. * avr-tdep.c (avr_gdbarch_init): Likewise. * h8300-tdep.c (h8300_gdbarch_init): Likewise. * i386-nto-tdep.c (i386nto_init_abi): Likewise. * i386-tdep.c (i386_go32_init_abi): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * nds32-tdep.c (nds32_gdbarch_init): Likewise. * rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise. * sh-tdep.c (sh_gdbarch_init): Likewise. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * sparc64-tdep.c (sparc64_init_abi): Likewise. * windows-tdep.c (windows_init_abi): Likewise. * xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise. gdb/testsuite/ChangeLog: 2017-04-12 Pedro Alves <palves@redhat.com> PR gdb/21323 * gdb.cp/wide_char_types.c: Include <wchar.h>. (wchar): New global. * gdb.cp/wide_char_types.exp (wide_char_types_program) (do_test_wide_char, wide_char_types_no_program, top level): Add wchar_t testing.	2017-04-12 14:06:40 +01:00
Pedro Alves	7a1149643d	-Wwrite-strings: Constify target_pid_to_str and target_thread_extra_thread_info ... -Wwrite-strings flagged a missing cast for example here: static char * ravenscar_extra_thread_info (struct target_ops *self, struct thread_info *tp) { return "Ravenscar task"; Since callers are not supposed to free the string returned by these methods, change the methods' signature to return const strings. gdb/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * aix-thread.c (aix_thread_pid_to_str) (aix_thread_extra_thread_info): Constify. * bsd-kvm.c (bsd_kvm_pid_to_str): Constify. * bsd-uthread.c (bsd_uthread_extra_thread_info) (bsd_uthread_pid_to_str): Constify. * corelow.c (core_pid_to_str): Constify. * darwin-nat.c (darwin_pid_to_str): Constify. * fbsd-nat.c (fbsd_pid_to_str): Constify. * fbsd-tdep.c (fbsd_core_pid_to_str, gdbarch_core_pid_to_str): Constify. * gnu-nat.c (gnu_pid_to_str): Constify. * go32-nat.c (go32_pid_to_str): Constify. * i386-cygwin-tdep.c (i386_windows_core_pid_to_str): Constify. * inf-ptrace.c (inf_ptrace_pid_to_str): Constify. * inferior.c (inferior_pid_to_str): Constify. * linux-nat.c (linux_nat_pid_to_str): Constify. * linux-tdep.c (linux_core_pid_to_str): Constify. * linux-thread-db.c (thread_db_pid_to_str) (thread_db_extra_thread_info): Constify. * nto-tdep.c (nto_extra_thread_info): Constify. * nto-tdep.h (nto_extra_thread_info): Constify. * obsd-nat.c (obsd_pid_to_str): Constify. * procfs.c (procfs_pid_to_str): Constify. * ravenscar-thread.c (ravenscar_extra_thread_info) (ravenscar_pid_to_str): Constify. * remote-sim.c (gdbsim_pid_to_str): Constify. * remote.c (remote_threads_extra_info, remote_pid_to_str): Constify. * sol-thread.c (solaris_pid_to_str): Constify. * sol2-tdep.c (sol2_core_pid_to_str): Constify. * sol2-tdep.h (sol2_core_pid_to_str): Constify. * target.c (default_pid_to_str, target_pid_to_str) (normal_pid_to_str, default_pid_to_str): Constify. * target.h (target_ops::to_pid_to_str) (target_ops::to_extra_thread_info): Constify. (target_pid_to_str, normal_pid_to_str): Constify. * windows-nat.c (windows_pid_to_str): Constify. * gdbarch.sh (core_pid_to_str): Constify. * target-delegates.c: Regenerate. * gdbarch.h, gdbarch.c: Regenerate.	2017-04-05 19:21:34 +01:00
Peter Bergner	65b48a8140	GDB: Add support for the new set/show disassembler-options commands. ... This commit adds support to GDB so that it can modify the disassembler-options value that is passed to the disassembler, similar to objdump's -M option. Currently, the only supported targets are ARM, PowerPC and S/390, but adding support for a new target(s) is not difficult. include/ * dis-asm.h (disasm_options_t): New typedef. (parse_arm_disassembler_option): Remove prototype. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (get_arm_regname_num_options): Likewise. (disassemble_init_s390): New prototype. (disassembler_options_powerpc): Likewise. (disassembler_options_arm): Likewise. (disassembler_options_s390): Likewise. (remove_whitespace_and_extra_commas): Likewise. (disassembler_options_cmp): Likewise. (next_disassembler_option): New inline function. (FOR_EACH_DISASSEMBLER_OPTION): New macro. opcodes/ * disassemble.c Include "safe-ctype.h". (disassemble_init_for_target): Handle s390 init. (remove_whitespace_and_extra_commas): New function. (disassembler_options_cmp): Likewise. * arm-dis.c: Include "libiberty.h". (NUM_ELEM): Delete. (regnames): Use long disassembler style names. Add force-thumb and no-force-thumb options. (NUM_ARM_REGNAMES): Rename from this... (NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE. (get_arm_regname_num_options): Delete. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (parse_disassembler_options): Likewise. (parse_arm_disassembler_option): Rename from this... (parse_arm_disassembler_options): ...to this. Make static. Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options. (print_insn): Use parse_arm_disassembler_options. (disassembler_options_arm): New function. (print_arm_disassembler_options): Handle updated regnames. * ppc-dis.c: Include "libiberty.h". (ppc_opts): Add "32" and "64" entries. (ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp. (powerpc_init_dialect): Add break to switch statement. Use new FOR_EACH_DISASSEMBLER_OPTION macro. (disassembler_options_powerpc): New function. (print_ppc_disassembler_options): Use ARRAY_SIZE. Remove printing of "32" and "64". * s390-dis.c: Include "libiberty.h". (init_flag): Remove unneeded variable. (struct s390_options_t): New structure type. (options): New structure. (init_disasm): Rename from this... (disassemble_init_s390): ...to this. Add initializations for current_arch_mask and option_use_insn_len_bits_p. Remove init_flag. (print_insn_s390): Delete call to init_disasm. (disassembler_options_s390): New function. (print_s390_disassembler_options): Print using information from struct 'options'. * po/opcodes.pot: Regenerate. binutils/ * objdump.c (main): Use remove_whitespace_and_extra_commas. gdb/ * NEWS: Mention new set/show disassembler-options commands. * doc/gdb.texinfo: Document new set/show disassembler-options commands. * disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h". (prospective_options): New static variable. (gdb_disassembler::gdb_disassembler): Initialize m_di.disassembler_options. (gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options. (get_disassembler_options): New function. (set_disassembler_options): Likewise. (set_disassembler_options_sfunc): Likewise. (show_disassembler_options_sfunc): Likewise. (disassembler_options_completer): Likewise. (_initialize_disasm): Likewise. * disasm.h (get_disassembler_options): New prototype. (set_disassembler_options): Likewise. * gdbarch.sh (gdbarch_disassembler_options): New variable. (gdbarch_verify_disassembler_options): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * arm-tdep.c (num_disassembly_options): Delete. (set_disassembly_style): Likewise. (arm_disassembler_options): New static variable. (set_disassembly_style_sfunc): Convert short style name into long option name. Call set_disassembler_options. (show_disassembly_style_sfunc): New function. (arm_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. (_initialize_arm_tdep): Delete regnames variable and update callers. (arm_disassembler_options): Initialize. (disasm_options): New variable. (num_disassembly_options): Rename from this... (num_disassembly_styles): ...to this. Compute by scanning through disasm_options. (valid_disassembly_styles): Initialize using disasm_options. Remove calls to parse_arm_disassembler_option, get_arm_regnames and set_arm_regname_option. Pass show_disassembly_style_sfunc to the "disassembler" setshow command. * rs6000-tdep.c (powerpc_disassembler_options): New static variable. (rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. * s390-tdep.c (s390_disassembler_options): New static variable. (s390_gdbarch_init):all set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. gdb/testsuite/ * gdb.arch/powerpc-power.exp: Delete test. * gdb.arch/powerpc-power.s: Likewise. * gdb.disasm/disassembler-options.exp: New test. * gdb.arch/powerpc-altivec.exp: Likewise. * gdb.arch/powerpc-altivec.s: Likewise. * gdb.arch/powerpc-altivec2.exp: Likewise. * gdb.arch/powerpc-altivec2.s: Likewise. * gdb.arch/powerpc-altivec3.exp: Likewise. * gdb.arch/powerpc-altivec3.s: Likewise. * gdb.arch/powerpc-power7.exp: Likewise. * gdb.arch/powerpc-power7.s: Likewise. * gdb.arch/powerpc-power8.exp: Likewise. * gdb.arch/powerpc-power8.s: Likewise. * gdb.arch/powerpc-power9.exp: Likewise. * gdb.arch/powerpc-power9.s: Likewise. * gdb.arch/powerpc-vsx.exp: Likewise. * gdb.arch/powerpc-vsx.s: Likewise. * gdb.arch/powerpc-vsx2.exp: Likewise. * gdb.arch/powerpc-vsx2.s: Likewise. * gdb.arch/powerpc-vsx3.exp: Likewise. * gdb.arch/powerpc-vsx3.s: Likewise. * gdb.arch/arm-disassembler-options.exp: Likewise. * gdb.arch/powerpc-disassembler-options.exp: Likewise. * gdb.arch/s390-disassembler-options.exp: Likewise.	2017-02-28 12:32:07 -06:00
Joel Brobecker	61baf725ec	update copyright year range in GDB files ... This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.	2017-01-01 10:52:34 +04:00
Yao Qi	f5ea389ac7	Change gdbarch software_single_step frame_info to regcache ... This patch changes gdbarch method software_single_step's parameter from "struct frame_info *" to "struct regcache *, IOW, software_single_step starts to use current regcache rather than current frame for software single. gdb: 2016-11-22 Yao Qi <yao.qi@linaro.org> * gdbarch.sh (software_single_step): Change parameter from frame_info to regcache. * gdbarch.c, gdbarch.h: Regenerated. * aarch64-tdep.c (aarch64_software_single_step): Change parameter from frame_info to regcache. Don't call get_current_regcache. * alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise. (alpha_software_single_step): Likewise. * alpha-tdep.h (alpha_software_single_step): Update declaration. * arm-linux-tdep.c (arm_linux_software_single_step): Likewise. * arm-tdep.c (arm_software_single_step): Likewise. * arm-tdep.h (arm_software_single_step): Likewise. * breakpoint.c (insert_single_step_breakpoint): Pass regcache to gdbarch_software_single_step. * cris-tdep.c (cris_software_single_step): Change parameter from frame_info to regcache. Don't call get_current_regcache. * mips-tdep.c (mips_software_single_step): Likewise. * mips-tdep.h (mips_software_single_step): Update declaration. * moxie-tdep.c (moxie_software_single_step): Likewise. * nios2-tdep.c (nios2_software_single_step): Likewise. * ppc-tdep.h (ppc_deal_with_atomic_sequence): Update declaration. * rs6000-aix-tdep.c (rs6000_software_single_step): Likewise. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise. * s390-linux-tdep.c (s390_software_single_step): Likewise. * sparc-tdep.c (sparc_software_single_step): Likewise. * spu-tdep.c (spu_software_single_step): Likewise. * tic6x-tdep.c (tic6x_software_single_step): Likewise.	2016-11-22 14:30:50 +00:00
Yao Qi	93f9a11fbd	gdbarch software_single_step returns VEC (CORE_ADDR) * ... This patch changes gdbarch method software_single_step to return a vector of addresses on which GDB should insert breakpoints, and don't insert breakpoints. Instead, the caller of gdbarch_software_single_step inserts breakpoints if the returned vector is not NULL. gdb: 2016-11-08 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_software_single_step): Return VEC (CORE_ADDR) *. Return NULL instead of 0. Don't call insert_single_step_breakpoint. * alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise. (alpha_software_single_step): Likewise. * alpha-tdep.h (alpha_software_single_step): Update declaration. * arm-linux-tdep.c (arm_linux_software_single_step): Return VEC (CORE_ADDR) *. Return NULL instead of 0. * arm-tdep.c (arm_software_single_step): Return NULL instead of 0. * arm-tdep.h (arm_software_single_step): Update declaration. * breakpoint.c (insert_single_step_breakpoints): New function. * breakpoint.h (insert_single_step_breakpoints): Declare. * cris-tdep.c (cris_software_single_step): Return VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint. * gdbarch.sh (software_single_step): Change it to return VEC (CORE_ADDR) *. * gdbarch.c, gdbarch.h: Regenerated. * infrun.c (maybe_software_singlestep): Adjust. * mips-tdep.c (mips_deal_with_atomic_sequence): Return VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint. (micromips_deal_with_atomic_sequence): Likewise. (deal_with_atomic_sequence): Likewise. (mips_software_single_step): Likewise. * mips-tdep.h (mips_software_single_step): Update declaration. * moxie-tdep.c (moxie_software_single_step): Likewise. * nios2-tdep.c (nios2_software_single_step): Likewise. * ppc-tdep.h (ppc_deal_with_atomic_sequence): Update declaration. * record-full.c (record_full_resume): Adjust. (record_full_wait_1): Likewise. * rs6000-aix-tdep.c (rs6000_software_single_step): Return VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Return VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint. * s390-linux-tdep.c (s390_software_single_step): Likewise. * sparc-tdep.c (sparc_software_single_step): Likewise. * spu-tdep.c (spu_software_single_step): Likewise. * tic6x-tdep.c (tic6x_software_single_step): Likewise.	2016-11-08 14:28:32 +00:00
Yao Qi	833b7ab500	Determine the kind of single step breakpoint ... This patch adds a new gdbarch method breakpoint_kind_from_current_state for single step breakpoint, and uses it in breakpoint_kind. gdb: 2016-11-03 Yao Qi <yao.qi@linaro.org> * arch-utils.c (default_breakpoint_kind_from_current_state): New function. * arch-utils.h (default_breakpoint_kind_from_current_state): Declare. * arm-tdep.c (arm_breakpoint_kind_from_current_state): New function. (arm_gdbarch_init): Call set_gdbarch_breakpoint_kind_from_current_state. * breakpoint.c (breakpoint_kind): Call gdbarch_breakpoint_kind_from_current_state for single step breakpoint. Update comments. * gdbarch.sh (breakpoint_kind_from_current_state): New. * gdbarch.c, gdbarch.h: Regenerate.	2016-11-03 14:35:14 +00:00
Yao Qi	c0f4a997c2	Remove gdbarch_remote_breakpoint_from_pc ... This patch removes gdbarch method remote_breakpoint_from_pc, as it is no longer used. gdb: 2016-11-03 Yao Qi <yao.qi@linaro.org> * arch-utils.c (default_remote_breakpoint_from_pc): Remove. * arch-utils.h (default_remote_breakpoint_from_pc): Remove. * arm-tdep.c (arm_remote_breakpoint_from_pc): Remove. (arm_gdbarch_init): Don't call set_gdbarch_remote_breakpoint_from_pc. * gdbarch.sh (remote_breakpoint_from_pc): Remove. * gdbarch.c, gdbarch.h: Regenerate. * mips-tdep.c (mips_remote_breakpoint_from_pc): Remove. (mips_gdbarch_init): Don't call set_gdbarch_remote_breakpoint_from_pc.	2016-11-03 14:35:14 +00:00
Yao Qi	cd6c3b4ffc	New gdbarch methods breakpoint_kind_from_pc and sw_breakpoint_from_kind ... This patch adds two gdbarch methods breakpoint_kind_from_pc and sw_breakpoint_from_kind, and uses target_info.placed_size as "kind" of the breakpoint. This patch updates the usages of target_info.placed_size. The "kind" of a breakpoint is determined by gdbarch rather than target, so we have gdbarch method breakpoint_kind_from_pc, and we should set target_info.placed_size out of each implementation of target to_insert_breakpoint. In this way, each target doesn't have to set target_info.placed_size any more. This patch also sets target_info.placed_address before target_insert_breakpoint too, so that target to_insert_breakpoint can use it, see record_full_insert_breakpoint. Before we call target_insert_breakpoint, we set target_info.placed_address and target_info.placed_size like this, CORE_ADDR addr = bl->target_info.reqstd_address; bl->target_info.placed_size = gdbarch_breakpoint_kind_from_pc (bl->gdbarch, &addr); bl->target_info.placed_address = addr; return target_insert_breakpoint (bl->gdbarch, &bl->target_info); target_insert_breakpoint may fail, but it doesn't matter to the "kind" and "placed_address" of a breakpoint. They should be determined by gdbarch. gdb: 2016-11-03 Yao Qi <yao.qi@linaro.org> * arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Define breakpoint_kind_from_pc and sw_breakpoint_from_kind. (GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): Likewise. (SET_GDBARCH_BREAKPOINT_MANIPULATION): Call set_gdbarch_breakpoint_kind_from_pc and set_gdbarch_sw_breakpoint_from_kind. * arm-tdep.c: Add comments. * bfin-tdep.c: Likewise. * breakpoint.c (breakpoint_kind): New function. (insert_bp_location): Set target_info.placed_size and target_info.placed_address. (bkpt_insert_location): Likewise. * cris-tdep.c: Add comments. * gdbarch.sh (breakpoint_kind_from_pc): New. (sw_breakpoint_from_kind): New. * gdbarch.c, gdbarch.h: Regenerated. * ia64-tdep.c (ia64_memory_insert_breakpoint): Don't set bp_tgt->placed_size. (ia64_memory_remove_breakpoint): Don't assert bp_tgt->placed_size. (ia64_breakpoint_kind_from_pc): New function. (ia64_gdbarch_init): Install ia64_breakpoint_kind_from_pc. * m32r-tdep.c (m32r_memory_insert_breakpoint): Don't set bp_tgt->placed_size. * mem-break.c (default_memory_insert_breakpoint): Don't set bp_tgt->placed_size. Call gdbarch_sw_breakpoint_from_kind. (default_memory_remove_breakpoint): Call gdbarch_sw_breakpoint_from_kind. (memory_validate_breakpoint): Don't check bp_tgt->placed_size. * mips-tdep.c: Add comments. * mt-tdep.c: Likewise. * nios2-tdep.c: Likewise. * record-full.c (record_full_insert_breakpoint): Don't call gdbarch_breakpoint_from_pc. Don't set bp_tgt->placed_address and bp_tgt->placed_size. * remote.c (remote_insert_breakpoint): Don't call gdbarch_remote_breakpoint_from_pc. Use bp_tgt->placed_size. Don't set bp_tgt->placed_address and bp_tgt->placed_size. (remote_insert_hw_breakpoint): Likewise. * score-tdep.c: Likewise. * sh-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * v850-tdep.c: Likewise. * xtensa-tdep.c: Likewise.	2016-11-03 14:35:13 +00:00
Ulrich Weigand	9b790ce722	Add gdbarch callback to provide formats for debug info float types ... At this point, all TYPE_CODE_FLT types carry their floating-point format, except for those creating from reading DWARF or stabs debug info. Those will be addressed by this commit. The main issue here is that we actually have to determine which floating- point format to use. Currently, we only have the type length as input to this decision. In the future, we may hopefully get --at least in DWARF-- additional information to help disambiguate multiple different formats of the same length. For now, we can still look at the type name as a hint. This decision logic is encapsulated in a gdbarch callback to allow platform-specific overrides. The default implementation use the same logic (compare type length against the various gdbarch_..._bit sizes) that is currently implemented in floatformat_from_length. With this commit, all platforms still use the default logic, so there should be no actual change in behavior. A follow-on commit will add support for __float128 on Intel and Power. Once dwarf2read.c and stabsread.c make use of the new callback to determine floating-point formats, we're now sure every TYPE_CODE_FLT type will always carry its format. The commit therefore adds asserts to verify_floatformat to ensure new code will continue to always provide formats, and removes the code in floatformat_from_type that used to handle types with a NULL TYPE_FLOATFORMAT. gdb/ChangeLog: * gdbarch.sh (floatformat_for_type): New gdbarch callback. * gdbarch.h, gdbarch.c: Re-generate. * arch-utils.h (default_floatformat_for_type): New prototype. * arch-utils.c (default_floatformat_for_type): New function. * doublest.c (floatformat_from_length): Remove. (floatformat_from_type): Assume TYPE_FLOATFORMAT is non-NULL. * gdbtypes.c (verify_floatformat): Require non-NULL format. * dwarf2read.c (dwarf2_init_float_type): New function. (read_base_type): Use it. * stabsread.c (dbx_init_float_type): New function. (read_sun_floating_type): Use it. (read_range_type): Likewise. Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>	2016-09-06 17:31:53 +02:00
John Baldwin	2faa34476d	Add a new gdbarch method to print a single AUXV entry. ... Different platforms have different meanings for auxiliary vector entries. The 'print_auxv_entry' gdbarch method allows an architecture to output a suitable description for platform-specific entries. A fprint_auxv_entry function is split out of fprint_target_auxv. This function outputs the description of a single auxiliary vector entry to the specified file using caller-supplied formatting and strings to describe the vector type. The existing switch on auxiliary vector types is moved out of fprint_target_auxv into a new default_print_auxv_entry function. default_print_auxv_entry chooses an appropriate format and description and calls fprint_single_auxv to describe a single vector entry. This function is used as the default 'print_auxv_entry' gdbarch method. fprint_target_auxv now invokes the gdbarch 'print_auxv_entry' method on each vector entry. gdb/ChangeLog: * auxv.c (fprint_auxv_entry): New function. (default_print_auxv_entry): New function. (fprint_target_auxv): Use gdbarch_print_auxv_entry. * auxv.h (enum auxv_format): New enum. (fprint_auxv_entry): Declare. (default_print_auxv_entry): Declare. * gdbarch.sh (print_auxv_entry): New. * gdbarch.c, gdbarch.h: Re-generated.	2016-06-24 10:34:29 -07:00
Yao Qi	7eb895307f	Skip unwritable frames in command "finish" ... Nowadays, GDB can't insert breakpoint on the return address of the exception handler on ARM M-profile, because the address is a magic one 0xfffffff9, (gdb) bt #0 CT32B1_IRQHandler () at ../src/timer.c:67 #1 <signal handler called> #2 main () at ../src/timer.c:127 (gdb) info frame Stack level 0, frame at 0x200ffa8: pc = 0x4ec in CT32B1_IRQHandler (../src/timer.c:67); saved pc = 0xfffffff9 called by frame at 0x200ffc8 source language c. Arglist at 0x200ffa0, args: Locals at 0x200ffa0, Previous frame's sp is 0x200ffa8 Saved registers: r7 at 0x200ffa0, lr at 0x200ffa4 (gdb) x/x 0xfffffff9 0xfffffff9: Cannot access memory at address 0xfffffff9 (gdb) finish Run till exit from #0 CT32B1_IRQHandler () at ../src/timer.c:67 Ed:15: Target error from Set break/watch: Et:96: Pseudo-address (0xFFFFFFxx) for EXC_RETURN is invalid (GDB error?) Warning: Cannot insert hardware breakpoint 0. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. Command aborted. even some debug probe can't set hardware breakpoint on the magic address too, (gdb) hbreak *0xfffffff9 Hardware assisted breakpoint 2 at 0xfffffff9 (gdb) c Continuing. Ed:15: Target error from Set break/watch: Et:96: Pseudo-address (0xFFFFFFxx) for EXC_RETURN is invalid (GDB error?) Warning: Cannot insert hardware breakpoint 2. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. Command aborted. The problem described above is quite similar to PR 8841, in which GDB can't set breakpoint on signal trampoline, which is mapped to a read-only page by kernel. The rationale of this patch is to skip "unwritable" frames when looking for caller frames in command "finish", and a new gdbarch method code_of_frame_writable is added. This patch fixes the problem on ARM cortex-m target, but it can be used to fix PR 8841 too. gdb: 2016-05-10 Yao Qi <yao.qi@arm.com> * arch-utils.c (default_code_of_frame_writable): New function. * arch-utils.h (default_code_of_frame_writable): Declare. * arm-tdep.c (arm_code_of_frame_writable): New function. (arm_gdbarch_init): Install gdbarch method code_of_frame_writable if the target is M-profile. * frame.c (skip_unwritable_frames): New function. * frame.h (skip_unwritable_frames): Declare. * gdbarch.sh (code_of_frame_writable): New. * gdbarch.c, gdbarch.h: Re-generated. * infcmd.c (finish_command): Call skip_unwritable_frames.	2016-05-23 17:32:56 +01:00
Yao Qi	21edc42f4e	Force to insert software single step breakpoint ... GDB doesn't insert software single step breakpoint if the instruction branches to itself, so that the program can't stop after command "si". (gdb) b 32 Breakpoint 2 at 0x8680: file git/gdb/testsuite/gdb.base/branch-to-self.c, line 32. (gdb) c Continuing. Breakpoint 2, main () at gdb/git/gdb/testsuite/gdb.base/branch-to-self.c:32 32 asm (".Lhere: " BRANCH_INSN " .Lhere"); /* loop-line */ (gdb) si infrun: clear_proceed_status_thread (Thread 3991.3991) infrun: proceed (addr=0xffffffff, signal=GDB_SIGNAL_DEFAULT) infrun: step-over queue now empty infrun: resuming [Thread 3991.3991] for step-over infrun: skipping breakpoint: stepping past insn at: 0x8680 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Sending packet: $Z0,8678,4#f3...Packet received: OK infrun: skipping breakpoint: stepping past insn at: 0x8680 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Sending packet: $Z0,b6fe86c8,4#82...Packet received: OK infrun: resume (step=1, signal=GDB_SIGNAL_0), trap_expected=1, current thread [Thread 3991.3991] at 0x868 breakpoint.c:should_be_inserted thinks the breakpoint shouldn't be inserted, which is wrong. This patch restrict the condition that only skip the non-single-step breakpoints if they are inserted at the place we are stepping over, however we don't want to skip single-step breakpoint if its thread is the thread we are stepping over, so in this patch, I add a thread num in 'struct step_over_info' to record the thread we're stepping over. gdb: 2016-04-25 Yao Qi <yao.qi@linaro.org> * breakpoint.c (should_be_inserted): Return 0 if the location's owner is not single step breakpoint or single step breakpoint's thread isn't the thread which is stepping past a breakpoint. * gdbarch.sh (software_single_step): Update comments. * gdbarch.h: Regenerated. * infrun.c (struct step_over_info) <thread>: New field. (set_step_over_info): New argument 'thread'. Callers updated. (clear_step_over_info): Set field thread to -1. (thread_is_stepping_over_breakpoint): New function. * infrun.h (thread_is_stepping_over_breakpoint): Declaration.	2016-04-25 09:16:21 +01:00
Yao Qi	cc651c1cdd	Remove comments on software_single_step in gdbarch.sh ... This comment is out of date. We've already done that. Patch is to remove it. gdb: 2016-03-23 Yao Qi <yao.qi@linaro.org> * gdbarch.sh (software_single_step): Remove comments. * gdbarch.h: Regenerated.	2016-03-23 11:21:20 +00:00
Walfred Tedeschi	012b3a217a	Intel MPX bound violation handling ... With Intel Memory Protection Extensions it was introduced the concept of boundary violation. A boundary violations is presented to the inferior as a segmentation fault having SIGCODE 3. This patch adds a handler for a boundary violation extending the information displayed when a bound violation is presented to the inferior. In the stop mode case the debugger will also display the kind of violation: "upper" or "lower", bounds and the address accessed. On no stop mode the information will still remain unchanged. Additional information about bound violations are not meaningful in that case user does not know the line in which violation occurred as well. When the segmentation fault handler is stop mode the out puts will be changed as exemplified below. The usual output of a segfault is: Program received signal SIGSEGV, Segmentation fault 0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050, c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68 68 value = *(p + len); In case it is a bound violation it will be presented as: Program received signal SIGSEGV, Segmentation fault Upper bound violation while accessing address 0x7fffffffc3b3 Bounds: [lower = 0x7fffffffc390, upper = 0x7fffffffc3a3] 0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050, c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68 68 value = *(p + len); In mi mode the output of a segfault is: *stopped,reason="signal-received",signal-name="SIGSEGV", signal-meaning="Segmentation fault", frame={addr="0x0000000000400d7c", func="upper",args=[{name="p", value="0x603010"},{name="a",value="0x603030"} ,{name="b",value="0x603050"}, {name="c",value="0x603070"}, {name="d",value="0x603090"},{name="len",value="7"}], file="i386-mpx-sigsegv.c",fullname="i386-mpx-sigsegv.c",line="68"}, thread-id="1",stopped-threads="all",core="6" in the case of a bound violation: *stopped,reason="signal-received",signal-name="SIGSEGV", signal-meaning="Segmentation fault", sigcode-meaning="Upper bound violation", lower-bound="0x603010",upper-bound="0x603023",bound-access="0x60302f", frame={addr="0x0000000000400d7c",func="upper",args=[{name="p", value="0x603010"},{name="a",value="0x603030"},{name="b",value="0x603050"}, {name="c",value="0x603070"},{name="d",value="0x603090"}, {name="len",value="7"}],file="i386-mpx-sigsegv.c", fullname="i386-mpx-sigsegv.c",line="68"},thread-id="1", stopped-threads="all",core="6" 2016-02-18 Walfred Tedeschi <walfred.tedeschi@intel.com> gdb/ChangeLog: * NEWS: Add entry for bound violation. * amd64-linux-tdep.c (amd64_linux_init_abi_common): Add handler for segmentation fault. * gdbarch.sh (handle_segmentation_fault): New. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New. (SIG_CODE_BONDARY_FAULT): New define. (i386_linux_init_abi): Use i386_mpx_bound_violation_handler. * i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New. * i386-tdep.c (i386_mpx_enabled): Add as external. * i386-tdep.c (i386_mpx_enabled): Add as external. * infrun.c (handle_segmentation_fault): New function. (print_signal_received_reason): Use handle_segmentation_fault. gdb/testsuite/ChangeLog: * gdb.arch/i386-mpx-sigsegv.c: New file. * gdb.arch/i386-mpx-sigsegv.exp: New file. * gdb.arch/i386-mpx-simple_segv.c: New file. * gdb.arch/i386-mpx-simple_segv.exp: New file. gdb/doc/ChangeLog: * gdb.texinfo (Signals): Add bound violation display hints for a SIGSEGV.	2016-02-18 17:25:49 +01:00
Marcin Kościelnicki	5f034a78b9	gdb: Add guess_tracepoint_registers hook to gdbarch. ... When we're looking at a tracefile trace frame where registers are not available, and the tracepoint has only one location, we supply the location's address as the PC register. However, this only works if PC is not a pseudo register, and individual architectures may want to guess more registers. Add a gdbarch hook that will handle that. gdb/ChangeLog: * arch-utils.c (default_guess_tracepoint_registers): New function. * arch-utils.h (default_guess_tracepoint_registers): New prototype. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh: Add guess_tracepoint_registers hook. * tracefile.c (tracefile_fetch_registers): Use the new gdbarch hook.	2016-02-18 17:21:22 +01:00
John Baldwin	4dfc5dbc4e	Add support for extracting thread names from cores. ... Add a new gdbarch method to extract a thread name from a core for a given thread. Use this new method in core_thread_name to implement the to_thread_name target op. gdb/ChangeLog: * corelow.c (core_thread_name): New function. (init_core_ops): Use "core_thread_name" for the "to_thread_name" target op. * gdbarch.sh (core_thread_name): New gdbarch callback. * gdbarch.h: Re-generate. * gdbarch.c: Re-generate.	2016-01-19 08:18:20 -08:00
Joel Brobecker	618f726fcb	GDB copyright headers update after running GDB's copyright.py script. ... gdb/ChangeLog: Update year range in copyright notice of all files.	2016-01-01 08:43:22 +04:00
Doug Evans	0fde2c536b	PR symtab/17391 gdb internal error: assertion fails in regcache.c:178 ... gdb/ChangeLog: * dwarf2-frame.c (dwarf2_restore_rule): Call dwarf_reg_to_regnum instead of gdbarch_dwarf2_reg_to_regnum. (dwarf2_frame_cache): Ditto. (read_addr_from_reg): Call dwarf_reg_to_regnum_or_error instead of gdbarch_dwarf2_reg_to_regnum. (get_reg_value): Ditto. (dwarf2_fetch_cfa_info): Ditto. (dwarf2_frame_prev_register): Ditto. * dwarf2loc.c: #include "complaints.h". (dwarf_expr_read_addr_from_reg): Call dwarf_reg_to_regnum_or_error instead of gdbarch_dwarf2_reg_to_regnum. (dwarf_expr_get_reg_value): Ditto. (read_pieced_value): Ditto. (write_pieced_value): Ditto. (dwarf2_evaluate_loc_desc_full): Ditto. (dwarf_reg_to_regnum): New function. (throw_bad_regnum_error): New function. (dwarf_reg_to_regnum_or_error): Renamed from dwarf2_reg_to_regnum_or_errorChange to take a ULONGEST regnum. All callers updated. Call throw_bad_regnum_error. (locexpr_regname): Improve text of bad register number. * dwarf2loc.h (dwarf_reg_to_regnum): Declare. (dwarf_reg_to_regnum_or_error): Update prototype. * dwarf2expr.c: #include "dwarf2loc.h". (dwarf_block_to_sp_offset): Call dwarf_reg_to_regnum instead of gdbarch_dwarf2_reg_to_regnum. * gdbarch.sh (dwarf2_reg_to_regnum): Add comment. * gdbarch.h: Regenerate. * amd64-tdep.c (amd64_dwarf_reg_to_regnum): Remove warning for bad register. * avr-tdep.c (avr_dwarf_reg_to_regnum): Ditto. * cris-tdep.c (cris_dwarf2_reg_to_regnum): Ditto. * bfin-tdep.c (bfin_reg_to_regnum): Fix error checking. * hppa-linux-tdep.c (hppa_dwarf_reg_to_regnum): Improve error checking. Remove warning for bad register. * hppa-tdep.c (hppa64_dwarf_reg_to_regnum): Ditto. * i386-tdep.c (i386_svr4_dwarf_reg_to_regnum): Renamed from i386_svr4_reg_to_regnum. Return -1 for bad registers. (i386_svr4_reg_to_regnum): New function. (i386_gdbarch_init): Update call to set_gdbarch_dwarf2_reg_to_regnum. * microblaze-tdep.c (microblaze_dwarf2_reg_to_regnum): Don't assert on bad registers, return -1. * msp430-tdep.c (msp430_dwarf2_reg_to_regnum): Improve error checking. Remove warning for bad register. * nios2-tdep.c: Add static assert for NIOS2_NUM_REGS. (nios2_dwarf_reg_to_regnum): Fix off-by-one error. Remove warning for bad register. Return -1 for bad register. * rl78-tdep.c (rl78_dwarf_reg_to_regnum): Don't flag an internal error for bad register, return -1. * rx-tdep.c (rx_dwarf_reg_to_regnum): Ditto. * m68k-tdep.c (m68k_dwarf_reg_to_regnum): Fix error result. * mep-tdep.c (mep_debug_reg_to_regnum): Ditto. * mips-tdep.c (mips_stab_reg_to_regnum): Ditto. (mips_dwarf_dwarf2_ecoff_reg_to_regnum): Ditto. * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Remove warning for bad regs. * xtensa-tdep.c (xtensa_reg_to_regnum): Remove internal error for bad regs. Fix error result. * stabsread.c (stab_reg_to_regnum): Watch for negative regno. (reg_value_complaint): Update complaint text. * mdebugread.c (reg_value_complaint): New function. (mdebug_reg_to_regnum): Rewrite to watch for bad reg numbers. gdb/testsuite/ChangeLog: * lib/dwarf.exp (_location): Add support for DW_OP_regx. * gdb.dwarf2/bad-regnum.c: New file. * gdb.dwarf2/bad-regnum.exp: New file.	2015-10-26 16:05:21 -07:00
Aleksandar Ristovski	89fdc87fdb	Remove core_regset_section ... gdb/ChangeLog: * gdbarch.sh (core_regset_section): Remove. * gdbarch.h: Regenerate.	2015-10-15 08:56:23 -04:00
Simon Marchi	ede5f15146	gdbarch.h: Change gdbarch_info::tdep_info's type to void * ... As reported by Ulrich here: https://sourceware.org/ml/gdb-patches/2015-09/msg00604.html The system compiler (gcc 4.1) in Centos 5 doesn't like that we cast to a pointer to a type that doesn't exist. I see no real value in using this kind iof construct over just using void *. So this patch changes the tdep_info field to void * and removes the casts. Even in C++, we should not need an explicit cast when assigning to a void *. gdb/ChangeLog: * gdbarch.sh (struct gdbarch_info): Change tdep_info's type to void *. * gdbarch.h: Regenerate. * i386-tdep.c (i386_gdbarch_init): Remove cast to struct gdbarch_tdep_info *. * mips-tdep.c (mips_gdbarch_init): Likewise. * ppc-linux-tdep (ppu2spu_sniffer): Likewise. * rs6000-tdep.c (rs6000_gdbarch_init): Likewise. * spu-multiarch.c (spu_gdbarch): Likewise.	2015-09-30 11:21:52 -04:00
Patrick Palka	6c214e7cb3	Use gdbarch obstack to allocate the TYPE_NAME string in arch_type ... Since the type whose name is being set is now being allocated on the gdbarch obstack, we should allocate its TYPE_NAME on the obstack too. This reduces the number of individual valgrind warnings for the command "gdb gdb" from ~300 to ~150. Tested on x86_64-unknown-linux-gnu. gdb/ChangeLog: * gdb_obstack.h (obstack_strdup): Declare. * gdb_obstack.c (obstack_strdup): Define. * gdbarch.sh (gdbarch_obstack_strdup): Declare and define. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbtypes.c (arch_type): Use gdbarch_obstack_strdup.	2015-09-02 20:53:33 -04:00
Patrick Palka	2fee770894	Revert "Use gdbarch obstack to allocate the TYPE_NAME string in arch_type" ... This patch manually modified the autogenerated files gdbarch.[ch] instead of going through gdbarch.sh. This reverts commit aa78b3b28a.	2015-08-29 18:24:29 -04:00
Patrick Palka	aa78b3b28a	Use gdbarch obstack to allocate the TYPE_NAME string in arch_type ... Since the type whose name is being set is now being allocated on the gdbarch obstack, we should allocate its TYPE_NAME on the obstack too. This reduces the number of individual valgrind warnings for the command "gdb gdb" from ~300 to ~150. Tested on x86_64-unknown-linux-gnu. gdb/ChangeLog: * gdbarch.h (gdbarch_obstack_strdup): Declare. * gdbarch.c (gdbarch_obstack_strdup): Define. * gdbtypes.c (arch_type): Use it.	2015-08-29 08:53:08 -04:00
Simon Marchi	8d7493201c	Replace some xmalloc-family functions with XNEW-family ones ... This patch is part of the make-gdb-buildable-in-C++ effort. The idea is to change some calls to the xmalloc family of functions to calls to the equivalents in the XNEW family. This avoids adding an explicit cast, so it keeps the code a bit more readable. Some of them also map relatively well to a C++ equivalent (XNEW (struct foo) -> new foo), so it will be possible to do scripted replacements if needed. I only changed calls that were obviously allocating memory for one or multiple "objects". Allocation of variable sizes (such as strings or buffer handling) will be for later (and won't use XNEW). - xmalloc (sizeof (struct foo)) -> XNEW (struct foo) - xmalloc (num * sizeof (struct foo)) -> XNEWVEC (struct foo, num) - xcalloc (1, sizeof (struct foo)) -> XCNEW (struct foo) - xcalloc (num, sizeof (struct foo)) -> XCNEWVEC (struct foo, num) - xrealloc (p, num * sizeof (struct foo) -> XRESIZEVEC (struct foo, p, num) - obstack_alloc (ob, sizeof (struct foo)) -> XOBNEW (ob, struct foo) - obstack_alloc (ob, num * sizeof (struct foo)) -> XOBNEWVEC (ob, struct foo, num) - alloca (sizeof (struct foo)) -> XALLOCA (struct foo) - alloca (num * sizeof (struct foo)) -> XALLOCAVEC (struct foo, num) Some instances of xmalloc followed by memset to zero the buffer were replaced by XCNEW or XCNEWVEC. I regtested on x86-64, Ubuntu 14.04, but the patch touches many architecture-specific files. For those I'll have to rely on the buildbot or people complaining that I broke their gdb. gdb/ChangeLog: * aarch64-linux-nat.c (aarch64_add_process): Likewise. * aarch64-tdep.c (aarch64_gdbarch_init): Likewise. * ada-exp.y (write_ambiguous_var): Likewise. * ada-lang.c (resolve_subexp): Likewise. (user_select_syms): Likewise. (assign_aggregate): Likewise. (ada_evaluate_subexp): Likewise. (cache_symbol): Likewise. * addrmap.c (allocate_key): Likewise. (addrmap_create_mutable): Likewise. * aix-thread.c (sync_threadlists): Likewise. * alpha-tdep.c (alpha_push_dummy_call): Likewise. (alpha_gdbarch_init): Likewise. * amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise. * arm-linux-nat.c (arm_linux_add_process): Likewise. * arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise. * arm-tdep.c (push_stack_item): Likewise. (arm_displaced_step_copy_insn): Likewise. (arm_gdbarch_init): Likewise. (_initialize_arm_tdep): Likewise. * avr-tdep.c (push_stack_item): Likewise. * ax-general.c (new_agent_expr): Likewise. * block.c (block_initialize_namespace): Likewise. * breakpoint.c (alloc_counted_command_line): Likewise. (update_dprintf_command_list): Likewise. (parse_breakpoint_sals): Likewise. (decode_static_tracepoint_spec): Likewise. (until_break_command): Likewise. (clear_command): Likewise. (update_global_location_list): Likewise. (get_breakpoint_objfile_data) Likewise. * btrace.c (ftrace_new_function): Likewise. (btrace_set_insn_history): Likewise. (btrace_set_call_history): Likewise. * buildsym.c (add_symbol_to_list): Likewise. (record_pending_block): Likewise. (start_subfile): Likewise. (start_buildsym_compunit): Likewise. (push_subfile): Likewise. (end_symtab_get_static_block): Likewise. (buildsym_init): Likewise. * cli/cli-cmds.c (source_command): Likewise. * cli/cli-decode.c (add_cmd): Likewise. * cli/cli-script.c (build_command_line): Likewise. (setup_user_args): Likewise. (realloc_body_list): Likewise. (process_next_line): Likewise. (copy_command_lines): Likewise. * cli/cli-setshow.c (do_set_command): Likewise. * coff-pe-read.c (read_pe_exported_syms): Likewise. * coffread.c (coff_locate_sections): Likewise. (coff_symtab_read): Likewise. (coff_read_struct_type): Likewise. * common/cleanups.c (make_my_cleanup2): Likewise. * common/common-exceptions.c (throw_it): Likewise. * common/filestuff.c (make_cleanup_close): Likewise. * common/format.c (parse_format_string): Likewise. * common/queue.h (DEFINE_QUEUE_P): Likewise. * compile/compile-object-load.c (munmap_list_add): Likewise. (compile_object_load): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * compile/compile.c (append_args): Likewise. * corefile.c (specify_exec_file_hook): Likewise. * cp-support.c (make_symbol_overload_list): Likewise. * cris-tdep.c (push_stack_item): Likewise. (cris_gdbarch_init): Likewise. * ctf.c (ctf_trace_file_writer_new): Likewise. * dbxread.c (init_header_files): Likewise. (add_new_header_file): Likewise. (init_bincl_list): Likewise. (dbx_end_psymtab): Likewise. (start_psymtab): Likewise. (dbx_end_psymtab): Likewise. * dcache.c (dcache_init): Likewise. * dictionary.c (dict_create_hashed): Likewise. (dict_create_hashed_expandable): Likewise. (dict_create_linear): Likewise. (dict_create_linear_expandable): Likewise. * dtrace-probe.c (dtrace_process_dof_probe): Likewise. * dummy-frame.c (register_dummy_frame_dtor): Likewise. * dwarf2-frame-tailcall.c (cache_new_ref1): Likewise. * dwarf2-frame.c (dwarf2_build_frame_info): Likewise. (decode_frame_entry_1): Likewise. * dwarf2expr.c (new_dwarf_expr_context): Likewise. * dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise. * dwarf2read.c (dwarf2_has_info): Likewise. (create_signatured_type_table_from_index): Likewise. (dwarf2_read_index): Likewise. (dw2_get_file_names_reader): Likewise. (create_all_type_units): Likewise. (read_cutu_die_from_dwo): Likewise. (init_tu_and_read_dwo_dies): Likewise. (init_cutu_and_read_dies): Likewise. (create_all_comp_units): Likewise. (queue_comp_unit): Likewise. (inherit_abstract_dies): Likewise. (read_call_site_scope): Likewise. (dwarf2_add_field): Likewise. (dwarf2_add_typedef): Likewise. (dwarf2_add_member_fn): Likewise. (attr_to_dynamic_prop): Likewise. (abbrev_table_alloc_abbrev): Likewise. (abbrev_table_read_table): Likewise. (add_include_dir): Likewise. (add_file_name): Likewise. (dwarf_decode_line_header): Likewise. (dwarf2_const_value_attr): Likewise. (dwarf_alloc_block): Likewise. (parse_macro_definition): Likewise. (set_die_type): Likewise. (write_psymtabs_to_index): Likewise. (create_cus_from_index): Likewise. (dwarf2_create_include_psymtab): Likewise. (process_psymtab_comp_unit_reader): Likewise. (build_type_psymtab_dependencies): Likewise. (read_comp_units_from_section): Likewise. (compute_compunit_symtab_includes): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (read_func_scope): Likewise. (process_structure_scope): Likewise. (mark_common_block_symbol_computed): Likewise. (load_partial_dies): Likewise. (dwarf2_symbol_mark_computed): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_read_minimal_symbols): Likewise. * environ.c (make_environ): Likewise. * eval.c (evaluate_subexp_standard): Likewise. * event-loop.c (create_file_handler): Likewise. (create_async_signal_handler): Likewise. (create_async_event_handler): Likewise. (create_timer): Likewise. * exec.c (build_section_table): Likewise. * fbsd-nat.c (fbsd_remember_child): Likewise. * fork-child.c (fork_inferior): Likewise. * frv-tdep.c (new_variant): Likewise. * gdbarch.sh (gdbarch_alloc): Likewise. (append_name): Likewise. * gdbtypes.c (rank_function): Likewise. (copy_type_recursive): Likewise. (add_dyn_prop): Likewise. * gnu-nat.c (make_proc): Likewise. (make_inf): Likewise. (gnu_write_inferior): Likewise. * gnu-v3-abi.c (build_gdb_vtable_type): Likewise. (build_std_type_info_type): Likewise. * guile/scm-param.c (compute_enum_list): Likewise. * guile/scm-utils.c (gdbscm_parse_function_args): Likewise. * guile/scm-value.c (gdbscm_value_call): Likewise. * h8300-tdep.c (h8300_gdbarch_init): Likewise. * hppa-tdep.c (hppa_init_objfile_priv_data): Likewise. (read_unwind_info): Likewise. * ia64-tdep.c (ia64_gdbarch_init): Likewise. * infcall.c (dummy_frame_context_saver_setup): Likewise. (call_function_by_hand_dummy): Likewise. * infcmd.c (step_once): Likewise. (finish_forward): Likewise. (attach_command): Likewise. (notice_new_inferior): Likewise. * inferior.c (add_inferior_silent): Likewise. * infrun.c (add_displaced_stepping_state): Likewise. (save_infcall_control_state): Likewise. (save_inferior_ptid): Likewise. (_initialize_infrun): Likewise. * jit.c (bfd_open_from_target_memory): Likewise. (jit_gdbarch_data_init): Likewise. * language.c (add_language): Likewise. * linespec.c (decode_line_2): Likewise. * linux-nat.c (add_to_pid_list): Likewise. (add_initial_lwp): Likewise. * linux-thread-db.c (add_thread_db_info): Likewise. (record_thread): Likewise. (info_auto_load_libthread_db): Likewise. * m32c-tdep.c (m32c_gdbarch_init): Likewise. * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise. * m68k-tdep.c (m68k_gdbarch_init): Likewise. * m88k-tdep.c (m88k_analyze_prologue): Likewise. * macrocmd.c (macro_define_command): Likewise. * macroexp.c (gather_arguments): Likewise. * macroscope.c (sal_macro_scope): Likewise. * macrotab.c (new_macro_table): Likewise. * mdebugread.c (push_parse_stack): Likewise. (parse_partial_symbols): Likewise. (parse_symbol): Likewise. (psymtab_to_symtab_1): Likewise. (new_block): Likewise. (new_psymtab): Likewise. (mdebug_build_psymtabs): Likewise. (add_pending): Likewise. (elfmdebug_build_psymtabs): Likewise. * mep-tdep.c (mep_gdbarch_init): Likewise. * mi/mi-main.c (mi_execute_command): Likewise. * mi/mi-parse.c (mi_parse_argv): Likewise. * minidebug.c (lzma_open): Likewise. * minsyms.c (terminate_minimal_symbol_table): Likewise. * mips-linux-nat.c (mips_linux_insert_watchpoint): Likewise. * mips-tdep.c (mips_gdbarch_init): Likewise. * mn10300-tdep.c (mn10300_gdbarch_init): Likewise. * msp430-tdep.c (msp430_gdbarch_init): Likewise. * mt-tdep.c (mt_registers_info): Likewise. * nat/aarch64-linux.c (aarch64_linux_new_thread): Likewise. * nat/linux-btrace.c (linux_enable_bts): Likewise. (linux_enable_pt): Likewise. * nat/linux-osdata.c (linux_xfer_osdata_processes): Likewise. (linux_xfer_osdata_processgroups): Likewise. * nios2-tdep.c (nios2_gdbarch_init): Likewise. * nto-procfs.c (procfs_meminfo): Likewise. * objc-lang.c (start_msglist): Likewise. (selectors_info): Likewise. (classes_info): Likewise. (find_methods): Likewise. * objfiles.c (allocate_objfile): Likewise. (update_section_map): Likewise. * osabi.c (gdbarch_register_osabi): Likewise. (gdbarch_register_osabi_sniffer): Likewise. * parse.c (start_arglist): Likewise. * ppc-linux-nat.c (hwdebug_find_thread_points_by_tid): Likewise. (hwdebug_insert_point): Likewise. * printcmd.c (display_command): Likewise. (ui_printf): Likewise. * procfs.c (create_procinfo): Likewise. (load_syscalls): Likewise. (proc_get_LDT_entry): Likewise. (proc_update_threads): Likewise. * prologue-value.c (make_pv_area): Likewise. (pv_area_store): Likewise. * psymtab.c (extend_psymbol_list): Likewise. (init_psymbol_list): Likewise. (allocate_psymtab): Likewise. * python/py-inferior.c (add_thread_object): Likewise. * python/py-param.c (compute_enum_values): Likewise. * python/py-value.c (valpy_call): Likewise. * python/py-varobj.c (py_varobj_iter_next): Likewise. * python/python.c (ensure_python_env): Likewise. * record-btrace.c (record_btrace_start_replaying): Likewise. * record-full.c (record_full_reg_alloc): Likewise. (record_full_mem_alloc): Likewise. (record_full_end_alloc): Likewise. (record_full_core_xfer_partial): Likewise. * regcache.c (get_thread_arch_aspace_regcache): Likewise. * remote-fileio.c (remote_fileio_init_fd_map): Likewise. * remote-notif.c (remote_notif_state_allocate): Likewise. * remote.c (demand_private_info): Likewise. (remote_notif_stop_alloc_reply): Likewise. (remote_enable_btrace): Likewise. * reverse.c (save_bookmark_command): Likewise. * rl78-tdep.c (rl78_gdbarch_init): Likewise. * rx-tdep.c (rx_gdbarch_init): Likewise. * s390-linux-nat.c (s390_insert_watchpoint): Likewise. * ser-go32.c (dos_get_tty_state): Likewise. (dos_copy_tty_state): Likewise. * ser-mingw.c (ser_windows_open): Likewise. (ser_console_wait_handle): Likewise. (ser_console_get_tty_state): Likewise. (make_pipe_state): Likewise. (net_windows_open): Likewise. * ser-unix.c (hardwire_get_tty_state): Likewise. (hardwire_copy_tty_state): Likewise. * solib-aix.c (solib_aix_new_lm_info): Likewise. * solib-dsbt.c (dsbt_current_sos): Likewise. (dsbt_relocate_main_executable): Likewise. * solib-frv.c (frv_current_sos): Likewise. (frv_relocate_main_executable): Likewise. * solib-spu.c (spu_bfd_fopen): Likewise. * solib-svr4.c (lm_info_read): Likewise. (svr4_copy_library_list): Likewise. (svr4_default_sos): Likewise. * source.c (find_source_lines): Likewise. (line_info): Likewise. (add_substitute_path_rule): Likewise. * spu-linux-nat.c (spu_bfd_open): Likewise. * spu-tdep.c (info_spu_dma_cmdlist): Likewise. * stabsread.c (dbx_lookup_type): Likewise. (read_type): Likewise. (read_member_functions): Likewise. (read_struct_fields): Likewise. (read_baseclasses): Likewise. (read_args): Likewise. (_initialize_stabsread): Likewise. * stack.c (func_command): Likewise. * stap-probe.c (handle_stap_probe): Likewise. * symfile.c (addrs_section_sort): Likewise. (addr_info_make_relative): Likewise. (load_section_callback): Likewise. (add_symbol_file_command): Likewise. (init_filename_language_table): Likewise. * symtab.c (create_filename_seen_cache): Likewise. (sort_search_symbols_remove_dups): Likewise. (search_symbols): Likewise. * target.c (make_cleanup_restore_target_terminal): Likewise. * thread.c (new_thread): Likewise. (enable_thread_stack_temporaries): Likewise. (make_cleanup_restore_current_thread): Likewise. (thread_apply_all_command): Likewise. * tic6x-tdep.c (tic6x_gdbarch_init): Likewise. * top.c (gdb_readline_wrapper): Likewise. * tracefile-tfile.c (tfile_trace_file_writer_new): Likewise. * tracepoint.c (trace_find_line_command): Likewise. (all_tracepoint_actions_and_cleanup): Likewise. (make_cleanup_restore_current_traceframe): Likewise. (get_uploaded_tp): Likewise. (get_uploaded_tsv): Likewise. * tui/tui-data.c (tui_alloc_generic_win_info): Likewise. (tui_alloc_win_info): Likewise. (tui_alloc_content): Likewise. (tui_add_content_elements): Likewise. * tui/tui-disasm.c (tui_find_disassembly_address): Likewise. (tui_set_disassem_content): Likewise. * ui-file.c (ui_file_new): Likewise. (stdio_file_new): Likewise. (tee_file_new): Likewise. * utils.c (make_cleanup_restore_integer): Likewise. (add_internal_problem_command): Likewise. * v850-tdep.c (v850_gdbarch_init): Likewise. * valops.c (find_oload_champ): Likewise. * value.c (allocate_value_lazy): Likewise. (record_latest_value): Likewise. (create_internalvar): Likewise. * varobj.c (install_variable): Likewise. (new_variable): Likewise. (new_root_variable): Likewise. (cppush): Likewise. (_initialize_varobj): Likewise. * windows-nat.c (windows_make_so): Likewise. * x86-nat.c (x86_add_process): Likewise. * xcoffread.c (arrange_linetable): Likewise. (allocate_include_entry): Likewise. (process_linenos): Likewise. (SYMBOL_DUP): Likewise. (xcoff_start_psymtab): Likewise. (xcoff_end_psymtab): Likewise. * xml-support.c (gdb_xml_parse_attr_ulongest): Likewise. * xtensa-tdep.c (xtensa_register_type): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. gdb/gdbserver/ChangeLog: * ax.c (gdb_parse_agent_expr): Likewise. (compile_bytecodes): Likewise. * dll.c (loaded_dll): Likewise. * event-loop.c (append_callback_event): Likewise. (create_file_handler): Likewise. (create_file_event): Likewise. * hostio.c (handle_open): Likewise. * inferiors.c (add_thread): Likewise. (add_process): Likewise. * linux-aarch64-low.c (aarch64_linux_new_process): Likewise. * linux-arm-low.c (arm_new_process): Likewise. (arm_new_thread): Likewise. * linux-low.c (add_to_pid_list): Likewise. (linux_add_process): Likewise. (handle_extended_wait): Likewise. (add_lwp): Likewise. (enqueue_one_deferred_signal): Likewise. (enqueue_pending_signal): Likewise. (linux_resume_one_lwp_throw): Likewise. (linux_resume_one_thread): Likewise. (linux_read_memory): Likewise. (linux_write_memory): Likewise. * linux-mips-low.c (mips_linux_new_process): Likewise. (mips_linux_new_thread): Likewise. (mips_add_watchpoint): Likewise. * linux-x86-low.c (initialize_low_arch): Likewise. * lynx-low.c (lynx_add_process): Likewise. * mem-break.c (set_raw_breakpoint_at): Likewise. (set_breakpoint): Likewise. (add_condition_to_breakpoint): Likewise. (add_commands_to_breakpoint): Likewise. (clone_agent_expr): Likewise. (clone_one_breakpoint): Likewise. * regcache.c (new_register_cache): Likewise. * remote-utils.c (look_up_one_symbol): Likewise. * server.c (queue_stop_reply): Likewise. (start_inferior): Likewise. (queue_stop_reply_callback): Likewise. (handle_target_event): Likewise. * spu-low.c (fetch_ppc_memory): Likewise. (store_ppc_memory): Likewise. * target.c (set_target_ops): Likewise. * thread-db.c (thread_db_load_search): Likewise. (try_thread_db_load_1): Likewise. * tracepoint.c (add_tracepoint): Likewise. (add_tracepoint_action): Likewise. (create_trace_state_variable): Likewise. (cmd_qtdpsrc): Likewise. (cmd_qtro): Likewise. (add_while_stepping_state): Likewise. * win32-low.c (child_add_thread): Likewise. (get_image_name): Likewise.	2015-08-26 17:18:12 -04:00
Pedro Alves	7f03bd92e3	PPC64: Fix gdb.arch/ppc64-atomic-inst.exp with displaced stepping ... The ppc64 displaced step code can't handle atomic sequences. Fallback to stepping over the breakpoint in-line if we detect one. gdb/ChangeLog: 2015-08-07 Pedro Alves <palves@redhat.com> * infrun.c (displaced_step_prepare_throw): Return -1 if gdbarch_displaced_step_copy_insn returns NULL. Update intro comment. * rs6000-tdep.c (LWARX_MASK, LWARX_INSTRUCTION, LDARX_INSTRUCTION) (STWCX_MASK, STWCX_INSTRUCTION, STDCX_INSTRUCTION): Move higher up in file. (ppc_displaced_step_copy_insn): New function. (ppc_displaced_step_fixup): Update comment. (rs6000_gdbarch_init): Install ppc_displaced_step_copy_insn as gdbarch_displaced_step_copy_insn hook. * gdbarch.sh (displaced_step_copy_insn): Document what happens on NULL return. * gdbarch.h: Regenerate. gdb/testsuite/ChangeLog: 2015-08-07 Pedro Alves <palves@redhat.com> * gdb.arch/ppc64-atomic-inst.exp (do_test): New procedure, move tests here. (top level): Run do_test with and without displaced stepping.	2015-08-07 17:26:21 +01:00