bfd/
* elfnn-riscv.c: Indent, labels and GNU coding standards tidy,
also aligned the code.
gas/
* config/tc-riscv.c: Indent and GNU coding standards tidy,
also aligned the code.
* config/tc-riscv.h: Likewise.
include/
* opcode/riscv.h: Indent and GNU coding standards tidy,
also aligned the code.
opcodes/
* riscv-opc.c (riscv_gpr_names_abi): Aligned the code.
(riscv_fpr_names_abi): Likewise.
(riscv_opcodes): Likewise.
(riscv_insn_types): Likewise.
Error and warning messages usually starting with lower case letter,
and without the period at the end. Besides, add the prefixed "internel:"
at the beginning of the messages when they are caused internally.
Also fix indents and typos.
bfd/
* elfnn-riscv.c (riscv_merge_attributes): Fix typos of messages.
gas/
* config/tc-riscv.c: Error and warning messages tidy.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Updated.
* testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-read-only-02.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
ld/
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-01.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-05.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-06.d: Likewise.
opcodes/
* riscv-dis.c (parse_riscv_dis_option): Fix typos of message.
The GNU coding standards said the comments should be complete sentences
and end with a period and two spaces. But sometimes it should be more
cleaner when the comments only include a word or codes. Therefore, I made
the following changes after referring to other target/generic codes,
* Try to write sentences in comments, must end with a period and two spaces.
* End with two spaces without a period for codes/instructions only.
* End with one space without a period for a single word/variable only.
Besids, also rewrite/remove some comments which are obsolete or too long,
and fix indents for comments.
bfd/
* elfnn-riscv.c: Comments tidy and improvement.
* elfxx-riscv.c: Likewise.
* elfxx-riscv.h: Likewise.
gas/
* config/tc-riscv.c: Comments tidy and improvement. Also update
comment "fallthru" to "Fall through" that end with a period and
two spaces.
include/
* elf/riscv.h: Comments tidy and improvement.
* opcode/riscv-opc.h: Likewise.
* opcode/riscv.h: Likewise.
opcodes/
* riscv-dis.c: Comments tidy and improvement.
* riscv-opc.c: Likewise.
POWER10 adds some return-oriented programming (ROP) instructions and
this patch adds support for them. You will notice that they are enabled
for POWER8 and later, not just POWER10 and later. This is on purpose.
This allows the instructions to be added to POWER8 binaries that can be
run on POWER8, POWER9 and POWER10 cpus. On POWER8 and POWER9, these
instructions just act as nop's.
opcodes/
* ppc-opc.c (insert_dw, (extract_dw): New functions.
(DW, (XRC_MASK): Define.
(powerpc_opcodes) <hashchk, hashchkp, hashst, haststp>: New mnemonics.
gas/
* testsuite/gas/ppc/rop-checks.d,
* testsuite/gas/ppc/rop-checks.l,
* testsuite/gas/ppc/rop-checks.s,
* testsuite/gas/ppc/rop.d,
* testsuite/gas/ppc/rop.s: New tests.
* testsuite/gas/ppc/ppc.exp: Run them.
commit f478212851 did the regen by hand, missed a change in
ld/configure and didn't update line numbers. Fix that, and an old
regen of ld/Makefile.in with the wrong automake.
bfd/
* configure: Regenerate.
binutils/
* configure: Regenerate.
gas/
* configure: Regenerate.
gprof/
* configure: Regenerate.
ld/
* Makefile.in: Regenerate.
* configure: Regenerate.
libctf/
* configure: Regenerate.
opcodes/
* configure: Regenerate.
zlib/
* configure: Regenerate.
PR 27129
* aarch64-dis.c (determine_disassembling_preference): Move call to
aarch64_match_operands_constraint outside of the assertion.
* aarch64-asm.c (aarch64_ins_limm_1): Remove call to assert.
Replace with a return of FALSE.
Add support for the pause hint instruction, as specified in the
Zihintpause extension. The pause instruction is encoded as a
special form of a memory fence (which is available as part of the
base instruction set). The chosen encoding does not mandate any
particular memory ordering and therefore is a true hint.
bfd/
* elfxx-riscv.c (riscv_std_z_ext_strtab): Added zihintpause.
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Added
INSN_CLASS_ZIHINTPAUSE.
* testsuite/gas/riscv/pause.d: New testcase. Adding coverage for
the pause hint instruction.
* testsuite/gas/riscv/pause.s: Likewise.
include/
* opcode/riscv-opc.h: Added MATCH_PAUSE, MASK_PAUSE and DECLARE_INSN
for pause hint instruction.
* opcode/riscv.h (enum riscv_insn_class): Added INSN_CLASS_ZIHINTPAUSE.
opcodes/
* riscv-opc.c (riscv_opcodes): Add pause hint instruction.
In fact rev8/orc.b/zext.h are the aliases of grevi/gorci/pack[w], so we
should update them to INSN_ALIAS when we have supported their true instruction
in the future. Though we still use the [MATCH|MAKS]_[GREVI|GORCI|PACK|PACKW]
to encode them. Besides, the orc.b has the same encoding both in rv32 and
rv64, so we just keep one of them in the opcode table.
This patch is implemented according to the following link,
https://github.com/riscv/riscv-bitmanip/pull/101
2021-01-07 Claire Xenia Wolf <claire@symbioticeda.com>
Jim Wilson <jimw@sifive.com>
Andrew Waterman <andrew@sifive.com>
Maxim Blinov <maxim.blinov@embecosm.com>
Kito Cheng <kito.cheng@sifive.com>
Nelson Chu <nelson.chu@sifive.com>
bfd/
* elfxx-riscv.c (riscv_std_z_ext_strtab): Added zba, zbb and zbc.
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Handle INSN_CLASS_ZB*.
(riscv_get_default_ext_version): Do not check the default_isa_spec when
the version defined in the riscv_opcodes table is ISA_SPEC_CLASS_DRAFT.
* testsuite/gas/riscv/bitmanip-insns-32.d: New testcase.
* testsuite/gas/riscv/bitmanip-insns-64.d: Likewise.
* testsuite/gas/riscv/bitmanip-insns.s: Likewise.
include/
* opcode/riscv-opc.h: Added MASK/MATCH/DECLARE_INSN for ZBA/ZBB/ZBC.
* opcode/riscv.h (riscv_insn_class): Added INSN_CLASS_ZB*.
(enum riscv_isa_spec_class): Added ISA_SPEC_CLASS_DRAFT for the
frozen extensions.
opcodes/
* riscv-opc.c (riscv_opcodes): Add ZBA/ZBB/ZBC instructions.
(MASK_RVB_IMM): Used for rev8 and orc.b encoding.
https://github.com/riscv/riscv-asm-manual/pull/61
We aleady have sext.w, so just add sext.b, sext.h, zext.b, zext.h
and zext.w. In a certain sense, zext.b is not a pseudo - It is an
alias of andi. Similarly, sext.b and sext.h are aliases of other
rvb instructions, when we enable b extension; But they are pseudos
when we just enable rvi. However, this patch does not consider the
rvb cases. Besides, zext.w is only valid in rv64.
gas/
* config/tc-riscv.c (riscv_ext): New function. Use md_assemblef
to expand the zext and sext pseudos, to give them a chance to be
expanded into c-ext instructions.
(macro): Handle M_ZEXTH, M_ZEXTW, M_SEXTB and M_SEXTH.
* testsuite/gas/riscv/ext.s: New testcase.
* testsuite/gas/riscv/ext-32.d: Likewise.
* testsuite/gas/riscv/ext-64.d: Likewise.
include/
* opcode/riscv.h (M_ZEXTH, M_ZEXTW, M_SEXTB, M_SEXTH.): Added.
opcodes/
* riscv-opc.c (riscv_opcodes): Add sext.[bh] and zext.[bhw].
opcodes/
* disassemble.h (riscv_get_disassembler): Declare.
* disassemble.c (disassembler): Changed to riscv_get_disassembler.
* riscv-dis.c (riscv_get_disassembler): Check the elf privileged spec
attributes before calling print_insn_riscv.
(parse_riscv_dis_option): Same as the assembler, the priority of elf
attributes are higher than the options. If we find the privileged
attributes, but the -Mpriv-spec= is different, then output error/warning
and still use the elf attributes set.
bfd/
* elfxx-riscv.c (riscv_ext_dont_care_version): New function. Return
TRUE if we don't care the versions of the extensions. These extensions
are added to the subset list for special purposes, with the explicit
versions or the RISCV_UNKNOWN_VERSION versions.
(riscv_parse_add_subset): If we do care the versions of the extension,
and the versions are unknown, then report errors for the non-implicit
extensions, and return directly for the implicit one.
(riscv_arch_str1): Do not output i extension after e, and the extensions
which versions are unknown.
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Handle INSN_CLASS_ZICSR
and INSN_CLASS_ZIFENCEI.
* testsuite/gas/riscv/march-imply-i.s: New testcase.
* testsuite/gas/riscv/march-imply-i2p0-01.d: New testcase. The version
of i is less than 2.1, and zi* are supported in the chosen spec, so
enable the fence.i and csr instructions, also output the implicit zi* to
the arch string.
* testsuite/gas/riscv/march-imply-i2p0-02.d: Likewise, but the zi* are
not supported in the spec 2.2. Enable the related instructions since
i's version is less than 2.1, but do not output them.
* testsuite/gas/riscv/march-imply-i2p1-01.d: New testcase. The version
of i is 2.1, so don't add it's implicit zi*, and disable the related
instructions.
* testsuite/gas/riscv/march-imply-i2p1-01.l: Likewise.
* testsuite/gas/riscv/march-imply-i2p1-02.d: Likewise, and set the zi*
explicitly, so enable the related instructions.
* testsuite/gas/riscv/march-imply-i2p0.d: Removed.
* testsuite/gas/riscv/march-imply-i2p1.d: Removed.
include/
* opcode/riscv.h: Add INSN_CLASS_ZICSR and INSN_CLASS_ZIFENCEI.
opcodes/
* riscv-opc.c (riscv_opcodes): Control fence.i and csr instructions by
zifencei and zicsr.
These two extended mnemonics are documented in the Principles of
Operations manual but currently not supported by Binutils. They
provide aliases for already supported instructions with the zero flag
being set. The flag otherwise is mingled into one of the immediate
operands what makes asm code much harder to read.
opcodes/
* s390-opc.txt: Add risbgz and risbgnz.
* s390-opc.c (U6_26): New operand type.
(INSTR_RIE_RRUUU2, MASK_RIE_RRUUU2): New instruction format and
mask.
gas/
* testsuite/gas/s390/zarch-z10.s: Add tests for risbgz.
* testsuite/gas/s390/zarch-z10.d: Add regexp for risbgz.
* testsuite/gas/s390/zarch-zEC12.s: Add tests for risbgnz.
* testsuite/gas/s390/zarch-zEC12.d: Add regexp for risbgnz.
Add extended mnemonics used in the HLASM assembler. All of them are
just aliases for instructions we already support and help when
assembling code which was written for the HLASM assembler.
The HLASM mnemonics are documented here:
https://www.ibm.com/support/knowledgecenter/SSENW6_1.6.0/com.ibm.hlasm.v1r6.asm/asmr1023.pdf
See the 'Branching with extended mnemonic codes' chapter.
objdump will still print the existing mnemonics with the exception of
relative nop branches (i.e. conditional branches with an empty
condition code mask). Now we have jnop and jgnop which will be used
by objdump when possible.
The same change have been applied to the LLVM assembler:
https://reviews.llvm.org/D92185
opcodes/
* s390-opc.txt: Add extended mnemonics.
gas/
* testsuite/gas/s390/esa-g5.s: Test new extended mnemonics.
* testsuite/gas/s390/esa-g5.d: Likewise.
* testsuite/gas/s390/esa-z900.s: Likewise.
* testsuite/gas/s390/esa-z900.d: Likewise.
* testsuite/gas/s390/zarch-z900.s: Likewise.
* testsuite/gas/s390/zarch-z900.d: Likewise.
ld/
* testsuite/ld-s390/tlsbin_64.dd: The newly added jgnop mnemonic
replaces long relative branches with empty condition code mask.
Although spec had defined and ratified p, v and n extensions,
but we don't have any related implementaitons so far, so keep
them in the supported extension table looks weird. Remove them
until we have the related implementations.
opcodes/
* riscv-opc.c (riscv_ext_version_table): Remove the p, v, n
and their versions.
The previous change
"x86: Ignore CS/DS/ES/SS segment-override prefixes in 64-bit mode"
to ignore segment override prefixes in 64-bit mode lead to dumping
branch hints as excessive prefixes:
ffffffff8109d5a0 <vmx_get_rflags>:
...
ffffffff8109d601: 3e 77 0a ds ja,pt ffffffff8109d60e <vmx_get_rflags+0x6e>
^^^^^
In this particular case, those prefixes are not excessive but are used
to provide branch hints - taken/not-taken - to the CPU.
Assign active_seg_prefix in that particular case to consume them.
gas/
2002-11-29 Borislav Petkov <bp@suse.de>
* testsuite/gas/i386/branch.d: Add new branch insns test.
* testsuite/gas/i386/branch.s: Likewise.
* testsuite/gas/i386/i386.exp: Insert the new branch test.
* testsuite/gas/i386/x86-64-branch.d: Test for branch hints insns.
* testsuite/gas/i386/x86-64-branch.s: Likewise.
* testsuite/gas/i386/ilp32/x86-64-branch.d: Likewise.
opcodes/
2020-11-28 Borislav Petkov <bp@suse.de>
* i386-dis.c (print_insn): Set active_seg_prefix for branch hint insns
to not dump branch hint prefixes 0x2E and 0x3E as unused prefixes.
Extract FLAGM (Condition flag manipulation) feature from Armv8.4-A.
Please note that FLAGM stays a Armv8.4-A feature but now can be
assigned to other architectures or CPUs.
New -march option +flagm is added to enable independently this
feature.
include * opcode/pru.h: Add LMBD (left-most bit detect) opcode index
opcodes * pru-opc.c: Add opcode description for LMBD (left-most bit detect)
gas * testsuite/gas/pru/misc.s: Add tests for lmbd (left-most bit detect)
* testsuite/gas/pru/misc.d: Add tests for lmbd (left-most bit
This patch:
+ Adds new ACCDATA_EL1 (Accelerator Data) system register, see [0].
+ Adds LS64 instruction tests.
+ Update LS64 feature test with new register.
+ Fix comment for AARCH64_OPND_Rt_LS64.
[0] https://developer.arm.com/docs/ddi0595/i/aarch64-system-registers/accdata_el1
Note: as this is register only extension we do not want to hide these
registers behind -march flag going forward (they should be enabled by
default).
Atomic 64-byte load/store instructions limit Rt register number to
values matching below condition (register <Xt> number must be even
and <= 22):
if Rt<4:3> == '11' || Rt<0> == '1' then UNDEFINED;
This patch adds check if Rt fulfills above requirement.
For more details regarding atomic 64-byte load/store instruction for
Armv8.7 please refer to Arm A64 Instruction set documentation for
Armv8-A architecture profile, see document page 157 for load
instruction, and pages 414-418 for store instructions of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
Extract PAC (Pointer Authentication) feature from Armv8.3-A.
Please note that PAC stays a Armv8.3-A feature but now can be
assigned to other architectures or CPUs.
This patch:
+ updates RAS feature system registers with new RAS 1.1 regs.
+ extends RAS/RAS 1.1 support for all architecture levels of Armv8-A.
Please note that early Armv8-A architectures do not officially support RAS
extension.
Rationale of the patch:
To ease development so that user-friendly RAS system registers operands can be
used. Certain use cases require developers to enable only more generic
architecture (e.g. -march=armv8-a) during system development. Users must use
RAS extension registers bearing in mind that system they use must support it.
The RAS (Reliability, Availability, Serviceability) extension is a
system-level extension that defines a number of system registers.
RAS 1.1 (FEAT_RASv1p1) introduces five new system registers:
ERXPFGCTL_EL1, ERXPFGCDN_EL1, ERXMISC2_EL1, ERXMISC3_EL1 and
ERXPFGF_EL1.
For details see [0].
[0] https://developer.arm.com/docs/ddi0595/i/
Armv8.7 architecture introduces the "accelerator extension", aka
load/store of 64 bytes. New atomic load/store instructions are: LD64B,
ST64B, ST64BV and ST64BV0.
This patch adds:
+ New feature +ls64 to -march command line.
+ New atomic load/store instructions associated with above feature.
For more details regarding atomic 64-byte load/store instruction for
Armv8.7 please refer to Arm A64 Instruction set documentation for
Armv8-A architecture profile, see document page 157 for load
instruction, and pages 414-418 for store instructions of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
This patch adds new to Armv8.7 WFIT instruction which take one operand:
WFIT <Xt>
Where:
<Xt> is 64-bit name of the general-purpose source register, encoded in the
"Rd" field.
For more details regarding WFIT (Wait For Interrupt with Timeout) instruction for
Armv8.7-a please refer to Arm A64 Instruction set documentation for Armv8-A
architecture profile, see document pages 570 of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
gas/ChangeLog:
2020-10-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update docs.
* testsuite/gas/aarch64/system-5.d: Update test with WFIT insn.
* testsuite/gas/aarch64/system-5.s: Update test with WFIT insn.
opcodes/ChangeLog:
2020-10-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-tbl.h (struct aarch64_opcode): New instruction WFIT.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds:
+ New feature +csre to -march command line.
+ New instruction CSR PDEC associated with CSRE feature.
Please note that CSRE system registers were already upstreamed. This patch
should finalize CSRE feature implementation.
CSRE feature adds CSR PDEC (Decrements Call stack pointer by the size of
a Call stack record) instruction. Although this instruction has operand
(PDEC) it's instruction's only operand. PDEC forces instruction field Rt
to be set to 0b1111. This results in fixed opcode of the instruction.
gas/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update docs.
* config/tc-aarch64.c (parse_csr_operand): New operand parser.
(parse_operands): Call to CSR operand parser.
* testsuite/gas/aarch64/csre_csr-invalid.d: New test.
* testsuite/gas/aarch64/csre_csr-invalid.l: New test.
* testsuite/gas/aarch64/csre_csr-invalid.s: New test.
* testsuite/gas/aarch64/csre_csr.d: New test.
* testsuite/gas/aarch64/csre_csr.s: New test.
include/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_CSRE): New -march feature.
(enum aarch64_opnd): New CSR instruction field AARCH64_OPND_CSRE_CSR.
opcodes/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-opc.c (aarch64_print_operand): CSR PDEC operand print-out.
* aarch64-tbl.h (CSRE): New CSRE feature handler.
(_CSRE_INSN): New CSRE instruction type.
(struct aarch64_opcode): New 'csre' entry for a CSRE CLI feature.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds new to Armv8.7 WFET instruction which take one operand:
WFET <Xt>
Where:
<Xt> is 64-bit name of the general-purpose source register, encoded in the
"Rd" field.
For more details regarding WFET (Wait For Event with Timeout) instruction for
Armv8.7-a please refer to Arm A64 Instruction set documentation for Armv8-A
architecture profile, see document pages 565 of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
gas/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update docs.
* testsuite/gas/aarch64/system-5.d: New test.
* testsuite/gas/aarch64/system-5.s: New test.
opcodes/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-tbl.h (struct aarch64_opcode): Add new WFET instruction encoding
and operand description.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds new variant (nXS) of DSB memory barrier instruction
available in Armv8.7-a. New nXS variant has different encoding in
comparison with pre Armv8.7-a DSB memory barrier variant thus new
instruction and new operand was added.
DSB memory nXS barrier variant specifies the limitation on the barrier
operation. Allowed values are:
DSB SYnXS|#28
DSB ISHnXS|#24
DSB NSHnXS|#20
DSB OSHnXS|#16
Please note that till now, for barriers, barrier operation was encoded in
4-bit unsigned immediate CRm field (in the range 0 to 15).
For DSB memory nXS barrier variant, barrier operation is a 5-bit unsigned
assembly instruction immediate, encoded in instruction in two bits CRm<3:2>:
CRm<3:2> #imm
00 16
01 20
10 24
11 28
This patch extends current AArch64 barrier instructions with above mapping.
Notable patch changes include:
+ New DSB memory barrier variant encoding for Armv8.7-a.
+ New operand BARRIER_DSB_NXS for above instruction in order to
distinguish between existing and new DSB instruction flavour.
+ New set of DSB nXS barrier options.
+ New instruction inserter and extractor map between instruction
immediate 5-bit value and 2-bit CRm field of the instruction itself (see
FLD_CRm_dsb_nxs).
+ Regeneration of aarch64-[asm|dis|opc]-2.c files.
+ Test cases to cover new instruction assembling and disassembling.
For more details regarding DSB memory barrier instruction and its
Armv8.7-a flavour please refer to Arm A64 Instruction set documentation
for Armv8-A architecture profile, see document pages 132-133 of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
gas/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Docs update.
* config/tc-aarch64.c (parse_operands): Add
AARCH64_OPND_BARRIER_DSB_NXS handler.
(md_begin): Add content of aarch64_barrier_dsb_nxs_options to
aarch64_barrier_opt_hsh hash.
* testsuite/gas/aarch64/system-4-invalid.d: New test.
* testsuite/gas/aarch64/system-4-invalid.l: New test.
* testsuite/gas/aarch64/system-4-invalid.s: New test.
* testsuite/gas/aarch64/system-4.d: New test.
* testsuite/gas/aarch64/system-4.s: New test.
include/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_BARRIER_DSB_NXS.
(aarch64_barrier_dsb_nxs_options): Declare DSB nXS options.
opcodes/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-asm.c (aarch64_ins_barrier_dsb_nxs): New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): New inserter
ins_barrier_dsb_nx.
* aarch64-dis.c (aarch64_ext_barrier_dsb_nxs): New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): New extractor
ext_barrier_dsb_nx.
* aarch64-opc.c (aarch64_print_operand): New options table
aarch64_barrier_dsb_nxs_options.
* aarch64-opc.h (enum aarch64_field_kind): New field name FLD_CRm_dsb_nxs.
* aarch64-tbl.h (struct aarch64_opcode): Define DSB nXS barrier
Armv8.7-a instruction.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
