1053 Commits

Author	SHA1	Message	Date
Pedro Alves	d7e747318f	Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy ... This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.	2017-02-02 11:11:47 +00:00
Tom Tromey	906768f970	Remove make_cleanup_discard_psymtabs ... This removes make_cleanup_discard_psymtabs in favor of a new class. 2017-01-10 Tom Tromey <tom@tromey.com> * dwarf2read.c (dwarf2_build_psymtabs): Use psymtab_discarder. * psympriv.h (make_cleanup_discard_psymtabs): Don't declare. * psymtab.c (discard_psymtabs_upto): Remove. (make_cleanup_discard_psymtabs): Remove. (struct psymtab_state): Remove.	2017-01-10 19:14:12 -07:00
Tom Tromey	bef155c3e8	Introduce and use gdb::unlinker ... This introduces a new class, gdb::unlinker, that unlinks a file in the destructor. The user of this class has the option to preserve the file instead, by calling the "keep" method. This patch then changes the spots in gdb that use unlink in a cleanup to use this class instead. In one spot I went ahead and removed all the cleanups from the function. This fixes one latent bug -- do_bfd_delete_cleanup could refer to freed memory, by decref'ing the BFD before using its filename. 2017-01-10 Tom Tromey <tom@tromey.com> * record-full.c (record_full_save_cleanups): Remove. (record_full_save): Use gdb::unlinker. * gcore.c (do_bfd_delete_cleanup): Remove. (gcore_command): Use gdb::unlinker, unique_xmalloc_ptr. Remove cleanups. * dwarf2read.c (unlink_if_set): Remove. (write_psymtabs_to_index): Use gdb::unlinker. * common/gdb_unlinker.h: New file.	2017-01-10 19:14:11 -07:00
Tom Tromey	192b62ce0b	Use class to manage BFD reference counts ... This introduces a new specialization of gdb::ref_ptr that can be used to manage BFD reference counts. Then it changes most places in gdb to use this new class, rather than explicit reference-counting or cleanups. This patch removes make_cleanup_bfd_unref. If you look you will see a couple of spots using "release" where a use of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next patch. I think this patch fixes some latent bugs. For example, it seems to me that previously objfpy_add_separate_debug_file leaked a BFD. I'm not 100% certain that the macho_symfile_read_all_oso change is correct. The existing code here is hard for me to follow. One goal of this sort of automated reference counting, though, is to make it more difficult to make logic errors; so hopefully the code is clear now. 2017-01-10 Tom Tromey <tom@tromey.com> * windows-tdep.c (windows_xfer_shared_library): Update. * windows-nat.c (windows_make_so): Update. * utils.h (make_cleanup_bfd_unref): Remove. * utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove. * symfile.h (symfile_bfd_open) (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * symfile.c (read_symbols, symbol_file_add) (separate_debug_file_exists): Update. (symfile_bfd_open): Return gdb_bfd_ref_ptr. (generic_load, reread_symbols): Update. * symfile-mem.c (symbol_file_add_from_memory): Update. * spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr. (spu_symbol_file_add_from_memory): Update. * solist.h (struct target_so_ops) <bfd_open>: Return gdb_bfd_ref_ptr. (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. * solib.c (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. (solib_map_sections, reload_shared_libraries_1): Update. * solib-svr4.c (enable_break): Update. * solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr. * solib-frv.c (enable_break2): Update. * solib-dsbt.c (enable_break): Update. * solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return gdb_bfd_ref_ptr. (darwin_solib_get_all_image_info_addr_at_init): Update. (darwin_bfd_open): Return gdb_bfd_ref_ptr. * solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr. * record-full.c (record_full_save): Update. * python/py-objfile.c (objfpy_add_separate_debug_file): Update. * procfs.c (insert_dbx_link_bpt_in_file): Update. * minidebug.c (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * machoread.c (macho_add_oso_symfile): Change abfd to gdb_bfd_ref_ptr. (macho_symfile_read_all_oso): Update. (macho_check_dsym): Return gdb_bfd_ref_ptr. (macho_symfile_read): Update. * jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr. (jit_bfd_try_read_symtab): Update. * gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. (gdb_bfd_ref_policy): New struct. (gdb_bfd_ref_ptr): New typedef. * gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. * gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr. * gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr. (gcore_command): Update. * exec.c (exec_file_attach): Update. * elfread.c (elf_symfile_read): Update. * dwarf2read.c (dwarf2_get_dwz_file): Update. (try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr. (open_and_init_dwo_file): Update. (open_dwp_file): Return gdb_bfd_ref_ptr. (open_and_init_dwp_file): Update. * corelow.c (core_open): Update. * compile/compile-object-load.c (compile_object_load): Update. * common/gdb_ref_ptr.h (ref_ptr::operator->): New operator. * coffread.c (coff_symfile_read): Update. * cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return gdb_bfd_ref_ptr. Rename. (dump_bfd_file, restore_command): Update. * build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. * build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. (find_separate_debug_file_by_buildid): Update.	2017-01-10 19:14:10 -07:00
Tom Tromey	fc4007c969	Remove make_cleanup_htab_delete ... This removes make_cleanup_htab_delete in favor of destructors, building on an earlier patch that added the htab_up typedef. Testing revealed that more cleanup-removal work was needed in dwarf2loc.c, so this version of the patch changes code there to use unordered_set and vector, removing some more cleanups. 2017-01-10 Tom Tromey <tom@tromey.com> * utils.h (make_cleanup_htab_delete): Don't declare. * utils.c (do_htab_delete_cleanup, make_cleanup_htab_delete): Remove. * linespec.c (decode_compound_collector): Add constructor, destructor. (lookup_prefix_sym): Remove cleanup. (symtab_collector): Add constructor, destructor. (collect_symtabs_from_filename): Remove cleanup. * disasm.c (do_mixed_source_and_assembly): Use htab_up. * compile/compile-c-symbols.c (generate_c_for_variable_locations): Use htab_up. * gnu-v3-abi.c (gnuv3_print_vtable): Use htab_up. * dwarf2read.c (dw2_expand_symtabs_matching) (dw2_map_symbol_filenames, dwarf_decode_macros) (write_psymtabs_to_index): Use htab_up. * dwarf2loc.c (func_verify_no_selftailcall) (call_site_find_chain_1, func_verify_no_selftailcall) (chain_candidate, call_site_find_chain_1): Use std::unordered_set, std::vector, gdb::unique_xmalloc_ptr. (call_sitep): Remove typedef. (dwarf2_locexpr_baton_eval): Remove unused variable.	2017-01-10 19:14:08 -07:00
Joel Brobecker	61baf725ec	update copyright year range in GDB files ... This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.	2017-01-01 10:52:34 +04:00
Tom Tromey	0c1b455e29	PR symtab/16264 - support DW_AT_main_subprogram ... This patch adds support for DW_AT_main_subprogram. This is PR symtab/16264. DW_AT_main_subprogram is used to mark a program's entry point. GCC can emit this, and I hope to change the Rust compiler to emit it as well. GDB already supports an older, pre-DWARF 4 convention adopted by FORTRAN compilers, namely to emit DW_AT_calling_convention for the "main" function. However, I think this support in GDB had a small bug, in that it seems to rely on the DW_AT_name being read before DW_AT_calling_convention. This patch fixes this as well. Built and regtested on x86-64 Fedora 24 and the buildbot. New test case included. 2016-12-02 Tom Tromey <tom@tromey.com> PR symtab/16264: * dwarf2read.c (struct partial_die_info) <main_subprogram>: New member. (add_partial_symbol): Call set_objfile_main_name. (read_partial_die): Handle DW_AT_main_subprogram. <DW_AT_calling_convention>: don't call set_objfile_main_name, but set main_subprogram flag. 2016-12-02 Tom Tromey <tom@tromey.com> * gdb.dwarf2/main-subprogram.c: New file. * gdb.dwarf2/main-subprogram.exp: New file.	2016-12-02 09:11:47 -07:00
Andreas Arnez	da5b30da2d	Fix PR12616 - gdb does not implement DW_AT_data_bit_offset ... The DW_AT_data_bit_offset attribute was introduced by DWARF V4 and allows specifying the offset of a data member within its containing entity. But although the new attribute was intended to replace DW_AT_bit_offset for this purpose, GDB ignores it, and thus GCC still emits DW_AT_bit_offset instead. See also https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71669. This change fixes GDB's lack of support for DW_AT_data_bit_offset and adds an appropriate test case. gdb/ChangeLog: PR gdb/12616 * dwarf2read.c (dwarf2_add_field): Handle the DWARF V4 attribute DW_AT_data_bit_offset. gdb/testsuite/ChangeLog: PR gdb/12616 * gdb.dwarf2/nonvar-access.exp: New testcase. Check that GDB respects the DW_AT_data_bit_offset attribute.	2016-11-24 17:48:03 +01:00
Pedro Alves	2f408ecb92	Use ui_file_as_string throughout more ... This replaces most of the remaining ui_file_xstrdup calls with ui_file_as_string calls. Whenever a call was replaced, that led to a cascade of other necessary adjustments throughout, to make the code use std::string instead of raw pointers. And then whenever I added a std::string as member of a struct, I needed to adjust allocation/destruction of said struct to use new/delete instead of xmalloc/xfree. The stopping point was once gdb built again. These doesn't seem to be a way to reasonably split this out further. Maybe-not-obvious changes: - demangle_for_lookup returns a cleanup today. To get rid of that, and avoid unnecessary string dupping/copying, this introduces a demangle_result_storage type that the caller instantiates and passes to demangle_for_lookup. - Many methods returned a "char *" to indicate that the caller owns the memory and must free it. Those are switched to return a std::string instead. Methods that return a "view" into some internal string return a "const char *" instead. I.e., we only copy/allocate when necessary. gdb/ChangeLog: 2016-11-08 Pedro Alves <palves@redhat.com> * ada-lang.c (ada_name_for_lookup, type_as_string): Use and return std::string. (type_as_string_and_cleanup): Delete. (ada_lookup_struct_elt_type): Use type_as_string. * ada-lang.h (ada_name_for_lookup): Now returns std::string. * ada-varobj.c (ada_varobj_scalar_image): Return a std::string. (ada_varobj_describe_child): Make 'child_name' and 'child_path_expr' parameters std::string pointers. (ada_varobj_describe_struct_child, ada_varobj_describe_ptr_child): Likewise, and use string_printf. (ada_varobj_describe_simple_array_child) (ada_varobj_describe_child): Likewise. (ada_varobj_get_name_of_child, ada_varobj_get_path_expr_of_child) (ada_varobj_get_value_image) (ada_varobj_get_value_of_array_variable) (ada_varobj_get_value_of_variable, ada_name_of_variable) (ada_name_of_child, ada_path_expr_of_child) (ada_value_of_variable): Now returns std::string. Use string_printf. (ada_value_of_child): Adjust. * break-catch-throw.c (check_status_exception_catchpoint): Adjust to use std::string. * breakpoint.c (watch_command_1): Adjust to use std::string. * c-lang.c (c_get_string): Adjust to use std::string. * c-typeprint.c (print_name_maybe_canonical): Use std::string. * c-varobj.c (varobj_is_anonymous_child): Use ==/!= std::string operators. (c_name_of_variable): Now returns a std::string. (c_describe_child): The 'cname' and 'cfull_expression' output parameters are now std::string pointers. Adjust. (c_name_of_child, c_path_expr_of_child, c_value_of_variable) (cplus_number_of_children): Adjust to use std::string and string_printf. (cplus_name_of_variable): Now returns a std::string. (cplus_describe_child): The 'cname' and 'cfull_expression' output parameters are now std::string pointers. Adjust. (cplus_name_of_child, cplus_path_expr_of_child) (cplus_value_of_variable): Now returns a std::string. * cp-abi.c (cplus_typename_from_type_info): Return std::string. * cp-abi.h (cplus_typename_from_type_info): Return std::string. (struct cp_abi_ops) <get_typename_from_type_info>: Return std::string. * cp-support.c (inspect_type): Use std::string. (cp_canonicalize_string_full, cp_canonicalize_string_no_typedefs) (cp_canonicalize_string): Return std::string and adjust. * cp-support.h (cp_canonicalize_string) (cp_canonicalize_string_no_typedefs, cp_canonicalize_string_full): Return std::string. * dbxread.c (read_dbx_symtab): Use std::string. * dwarf2read.c (dwarf2_canonicalize_name): Adjust to use std::string. * gdbcmd.h (lookup_struct_elt_type): Adjust to use std::string. * gnu-v3-abi.c (gnuv3_get_typeid): Use std::string. (gnuv3_get_typename_from_type_info): Return a std::string and adjust. (gnuv3_get_type_from_type_info): Adjust to use std::string. * guile/guile.c (gdbscm_execute_gdb_command): Adjust to use std::string. * infcmd.c (print_return_value_1): Adjust to use std::string. * linespec.c (find_linespec_symbols): Adjust to demangle_for_lookup API change. Use std::string. * mi/mi-cmd-var.c (print_varobj, mi_cmd_var_set_format) (mi_cmd_var_info_type, mi_cmd_var_info_path_expression) (mi_cmd_var_info_expression, mi_cmd_var_evaluate_expression) (mi_cmd_var_assign, varobj_update_one): Adjust to use std::string. * minsyms.c (lookup_minimal_symbol): Use std::string. * python/py-varobj.c (py_varobj_iter_next): Use new instead of XNEW. vitem->name is a std::string now, adjust. * rust-exp.y (convert_ast_to_type, convert_name): Adjust to use std::string. * stabsread.c (define_symbol): Adjust to use std::string. * symtab.c (demangle_for_lookup): Now returns 'const char *'. Add a demangle_result_storage parameter. Use it for storage. (lookup_symbol_in_language) (lookup_symbol_in_objfile_from_linkage_name): Adjust to new demangle_for_lookup API. * symtab.h (struct demangle_result_storage): New type. (demangle_for_lookup): Now returns 'const char *'. Add a demangle_result_storage parameter. * typeprint.c (type_to_string): Return std::string and use ui_file_as_string. * value.h (type_to_string): Change return type to std::string. * varobj-iter.h (struct varobj_item) <name>: Now a std::string. (varobj_iter_delete): Use delete instead of xfree. * varobj.c (create_child): Return std::string instead of char * in output parameter. (name_of_variable, name_of_child, my_value_of_variable): Return std::string instead of char *. (varobj_create, varobj_get_handle): Constify 'objname' parameter. Adjust to std::string fields. (varobj_get_objname): Return a const char * instead of a char *. (varobj_get_expression): Return a std::string. (varobj_list_children): Adjust to use std::string. (varobj_get_type): Return a std::string. (varobj_get_path_expr): Return a const char * instead of a char *. Adjust to std::string fields. (varobj_get_formatted_value, varobj_get_value): Return a std::string. (varobj_set_value): Change type of 'expression' parameter to std::string. Use std::string. (install_new_value): Use std::string. (delete_variable_1): Adjust to use std::string. (create_child): Change the 'name' parameter to a std::string reference. Swap it into the new item's name. (create_child_with_value): Swap item's name into the new child's name. Use string_printf. (new_variable): Use new instead of XNEW. (free_variable): Don't xfree fields that are now std::string. (name_of_variable, name_of_child): Now returns std::string. (value_of_root): Adjust to use std::string. (my_value_of_variable, varobj_value_get_print_value): Return and use std::string. (varobj_value_get_print_value): Adjust to use ui_file_as_string and std::string. * varobj.h (struct varobj) <name, path_expr, obj_name, print_value>: Now std::string's. <name_of_variable, name_of_child, path_expr_of_child, value_of_variable>: Return std::string. (varobj_create, varobj_get_handle): Constify 'objname' parameter. (varobj_get_objname): Return a const char * instead of a char *. (varobj_get_expression, varobj_get_type): Return a std::string. (varobj_get_path_expr): Return a const char * instead of a char *. (varobj_get_formatted_value, varobj_get_value): Return a std::string. (varobj_set_value): Constify 'expression' parameter. (varobj_value_get_print_value): Return a std::string.	2016-11-08 15:26:47 +00:00
Pedro Alves	322a851675	Use ui_file_as_string in dwarf2_compute_name ... gdb/ChangeLog: 2016-11-08 Pedro Alves <palves@redhat.com> * dwarf2read.c (dwarf2_compute_name): Use ui_file_as_string and std::string.	2016-11-08 15:26:44 +00:00
Tom Tromey	9c37b5aed9	Remove Java support ... This patch removes the Java support from gdb. gcj has not seen much development or use for years now, and was recently removed from GCC. This patch changes gdb to follow; in the unlikely event that there are still users using gcj, they can continue to use an older gdb to debug. Or, they can debug in C++ mode. Built and regtested on x86-64 Fedora 24. 2016-10-06 Tom Tromey <tom@tromey.com> * MAINTAINERS: Remove Java test maintainer. * varobj.h (java_varobj_ops): Don't declare. * valprint.h (struct value_print_options) <pascal_static_field_print>: Update comment. * utils.c (producer_is_gcc): Remove java reference. * symtab.h (struct general_symbol_info): Remove java references. (SYMBOL_SEARCH_NAME): Likewise. * objfiles.c (allocate_objfile): Update comment. * linespec.c (find_linespec_symbols): Remove java references. * gnu-v3-abi.c (gnuv3_rtti_type, gnuv3_baseclass_offset): Remove java references. * gdbtypes.h (struct cplus_struct_type) <is_java>: Remove. (TYPE_CPLUS_REALLY_JAVA): Remove. * c-varobj.c (enum vsections): Update comment. * symtab.c (symbol_set_language, symbol_set_names) (symbol_natural_name, symbol_demangled_name) (demangle_for_lookup, symbol_matches_domain) (default_make_symbol_completion_list_break_on_1): Remove java references. (JAVA_PREFIX, JAVA_PREFIX_LEN): Remove. * psymtab.c (match_partial_symbol, psymtab_search_name) (lookup_partial_symbol): Remove java references. * dwarf2read.c (find_slot_in_mapped_hash): Remove java references. (add_partial_symbol, dwarf2_compute_name, dwarf2_physname) (dwarf2_add_member_fn, is_vtable_name, read_structure_type) (process_structure_scope, read_subroutine_type) (read_subrange_type, load_partial_dies) (new_symbol_full, determine_prefix, typename_concat) (dwarf2_name): Remove java references. (set_cu_language): Treat Java as C++. * c-typeprint.c (c_type_print_args): Remove java reference. * defs.h (enum language) <language_java>: Remove. * Makefile.in (SFILES, HFILES_NO_SRCDIR, COMMON_OBS, YYFILES) (YYOBJ, local-maintainer-clean): Don't mention java files. * jv-exp.y, jv-lang.c, jv-lang.h, jv-typeprint.c, jv-valprint.c, jv-varobj.c: Remove. 2016-10-06 Tom Tromey <tom@tromey.com> * guile.texi (Types In Guile): Remove Java mentions. * python.texi (Types In Python): Remove Java mentions. * gdb.texinfo (Address Locations, Supported Languages) (Index Section Format): Remove Java mentions. 2016-10-06 Tom Tromey <tom@tromey.com> * gdb.compile/compile.exp: Change java tests to rust. * gdb.base/setshow.exp: Change java tests to rust. * gdb.base/default.exp: Remove java from language list. * README (Examples): Update language example. * gdb.python/py-lookup-type.exp (test_lookup_type): Remove java test. * lib/gdb.exp (skip_java_tests): Remove. * lib/java.exp: Remove. * gdb.java: Remove.	2016-10-06 10:10:40 -06:00
Pedro Alves	325fac504a	gdb: Use std::min and std::max throughout ... Otherwise including <string> or some other C++ header is broken. E.g.: In file included from /opt/gcc/include/c++/7.0.0/bits/char_traits.h:39:0, from /opt/gcc/include/c++/7.0.0/string:40, from /home/pedro/gdb/mygit/cxx-convertion/src/gdb/infrun.c:68: /opt/gcc/include/c++/7.0.0/bits/stl_algobase.h:243:56: error: macro "min" passed 3 arguments, but takes just 2 min(const _Tp& __a, const _Tp& __b, _Compare __comp) ^ /opt/gcc/include/c++/7.0.0/bits/stl_algobase.h:265:56: error: macro "max" passed 3 arguments, but takes just 2 max(const _Tp& __a, const _Tp& __b, _Compare __comp) ^ In file included from .../src/gdb/infrun.c:21:0: To the best of my grepping abilities, I believe I adjusted all min/max calls. gdb/ChangeLog: 2016-09-16 Pedro Alves <palves@redhat.com> * defs.h (min, max): Delete. * aarch64-tdep.c: Include <algorithm> and use std::min and std::max throughout. * aarch64-tdep.c: Likewise. * alpha-tdep.c: Likewise. * amd64-tdep.c: Likewise. * amd64-windows-tdep.c: Likewise. * arm-tdep.c: Likewise. * avr-tdep.c: Likewise. * breakpoint.c: Likewise. * btrace.c: Likewise. * ctf.c: Likewise. * disasm.c: Likewise. * doublest.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * environ.c: Likewise. * exec.c: Likewise. * f-exp.y: Likewise. * findcmd.c: Likewise. * ft32-tdep.c: Likewise. * gcore.c: Likewise. * hppa-tdep.c: Likewise. * i386-darwin-tdep.c: Likewise. * i386-tdep.c: Likewise. * linux-thread-db.c: Likewise. * lm32-tdep.c: Likewise. * m32r-tdep.c: Likewise. * m88k-tdep.c: Likewise. * memrange.c: Likewise. * minidebug.c: Likewise. * mips-tdep.c: Likewise. * moxie-tdep.c: Likewise. * nds32-tdep.c: Likewise. * nios2-tdep.c: Likewise. * nto-procfs.c: Likewise. * parse.c: Likewise. * ppc-sysv-tdep.c: Likewise. * probe.c: Likewise. * record-btrace.c: Likewise. * remote.c: Likewise. * rs6000-tdep.c: Likewise. * rx-tdep.c: Likewise. * s390-linux-nat.c: Likewise. * s390-linux-tdep.c: Likewise. * ser-tcp.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * source.c: Likewise. * sparc-tdep.c: Likewise. * symfile.c: Likewise. * target-memory.c: Likewise. * target.c: Likewise. * tic6x-tdep.c: Likewise. * tilegx-tdep.c: Likewise. * tracefile-tfile.c: Likewise. * tracepoint.c: Likewise. * valprint.c: Likewise. * value.c: Likewise. * xtensa-tdep.c: Likewise. * cli/cli-cmds.c: Likewise. * compile/compile-object-load.c: Likewise.	2016-09-16 19:55:17 +01:00
Ulrich Weigand	9b790ce722	Add gdbarch callback to provide formats for debug info float types ... At this point, all TYPE_CODE_FLT types carry their floating-point format, except for those creating from reading DWARF or stabs debug info. Those will be addressed by this commit. The main issue here is that we actually have to determine which floating- point format to use. Currently, we only have the type length as input to this decision. In the future, we may hopefully get --at least in DWARF-- additional information to help disambiguate multiple different formats of the same length. For now, we can still look at the type name as a hint. This decision logic is encapsulated in a gdbarch callback to allow platform-specific overrides. The default implementation use the same logic (compare type length against the various gdbarch_..._bit sizes) that is currently implemented in floatformat_from_length. With this commit, all platforms still use the default logic, so there should be no actual change in behavior. A follow-on commit will add support for __float128 on Intel and Power. Once dwarf2read.c and stabsread.c make use of the new callback to determine floating-point formats, we're now sure every TYPE_CODE_FLT type will always carry its format. The commit therefore adds asserts to verify_floatformat to ensure new code will continue to always provide formats, and removes the code in floatformat_from_type that used to handle types with a NULL TYPE_FLOATFORMAT. gdb/ChangeLog: * gdbarch.sh (floatformat_for_type): New gdbarch callback. * gdbarch.h, gdbarch.c: Re-generate. * arch-utils.h (default_floatformat_for_type): New prototype. * arch-utils.c (default_floatformat_for_type): New function. * doublest.c (floatformat_from_length): Remove. (floatformat_from_type): Assume TYPE_FLOATFORMAT is non-NULL. * gdbtypes.c (verify_floatformat): Require non-NULL format. * dwarf2read.c (dwarf2_init_float_type): New function. (read_base_type): Use it. * stabsread.c (dbx_init_float_type): New function. (read_sun_floating_type): Use it. (read_range_type): Likewise. Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>	2016-09-06 17:31:53 +02:00
Ulrich Weigand	19f392bc2a	Unify init_type and arch_type interface and helpers ... This adds a number of helper routines for creating objfile-owned types; these correspond 1:1 to the already existing helper routines for creating gdbarch-owned types, and are intended to be used instead of init_type. A shared fragment of init_float_type and arch_float_type is extracted into a separate subroutine verify_subroutine. The commit also brings the interface of init_type in line with the one for arch_type. In particular, this means removing the FLAGS argument; callers now set the required flags directly. (Since most callers use the new helper routines, very few callers actually need to set any additional flags directly any more.) Note that this means all the TYPE_FLAGS_... defined are no longer needed anywhere; they will be removed by a follow-on commit. All users of init_type are changed to use on of the new helpers where possible. No functional change intended. gdb/ChangeLog: * gdbtypes.h (init_type): Remove FLAGS argument. Move OBJFILE argument to first position. (init_integer_type): New prototype. (init_character_type): Likewise. (init_boolean_type): Likewise. (init_float_type): Likewise. (init_decfloat_type): Likewise. (init_complex_type): Likewise. (init_pointer_type): Likewise. * gdbtypes.c (verify_floatflormat): New function. (init_type): Remove FLAGS argument and processing. Move OBJFILE argument to first position. (init_integer_type): New function. (init_character_type): Likewise. (init_boolean_type): Likewise. (init_float_type): Likewise. (init_decfloat_type): Likewise. (init_complex_type): Likewise. (init_pointer_type): Likewise. (arch_float_type): Use verify_floatflormat. (objfile_type): Use init_..._type helpers instead of calling init_type directly. * dwarf2read.c (fixup_go_packaging): Update to changed init_type prototype. (read_namespace_type): Likewise. (read_module_type): Likewise. (read_typedef): Likewise. (read_unspecified_type): Likewise. (build_error_marker_type): Likewise. (read_base_type): Use init_..._type helpers. * mdebugread.c (basic_type): Use init_..._type helpers. (parse_type): Update to changed init_type prototype. (cross_ref): Likewise. * stabsread.c (rs6000_builtin_type): Use init_..._type helpers. (read_sun_builtin_type): Likewise. (read_sun_floating_type): Likewise. (read_range_type): Likewise. Also update to changed init_type prototype. Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>	2016-09-06 17:27:55 +02:00
Tom Tromey	4aa4e28bdc	Handle DW_OP_form_tls_address ... Currently gdb supports DW_OP_GNU_push_tls_address, but not DW_OP_form_tls_address. I think it would be better if the toolchain as a whole moved to using the standard opcode, and the prerequisite to this is getting gdb to recognize it. GCC can sometimes emit DW_OP_form_tls_address for emultls targets. As far as I know, nobody has ever tried this with gdb (since it wouldn't work at all). I don't think there's a major drawback to using a single opcode for all targets, because computing the location of a thread-local is already target specific. This is PR gdb/11616. I don't know how to write a test case for this; though it's worth noting that there aren't explicit tests for DW_OP_GNU_push_tls_address either -- and if I change GCC, these paths will be tested to the same extent they are now. 2016-09-02 Tom Tromey <tom@tromey.com> PR gdb/11616: * dwarf2read.c (decode_locdesc): Handle DW_OP_form_tls_address. * dwarf2loc.c (dwarf2_compile_expr_to_ax): Handle DW_OP_form_tls_address. (locexpr_describe_location_piece): Likewise. * dwarf2expr.h (struct dwarf_expr_context_funcs): Update comment. * dwarf2expr.c (execute_stack_op): Handle DW_OP_form_tls_address. (ctx_no_get_tls_address): Mention DW_OP_form_tls_address. * compile/compile-loc2c.c (struct insn_info): Update comment. (compute_stack_depth_worker): Handle DW_OP_form_tls_address.	2016-09-02 11:33:00 -06:00
Tom Tromey	e98c9e7ce1	PR rust/20162 - fix gdb regressions caused by rust 1.10 ... PR rust/20162 started life as a reminder to test gdb with versions of rust after 1.8; but now concerns some gdb regressions seen with rust 1.10 ("beta") and 1.11 ("nightly"). The failures turn out to be a discrepancy between how rustc emits DWARF and how gdb interprets it. In particular, rustc will emit DWARF like: <2><bc>: Abbrev Number: 9 (DW_TAG_structure_type) <bd> DW_AT_name : (indirect string, offset: 0x46a): HasMethods <c1> DW_AT_byte_size : 4 ... <3><cc>: Abbrev Number: 11 (DW_TAG_subprogram) ... <df> DW_AT_name : (indirect string, offset: 0x514f): new gdb wants to see a separate top-level DW_TAG_subprogram that refers to this one via DW_AT_specification; but rustc doesn't emit one. By my reading of DWARF 4 5.5.7, this is ok, and gdb is incorrect here. Fixing this involved a new case in scan_partial_symbols, and then a further change in process_structure_scope to account for the fact that, in Rust, such functions are not methods and should not be attached to the structure type. Next, it turns out that rust is emitting bad values for DW_AT_linkage_name, e.g.: <db> DW_AT_linkage_name: (indirect string, offset: 0x422): _ZN7methods8{{impl}}3newE The the "{{impl}}" stuff is apparently some side effect of a change to the compiler's internal representation. Oops! This also had a simple fix -- disregard these mangled names. With these changes, there are no regressions in the gdb Rust tests with either 1.10 or 1.11. 1.9, the stable release, is still pretty broken, but I think there's nothing much to do about that. These changes are a bit hackish, but no worse, I think, than other kinds of quirk handling already done in the DWARF parser. I have reported all the rustc bugs upstream. I plan to remove these hacks from gdb some suitable time after they have been fixed in released versions of Rust. 2016-07-22 Tom Tromey <tom@tromey.com> PR rust/20162: * dwarf2read.c (scan_partial_symbols) <DW_TAG_structure_type>: Call scan_partial_symbols for children when reading a Rust CU. (dwarf2_physname): Ignore invalid DW_AT_linkage_name generated by rustc. (process_structure_scope) <DW_TAG_subprogram>: Call read_func_scope for Rust.	2016-07-22 11:42:08 -06:00
Tom Tromey	ac29888840	Remove some variables but call functions for side effects ... This patch consolidates the (possibly-questionable) spots where we remove a declaration but continue to call some function for side effects. In a couple of cases it wasn't entirely clear to me that this mattered; and in some other cases it might be more aesthetically pleasing to use ATTRIBUTE_UNUSED. So, I broke this out into a separate patch for simpler review. 2016-07-14 Tom Tromey <tom@tromey.com> * arch-utils.c (default_skip_permanent_breakpoint): Remove "bp_insn". * disasm.c (do_assembly_only): Remove "num_displayed". * dwarf2read.c (read_abbrev_offset): Remove "length". (dwarf_decode_macro_bytes) <DW_MACINFO_vendor_ext>: Remove "constant". * m32c-tdep.c (make_regs): Remove "r2hl", "r3hl", and "intbhl". * microblaze-tdep.c (microblaze_frame_cache): Remove "func". * tracefile.c (trace_save): Remove "status".	2016-07-14 10:35:40 -06:00
Jan Kratochvil	e385593eef	PR 15231: import bare DW_TAG_lexical_block ... Local variables in lambdas are not accessible https://sourceware.org/bugzilla/show_bug.cgi?id=15231 GDB: read_lexical_block_scope /* Ignore blocks with missing or invalid low and high pc attributes. */ [...] if (!dwarf2_get_pc_bounds (die, &lowpc, &highpc, cu, NULL)) return; But sometimes there is: FAIL: gcc-5.3.1-6.fc23.x86_64 <2><92>: Abbrev Number: 11 (DW_TAG_lexical_block) <3><9c>: Abbrev Number: 13 (DW_TAG_structure_type) <9d> DW_AT_name : (indirect string, offset: 0x3c): <lambda()> [...] Where DW_TAG_lexical_block has no attributes. Such whole subtree is currently dropped by GDB while I think it should just import all its children DIEs. It even XFAIL->XPASSes gdb.ada/out_of_line_in_inlined.exp: commit 0fa7fe506c Author: Joel Brobecker <brobecker@adacore.com> out of line functions nested inside inline functions. So I have removed that xfail. gdb/ChangeLog 2016-05-30 Jan Kratochvil <jan.kratochvil@redhat.com> PR c++/15231 * dwarf2read.c (enum pc_bounds_kind): Add PC_BOUNDS_INVALID. (process_psymtab_comp_unit_reader, read_func_scope): Adjust callers. (read_lexical_block_scope): Import DIEs from bare DW_TAG_lexical_block. (read_call_site_scope): Adjust callers. (dwarf2_get_pc_bounds): Implement pc_bounds_invalid. (dwarf2_get_subprogram_pc_bounds, get_scope_pc_bounds): Adjust callers. gdb/testsuite/ChangeLog 2016-05-30 Jan Kratochvil <jan.kratochvil@redhat.com> PR c++/15231 * gdb.ada/out_of_line_in_inlined.exp: Remove xfails. * gdb.dwarf2/dw2-lexical-block-bare.exp: New file.	2016-05-30 14:14:43 +02:00
Jan Kratochvil	3a2b436ae9	Code cleanup: dwarf2_get_pc_bounds: -1/0/+1 -> enum ... Make the code (maybe) more readable + primarily prepare it for [patch 2/2] enum extension. This change should have no code change impact. gdb/ChangeLog 2016-05-30 Jan Kratochvil <jan.kratochvil@redhat.com> Code cleanup: dwarf2_get_pc_bounds: -1/0/+1 -> enum * dwarf2read.c (enum pc_bounds_kind) New. (dwarf2_get_pc_bounds): Use it in the declaration. (process_psymtab_comp_unit_reader): Adjust caller. Rename has_pc_info to cu_bounds_kind. (read_func_scope, read_lexical_block_scope, read_call_site_scope): Adjust callers. (dwarf2_get_pc_bounds): Use enum pc_bounds_kind in the definition. (dwarf2_get_subprogram_pc_bounds, get_scope_pc_bounds): Adjust callers.	2016-05-30 14:11:43 +02:00
Tom Tromey	c44af4ebc0	Add support for the Rust language ... This patch adds support for the Rust language. 2016-05-17 Tom Tromey <tom@tromey.com> Manish Goregaokar <manishsmail@gmail.com> * symtab.c (symbol_find_demangled_name): Handle Rust. * symfile.c (init_filename_language_table): Treat ".rs" as Rust. * std-operator.def (STRUCTOP_ANONYMOUS, OP_RUST_ARRAY): New constants. * rust-lang.h: New file. * rust-lang.c: New file. * rust-exp.y: New file. * dwarf2read.c (read_file_scope): Add Rust producer sniffing. (dwarf2_compute_name, read_func_scope, read_structure_type) (read_base_type, read_subrange_type, set_cu_language) (new_symbol_full, determine_prefix): Handle Rust. * defs.h (enum language) <language_rust>: New constant. * Makefile.in (SFILES): Add rust-exp.y, rust-lang.c. (COMMON_OBS): Add rust-exp.o, rust-lang.o. 2016-05-17 Tom Tromey <tom@tromey.com> * gdb.base/default.exp (set language): Add rust.	2016-05-17 12:02:00 -06:00
Trevor Saunders	870f88f755	remove trivialy unused variables ... gdb/ChangeLog: 2016-05-07 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * aarch64-linux-tdep.c (aarch64_linux_sigframe_init): Remove unused variables. * aarch64-tdep.c (aarch64_skip_prologue): Likewise. (aarch64_scan_prologue): Likewise. (aarch64_prologue_prev_register): Likewise. (aarch64_dwarf2_prev_register): Likewise. (pass_in_v): Likewise. (aarch64_push_dummy_call): Likewise. (aarch64_breakpoint_from_pc): Likewise. (aarch64_return_in_memory): Likewise. (aarch64_return_value): Likewise. (aarch64_displaced_step_b_cond): Likewise. (aarch64_displaced_step_cb): Likewise. (aarch64_displaced_step_tb): Likewise. (aarch64_gdbarch_init): Likewise. (aarch64_process_record): Likewise. * alpha-mdebug-tdep.c (alpha_mdebug_init_abi): Likewise. * alpha-tdep.c (_initialize_alpha_tdep): Likewise. * amd64-dicos-tdep.c (amd64_dicos_init_abi): Likewise. * amd64-linux-tdep.c (amd64_dtrace_parse_probe_argument): Likewise. * amd64-tdep.c (fixup_riprel): Likewise. * amd64-windows-tdep.c (amd64_windows_frame_decode_epilogue): Likewise. (amd64_windows_frame_decode_insns): Likewise. (amd64_windows_frame_cache): Likewise. (amd64_windows_frame_prev_register): Likewise. (amd64_windows_frame_this_id): Likewise. (amd64_windows_init_abi): Likewise. * arm-linux-tdep.c (arm_linux_get_syscall_number): Likewise. (arm_linux_get_next_pcs_syscall_next_pc): Likewise. * arm-symbian-tdep.c (arm_symbian_init_abi): Likewise. * arm-tdep.c (arm_make_epilogue_frame_cache): Likewise. (arm_epilogue_frame_prev_register): Likewise. (arm_record_vdata_transfer_insn): Likewise. (arm_record_exreg_ld_st_insn): Likewise. * auto-load.c (execute_script_contents): Likewise. (print_scripts): Likewise. * avr-tdep.c (avr_frame_prev_register): Likewise. (avr_push_dummy_call): Likewise. * bfin-linux-tdep.c (bfin_linux_sigframe_init): Likewise. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * blockframe.c (find_pc_partial_function_gnu_ifunc): Likewise. * break-catch-throw.c (fetch_probe_arguments): Likewise. * breakpoint.c (breakpoint_xfer_memory): Likewise. (breakpoint_init_inferior): Likewise. (breakpoint_inserted_here_p): Likewise. (software_breakpoint_inserted_here_p): Likewise. (hardware_breakpoint_inserted_here_p): Likewise. (bpstat_what): Likewise. (break_range_command): Likewise. (save_breakpoints): Likewise. * coffread.c (coff_symfile_read): Likewise. * cris-tdep.c (cris_push_dummy_call): Likewise. (cris_scan_prologue): Likewise. (cris_register_size): Likewise. (_initialize_cris_tdep): Likewise. * d-exp.y: Likewise. * dbxread.c (dbx_read_symtab): Likewise. (process_one_symbol): Likewise. (coffstab_build_psymtabs): Likewise. (elfstab_build_psymtabs): Likewise. * dicos-tdep.c (dicos_init_abi): Likewise. * disasm.c (do_mixed_source_and_assembly): Likewise. (gdb_disassembly): Likewise. * dtrace-probe.c (dtrace_process_dof): Likewise. * dwarf2read.c (error_check_comp_unit_head): Likewise. (build_type_psymtabs_1): Likewise. (skip_one_die): Likewise. (process_imported_unit_die): Likewise. (dwarf2_physname): Likewise. (read_file_scope): Likewise. (setup_type_unit_groups): Likewise. (create_dwo_cu_reader): Likewise. (create_dwo_cu): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (lookup_dwo_unit_in_dwp): Likewise. (free_dwo_file): Likewise. (check_producer): Likewise. (dwarf2_add_typedef): Likewise. (dwarf2_add_member_fn): Likewise. (read_unsigned_leb128): Likewise. (read_signed_leb128): Likewise. (dwarf2_const_value): Likewise. (follow_die_sig_1): Likewise. (dwarf_decode_macro_bytes): Likewise. * extension.c (restore_active_ext_lang): Likewise. * frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise. * ft32-tdep.c (ft32_analyze_prologue): Likewise. * gdbtypes.c (lookup_typename): Likewise. (resolve_dynamic_range): Likewise. (check_typedef): Likewise. * h8300-tdep.c (h8300_is_argument_spill): Likewise. (h8300_gdbarch_init): Likewise. * hppa-tdep.c (hppa32_push_dummy_call): Likewise. (hppa_frame_this_id): Likewise. (_initialize_hppa_tdep): Likewise. * hppanbsd-tdep.c (hppanbsd_sigtramp_cache_init): Likewise. * hppaobsd-tdep.c (hppaobsd_supply_fpregset): Likewise. * i386-dicos-tdep.c (i386_dicos_init_abi): Likewise. * i386-tdep.c (i386_bnd_type): Likewise. (i386_gdbarch_init): Likewise. (i386_mpx_bd_base): Likewise. * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Likewise. * i386obsd-tdep.c (i386obsd_elf_init_abi): Likewise. * ia64-tdep.c (examine_prologue): Likewise. (ia64_frame_cache): Likewise. (ia64_push_dummy_call): Likewise. * infcmd.c (finish_command_fsm_async_reply_reason): Likewise. (default_print_one_register_info): Likewise. * infrun.c (infrun_thread_ptid_changed): Likewise. (thread_still_needs_step_over): Likewise. (stop_all_threads): Likewise. (restart_threads): Likewise. (keep_going_stepped_thread): Likewise. * iq2000-tdep.c (iq2000_scan_prologue): Likewise. * language.c (language_init_primitive_type_symbols): Likewise. * linespec.c (add_sal_to_sals): Likewise. * linux-nat.c (status_callback): Likewise. (kill_unfollowed_fork_children): Likewise. (linux_nat_kill): Likewise. * linux-tdep.c (linux_fill_prpsinfo): Likewise. * linux-thread-db.c (thread_db_notice_clone): Likewise. (record_thread): Likewise. * location.c (string_to_event_location_basic): Likewise. * m32c-tdep.c (m32c_prev_register): Likewise. * m32r-linux-tdep.c (m32r_linux_init_abi): Likewise. * m32r-tdep.c (decode_prologue): Likewise. * m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise. * machoread.c (macho_symtab_read): Likewise. (macho_symfile_read): Likewise. (macho_symfile_offsets): Likewise. * maint.c (set_per_command_cmd): Likewise. * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise. (mi_cmd_stack_list_variables): Likewise. * mi/mi-main.c (mi_cmd_exec_run): Likewise. (output_register): Likewise. (mi_cmd_execute): Likewise. (mi_cmd_trace_define_variable): Likewise. (print_variable_or_computed): Likewise. * minsyms.c (prim_record_minimal_symbol_full): Likewise. * mn10300-tdep.c (mn10300_frame_prev_register): Likewise. * msp430-tdep.c (msp430_pseudo_register_write): Likewise. * mt-tdep.c (mt_registers_info): Likewise. * nios2-tdep.c (nios2_analyze_prologue): Likewise. (nios2_push_dummy_call): Likewise. (nios2_frame_unwind_cache): Likewise. (nios2_stub_frame_cache): Likewise. (nios2_stub_frame_sniffer): Likewise. (nios2_gdbarch_init): Likewise. * ppc-ravenscar-thread.c: Likewise. * ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise. * python/py-evts.c (add_new_registry): Likewise. * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise. (bpfinishpy_detect_out_scope_cb): Likewise. * python/py-framefilter.c (py_print_value): Likewise. * python/py-inferior.c (infpy_write_memory): Likewise. * python/py-infevents.c (create_inferior_call_event_object): Likewise. * python/py-infthread.c (thpy_get_ptid): Likewise. * python/py-linetable.c (ltpy_get_pcs_for_line): Likewise. (ltpy_get_all_source_lines): Likewise. (ltpy_is_valid): Likewise. (ltpy_iternext): Likewise. * python/py-symtab.c (symtab_and_line_to_sal_object): Likewise. * python/py-unwind.c (pyuw_object_attribute_to_pointer): Likewise. (unwind_infopy_str): Likewise. * python/py-varobj.c (py_varobj_get_iterator): Likewise. * ravenscar-thread.c (ravenscar_inferior_created): Likewise. * rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise. * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise. * s390-linux-tdep.c (s390_supply_tdb_regset): Likewise. (s390_frame_prev_register): Likewise. (s390_dwarf2_frame_init_reg): Likewise. (s390_record_vr): Likewise. (s390_process_record): Likewise. * score-tdep.c (score_push_dummy_call): Likewise. (score3_analyze_prologue): Likewise. * sh-tdep.c (sh_extract_return_value_nofpu): Likewise. * sh64-tdep.c (sh64_analyze_prologue): Likewise. (sh64_push_dummy_call): Likewise. (sh64_extract_return_value): Likewise. (sh64_do_fp_register): Likewise. * solib-aix.c (solib_aix_get_section_offsets): Likewise. * solib-darwin.c (darwin_read_exec_load_addr_from_dyld): Likewise. (darwin_solib_read_all_image_info_addr): Likewise. * solib-dsbt.c (enable_break): Likewise. * solib-frv.c (enable_break2): Likewise. (frv_fdpic_find_canonical_descriptor): Likewise. * solib-svr4.c (svr4_handle_solib_event): Likewise. * sparc-tdep.c (sparc_skip_stack_check): Likewise. * sparc64-linux-tdep.c (sparc64_linux_get_longjmp_target): Likewise. * sparcobsd-tdep.c (sparc32obsd_init_abi): Likewise. * spu-tdep.c (info_spu_dma_cmdlist): Likewise. * stack.c (read_frame_local): Likewise. * symfile.c (symbol_file_add_separate): Likewise. (remove_symbol_file_command): Likewise. * symmisc.c (maintenance_print_one_line_table): Likewise. * symtab.c (symbol_cache_flush): Likewise. (basic_lookup_transparent_type): Likewise. (sort_search_symbols_remove_dups): Likewise. * target.c (target_memory_map): Likewise. (target_detach): Likewise. (target_resume): Likewise. (acquire_fileio_fd): Likewise. (target_store_registers): Likewise. * thread.c (print_thread_info_1): Likewise. * tic6x-tdep.c (tic6x_analyze_prologue): Likewise. * tilegx-linux-tdep.c (tilegx_linux_sigframe_init): Likewise. * tilegx-tdep.c (tilegx_push_dummy_call): Likewise. (tilegx_analyze_prologue): Likewise. (tilegx_stack_frame_destroyed_p): Likewise. (tilegx_frame_cache): Likewise. * tracefile.c (trace_save): Likewise. * tracepoint.c (encode_actions_and_make_cleanup): Likewise. (start_tracing): Likewise. (print_one_static_tracepoint_marker): Likewise. * tui/tui.c (tui_enable): Likewise. * valops.c (value_struct_elt_bitpos): Likewise. (find_overload_match): Likewise. (find_oload_champ): Likewise. * value.c (value_contents_copy_raw): Likewise. * windows-tdep.c (windows_get_tlb_type): Likewise. * x86-linux-nat.c (x86_linux_enable_btrace): Likewise. * xcoffread.c (record_minimal_symbol): Likewise. (scan_xcoff_symtab): Likewise. * xtensa-tdep.c (execute_code): Likewise. (xtensa_gdbarch_init): Likewise. (_initialize_xtensa_tdep): Likewise.	2016-05-07 20:12:53 -04:00
Doug Evans	6c4474237a	PR symtab/19914 fix handling of dwp + split debug ... PR symtab/19914 * dwarf2read.c (open_and_init_dwp_file): Look at backlink if objfile is separate debug file. testsuite/ * gdb.dwarf2/dwp-sepdebug.c: New file. * gdb.dwarf2/dwp-sepdebug.exp: New file.	2016-05-03 16:30:58 -07:00
Pedro Alves	b36cec19e8	Add missing sentinel 'char *' casts in concat/reconcat calls ... The wildebeest-debian-wheezy-i686 buildslave's build is broken due to: ../../binutils-gdb/gdb/python/python.c: In function void _initialize_python(): ../../binutils-gdb/gdb/python/python.c:1709:36: error: missing sentinel in function call [-Werror=format] Reproduced on Fedora 23 by sticking a few: #undef NULL #define 0 in build/gdb/build-gnulib/{stddef|signal|stdio}.h. Hopefully this caught all instances. gdb/ChangeLog: 2016-04-21 Pedro Alves <palves@redhat.com> * dwarf2read.c (try_open_dwop_file, open_dwo_file) (file_file_name, file_full_name): Add char * cast to sentinel in concat/reconcat calls. * event-top.c (top_level_prompt): Likewise. * guile/guile.c (initialize_scheme_side): Likewise. * linux-tdep.c (linux_fill_prpsinfo): Likewise. * macrotab.c (macro_source_fullname): Likewise. * main.c (get_init_files, captured_main): Likewise. * psymtab.c (psymtab_to_fullname): Likewise. * python/python.c (_initialize_python) (gdbpy_finish_initialization): Likewise. * source.c (symtab_to_fullname): Likewise.	2016-04-21 11:34:18 +01:00
Bernhard Heckel	285866651c	Fix detection of gfortran compilers. ... Newer gfortran compilers changed naming convention in DW_AT_producer tag. For example "GNU Fortran 4.6.3" vs "GNU Fortran2008 5.3.0" 2016-03-02 Bernhard Heckel <bernhard.heckel@intel.com> gdb/Changelog: * dwarf2read.c (new_symbol_full): Fix detection of gfortran compilers.	2016-03-02 15:31:20 +01:00
Jonas Hahnfeld	dc36518224	GDB SIGSEGV opening a Fortran program compiled with ifort ... This patch fixes a SIGSEGV when trying to open a Fortran program compiled with ifort (reproduced using version using version 16.0.1.150). The error can be reproduce with most, if not any program. For instance, a single file only containing "end", compiled with no additional flag, suffices. gdb/ChangeLog: PR gdb/19208 * dwarf2read.c (read_partial_die): Do not call set_objfile_main_name if the function has no name.	2016-01-17 10:11:02 +04:00
Joel Brobecker	618f726fcb	GDB copyright headers update after running GDB's copyright.py script. ... gdb/ChangeLog: Update year range in copyright notice of all files.	2016-01-01 08:43:22 +04:00
Andrew Burgess	28d2bfb9c3	gdb: Handle multiple base address in debug_ranges data. ... It is possible to use multiple base addresses within a single address range series, within the .debug_ranges section. The following is a simplified example for 32-bit addresses: .section ".debug_ranges" .4byte 0xffffffff .4byte BASE_1 .4byte START_OFFSET_1 .4byte END_OFFSET_1 .4byte START_OFFSET_2 .4byte END_OFFSET_2 .4byte 0xffffffff .4byte BASE_2 .4byte START_OFFSET_3 .4byte END_OFFSET_3 .4byte 0 .4byte 0 In this example START/END 1 and 2 are relative to BASE_1, while START/END 3 are relative to BASE_2. Currently gdb does not correctly parse this DWARF, resulting in corrupted address range information. This commit fixes this issue, and adds a new test to cover this case. In order to support testing of this feature extensions were made to the testsuite dwarf assembler, additional functionality was added to the .debug_line generation function, and a new function for generating the .debug_ranges section was added. gdb/ChangeLog: * dwarf2read.c (dwarf2_ranges_read): Unify and fix base address reading code. gdb/testsuite/ChangeLog: * gdb.dwarf2/dw2-ranges-base.c: New file. * gdb.dwarf2/dw2-ranges-base.exp: New file. * lib/dwarf.exp (namespace eval Dwarf): Add new variables to support additional line table, and debug ranges generation. (Dwarf::ranges): New function, generate .debug_ranges. (Dwarf::lines): Support generating simple line table programs. (Dwarf::assemble): Initialise new namespace variables.	2015-12-10 09:53:46 +00:00
Joel Brobecker	155bfbd30a	gdb/dwarf2read: Minimal handling of non-constant struct sizes. ... Using the gdb.ada/var_rec_arr.exp test, where the program declares an array of variant records... type Record_Type (I : Small_Type := 0) is record S : String (1 .. I); end record; type Array_Type is array (Integer range <>) of Record_Type; ... and then a variable A1 of type Array_Type, the following command ocassionally trigger an internal error trying to allocate more memory than we have left: (gdb) ptype a1(1) [...]/utils.c:1089: internal-error: virtual memory exhausted. A problem internal to GDB has been detected, [...] What happens is that recent versions of GNAT are able to generate DWARF expressions for type Record_Type, and therefore the record's DW_AT_byte_size is not a constant, which unfortunately breaks an assumption made by dwarf2read.c:read_structure_type when it does: attr = dwarf2_attr (die, DW_AT_byte_size, cu); if (attr) { TYPE_LENGTH (type) = DW_UNSND (attr); } As a result of this, when ada_evaluate_subexp tries to create a value_zero for a1(1) while processing the OP_FUNCALL operator as part of evaluating the subscripting operation in no-side-effect mode, we try to allocate a value with a bogus size, potentially triggering the out-of-memory internal error. This patch avoids this issue by setting the length to zero in this case. Until we decide to start supporting dynamic type lengths in GDB's type struct, and it's not clear yet that this is worth the effort (see added comment), that's probably the best we can do. gdb/ChangeLog: * dwarf2read.c (read_structure_type): Set the type's length to zero if it has a DW_AT_byte_size attribute which is not a constant. gdb/testsuite/ChangeLog: * testsuite/gdb.ada/var_rec_arr.exp: Add "ptype a1(1)" test.	2015-11-23 09:44:16 -08:00
Dominik Vogt	66c6502d7a	gdb: Fix left shift of negative value. ... This patch fixes all occurences of left-shifting negative constants in C cod which is undefined by the C standard. gdb/ChangeLog: * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend) (prologue_inst_adjust_sp, hppa_frame_cache): Fix left shift of negative value. * dwarf2read.c (read_subrange_type): Likewise.	2015-11-17 10:56:32 +01:00
Simon Marchi	b40699581c	dwarf2read.c: Add cast ... There is no enum value representing 0. It seems like the value of the name field is irrelevant here. gdb/ChangeLog: * dwarf2read.c (partial_die_full_name): Add cast.	2015-10-29 13:43:01 -04:00
Keven Boell	3f2f83ddcb	fort_dyn_array: add basic fortran dyn array support ... Fortran provide types whose values may be dynamically allocated or associated with a variable under explicit program control. The purpose of this commit is: * to read allocated/associated DWARF tags and store them in the dynamic property list of main_type. * enable GDB to print the value of a dynamic array in Fortran in case the type is allocated or associated (pointer to dynamic array). Examples: (gdb) p vla_not_allocated $1 = <not allocated> (gdb) p vla_allocated $1 = (1, 2, 3) (gdb) p vla_ptr_not_associated $1 = <not associated> (gdb) p vla_ptr_associated $1 = (1, 2, 3) Add basic test coverage for most dynamic array use-cases in Fortran. The commit contains the following tests: * Ensure that values of Fortran dynamic arrays can be evaluated correctly in various ways and states. * Ensure that Fortran primitives can be evaluated correctly when used as a dynamic array. * Dynamic arrays passed to subroutines and handled in different ways inside the routine. * Ensure that the ptype of dynamic arrays in Fortran can be printed in GDB correctly. * Ensure that dynamic arrays in different states (allocated/associated) can be evaluated. * Dynamic arrays passed to functions and returned from functions. * History values of dynamic arrays can be accessed and printed again with the correct values. * Dynamic array evaluations using MI protocol. * Sizeof output of dynamic arrays in various states. The patch was tested using the test suite on Ubuntu 12.04 64bit. gdb/ChangeLog: * dwarf2read.c (set_die_type): Add read of DW_AT_allocated and DW_AT_associated. * f-typeprint.c: New include of typeprint.h (f_print_type): Add check for allocated/associated status of type. (f_type_print_varspec_suffix): Add check for allocated/associated status of type. * gdbtypes.c (create_array_type_with_stride): Add check for valid data location of type in case allocated or associated attributes are set. Length of an array should be only calculated if allocated or associated is resolved as true. (is_dynamic_type_internal): Add check for allocated/ associated. (resolve_dynamic_array): Evaluate allocated/associated properties. * gdbtypes.h (enum dynamic_prop_node_kind): <DYN_PROP_ALLOCATED> <DYN_PROP_ASSOCIATED>: New enums. (TYPE_ALLOCATED_PROP, TYPE_ASSOCIATED_PROP): New macros. (type_not_allocated): New function. (type_not_associated): New function. * valarith.c (value_subscripted_rvalue): Add check for allocated/associated. * valprint.c: New include of typeprint.h. (valprint_check_validity): Add check for allocated/associated. (value_check_printable): Add check for allocated/ associated. * typeprint.h (val_print_not_allocated): New function. (val_print_not_associated): New function. * typeprint.c (val_print_not_allocated): New function. (val_print_not_associated): New function. gdb/testsuite/ChangeLog: * gdb.fortran/vla-alloc-assoc.exp: New file. * gdb.fortran/vla-datatypes.exp: New file. * gdb.fortran/vla-datatypes.f90: New file. * gdb.fortran/vla-history.exp: New file. * gdb.fortran/vla-ptype-sub.exp: New file. * gdb.fortran/vla-ptype.exp: New file. * gdb.fortran/vla-sizeof.exp: New file. * gdb.fortran/vla-sub.f90: New file. * gdb.fortran/vla-value-sub-arbitrary.exp: New file. * gdb.fortran/vla-value-sub-finish.exp: New file. * gdb.fortran/vla-value-sub.exp: New file. * gdb.fortran/vla-value.exp: New file. * gdb.fortran/vla-ptr-info.exp: New file. * gdb.mi/mi-vla-fortran.exp: New file. * gdb.mi/vla.f90: New file.	2015-10-21 15:37:46 -04:00
Pedro Alves	e6a959d68b	More char constification ... Trivial constifications flagged by G++. E.g.: src/gdb/c-varobj.c: In function ‘void c_describe_child(const varobj*, int, char**, value**, type**, char**)’: src/gdb/c-varobj.c:373:33: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive] char *join = was_ptr ? "->" : "."; ^ gdb/ChangeLog: 2015-10-13 Pedro Alves <palves@redhat.com> * ada-lang.c (ada_enum_name): Constify local. * ada-typeprint.c (print_range_bound): Constify locals. * c-varobj.c (c_describe_child): Likewise. * cli/cli-setshow.c (do_set_command): Likewise. * gdb_vecs.c (delim_string_to_char_ptr_vec_append): Likewise. * dwarf2read.c (find_file_and_directory): Likewise. (anonymous_struct_prefix, dwarf2_name): Likewise. * gnu-v3-abi.c (gnuv3_rtti_type): Likewise. * go-lang.c (unpack_mangled_go_symbol): Likewise. * jv-typeprint.c (java_type_print_base): Likewise. * ser-tcp.c (net_open): Likewise. * symfile.c (deduce_language_from_filename): Likewise. * symtab.c (gdb_mangle_name): Likewise. * tui/tui-io.c (tui_redisplay_readline): Likewise.	2015-10-13 19:40:50 +01:00
Doug Evans	1fd60fc077	dwarf2read.c (setup_type_unit_groups): Add comment. ... gdb/ChangeLog: * dwarf2read.c (setup_type_unit_groups): Add comment.	2015-09-30 12:29:48 -07:00
Simon Marchi	9a3c826307	Add some more casts (1/2) ... Note: I needed to split this patch in two, otherwise it's too big for the mailing list. This patch adds explicit casts to situations where a void pointer is assigned to a pointer to the "real" type. Building in C++ mode requires those assignments to use an explicit cast. This includes, for example: - callback arguments (cleanups, comparison functions, ...) - data attached to some object (objfile, program space, etc) in the form of a void pointer - "user data" passed to some function This patch comes from the commit "(mostly) auto-generated patch to insert casts needed for C++", taken from Pedro's C++ branch. Only files built on x86 with --enable-targets=all are modified, so the native files for other arches will need to be dealt with separately. I built-tested this with --enable-targets=all and reg-tested. To my surprise, a test case (selftest.exp) had to be adjusted. Here's the ChangeLog entry. Again, this was relatively quick to make despite the length, thanks to David Malcom's script, although I don't believe it's very useful information in that particular case... gdb/ChangeLog: * aarch64-tdep.c (aarch64_make_prologue_cache): Add cast(s). (aarch64_make_stub_cache): Likewise. (value_of_aarch64_user_reg): Likewise. * ada-lang.c (ada_inferior_data_cleanup): Likewise. (get_ada_inferior_data): Likewise. (get_ada_pspace_data): Likewise. (ada_pspace_data_cleanup): Likewise. (ada_complete_symbol_matcher): Likewise. (ada_exc_search_name_matches): Likewise. * ada-tasks.c (get_ada_tasks_pspace_data): Likewise. (get_ada_tasks_inferior_data): Likewise. * addrmap.c (addrmap_mutable_foreach_worker): Likewise. (splay_obstack_alloc): Likewise. (splay_obstack_free): Likewise. * alpha-linux-tdep.c (alpha_linux_supply_gregset): Likewise. (alpha_linux_collect_gregset): Likewise. (alpha_linux_supply_fpregset): Likewise. (alpha_linux_collect_fpregset): Likewise. * alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise. * alpha-tdep.c (alpha_lds): Likewise. (alpha_sts): Likewise. (alpha_sigtramp_frame_unwind_cache): Likewise. (alpha_heuristic_frame_unwind_cache): Likewise. (alpha_supply_int_regs): Likewise. (alpha_fill_int_regs): Likewise. (alpha_supply_fp_regs): Likewise. (alpha_fill_fp_regs): Likewise. * alphanbsd-tdep.c (alphanbsd_supply_fpregset): Likewise. (alphanbsd_aout_supply_gregset): Likewise. (alphanbsd_supply_gregset): Likewise. * amd64-linux-tdep.c (amd64_linux_init_abi): Likewise. (amd64_x32_linux_init_abi): Likewise. * amd64-nat.c (amd64_supply_native_gregset): Likewise. (amd64_collect_native_gregset): Likewise. * amd64-tdep.c (amd64_frame_cache): Likewise. (amd64_sigtramp_frame_cache): Likewise. (amd64_epilogue_frame_cache): Likewise. (amd64_supply_fxsave): Likewise. (amd64_supply_xsave): Likewise. (amd64_collect_fxsave): Likewise. (amd64_collect_xsave): Likewise. * amd64-windows-tdep.c (amd64_windows_frame_cache): Likewise. * amd64obsd-tdep.c (amd64obsd_trapframe_cache): Likewise. * arm-linux-tdep.c (arm_linux_supply_gregset): Likewise. (arm_linux_collect_gregset): Likewise. (arm_linux_supply_nwfpe): Likewise. (arm_linux_collect_nwfpe): Likewise. (arm_linux_supply_vfp): Likewise. (arm_linux_collect_vfp): Likewise. * arm-tdep.c (arm_find_mapping_symbol): Likewise. (arm_prologue_unwind_stop_reason): Likewise. (arm_prologue_this_id): Likewise. (arm_prologue_prev_register): Likewise. (arm_exidx_data_free): Likewise. (arm_find_exidx_entry): Likewise. (arm_stub_this_id): Likewise. (arm_m_exception_this_id): Likewise. (arm_m_exception_prev_register): Likewise. (arm_normal_frame_base): Likewise. (gdb_print_insn_arm): Likewise. (arm_objfile_data_free): Likewise. (arm_record_special_symbol): Likewise. (value_of_arm_user_reg): Likewise. * armbsd-tdep.c (armbsd_supply_fpregset): Likewise. (armbsd_supply_gregset): Likewise. * auto-load.c (auto_load_pspace_data_cleanup): Likewise. (get_auto_load_pspace_data): Likewise. (hash_loaded_script_entry): Likewise. (eq_loaded_script_entry): Likewise. (clear_section_scripts): Likewise. (collect_matching_scripts): Likewise. * auxv.c (auxv_inferior_data_cleanup): Likewise. (get_auxv_inferior_data): Likewise. * avr-tdep.c (avr_frame_unwind_cache): Likewise. * ax-general.c (do_free_agent_expr_cleanup): Likewise. * bfd-target.c (target_bfd_xfer_partial): Likewise. (target_bfd_xclose): Likewise. (target_bfd_get_section_table): Likewise. * bfin-tdep.c (bfin_frame_cache): Likewise. * block.c (find_block_in_blockvector): Likewise. (call_site_for_pc): Likewise. (block_find_non_opaque_type_preferred): Likewise. * break-catch-sig.c (signal_catchpoint_insert_location): Likewise. (signal_catchpoint_remove_location): Likewise. (signal_catchpoint_breakpoint_hit): Likewise. (signal_catchpoint_print_one): Likewise. (signal_catchpoint_print_mention): Likewise. (signal_catchpoint_print_recreate): Likewise. * break-catch-syscall.c (get_catch_syscall_inferior_data): Likewise. * breakpoint.c (do_cleanup_counted_command_line): Likewise. (bp_location_compare_addrs): Likewise. (get_first_locp_gte_addr): Likewise. (check_tracepoint_command): Likewise. (do_map_commands_command): Likewise. (get_breakpoint_objfile_data): Likewise. (free_breakpoint_probes): Likewise. (do_captured_breakpoint_query): Likewise. (compare_breakpoints): Likewise. (bp_location_compare): Likewise. (bpstat_remove_breakpoint_callback): Likewise. (do_delete_breakpoint_cleanup): Likewise. * bsd-uthread.c (bsd_uthread_set_supply_uthread): Likewise. (bsd_uthread_set_collect_uthread): Likewise. (bsd_uthread_activate): Likewise. (bsd_uthread_fetch_registers): Likewise. (bsd_uthread_store_registers): Likewise. * btrace.c (check_xml_btrace_version): Likewise. (parse_xml_btrace_block): Likewise. (parse_xml_btrace_pt_config_cpu): Likewise. (parse_xml_btrace_pt_raw): Likewise. (parse_xml_btrace_pt): Likewise. (parse_xml_btrace_conf_bts): Likewise. (parse_xml_btrace_conf_pt): Likewise. (do_btrace_data_cleanup): Likewise. * c-typeprint.c (find_typedef_for_canonicalize): Likewise. * charset.c (cleanup_iconv): Likewise. (do_cleanup_iterator): Likewise. * cli-out.c (cli_uiout_dtor): Likewise. (cli_table_begin): Likewise. (cli_table_body): Likewise. (cli_table_end): Likewise. (cli_table_header): Likewise. (cli_begin): Likewise. (cli_end): Likewise. (cli_field_int): Likewise. (cli_field_skip): Likewise. (cli_field_string): Likewise. (cli_field_fmt): Likewise. (cli_spaces): Likewise. (cli_text): Likewise. (cli_message): Likewise. (cli_wrap_hint): Likewise. (cli_flush): Likewise. (cli_redirect): Likewise. (out_field_fmt): Likewise. (field_separator): Likewise. (cli_out_set_stream): Likewise. * cli/cli-cmds.c (compare_symtabs): Likewise. * cli/cli-dump.c (call_dump_func): Likewise. (restore_section_callback): Likewise. * cli/cli-script.c (clear_hook_in_cleanup): Likewise. (do_restore_user_call_depth): Likewise. (do_free_command_lines_cleanup): Likewise. * coff-pe-read.c (get_section_vmas): Likewise. (pe_as16): Likewise. (pe_as32): Likewise. * coffread.c (coff_symfile_read): Likewise. * common/agent.c (agent_look_up_symbols): Likewise. * common/filestuff.c (do_close_cleanup): Likewise. * common/format.c (free_format_pieces_cleanup): Likewise. * common/vec.c (vec_o_reserve): Likewise. * compile/compile-c-support.c (print_one_macro): Likewise. * compile/compile-c-symbols.c (hash_symbol_error): Likewise. (eq_symbol_error): Likewise. (del_symbol_error): Likewise. (error_symbol_once): Likewise. (gcc_convert_symbol): Likewise. (gcc_symbol_address): Likewise. (hash_symname): Likewise. (eq_symname): Likewise. * compile/compile-c-types.c (hash_type_map_instance): Likewise. (eq_type_map_instance): Likewise. (insert_type): Likewise. (convert_type): Likewise. * compile/compile-object-load.c (munmap_listp_free_cleanup): Likewise. (setup_sections): Likewise. (link_hash_table_free): Likewise. (copy_sections): Likewise. * compile/compile-object-run.c (do_module_cleanup): Likewise. * compile/compile.c (compile_print_value): Likewise. (do_rmdir): Likewise. (cleanup_compile_instance): Likewise. (cleanup_unlink_file): Likewise. * completer.c (free_completion_tracker): Likewise. * corelow.c (add_to_spuid_list): Likewise. * cp-namespace.c (reset_directive_searched): Likewise. * cp-support.c (reset_directive_searched): Likewise. * cris-tdep.c (cris_sigtramp_frame_unwind_cache): Likewise. (cris_frame_unwind_cache): Likewise. * d-lang.c (builtin_d_type): Likewise. * d-namespace.c (reset_directive_searched): Likewise. * dbxread.c (dbx_free_symfile_info): Likewise. (do_free_bincl_list_cleanup): Likewise. * disasm.c (hash_dis_line_entry): Likewise. (eq_dis_line_entry): Likewise. (dis_asm_print_address): Likewise. (fprintf_disasm): Likewise. (do_ui_file_delete): Likewise. * doublest.c (convert_floatformat_to_doublest): Likewise. * dummy-frame.c (pop_dummy_frame_bpt): Likewise. (dummy_frame_prev_register): Likewise. (dummy_frame_this_id): Likewise. * dwarf2-frame-tailcall.c (cache_hash): Likewise. (cache_eq): Likewise. (cache_find): Likewise. (tailcall_frame_this_id): Likewise. (dwarf2_tailcall_prev_register_first): Likewise. (tailcall_frame_prev_register): Likewise. (tailcall_frame_dealloc_cache): Likewise. (tailcall_frame_prev_arch): Likewise. * dwarf2-frame.c (dwarf2_frame_state_free): Likewise. (dwarf2_frame_set_init_reg): Likewise. (dwarf2_frame_init_reg): Likewise. (dwarf2_frame_set_signal_frame_p): Likewise. (dwarf2_frame_signal_frame_p): Likewise. (dwarf2_frame_set_adjust_regnum): Likewise. (dwarf2_frame_adjust_regnum): Likewise. (clear_pointer_cleanup): Likewise. (dwarf2_frame_cache): Likewise. (find_cie): Likewise. (dwarf2_frame_find_fde): Likewise. * dwarf2expr.c (dwarf_expr_address_type): Likewise. (free_dwarf_expr_context_cleanup): Likewise. * dwarf2loc.c (locexpr_find_frame_base_location): Likewise. (locexpr_get_frame_base): Likewise. (loclist_find_frame_base_location): Likewise. (loclist_get_frame_base): Likewise. (dwarf_expr_dwarf_call): Likewise. (dwarf_expr_get_base_type): Likewise. (dwarf_expr_push_dwarf_reg_entry_value): Likewise. (dwarf_expr_get_obj_addr): Likewise. (entry_data_value_coerce_ref): Likewise. (entry_data_value_copy_closure): Likewise. (entry_data_value_free_closure): Likewise. (get_frame_address_in_block_wrapper): Likewise. (dwarf2_evaluate_property): Likewise. (dwarf2_compile_property_to_c): Likewise. (needs_frame_read_addr_from_reg): Likewise. (needs_frame_get_reg_value): Likewise. (needs_frame_frame_base): Likewise. (needs_frame_frame_cfa): Likewise. (needs_frame_tls_address): Likewise. (needs_frame_dwarf_call): Likewise. (needs_dwarf_reg_entry_value): Likewise. (get_ax_pc): Likewise. (locexpr_read_variable): Likewise. (locexpr_read_variable_at_entry): Likewise. (locexpr_read_needs_frame): Likewise. (locexpr_describe_location): Likewise. (locexpr_tracepoint_var_ref): Likewise. (locexpr_generate_c_location): Likewise. (loclist_read_variable): Likewise. (loclist_read_variable_at_entry): Likewise. (loclist_describe_location): Likewise. (loclist_tracepoint_var_ref): Likewise. (loclist_generate_c_location): Likewise. * dwarf2read.c (line_header_hash_voidp): Likewise. (line_header_eq_voidp): Likewise. (dwarf2_has_info): Likewise. (dwarf2_get_section_info): Likewise. (locate_dwz_sections): Likewise. (hash_file_name_entry): Likewise. (eq_file_name_entry): Likewise. (delete_file_name_entry): Likewise. (dw2_setup): Likewise. (dw2_get_file_names_reader): Likewise. (dw2_find_pc_sect_compunit_symtab): Likewise. (hash_signatured_type): Likewise. (eq_signatured_type): Likewise. (add_signatured_type_cu_to_table): Likewise. (create_debug_types_hash_table): Likewise. (lookup_dwo_signatured_type): Likewise. (lookup_dwp_signatured_type): Likewise. (lookup_signatured_type): Likewise. (hash_type_unit_group): Likewise. (eq_type_unit_group): Likewise. (get_type_unit_group): Likewise. (process_psymtab_comp_unit_reader): Likewise. (sort_tu_by_abbrev_offset): Likewise. (process_skeletonless_type_unit): Likewise. (psymtabs_addrmap_cleanup): Likewise. (dwarf2_read_symtab): Likewise. (psymtab_to_symtab_1): Likewise. (die_hash): Likewise. (die_eq): Likewise. (load_full_comp_unit_reader): Likewise. (reset_die_in_process): Likewise. (free_cu_line_header): Likewise. (handle_DW_AT_stmt_list): Likewise. (hash_dwo_file): Likewise. (eq_dwo_file): Likewise. (hash_dwo_unit): Likewise. (eq_dwo_unit): Likewise. (create_dwo_cu_reader): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (lookup_dwo_unit_in_dwp): Likewise. (dwarf2_locate_dwo_sections): Likewise. (dwarf2_locate_common_dwp_sections): Likewise. (dwarf2_locate_v2_dwp_sections): Likewise. (hash_dwp_loaded_cutus): Likewise. (eq_dwp_loaded_cutus): Likewise. (lookup_dwo_cutu): Likewise. (abbrev_table_free_cleanup): Likewise. (dwarf2_free_abbrev_table): Likewise. (find_partial_die_in_comp_unit): Likewise. (free_line_header_voidp): Likewise. (follow_die_offset): Likewise. (follow_die_sig_1): Likewise. (free_heap_comp_unit): Likewise. (free_stack_comp_unit): Likewise. (dwarf2_free_objfile): Likewise. (per_cu_offset_and_type_hash): Likewise. (per_cu_offset_and_type_eq): Likewise. (get_die_type_at_offset): Likewise. (partial_die_hash): Likewise. (partial_die_eq): Likewise. (dwarf2_per_objfile_free): Likewise. (hash_strtab_entry): Likewise. (eq_strtab_entry): Likewise. (add_string): Likewise. (hash_symtab_entry): Likewise. (eq_symtab_entry): Likewise. (delete_symtab_entry): Likewise. (cleanup_mapped_symtab): Likewise. (add_indices_to_cpool): Likewise. (hash_psymtab_cu_index): Likewise. (eq_psymtab_cu_index): Likewise. (add_address_entry_worker): Likewise. (unlink_if_set): Likewise. (write_one_signatured_type): Likewise. (save_gdb_index_command): Likewise. * elfread.c (elf_symtab_read): Likewise. (elf_gnu_ifunc_cache_hash): Likewise. (elf_gnu_ifunc_cache_eq): Likewise. (elf_gnu_ifunc_record_cache): Likewise. (elf_gnu_ifunc_resolve_by_cache): Likewise. (elf_get_probes): Likewise. (probe_key_free): Likewise. * f-lang.c (builtin_f_type): Likewise. * frame-base.c (frame_base_append_sniffer): Likewise. (frame_base_set_default): Likewise. (frame_base_find_by_frame): Likewise. * frame-unwind.c (frame_unwind_prepend_unwinder): Likewise. (frame_unwind_append_unwinder): Likewise. (frame_unwind_find_by_frame): Likewise. * frame.c (frame_addr_hash): Likewise. (frame_addr_hash_eq): Likewise. (frame_stash_find): Likewise. (do_frame_register_read): Likewise. (unwind_to_current_frame): Likewise. (frame_cleanup_after_sniffer): Likewise. * frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise. * frv-tdep.c (frv_frame_unwind_cache): Likewise. * ft32-tdep.c (ft32_frame_cache): Likewise. * gcore.c (do_bfd_delete_cleanup): Likewise. (gcore_create_callback): Likewise. * gdb_bfd.c (hash_bfd): Likewise. (eq_bfd): Likewise. (gdb_bfd_open): Likewise. (free_one_bfd_section): Likewise. (gdb_bfd_ref): Likewise. (gdb_bfd_unref): Likewise. (get_section_descriptor): Likewise. (gdb_bfd_map_section): Likewise. (gdb_bfd_crc): Likewise. (gdb_bfd_mark_parent): Likewise. (gdb_bfd_record_inclusion): Likewise. (gdb_bfd_requires_relocations): Likewise. (print_one_bfd): Likewise. * gdbtypes.c (type_pair_hash): Likewise. (type_pair_eq): Likewise. (builtin_type): Likewise. (objfile_type): Likewise. * gnu-v3-abi.c (vtable_ptrdiff_type): Likewise. (vtable_address_point_offset): Likewise. (gnuv3_get_vtable): Likewise. (hash_value_and_voffset): Likewise. (eq_value_and_voffset): Likewise. (compare_value_and_voffset): Likewise. (compute_vtable_size): Likewise. (gnuv3_get_typeid_type): Likewise. * go-lang.c (builtin_go_type): Likewise. * guile/scm-block.c (bkscm_hash_block_smob): Likewise. (bkscm_eq_block_smob): Likewise. (bkscm_objfile_block_map): Likewise. (bkscm_del_objfile_blocks): Likewise. * guile/scm-breakpoint.c (bpscm_build_bp_list): Likewise. * guile/scm-disasm.c (gdbscm_disasm_read_memory_worker): Likewise. (gdbscm_disasm_print_address): Likewise. * guile/scm-frame.c (frscm_hash_frame_smob): Likewise. (frscm_eq_frame_smob): Likewise. (frscm_inferior_frame_map): Likewise. (frscm_del_inferior_frames): Likewise. * guile/scm-gsmob.c (gdbscm_add_objfile_ref): Likewise. * guile/scm-objfile.c (ofscm_handle_objfile_deleted): Likewise. (ofscm_objfile_smob_from_objfile): Likewise. * guile/scm-ports.c (ioscm_write): Likewise. (ioscm_file_port_delete): Likewise. (ioscm_file_port_rewind): Likewise. (ioscm_file_port_put): Likewise. (ioscm_file_port_write): Likewise. * guile/scm-progspace.c (psscm_handle_pspace_deleted): Likewise. (psscm_pspace_smob_from_pspace): Likewise. * guile/scm-safe-call.c (scscm_recording_pre_unwind_handler): Likewise. (scscm_recording_unwind_handler): Likewise. (gdbscm_with_catch): Likewise. (scscm_call_0_body): Likewise. (scscm_call_1_body): Likewise. (scscm_call_2_body): Likewise. (scscm_call_3_body): Likewise. (scscm_call_4_body): Likewise. (scscm_apply_1_body): Likewise. (scscm_eval_scheme_string): Likewise. (gdbscm_safe_eval_string): Likewise. (scscm_source_scheme_script): Likewise. (gdbscm_safe_source_script): Likewise. * guile/scm-string.c (gdbscm_call_scm_to_stringn): Likewise. (gdbscm_call_scm_from_stringn): Likewise. * guile/scm-symbol.c (syscm_hash_symbol_smob): Likewise. (syscm_eq_symbol_smob): Likewise. (syscm_get_symbol_map): Likewise. (syscm_del_objfile_symbols): Likewise. * guile/scm-symtab.c (stscm_hash_symtab_smob): Likewise. (stscm_eq_symtab_smob): Likewise. (stscm_objfile_symtab_map): Likewise. (stscm_del_objfile_symtabs): Likewise. * guile/scm-type.c (tyscm_hash_type_smob): Likewise. (tyscm_eq_type_smob): Likewise. (tyscm_type_map): Likewise. (tyscm_copy_type_recursive): Likewise. (save_objfile_types): Likewise. * guile/scm-utils.c (extract_arg): Likewise. * h8300-tdep.c (h8300_frame_cache): Likewise. * hppa-linux-tdep.c (hppa_linux_sigtramp_frame_unwind_cache): Likewise. * hppa-tdep.c (compare_unwind_entries): Likewise. (find_unwind_entry): Likewise. (hppa_frame_cache): Likewise. (hppa_stub_frame_unwind_cache): Likewise. * hppanbsd-tdep.c (hppanbsd_supply_gregset): Likewise. * hppaobsd-tdep.c (hppaobsd_supply_gregset): Likewise. (hppaobsd_supply_fpregset): Likewise. * i386-cygwin-tdep.c (core_process_module_section): Likewise. * i386-linux-tdep.c (i386_linux_init_abi): Likewise. * i386-tdep.c (i386_frame_cache): Likewise. (i386_epilogue_frame_cache): Likewise. (i386_sigtramp_frame_cache): Likewise. (i386_supply_gregset): Likewise. (i386_collect_gregset): Likewise. (i386_gdbarch_init): Likewise. * i386obsd-tdep.c (i386obsd_aout_supply_regset): Likewise. (i386obsd_trapframe_cache): Likewise. * i387-tdep.c (i387_supply_fsave): Likewise. (i387_collect_fsave): Likewise. (i387_supply_fxsave): Likewise. (i387_collect_fxsave): Likewise. (i387_supply_xsave): Likewise. (i387_collect_xsave): Likewise. * ia64-tdep.c (ia64_frame_cache): Likewise. (ia64_sigtramp_frame_cache): Likewise. * infcmd.c (attach_command_continuation): Likewise. (attach_command_continuation_free_args): Likewise. * inferior.c (restore_inferior): Likewise. (delete_thread_of_inferior): Likewise. * inflow.c (inflow_inferior_data_cleanup): Likewise. (get_inflow_inferior_data): Likewise. (inflow_inferior_exit): Likewise. * infrun.c (displaced_step_clear_cleanup): Likewise. (restore_current_uiout_cleanup): Likewise. (release_stop_context_cleanup): Likewise. (do_restore_infcall_suspend_state_cleanup): Likewise. (do_restore_infcall_control_state_cleanup): Likewise. (restore_inferior_ptid): Likewise. * inline-frame.c (block_starting_point_at): Likewise. * iq2000-tdep.c (iq2000_frame_cache): Likewise. * jit.c (get_jit_objfile_data): Likewise. (get_jit_program_space_data): Likewise. (jit_object_close_impl): Likewise. (jit_find_objf_with_entry_addr): Likewise. (jit_breakpoint_deleted): Likewise. (jit_unwind_reg_set_impl): Likewise. (jit_unwind_reg_get_impl): Likewise. (jit_dealloc_cache): Likewise. (jit_frame_sniffer): Likewise. (jit_frame_prev_register): Likewise. (jit_prepend_unwinder): Likewise. (jit_inferior_exit_hook): Likewise. (free_objfile_data): Likewise. * jv-lang.c (jv_per_objfile_free): Likewise. (get_dynamics_objfile): Likewise. (get_java_class_symtab): Likewise. (builtin_java_type): Likewise. * language.c (language_string_char_type): Likewise. (language_bool_type): Likewise. (language_lookup_primitive_type): Likewise. (language_lookup_primitive_type_as_symbol): Likewise. * linespec.c (hash_address_entry): Likewise. (eq_address_entry): Likewise. (iterate_inline_only): Likewise. (iterate_name_matcher): Likewise. (decode_line_2_compare_items): Likewise. (collect_one_symbol): Likewise. (compare_symbols): Likewise. (compare_msymbols): Likewise. (add_symtabs_to_list): Likewise. (collect_symbols): Likewise. (compare_msyms): Likewise. (add_minsym): Likewise. (cleanup_linespec_result): Likewise. * linux-fork.c (inferior_call_waitpid_cleanup): Likewise. * linux-nat.c (delete_lwp_cleanup): Likewise. (count_events_callback): Likewise. (select_event_lwp_callback): Likewise. (resume_stopped_resumed_lwps): Likewise. * linux-tdep.c (get_linux_gdbarch_data): Likewise. (invalidate_linux_cache_inf): Likewise. (get_linux_inferior_data): Likewise. (linux_find_memory_regions_thunk): Likewise. (linux_make_mappings_callback): Likewise. (linux_corefile_thread_callback): Likewise. (find_mapping_size): Likewise. * linux-thread-db.c (find_new_threads_callback): Likewise. * lm32-tdep.c (lm32_frame_cache): Likewise. * m2-lang.c (builtin_m2_type): Likewise. * m32c-tdep.c (m32c_analyze_frame_prologue): Likewise. * m32r-linux-tdep.c (m32r_linux_sigtramp_frame_cache): Likewise. (m32r_linux_supply_gregset): Likewise. (m32r_linux_collect_gregset): Likewise. * m32r-tdep.c (m32r_frame_unwind_cache): Likewise. * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. * m68k-tdep.c (m68k_frame_cache): Likewise. * m68kbsd-tdep.c (m68kbsd_supply_fpregset): Likewise. (m68kbsd_supply_gregset): Likewise. * m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise. * m88k-tdep.c (m88k_frame_cache): Likewise. (m88k_supply_gregset): Likewise. gdb/gdbserver/ChangeLog: * dll.c (match_dll): Add cast(s). (unloaded_dll): Likewise. * linux-low.c (second_thread_of_pid_p): Likewise. (delete_lwp_callback): Likewise. (count_events_callback): Likewise. (select_event_lwp_callback): Likewise. (linux_set_resume_request): Likewise. * server.c (accumulate_file_name_length): Likewise. (emit_dll_description): Likewise. (handle_qxfer_threads_worker): Likewise. (visit_actioned_threads): Likewise. * thread-db.c (any_thread_of): Likewise. * tracepoint.c (same_process_p): Likewise. (match_blocktype): Likewise. (build_traceframe_info_xml): Likewise. gdb/testsuite/ChangeLog: * gdb.gdb/selftest.exp (do_steps_and_nexts): Adjust expected source line.	2015-09-25 14:08:07 -04:00
Simon Marchi	224c3ddb89	Add casts to memory allocation related calls ... Most allocation functions (if not all) return a void* pointing to the allocated memory. In C++, we need to add an explicit cast when assigning the result to a pointer to another type (which is the case more often than not). The content of this patch is taken from Pedro's branch, from commit "(mostly) auto-generated patch to insert casts needed for C++". I validated that the changes make sense and manually reflowed the code to make it respect the coding style. I also found multiple places where I could use XNEW/XNEWVEC/XRESIZEVEC/etc. Thanks a lot to whoever did that automated script to insert casts, doing it completely by hand would have taken a ridiculous amount of time. Only files built on x86 with --enable-targets=all are modified. This means that all other -nat.c files are untouched and will have to be dealt with later by using appropiate compilers. Or maybe we can try to build them with a regular g++ just to know where to add casts, I don't know. I built-tested this with --enable-targets=all and reg-tested. Here's the changelog entry, which was not too bad to make despite the size, thanks to David Malcom's script. I fixed some bits by hand, but there might be some wrong parts left (hopefully not). gdb/ChangeLog: * aarch64-linux-tdep.c (aarch64_stap_parse_special_token): Add cast to allocation result assignment. * ada-exp.y (write_object_renaming): Likewise. (write_ambiguous_var): Likewise. (ada_nget_field_index): Likewise. (write_var_or_type): Likewise. * ada-lang.c (ada_decode_symbol): Likewise. (ada_value_assign): Likewise. (value_pointer): Likewise. (cache_symbol): Likewise. (add_nonlocal_symbols): Likewise. (ada_name_for_lookup): Likewise. (symbol_completion_add): Likewise. (ada_to_fixed_type_1): Likewise. (ada_get_next_arg): Likewise. (defns_collected): Likewise. * ada-lex.l (processId): Likewise. (processString): Likewise. * ada-tasks.c (read_known_tasks_array): Likewise. (read_known_tasks_list): Likewise. * ada-typeprint.c (decoded_type_name): Likewise. * addrmap.c (addrmap_mutable_create_fixed): Likewise. * amd64-tdep.c (amd64_push_arguments): Likewise. (amd64_displaced_step_copy_insn): Likewise. (amd64_classify_insn_at): Likewise. (amd64_relocate_instruction): Likewise. * amd64obsd-tdep.c (amd64obsd_sigtramp_p): Likewise. * arch-utils.c (simple_displaced_step_copy_insn): Likewise. (initialize_current_architecture): Likewise. * arm-linux-tdep.c (arm_stap_parse_special_token): Likewise. * arm-symbian-tdep.c (arm_symbian_osabi_sniffer): Likewise. * arm-tdep.c (arm_exidx_new_objfile): Likewise. (arm_push_dummy_call): Likewise. (extend_buffer_earlier): Likewise. (arm_adjust_breakpoint_address): Likewise. (arm_skip_stub): Likewise. * auto-load.c (filename_is_in_pattern): Likewise. (maybe_add_script_file): Likewise. (maybe_add_script_text): Likewise. (auto_load_objfile_script_1): Likewise. * auxv.c (ld_so_xfer_auxv): Likewise. * ax-general.c (new_agent_expr): Likewise. (grow_expr): Likewise. (ax_reg_mask): Likewise. * bcache.c (bcache_full): Likewise. * breakpoint.c (program_breakpoint_here_p): Likewise. * btrace.c (parse_xml_raw): Likewise. * build-id.c (build_id_to_debug_bfd): Likewise. * buildsym.c (end_symtab_with_blockvector): Likewise. * c-exp.y (string_exp): Likewise. (qualified_name): Likewise. (write_destructor_name): Likewise. (operator_stoken): Likewise. (parse_number): Likewise. (scan_macro_expansion): Likewise. (yylex): Likewise. (c_print_token): Likewise. * c-lang.c (c_get_string): Likewise. (emit_numeric_character): Likewise. * charset.c (wchar_iterate): Likewise. * cli/cli-cmds.c (complete_command): Likewise. (make_command): Likewise. * cli/cli-dump.c (restore_section_callback): Likewise. (restore_binary_file): Likewise. * cli/cli-interp.c (cli_interpreter_exec): Likewise. * cli/cli-script.c (execute_control_command): Likewise. * cli/cli-setshow.c (do_set_command): Likewise. * coff-pe-read.c (add_pe_forwarded_sym): Likewise. (read_pe_exported_syms): Likewise. * coffread.c (coff_read_struct_type): Likewise. (coff_read_enum_type): Likewise. * common/btrace-common.c (btrace_data_append): Likewise. * common/buffer.c (buffer_grow): Likewise. * common/filestuff.c (gdb_fopen_cloexec): Likewise. * common/format.c (parse_format_string): Likewise. * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): Likewise. * common/xml-utils.c (xml_escape_text): Likewise. * compile/compile-object-load.c (copy_sections): Likewise. (compile_object_load): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * completer.c (filename_completer): Likewise. * corefile.c (read_memory_typed_address): Likewise. (write_memory_unsigned_integer): Likewise. (write_memory_signed_integer): Likewise. (complete_set_gnutarget): Likewise. * corelow.c (get_core_register_section): Likewise. * cp-name-parser.y (d_grab): Likewise. (allocate_info): Likewise. (cp_new_demangle_parse_info): Likewise. * cp-namespace.c (cp_scan_for_anonymous_namespaces): Likewise. (cp_lookup_symbol_in_namespace): Likewise. (lookup_namespace_scope): Likewise. (find_symbol_in_baseclass): Likewise. (cp_lookup_nested_symbol): Likewise. (cp_lookup_transparent_type_loop): Likewise. * cp-support.c (copy_string_to_obstack): Likewise. (make_symbol_overload_list): Likewise. (make_symbol_overload_list_namespace): Likewise. (make_symbol_overload_list_adl_namespace): Likewise. (first_component_command): Likewise. * cp-valprint.c (cp_print_value): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * d-exp.y (StringExp): Likewise. * d-namespace.c (d_lookup_symbol_in_module): Likewise. (lookup_module_scope): Likewise. (find_symbol_in_baseclass): Likewise. (d_lookup_nested_symbol): Likewise. * dbxread.c (find_stab_function_addr): Likewise. (read_dbx_symtab): Likewise. (dbx_end_psymtab): Likewise. (cp_set_block_scope): Likewise. * dcache.c (dcache_alloc): Likewise. * demangle.c (_initialize_demangler): Likewise. * dicos-tdep.c (dicos_load_module_p): Likewise. * dictionary.c (dict_create_hashed_expandable): Likewise. (dict_create_linear_expandable): Likewise. (expand_hashtable): Likewise. (add_symbol_linear_expandable): Likewise. * dwarf2-frame.c (add_cie): Likewise. (add_fde): Likewise. (dwarf2_build_frame_info): Likewise. * dwarf2expr.c (dwarf_expr_grow_stack): Likewise. (dwarf_expr_fetch_address): Likewise. (add_piece): Likewise. (execute_stack_op): Likewise. * dwarf2loc.c (chain_candidate): Likewise. (dwarf_entry_parameter_to_value): Likewise. (read_pieced_value): Likewise. (write_pieced_value): Likewise. * dwarf2read.c (dwarf2_read_section): Likewise. (add_type_unit): Likewise. (read_comp_units_from_section): Likewise. (fixup_go_packaging): Likewise. (dwarf2_compute_name): Likewise. (dwarf2_physname): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (read_func_scope): Likewise. (read_call_site_scope): Likewise. (dwarf2_attach_fields_to_type): Likewise. (process_structure_scope): Likewise. (mark_common_block_symbol_computed): Likewise. (read_common_block): Likewise. (abbrev_table_read_table): Likewise. (guess_partial_die_structure_name): Likewise. (fixup_partial_die): Likewise. (add_file_name): Likewise. (dwarf2_const_value_data): Likewise. (dwarf2_const_value_attr): Likewise. (build_error_marker_type): Likewise. (guess_full_die_structure_name): Likewise. (anonymous_struct_prefix): Likewise. (typename_concat): Likewise. (dwarf2_canonicalize_name): Likewise. (dwarf2_name): Likewise. (write_constant_as_bytes): Likewise. (dwarf2_fetch_constant_bytes): Likewise. (copy_string): Likewise. (parse_macro_definition): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_rel_plt_read): Likewise. (elf_gnu_ifunc_resolve_by_cache): Likewise. (elf_gnu_ifunc_resolve_by_got): Likewise. (elf_read_minimal_symbols): Likewise. (elf_gnu_ifunc_record_cache): Likewise. * event-top.c (top_level_prompt): Likewise. (command_line_handler): Likewise. * exec.c (resize_section_table): Likewise. * expprint.c (print_subexp_standard): Likewise. * fbsd-tdep.c (fbsd_collect_regset_section_cb): Likewise. * findcmd.c (parse_find_args): Likewise. * findvar.c (address_from_register): Likewise. * frame.c (get_prev_frame_always): Likewise. * gdb_bfd.c (gdb_bfd_ref): Likewise. (get_section_descriptor): Likewise. * gdb_obstack.c (obconcat): Likewise. (obstack_strdup): Likewise. * gdbtypes.c (lookup_function_type_with_arguments): Likewise. (create_set_type): Likewise. (lookup_unsigned_typename): Likewise. (lookup_signed_typename): Likewise. (resolve_dynamic_union): Likewise. (resolve_dynamic_struct): Likewise. (add_dyn_prop): Likewise. (copy_dynamic_prop_list): Likewise. (arch_flags_type): Likewise. (append_composite_type_field_raw): Likewise. * gdbtypes.h (INIT_FUNC_SPECIFIC): Likewise. * gnu-v3-abi.c (gnuv3_rtti_type): Likewise. * go-exp.y (string_exp): Likewise. * go-lang.c (go_demangle): Likewise. * guile/guile.c (compute_scheme_string): Likewise. * guile/scm-cmd.c (gdbscm_parse_command_name): Likewise. (gdbscm_canonicalize_command_name): Likewise. * guile/scm-ports.c (ioscm_init_stdio_buffers): Likewise. (ioscm_init_memory_port): Likewise. (ioscm_reinit_memory_port): Likewise. * guile/scm-utils.c (gdbscm_gc_xstrdup): Likewise. (gdbscm_gc_dup_argv): Likewise. * h8300-tdep.c (h8300_push_dummy_call): Likewise. * hppa-tdep.c (internalize_unwinds): Likewise. (read_unwind_info): Likewise. * i386-cygwin-tdep.c (core_process_module_section): Likewise. (windows_core_xfer_shared_libraries): Likewise. * i386-tdep.c (i386_displaced_step_copy_insn): Likewise. (i386_stap_parse_special_token_triplet): Likewise. (i386_stap_parse_special_token_three_arg_disp): Likewise. * i386obsd-tdep.c (i386obsd_sigtramp_p): Likewise. * inf-child.c (inf_child_fileio_readlink): Likewise. * inf-ptrace.c (inf_ptrace_fetch_register): Likewise. (inf_ptrace_store_register): Likewise. * infrun.c (follow_exec): Likewise. (displaced_step_prepare_throw): Likewise. (save_stop_context): Likewise. (save_infcall_suspend_state): Likewise. * jit.c (jit_read_descriptor): Likewise. (jit_read_code_entry): Likewise. (jit_symtab_line_mapping_add_impl): Likewise. (finalize_symtab): Likewise. (jit_unwind_reg_get_impl): Likewise. * jv-exp.y (QualifiedName): Likewise. * jv-lang.c (get_java_utf8_name): Likewise. (type_from_class): Likewise. (java_demangle_type_signature): Likewise. (java_class_name_from_physname): Likewise. * jv-typeprint.c (java_type_print_base): Likewise. * jv-valprint.c (java_value_print): Likewise. * language.c (add_language): Likewise. * linespec.c (add_sal_to_sals_basic): Likewise. (add_sal_to_sals): Likewise. (decode_objc): Likewise. (find_linespec_symbols): Likewise. * linux-fork.c (fork_save_infrun_state): Likewise. * linux-nat.c (linux_nat_detach): Likewise. (linux_nat_fileio_readlink): Likewise. * linux-record.c (record_linux_sockaddr): Likewise. (record_linux_msghdr): Likewise. (Do): Likewise. * linux-tdep.c (linux_core_info_proc_mappings): Likewise. (linux_collect_regset_section_cb): Likewise. (linux_get_siginfo_data): Likewise. * linux-thread-db.c (try_thread_db_load_from_pdir_1): Likewise. (try_thread_db_load_from_dir): Likewise. (thread_db_load_search): Likewise. (info_auto_load_libthread_db): Likewise. * m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise. (m32c_m16c_pointer_to_address): Likewise. * m68hc11-tdep.c (m68hc11_pseudo_register_write): Likewise. * m68k-tdep.c (m68k_get_longjmp_target): Likewise. * machoread.c (macho_check_dsym): Likewise. * macroexp.c (resize_buffer): Likewise. (gather_arguments): Likewise. (maybe_expand): Likewise. * macrotab.c (new_macro_key): Likewise. (new_source_file): Likewise. (new_macro_definition): Likewise. * mdebugread.c (parse_symbol): Likewise. (parse_type): Likewise. (parse_partial_symbols): Likewise. (psymtab_to_symtab_1): Likewise. * mem-break.c (default_memory_insert_breakpoint): Likewise. * mi/mi-cmd-break.c (mi_argv_to_format): Likewise. * mi/mi-main.c (mi_cmd_data_read_memory): Likewise. (mi_cmd_data_read_memory_bytes): Likewise. (mi_cmd_data_write_memory_bytes): Likewise. (mi_cmd_trace_frame_collected): Likewise. * mi/mi-parse.c (mi_parse_argv): Likewise. (mi_parse): Likewise. * minidebug.c (lzma_open): Likewise. (lzma_pread): Likewise. * mips-tdep.c (mips_read_fp_register_single): Likewise. (mips_print_fp_register): Likewise. * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Likewise. * mipsread.c (read_alphacoff_dynamic_symtab): Likewise. * mt-tdep.c (mt_register_name): Likewise. (mt_registers_info): Likewise. (mt_push_dummy_call): Likewise. * namespace.c (add_using_directive): Likewise. * nat/linux-btrace.c (perf_event_read): Likewise. (linux_enable_bts): Likewise. * nat/linux-osdata.c (linux_common_core_of_thread): Likewise. * nat/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Likewise. * nto-tdep.c (nto_find_and_open_solib): Likewise. (nto_parse_redirection): Likewise. * objc-lang.c (objc_demangle): Likewise. (find_methods): Likewise. * objfiles.c (get_objfile_bfd_data): Likewise. (set_objfile_main_name): Likewise. (allocate_objfile): Likewise. (objfile_relocate): Likewise. (update_section_map): Likewise. * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Likewise. * p-exp.y (exp): Likewise. (yylex): Likewise. * p-valprint.c (pascal_object_print_value): Likewise. * parse.c (initialize_expout): Likewise. (mark_completion_tag): Likewise. (copy_name): Likewise. (parse_float): Likewise. (type_stack_reserve): Likewise. * ppc-linux-tdep.c (ppc_stap_parse_special_token): Likewise. (ppu2spu_prev_register): Likewise. * ppc-ravenscar-thread.c (supply_register_at_address): Likewise. * printcmd.c (printf_wide_c_string): Likewise. (printf_pointer): Likewise. * probe.c (parse_probes): Likewise. * python/py-cmd.c (gdbpy_parse_command_name): Likewise. (cmdpy_init): Likewise. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Likewise. * python/py-symtab.c (set_sal): Likewise. * python/py-unwind.c (pyuw_sniffer): Likewise. * python/python.c (python_interactive_command): Likewise. (compute_python_string): Likewise. * ravenscar-thread.c (get_running_thread_id): Likewise. * record-full.c (record_full_exec_insn): Likewise. (record_full_core_open_1): Likewise. * regcache.c (regcache_raw_read_signed): Likewise. (regcache_raw_read_unsigned): Likewise. (regcache_cooked_read_signed): Likewise. (regcache_cooked_read_unsigned): Likewise. * remote-fileio.c (remote_fileio_func_open): Likewise. (remote_fileio_func_rename): Likewise. (remote_fileio_func_unlink): Likewise. (remote_fileio_func_stat): Likewise. (remote_fileio_func_system): Likewise. * remote-mips.c (mips_xfer_memory): Likewise. (mips_load_srec): Likewise. (pmon_end_download): Likewise. * remote.c (new_remote_state): Likewise. (map_regcache_remote_table): Likewise. (remote_register_number_and_offset): Likewise. (init_remote_state): Likewise. (get_memory_packet_size): Likewise. (remote_pass_signals): Likewise. (remote_program_signals): Likewise. (remote_start_remote): Likewise. (remote_check_symbols): Likewise. (remote_query_supported): Likewise. (extended_remote_attach): Likewise. (process_g_packet): Likewise. (store_registers_using_G): Likewise. (putpkt_binary): Likewise. (read_frame): Likewise. (compare_sections_command): Likewise. (remote_hostio_pread): Likewise. (remote_hostio_readlink): Likewise. (remote_file_put): Likewise. (remote_file_get): Likewise. (remote_pid_to_exec_file): Likewise. (_initialize_remote): Likewise. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. (rs6000_aix_core_xfer_shared_libraries_aix): Likewise. * rs6000-tdep.c (ppc_displaced_step_copy_insn): Likewise. (bfd_uses_spe_extensions): Likewise. * s390-linux-tdep.c (s390_displaced_step_copy_insn): Likewise. * score-tdep.c (score7_malloc_and_get_memblock): Likewise. * solib-dsbt.c (decode_loadmap): Likewise. (fetch_loadmap): Likewise. (scan_dyntag): Likewise. (enable_break): Likewise. (dsbt_relocate_main_executable): Likewise. * solib-frv.c (fetch_loadmap): Likewise. (enable_break2): Likewise. (frv_relocate_main_executable): Likewise. * solib-spu.c (spu_relocate_main_executable): Likewise. (spu_bfd_open): Likewise. * solib-svr4.c (lm_info_read): Likewise. (read_program_header): Likewise. (find_program_interpreter): Likewise. (scan_dyntag): Likewise. (elf_locate_base): Likewise. (open_symbol_file_object): Likewise. (read_program_headers_from_bfd): Likewise. (svr4_relocate_main_executable): Likewise. * solib-target.c (solib_target_relocate_section_addresses): Likewise. * solib.c (solib_find_1): Likewise. (exec_file_find): Likewise. (solib_find): Likewise. * source.c (openp): Likewise. (print_source_lines_base): Likewise. (forward_search_command): Likewise. * sparc-ravenscar-thread.c (supply_register_at_address): Likewise. * spu-tdep.c (spu2ppu_prev_register): Likewise. (spu_get_overlay_table): Likewise. * stabsread.c (patch_block_stabs): Likewise. (define_symbol): Likewise. (again:): Likewise. (read_member_functions): Likewise. (read_one_struct_field): Likewise. (read_enum_type): Likewise. (common_block_start): Likewise. * stack.c (read_frame_arg): Likewise. (backtrace_command): Likewise. * stap-probe.c (stap_parse_register_operand): Likewise. * symfile.c (syms_from_objfile_1): Likewise. (find_separate_debug_file): Likewise. (load_command): Likewise. (load_progress): Likewise. (load_section_callback): Likewise. (reread_symbols): Likewise. (add_filename_language): Likewise. (allocate_compunit_symtab): Likewise. (read_target_long_array): Likewise. (simple_read_overlay_table): Likewise. * symtab.c (symbol_set_names): Likewise. (resize_symbol_cache): Likewise. (rbreak_command): Likewise. (completion_list_add_name): Likewise. (completion_list_objc_symbol): Likewise. (add_filename_to_list): Likewise. * target-descriptions.c (maint_print_c_tdesc_cmd): Likewise. * target-memory.c (target_write_memory_blocks): Likewise. * target.c (target_read_string): Likewise. (read_whatever_is_readable): Likewise. (target_read_alloc_1): Likewise. (simple_search_memory): Likewise. (target_fileio_read_alloc_1): Likewise. * tilegx-tdep.c (tilegx_push_dummy_call): Likewise. * top.c (command_line_input): Likewise. * tracefile-tfile.c (tfile_fetch_registers): Likewise. * tracefile.c (tracefile_fetch_registers): Likewise. * tracepoint.c (add_memrange): Likewise. (init_collection_list): Likewise. (add_aexpr): Likewise. (trace_dump_actions): Likewise. (parse_trace_status): Likewise. (parse_tracepoint_definition): Likewise. (parse_tsv_definition): Likewise. (parse_static_tracepoint_marker_definition): Likewise. * tui/tui-file.c (tui_sfileopen): Likewise. (tui_file_adjust_strbuf): Likewise. * tui/tui-io.c (tui_expand_tabs): Likewise. * tui/tui-source.c (tui_set_source_content): Likewise. * typeprint.c (find_global_typedef): Likewise. * ui-file.c (do_ui_file_xstrdup): Likewise. (ui_file_obsavestring): Likewise. (mem_file_write): Likewise. * utils.c (make_hex_string): Likewise. (get_regcomp_error): Likewise. (puts_filtered_tabular): Likewise. (gdb_realpath_keepfile): Likewise. (ldirname): Likewise. (gdb_bfd_errmsg): Likewise. (substitute_path_component): Likewise. * valops.c (search_struct_method): Likewise. (find_oload_champ_namespace_loop): Likewise. * valprint.c (print_decimal_chars): Likewise. (read_string): Likewise. (generic_emit_char): Likewise. * varobj.c (varobj_delete): Likewise. (varobj_value_get_print_value): Likewise. * vaxobsd-tdep.c (vaxobsd_sigtramp_sniffer): Likewise. * windows-tdep.c (display_one_tib): Likewise. * xcoffread.c (read_xcoff_symtab): Likewise. (process_xcoff_symbol): Likewise. (swap_sym): Likewise. (scan_xcoff_symtab): Likewise. (xcoff_initial_scan): Likewise. * xml-support.c (gdb_xml_end_element): Likewise. (xml_process_xincludes): Likewise. (xml_fetch_content_from_file): Likewise. * xml-syscall.c (xml_list_of_syscalls): Likewise. * xstormy16-tdep.c (xstormy16_push_dummy_call): Likewise. gdb/gdbserver/ChangeLog: * ax.c (gdb_parse_agent_expr): Add cast to allocation result assignment. (gdb_unparse_agent_expr): Likewise. * hostio.c (require_data): Likewise. (handle_pread): Likewise. * linux-low.c (disable_regset): Likewise. (fetch_register): Likewise. (store_register): Likewise. (get_dynamic): Likewise. (linux_qxfer_libraries_svr4): Likewise. * mem-break.c (delete_fast_tracepoint_jump): Likewise. (set_fast_tracepoint_jump): Likewise. (uninsert_fast_tracepoint_jumps_at): Likewise. (reinsert_fast_tracepoint_jumps_at): Likewise. (validate_inserted_breakpoint): Likewise. (clone_agent_expr): Likewise. * regcache.c (init_register_cache): Likewise. * remote-utils.c (putpkt_binary_1): Likewise. (decode_M_packet): Likewise. (decode_X_packet): Likewise. (look_up_one_symbol): Likewise. (relocate_instruction): Likewise. (monitor_output): Likewise. * server.c (handle_search_memory): Likewise. (handle_qxfer_exec_file): Likewise. (handle_qxfer_libraries): Likewise. (handle_qxfer): Likewise. (handle_query): Likewise. (handle_v_cont): Likewise. (handle_v_run): Likewise. (captured_main): Likewise. * target.c (write_inferior_memory): Likewise. * thread-db.c (try_thread_db_load_from_dir): Likewise. * tracepoint.c (init_trace_buffer): Likewise. (add_tracepoint_action): Likewise. (add_traceframe): Likewise. (add_traceframe_block): Likewise. (cmd_qtdpsrc): Likewise. (cmd_qtdv): Likewise. (cmd_qtstatus): Likewise. (response_source): Likewise. (response_tsv): Likewise. (cmd_qtnotes): Likewise. (gdb_collect): Likewise. (initialize_tracepoint): Likewise.	2015-09-25 14:08:06 -04:00
Doug Evans	183dc7ecf6	dwarf2read.c (add_partial_symbol): Remove outdated comments. ... gdb/ChangeLog: * dwarf2read.c (add_partial_symbol): Remove outdated comments.	2015-09-20 21:48:31 -07:00
Doug Evans	2ee7123e5a	dwarf2_compute_name: add fixme, don't use same name as parameter for local ... gdb/ChangeLog: * dwarf2read.c (dwarf2_compute_name): Add FIXME. Don't use a local variable name that collides with a parameter.	2015-09-20 14:13:54 -07:00
Simon Marchi	8d7493201c	Replace some xmalloc-family functions with XNEW-family ones ... This patch is part of the make-gdb-buildable-in-C++ effort. The idea is to change some calls to the xmalloc family of functions to calls to the equivalents in the XNEW family. This avoids adding an explicit cast, so it keeps the code a bit more readable. Some of them also map relatively well to a C++ equivalent (XNEW (struct foo) -> new foo), so it will be possible to do scripted replacements if needed. I only changed calls that were obviously allocating memory for one or multiple "objects". Allocation of variable sizes (such as strings or buffer handling) will be for later (and won't use XNEW). - xmalloc (sizeof (struct foo)) -> XNEW (struct foo) - xmalloc (num * sizeof (struct foo)) -> XNEWVEC (struct foo, num) - xcalloc (1, sizeof (struct foo)) -> XCNEW (struct foo) - xcalloc (num, sizeof (struct foo)) -> XCNEWVEC (struct foo, num) - xrealloc (p, num * sizeof (struct foo) -> XRESIZEVEC (struct foo, p, num) - obstack_alloc (ob, sizeof (struct foo)) -> XOBNEW (ob, struct foo) - obstack_alloc (ob, num * sizeof (struct foo)) -> XOBNEWVEC (ob, struct foo, num) - alloca (sizeof (struct foo)) -> XALLOCA (struct foo) - alloca (num * sizeof (struct foo)) -> XALLOCAVEC (struct foo, num) Some instances of xmalloc followed by memset to zero the buffer were replaced by XCNEW or XCNEWVEC. I regtested on x86-64, Ubuntu 14.04, but the patch touches many architecture-specific files. For those I'll have to rely on the buildbot or people complaining that I broke their gdb. gdb/ChangeLog: * aarch64-linux-nat.c (aarch64_add_process): Likewise. * aarch64-tdep.c (aarch64_gdbarch_init): Likewise. * ada-exp.y (write_ambiguous_var): Likewise. * ada-lang.c (resolve_subexp): Likewise. (user_select_syms): Likewise. (assign_aggregate): Likewise. (ada_evaluate_subexp): Likewise. (cache_symbol): Likewise. * addrmap.c (allocate_key): Likewise. (addrmap_create_mutable): Likewise. * aix-thread.c (sync_threadlists): Likewise. * alpha-tdep.c (alpha_push_dummy_call): Likewise. (alpha_gdbarch_init): Likewise. * amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise. * arm-linux-nat.c (arm_linux_add_process): Likewise. * arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise. * arm-tdep.c (push_stack_item): Likewise. (arm_displaced_step_copy_insn): Likewise. (arm_gdbarch_init): Likewise. (_initialize_arm_tdep): Likewise. * avr-tdep.c (push_stack_item): Likewise. * ax-general.c (new_agent_expr): Likewise. * block.c (block_initialize_namespace): Likewise. * breakpoint.c (alloc_counted_command_line): Likewise. (update_dprintf_command_list): Likewise. (parse_breakpoint_sals): Likewise. (decode_static_tracepoint_spec): Likewise. (until_break_command): Likewise. (clear_command): Likewise. (update_global_location_list): Likewise. (get_breakpoint_objfile_data) Likewise. * btrace.c (ftrace_new_function): Likewise. (btrace_set_insn_history): Likewise. (btrace_set_call_history): Likewise. * buildsym.c (add_symbol_to_list): Likewise. (record_pending_block): Likewise. (start_subfile): Likewise. (start_buildsym_compunit): Likewise. (push_subfile): Likewise. (end_symtab_get_static_block): Likewise. (buildsym_init): Likewise. * cli/cli-cmds.c (source_command): Likewise. * cli/cli-decode.c (add_cmd): Likewise. * cli/cli-script.c (build_command_line): Likewise. (setup_user_args): Likewise. (realloc_body_list): Likewise. (process_next_line): Likewise. (copy_command_lines): Likewise. * cli/cli-setshow.c (do_set_command): Likewise. * coff-pe-read.c (read_pe_exported_syms): Likewise. * coffread.c (coff_locate_sections): Likewise. (coff_symtab_read): Likewise. (coff_read_struct_type): Likewise. * common/cleanups.c (make_my_cleanup2): Likewise. * common/common-exceptions.c (throw_it): Likewise. * common/filestuff.c (make_cleanup_close): Likewise. * common/format.c (parse_format_string): Likewise. * common/queue.h (DEFINE_QUEUE_P): Likewise. * compile/compile-object-load.c (munmap_list_add): Likewise. (compile_object_load): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * compile/compile.c (append_args): Likewise. * corefile.c (specify_exec_file_hook): Likewise. * cp-support.c (make_symbol_overload_list): Likewise. * cris-tdep.c (push_stack_item): Likewise. (cris_gdbarch_init): Likewise. * ctf.c (ctf_trace_file_writer_new): Likewise. * dbxread.c (init_header_files): Likewise. (add_new_header_file): Likewise. (init_bincl_list): Likewise. (dbx_end_psymtab): Likewise. (start_psymtab): Likewise. (dbx_end_psymtab): Likewise. * dcache.c (dcache_init): Likewise. * dictionary.c (dict_create_hashed): Likewise. (dict_create_hashed_expandable): Likewise. (dict_create_linear): Likewise. (dict_create_linear_expandable): Likewise. * dtrace-probe.c (dtrace_process_dof_probe): Likewise. * dummy-frame.c (register_dummy_frame_dtor): Likewise. * dwarf2-frame-tailcall.c (cache_new_ref1): Likewise. * dwarf2-frame.c (dwarf2_build_frame_info): Likewise. (decode_frame_entry_1): Likewise. * dwarf2expr.c (new_dwarf_expr_context): Likewise. * dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise. * dwarf2read.c (dwarf2_has_info): Likewise. (create_signatured_type_table_from_index): Likewise. (dwarf2_read_index): Likewise. (dw2_get_file_names_reader): Likewise. (create_all_type_units): Likewise. (read_cutu_die_from_dwo): Likewise. (init_tu_and_read_dwo_dies): Likewise. (init_cutu_and_read_dies): Likewise. (create_all_comp_units): Likewise. (queue_comp_unit): Likewise. (inherit_abstract_dies): Likewise. (read_call_site_scope): Likewise. (dwarf2_add_field): Likewise. (dwarf2_add_typedef): Likewise. (dwarf2_add_member_fn): Likewise. (attr_to_dynamic_prop): Likewise. (abbrev_table_alloc_abbrev): Likewise. (abbrev_table_read_table): Likewise. (add_include_dir): Likewise. (add_file_name): Likewise. (dwarf_decode_line_header): Likewise. (dwarf2_const_value_attr): Likewise. (dwarf_alloc_block): Likewise. (parse_macro_definition): Likewise. (set_die_type): Likewise. (write_psymtabs_to_index): Likewise. (create_cus_from_index): Likewise. (dwarf2_create_include_psymtab): Likewise. (process_psymtab_comp_unit_reader): Likewise. (build_type_psymtab_dependencies): Likewise. (read_comp_units_from_section): Likewise. (compute_compunit_symtab_includes): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (read_func_scope): Likewise. (process_structure_scope): Likewise. (mark_common_block_symbol_computed): Likewise. (load_partial_dies): Likewise. (dwarf2_symbol_mark_computed): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_read_minimal_symbols): Likewise. * environ.c (make_environ): Likewise. * eval.c (evaluate_subexp_standard): Likewise. * event-loop.c (create_file_handler): Likewise. (create_async_signal_handler): Likewise. (create_async_event_handler): Likewise. (create_timer): Likewise. * exec.c (build_section_table): Likewise. * fbsd-nat.c (fbsd_remember_child): Likewise. * fork-child.c (fork_inferior): Likewise. * frv-tdep.c (new_variant): Likewise. * gdbarch.sh (gdbarch_alloc): Likewise. (append_name): Likewise. * gdbtypes.c (rank_function): Likewise. (copy_type_recursive): Likewise. (add_dyn_prop): Likewise. * gnu-nat.c (make_proc): Likewise. (make_inf): Likewise. (gnu_write_inferior): Likewise. * gnu-v3-abi.c (build_gdb_vtable_type): Likewise. (build_std_type_info_type): Likewise. * guile/scm-param.c (compute_enum_list): Likewise. * guile/scm-utils.c (gdbscm_parse_function_args): Likewise. * guile/scm-value.c (gdbscm_value_call): Likewise. * h8300-tdep.c (h8300_gdbarch_init): Likewise. * hppa-tdep.c (hppa_init_objfile_priv_data): Likewise. (read_unwind_info): Likewise. * ia64-tdep.c (ia64_gdbarch_init): Likewise. * infcall.c (dummy_frame_context_saver_setup): Likewise. (call_function_by_hand_dummy): Likewise. * infcmd.c (step_once): Likewise. (finish_forward): Likewise. (attach_command): Likewise. (notice_new_inferior): Likewise. * inferior.c (add_inferior_silent): Likewise. * infrun.c (add_displaced_stepping_state): Likewise. (save_infcall_control_state): Likewise. (save_inferior_ptid): Likewise. (_initialize_infrun): Likewise. * jit.c (bfd_open_from_target_memory): Likewise. (jit_gdbarch_data_init): Likewise. * language.c (add_language): Likewise. * linespec.c (decode_line_2): Likewise. * linux-nat.c (add_to_pid_list): Likewise. (add_initial_lwp): Likewise. * linux-thread-db.c (add_thread_db_info): Likewise. (record_thread): Likewise. (info_auto_load_libthread_db): Likewise. * m32c-tdep.c (m32c_gdbarch_init): Likewise. * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise. * m68k-tdep.c (m68k_gdbarch_init): Likewise. * m88k-tdep.c (m88k_analyze_prologue): Likewise. * macrocmd.c (macro_define_command): Likewise. * macroexp.c (gather_arguments): Likewise. * macroscope.c (sal_macro_scope): Likewise. * macrotab.c (new_macro_table): Likewise. * mdebugread.c (push_parse_stack): Likewise. (parse_partial_symbols): Likewise. (parse_symbol): Likewise. (psymtab_to_symtab_1): Likewise. (new_block): Likewise. (new_psymtab): Likewise. (mdebug_build_psymtabs): Likewise. (add_pending): Likewise. (elfmdebug_build_psymtabs): Likewise. * mep-tdep.c (mep_gdbarch_init): Likewise. * mi/mi-main.c (mi_execute_command): Likewise. * mi/mi-parse.c (mi_parse_argv): Likewise. * minidebug.c (lzma_open): Likewise. * minsyms.c (terminate_minimal_symbol_table): Likewise. * mips-linux-nat.c (mips_linux_insert_watchpoint): Likewise. * mips-tdep.c (mips_gdbarch_init): Likewise. * mn10300-tdep.c (mn10300_gdbarch_init): Likewise. * msp430-tdep.c (msp430_gdbarch_init): Likewise. * mt-tdep.c (mt_registers_info): Likewise. * nat/aarch64-linux.c (aarch64_linux_new_thread): Likewise. * nat/linux-btrace.c (linux_enable_bts): Likewise. (linux_enable_pt): Likewise. * nat/linux-osdata.c (linux_xfer_osdata_processes): Likewise. (linux_xfer_osdata_processgroups): Likewise. * nios2-tdep.c (nios2_gdbarch_init): Likewise. * nto-procfs.c (procfs_meminfo): Likewise. * objc-lang.c (start_msglist): Likewise. (selectors_info): Likewise. (classes_info): Likewise. (find_methods): Likewise. * objfiles.c (allocate_objfile): Likewise. (update_section_map): Likewise. * osabi.c (gdbarch_register_osabi): Likewise. (gdbarch_register_osabi_sniffer): Likewise. * parse.c (start_arglist): Likewise. * ppc-linux-nat.c (hwdebug_find_thread_points_by_tid): Likewise. (hwdebug_insert_point): Likewise. * printcmd.c (display_command): Likewise. (ui_printf): Likewise. * procfs.c (create_procinfo): Likewise. (load_syscalls): Likewise. (proc_get_LDT_entry): Likewise. (proc_update_threads): Likewise. * prologue-value.c (make_pv_area): Likewise. (pv_area_store): Likewise. * psymtab.c (extend_psymbol_list): Likewise. (init_psymbol_list): Likewise. (allocate_psymtab): Likewise. * python/py-inferior.c (add_thread_object): Likewise. * python/py-param.c (compute_enum_values): Likewise. * python/py-value.c (valpy_call): Likewise. * python/py-varobj.c (py_varobj_iter_next): Likewise. * python/python.c (ensure_python_env): Likewise. * record-btrace.c (record_btrace_start_replaying): Likewise. * record-full.c (record_full_reg_alloc): Likewise. (record_full_mem_alloc): Likewise. (record_full_end_alloc): Likewise. (record_full_core_xfer_partial): Likewise. * regcache.c (get_thread_arch_aspace_regcache): Likewise. * remote-fileio.c (remote_fileio_init_fd_map): Likewise. * remote-notif.c (remote_notif_state_allocate): Likewise. * remote.c (demand_private_info): Likewise. (remote_notif_stop_alloc_reply): Likewise. (remote_enable_btrace): Likewise. * reverse.c (save_bookmark_command): Likewise. * rl78-tdep.c (rl78_gdbarch_init): Likewise. * rx-tdep.c (rx_gdbarch_init): Likewise. * s390-linux-nat.c (s390_insert_watchpoint): Likewise. * ser-go32.c (dos_get_tty_state): Likewise. (dos_copy_tty_state): Likewise. * ser-mingw.c (ser_windows_open): Likewise. (ser_console_wait_handle): Likewise. (ser_console_get_tty_state): Likewise. (make_pipe_state): Likewise. (net_windows_open): Likewise. * ser-unix.c (hardwire_get_tty_state): Likewise. (hardwire_copy_tty_state): Likewise. * solib-aix.c (solib_aix_new_lm_info): Likewise. * solib-dsbt.c (dsbt_current_sos): Likewise. (dsbt_relocate_main_executable): Likewise. * solib-frv.c (frv_current_sos): Likewise. (frv_relocate_main_executable): Likewise. * solib-spu.c (spu_bfd_fopen): Likewise. * solib-svr4.c (lm_info_read): Likewise. (svr4_copy_library_list): Likewise. (svr4_default_sos): Likewise. * source.c (find_source_lines): Likewise. (line_info): Likewise. (add_substitute_path_rule): Likewise. * spu-linux-nat.c (spu_bfd_open): Likewise. * spu-tdep.c (info_spu_dma_cmdlist): Likewise. * stabsread.c (dbx_lookup_type): Likewise. (read_type): Likewise. (read_member_functions): Likewise. (read_struct_fields): Likewise. (read_baseclasses): Likewise. (read_args): Likewise. (_initialize_stabsread): Likewise. * stack.c (func_command): Likewise. * stap-probe.c (handle_stap_probe): Likewise. * symfile.c (addrs_section_sort): Likewise. (addr_info_make_relative): Likewise. (load_section_callback): Likewise. (add_symbol_file_command): Likewise. (init_filename_language_table): Likewise. * symtab.c (create_filename_seen_cache): Likewise. (sort_search_symbols_remove_dups): Likewise. (search_symbols): Likewise. * target.c (make_cleanup_restore_target_terminal): Likewise. * thread.c (new_thread): Likewise. (enable_thread_stack_temporaries): Likewise. (make_cleanup_restore_current_thread): Likewise. (thread_apply_all_command): Likewise. * tic6x-tdep.c (tic6x_gdbarch_init): Likewise. * top.c (gdb_readline_wrapper): Likewise. * tracefile-tfile.c (tfile_trace_file_writer_new): Likewise. * tracepoint.c (trace_find_line_command): Likewise. (all_tracepoint_actions_and_cleanup): Likewise. (make_cleanup_restore_current_traceframe): Likewise. (get_uploaded_tp): Likewise. (get_uploaded_tsv): Likewise. * tui/tui-data.c (tui_alloc_generic_win_info): Likewise. (tui_alloc_win_info): Likewise. (tui_alloc_content): Likewise. (tui_add_content_elements): Likewise. * tui/tui-disasm.c (tui_find_disassembly_address): Likewise. (tui_set_disassem_content): Likewise. * ui-file.c (ui_file_new): Likewise. (stdio_file_new): Likewise. (tee_file_new): Likewise. * utils.c (make_cleanup_restore_integer): Likewise. (add_internal_problem_command): Likewise. * v850-tdep.c (v850_gdbarch_init): Likewise. * valops.c (find_oload_champ): Likewise. * value.c (allocate_value_lazy): Likewise. (record_latest_value): Likewise. (create_internalvar): Likewise. * varobj.c (install_variable): Likewise. (new_variable): Likewise. (new_root_variable): Likewise. (cppush): Likewise. (_initialize_varobj): Likewise. * windows-nat.c (windows_make_so): Likewise. * x86-nat.c (x86_add_process): Likewise. * xcoffread.c (arrange_linetable): Likewise. (allocate_include_entry): Likewise. (process_linenos): Likewise. (SYMBOL_DUP): Likewise. (xcoff_start_psymtab): Likewise. (xcoff_end_psymtab): Likewise. * xml-support.c (gdb_xml_parse_attr_ulongest): Likewise. * xtensa-tdep.c (xtensa_register_type): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. gdb/gdbserver/ChangeLog: * ax.c (gdb_parse_agent_expr): Likewise. (compile_bytecodes): Likewise. * dll.c (loaded_dll): Likewise. * event-loop.c (append_callback_event): Likewise. (create_file_handler): Likewise. (create_file_event): Likewise. * hostio.c (handle_open): Likewise. * inferiors.c (add_thread): Likewise. (add_process): Likewise. * linux-aarch64-low.c (aarch64_linux_new_process): Likewise. * linux-arm-low.c (arm_new_process): Likewise. (arm_new_thread): Likewise. * linux-low.c (add_to_pid_list): Likewise. (linux_add_process): Likewise. (handle_extended_wait): Likewise. (add_lwp): Likewise. (enqueue_one_deferred_signal): Likewise. (enqueue_pending_signal): Likewise. (linux_resume_one_lwp_throw): Likewise. (linux_resume_one_thread): Likewise. (linux_read_memory): Likewise. (linux_write_memory): Likewise. * linux-mips-low.c (mips_linux_new_process): Likewise. (mips_linux_new_thread): Likewise. (mips_add_watchpoint): Likewise. * linux-x86-low.c (initialize_low_arch): Likewise. * lynx-low.c (lynx_add_process): Likewise. * mem-break.c (set_raw_breakpoint_at): Likewise. (set_breakpoint): Likewise. (add_condition_to_breakpoint): Likewise. (add_commands_to_breakpoint): Likewise. (clone_agent_expr): Likewise. (clone_one_breakpoint): Likewise. * regcache.c (new_register_cache): Likewise. * remote-utils.c (look_up_one_symbol): Likewise. * server.c (queue_stop_reply): Likewise. (start_inferior): Likewise. (queue_stop_reply_callback): Likewise. (handle_target_event): Likewise. * spu-low.c (fetch_ppc_memory): Likewise. (store_ppc_memory): Likewise. * target.c (set_target_ops): Likewise. * thread-db.c (thread_db_load_search): Likewise. (try_thread_db_load_1): Likewise. * tracepoint.c (add_tracepoint): Likewise. (add_tracepoint_action): Likewise. (create_trace_state_variable): Likewise. (cmd_qtdpsrc): Likewise. (cmd_qtro): Likewise. (add_while_stepping_state): Likewise. * win32-low.c (child_add_thread): Likewise. (get_image_name): Likewise.	2015-08-26 17:18:12 -04:00
Pierre-Marie de Rodat	63e43d3aed	DWARF: handle non-local references in nested functions ... GDB's current behavior when dealing with non-local references in the context of nested fuctions is approximative: - code using valops.c:value_of_variable read the first available stack frame that holds the corresponding variable (whereas there can be multiple candidates for this); - code directly relying on read_var_value will instead read non-local variables in frames where they are not even defined. This change adds the necessary context to symbol reads (to get the block they belong to) and to blocks (the static link property, if any) so that GDB can make the proper decisions when dealing with non-local varibale references. gdb/ChangeLog: * ada-lang.c (ada_read_var_value): Add a var_block argument and pass it to default_read_var_value. * block.c (block_static_link): New accessor. * block.h (block_static_link): Declare it. * buildsym.c (finish_block_internal): Add a static_link argument. If there is a static link, associate it to the new block. (finish_block): Add a static link argument and pass it to finish_block_internal. (end_symtab_get_static_block): Update calls to finish_block and to finish_block_internal. (end_symtab_with_blockvector): Update call to finish_block_internal. * buildsym.h: Forward-declare struct dynamic_prop. (struct context_stack): Add a static_link field. (finish_block): Add a static link argument. * c-exp.y: Remove an obsolete comment (evaluation of variables already start from the selected frame, and now they climb *up* the call stack) and propagate the block information to the produced expression. * d-exp.y: Likewise. * f-exp.y: Likewise. * go-exp.y: Likewise. * jv-exp.y: Likewise. * m2-exp.y: Likewise. * p-exp.y: Likewise. * coffread.c (coff_symtab_read): Update calls to finish_block. * dbxread.c (process_one_symbol): Likewise. * xcoffread.c (read_xcoff_symtab): Likewise. * compile/compile-c-symbols.c (convert_one_symbol): Promote the "sym" parameter to struct block_symbol, update its uses and pass its block to calls to read_var_value. (convert_symbol_sym): Update the calls to convert_one_symbol. * compile/compile-loc2c.c (do_compile_dwarf_expr_to_c): Update call to read_var_value. * dwarf2loc.c (block_op_get_frame_base): New. (dwarf2_block_frame_base_locexpr_funcs): Implement the get_frame_base method. (dwarf2_block_frame_base_loclist_funcs): Likewise. (dwarf2locexpr_baton_eval): Add a frame argument and use it instead of the selected frame in order to evaluate the expression. (dwarf2_evaluate_property): Add a frame argument. Update call to dwarf2_locexpr_baton_eval to provide a frame in available and to handle the absence of address stack. * dwarf2loc.h (dwarf2_evaluate_property): Add a frame argument. * dwarf2read.c (attr_to_dynamic_prop): Add a forward declaration. (read_func_scope): Record any available static link description. Update call to finish_block. (read_lexical_block_scope): Update call to finish_block. * findvar.c (follow_static_link): New. (get_hosting_frame): New. (default_read_var_value): Add a var_block argument. Use get_hosting_frame to handle non-local references. (read_var_value): Add a var_block argument and pass it to the LA_READ_VAR_VALUE method. * gdbtypes.c (resolve_dynamic_range): Update calls to dwarf2_evaluate_property. (resolve_dynamic_type_internal): Likewise. * guile/scm-frame.c (gdbscm_frame_read_var): Update call to read_var_value, passing it the block coming from symbol lookup. * guile/scm-symbol.c (gdbscm_symbol_value): Update call to read_var_value (TODO). * infcmd.c (finish_command_continuation): Update call to read_var_value, passing it the block coming from symbol lookup. * infrun.c (insert_exception_resume_breakpoint): Likewise. * language.h (struct language_defn): Add a var_block argument to the LA_READ_VAR_VALUE method. * objfiles.c (struct static_link_htab_entry): New. (static_link_htab_entry_hash): New. (static_link_htab_entry_eq): New. (objfile_register_static_link): New. (objfile_lookup_static_link): New. (free_objfile): Free the STATIC_LINKS hashed map if needed. * objfiles.h: Include hashtab.h. (struct objfile): Add a static_links field. (objfile_register_static_link): New. (objfile_lookup_static_link): New. * printcmd.c (print_variable_and_value): Update call to read_var_value. * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise. * python/py-frame.c (frapy_read_var): Update call to read_var_value, passing it the block coming from symbol lookup. * python/py-framefilter.c (extract_sym): Add a sym_block parameter and set the pointed value to NULL (TODO). (enumerate_args): Update call to extract_sym. (enumerate_locals): Update calls to extract_sym and to read_var_value. * python/py-symbol.c (sympy_value): Update call to read_var_value (TODO). * stack.c (read_frame_local): Update call to read_var_value. (read_frame_arg): Likewise. (return_command): Likewise. * symtab.h (struct symbol_block_ops): Add a get_frame_base method. (struct symbol): Add a block field. (SYMBOL_BLOCK): New accessor. * valops.c (value_of_variable): Remove frame/block handling and pass the block argument to read_var_value, which does this job now. (value_struct_elt_for_reference): Update calls to read_var_value. (value_of_this): Pass the block found to read_var_value. * value.h (read_var_value): Add a var_block argument. (default_read_var_value): Likewise. gdb/testsuite/ChangeLog: * gdb.base/nested-subp1.exp: New file. * gdb.base/nested-subp1.c: New file. * gdb.base/nested-subp2.exp: New file. * gdb.base/nested-subp2.c: New file. * gdb.base/nested-subp3.exp: New file. * gdb.base/nested-subp3.c: New file.	2015-08-25 08:13:28 -04:00
Tom Tromey	049412e38f	gdb/dwarf2read.c: rename a field for c++ ... Fixes: ../../src/gdb/dwarf2read.c:127:15: error: declaration of ‘asection* dwarf2_section_info::<anonymous union>::asection’ [-fpermissive] asection *asection; ^ In file included from ../../src/gdb/common/common-types.h:35:0, from ../../src/gdb/common/common-defs.h:44, from ../../src/gdb/defs.h:28, from ../../src/gdb/dwarf2read.c:31: ../bfd/bfd.h:1596:3: error: changes meaning of ‘asection’ from ‘typedef struct bfd_section asection’ [-fpermissive] } asection; ^ gdb/ChangeLog: 2015-08-21 Tom Tromey <tromey@redhat.com> * dwarf2read.c (struct dwarf2_section_info): Rename field 'asection' to 'section'. (dwarf2_has_info, get_section_bfd_owner, get_section_bfd_section) (dwarf2_locate_sections, dwarf2_locate_sections) (locate_dwz_sections, locate_v1_virtual_dwo_sections) (dwarf2_locate_dwo_sections, dwarf2_locate_dwo_sections) (dwarf2_locate_v2_dwp_sections): Adjust.	2015-08-21 23:45:50 +01:00
Pedro Alves	40e3ad0ebb	Fix language of compilation unit with unknown file extension ... Here, in dwarfread.c:process_full_comp_unit: /* Set symtab language to language from DW_AT_language. If the compilation is from a C file generated by language preprocessors, do not set the language if it was already deduced by start_subfile. */ if (!(cu->language == language_c && COMPUNIT_FILETABS (cust)->language != language_c)) COMPUNIT_FILETABS (cust)->language = cu->language; in case start_subfile doesn't manage to deduce a language COMPUNIT_FILETABS(cust)->language ends up as language_unknown, not language_c. So the condition above evals false and we never set the language from the cu's language. gdb/ChangeLog: 2015-08-20 Pedro Alves <palves@redhat.com> * dwarf2read.c (process_full_comp_unit): To tell whether start_subfile managed to deduce a language, test for language_unknown instead of language_c. gdb/testsuite/ChangeLog: 2015-08-20 Pedro Alves <palves@redhat.com> * gdb.dwarf2/comp-unit-lang.exp: New file. * gdb.dwarf2/comp-unit-lang.c: New file.	2015-08-20 12:30:08 +01:00
Kevin Buettner	7d45c7c3f6	dwarf2read.c: Check type of string valued attributes prior to decoding. ... This change introduces a new function, dwarf2_string_attr(), which is a wrapper for dwarf2_attr(). dwarf2read.c has been updated to call dwarf2_string_attr in most instances where a string-valued attribute is decoded to produce a string value. In most cases, it simplifies the code; in some instances, the complexity of the code remains unchanged. I performed this change by looking for instances where the result of DW_STRING was used in an assignment. Many of these had a pattern which (roughly) looks something like this: struct attribute *attr = NULL; attr = dwarf2_attr (die, name, cu); if (attr != NULL && DW_STRING (attr)) { const char *str; ... str = DW_STRING (attr); ... /* Use str in some fashion. */ } Code of this form is transformed to look like this instead: const char *str; str = dwarf2_string_attr (die, name, cu) if (str != NULL) { ... /* Use str in some fashion. */ ... } In addition to invoking dwarf2_attr() and DW_STRING(), dwarf2_string_attr() checks to make sure that the attribute's `form' field matches one of DW_FORM_strp, DW_FORM_string, or DW_FORM_GNU_strp_alt. If it does not match one of these forms, it will return a NULL value in addition to calling complaint(). An earlier version of this patch did this type checking for one particular instance where a string attribute was being decoded. The situation that I was attempting to handle in that earlier patch is this: The Texas Instruments compiler uses the encoding for DW_AT_MIPS_linkage_name for other purposes. TI uses the encoding, 0x2007, for TI_AT_TI_end_line which, unlike DW_AT_MIPS_linkage_name, does not have a string-typed value. In this instance, GDB was attempting to use an integer value as a string pointer, with predictable results. (GDB would die with a segmentation fault.) I've added a test which reproduces the problem that I was orignally wanting to fix. It uses DW_AT_MIPS_linkage name with an associate value which is a string, and again, where the value is a small integer. My test case causes GDB to segfault in an unpatched GDB. There will be two PASSes in a patched GDB. Unpatched GDB: (gdb) ptype f ERROR: Process no longer exists UNRESOLVED: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype f ERROR: Couldn't send ptype g to GDB. UNRESOLVED: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype g Patched GDB: (gdb) ptype f type = bool () (gdb) PASS: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype f ptype g type = bool () (gdb) PASS: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype g I see no regressions on an x86_64 native target. gdb/ChangeLog: * dwarf2read.c (dwarf2_string_attr): New function. (lookup_dwo_unit, process_psymtab_comp_unit_reader) (dwarf2_compute_name, dwarf2_physname, find_file_and_directory) (read_call_site_scope, namespace_name, guess_full_die_structure_name) (anonymous_struct_prefix, prepare_one_comp_unit): Use dwarf2_string_attr in place of dwarf2_attr and DW_STRING. gdb/testsuite/ChangeLog: * gdb.dwarf2/dw2-bad-mips-linkage-name.c: New file. * gdb.dwarf2/dw2-bad-mips-linkage-name.exp: New file.	2015-08-19 11:48:13 -07:00
Doug Evans	1762568fd6	psymtab.c (add_psymbol_to_bcache): Remove "val" arg. ... gdb/ChangeLog: * psymtab.c (add_psymbol_to_bcache): Remove "val" arg. All callers updated. (add_psymbol_to_list): Ditto.	2015-08-15 22:08:47 -07:00
Doug Evans	8763cedeec	Add end_psymtab_common, have all debug info readers call it. ... gdb/ChangeLog: * dbxread.c (dbx_end_psymtab): Renamed from end_psymtab. All callers updated. Call end_psymtab_common. * dwarf2read.c (process_psymtab_comp_unit_reader): Call end_psymtab_common. (build_type_psymtabs_reader): Ditto. * psympriv.h (sort_pst_symbols): Delete. (end_psymtab_common): Declare. * psymtab.c (sort_pst_symbols): Make static. (end_psymtab_common): New function. * xcoffread.c (xcoff_end_psymtab): Call end_psymtab_common.	2015-08-15 16:46:20 -07:00
Pierre-Marie de Rodat	22cee43f9a	[Ada] Add support for subprogram renamings ... Consider the following declaration: function Foo (I : Integer) return Integer renames Pack.Bar; As Foo is not materialized as a routine whose name is derived from Foo, GDB currently cannot use it: (gdb) print foo(0) No definition of "foo" in current context. However, compilers can emit DW_TAG_imported_declaration in order to materialize the fact that Foo is actually another name for Pack.Bar. This commit enhances the DWARF reader to record global renamings (it used to put global ones in a static block) and enhances the Ada engine to leverage this information during symbol lookup. gdb/ChangeLog: * ada-lang.c: Include namespace.h (aux_add_nonlocal_symbols): Fix a function name in comment. (ada_add_block_renamings): New. (add_nonlocal_symbols): Add global renamings handling. (ada_lookup_symbol_list_worker): Move the symbol lookup part to... (ada_add_all_symbols): ... this new function. (ada_add_block_symbols): Try to match the input name against the "using directives list", perform a recursive symbol lookup on the matched declarations. * block.h (struct block): Move the_namespace to top-level as namespace_info. Remove the language_specific field. (BLOCK_NAMESPACE): Update access to the namespace_info field. * buildsym.h (using_directives): Rename into... (local_using_directives): ... this. (global_using_directives): New. (struct context_stack): Rename the using_directives field into local_using_directives. * buildsym.c (finish_block_internal): Deal with the proper using directives repository (local or global). (prepare_for_building): Reset local_using_directives. Assert that there is no pending global using directive. (reset_symtab_globals): Reset global_using_directives and local_using_directives. (end_symtab_get_static_block): Don't ignore symtabs that have only using directives. (push_context): Update references to local_using_directives. (buildsym_init): Do not reset using_directives. * cp-support.c: Include namespace.h. * cp-support.h (struct using_direct): Move to namespace.h. (cp_add_using_directives): Move to namespace.h. * cp-namespace.c: Include namespace.h (cp_add_using_directive): Move to namespace.c, rename it to add_using_directive, add a "using_directives" argument and use it as the pending using directives repository. All callers updated. * dwarf2read.c (using_directives): New. (read_import_statement): Call using_directives. (read_func_scope): Update references to local_using_directives. (read_lexical_block_scope): Likewise. (read_namespace): Update the heading comment, call using_directives. * namespace.h: New file. * namespace.c: New file. * Makefile.in (SFILES): Add namespace.c. (COMMON_OBS): Add namespace.o gdb/testsuite/ChangeLog: * gdb.ada/fun_renaming.exp: New testcase. * gdb.ada/fun_renaming/fun_renaming.adb: New file. * gdb.ada/fun_renaming/pack.adb: New file. * gdb.ada/fun_renaming/pack.ads: New file. Tested on x86_64-linux. Support for this in GCC is in the pipeline: see <https://gcc.gnu.org/ml/gcc-patches/2015-07/msg02166.html>.	2015-08-13 09:33:42 +02:00
Simon Marchi	aead7601eb	Add casts for legitimate integer to enum conversions ... This patch is mostly extracted from Pedro's C++ branch. It adds explicit casts from integer to enum types, where it is really the intention to do so. This could be because we are ... * iterating on enum values (we need to iterate on an equivalent integer) * converting from a value read from bytes (dwarf attribute, agent expression opcode) to the equivalent enum * reading the equivalent integer value from another language (Python/Guile) An exception to that is the casts in regcache.c. It seems to me like struct regcache's register_status field could be a pointer to an array of enum register_status. Doing so would waste a bit of memory (4 bytes used by the enum vs 1 byte used by the current signed char, for each register). If we switch to C++11 one day, we can define the underlying type of an enum type, so we could have the best of both worlds. gdb/ChangeLog: * arm-tdep.c (set_fp_model_sfunc): Add cast from integer to enum. (arm_set_abi): Likewise. * ax-general.c (ax_print): Likewise. * c-exp.y (exp : string_exp): Likewise. * compile/compile-loc2c.c (compute_stack_depth_worker): Likewise. (do_compile_dwarf_expr_to_c): Likewise. * cp-name-parser.y (demangler_special : DEMANGLER_SPECIAL start): Likewise. * dwarf2expr.c (execute_stack_op): Likewise. * dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise. (disassemble_dwarf_expression): Likewise. * dwarf2read.c (dwarf2_add_member_fn): Likewise. (read_array_order): Likewise. (abbrev_table_read_table): Likewise. (read_attribute_value): Likewise. (skip_unknown_opcode): Likewise. (dwarf_decode_macro_bytes): Likewise. (dwarf_decode_macros): Likewise. * eval.c (value_f90_subarray): Likewise. * guile/scm-param.c (gdbscm_make_parameter): Likewise. * i386-linux-tdep.c (i386_canonicalize_syscall): Likewise. * infrun.c (handle_command): Likewise. * memory-map.c (memory_map_start_memory): Likewise. * osabi.c (set_osabi): Likewise. * parse.c (operator_length_standard): Likewise. * ppc-linux-tdep.c (ppc_canonicalize_syscall): Likewise, and use single return point. * python/py-frame.c (gdbpy_frame_stop_reason_string): Likewise. * python/py-symbol.c (gdbpy_lookup_symbol): Likewise. (gdbpy_lookup_global_symbol): Likewise. * record-full.c (record_full_restore): Likewise. * regcache.c (regcache_register_status): Likewise. (regcache_raw_read): Likewise. (regcache_cooked_read): Likewise. * rs6000-tdep.c (powerpc_set_vector_abi): Likewise. * symtab.c (initialize_ordinary_address_classes): Likewise. * target-debug.h (target_debug_print_signals): Likewise. * utils.c (do_restore_current_language): Likewise.	2015-08-06 17:22:49 -04:00
Pedro Alves	666fcf91c0	dwarf2read.c: fix latent buglet ... cust->includes is: struct compunit_symtab { ... struct compunit_symtab **includes; gdb/ChangeLog: 2015-08-03 Pedro Alves <palves@redhat.com> * dwarf2read.c (compute_compunit_symtab_includes): Use size of struct compunit_symtab pointer.	2015-08-03 18:55:12 +01:00
Doug Evans	cc12ce380e	Fix crash when reading dummy CUs. ... Dummy CUs are used by the incremental linker to pre-allocate space in the output file. They have a DWARF header but no contents. gdb/ChangeLog: * dwarf2read.c (dwarf2_per_cu_data): Add comment. (load_cu): Handle dummy CUs. (dw2_do_instantiate_symtab, process_queuef): Ditto. (dwarf2_fetch_die_loc_sect_off, dwarf2_fetch_constant_bytes): Ditto. gdb/testsuite/ChangeLog: * gdb.dwarf2/dw2-dummy-cu.S: New file. * gdb.dwarf2/dw2-dummy-cu.exp: New file.	2015-07-23 09:25:49 -07:00
Kevin Buettner	b4e1fd615a	dwarf2read: Allow SEC_ALLOC sections to be located at address 0. ... GDB already allows statically initialized variables, located in SEC_LOAD sections, to be placed at address 0. This change allows uninitialized variables (which are in SEC_ALLOC sections) to be placed address 0 as well. gdb/ChangeLog: * dwarf2read.c (dwarf2_locate_sections): Allow has_section_at_zero to be set for SEC_ALLOC sections too.	2015-07-18 10:10:15 -07:00
Iain Buclaw	452802827f	Add support reading D modules from DWARF ... Extends existing support for namespaces/modules in C++/Fortran/Java to include language_d too. However unlike Fortran/C++, the separator for qualified names is a single dot. 2015-07-14 Iain Buclaw <ibuclaw@gdcproject.org> * dwarf2read.c (find_slot_in_mapped_hash): Extend language support to also test for language_d. (dwarf2_compute_name): Likewise. (read_func_scope): Likewise. (read_structure_type): Likewise. (determine_prefix): Likewise. (read_import_statement): Use dot as the separator for language_d. (typename_concat): Likewise, but don't prefix the D main function.	2015-07-14 20:31:21 +02:00