2004-09-23 Kelley Cook <kcook@gcc.gnu.org>
* config.guess: New upstream version
* compile, depcomp, install-sh, ylwrap: Likewise.
2004-09-19 Roger Sayle <roger@eyesopen.com>
* config/mh-x86omitfp: New host makefile fragment. Add
-fomit-frame-pointer to the default BOOT_CFLAGS.
* configure.in: Use it to speed up bootstrap on some IA-32 hosts.
* configure: Regenerate.
2004-09-15 Andrew Pinski <pinskia@physics.uc.edu>
PR target/11572
* configure.in (*-*-darwin*): Renable libobjc.
* configure: Regenerate.
* Makefile.def (bootstrap stages): Add 'lean' parameter.
* Makefile.tpl (configure-stageN-*, all-stageN-*): Turned into
phony targets; do not generate timestamp files.
(distclean-stageN): Remove references to their timestamp files.
(restageN, touch-stageN): Remove.
(stageN-bubble): Rewritten.
(compare): Support lean bootstraps.
* Makefile.in: Regenerate.
* configure.in: Only warn when bootstrapping but
build != host or build != target. Support lean bootstraps.
* configure: Regenerate.
Sync from gcc:
2004-08-26 Phil Edwards <phil@codesourcery.com>
* configure.in: Give a better error message if GMP/MPFR are missing
and a language needing them has been requested.
* configure: Regenerated.
2004-08-25 Phil Edwards <phil@codesourcery.com>
* configure.in: Print a list of available language front-ends if
a requested one is missing. Tidy stray tab characters.
* configure: Regenerated.
* Makefile.in: Regenerate.
* configure: Regenerate.
* Makefile.def (bootstrap-stage): Rename extra_*_flags to
stage_*_flags.
* Makefile.tpl (configure-[+module+], all-[+module+]): Exit
for bootstrapped modules if toplevel bootstrap is going.
(GCC bootstrap): Generate per-stage targets for all bootstrapped
modules. Adjust for changes in Makefile.def. Enable several
rules even in non-bootstrap mode, just to avoid peppering the
template with unnecessary "@if/@endif gcc-bootstrap" pairs.
(stage-[+prev+]-bubble): Remove.
* Makefile.def (Dependencies): Depend on all-build-bison,
all-build-flex, all-build-byacc, all-build-texinfo, rather
than the host variations.
* Makefile.tpl (BUILD_DIR_PREFIX): Remove. Replace throughout
with BUILD_SUBDIR.
(BISON): Update for recent Bisons.
(YACC): Fix typo.
(cross): Depend on all-build.
(all): Do not depend on all-build.
(prebootstrap): Remove.
(dep-kind): Accept separate prefixes for MODULE and ON variables.
(Prebootstrap dependencies): Add them to the per-stage targets
and to all-prebootstrap.
* configure.in (build_configdirs): Always enable build_tools.
(BUILD_DIR_PREFIX): Remove.
* Makefile.def (gcc): Add target variable.
(gdb, expect, guile, tk, tix): Replace with_x with extra_make_flags.
* Makefile.tpl (Autogenerated `all-*' targets): Invoke $(TARGET-*)
in the recursive `make', instead of hardwiring `all'.
(Autogenerated TARGET-* variables): New.
2004-08-09 Mark Mitchell <mark@codesourcery.com>
* configure.in (arm*-*-eabi*): New target.
* configure: Regenerate.
2004-08-03 Paul Brook <paul@codesourcery.com>
* configure.in: Check for MPFR as well as GMP.
* configure: Regenerate.
2004-08-01 Robert Millan <robertmh@gnu.org>
* configure.in: Turn mt-linux into mt-gnu. Use mt-gnu and enable
libmudflap for all GNU-based systems (with Glibc).
* configure: Regenerate.
* Makefile.def (bfd, opcodes, gcc, zlib): Mark as bootstrap module.
(bison, byacc, flex, texinfo): Do not mark as bootstrap module.
(Dependencies): New section.
* Makefile.tpl (Dependencies): Generate from Makefile.def.
(configure-target-[+module+]): Depend on maybe-all-gcc
(all-prebootstrap): New name of all-bootstrap. Changed throughout.
(toplevel profiledbootstrap): Fix dependencies.
* Makefile.in: Regenerate.
* Makefile.def (host-modules): Add gcc.
* Makefile.in: Regenerate.
* Makefile.tpl (sorry): New rule.
(configure-host, all-host, [+make_target+]-host, do-check,
install-host): Do not add gcc as a special case.
(host modules): Add a small special-casing for gcc. Export
extra_make_flags through the environment.
(maybe-configure-gcc, configure-gcc, maybe-all-gcc, all-gcc,
maybe-check-gcc, check-gcc, maybe-install-gcc, install-gcc,
other recursive targets for gcc): Remove.
(all, do-[+make_target+], do-check): Wrap between unstage and stage.
(stage, unstage): New rules.
(stage[+id+]-start, stage[+id+]-end, [+compare-target+],
distclean-stage[+id+]): Use stage_current.
([+bootstrap-target+], profiledbootstrap): Do not invoke manually
the stage*-start rules.
* configure.in: Add noconfigdirs for crx-*-*.
* configure: Regenerate.
2004-07-09 Loren J. Rittle <ljrittle@acm.org>
* configure.in: Build libmudflap by default on FreeBSD.
* configure: Regenerated.
2004-07-09 Mark Mitchell <mark@codesourcery.com>
* configure.in: Do not build libmudflap by default on non-GNU/Linux
systems.
* configure: Regenerated.
2004-07-08 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
PR target/16344
* Makefile.tpl (profiledbootstrap): Build runtime libraries with
feedback based compiler.
* Makefile.in: Rebuilt.
2004-07-05 Phil Edwards <phil@codesourcery.com>
* configure.in: Do not prepend $srcdir to /dev/null in
makefile fragments.
* configure: Regenerate.
* Makefile.def (build_modules): Add bison, byacc, flex,
m4, texinfo.
(flags_to_pass): Add FLEX.
* Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
(BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
(DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
DEFAULT_MAKEINFO): Remove.
(CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
(YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
objdir or else use configured tool.
(all-build): New.
(all): Depend on it.
(Build module dependencies): Add.
* Makefile.in: Regenerate.
* configure.in: Better support for multiple build modules,
matching what is done for host/target modules. Do not look
for "plausible" locations of build tools if Canadian cross.
Use autoconf's AC_PROG_CC to find a C compiler. Define
BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
* configure: Regenerate.
* Makefile.tpl (touch-stage[+id+]): New.
(restage[+prev+]): Depend on touch-stage[+id+].
* Makefile.tpl (RECURSE_FLAGS_TO_PASS): New.
Use it throughout.
* Makefile.def: Add profile and feedback bootstrap stages.
Remove next field from bootstrap stages.
* Makefile.tpl (LN, LN_S): Substitute.
(stageN-start, stageN-end): Use double-colon rules, to
provide a hook for additional setup commands.
(distclean-stageN-gcc, restageN): Create dependencies from
[+prev+], not from [+next+].
(stageN-bubble): Add commands for successive stages from
[+prev+], using double-colon rules.
(all-stageN-gcc): Fix typo.
(stagefeedback-start, profiledbootstrap): New.
* Makefile.in: Regenerate.
* configure.in: Call ACX_PROG_LN.
* configure: Regenerate.
config/ChangeLog:
2004-06-09 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (ACX_PROG_LN): From gcc, modified to
accept a parameter.
Merge this patch from the gcc tree:
2004-05-30 Andreas Jaeger <aj@suse.de>
Jim Wilson <wilson@specifixinc.com>
* config-ml.in: Pass FFLAGS and ADAFLAGS for multilibs, handle F77
like CC.
* Makefile.tpl (all.normal): Rename to all.
(all): Replace with a rule to pick the default
target from configure.
(all-gcc, configure-gcc): Use conditionals to
do nothing when toplevel bootstrap is going on.
(GCC directory bootstrap) [gcc-bootstrap]: Disable.
(Toplevel bootstrap) [gcc-no-bootstrap]: Disable.
* configure.in: Support --enable-bootstrap.
* Makefile.def: Remove new- prefix from toplevel
bootstrap targets.
* Makefile.tpl: Likewise.
* Makefile.def: Add bootstrap_stage 4. Add bootstrap2
target.
* Makefile.tpl (Toplevel bootstrap): Pass $(BASE_FLAGS_TO_PASS)
$(RECURSE_FLAGS) to recursive invocation of make.
* Makefile.in: Regenerate.
* configure: Regenerate.
(STAGE_HOST_EXPORTS, BASE_TARGET_EXPORTS, RAW_CXX_TARGET_EXPORTS)
(NORMAL_TARGET_EXPORTS): New macros. Use them in all the recursive
targets.
* Makefile.in: Regenerate.
2004-04-27 Paolo Bonzini <bonzini@gnu.org>
Revert:
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (flags_to_pass): Remove *dir variables that
are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
as well as prefix and exec_prefix.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (host_modules): Mark with the bootstrap
flag packages on which gcc depends.
* Makefile.tpl (all-bootstrap): Use it.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (flags_to_pass): Remove *dir variables that
are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
as well as prefix and exec_prefix.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Invoke ACX_PROG_CMP_IGNORE_INITIAL.
* configure: Regenerate.
* config/acx.m4: Mutuate ACX_PROG_CMP_IGNORE_INITIAL from gcc.
* gcc/Makefile.tpl (compare): Use the result of the test.
* gcc/Makefile.in: Regenerate.
2004-04-23 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (all-stage1-gcc, all-stage2-gcc, all-stage3-gcc):
Always relocate gcc and prev-gcc to the original names, even
if the build fails.
(new-cleanstrap, new-restage1, new-restage2, new-restage3):
New targets.
PR bootstrap/14871
* Makefile.tpl: If we don't have built-in-tree target tools,
use the ones found by configure rather than hacking around with
program_transform_name.
* configure.in: Give Makefile.tpl the information necessary
to do that.
* Makefile.in: Regenerate.
* configure: Regenerate.
2004-04-06 Nathanael Nerode <neroden@gcc.gnu.org>
PR bootstrap/14760
* configure.in: When computing baseargs, strip *all* copies of
offending options. Also, don't match/substitute the trailing space,
so that this actually works when two similar options are separated by
only one space.
* configure: Regenerate.
2004-04-06 David Edelsohn <edelsohn@gnu.org>
* configure.in (powerpc-*-aix*): Remove target-libada from noconfigdirs.
(rs6000-*-aix*): Same.
* configure: Regenerate.
to set @stage2_werror_flag@.
* configure: Regenerate.
* Makefile.tpl (top level bootstrap support): Pass
@stage2_werror_flag@ down to configure in stages 2 and 3.
* Makefile.in: Regenerate.
* Makefile.tpl (new-bootstrap): Set CC and CC_FOR_BUILD in configure
for stages 2 and 3 as well as in make. As a consequence, remove
OUTPUT_OPTION (now detected by configure) from the flags passed down
to make.
* Makefile.in: Regenerate.
* Makefile.tpl (new-bootstrap): Fix typo.
* Makefile.in: Regenerate.
into their proper sections.
* Makefile.tpl (top level bootstrap support): Move disabling
of coverage flags from 'make' to 'configure'; improve comments.
* Makefile.in: Regenerate.
* Makefile.tpl (experimental top level bootstrap) Move stage1
language setting from all- target to configure- target; disable
intermodule optimization in stage 1; prevent gratuitous rebuilds
of stage 1.
* Makefile.in: Regenerate.
* configure.in: Comma-separate stage 1 language list for top
level bootstrap.
* configure: Regenerate.
* Makefile.tpl: Clean up experimental top level bootstrap support:
note known problems; set CONFIG_SHELL; don't set BUILD_CC; relocate
prev-gcc in configure- targets as well as all- targets.
* Makefile.in: Regenerate.
Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/14522
* configure.in: Cope with shell that do not support nesting
quotes inside quoted backquote substitutions.
* configure: Regenerate.
2004-03-10 Andrew Pinski <pinskia@physics.uc.edu>
PR bootstrap/14522
* configure.in: Fix escaping of $.
* configure: Regenerate.
2004-03-11 Nathanael Nerode <neroden@gcc.gnu.org>
* configure: Regenerate.
2004-03-08 Paolo Bonzini <bonzini@gnu.org>
PR ada/14131
Move language detection to the top level.
* configure.in: Find default values for the tools as
soon as possible. Disable ada if GNAT is not found.
Emit error message about missing languages. Expand
--enable-languages=all for the gcc subdirectory.
(config)
2004-03-08 Paolo Bonzini <bonzini@gnu.org>
PR ada/14131
Move language detection to the top level.
* acx.m4 (ACX_PROG_GNAT): New macro, moved here
from the gcc subdirectory.
2004-03-09 Hans-Peter Nilsson <hp@axis.com>
* accross.m4 (AC_C_BIGENDIAN_CROSS): Compile endian probe with
"-c". Properly quote parameter for AC_MSG_ERROR.
2004-02-19 Andrew Cagney <cagney@redhat.com>
* config.guess: Update from version 2003-06-12 to 2004-02-16.
* config.sub: Update from version 2003-06-13 to 2004-02-16.
Index: dejagnu/ChangeLog
2004-02-19 Andrew Cagney <cagney@redhat.com>
* config.guess: Update from version 2003-06-12 to 2004-02-16.
* config.sub: Update from version 2003-06-13 to 2004-02-16.
Index: readline/ChangeLog.gdb
2004-02-19 Andrew Cagney <cagney@redhat.com>
* config.guess: Update from version 2003-06-12 to 2004-02-16.
* config.sub: Update from version 2003-06-13 to 2004-02-16.
(I don't know if it will fix either of them, but it relates
to them.)
* configure.in: Don't use shared config.cache for target
directories.
* configure: Regenerate.
* config-ml.in: Use ac_configure_args directly instead of
ml_arguments. Only set ml_norecursion if --no[-]recursion is
actually seen.
2003-10-01 Eric Botcazou <ebotcazou@libertysurf.fr>
* config-ml.in: Propagate INSTALL variables.
2003-08-23 Phil Edwards <pme@gcc.gnu.org>
* configure.in: Use newline instead of semicolon when assuming
shell arguments in a for loop.
* configure: Regenerated.
* configure.in: Switch more things to use maybe dependencies.
* Makefile.tpl: Switch more things to use maybe dependencies.
Factor out common code from autogen IF statements.
* configure: Regenerate.
* Makefile.in: Regenerate.
* configure.in: Switch more things to use maybe dependencies.
Rearrange a little. Use GCC_TOPLEV_SUBDIRS.
* configure: Regenerate.
* Makefile.tpl: Switch more things to use maybe dependencies.
* Makefile.in: Regenerate.
<config>
* config/acx.m4: Introduce _GCC_TOPLEV_NONCANONICAL_BUILD,
_GCC_TOPLEV_NONCANOICAL_HOST, _GCC_TOPLEV_NONCANONICAL_TARGET,
GCC_TOPLEV_SUBDIRS.
(multilib.ts): ... this. Moved into...
(multilib.out): ... this. Don't use sub-make.
($(BUILD_SUBDIR)/[+module+]/Makefile, [+module+]/Makefile,
$(TARGET_SUBDIR)/[+module+]/Makefile, gcc/Makefile): Moved into...
(configure-build-[+module+], configure-[+module+],
configure-target-[+module+], configure-gcc): ... these. Test
for Makefile existence. Drop config.status from dependencies.
* Makefile.in: Rebuilt.
* configure.in: Move gcc-version-trigger to the end of
ac_configure_args. Add comments to maybedep.tmp and
serdep.tmp. Introduce --disable-serial-configure. Remove
nonopt from baseargs, matching and removing corresponding
whitespace while at it.
* configure: Rebuilt.
program_transform_name to standard idiom.
(AUTOGEN, AUTOCONF): Define.
(Makefile.in): Use $(AUTOGEN).
(Makefile): Depend on config.status, and use autoconf-style rule to
build it. Move original commands to...
(config.status): ... this new target.
(configure): Add $(srcdir). Depend on config/acx.m4. Use
$(AUTOCONF).
* Makefile.in: Rebuilt.
