Some instructions can be emitted (dwarf2_emit_insn is called) before the
first .file <NUMBER> directive has been seen, which allocates the input
file as the first file entry. Reuse the input file entry in the file
table.
PR gas/25878
PR gas/26740
* dwarf2dbg.c (file_entry): Remove auto_assigned.
(assign_file_to_slot): Remove the auto_assign argument.
(allocate_filenum): Updated.
(allocate_filename_to_slot): Reuse the input file entry in the
file table.
(dwarf2_where): Replace as_where with as_where_physical.
* testsuite/gas/i386/dwarf5-line-1.d: New file.
* testsuite/gas/i386/dwarf5-line-1.s: Likewise.
* testsuite/gas/i386/i386.exp: Run dwarf5-line-1.
Rename VexOpcode to OpcodePrefix so that OpcodePrefix can be used for
regular encoding prefix.
gas/
* config/tc-i386.c (build_vex_prefix): Replace vexopcode with
opcodeprefix.
(build_evex_prefix): Likewise.
(is_any_vex_encoding): Don't check vexopcode.
(output_insn): Handle opcodeprefix.
opcodes/
* i386-gen.c (opcode_modifiers): Replace VexOpcode with
OpcodePrefix.
* i386-opc.h (VexOpcode): Renamed to ...
(OpcodePrefix): This.
(PREFIX_NONE): New.
(PREFIX_0X66): Likewise.
(PREFIX_0XF2): Likewise.
(PREFIX_0XF3): Likewise.
* i386-opc.tbl (Prefix_0X66): New.
(Prefix_0XF2): Likewise.
(Prefix_0XF3): Likewise.
Replace VexOpcode= with OpcodePrefix=. Use Prefix_0X66 on xorpd.
Use Prefix_0XF3 on cvtdq2pd. Use Prefix_0XF2 on cvtpd2dq.
* i386-tbl.h: Regenerated.
This patch fixes a bogus use of type punning in parse_barrier() which
was causing an assembly failure on big endian LP64 hosts when attempting
to assemble "isb sy" for AArch64.
The type of the entries in aarch64_barrier_opt_hsh is
aarch64_name_value_pair. We were incorrectly casting this to the
locally-defined asm_barrier_opt which has a wider type (on LP64) for the
second member. This happened to work on little-endian hosts but fails on
LP64 big endian.
The fix is to use the correct type in parse_barrier(). This makes the
locally-defined asm_barrier_opt redundant, so remove it.
gas/ChangeLog:
* config/tc-aarch64.c (asm_barrier_opt): Delete.
(parse_barrier): Fix bogus type punning.
* testsuite/gas/aarch64/system.d: Update disassembly.
* testsuite/gas/aarch64/system.s: Add isb sy test.
PR 26692
* config/tc-z80.c (md_begin): Ensure that xpressions are empty
before using them.
(unify_indexed): Likewise.
(z80_start_line_hook): Improve hash sign handling when SDCC
compatibility mode enabled.
(md_parse_exp_not_indexed): Improve indirect addressing
detection.
(md_pseudo_table): Accept hd64 as an alias of z810.
This is feature flags update for Cortex-X1 CPU.
For more information about this processor, see [0].
[0] : https://www.arm.com/products/cortex-x
gas/ChangeLog:
2020-10-05 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/tc-aarch64.c: Update Cortex-X1 feature flags.
This is feature flags update for Cortex-X1 CPU.
For more information about this processor, see [0].
[0] : https://www.arm.com/products/cortex-x
gas/ChangeLog:
2020-10-05 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/tc-arm.c: Update Cortex-X1 feature flags.
In 64bit, assembler generates a warning for "sysret":
$ echo sysret | as --64 -o x.o -
{standard input}: Assembler messages:
{standard input}:1: Warning: no instruction mnemonic suffix given and no register operands; using default for `sysret'
Always display suffix for %LQ in 64bit to display "sysretl".
gas/
PR binutils/26704
* testsuite/gas/i386/noreg64-data16.d: Expect sysretl instead of
sysret.
* testsuite/gas/i386/noreg64.d: Likewise.
* testsuite/gas/i386/x86-64-intel64.d: Likewise.
* testsuite/gas/i386/x86-64-opcode.d: Likewise.
opcodes/
PR binutils/26704
* i386-dis.c (putop): Always display suffix for %LQ in 64bit.
The MODRM byte can be checked to display the instruction name only if the
MODRM byte needed. Clear modrm if the MODRM byte isn't needed so that
modrm field checks in putop like, modrm.mod == N with N != 0, can be done
without checking need_modrm.
gas/
PR binutils/26705
* testsuite/gas/i386/x86-64-suffix.s: Add "mov %rsp,%rbp" before
sysretq.
* testsuite/gas/i386/x86-64-suffix-intel.d: Updated.
* testsuite/gas/i386/x86-64-suffix.d: Likewise.
opcodes/
PR binutils/26705
* i386-dis.c (print_insn): Clear modrm if not needed.
(putop): Check need_modrm for modrm.mod != 3. Don't check
need_modrm for modrm.mod == 3.
PR 26253
gas * config/obj-elf.c (obj_elf_section): Accept a numeric value for
the "o" section flag. Interpret it as a section index. Allow an
index of zero.
* doc/as.texi: Document the new behaviour.
* NEWS: Mention the new feature. Tidy entries.
* testsuite/gas/elf/sh-link-zero.s: New test.
* testsuite/gas/elf/sh-link-zero.d: New test driver.
* testsuite/gas/elf/elf.exp: Run the new test.
* testsuite/gas/elf/section21.l: Updated expected assembler
output.
bfd * elf.c (_bfd_elf_setup_sections): Do not complain about an
sh_link value of zero when the SLF_LINK_ORDER flag is set.
(assign_section_numbers): Likewise.
When the address size prefix applies to both the memory and the register
operand, we need to extract the address size prefix from the register
operand if the memory operand has no real registers, like symbol, DISP
or symbol(%rip).
NB: GCC always generates symbol(%rip) for RIP-relative addressing for
both x32 and x86-64.
Move the .code16 tests in movdir.s to movdir-16bit to show the correct
output from objdump.
PR gas/26685
* config/tc-i386.c (process_suffix): Also check the register
operand for the address size prefix if the memory operand has
no real registers.
* testsuite/gas/i386/enqcmd-16bit.d: New file.
* testsuite/gas/i386/enqcmd-16bit.s: Likewise.
* testsuite/gas/i386/movdir-16bit.d: Likewise.
* testsuite/gas/i386/movdir-16bit.s: Likewise.
* testsuite/gas/i386/enqcmd.s: Add tests with symbol and DISP.
* testsuite/gas/i386/x86-64-enqcmd.s: Likewise.
* testsuite/gas/i386/x86-64-movdir.s: Likewise.
* testsuite/gas/i386/movdir.s: Add tests with symbol and DISP.
Remove the .code16 test.
* testsuite/gas/i386/i386.exp: Run movdir-16bit and enqcmd-16bit.
* testsuite/gas/i386/x86-64-enqcmd-intel.d: Updated.
* testsuite/gas/i386/x86-64-enqcmd.d: Likewise.
* testsuite/gas/i386/x86-64-movdir-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movdir.d: Likewise.
* testsuite/gas/i386/enqcmd-intel.d: Likewise.
* testsuite/gas/i386/enqcmd.d: Likewise.
* testsuite/gas/i386/movdir-intel.d: Likewise.
* testsuite/gas/i386/movdir.d: Likewise.
* testsuite/gas/i386/x86-64-enqcmd-intel.d: Likewise.
* testsuite/gas/i386/x86-64-enqcmd.d: Likewise.
* testsuite/gas/i386/x86-64-movdir-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movdir.d: Likewise.
* config/obj-elf (elf_pseudo_table): Add attach_to_group.
(obj_elf_attach_to_group): New function.
* doc/as.texi: Document the new directive.
* NEWS: Mention the new feature.
* testsuite/gas/elf/attach-1.s: New test.
* testsuite/gas/elf/attach-1.d: New test driver.
* testsuite/gas/elf/attach-2.s: New test.
* testsuite/gas/elf/attach-2.d: New test driver.
* testsuite/gas/elf/attach-err.s: New test.
* testsuite/gas/elf/attach-err.d: New test driver.
* testsuite/gas/elf/attach-err.err: New test error output.
* testsuite/gas/elf/elf.exp: Run the new tests.
If the address prefix changes the register operand, we need to check the
register operand when the memory operand is RIP-relative.
PR gas/26685
* config/tc-i386.c (process_suffix): Check the register operand
for the address size prefix if the memory operand is symbol(%rip).
* testsuite/gas/i386/x86-64-enqcmd.s: Add tests with RIP-relative
addressing.
* testsuite/gas/i386/x86-64-movdir.s: Likewise.
* testsuite/gas/i386/x86-64-enqcmd-intel.d: Updated.
* testsuite/gas/i386/x86-64-enqcmd.d: Likewise.
* testsuite/gas/i386/x86-64-movdir-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movdir.d: Likewise.
This patch adds support for Arm's Neoverse N2 CPU to AArch64 binutils.
gas/ChangeLog:
* config/tc-aarch64.c (aarch64_cpus): Add neoverse-n2.
* doc/c-aarch64.texi: Document support for Neoverse N2.
gas * testsuite/gas/aarch64/ete.d: New test.
* testsuite/gas/aarch64/ete.s: New test.
opcodes * aarch64-opc.c: Add ETE system registers TRCEXTINSELR<0-3> and TRCRSR.
gas * testsuite/gas/aarch64/trbe-invalid.d: New test.
* testsuite/gas/aarch64/trbe-invalid.l: New test.
* testsuite/gas/aarch64/trbe-invalid.s: New test.
* testsuite/gas/aarch64/trbe.d: New test.
* testsuite/gas/aarch64/trbe.s: New test.
opcodes * aarch64-opc.c: Add TRBE system registers TRBIDR_EL1 , TRBBASER_EL1 ,
TRBLIMITR_EL1 , TRBMAR_EL1 , TRBPTR_EL1, TRBSR_EL1 and TRBTRG_EL1.
This simple follow-on patch adds a feature bit (FP16) that was missing
from the initial Neoverse V1 support.
gas/ChangeLog:
* config/tc-arm.c (arm_cpus): Add FP16 to Neoverse V1.
This simple follow-on patch groups the Neoverse cores together and adds
a missing feature bit (F16) to the entry for Neoverse V1.
gas/ChangeLog:
* config/tc-aarch64.c (aarch64_cpus): Group Neoverse cores
together, add missing F16 bit to Neoverse V1.
Emit an error instead of crashing in frag_new, handling this same as the
i386 port.
gas/
PR 26400
* config/tc-riscv.c (append_insn): If in absolute section, emit
error before add_relaxed_insn call.
* testsuite/gas/riscv/absolute-sec.d: New.
* testsuite/gas/riscv/absolute-sec.l: New.
* testsuite/gas/riscv/absolute-sec.s: New.
This patch adds support for Arm's Neoverse V1 CPU to AArch32 binutils.
gas/ChangeLog:
2020-09-24 Alex Coplan <alex.coplan@arm.com>
* config/tc-arm.c (arm_cpus): Add Neoverse V1.
* doc/c-arm.texi: Document Neoverse V1 support.
This adds support for Arm's Neoverse V1 CPU to AArch64 binutils.
gas/ChangeLog:
2020-09-24 Alex Coplan <alex.coplan@arm.com>
* config/tc-aarch64.c (aarch64_cpu_option_table): Add Neoverse V1.
* doc/c-aarch64.texi: Document Neoverse V1 support.
This adds support for Arm's Neoverse N2 CPU to AArch32 binutils. The
Neoverse N2 CPU builds AArch32 at EL0 and therefore needs support in the
AArch32 assembler.
gas/ChangeLog:
2020-09-24 Alex Coplan <alex.coplan@arm.com>
* config/tc-arm.c (arm_cpus): Add Neoverse N2.
* doc/c-arm.texi: Document -mcpu=neoverse-n2.
Add option parser for disassembler, and refine the codes of
parse register operand and disassemble register operand.
While strengthen the operands legality check of some instructions.
Co-Authored-By: Lifang Xia <lifang_xia@c-sky.com>
gas/
* config/tc-csky.c (parse_type_ctrlreg): Use function
csky_get_control_regno to operand.
(csky_get_reg_val): Likewise.
(is_reg_sp_with_bracket): Use function csky_get_reg_val
to parse operand.
(is_reg_sp): Refine.
(is_oimm_within_range): Fix, report error when operand
is not constant.
(parse_type_cpreg): Refine.
(parse_type_cpcreg): Refine.
(get_operand_value): Add handle of OPRND_TYPE_IMM5b_LS.
(md_assemble): Fix no error reporting somtimes when
operands number are not fit.
(csky_addc64): Refine.
(csky_subc64): Refine.
(csky_or64): Refine.
(v1_work_fpu_fo): Refine.
(v1_work_fpu_read): Refine.
(v1_work_fpu_writed): Refine.
(v1_work_fpu_readd): Refine.
(v2_work_addc): New function, strengthen the operands legality
check of addc.
* gas/testsuite/gas/csky/all.d : Use register number format when
disassemble register name by default.
* gas/testsuite/gas/csky/cskyv2_all.d : Likewise.
* gas/testsuite/gas/csky/trust.d: Likewise.
* gas/testsuite/gas/csky/cskyv2_ck860.d : Fix.
* gas/testsuite/gas/csky/trust.s : Fix.
opcodes/
* csky-dis.c (using_abi): New.
(parse_csky_dis_options): New function.
(get_gr_name): New function.
(get_cr_name): New function.
(csky_output_operand): Use get_gr_name and get_cr_name to
disassemble and add handle of OPRND_TYPE_IMM5b_LS.
(print_insn_csky): Parse disassembler options.
* opcodes/csky-opc.h (OPRND_TYPE_IMM5b_LS): New enum.
(GENARAL_REG_BANK): Define.
(REG_SUPPORT_ALL): Define.
(REG_SUPPORT_ALL): New.
(ASH): Define.
(REG_SUPPORT_A): Define.
(REG_SUPPORT_B): Define.
(REG_SUPPORT_C): Define.
(REG_SUPPORT_D): Define.
(REG_SUPPORT_E): Define.
(csky_abiv1_general_regs): New.
(csky_abiv1_control_regs): New.
(csky_abiv2_general_regs): New.
(csky_abiv2_control_regs): New.
(get_register_name): New function.
(get_register_number): New function.
(csky_get_general_reg_name): New function.
(csky_get_general_regno): New function.
(csky_get_control_reg_name): New function.
(csky_get_control_regno): New function.
(csky_v2_opcodes): Prefer two oprerans format for bclri and
bseti, strengthen the operands legality check of addc, zext
and sext.
This patch corrects "size" and "bitsize" in R_RISCV_RVC_* reloc howtos
so that elfnn-riscv.c:perform_relocation doesn't access past the end
of a section. I've also corrected "size" in the R_RISCV_CALL* reloc
howtos since these relocs apply to two consecutive instructions. That
caused fallout in the assembler with complaints about "fixup not
contained within frag" due to tc-riscv.c:append_insn finishing off a
frag after the auipc insn making up a "call" macro. Which is a little
rude since the CALL reloc also relocates the following jalr. Fixed by
changing the frag handling a little.
I've also changed R_RISCV_ALIGN and R_RISCV_TPREL_ADD marker reloc
howtos to look like R_RISCV_NONE, and corrected dst_mask for numerous
relocs, not that it matters very much.
bfd/
PR 26569
* elfxx-riscv.c (howto_table): Correct size and bitsize of
R_RISCV_RVC_BRANCH, R_RISCV_RVC_JUMP, and R_RISCV_RVC_LUI.
Correct size for R_RISCV_TLS_DTPMOD32, R_RISCV_TLS_DTPREL32,
R_RISCV_CALL, and R_RISCV_CALL_PLT. Make R_RISCV_TPREL_ADD and
R_RISCV_ALIGN like R_RISCV_NONE. Correct dst_mask many relocs.
gas/
* config/tc-riscv.c (append_insn): Don't tie off frags at CALL
relocs.
(riscv_call): Tie them off after the jalr.
(md_apply_fix): Zero fx_size of RELAX fixup.
Add gas and opcodes support for two xBPF-exclusive ALU operations:
SDIV (signed division) and SMOD (signed modulo), and add tests for
them in gas.
cpu/
* bpf.cpu (insn-op-code-alu): Add SDIV and SMOD.
(define-alu-insn-bin, daib): Take ISAs as an argument.
(define-alu-instructions): Update calls to daib pmacro with
ISAs; add sdiv and smod.
gas/
* testsuite/gas/bpf/alu-xbpf.d: New file.
* testsuite/gas/bpf/alu-xbpf.s: Likewise.
* testsuite/gas/bpf/alu32-xbpf.d: Likewise.
* testsuite/gas/bpf/alu32-xbpf.d: Likewise.
* testuiste/gas/bpf/bpf.exp: Run new tests.
opcodes/
* bpf-desc.c: Regenerate.
* bpf-desc.h: Likewise.
* bpf-opc.c: Likewise.
* bpf-opc.h: Likewise.
I removed a few too many parentheses in git commit 7af677524e. This
patch fixes that problem, rewriting the expression so it won't happen
again. The patch also avoids more UB with shifts of signed values.
PR 26610
* config/tc-arm.c (move_or_literal_pool): Correct extraction of
bignum. Use unsigned "v"
(is_double_a_single): Make "v" and "mantissa" unsigned. Formatting.
(double_to_single): Likewise.
* read.c (s_nop): New function. Handles the .nop directive.
(potable): Add entry for "nop".
(s_nops): Code tidy.
* read.h (s_nop): Add prototype.
* config/tc-bpf.h (md_single_noop_insn): Define.
* config/tc-mmix.h (md_single_noop_insn): Define.
* config/tc-or1k.h (md_single_noop_insn): Define.
* config/tc-s12z.c (md_assemble): Preserve the input line pointer,
rather than corrupting it.
* write.c (relax_segment): Update error message regarding
non-absolute values passed to .fill and .nops.
* NEWS: Mention the new directive.
* doc/as.texi: Document the new directive.
* doc/internals.texi: Document the new internal macros used to
implement the new directive.
* testsuite/gas/all/nop.s: New test.
* testsuite/gas/all/nop.d: New test control file.
* testsuite/gas/all/gas.exp: Run the new test.
* testsuite/gas/elf/dwarf-5-nop-for-line-table.s: New test.
* testsuite/gas/elf/dwarf-5-nop-for-line-table.d: New test
control file.
* testsuite/gas/elf/elf.exp: Run the new test.
* testsuite/gas/i386/space1.l: Adjust expected output.
When -g was used to generate DWARF gas would error out when a .debug_line
already exists. But when a .debug_info section already exists it would
simply skip generating one without warning or error. Do the same for
.debug_line. It is only an error when the user explicitly uses .loc
directives and also generates the .debug_line table itself.
The tests are unfortunately arch specific because the line table is only
generated when actual instructions have been emitted. Use i386 because
that is probably the most used architecture. Before this patch the new
dwarf-line-2 testcase would fail, with this patch it succeeds (and doesn't
try to add its own line table).
gas/ChangeLog:
* as.texi (-g): Explicitly mention when .debug_info and .debug_line
are generated for the DWARF format.
(Loc): Add that it is an error to both use a .loc directive and
generate a .debug_line yourself.
* dwarf2dbg.c (dwarf2_any_loc_directive_seen): New static variable.
(dwarf2_directive_loc): Set dwarf2_any_loc_directive_seen to TRUE.
(dwarf2_finish): Check dwarf2_any_loc_directive_seen before emitting
an error. Only create .debug_line if it is empty (or doesn't exist).
* testsuite/gas/i386/i386.exp: Add dwarf2-line-{1,2,3,4} when testing
an elf target.
* testsuite/gas/i386/dwarf2-line-{1,2,3,4}.{s,d,l}: New test files.
Add arches CK804, CK805 and CK800. CK800 is an special arch which
support all instructions for CSKYV2. Refine the cpu tables to
simplify adding a new cpu.
Co-Authored-By: Lifang Xia <lifang_xia@c-sky.com>
gas/
* config/tc-csky.c (struct csky_cpu_info): Add new members
isa_flag, features and ver.
(struct csky_cpu_feature): New.
(struct csky_cpu_version): New.
(CSKY_FEATURE_MAX): Define.
(CSKY_CPU_REVERISON_MAX): Define.
(FEATURE_DSP_EXT, FEATURE_DSP, FEATURE_MMU, FEATURE_VDSP,
FEATURE_FLOAT, FEATURE_TRUST, FEATURE_JAVA, FEATURE_SHIELD):
Define, each standard one collection of instructions.
(CSKY_FEATURES_DEF_NULL, CSKY_FEATURES_DEF_e,
CSKY_FEATURES_DEF_t, CSKY_FEATURES_DEF_f, CSKY_FEATURES_DEF_v,
CSKY_FEATURES_DEF_ef, CSKY_FEATURES_DEF_jt,
CSKY_FEATURES_DEF_efht, CSKY_FEATURES_DEF_efv,
CSKY_FEATURES_DEF_eft, CSKY_FEATURES_DEF_d,
CSKY_FEATURES_DEF_df, CSKY_FEATURES_DEF_ft,
CSKY_FEATURES_DEF_tv, CSKY_FEATURES_DEF_fv,
CSKY_FEATURES_DEF_dft, CSKY_FEATURES_DEF_dfv,
CSKY_FEATURES_DEF_ftv, CSKY_FEATURES_DEF_eftv): Define,
the features combination used by cpu.
(CSKY_CPU_REVERISON_r0p0, CSKY_CPU_REVERISON_r1p0,
CSKY_CPU_REVERISON_r2p0, CSKY_CPU_REVERISON_r3p0,
CSKY_CPU_REVERISON_RESERVED, CSKY_CPU_REVERISON_R3):
Define, version information used by cpu.
(csky_cpus): Refine, and add CK804, CK805 and CK800.
(parse_cpu): Refine.
(parse_arch): Refine.
(md_show_usage): Refine.
(md_begin): Refine.
include/
* opcode/csky.h (CSKY_ARCH_804): Define.
(CSKY_ARCH_805): Define.
(CSKY_ARCH_800): Define.
We don't support power10 on ppc32, mainly because some instructions
have 34-bit fields for which we don't have relocations on ppc32.
If you try to assemble typical code, you'll see errors saying
"reloc ... not supported by object file format". Also, on 32-bit
hosts with binutils configured without a 64-bit bfd, you'll see errors
saying "bignum invalid" when using large offsets. But let's not kill
output of prefix insns entirely on 32-bit hosts.
* config/tc-ppc.c (md_assemble): Emit prefix insn by parts when
valueT is smaller than 64 bits.
The option corresponds to GCC to control the float calling conversion,
and the value will be stored in .csky.attributes section.
Co-Authored-By: Lifang Xia <lifang_xia@c-sky.com>
gas/
* config/tc-csky.c (float_abi): New.
(md_longopts): Add mfloat-abi.
(struct sky_option_value_table): New.
(csky_float_abis): New, the possible values for -mfloat-abi.
(parse_float_abi): New funtion.
(md_show_usage): Show help information for -mfloat-abi.
(set_csky_attribute): Store float-abi value.
Link-time relaxations of branches are common for MSP430, given that GCC
can generate pessimal branch instructions, and the
-mcode-region=either/-mdata-region=either options to shuffle sections
can further change the type of branch instruction required.
These relaxations can result in invalid code when .uleb128
directives, used in the .gcc_except_table section, are used to calculate
the distance between two labels. A value for the .uleb128 directive is
calculated at assembly-time, and can't be updated at link-time, even if
relaxation causes the distance between the labels to change.
This patch adds relocations for subtract expressions in .uleb128
directives, to allow the linker to re-calculate the value of these
expressions after relaxation has been performed.
bfd/ChangeLog:
* bfd-in2.h (bfd_reloc_code_real): Add
BFD_RELOC_MSP430_{SET,SUB}_ULEB128.
* elf32-msp430.c (msp430_elf_ignore_reloc): New.
(elf_msp430_howto_table): Add R_MSP430{,X}_GNU_{SET,SUB}_ULEB128.
(msp430_reloc_map): Add R_MSP430_GNU_{SET,SUB}_ULEB128.
(msp430x_reloc_map): Add R_MSP430X_GNU_{SET,SUB}_ULEB128.
(write_uleb128): New.
(msp430_final_link_relocate): Handle R_MSP430{,X}_GNU_{SET,SUB}_ULEB128.
* libbfd.c (_bfd_write_unsigned_leb128): New.
* libbfd.h (_bfd_write_unsigned_leb128): New prototype.
Add BFD_RELOC_MSP430_{SET,SUB}_ULEB128.
* reloc.c: Document BFD_RELOC_MSP430_{SET,SUB}_ULEB128.
binutils/ChangeLog:
* readelf.c (target_specific_reloc_handling): Handle
R_MSP430{,X}_GNU_{SET,SUB}_ULEB128.
gas/ChangeLog:
* config/tc-msp430.c (msp430_insert_uleb128_fixes): New.
(msp430_md_end): Call msp430_insert_uleb128_fixes.
include/ChangeLog:
* elf/msp430.h (elf_msp430_reloc_type): Add
R_MSP430_GNU_{SET,SUB}_ULEB128.
(elf_msp430x_reloc_type): Add R_MSP430X_GNU_{SET,SUB}_ULEB128.
ld/ChangeLog:
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
* testsuite/ld-msp430-elf/uleb128.s: New test.
* testsuite/ld-msp430-elf/uleb128_430.d: New test.
* testsuite/ld-msp430-elf/uleb128_430x.d: New test.
This adds support for the Arm Cortex-R82 CPU in AArch64 GAS. For more
information about this processor, see [0].
[0] : https://developer.arm.com/ip-products/processors/cortex-r/cortex-r82
gas/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* config/tc-aarch64.c (aarch64_cpus): Add Cortex-R82.
* doc/c-aarch64.texi: Document -mcpu=cortex-r82.
This patch adds support for the system registers introduced in Armv8-R
AArch64.
gas/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* config/tc-aarch64.c (parse_sys_reg): Also pass sysreg name to
validation function.
(parse_sys_ins_reg): Likewise.
(print_operands): Pass CPU features to aarch64_print_operand().
* testsuite/gas/aarch64/v8-r-bad-sysregs.d: New test.
* testsuite/gas/aarch64/v8-r-bad-sysregs.l: Error output.
* testsuite/gas/aarch64/v8-r-bad-sysregs.s: Input.
* testsuite/gas/aarch64/v8-r-sysregs-need-arch.d: New test.
* testsuite/gas/aarch64/v8-r-sysregs-need-arch.l: Error output.
* testsuite/gas/aarch64/v8-r-sysregs.d: New test.
* testsuite/gas/aarch64/v8-r-sysregs.s: Input for previous two tests.
include/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* opcode/aarch64.h (aarch64_sys_ins_reg_supported_p): Also take
system register name in order to simplify validation for v8-R.
(aarch64_print_operand): Also take CPU feature set, as disassembly for
system registers now depends on arch variant.
opcodes/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* aarch64-dis.c (print_operands): Pass CPU features to
aarch64_print_operand().
* aarch64-opc.c (aarch64_print_operand): Use CPU features to determine
preferred disassembly of system registers.
(SR_RNG): Refactor to use new SR_FEAT2 macro.
(SR_FEAT2): New.
(SR_V8_1_A): New.
(SR_V8_4_A): New.
(SR_V8_A): New.
(SR_V8_R): New.
(SR_EXPAND_ELx): New.
(SR_EXPAND_EL12): New.
(aarch64_sys_regs): Specify which registers are only on
A-profile, add R-profile system registers.
(ENC_BARLAR): New.
(PRBARn_ELx): New.
(PRLARn_ELx): New.
(aarch64_sys_ins_reg_supported_p): Reject EL3 registers for
Armv8-R AArch64.
This patch adds the basic infrastructure needed to support Armv8-R in
AArch64 binutils: new command-line flags, new feature bits, a new BFD
architecture, and support for differentiating between architecture
variants in the disassembler.
The new command-line options added by this patch are -march=armv8-r in
GAS and -m aarch64:armv8-r in objdump.
The disassembler support is necessary since Armv8-R AArch64 introduces a
system register (VSCTLR_EL2) which shares an encoding with a different
system register (TTBR0_EL2) in Armv8-A. This also allows us to use the
correct preferred disassembly for the new DFB alias introduced in
Armv8-R.
bfd/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* archures.c (bfd_mach_aarch64_8R): New.
* bfd-in2.h: Regenerate.
* cpu-aarch64.c (bfd_aarch64_arch_v8_r): New.
(bfd_aarch64_arch_ilp32): Update tail pointer.
gas/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* config/tc-aarch64.c (aarch64_archs): Add armv8-r.
* doc/c-aarch64.texi: Document -march=armv8-r.
include/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_A): New.
(AARCH64_FEATURE_V8_R): New.
(AARCH64_ARCH_V8): Include new A-profile feature bit.
(AARCH64_ARCH_V8_R): New.
opcodes/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* aarch64-dis.c (arch_variant): New.
(determine_disassembling_preference): Disassemble according to
arch variant.
(select_aarch64_variant): New.
(print_insn_aarch64): Set feature set.
* dwarf2dbg.c (add_line_strp): New function.
(out_dir_and_file_list): Take line_seg and sizeof_offset as
arguments, Use DW_FORM_line_strp for dir and file. Call
add_line_strp and set symbol offset for DWARF2_LINE_VERSION 5.
(out_debug_line): Call out_dir_and_file_list with line_seg and
sizeof_offset.
* gas/testsuite/gas/elf/dwarf-5-file0.d: Expect indirect line
strings.
* dwarf2dbg.c (DWARF2_RNGLISTS_VERSION): New constant.
(out_debug_ranges): Add ranges_sym argument and set it.
(out_debug_rnglists): New function.
(out_debug_info): Change ranges_seg argument to ranges_sym
and use it to set DW_AT_ranges value.
(dwarf2_finish): Remove ranges_seg, add ranges_sym. For
DWARF2_VERSION 5 call out_debug_rnglists.
Older DWARF versions used DW_FORM_data4 or DW_FORM_data8 for offsets
into sections for e.g. DW_AT_stmt_list ot DW_AT_ranges. But version 4
introduced a dedicated form for such section offsets. Make sure to emit
the proper form for newer DWARF versions.
gas/ChangeLog:
* dwarf2dbg.c (out_debug_abbrev): Use DW_FORM_sec_offset for DWARF
version 4 or higher.
If bfd_vma is 32 bits, gcc complains about shift counts exceeding
width of the type.
* config/tc-pdp11.c (md_number_to_chars): Condition nbytes=8 code
on BFD64.
Move divul and divsl to CSKYV2_ISA_3E3R3 instruction set, which is
enabled by ck803r3, and it's still a part of enhance DSP instruction
set.
gas/
* config/tc-csky.c (csky_cpus): Add ck803r3.
(CSKY_ISA_803R3): Define.
(CSKY_ISA_803R2): Refine, use CSKY_ISA_803R1.
include/
* opcode/csky.h (CSKYV2_ISA_3E3R3): Define.
opcodes/
* csky-opc.h (csky_v2_opcodes): Move divul and divsl
to CSKYV2_ISA_3E3R3 instruction set.
PR 26420
PR 26421
PR 26425
PR 26427
* config/tc-arm.c (struct arm_it): Make size, size_req, cond and
uncond_value unsigned.
(parse_vfp_reg_list): Make setmask unsigned, vpr_str_len size_t.
(parse_big_immediate): Cast generic_bignum elements to unsigned.
(encode_thumb32_immediate): Shift left 0xffU.
(double_to_single): Make sign unsigned. Tidy.
(move_or_literal_pool): Cast LITTLE_NUM elements to uint64_t or
valueT.
(vfp_or_neon_is_neon): Adjust inst.uncond_value expression.
(md_assemble): Likewise.
(handle_pred_state): Make cond unsigned.
(thumb32_negate_data_op): Make variables unsigned.
(md_apply_fix): Make value and newval unsigned, adjust uses.
This also fixes the packing of the nibble buffer, which contains
rubbish in the top 4 bits of each element.
PR 26510
* config/tc-z8k.c (buffer): Use unsigned char.
(apply_fix): Use unsigned char* pointers.
(build_bytes): Likewise and mask nibbles when packing.
When looking at the UB errors, I noticed that cbitb_test.d disassembly
wasn't reproducing the input assembly. That turned out to be an error
in make_argument case arg_cr. This fixes that and makes some general
tidies.
opcodes/
* cr16-dis.c: Formatting.
(parameter): Delete struct typedef. Use dwordU instead
throughout file.
(make_argument <arg_idxr>): Simplify detection of cbitb, sbitb
and tbitb.
(make_argument <arg_cr>): Extract 20-bit field not 16-bit.
gas/
* testsuite/gas/cr16/cbitb_test.d: Update expected output.
* testsuite/gas/cr16/cbitw_test.d: Likewise.
* testsuite/gas/cr16/sbitb_test.d: Likewise.
* testsuite/gas/cr16/sbitw_test.d: Likewise.
* testsuite/gas/cr16/storb_test.d: Likewise.
* testsuite/gas/cr16/storw_test.d: Likewise.
* testsuite/gas/cr16/tbitb_test.d: Likewise.
* testsuite/gas/cr16/tbitw_test.d: Likewise.
Always use unsigned constants in expressions generating masks. The
following trys mightily to avoid UB (but hits it anyway with bits=32
and 0x7fffffff << 1), and worse, for 32-bit int, 64-bit long, bits=32
doesn't generate 0xffffffff.
max = ((((1 << (bits - 1)) - 1) << 1) | 1);
results in -1, or max = 0xffffffffffffffff.
This patch fixes that problem, a possible shift exponent of -1U,
removes some dead code, and makes general tidies.
PR26437
PR26438
* config/tc-cr16.c: Include limits.h, formatting.
(CR16_PRINT): Wrap params in parentheses. Remove parens from uses
throughout file.
(getconstant): Handle zero nbits.
(print_operand): Simplify handling of index regs.
(check_range): Use int32_t variables. Correct range checks.
parse_args uses getopt_long_only so it can handle long options both
with double and single dash. But this means that some single dash
options like -gdwarf-1 don't generate an error (unlike --gdwarf-1).
This is especially confusing since there is also --gdwarf2, but no
--gdwarf4 (it is --gdwarf-4). When giving -gdwarf4 the option is
silently interpreted as -g (which set dwarf_version to 2). This causes
some confusion for people who don't expect this and suddenly get
DWARF2 instead of DWARF4 as they might expect.
So make it so that the -gdwarf<unknown> creates an error, just like
--gdwarf<unknown> would.
Besides avoiding the UB, this also makes right shifts inside
expression symbols unsigned, consistent with the way gas evaluates
expressions in source.
PR 26448
* symbols.c: Include limits.h.
(resolve_symbol_value <O_left_shift, O_right_shift>): Do an
unsigned shift. Warn if shift count larger than valueT size.
This patch adds support for xBPF, another ISA targetting the BPF
virtual architecture. For now, the primary difference between eBPF
and xBPF is that xBPF supports indirect calls through the
'call %reg' form of the call instruction.
bfd/
* archures.c (bfd_mach_xbpf): Define.
* bfd-in2.h: Regenerate.
* cpu-bpf.c (bfd_xbpf_arch) New.
(bfd_bpf_arch) Update next in list field to point to xbpf arch.
cpu/
* bpf.cpu (arch bpf): Add xbpf mach and isas.
(define-xbpf-isa) New pmacro.
(all-isas) Add xbpfle,xbpfbe.
(endian-isas): New pmacro.
(mach xbpf): New.
(model xbpf-def): Likewise.
(h-gpr): Add xbpf mach.
(f-dstle, f-srcle, dstle, srcle): Add xbpfle isa.
(f-dstbe, f-srcbe, dstbe, srcbe): Add xbpfbe isa.
(define-alu-insn-un): Use new endian-isas pmacro.
(define-alu-insn-bin, define-alu-insn-mov): Likewise.
(define-endian-insn, define-lddw): Likewise.
(dlind, dxli, dxsi, dsti): Likewise.
(define-cond-jump-insn, define-call-insn): Likewise.
(define-atomic-insns): Likewise.
gas/
* config/tc-bpf.c: Add option -mxbpf to select xbpf isa.
* testsuite/gas/bpf/indcall-1.d: New file.
* testsuite/gas/bpf/indcall-1.s: Likewise.
* testsuite/gas/bpf/indcall-bad-1.l: Likewise.
* testsuite/gas/bpf/indcall-bad-1.s: Likewise.
* testsuite/gas/bpf/bpf.exp: Run new tests.
opcodes/
* bpf-desc.c: Regenerate.
* bpf-desc.h: Likewise.
* bpf-opc.c: Likewise.
* bpf-opc.h: Likewise.
* disassemble.c (disassemble_init_for_target): Set bits for xBPF
ISA when appropriate.
Some versions of gcc with -Werror=format-overflow complain about using
a perfectly good 7 char buffer for "r%dr%d" when the int is between 0
and 64, apparently not seeing the value range.
note: __builtin___sprintf_chk output between 5 and 24 bytes into a destination of size 7
* config/tc-arc.c (declare_register_set): Avoid false positive
format-overflow warning.
* config/tc-epiphany.c (md_assemble): Likewise.
* config/tc-mips.c (md_begin): Likewise.
* config/tc-mmix.c (mmix_md_begin): Likewise.
* config/tc-nds32.c (nds32_elf_append_relax_relocs): Avoid false
positive "may be used uninitialized" warning.
A number of the tic54x tests were failing, and I thought it worth
investigating since the target makes use of a lot of hash tables, and
we've just changed gas hash tables. It turns out none of the gas
failures were due to hashing.
* config/tc-tic54x.c (stag_add_field_symbols): Don't free "name"
in case where it isn't copied.
* config/tc-tic54x.h (LOCAL_LABELS_FB): Undef.
* testsuite/gas/tic54x/field.d: Dump section contents and symbols
rather than disassembling.
* testsuite/gas/tic54x/set.d: Adjust for newer disassembly.
gas handles local symbols specially in order to save memory, but the
implementation using two separate hash tables is inefficient,
particularly the scheme of duplicating a struct local_symbol when it
needs to be converted to a full struct symbol. Also, updating symbol
pointers with LOCAL_SYMBOL_CHECK is horrible and has led to some hard
to find bugs.
This changes the implementation to use a single hash table and avoids
another copy of the symbol name in symbol_entry_t. When converting
local symbols the struct local_symbol memory is reused. Not only
does that save memory, but there is no need to twiddle symbol pointers
with LOCAL_SYMBOL_CHECK.
Assembling gcc-10 -g -Og gold/powerpc.cc output shows the following:
old:
symbol table hash statistics:
1371192 searches
1290398 collisions
143585 elements
262139 table size
mini local symbol table hash statistics:
2966204 searches
2707489 collisions
523533 elements
1048573 table size
523533 mini local symbols created, 140453 converted
new:
symbol table hash statistics:
2828883 searches
2453138 collisions
526665 elements
1048573 table size
523533 mini local symbols created, 140453 converted
* symbols.c (struct local_symbol): Add "hash" entry. Reorder fields.
Delete union. Adjust code throughout file.
(struct symbol): Add "hash", "name" and "x" entries. Reorder fields.
Split off some to..
(struct xsymbol): ..this. New struct. Adjust code throughout file
accessing these fields.
(struct symbol_entry): Delete.
(union symbol_entry): New.
(hash_symbol_entry): Adjust for symbol_entry_t change.
(symbol_entry_find): Likewise.
(eq_symbol_entry): Compare hash values too.
(symbol_entry_alloc): Delete.
(local_symbol_converted_p, local_symbol_mark_converted): Delete.
(local_symbol_get_real_symbol, local_symbol_set_real_symbol): Delete.
(local_hash): Delete.
(abs_symbol_x, dot_symbol_x): New static var.
(symbol_init): New function.
(symbol_create): Rewrite.
(LOCAL_SYMBOL_CHECK): Delete. Replace uses throughout with simple
test of flags.local_symbol.
(local_symbol_make): Adjust for struct local_symbol changes.
(local_symbol_convert): Rewrite. Adjust all callers.
(symbol_table_insert): Simplify.
(symbol_clone): Comment on local sym cloning. Handle split symbol
struct.
(get_real_sym): Delete. Remove all uses.
(symbol_find_exact_noref): Simplify.
(resolve_local_symbol): Don't resolve non-locals.
(S_SET_SEGMENT): Don't special case reg_section.
(S_SET_NAME): Set both name and bsym->name.
(symbol_mark_resolved, symbol_resolved_p): Simplify.
(symbol_symbolS): Update comment.
(symbol_begin): Don't create local_hash. Adjust abs_symbol setup.
(dot_symbol_init): Adjust dot_symbol setup.
(symbol_print_statistics): Delete local_hash stats.
Get rid of sy_ prefix, and some unused fields.
* symbols.c (struct symbol_flags): Rename sy_volatile to volatil,
and remove sy_ from other field names. Update throughout.
(struct symbol): Remove sy_ from field names. Delete unused
TARGET_SYMBOL_FIELDS. Update throughout file. Move after..
(struct local_symbol): ..here. Remove lsy_ from field names.
Delete unused TC_LOCAL_SYMFIELD_TYPE. Update throughout file.
(local_symbol_resolved_p, local_symbol_mark_resolved): Delete.
Expand uses throughout file.
(local_symbol_get_frag, local_symbol_set_frag): Likewise.
(symbol_new): Move symbol_table_frozen test to..
(symbol_append): ..here, and..
(symbol_insert): ..here.
(resolve_symbol_value, symbol_relc_make_expr): White space fixes.
(HANDLE_XADD_OPT1, HANDLE_XADD_OPT2): Likewise.
* config/obj-coff.h (RESOLVE_SYMBOL_REDEFINITION): Update.
gas/
* config/tc-csky.c (csky_insn_info): Add member last_isize.
(md_assemble): Assign value to csky_insn.last_isize.
* testsuite/gas/csky/enhance_dsp.d: Test bloop's two operands form.
* testsuite/gas/csky/enhance_dsp.s: Likewise.
opcodes/
* csky-opc.h (csky_v2_opcodes): Add two operands form for bloop.
* ecoff.c (INIT_VARRAY): Use htab_t.
(add_string): Likewise.
(ecoff_read_begin_hook): Use new str_htab_create.
(get_tag): Use htab_t.
(add_file): Likewise.
The first of a patch series deleting the gas/hash.c hash table
implementation and instead using libiberty/hashtab.c hash tables in
gas.
* as.h: Include hashtab.h.
* hash.c (htab_insert): New.
(htab_print_statistics): Likewise.
* hash.h (htab_insert): Likewise.
(htab_print_statistics): Likewise.
These shouldn't be optional. The record form of vector instructions
set CR6, giving an expectation that omitting BF should be the same as
specifying CR6.
opcodes/
* ppc-opc.c (powerpc_opcodes): Replace OBF with BF for vcmpsq,
vcmpuq and xvtlsbb.
gas/
* testsuite/gas/ppc/int128.s: Correct vcmpuq.
* testsuite/gas/ppc/int128.d: Update.
* testsuite/gas/ppc/xvtlsbb.d: Update.
The xvcvbf16sp mnemonic has been renamed to xvcvbf16spn, to be consistent
with the other non-signaling conversion instructions which all end with "n".
opcodes/
* ppc-opc.c (powerpc_opcodes) <xvcvbf16sp>: Rename from this...
<xvcvbf16spn>: ...to this.
gas/
* testsuite/gas/ppc/vsx4.s: Update test to use new mnemonic.
* testsuite/gas/ppc/vsx4.d: Likewise.
This patch fixes an internal error in GAS when defining a section using
a symbol that has already been named but not defined. For a minimal
reproducer, try the following input:
a=b
.sect a
The problem is that obj_elf_change_section() happily reuses the symbol
"a" created by equals() without clearing the sy_value field: prior to
this patch, it just set bsym. This caused a problem when attempting to
resolve the section symbol, since resolve_symbol_value() ended up
resolving the symbol as if it were the original symbol created by
equals(), which ends up leaving the section symbol in the undefined
section instead of in section a, hence the call to abort() in
S_SET_SEGMENT().
gas/ChangeLog:
* config/obj-elf.c (obj_elf_change_section): When repurposing an
existing symbol, ensure that we set sy_value as per other (fresh)
section symbols.
* testsuite/gas/elf/elf.exp: Add new test.
* testsuite/gas/elf/section-symbol-redef.d: New test.
* testsuite/gas/elf/section-symbol-redef.s: Input for test.
* config/tc-arm.c (do_neon_cvt_1): Parse vcvtne as vcvt-ne for
NS_FD shape when MVE is present
* testsuite/gas/arm/mve-vcvtne-it-bad.d: New test.
* testsuite/gas/arm/mve-vcvtne-it-bad.l: New test.
* testsuite/gas/arm/mve-vcvtne-it-bad.s: New test.
* testsuite/gas/arm/mve-vcvtne-it.d: New test.
* testsuite/gas/arm/mve-vcvtne-it.s: New test.
This patch adds support for the system registers introduced in the
Armv8-A MPAM extension.
See https://developer.arm.com/documentation/ddi0598/latest for the
Arm ARM supplement documenting this extension.
gas/ChangeLog:
* testsuite/gas/aarch64/mpam-bad.d: New test.
* testsuite/gas/aarch64/mpam-bad.l: Error output.
* testsuite/gas/aarch64/mpam-bad.s: Input.
* testsuite/gas/aarch64/mpam.d: New test.
* testsuite/gas/aarch64/mpam.s: Input.
opcodes/ChangeLog:
* aarch64-opc.c (aarch64_sys_regs): Add MPAM registers.
This patch fixes an assertion failure on long system register operands
in the AArch64 backend. See the new testcase for an input which
reproduces the issue.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sys_reg): Don't assert when parsing
a long system register.
(parse_sys_ins_reg): Likewise.
(sysreg_hash_insert): New.
(md_begin): Use sysreg_hash_insert() to ensure all system
registers are no longer than the maximum length at startup.
* testsuite/gas/aarch64/invalid-sysreg-assert.d: New test.
* testsuite/gas/aarch64/invalid-sysreg-assert.l: Error output.
* testsuite/gas/aarch64/invalid-sysreg-assert.s: Input.
include/ChangeLog:
* opcode/aarch64.h (AARCH64_MAX_SYSREG_NAME_LEN): New.
Prior to this commit, on an input such as "88888888888:", GAS hits a
signed integer overflow and likely an assertion failure. I see:
$ echo "88888888888:" | bin/aarch64-none-elf-as
{standard input}: Assembler messages:
{standard input}:1: Internal error in fb_label_name at ../gas/symbols.c:2049.
Please report this bug.
To fix this issue, I've taken two steps:
1. Change the type used for processing local labels in
read_a_source_file() from int to long, to allow representing more
local labels, and also since all uses of this variable (temp) are
actually of type long.
2. Detect if we would overflow and bail out with an error message
instead of actually overflowing and hitting the assertion in
fb_label_name().
gas/ChangeLog:
2020-08-06 Alex Coplan <alex.coplan@arm.com>
* read.c (read_a_source_file): Use long for local labels, detect
overflow and raise an error for overly-long labels.
* testsuite/gas/all/gas.exp: Add local-label-overflow test.
* testsuite/gas/all/local-label-overflow.d: New test.
* testsuite/gas/all/local-label-overflow.l: Error output.
* testsuite/gas/all/local-label-overflow.s: Input.
Problem found by Tadashi G. Takaoka.
2020-08-04 Christian Groessler <chris@groessler.org>
Tadashi G. Takaoka <tadashi.g.takaoka@gmail.com>
* z8kgen.c (opt): Fix "sout imm16,rs" and "soutb imm16,rbs"
opcodes (special "out" to absolute address).
* z8k-opc.h: Regenerate.
2020-08-04 Christian Groessler <chris@groessler.org>
* gas/testsuite/gas/z8k/inout.d: Adapt to correct encoding of
"sout/soutb #imm,reg"
For DWARF4 DW_AT_high_pc can be expressed as constant offset from
DW_AT_low_pc which saves a relocation. Use DW_FORM_udate (uleb128)
to keep the constant value as small as possible.
gas/ChangeLog:
* dwarf2dbg.c (out_debug_abbrev): When DWARF2_VERSION >= 4, use
DW_FORM_udata for DW_AT_high_pc.
(out_debug_info): Use emit_leb128_expr for DW_AT_high_pc, when
DWARF2_VERSION >= 4.
* read.c (emit_leb128_exp): No longer static.
* read.h (emit_leb128_exp): Define.
For DWARF5 the zero file list entry in the .debug_line table represents
the compile unit main file. It can be set with .file 0 when -gdwarf-5
is given. But since this directive is illegal for older versions, this
is almost never set. To make sure it is always set (so DW_AT_name of
the compile unit can be set) use file (and dir) 1 if that is defined
(otherwise fall back to pwd, to match DW_AT_comp_dir).
gas/ChangeLog:
* gas/dwarf2dbg.c (out_dir_and_file_list): For DWARF5 emit at
least one directory if there is at least one file. Use dirs[1]
if dirs[0] is not set, or if there is no dirs[1] the current
working directory. Use files[1] filename, when files[0] filename
isn't set.
DWARF5 CU headers have a new unit type field and move the abbrev offset
to the end of the header.
gas/ChangeLog:
* dwarf2dbg.c (out_debug_info): Emit unit type and abbrev offset
for DWARF5.
* gas/testsuite/gas/elf/dwarf-4-cu.d: New file.
* gas/testsuite/gas/elf/dwarf-4-cu.s: Likewise.
* gas/testsuite/gas/elf/dwarf-5-cu.d: Likewise.
* gas/testsuite/gas/elf/dwarf-5-cu.s: Likewise.
* testsuite/gas/elf/elf.exp: Run dwarf-4-cu and dwarf-5-cu.
The MSP430 GAS option "-md" is supposed to indicate that the CRT startup
code should copy data from ROM to RAM at startup. However, this option
has no effect; GAS handles the related behaviour automatically by
looking for the presence of certain symbols in the input file.
gas/ChangeLog:
* config/tc-msp430.c (OPTION_MOVE_DATA): Remove.
(md_parse_option): Remove case for OPTION_MOVE_DATA.
(md_longopts): Remove "md" entry.
(md_show_usage): Likewise.
GDB currently doesn't build on 32-bit Solaris:
* On Solaris 11.4/x86:
In file included from /usr/include/sys/procfs.h:26,
from /vol/src/gnu/gdb/hg/master/dist/gdb/i386-sol2-nat.c:24:
/usr/include/sys/old_procfs.h:31:2: error: #error "Cannot use procfs in the large file compilation environment"
#error "Cannot use procfs in the large file compilation environment"
^~~~~
* On Solaris 11.3/x86 there are several more instances of this.
The interaction between procfs and large-file support historically has
been a royal mess on Solaris:
* There are two versions of the procfs interface:
** The old ioctl-based /proc, deprecated and not used any longer in
either gdb or binutils.
** The `new' (introduced in Solaris 2.6, 1997) structured /proc.
* There are two headers one can possibly include:
** <procfs.h> which only provides the structured /proc, definining
_STRUCTURED_PROC=1 and then including ...
** <sys/procfs.h> which defaults to _STRUCTURED_PROC=0, the ioctl-based
/proc, but provides structured /proc if _STRUCTURED_PROC == 1.
* procfs and the large-file environment didn't go well together:
** Until Solaris 11.3, <sys/procfs.h> would always #error in 32-bit
compilations when the large-file environment was active
(_FILE_OFFSET_BITS == 64).
** In both Solaris 11.4 and Illumos, this restriction was lifted for
structured /proc.
So one has to be careful always to define _STRUCTURED_PROC=1 when
testing for or using <sys/procfs.h> on Solaris. As the errors above
show, this isn't always the case in binutils-gdb right now.
Also one may need to disable large-file support for 32-bit compilations
on Solaris. config/largefile.m4 meant to do this by wrapping the
AC_SYS_LARGEFILE autoconf macro with appropriate checks, yielding
ACX_LARGEFILE. Unfortunately the macro doesn't always succeed because
it neglects the _STRUCTURED_PROC part.
To make things even worse, since GCC 9 g++ predefines
_FILE_OFFSET_BITS=64 on Solaris. So even if largefile.m4 deciced not to
enable large-file support, this has no effect, breaking the gdb build.
This patch addresses all this as follows:
* All tests for the <sys/procfs.h> header are made with
_STRUCTURED_PROC=1, the definition going into the various config.h
files instead of having to make them (and sometimes failing) in the
affected sources.
* To cope with the g++ predefine of _FILE_OFFSET_BITS=64,
-U_FILE_OFFSET_BITS is added to various *_CPPFLAGS variables. It had
been far easier to have just
#undef _FILE_OFFSET_BITS
in config.h, but unfortunately such a construct in config.in is
commented by config.status irrespective of indentation and whitespace
if large-file support is disabled. I found no way around this and
putting the #undef in several global headers for bfd, binutils, ld,
and gdb seemed way more invasive.
* Last, the applicability check in largefile.m4 was modified only to
disable largefile support if really needed. To do so, it checks if
<sys/procfs.h> compiles with _FILE_OFFSET_BITS=64 defined. If it
doesn't, the disabling only happens if gdb exists in-tree and isn't
disabled, otherwise (building binutils from a tarball), there's no
conflict.
What initially confused me was the check for $plugins here, which
originally caused the disabling not to take place. Since AC_PLUGINGS
does enable plugin support if <dlfcn.h> exists (which it does on
Solaris), the disabling never happened.
I could find no explanation why the linker plugin needs large-file
support but thought it would be enough if gld and GCC's lto-plugin
agreed on the _FILE_OFFSET_BITS value. Unfortunately, that's not
enough: lto-plugin uses the simple-object interface from libiberty,
which includes off_t arguments. So to fully disable large-file
support would mean also disabling it in libiberty and its users: gcc
and libstdc++-v3. This seems highly undesirable, so I decided to
disable the linker plugin instead if large-file support won't work.
The patch allows binutils+gdb to build on i386-pc-solaris2.11 (both
Solaris 11.3 and 11.4, using GCC 9.3.0 which is the worst case due to
predefined _FILE_OFFSET_BITS=64). Also regtested on
amd64-pc-solaris2.11 (again on Solaris 11.3 and 11.4),
x86_64-pc-linux-gnu and i686-pc-linux-gnu.
config:
* largefile.m4 (ACX_LARGEFILE) <sparc-*-solaris*|i?86-*-solaris*>:
Check for <sys/procfs.h> incompatilibity with large-file support
on Solaris.
Only disable large-file support and perhaps plugins if needed.
Set, substitute LARGEFILE_CPPFLAGS if so.
bfd:
* bfd.m4 (BFD_SYS_PROCFS_H): New macro.
(BFD_HAVE_SYS_PROCFS_TYPE): Require BFD_SYS_PROCFS_H.
Don't define _STRUCTURED_PROC.
(BFD_HAVE_SYS_PROCFS_TYPE_MEMBER): Likewise.
* elf.c [HAVE_SYS_PROCFS_H] (_STRUCTURED_PROC): Don't define.
* configure.ac: Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>.
* configure, config.in: Regenerate.
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
binutils:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gas:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gdb:
* proc-api.c (_STRUCTURED_PROC): Don't define.
* proc-events.c: Likewise.
* proc-flags.c: Likewise.
* proc-why.c: Likewise.
* procfs.c: Likewise.
* Makefile.in (INTERNAL_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* configure, config.in: Regenerate.
gdbserver:
* configure, config.in: Regenerate.
gdbsupport:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* common.m4 (GDB_AC_COMMON): Use BFD_SYS_PROCFS_H to check for
<sys/procfs.h>.
* Makefile.in: Regenerate.
* configure, config.in: Regenerate.
gnulib:
* configure.ac: Run ACX_LARGEFILE before gl_EARLY.
* configure: Regenerate.
gprof:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
ld:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
Make the MIPS/IRIX naming of local section symbols consistent between
files produced by generic ELF code and ELF linker code, complementing
commit 174fd7f955 ("New bfd elf hook: force naming of local section
symbols"), <https://sourceware.org/ml/binutils/2004-02/msg00072.html>.
Local section symbols have no names in the standard ELF gABI, however
the lack of a name causes problems with IRIX's MIPSpro linker. To work
around the issue we give them names, however we do that in generic ELF
code only, based on what the `elf_backend_name_local_section_symbols'
hook returns if present. That makes objects created by GAS or `objdump'
work correctly, however not ones created by `ld -r'. That would not
normally cause issues with IRIX systems using GAS and `objdump' only
with the MIPSpro linker, however if GNU LD was used for whatever reason
in producing objects later fed to IRIX's MIPSpro linker, then things
would break.
Modify ELF linker code accordingly then, using the same hook. Adjust
the `ld-elf/64ksec-r' test accordingly so that it also accepts a section
symbol with a name.
Also modify the hook itself so that only actual ET_REL objects have
names assigned to local section symbols. Other kinds of ELF files are
not ever supposed to be relocated with the MIPSpro linker, so we can
afford producing more standard output.
Add suitable GAS, LD and `objcopy' test cases to the relevant testsuites
to keep these tools consistently verified. This change also fixes:
FAIL: objcopy executable (pr25662)
across MIPS targets using the IRIX compatibility mode.
bfd/
* elflink.c (bfd_elf_final_link): Give local symbols a name if
so requested.
* elfxx-mips.c (_bfd_mips_elf_name_local_section_symbols): Only
return TRUE if making ET_REL output.
binutils/
* testsuite/binutils-all/mips/global-local-symtab-sort-o32.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-o32t.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-n32.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-n32t.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-n64.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-n64t.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-final-o32.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-final-n32.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-final-n64.d:
New test.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/global-local-symtab-sort-o32.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-o32t.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-n32.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-n32t.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-n64.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-n64t.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-elf/sec64k.exp: Also accept a section symbol with
a name.
* testsuite/ld-mips-elf/global-local-symtab-sort-o32.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-o32t.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-n32.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-n32t.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-n64.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-n64t.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-final-o32.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-final-n32.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-final-n64.d: New
test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Correct ELF linker code so as to set the `sh_info' value of the static
symbol table section according to the section symbols vs other symbols
split where required by the selection of the IRIX compatibility mode for
MIPS target. Add a `elf_backend_elfsym_local_is_section' hook for that
purpose, returning TRUE if it is only STB_LOCAL/STT_SECTION symbols that
are to be considered local for the purpose of this split rather than all
STB_LOCAL symbols.
We do it already in generic ELF code, and have done it since 1993, with
the `elf_backend_sym_is_global' hook, affecting GAS and `objcopy', so
these tools produce correct ELF output in the IRIX compatibility mode,
however if such output is fed as input to `ld -r', then the linker's
output is no longer valid for that mode. The relevant changes to
generic ELF code are:
commit 062189c6ea
Author: Ian Lance Taylor <ian@airs.com>
Date: Thu Nov 18 17:12:47 1993 +0000
and:
commit 6e07e54f1b
Author: Ian Lance Taylor <ian@airs.com>
Date: Thu Jan 6 20:01:42 1994 +0000
(split across two GIT commits likely due to repository conversion
peculiarities).
The `elf_backend_sym_is_global' hook however operates on BFD rather than
ELF symbols, making it unsuitable for the ELF linker as the linker does
not convert any symbol tables processed into the BFD format. Converting
the hook to operate on ELF symbols would in principle be possible, but
it would still require a considerable rewrite of `bfd_elf_final_link' to
adapt to the interface.
Therefore, especially given that no new use for the IRIX compatibility
mode is expected, minimize changes made to the ELF linker code and just
add an entirely new hook, and wire it in the o32 and n32 MIPS backends
accordingly; the n64 backend never uses the IRIX compatibility mode.
Since we have no coverage here at all add suitable GAS, LD and `objcopy'
test cases to the relevant testsuites to keep these tools consistently
verified.
bfd/
* elf-bfd.h (elf_backend_data): Add
`elf_backend_elfsym_local_is_section' member.
* elfxx-target.h (elf_backend_elfsym_local_is_section): New
macro.
(elfNN_bed): Add `elf_backend_elfsym_local_is_section' member.
* elflink.c (bfd_elf_final_link): Use it to determine whether
set the `.symtab' section's `sh_info' value to the index of the
first non-local or non-section symbol.
* elf32-mips.c (mips_elf32_elfsym_local_is_section): New
function.
(elf_backend_elfsym_local_is_section): New macro.
* elfn32-mips.c (mips_elf_n32_elfsym_local_is_section): New
function.
(elf_backend_elfsym_local_is_section): New macro.
binutils/
* testsuite/binutils-all/mips/global-local-symtab-o32.d: New
test.
* testsuite/binutils-all/mips/global-local-symtab-o32t.d: New
test.
* testsuite/binutils-all/mips/global-local-symtab-n32.d: New
test.
* testsuite/binutils-all/mips/global-local-symtab-n32t.d: New
test.
* testsuite/binutils-all/mips/global-local-symtab-n64.d: New
test.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/global-local-symtab-o32.d: New test.
* testsuite/gas/mips/global-local-symtab-o32t.d: New test.
* testsuite/gas/mips/global-local-symtab-n32.d: New test.
* testsuite/gas/mips/global-local-symtab-n32t.d: New test.
* testsuite/gas/mips/global-local-symtab-n64.d: New test.
* testsuite/gas/mips/global-local-symtab.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/global-local-symtab-o32.d: New test.
* testsuite/ld-mips-elf/global-local-symtab-o32t.d: New test.
* testsuite/ld-mips-elf/global-local-symtab-n32.d: New test.
* testsuite/ld-mips-elf/global-local-symtab-n32t.d: New test.
* testsuite/ld-mips-elf/global-local-symtab-n64.d: New test.
* testsuite/ld-mips-elf/global-local-symtab.ld: New test linker
script.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Since (%bp)/(%ebp)/(%rbp) are encoded as 0(%bp)/0(%ebp)/0(%rbp), use
disp32/disp16 on 0(%bp)/0(%ebp)/0(%rbp) for {disp32}.
Note: Since there is no disp32 on 0(%bp), use disp16 instead.
PR gas/26305
* config/tc-i386.c (build_modrm_byte): Use disp32/disp16 on
(%bp)/(%ebp)/(%rbp) for {disp32}.
* doc/c-i386.texi: Update {disp32} documentation.
* testsuite/gas/i386/pseudos.s: Add (%bp)/(%ebp) tests.
* testsuite/gas/i386/x86-64-pseudos.s: Add (%ebp)/(%rbp) tests.
* testsuite/gas/i386/pseudos.d: Updated.
* testsuite/gas/i386/x86-64-pseudos.d: Likewise.
Define a helper variable for IRIX/non-IRIX test selection and use it
with the PR 14798 test case.
gas/
* testsuite/gas/mips/mips.exp: Use a helper variable for
IRIX/non-IRIX test selection.
This reverts commit 04c662e2b6.
In my underlying suggestion I neglected the fact that in those
cases (,%eiz,1) is the only visible indication that 32-bit
addressing is in effect.
This reverts commit 19449d7c67, addressing
the issue that was run into back then: There was no relationship to i686-*
and/or cross builds on 64-bit hosts. The sole problem was the use of / as
as comment character in certain ELF targets. Instead of division, use a
comparison operation.
At the same time also revert the ELF related part of 99c2d522f7 ("x86:
Update assembler tests for non-ELF targets") by replacing the construct
that's problematic for non-ELF, and by adding the "#pass" patterns to
the expected output files to cover for the tail padding generated into
COFF output.
Ever since commit 4d7206a284 ("Rework MIPS macro relaxation, fix string
merging bug"), <https://sourceware.org/ml/binutils/2004-01/msg00248.html>,
`prev_reloc_op_frag' has only been set and never used. Remove it then.
gas/
* config/tc-mips.c (prev_reloc_op_frag): Remove variable.
(my_getSmallExpression): Adjust accordingly.
PR gas/4572
When / is a comment character, its use as binary "divide" operator needs
escaping by a backslash. Besides the scrubber needing to support this
(addressed in an earlier change), there are also a few provisions needed
in target specific operator handling.
As the spec calls for % and * to also be escaped because of being
"overloaded", also recognize these, despite the overloading there not
really preventing their use as operators in most (%) or all (*) cases,
given the way how the rest of the assembler works.
To bring source and testsuite in line, also drop the TE_I386AIX part of
the respective conditional, as i?86-*-aix* support had been removed a
while ago.
PR gas/4572
Generalize what ab1fadc6b2 ("PR22714, Assembler preprocessor loses
track of \@") did to always honor escaped comment chars. Use this then
to support escaped /, %, and * operators on x86, when / is a comment
char (to match the Sun assembler's behavior).
Various provisions exist for insns to be placed in the absolute section,
yet actually trying to do so didn't work. While data emission (of non-
zero values) is not allowed by generic code, I think this functionality
is useful for the programmer to be able to determine the size of insns.
Therefore, rather than turning the silnet failure into a verbose one,
make things mostly work; the one class of insns not supported (yet) are
branches (JMP and Jcc) with dynamically determined displacement widths.
In this one case, an error now gets reported instead of silently
ignoring the code.
Also avoid recording ISA / feature usage for insns emitted to the
absolute section.
Change
67 48 8b 1c 25 ef cd ab 89 mov 0x89abcdef(,%eiz,1),%rbx
to
67 48 8b 1c 25 ef cd ab 89 mov 0x89abcdef,%rbx
in AT&T syntax and
67 48 8b 1c 25 ef cd ab 89 mov rbx,QWORD PTR [eiz*1+0x89abcdef]
to
67 48 8b 1c 25 ef cd ab 89 mov rbx,QWORD PTR ds:0x89abcdef
in Intel syntax.
gas/
PR gas/26237
* testsuite/gas/i386/evex-no-scale-64.d: Updated.
* testsuite/gas/i386/addr32.d: Likewise.
* testsuite/gas/i386/x86-64-addr32-intel.d: Likewise.
* testsuite/gas/i386/x86-64-addr32.d: Likewise.
opcodes/
PR gas/26237
* i386-dis.c (OP_E_memory): Don't display eiz with no scale
without base nor index registers.
* write.c (create_note_reloc): Add desc2_size parameter. Zero out
the addend field of REL relocations. Store the full addend into
the note for REL relocations.
The value chosen for the 16-/32-bit immediate cases didn't work well
with the subsequent insn's REX prefix - we ought to pick a value the
upper two bytes of which evaluate to a 2-byte insn. Bump the values
accordingly, allowing the subsequent insn to actually have the intended
REX.W.
"Unambiguous" is is in particular taking as reference the assembler,
which also accepts certain insns - despite them allowing for varying
operand size, and hence in principle being ambiguous - without any
suffix. For example, from the very beginning of the life of x86-64 I had
trouble understanding why a plain and simple RET had to be printed as
RETQ. In case someone really used the 16-bit form, RETW disambiguates
the two quite fine.
Since the addr32 (0x67) prefix zero-extends the lower 32 bits address to
64 bits, change disassembler to zero-extend the lower 32 bits displacement
to 64 bits when there is no base nor index registers.
gas/
PR gas/26237
* testsuite/gas/i386/addr32.s: Add tests for 32-bit wrapped around
address.
* testsuite/gas/i386/x86-64-addr32.s: Likewise.
* testsuite/gas/i386/addr32.d: Updated.
* testsuite/gas/i386/x86-64-addr32-intel.d: Likewise.
* testsuite/gas/i386/x86-64-addr32.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-addr32-intel.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-addr32.d: Likewise.
opcodes/
PR gas/26237
* i386-dis.c (OP_E_memory): Without base nor index registers,
32-bit displacement to 64 bits.
%db<n> is an AT&T invention; the Intel documentation and MASM have only
ever specified DRn (in line with CRn and TRn). (In principle gas also
shouldn't accept the names in Intel mode, but at least for now I've kept
things as they are. Perhaps as a first step this should just be warned
about.)
The only valid (embedded or explicit) prefix being the data size one
(which is a fairly common pattern), avoid going through prefix_table[].
Instead extend the "required prefix" logic to also handle PREFIX_DATA
alone in a table entry, now used to identify this case. This requires
moving the (adjusted) ->prefix_requirement logic ahead of the printing
of stray prefixes, as the latter needs to observe the new setting of
PREFIX_DATA in used_prefixes.
Also add PREFIX_OPCODE on related entries when previously there was
mistakenly no decode step through prefix_table[].
The operands don't allow disambiguating the insn in 64-bit mode, and
hence suffixes need to be emitted not just in AT&T mode. Achieve this
by re-using %LQ while dropping PCMPESTR_Fixup().
MOVBE_Fixup() is entirely redundant with the S macro already used on the
mnemonics, leading to double suffixes in suffix-always mode. Drop the
function.
Just like other insns with GPR operands, CRC32 with only register
operands should not get a suffix added unless in suffix-always mode.
Do away with CRC32_Fixup() altogether, using other more generic logic
instead.
Unlike for non-zero values passed to USED_REX(), where rex_used gets
updated only when the respective bit was actually set in the encoding,
zero getting passed in is not further guarded, yet such a (potentially
"empty") REX prefix takes effect only when there are registers numbered
4 and up.
There's only a very limited set of modes that this function gets invoked
with - avoid it being more generic than it needs to be. This may, down
the road, allow actually doing away with the function altogether.
This eliminates a first improperly used "USED_REX (0)".
Various of the test expectations get adjusted later in this and a
subsequent series, so in order to avoid having to adjust more instances
than necessary fold respective test ILP32 expectations with their main
64-bit counterparts where they're identical anyway.
When encoding a 32-bit offset, there is no need to sign-extend it to 64
bits since only the lower 32 bits are used.
* config/tc-i386.c (offset_in_range): Remove 32-bit sign
extension.
git commit af2b318648 introduced a number of XPASSes. This removes
them. (It also introduces a FAIL on ft32-elf but the comment in the
.d file didn't adequately explain why the failure should be expected.)
* testsuite/gas/elf/dwarf2-7.d: Remove most xfails.
* testsuite/gas/elf/dwarf2-12.d: Likewise.
* testsuite/gas/elf/dwarf2-13.d: Likewise.
* testsuite/gas/elf/dwarf2-14.d: Likewise.
Extract extended states from operand types in instruction template. Set
xstate_zmm for master register move.
* config/tc-i386.c (_i386_insn): Remove has_regmmx, has_regxmm,
has_regymm, has_regzmm and has_regtmm. Add xstate.
(md_assemble): Set i.xstate from operand types in instruction
template.
(build_modrm_byte): Updated.
(output_insn): Check i.xstate.
* testsuite/gas/i386/i386.exp: Run property-6 and
x86-64-property-6.
* testsuite/gas/i386/property-6.d: New file.
* testsuite/gas/i386/property-6.s: Updated.
* testsuite/gas/i386/x86-64-property-6.d: Likewise.
Since VEX/EVEX vector instructions will always update the full YMM/ZMM
registers, set YMM/ZMM features for VEX/EVEX vector instructions.
* config/tc-i386.c (output_insn): Set YMM/ZMM features for
VEX/EVEX vector instructions.
* testsuite/gas/i386/property-4.d: New file.
* testsuite/gas/i386/property-4.s: Likewise.
* testsuite/gas/i386/property-5.d: Likewise.
* testsuite/gas/i386/property-5.s: Likewise.
* testsuite/gas/i386/x86-64-property-4.d: Likewise.
* testsuite/gas/i386/x86-64-property-5.d: Likewise.
Just like other VEX-encoded scalar insns do.
Besides a testcase for this behavior also introduce one to verify that
XOP scalar insns don't honor -mavxscalar=256, as they don't ignore
XOP.L.
Just like their AVX counterparts do for VEX.L.
At this occasion also make EVEX.W have the same effect as VEX.W on the
printing of VPINSR{B,W}'s operands, bringing them also in sync with
VPEXTR{B,W}.
There's only a single user, that that one can do fine with the
alternative, as the "Vex" aspect of the other operand kind is meaningful
only on 3-operand insns.
While doing this I noticed that I didn't need to do the same adjustment
in the EVEX tables, and voilà - there was a bug, which gets fixed at the
same time (see the testsuite changes).
We check register-only source operand to decide if two source operands of
VEX encoded instructions should be swapped. But source operands in AMX
instructions with two source operands swapped are all register-only
operand. Add SwapSources to indicate two source operands should be
swapped.
gas/
* config/tc-i386.c (build_modrm_byte): Check vexswapsources to
swap two source operands.
opcodes/
* i386-gen.c (opcode_modifiers): Add VexSwapSources.
* i386-opc.h (VexSwapSources): New.
(i386_opcode_modifier): Add vexswapsources.
* i386-opc.tbl: Add VexSwapSources to BMI2 and BMI instructions
with two source operands swapped.
* i386-tbl.h: Regenerated.
This patch fixes a segfault which occurs when the AArch64 backend parses
a symbol operand that begins with a register name and ends with a
unicode byte (byte value > 127).
For example, the following input causes the crash:
x0é: udf x0é
gas/ChangeLog:
2020-07-02 Alex Coplan <alex.coplan@arm.com>
* config/tc-aarch64.c (reg_name_p): Fix cast so that we don't
segfault on negative chars.
* testsuite/gas/aarch64/reglike-label-unicode-segv.d: New test.
* testsuite/gas/aarch64/reglike-label-unicode-segv.s: Input.
The xc16x md_apply_fix code is just so broken that in my opinion the
target should never have been accepted, and from a quick look at
commit logs for the target it appears that no one has ever contributed
fixes for anything. This target has just been a 14 year burden on
global binutils and cgen maintainers. That's not how free software is
supposed to work.
bfd/
* config.bfd: Obsolete xc16x.
gas/
* config/tc-xc16x.c (md_apply_fix): Add FIXME.
The unprivileged CSR should be controlled by other specific specs rather
than the privileged spec. For example, the debug CSR should be controlled
by the debug spec, and the float CSR should be controlled by the float
spec. User may use assembler options to choose what the debug and other
specs they want, or may encode the versions of specs into the architecture
string directly. Since we haven't decided which one is better, we set the
defined and aborted versions of unprivileged CSR to PRIV_SPEC_CLASS_NONE
in the include/opcode/riscv-opc.h, to tell assembler don't check priv spec
versions for them. However, these PRIV_SPEC_CLASS_NONE will be changed
to FLOAT_SPEC_CLASS_* and DEBUG_SPEC_CLASS_* in the future.
gas/
* config/tc-riscv.c (riscv_csr_class_check): Removed. Move the
checking into riscv_csr_address.
(riscv_csr_version_check): Likewise.
(riscv_csr_address): New function. Return the suitable CSR address
after checking the ISA dependency and versions. Issue warnings if
we find any conflict and -mcsr-check is set. CSR_CLASS_F and
CSR_CLASS_DEBUG are unprivileged CSR for now, so don't check the
priv spec versions for them.
(reg_csr_lookup_internal): Call riscv_csr_address to find the
suitable CSR address.
* testsuite/gas/riscv/priv-reg-fail-fext.d: Remove -mpriv-spec=1.11.
* testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-fext.l: We don't care the
priv spec warnings here. These warnings are added by accident.
Remove them and only focus on the ISA dependency warnings.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Updated since
dscratch0 and dscratch1 are regarded as the unprivileged CSR rather
than the privileged ones.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* testsuite/gas/riscv/priv-reg.s: Likewise. Add missing debug CSR.
* testsuite/gas/riscv/priv-reg-version-1p9.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p11.d: Likewise.
* testsuite/gas/riscv/csr-dw-regnums.d: Likewise.
* testsuite/gas/riscv/csr-dw-regnums.s: Likewise.
include/
* opcode/riscv-opc.h: Support the unprivileged CSR. The versions
of the unprivileged CSR should be PRIV_SPEC_CLASS_NONE for now.
* opcode/riscv.h (enum riscv_csr_class): Add CSR_CLASS_DEBUG.
opcodes/
* riscv-dis.c (print_insn_args, case 'E'): Updated. Let the
unprivileged CSR can also be initialized.
Finally; sorry for the delay. There were a few false starts, where I
misinterpreted the error-messages and the comment that Alan added:
it's not the fix size that's too large (and the frag too small), it's
stating the wrong size of what will be "fixed up" - that of the actual
target value, not the size of the field that needs to be adjusted.
Comments added for clarity.
Test-suite committed separately.
gas:
PR gas/25331
* config/tc-mmix.c (md_assemble) <fixup for
BFD_RELOC_MMIX_BASE_PLUS_OFFSET>: This fixup affects 1 byte, not 8.
Also, set its fx_no_overflow.
(md_convert_frag) <case ENCODE_RELAX (STATE_PUSHJSTUB, STATE_ZERO)>:
Similarly this fixup affects 4 bytes, not 8 and needs its
fx_no_overflow set.
* config/tc-mmix.h (TC_FX_SIZE_SLACK): Don't define.
To support Intel AMX instructions with 8-bit immediate opcode extension,
but without operands:
tilerelease, 0, 0x49, 0xc0, 1, CpuAMX_TILE|Cpu64, Vex|VexOpcode=1|No_bSuf|No_wSuf|No_lSuf|No_sSuf|No_qSuf|No_ldSuf|ImmExt, { 0 }
process ImmExt without operands.
* config/tc-i386.c (md_assemble): Process ImmExt without
operands.
Rename VecSIB to SIB to support Intel Advanced Matrix Extensions which
introduces instructions with a mandatory SIB byte which isn't a vector
SIB (VSIB).
gas/
* config/tc-i386.c (check_VecOperands): Replace vecsib with sib.
Replace VecSIB128, VecSIB256 and VecSIB512 with VECSIB128,
VECSIB256 and VECSIB512, respectively.
(build_modrm_byte): Replace vecsib with sib.
opcodes/
* i386-gen.c (opcode_modifiers): Replace VecSIB with SIB.
(VecSIB128): Renamed to ...
(VECSIB128): This.
(VecSIB256): Renamed to ...
(VECSIB256): This.
(VecSIB512): Renamed to ...
(VECSIB512): This.
(VecSIB): Renamed to ...
(SIB): This.
(i386_opcode_modifier): Replace vecsib with sib.
* i386-opc.tbl (VexSIB128): New.
(VecSIB256): Likewise.
(VecSIB512): Likewise.
Replace VecSIB=1, VecSIB=2 and VecSIB=3 with VexSIB128, VecSIB256
and VecSIB512, respectively.
Multiple -M options can be specified in any order. Therefore stright
assignment to fields affected needs to be avoided, such that earlier
options' effects won't be discarded. This was in particular a problem
for -Msuffix followed by certain of the other sub-options.
While updating documentation, take the liberty and also drop the
redundant mentioning of being able to comma-separate multiple options.
This patch adds GNU attribute support to m68k and utilises it to tag the
floating-point calling convention used (hard-float or soft-float). It enables
the linker to ensure linked objects use a consistent floating-point ABI and
allows tools like GDB to infer the ABI used from the ELF file. It is based on
similar work done for PowerPC.
bfd/
* elf32-m68k.c (m68k_elf_merge_obj_attributes): New function.
(elf32_m68k_merge_private_bfd_data): Merge GNU attributes.
binutils/
* readelf.c (display_m68k_gnu_attribute): New function.
(process_arch_specific): Call display_m68k_gnu_attribute for EM_68K.
gas/
* config/tc-m68k.c (m68k_elf_gnu_attribute): New function.
(md_pseudo_table): Handle "gnu_attribute".
* doc/as.texi: Document GNU attribute for M68K.
include/
* elf/m68k.h: Add enum for GNU object attribute with floating point
tag name and values.
ld/
* testsuite/ld-m68k/attr-gnu-4-0.s: New file.
* testsuite/ld-m68k/attr-gnu-4-1.s: Likewise.
* testsuite/ld-m68k/attr-gnu-4-2.s: Likewise.
* testsuite/ld-m68k/attr-gnu-4-00.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-01.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-02.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-10.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-11.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-12.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-20.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-21.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-22.d: Likewise.
* testsuite/ld-m68k/m68k.exp: Run the new tests.
With abuses of ImmExt gone, all templates using it have operands. Move
its main invocation into process_operands(), matching its secondary one
for the SSE2AVX case.
Use of an explicit data size or REX.W prefix is sufficient indication of
the intended operation when operand size can't be derived from suffix or
register operands. Avoid the ambiguity warning and make in particular
immediate handling (sizing) cope with explicitly specified prefixes.
Extending/reusing the noreg16 test made me notice a few cases of
unintentional 32-bit addressing, which gets corrected at the same time.
SYSRET can't use the same macro as IRET, since there's no 16-bit operand
size form of it. Re-use LQ for it instead.
Doing so made obvious that outside of 64-bit mode {,V}CVTSI2S{S,D} and
PTWRITE should have an 'l' suffix printed only in suffix-always mode.
Just like for the data size prefix (see commit 7a8655d2bb ["x86: don't
abort() upon DATA16 prefix on (E)VEX encoded insn"]), any form of REX
prefix is invalid with VEX/XOP/EVEX.
Legacy encoded insns do so, and their automatic conversion to AVX ones
ought to produce functionally identical code. Therefore explicit REX
prefixes cannot simply be ignored. This is in particular relevant
because at least PCMPESTR{I,M}'s 64-bit forms couldn't be expressed in
older gas by other than using a REX64 prefix.
The data size prefix alters the meaning of legacy encoded SIMD insns,
and hence shouldn't be accepted there. Use of it also leads to
inconsistencies in SSE2AVX mode. Don't match insns with data size prefix
against SSE2AVX templates.
