Consider the following scenario. We start gdb in TUI mode:
...
$ gdb -q -tui
...
and type ^R which gives us the reverse-isearch prompt in the cmd window:
...
(reverse-i-search)`':
...
and then type "foo", right-arrow-key, and ^C.
In TUI mode, gdb uses a custom rl_getc_function tui_getc.
When pressing the right-arrow-key, tui_getc:
- attempts to scroll the TUI src window, without any effect, and
- returns 0.
The intention of returning 0 is mentioned here in tui_dispatch_ctrl_char:
...
/* We intercepted the control character, so return 0 (which readline
will interpret as a no-op). */
return 0;
...
However, after this 0 is returned by the rl_read_key () call in
_rl_search_getchar, _rl_read_mbstring is called, which incorrectly interprets
0 as the first part of an utf-8 multibyte char, and tries to read the next
char.
In this state, the ^C takes effect and we run into a double free because
_rl_isearch_cleanup is called twice.
Both these issues need fixing independently, though after fixing the first we
no longer trigger the second.
The first issue is caused by the subtle difference between:
- a char array containing 0 chars, which is zero-terminated, and
- a char array containing 1 char, which is zero.
In mbrtowc terms, this is the difference between:
...
mbrtowc (&wc, "", 0, &ps);
...
which returns -2, and:
...
mbrtowc (&wc, "", 1, &ps);
...
which returns 0.
Note that _rl_read_mbstring calls _rl_get_char_len without passing it an
explicit length parameter, and consequently it cannot distinguish between the
two, and defaults to the "0 chars" choice.
Note that the same problem doesn't exist in _rl_read_mbchar.
Fix this by defaulting to the "1 char" choice in _rl_get_char_len:
...
- if (_rl_utf8locale && l > 0 && UTF8_SINGLEBYTE(*src))
+ if (_rl_utf8locale && l >= 0 && UTF8_SINGLEBYTE(*src))
...
The second problem happens when the call to _rl_search_getchar in
_rl_isearch_callback returns. At that point _rl_isearch_cleanup has already
been called from the signal handler, but we proceed regardless, using a cxt
pointer that has been freed.
Fix this by checking for "RL_ISSTATE (RL_STATE_ISEARCH)" after the call to
_rl_search_getchar:
...
c = _rl_search_getchar (cxt);
+ if (!RL_ISSTATE (RL_STATE_ISEARCH))
+ return 1;
...
Tested on x86_64-linux.
Approved-By: Chet Ramey <chet.ramey@case.edu>
PR tui/30056
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30056
After these two commits:
commit 4fb7bc4b14
Date: Mon Mar 7 13:49:21 2022 +0000
readline: back-port changes needed to properly detect EOF
commit 91395d97d9
Date: Tue Feb 15 17:28:03 2022 +0000
gdb: handle bracketed-paste-mode and EOF correctly
It was observed that, if a previous command is selected at the
readline prompt using the up arrow key, then when the command is
accepted (by pressing return) an unexpected 'quit' message will be
printed by GDB. Here's an example session:
(gdb) p 123
$1 = 123
(gdb) p 123
quit
$2 = 123
(gdb)
In this session the second 'p 123' was entered not by typing 'p 123',
but by pressing the up arrow key to select the previous command. It
is important that the up arrow key is used, typing Ctrl-p will not
trigger the bug.
The problem here appears to be readline's EOF detection when handling
multi-character input sequences. I have raised this issue on the
readline mailing list here:
https://lists.gnu.org/archive/html/bug-readline/2022-04/msg00012.html
a solution has been proposed here:
https://lists.gnu.org/archive/html/bug-readline/2022-04/msg00016.html
This patch includes a test for this issue as well as a back-port of
(the important bits of) readline commit:
commit 2ef9cec8c48ab1ae3a16b1874a49bd1f58eaaca1
Date: Wed May 4 11:18:04 2022 -0400
fix for setting RL_STATE_EOF in callback mode
That commit also includes some updates to the readline documentation
and tests that I have not included in this commit.
With this commit in place the unexpected 'quit' messages are resolved.
This commit is a partial back-port of this upstream readline commit:
commit 002d31aa5f5929eb32d0e0e2e8b8d35d99e59961
Author: Chet Ramey <chet.ramey@case.edu>
Date: Thu Mar 3 11:11:47 2022 -0500
add rl_eof_found to public API; fix pointer aliasing problems \
with history-search-backward; fix a display problem with \
runs of invisible characters at the end of a physical \
screen line
I have only pulled in the parts of this commit that relate to the new
rl_eof_found global, and the RL_STATE_EOF state flag. These changes
are needed in order to fix PR cli/28833, and are discussed in this
thread to the bug-readline mailing list:
https://lists.gnu.org/archive/html/bug-readline/2022-02/msg00021.html
The above commit is not yet in any official readline release, but my
hope is that now it has been merged into the readline tree it should
be safe enough to back port this fix to GDB's tree.
At some point in the future we will inevitably want to roll forward
the version of readline that we maintain in the binutils-gdb
repository. When that day comes the changes in this commit can be
replaced with the latest upstream readline code, as I have not changed
the meaning of this code at all from what is in upstream readline.
This commit alone does not fix the PR cli/28833 issue, for that see
the next commit, which changes GDB itself.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28833
Complement commit ae52f48306 ("Add MIPS r3 and r5 support.") and get
changes for config.sub to recognize MIPS CPU patterns for the R3 and R5
ISA levels, used by GAS to set defaults in gas/configure.ac. Oddly, R6
ISA support has been correctly added already.
/
* config.guess: Import from upstream.
* config.sub: Likewise.
readline/
* readline/support/config.guess: Import from upstream.
* readline/support/config.sub: Likewise.
The mingw build fails with Readline 8.1, because sigprocmask is called
unconditionally. This patch adds the missing check for
HAVE_POSIX_SIGNALS.
I reported this upstream here:
https://lists.gnu.org/archive/html/bug-readline/2021-01/msg00011.html
readline/ChangeLog
2021-03-02 Tom Tromey <tom@tromey.com>
* readline/signals.c (_rl_handle_signal): Add missing check for
HAVE_POSIX_SIGNALS.
This imports readline 8.1. I did this via various hackery in a
readline git repository to make a version of readline identical to
gdb's, then did a git merge.
readline/ChangeLog
2021-03-02 Tom Tromey <tom@tromey.com>
* Import readline 8.1.
A while back, Eli sent a patch to readline that was incorporated by
upstream readline in a slightly different form. To cut down on
divergences between GDB and upstream readline, I am checking in this
patch to use the readline code.
readline/readline/ChangeLog.gdb
2021-01-23 Tom Tromey <tom@tromey.com>
* input.c [_WIN32]: Use code from upstream readline.
This updates readline/README to mention the current patchlevel, and
the "git am" approach to importing new upstream patches.
readline/ChangeLog
2020-06-30 Tom Tromey <tom@tromey.com>
* README: Update instructions.
readline/ChangeLog
2019-12-23 Eli Zaretskii <eliz@gnu.org>
* posixstat.h (S_IRGRP, S_IWGRP, S_IXGRP, S_IROTH, S_IWOTH)
(S_IXOTH, S_IRWXG, S_IRWXO): Define if undefined, even if S_IRWXU
is defined, because non-Posix systems may defined only the user
bits.
Christian's recent patches to gnulib made me realize that readline
should be changed to use AC_CONFIG_MACRO_DIRS (ACLOCAL_AMFLAGS is
deprecated) and that it can put the automake options into
configure.ac. I also added no-define to the automake options. This
doesn't matter much (we don't generate a config.h here), but gnulib
does it, and it does make configure slightly smaller.
readline/ChangeLog
2019-11-15 Tom Tromey <tromey@adacore.com>
* configure, Makefile.in: Rebuild.
* configure.ac: Use AC_CONFIG_MACRO_DIRS. Pass options to
AM_INIT_AUTOMAKE.
* Makefile.am (AUTOMAKE_OPTIONS, ACLOCAL_AMFLAGS): Remove.
Change-Id: If421599cc9dd9c4c3c37b9b439ab2c22c01742ed
readline turns out to be a bit of a stumbling block for the project to
move gdbsupport (and then gdbserver) to the top-level.
The issue is that readline headers are intended to be included with
names like "readline/readline.h". To support this, gdb effectively
adds a -I option pointing to the top-level source directory -- but,
importantly, this option is not used when the system readline is used.
For gdbsupport, a -I option like this would always be needed, but that
in turn would break the system readline case. This was PR build/17077,
fixed in commit a8a5dbcab8.
Previously, we had discussed this on the gdb-patches list in terms of
removing readline from the tree
https://sourceware.org/ml/gdb-patches/2019-09/msg00317.html
However, Eli expressed some concerns, and Joel did as well (off-list).
Given those concerns, and the fact that a patch-free local readline is
relatively new in gdb (it was locally patched for years), I changed my
mind and decided to handle this situation by moving the readline
sources down a level.
That is, upstream readline is now in readline/readline, and the
top-level readline directory just contains the minimal configury
needed to build that.
This fixes the problem because, when gdb unconditionally adds a
-I$(top_srcdir), this will not find readline headers. A separate -I
will be needed instead, which is exactly what's needed for
--with-system-readline.
gdb/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
* Makefile.in (READLINE_DIR): Update.
gdb/doc/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
* Makefile.in (READLINE_DIR): Update.
readline/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
Move old contents to readline/ subdirectory.
* aclocal.m4, configure, configure.ac, .gitignore, Makefile.am,
Makefile.in, README: New files.
Change-Id: Ice156a2ee09ea68722b48f64d97146d7428ea9e4
This commit in binutils-gdb:
commit 830b67068c
Date: Fri Jul 12 09:53:02 2019 +0200
[readline] Fix heap-buffer-overflow in update_line
Which corresponds to this commit in upstream readline:
commit 31547b4ea4a1a904e1b08e2bc4b4ebd5042aedaa
Date: Mon Aug 5 10:24:27 2019 -0400
commit readline-20190805 snapshot
Introduced a use of an undefined variable, which can be seen using
valgrind:
$ valgrind --tool=memcheck gdb
GNU gdb (GDB) 8.3.50.20190918-git
Copyright (C) 2019 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-pc-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word".
==24924== Conditional jump or move depends on uninitialised value(s)
==24924== at 0x9986C3: rl_redisplay (display.c:710)
==24924== by 0x9839CE: readline_internal_setup (readline.c:447)
==24924== by 0x9A1C2B: _rl_callback_newline (callback.c:100)
==24924== by 0x9A1C85: rl_callback_handler_install (callback.c:111)
==24924== by 0x6195EB: gdb_rl_callback_handler_install(char const*) (event-top.c:319)
==24924== by 0x61975E: display_gdb_prompt(char const*) (event-top.c:409)
==24924== by 0x4FBFE3: cli_interp_base::pre_command_loop() (cli-interp.c:286)
==24924== by 0x6E53DA: interp_pre_command_loop(interp*) (interps.c:321)
==24924== by 0x731F30: captured_command_loop() (main.c:334)
==24924== by 0x733568: captured_main(void*) (main.c:1182)
==24924== by 0x7335CE: gdb_main(captured_main_args*) (main.c:1197)
==24924== by 0x41325D: main (gdb.c:32)
==24924==
(gdb)
The problem can be traced back to init_line_structures. The very
first time this function is ever called its MINSIZE parameter is
always 0 and the global LINE_SIZE is 1024. Prior to the above
mentioned commits we spot that the line_state variables have not yet
been initialised, and allocate them some new buffer, then we enter
this loop:
for (n = minsize; n < line_size; n++)
{
visible_line[n] = 0;
invisible_line[n] = 1;
}
which would initialise everything from the incoming minimum up to the
potentially extended upper line size.
The problem is that the above patches added a new condition that would
bump up the minsize like this:
if (minsize <= _rl_screenwidth) /* XXX - for gdb */
minsize = _rl_screenwidth + 1;
So, the first time this function is called the incoming MINSIZE is 0,
the LINE_SIZE global is 1024, and if the _rl_screenwidth is 80, we see
that MINSIZE will be pushed up to 80. We still notice that the line
state is uninitialised and allocate some buffers, then we enter the
initialisation loop:
for (n = minsize; n < line_size; n++)
{
visible_line[n] = 0;
invisible_line[n] = 1;
}
And initialise from 80 to 1023 i the newly allocated buffers, leaving
0 to 79 uninitialised.
To confirm this is an issue, if we then look at rl_redisplay we see
that a call to init_line_structures is followed first by a call to
rl_on_new_line, which does initialise visible_line[0], but not
invisible_line[0]. Later in rl_redisplay we have this logic:
if (visible_line[0] != invisible_line[0])
rl_display_fixed = 0;
The use of invisible_line[0] here will be undefined.
Considering how this variable was originally initialised before the
above patches, this patch modifies the initialisation loop in
init_line_structures, to use the original value of MINSIZE. With this
change the valgrind warning goes away.
readline/ChangeLog:
PR cli/24980
* display.c (init_line_structures): Initialise line_state using
original minsize value.
S_ISLNK should not be called outside of an #ifdef.
However, this specific call is actually unnecessary, because
linkok can only be 0 if S_ISLNK is true, per the code above.
I have sent a bug report to bug-readline, though it does not show
up in the online archive yet.
2019-08-13 Christian Biesinger <cbiesinger@google.com>
* colors.c (_rl_print_color_indicator): Remove unnecessary
S_ISLNK check to fix compilation on MinGW.
There is a gdb-local patch to deal with interrupts during completion.
The original thread adding this patch is here:
https://sourceware.org/ml/gdb-patches/2011-06/msg00147.html
I believe readline now implements the approach suggested by
Chet Ramey:
https://sourceware.org/ml/gdb-patches/2011-06/msg00493.html
So, I believe this patch can be removed.
readline/ChangeLog.gdb
2018-10-07 Tom Tromey <tom@tromey.com>
* Makefile.in (xfree.o): Don't depend on readline.h.
* xfree.c (xfree): Remove gdb workaround.
* xmalloc.h (xfree): Remove #define.
There is a gdb-local patch in readline/emacs_keymap.c that says:
/* Temporary - this is a bug in readline 5.1 that should be fixed in
readline 5.2. */
So, I think this can be removed now. I have no way to test this, as
the patch was specific to mingw.
readline/ChangeLog.gdb
2018-10-07 Tom Tromey <tom@tromey.com>
* emacs_keymap.c: Remove gdb workaround.
This removes a gdb-local patch from readline's get_y_or_n. The code
references a gdb test that continues to work when I remove this patch.
So, I think it is not needed any more.
readline/ChangeLog.gdb
2018-10-07 Tom Tromey <tom@tromey.com>
* complete.c (get_y_or_n): Remove gdb workaround.
This imports readline 7.0 (up to patch 5) while preserving all
gdb-local changes.
This was done by checking out the readline git repository, making a
branch based on the gdb baseline revision, applying the gdb changes to
that branch, and then merging from readline 7.
readline/ChangeLog.gdb
2019-08-12 Tom Tromey <tom@tromey.com>
* Imported readline 7.0 patch 5.
When:
- building trunk gdb with '-fsanitize=address -lasan',
- running gdb tests with "export ASAN_OPTIONS=detect_leaks=0",
I run into a heap-buffer-overflow failure for
gdb.base/utf8-identifiers.exp.
In more detail, the libasan error report looks like this:
...
=================================================================
==22340==ERROR: AddressSanitizer: heap-buffer-overflow on address
0x619000054a80 at pc 0x7fcd0306b4c9 bp 0x7fffb1a8d880 sp 0x7fffb1a8d030
READ of size 32766 at 0x619000054a80 thread T0
#0 0x7fcd0306b4c8 (/usr/lib64/libasan.so.4+0xae4c8)
#1 0x15f12a1 in update_line
/data/gdb_versions/devel/src/readline/display.c:1377
#2 0x15f03cb in rl_redisplay
/data/gdb_versions/devel/src/readline/display.c:1204
#3 0x15bf932 in readline_internal_setup
/data/gdb_versions/devel/src/readline/readline.c:394
#4 0x15fe723 in _rl_callback_newline
/data/gdb_versions/devel/src/readline/callback.c:89
#5 0x15fe7ef in rl_callback_handler_install
/data/gdb_versions/devel/src/readline/callback.c:102
#6 0xd7bce6 in gdb_rl_callback_handler_install(char const*)
/data/gdb_versions/devel/src/gdb/event-top.c:319
#7 0xd7c0c6 in display_gdb_prompt(char const*)
/data/gdb_versions/devel/src/gdb/event-top.c:409
#8 0xd7d6c1 in command_line_handler(std::unique_ptr<char,
gdb::xfree_deleter<char> >&&)
/data/gdb_versions/devel/src/gdb/event-top.c:776
#9 0xd7b92a in gdb_rl_callback_handler
/data/gdb_versions/devel/src/gdb/event-top.c:217
#10 0x15ff479 in rl_callback_read_char
/data/gdb_versions/devel/src/readline/callback.c:220
#11 0xd7b4d5 in gdb_rl_callback_read_char_wrapper_noexcept
/data/gdb_versions/devel/src/gdb/event-top.c:175
#12 0xd7b6b5 in gdb_rl_callback_read_char_wrapper
/data/gdb_versions/devel/src/gdb/event-top.c:192
#13 0xd7c8aa in stdin_event_handler(int, void*)
/data/gdb_versions/devel/src/gdb/event-top.c:514
#14 0xd76ca7 in handle_file_event
/data/gdb_versions/devel/src/gdb/event-loop.c:731
#15 0xd7751f in gdb_wait_for_event
/data/gdb_versions/devel/src/gdb/event-loop.c:857
#16 0xd7547e in gdb_do_one_event()
/data/gdb_versions/devel/src/gdb/event-loop.c:321
#17 0xd75526 in start_event_loop()
/data/gdb_versions/devel/src/gdb/event-loop.c:370
#18 0x101b04c in captured_command_loop
/data/gdb_versions/devel/src/gdb/main.c:331
#19 0x101de73 in captured_main
/data/gdb_versions/devel/src/gdb/main.c:1173
#20 0x101df03 in gdb_main(captured_main_args*)
/data/gdb_versions/devel/src/gdb/main.c:1188
#21 0x872dba in main /data/gdb_versions/devel/src/gdb/gdb.c:32
#22 0x7fcd00f2ff49 in __libc_start_main (/lib64/libc.so.6+0x20f49)
#23 0x872bc9 in _start (/data/gdb_versions/devel/build/gdb/gdb+0x872bc9)
0x619000054a80 is located 0 bytes to the right of 1024-byte region
[0x619000054680,0x619000054a80)
allocated by thread T0 here:
#0 0x7fcd03099510 in malloc (/usr/lib64/libasan.so.4+0xdc510)
#1 0xae0078 in xmalloc
/data/gdb_versions/devel/src/gdb/common/common-utils.c:44
#2 0x15eaccb in init_line_structures
/data/gdb_versions/devel/src/readline/display.c:458
#3 0x15eb4d8 in rl_redisplay
/data/gdb_versions/devel/src/readline/display.c:526
#4 0x15bf932 in readline_internal_setup
/data/gdb_versions/devel/src/readline/readline.c:394
#5 0x15fe723 in _rl_callback_newline
/data/gdb_versions/devel/src/readline/callback.c:89
#6 0x15fe7ef in rl_callback_handler_install
/data/gdb_versions/devel/src/readline/callback.c:102
#7 0xd7bce6 in gdb_rl_callback_handler_install(char const*)
/data/gdb_versions/devel/src/gdb/event-top.c:319
#8 0xd7c0c6 in display_gdb_prompt(char const*)
/data/gdb_versions/devel/src/gdb/event-top.c:409
#9 0xaa041b in cli_interp_base::pre_command_loop()
/data/gdb_versions/devel/src/gdb/cli/cli-interp.c:286
#10 0xf5342a in interp_pre_command_loop(interp*)
/data/gdb_versions/devel/src/gdb/interps.c:320
#11 0x101b047 in captured_command_loop
/data/gdb_versions/devel/src/gdb/main.c:328
#12 0x101de73 in captured_main
/data/gdb_versions/devel/src/gdb/main.c:1173
#13 0x101df03 in gdb_main(captured_main_args*)
/data/gdb_versions/devel/src/gdb/main.c:1188
#14 0x872dba in main /data/gdb_versions/devel/src/gdb/gdb.c:32
#15 0x7fcd00f2ff49 in __libc_start_main (/lib64/libc.so.6+0x20f49)
SUMMARY: AddressSanitizer: heap-buffer-overflow
(/usr/lib64/libasan.so.4+0xae4c8)
Shadow bytes around the buggy address:
0x0c3280002900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3280002910: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3280002920: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3280002930: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3280002940: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>0x0c3280002950:[fa]fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3280002960: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3280002970: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3280002980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3280002990: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c32800029a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
==22340==ABORTING
...
I've written an assert in rl_redisplay that formulates the error condition:
...
@@ -1387,6 +1389,10 @@ rl_redisplay (void)
cpos_adjusted = 0;
+ assert (last_lmargin + (_rl_screenwidth + visible_wrap_offset)
+ <= line_size);
+ assert (lmargin + (_rl_screenwidth + (lmargin ? 0 : wrap_offset))
+ <= line_size);
update_line (&visible_line[last_lmargin],
&invisible_line[lmargin],
0,
_rl_screenwidth + visible_wrap_offset,
_rl_screenwidth + (lmargin ? 0 : wrap_offset),
0);
...
which triggers without needing the address sanitizer (or even an executable),
like this:
...
$ TERM=dumb gdb -q -ex "set width 0"
gdb: src/display.c:1393: rl_redisplay: Assertion
`last_lmargin + (_rl_screenwidth + visible_wrap_offset) <= line_size'
failed.
Aborted (core dumped)
...
The basic problem is this: visible_line and invisible_line have length
line_size, but the update_line call assumes that line_size is at least
_rl_screenwidth + 1. Executing "set width 0" sets _rl_screenwidth to 32766 but
doesn't affect line_size, which is initialized to 1024.
Fix this by ensuring in init_line_structures and rl_redisplay that line_size
is at least _rl_screenwidth + 1.
Tested on x86_64-linux.
Reviewed by readline maintainer (
https://sourceware.org/ml/gdb-patches/2019-05/msg00566.html ).
readline/ChangeLog.gdb:
2019-07-12 Tom de Vries <tdevries@suse.de>
Chet Ramey <chet.ramey@case.edu>
PR cli/24514
* readline/display.c (init_line_structures, rl_redisplay): Ensure
line_size is at least _rl_screenwidth + 1.
This is to bring in the newly introduced support for bpf-*-* targets.
ChangeLog:
2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
* config.guess: Synchronize with config project master sources.
* config.sub: Likewise.
* readline/support/config.guess: Likewise.
* readline/support/config.sub: Likewise.
Cleanup the readline warnings that gdb buildbot complains about.
To prevent wcwidth missing declaration warnings, add the SOURCE /
EXTENSION macros to config.in that have already checked for in
configure.
Ensure pid is a long before printing as one. Also fix GNU style.
Check the return value of write the same way as history_do_write ().
These changes are consistent with upstream readline.
readline/ChangeLog.gdb:
* config.h.in: Add SOURCE/EXTENSION macros.
* histfile.c (history_truncate_file): Check return of write.
* util.c (_rl_tropen): Ensure pid is long.
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
This change was already accepted upstream in Readline.
readline/ChangeLog.gdb:
2017-05-19 Eli Zaretskii <eliz@gnu.org>
* input.c [_WIN32]: Include <conio.h> to avoid compiler warning on
MinGW.
These changes were already accepted upstream in Readline,
but GDB did not yet import a newer Readline version.
readline/Changelog.gdb:
* util.c: Include rlshell.h.
(_rl_tropen) [_WIN32 && !__CYGWIN__]: Open the trace file in the
user's temporary directory.
* tcap.h [HAVE_NCURSES_TERMCAP_H]: Include ncurses/termcap.h.
* input.c (w32_isatty) [_WIN32 && !__CYGWIN__]: New function, to
replace isatty that is not reliable enough on MS-Windows.
(isatty) [_WIN32 && !__CYGWIN__]: Redirect to w32_isatty.
(rl_getc): Call _getch, not getch, which could be an ncurses
function when linked with ncurses, in which case getch will return
EOF for any keystroke, because there's no curses window.
* tilde.c (tilde_expand_word) [_WIN32]:
* histfile.c (history_filename) [_WIN32]: Windows-specific
environment variable to replace HOME if that is undefined.
* funmap.c (default_funmap): Compile rl_paste_from_clipboard on
all Windows platforms, not just Cygwin.
* readline.h (rl_paste_from_clipboard): Include declaration for
all Windows platforms.
* display.c (insert_some_chars, delete_chars): Don't use the
MinGW-specific code if linked with ncurses.
* configure.in:
* config.h.in: Support ncurses/termcap.h. The configure script
was updated accordingly.
* complete.c [_WIN32 && !__CYGWIN__]: Initialize
_rl_completion_case_fold to 1.
(printable_part, rl_filename_completion_function)
[_WIN32 && !__CYGWIN__]: Handle the drive letter.
This reverts commit b558ff043d.
This reverts commit 4a11f20659.
The initial import commit failed to retain local changes made to
readline's configure.in (and the commit message erroneously stated that
there were no local changes that needed to be reapplied). Also the
import caused a couple of build errors and a scattering of testsuite
regressions throughout many arches. It's probably better to start over
with this import, hopefully more carefully next time.
Since the sync to version 7.0-alpho, readline now by default builds
(unused) shared libraries alongside static libraries, whereas before it
only built static libraries. A couple of GDB buildbots were not happy
with this change:
http://gdb-build.sergiodj.net/builders/AIX-POWER7-plain/builds/240http://gdb-build.sergiodj.net/builders/Fedora-i686/builds/1518
To get these buildbots building again, this patch alters readline's
configure.ac file to not build shared libraries by default, as was the
case with readline 6.2. A more permanent fix may be to alter the
top-level Makefile.def to pass --disable-shared to readline, or to
investigate why these building these shared libraries are giving the
buildbots trouble. (I think the proximate reason why the i686 buildbot
fails is because it passes CFLAGS=-m32 instead of CC="gcc -m32" to the
top-level configure script, and readline's linker commands don't inherit
CFLAGS. Not sure about the AIX failure.)
readline/ChangeLog.gdb:
* configure.ac: Default opt_shared_libs to no.
* configure: Regenerate.
This patch syncs our upstream copy of readline from version 6.2 to the
latest version, 7.0 alpha (released July 10 2015).
I essentially copied what was done the last time readline was synced,
when Jan updated to readline 6.2 in 2011:
http://sourceware.org/ml/gdb-patches/2011-05/msg00003.html
Procedure:
1. I extracted the readline-7.0-alpha tarball on top of readline/.
2. I deleted all the new files under doc/ that were deliberately omitted
before.
3. I regenerated readline/configure and readline/examples/rlfe/configure
using autoconf 2.64. No other configure files need regenerating.
4. I updated the function gdb_printable_part in completer.c with a
trivial change made to the readline function it is based off of,
printable_part in readline/complete.c. There is more work to be done in
completer.c to sync it with readline/complete.c, but it is non-trivial
and should probably be done separately anyway.
Local patches that had to be reapplied:
None. readline 7.0 alpha contains all of our local readline
patches.
New files in readline/:
colors.{c,h}
examples/{hist_erasedups,hist_purgecmd,rl-callbacktest,rlbasic}.c
parse-colors.{c,h}
readline.pc.in
configure.ac
Deleted files in readline/:
configure.in
Regressions:
After the sync there is one testsuite regression, the test
"signal SIGINT" in gdb.gdb/selftest.exp which now FAILs. Previously,
the readline 6.2 SIGINT handler would temporarily reinstall the
underlying application's SIGINT handler and immediately re-raise SIGINT
so that the orginal handler gets invoked. But now (since readline 6.3)
its SIGINT handler does not re-raise SIGINT or directly invoke the
original handler; it now sets a flag marking that SIGINT was raised, and
waits until readline explicitly has control to call the application's
SIGINT handler. Anyway, because SIGINT is no longer re-raised from
within readline's SIGINT handler, doing "signal SIGINT" with a stopped
inferior gdb process will no longer resume and then immediately stop the
process (since there is no 2nd SIGINT to immediately catch). Instead,
the inferior gdb process will now just print "Quit" and continue to run.
So with this commit, this particular test case is adjusted to reflect
this change in behavior (we now have to send a 2nd SIGINT manually to
stop it).
Aside from this one testsuite regression, I personally noticed no
regression in user-visible behavior. Though I only tested on x86_64
and on i686 Debian Stretch.
Getting this kind of change in at the start of the GDB 7.11 development
cycle will allow us to get a lot of passive testing from developers and
from bleeding-edge users.
readline/ChangeLog.gdb:
Import readline 7.0 alpha
* configure: Regenerate.
* examples/rlfe/configure: Regenerate.
gdb/ChangeLog:
* completer.c (gdb_printable_part): Sync with readline function
it is based off of.
gdb/testsuite/ChangeLog:
* gdb.gdb/selftest.exp (test_with_self): Update test to now
expect the GDB inferior to no longer immediately stop after
being resumed with "signal SIGINT".
* complete.c (stat_char) [_WIN32]: Don't use 'access' and X_OK on
Windows, they don't work. Instead, look at the file-name
extension to determine whether the file is executable.
The related warning under Darwin x86_64:
gcc -c -DHAVE_CONFIG_H -I. -I../../binutils-gdb/readline -DRL_LIBRARY_VERSION='"6.2"' -g -O2 ../../binutils-gdb/readline/search.c
../../binutils-gdb/readline/search.c:213:24: warning: data argument not used by format string [-Wformat-extra-args]
rl_message ("%s", p, 0);
~~~~ ^
1 warning generated.
readline/ChangeLog.gdb:
* search.c (_rl_nsearch_init): Remove useless parameter '0' for
rl_message().
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
This patch removes some unnecessary differences between the official
version of readline, and GDB's copy of it.
readline/ChangeLog.gdb:
* terminal.c: Remove duplicate includes of windows.h and
wincon.h.
(_rl_get_screen_size): Remove redundant code for MinGW getting
the console size from the Windows API.
Avoid free from a signal handler.
* Makefile.in (xfree.o): Add readline.h.
* xfree.c: Include stdio.h and readline.h.
(xfree): Return on RL_STATE_SIGHANDLER.
* xmalloc.h (xfree): New definition.
