This patch fixes this on x86 Linux:
(gdb) watch *buf@2
Hardware watchpoint 8: *buf@2
(gdb) si
0x00000000004005a7 34 for (i = 0; i < 100000; i++); /* stepi line */
(gdb) del
Delete all breakpoints? (y or n) y
(gdb) watch *(buf+1)@1
Hardware watchpoint 9: *(buf+1)@1
(gdb) si
0x00000000004005a7 in main () at ../../../src/gdb/testsuite/gdb.base/watchpoint-reuse-slot.c:34
34 for (i = 0; i < 100000; i++); /* stepi line */
Couldn't write debug register: Invalid argument.
(gdb)
In the example above the debug registers are being switched from this
state:
CONTROL (DR7): 0000000000050101 STATUS (DR6): 0000000000000000
DR0: addr=0x0000000000601040, ref.count=1 DR1: addr=0x0000000000000000, ref.count=0
DR2: addr=0x0000000000000000, ref.count=0 DR3: addr=0x0000000000000000, ref.count=0
to this:
CONTROL (DR7): 0000000000010101 STATUS (DR6): 0000000000000000
DR0: addr=0x0000000000601041, ref.count=1 DR1: addr=0x0000000000000000, ref.count=0
DR2: addr=0x0000000000000000, ref.count=0 DR3: addr=0x0000000000000000, ref.count=0
That is, before, DR7 was setup for watching a 2 byte region starting
at what's in DR0 (0x601040).
And after, DR7 is setup for watching a 1 byte region starting at
what's in DR0 (0x601041).
We always write DR0..DR3 before DR7, because if we enable a slot's
bits in DR7, you need to have already written the corresponding
DR0..DR3 registers -- the kernel rejects the DR7 write with EINVAL
otherwise.
The error shown above is the opposite scenario. When we try to write
0x601041 to DR0, DR7's bits still indicate intent of watching a 2-byte
region. That DR0/DR7 combination is invalid, because 0x601041 is
unaligned. To watch two bytes, we'd have to use two slots. So the
kernel errors out with EINVAL.
Fix this by always first clearing DR7, then writing DR0..DR3, and then
setting DR7's bits.
A little optimization -- if we're disabling the last watchpoint, then
we can clear DR7 just once. The changes to nat/i386-dregs.c make that
easier to detect, and as bonus, they make it a little easier to make
sense of DR7 in the debug logs, as we no longer need to remember we're
seeing stale bits.
Tested on x86_64 Fedora 20, native and GDBserver.
This adds an exhaustive test that switches between many different
combinations of watchpoint types and addresses and widths.
gdb/
2014-06-23 Pedro Alves <palves@redhat.com>
* amd64-linux-nat.c (amd64_linux_prepare_to_resume): Clear
DR_CONTROL before setting DR0..DR3.
* i386-linux-nat.c (i386_linux_prepare_to_resume): Likewise.
* nat/i386-dregs.c (i386_remove_aligned_watchpoint): Clear all
bits of DR_CONTROL related to the debug register slot being
disabled. If all slots are vacant, clear local slowdown as well,
and assert DR_CONTROL is 0.
gdb/gdbserver/
2014-06-23 Pedro Alves <palves@redhat.com>
* linux-x86-low.c (x86_linux_prepare_to_resume): Clear DR_CONTROL
before setting DR0..DR3.
gdb/testsuite/
2014-06-23 Pedro Alves <palves@redhat.com>
* gdb.base/watchpoint-reuse-slot.c: New file.
* gdb.base/watchpoint-reuse-slot.exp: New file.
Currently, the xmethod commands lookup xmethod matchers in the current
progspace even if the locus regular expression matches the progspace's
filename. Pretty printer commands do not match the current progspace's
filename.
gdb/
* python/lib/gdb/command/xmethods.py
(get_method_matchers_in_loci): Lookup xmethod matchers in the
current progspace only if the string "progspace" matches LOCUS_RE.
gdb/testsuite
* gdb.python/py-xmethods.exp: Use "progspace" instead of the
progspace's filename in 'info', 'enable' and 'disable' command
tests.
On x86_64 with -m32 or on i686 it will:
Running ./gdb.arch/amd64-stap-special-operands.exp ...
gdb compile failed, amd64-stap-triplet.c: Assembler messages:
amd64-stap-triplet.c:35: Error: bad register name `%rbp'
amd64-stap-triplet.c:38: Error: bad register name `%rsp'
amd64-stap-triplet.c:40: Error: bad register name `%rbp)'
amd64-stap-triplet.c:41: Error: bad register name `%rsi'
amd64-stap-triplet.c:42: Error: bad register name `%rbp)'
/tmp/ccjOdmpl.s:63: Error: bad register name `%rbp'
2014-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/amd64-stap-special-operands.exp: Use is_lp64_target.
* gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
* gdb.dwarf2/dw2-error.exp: Use istarget and is_lp64_target.
Message-ID: <20140622211401.GA3716@host2.jankratochvil.net>
I have filed now:
--with-system-readline uses bundled readline include files
https://sourceware.org/bugzilla/show_bug.cgi?id=17077
To see any effect of the patch below you have to do:
rm -rf readline
Otherwise readline include files get used the bundled ones from GDB which are
currently 6.2 while system readline may be 6.3 already.
You also have to use system readline-6.3 including its upstream patch:
[Bug-readline] Readline-6.3 Official Patch 5
http://lists.gnu.org/archive/html/bug-readline/2014-04/msg00018.html
Message-ID: <140415125618.AA57598.SM@caleb.ins.cwru.edu>
In short it happens on Fedora Rawhide since:
readline-6.3-1.fc21
https://koji.fedoraproject.org/koji/buildinfo?buildID=538941
The error is:
../../gdb/tui/tui-io.c:132:1: error: 'Function' is deprecated [-Werror=deprecated-declarations]
static Function *tui_old_rl_getc_function;
^
../../gdb/tui/tui-io.c:133:1: error: 'VFunction' is deprecated [-Werror=deprecated-declarations]
static VFunction *tui_old_rl_redisplay_function;
^
../../gdb/tui/tui-io.c:134:1: error: 'VFunction' is deprecated [-Werror=deprecated-declarations]
static VFunction *tui_old_rl_prep_terminal;
^
../../gdb/tui/tui-io.c:135:1: error: 'VFunction' is deprecated [-Werror=deprecated-declarations]
static VFunction *tui_old_rl_deprep_terminal;
^
It is since bash change:
lib/readline/rltypedefs.h
- remove old Function/VFunction/CPFunction/CPPFunction typedefs as
suggested by Tom Tromey <tromey@redhat.com>
The new typedefs used below are present in readline/rltypedefs.h since:
git://git.savannah.gnu.org/bash.git
commit 28ef6c316f1aff914bb95ac09787a3c83c1815fd
Date: Fri Apr 6 19:14:31 2001 +0000
gdb/
2014-06-20 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix --with-system-readline with readline-6.3 patch 5.
* tui/tui-io.c (tui_old_rl_getc_function, tui_old_rl_redisplay_function)
(tui_old_rl_prep_terminal, tui_old_rl_deprep_terminal): Use rl_*_t
types.
Message-ID: <20140620105004.GA22236@host2.jankratochvil.net>
This changes OBSTACK_ZALLOC and OBSTACK_CALLOC to cast their value to
the correct type. This is more type-safe and also is more in line
with the other object-allocation macros in libiberty.h.
Making this change revealed one trivial error in dwarf2read.c.
On the whole that seems pretty good to me.
Tested by rebuilding.
2014-06-20 Tom Tromey <tromey@redhat.com>
* dwarf2read.c (dw2_get_real_path): Use correct type in
OBSTACK_CALLOC.
* gdb_obstack.h (OBSTACK_ZALLOC, OBSTACK_CALLOC): Cast result.
This commit makes gdbserver access the x86 debug register accessor
functions via the same function vector as GDB proper. This removes
a chunk of conditional code that was previously in i386-{nat,low}.h
and leaves a single macro as the only GDB/gdbserver difference in
nat/i386-dregs.c.
gdb/
2014-06-20 Gary Benson <gbenson@redhat.com>
* i386-nat.h (debug_hw_points): Moved to nat/i386-dregs.c.
(i386_dr_low_type): Moved to nat/i386-dregs.h.
(i386_dr_low): Likewise.
(i386_dr_low_can_set_addr): Moved to nat/i386-dregs.c.
(i386_dr_low_set_addr): Likewise.
(i386_dr_low_get_addr): Likewise.
(i386_dr_low_can_set_control): Likewise.
(i386_dr_low_set_control): Likewise.
(i386_dr_low_get_control): Likewise.
(i386_dr_low_get_status): Likewise.
(i386_get_debug_register_length): Likewise.
* nat/i386-dregs.h (i386_dr_low_type): Moved from i386-nat.h.
(i386_dr_low): Likewise.
* nat/i386-dregs.c (i386-low.h): Remove include.
(i386-nat.h): Likewise.
(nat/i386-dregs.h): New include.
(i386_dr_low_can_set_addr): Moved from i386-nat.h.
(i386_dr_low_set_addr): Likewise.
(i386_dr_low_get_addr): Likewise.
(i386_dr_low_can_set_control): Likewise.
(i386_dr_low_set_control): Likewise.
(i386_dr_low_get_control): Likewise.
(i386_dr_low_get_status): Likewise.
(i386_get_debug_register_length): Likewise.
(debug_hw_points): Likewise.
gdb/gdbserver/
2014-06-20 Gary Benson <gbenson@redhat.com>
* i386-low.h (i386_dr_low_can_set_addr): Removed.
(i386_dr_low_set_addr): Likewise.
(i386_dr_low_get_addr): Likewise.
(i386_dr_low_can_set_control): Likewise.
(i386_dr_low_set_control): Likewise.
(i386_dr_low_get_control): Likewise.
(i386_dr_low_get_status): Likewise.
(i386_get_debug_register_length): Likewise.
* linux-x86-low.c (i386_dr_low_set_addr):
Changed signature. Made static.
(i386_dr_low_get_addr): Likewise.
(i386_dr_low_set_control): Likewise.
(i386_dr_low_get_control): Likewise.
(i386_dr_low_get_status): Likewise.
(i386_dr_low): New global variable.
* win32-i386-low.c (i386_dr_low_set_addr):
Changed signature. Made static.
(i386_dr_low_get_addr): Likewise.
(i386_dr_low_set_control): Likewise.
(i386_dr_low_get_control): Likewise.
(i386_dr_low_get_status): Likewise.
(i386_dr_low): New global variable.
The recent libiberty patch caused issues when cross building
gdbserver. The Makefile ends invoking the build machine's "ar"
instead of the --host version:
ar ./libiberty.a \
./regex.o (...)
ar: illegal option -- .
Usage: ar [emulation options] [-]{dmpqrstx}[abcfilNoPsSuvV] [member-name] [count] archive-file file...
ar -M [<mri-script]
The libiberty configure script does probe for and finds an appropriate
AR. However, gdbserver's configure does not probe for AR and
overrides the AR used in the libiberty build by explicitly passing AR
to the sub-builds.
gdb/gdbserver/
2014-06-20 Marcus Shawcroft <marcus.shawcroft@arm.com>
* configure.ac: Invoke. AC_CHECK_TOOL(AR, ar).
* Makefile.in (AR, AR_FLAGS): Define.
* configure: Regenerate.
other architectures when we emit IE relocs in a shared library.
* elf32-arm.c (elf32_arm_check_relocs): Set DF_STATIC_TLS when
emitting initial-exec relocs when not linking an executable.
gdb/
2014-06-05 Iain Buclaw <ibuclaw@gdcproject.org>
* Makefile.in (SFILES): Add d-exp.y.
(YYFILES): Add d-exp.c.
(YYOBJ): Add d-exp.o.
(local-maintainer-clean): Delete d-exp.c.
* d-exp.y: New file.
* d-lang.h (d_parse): New declaration.
(d_error): New declaration.
* d-lang.c (d_op_print_tab): Add entry for BINOP_CONCAT and BINOP_EXP.
Set BINOP_EQUAL and BINOP_NOTEQUAL to same precedence as other
PREC_ORDER operators.
(d_language_defn): Use d_parse, d_error instead of c_parse, c_error.
gdb/testsuite/
2014-06-05 Iain Buclaw <ibuclaw@gdcproject.org>
* gdb.dlang/expression.exp: New file.
Function any_running isn't used. This patch is to remove it.
Rebuild GDB for linux and mingw.
gdb:
2014-06-19 Yao Qi <yao@codesourcery.com>
* gdbthread.h (any_running): Remove the declaration.
* thread.c (any_running): Remove.
This patch is to change field state's type to 'enum thread_state', and
replace RUNNING with THREAD_RUNNING and STOPPED with THREAD_STOPPED
respectively in comments.
gdb:
2014-06-19 Yao Qi <yao@codesourcery.com>
* gdbthread.h (struct thread_info) <state>: Change its type to
'enum thread_state'. Update comments.
Running gdb.threads/thread-execl.exp with scheduler-locking set to
"step" reveals a problem:
(gdb) next^M
[Thread 0x7ffff7fda700 (LWP 27168) exited]^M
[New LWP 27168]^M
[Thread 0x7ffff74ee700 (LWP 27174) exited]^M
process 27168 is executing new program: /home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.threads/thread-execl^M
[Thread debugging using libthread_db enabled]^M
Using host libthread_db library "/lib64/libthread_db.so.1".^M
infrun.c:5225: internal-error: switch_back_to_stepped_thread: Assertion `!schedlock_applies (1)' failed.^M
A problem internal to GDB has been detected,^M
further debugging may prove unreliable.^M
Quit this debugging session? (y or n) FAIL: gdb.threads/thread-execl.exp: schedlock step: get to main in new image (GDB internal error)
The assertion is correct. The issue is that GDB is mistakenly trying
to switch back to an exited thread, that was previously stepping when
it exited. This is exactly the sort of thing the test wants to make
sure doesn't happen:
# Now set a breakpoint at `main', and step over the execl call. The
# breakpoint at main should be reached. GDB should not try to revert
# back to the old thread from the old image and resume stepping it
We don't see this bug with schedlock off only because a different
sequence of events makes GDB manage to delete the thread instead of
marking it exited.
This particular internal error can be fixed by making the loop over
all threads in switch_back_to_stepped_thread skip exited threads.
But, looking over other ALL_THREADS users, all either can or should be
skipping exited threads too. So for simplicity, this patch replaces
ALL_THREADS with a new macro that skips exited threads itself, and
updates everything to use it.
Tested on x86_64 Fedora 20.
gdb/
2014-06-19 Pedro Alves <palves@redhat.com>
* gdbthread.h (ALL_THREADS): Delete.
(ALL_NON_EXITED_THREADS): New macro.
* btrace.c (btrace_free_objfile): Use ALL_NON_EXITED_THREADS
instead of ALL_THREADS.
* infrun.c (find_thread_needs_step_over)
(switch_back_to_stepped_thread): Use ALL_NON_EXITED_THREADS
instead of ALL_THREADS.
* record-btrace.c (record_btrace_open)
(record_btrace_stop_recording, record_btrace_close)
(record_btrace_is_replaying, record_btrace_resume)
(record_btrace_find_thread_to_move, record_btrace_wait): Likewise.
* remote.c (append_pending_thread_resumptions): Likewise.
* thread.c (thread_apply_all_command): Likewise.
gdb/testsuite/
2014-06-19 Pedro Alves <palves@redhat.com>
* gdb.threads/thread-execl.exp (do_test): New procedure, factored
out from ...
(top level): ... here. Iterate running tests under different
scheduler-locking settings.
Three target_ops functions in i386-nat.c call other local target_ops
functions. This commit changes those functions to call the functions
in i386-dregs.c directly.
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* i386-nat.c (i386_stopped_by_watchpoint):
Use i386_dr_stopped_by_watchpoint.
(i386_insert_hw_breakpoint): Use i386_dr_insert_watchpoint.
(i386_remove_hw_breakpoint): Use i386_dr_remove_watchpoint.
This commit refactors i386_{insert,remove}_hw_breakpoint
to call i386_{insert,remove}_watchpoint rather than
duplicating functionality.
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* i386-nat.c (i386_insert_hw_breakpoint): Use
i386_insert_watchpoint.
(i386_remove_hw_breakpoint): Use i386_remove_watchpoint.
The above commit did two things:
1) A number of functions were renamed and made nonstatic.
2) A number of other functions were renamed only.
This commit reverts #1 but not #2. In addition, prototypes for
functions now remade static have been removed from i386-dregs.h.
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* i386-nat.c (i386_dr_show): Renamed to
i386_show_dr and made static. All uses updated.
(i386_dr_length_and_rw_bits): Renamed to
i386_length_and_rw_bits and made static.
All uses updated.
(i386_dr_insert_aligned_watchpoint): Renamed to
i386_insert_aligned_watchpoint and made static.
All uses updated.
(i386_dr_remove_aligned_watchpoint): Renamed to
i386_remove_aligned_watchpoint and made static.
All uses updated.
(i386_dr_update_inferior_debug_regs): Renamed to
i386_update_inferior_debug_regs and made static.
All uses updated.
* nat/i386-dregs.h (i386_dr_show): Removed.
(i386_dr_length_and_rw_bits): Likewise.
(i386_dr_insert_aligned_watchpoint): Likewise.
(i386_dr_remove_aligned_watchpoint): Likewise.
(i386_dr_update_inferior_debug_regs): Likewise.
gdb/gdbserver/
2014-06-19 Gary Benson <gbenson@redhat.com>
* i386-low.c (i386_dr_show): Renamed to
i386_show_dr and made static. All uses updated.
(i386_dr_length_and_rw_bits): Renamed to
i386_length_and_rw_bits and made static.
All uses updated.
(i386_dr_insert_aligned_watchpoint): Renamed to
i386_insert_aligned_watchpoint and made static.
All uses updated.
(i386_dr_remove_aligned_watchpoint): Renamed to
i386_remove_aligned_watchpoint and made static.
All uses updated.
(i386_dr_update_inferior_debug_regs): Renamed to
i386_update_inferior_debug_regs and made static.
All uses updated.
This commit wraps calls to the demangler with a segmentation fault
handler. The first time a segmentation fault is caught a core file
is generated and the user is prompted to file a bug and offered the
choice to exit or to continue their GDB session. A maintainence
option is provided to allow the user to disable the crash handler
if required.
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* configure.ac [AC_CHECK_FUNCS] <sigaltstack>: New check.
* configure: Regenerate.
* config.in: Likewise.
* main.c (signal.h): New include.
(setup_alternate_signal_stack): New function.
(captured_main): Call the above.
* cp-support.c (signal.h): New include.
(catch_demangler_crashes): New flag.
(SIGJMP_BUF): New define.
(SIGSETJMP): Likewise.
(SIGLONGJMP): Likewise.
(gdb_demangle_jmp_buf): New static global.
(gdb_demangle_attempt_core_dump): Likewise.
(gdb_demangle_signal_handler): New function.
(gdb_demangle): If catch_demangler_crashes is set, install the
above signal handler before calling bfd_demangle, and restore
the original signal handler afterwards. Display the offending
symbol and call demangler_warning the first time a segmentation
fault is caught.
(_initialize_cp_support): New maint set/show command.
gdb/doc/
2014-06-19 Gary Benson <gbenson@redhat.com>
* gdb.texinfo (Maintenance Commands): Document new
"maint set/show catch-demangler-crashes" option.
This commit exposes the functions that dump core outside utils.c.
can_dump_core gains a new parameter, "limit_kind", to allow either
the soft or hard limit to be checked, and its printing has separated
into the new function warn_cant_dump_core. The new function
can_dump_core_warn does what can_dump_core previously did (print and
warn).
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* utils.h (resource_limit_kind): New enum.
(can_dump_core): New declaration.
(warn_cant_dump_core): Likewise.
(dump_core): Likewise.
* utils.c (dump_core): Made nonstatic. Added new
parameter "limit_kind".
(can_dump_core): Made nonstatic. Moved printing code to...
(warn_cant_dump_core): New function.
(can_dump_core_warn): Likewise.
(internal_vproblem): Replace calls to can_dump_core with
calls to can_dump_core_warn. Supply new argument to each.
This commit adds a new category of internal problem for demangler
warnings. Demangler warnings behave in much the same way as internal
warnings except that they do not create core files and no option to
change this is presented to the user.
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* utils.h (demangler_vwarning): New declaration.
(demangler_warning): Likewise.
* utils.c (struct internal_problem)
<user_settable_should_quit>: New field.
<user_settable_should_dump_core>: Likewise
(internal_error_problem): Add values for above new fields.
(internal_warning_problem): Likewise.
(demangler_warning_problem): New static global.
(demangler_vwarning): New function.
(demangler_warning): Likewise.
(add_internal_problem_command): Selectively add commands.
(_initialize_utils): New internal problem command.
* maint.c (maintenance_demangler_warning): New function.
(_initialize_maint_cmds): New command.
gdb/doc/
2014-06-19 Gary Benson <gbenson@redhat.com>
* gdb.texinfo (Maintenance Commands): Document new
"maint demangler-warning" command and new
"maint set/show demangler-warning" option.
with type DW_FORM_string, which is wrong.
GDB was using that information to load data as strings, and then
proceeded to use the string pointers as addresses.
Even then, the test was passing just fine, because we were lucky
enough to have the low_pc string pointer smaller than the high_pc
string pointer.
Two issues are fixed. The first one is the DW_FORM_string type. The
second one is adjusting the addresses so that they are non-zero,
since GDB doesn't like seeing 0 in these fields due to a check
contained in dwarf2_get_pc_bounds:
if (low == 0 && !dwarf2_per_objfile->has_section_at_zero)
return 0;
With both fixes, the testcase passes deterministically.
2014-06-19 Luis Machado <lgustavo@codesourcery.com>
* gdb.cp/nsalias.exp: Set type of low_pc and high_pc entries
to DW_FORM_addr and use non-zero addresses.
This changes general_symbol_info to make "common_block" const.
2014-06-18 Tom Tromey <tromey@redhat.com>
* f-valprint.c (info_common_command_for_block): Update.
* symtab.h (struct general_symbol_info) <common_block>: Now
const.
Generally, the blockvector ought to be readonly. So, this patch makes
the blockvector const in the symtab, and also changes various
blockvector APIs to be const.
This patch has a couple of spots that cast away const. I consider
these to be ok because they occur in mdebugread and are used while
constructing the blockvector. I have added comments at these spots.
2014-06-18 Tom Tromey <tromey@redhat.com>
* symtab.h (struct symtab) <blockvector>: Now const.
* ada-lang.c (ada_add_global_exceptions): Update.
* buildsym.c (augment_type_symtab): Update.
* dwarf2read.c (dw2_lookup_symbol): Update.
* jit.c (finalize_symtab): Update.
* jv-lang.c (add_class_symtab_symbol): Update.
* mdebugread.c (parse_symbol, add_block, sort_blocks, new_symtab):
Update.
* objfiles.c (objfile_relocate1): Update.
* psymtab.c (lookup_symbol_aux_psymtabs)
(maintenance_check_psymtabs): Update.
* python/py-symtab.c (stpy_global_block, stpy_static_block):
Update.
* spu-tdep.c (spu_catch_start): Update.
* symmisc.c (dump_symtab_1): Update.
* symtab.c (lookup_global_symbol_from_objfile)
(lookup_symbol_aux_objfile, lookup_symbol_aux_quick)
(basic_lookup_transparent_type_quick)
(basic_lookup_transparent_type, find_pc_sect_symtab)
(find_pc_sect_line, search_symbols): Update.
* block.c (find_block_in_blockvector): Make "bl" const.
(blockvector_for_pc_sect, blockvector_for_pc): Make return type
const.
(blockvector_contains_pc): Make "bv" const.
(block_for_pc_sect): Update.
* block.h (blockvector_for_pc, blockvector_for_pc_sect)
(blockvector_contains_pc): Update.
* breakpoint.c (resolve_sal_pc): Update.
* inline-frame.c (block_starting_point_at): Update.
This changes complete_line to take a const parameter.
2014-06-18 Tom Tromey <tromey@redhat.com>
* completer.c (complete_line): Make "line_buffer" const.
* completer.h (complete_line): Update.
This removes an unneeded const cast from symtab.c:add_macro_name.
2014-06-18 Tom Tromey <tromey@redhat.com>
* symtab.c (add_macro_name): Remove unneeded cast.
This changes a parameter of parse_cli_boolean_value to be const.
2014-06-18 Tom Tromey <tromey@redhat.com>
* cli/cli-setshow.h (parse_cli_boolean_value): Update.
* cli/cli-setshow.c (parse_cli_boolean_value): Make "arg" const.
This constifies an argument to info_probes_for_ops.
2014-06-18 Tom Tromey <tromey@redhat.com>
* probe.c (info_probes_for_ops): Make "arg" const.
* probe.h (info_probes_for_ops): Update.
gdb/testsuite/
PR gdb/17017
* gdb.python/py-xmethods.cc: Add global function call counters and
increment them in their respective functions. Remove "cout"
statements.
* gdb.python/py-xmethods.exp: Make tests check the global function
call counters instead of depending on inferior IO.
Using the test program gdb.base/foll-fork.c, with follow-fork-mode set to
"child" and detach-on-fork set to "off", stepping or running past the fork
call results in the child process running to completion, when it should
just finish the single step. In addition, the breakpoint is not removed
from the parent process, so if it is resumed it receives a SIGTRAP.
Cause:
No matter what the setting for detach-on-fork, when stepping past a fork,
the single-step breakpoint (step_resume_breakpoint) is not handled
correctly in the parent. The SR breakpoint is cloned for the child
process, but before the clone is associated with the child it is treated as
a duplicate of the original, associated wth the parent. This results in
the insertion state of the original SR breakpoint and the clone being
"swapped" by breakpoint.c:update_global_location_list, so that the clone is
marked as inserted.
In the case where the parent is not detached, the two breakpoints remain in
that state. The breakpoint is never inserted in the child, because
although the cloned SR breakpoint is associated with the child, it is
marked as inserted. When the child is resumed, it runs to completion. The
breakpoint is never removed from the parent, so that if it is resumed after
the child exits, it gets a SIGTRAP.
Here is the sequence of events:
1) handle_inferior_event: FORK event is recognized.
2) handle_inferior_event: detach_breakpoints removes all breakpoints
from the child.
3) follow_fork: the parent SR breakpoint is cloned. Part of this procedure
is to call update_global_location_list, which swaps the insertion state of
the original and cloned SR breakpoints as part of ensuring that duplicate
breakpoints are only inserted once. At this point the original SR
breakpoint is not marked as inserted, and the clone is. The breakpoint is
actually inserted in the parent but not the child.
4) follow_fork: the original breakpoint is deleted by calling
delete_step_resume_breakpoint. Since the original is not marked as
inserted, the actual breakpoint remains in the parent process.
update_global_location_list is called again as part of the deletion. The
clone is still associated with the parent, but since it is marked as
enabled and inserted, the breakpoint is left in the parent.
5) follow_fork: if detach-on-fork is 'on', the actual breakpoint will be
removed from the parent in target_detach, based on the cloned breakpoint
still associated with the parent. Then the clone is no longer marked as
inserted. In follow_inferior_reset_breakpoints the clone is associated
with the child, and can be inserted.
If detach-on-fork is 'off', the actual breakpoint in the parent is never
removed (although the breakpoint had been deleted from the list). Since
the clone continues to be marked 'inserted', the SR breakpoint is never
inserted in the child.
Fix:
Set the cloned breakpoint as disabled from the moment it is created. This
is done by modifying clone_momentary_breakpoint to take an additional
argument, LOC_ENABLED, which is used as the value of the
bp_location->enabled member. The clone must be disabled at that point
because clone_momentary_breakpoint calls update_global_location_list, which
will swap treat the clone as a duplicate of the original breakpoint if it
is enabled.
All the calls to clone_momentary_breakpoint had to be modified to pass '1'
or '0'. I looked at implementing an enum for the enabled member, but
concluded that readability would suffer because there are so many places it
is used as a boolean, e.g. "if (bl->enabled)".
In follow_inferior_reset_breakpoints the clone is set to enabled once it
has been associated with the child process. With this, the bp_location
'inserted' member is maintained correctly throughout the follow-fork
procedure and the behavior is as expected.
The same treatment is given to the exception_resume_breakpoint when
following a fork.
Testing:
Ran 'make check' on Linux x64.
Along with the fix above, the coverage of the follow-fork test
gdb.base/foll-fork.exp was expanded to:
1) cover all the combinations of values for
follow-fork-mode and detach-on-fork
2) make sure that both user breakpoints and
single-step breakpoints are propagated
correctly to the child
3) check that the inferior list has the
expected contents after following the fork.
4) check that unfollowed, undetached inferiors
can be resumed.
gdb/
2014-06-18 Don Breazeal <donb@codesourcery.com>
* breakpoint.c (set_longjmp_breakpoint): Call
momentary_breakpoint_from_master with additional argument.
(set_longjmp_breakpoint_for_call_dummy): Call
momentary_breakpoint_from_master with additional argument.
(set_std_terminate_breakpoint): Call
momentary_breakpoint_from_master with additional argument.
(momentary_breakpoint_from_master): Add argument to function
definition and use it to initialize structure member flag.
(clone_momentary_breakpoint): Call
momentary_breakpoint_from_master with additional argument.
* infrun.c (follow_inferior_reset_breakpoints): Clear structure
member flags set in momentary_breakpoint_from_master.
gdb/testsuite/
2014-06-18 Don Breazeal <donb@codesourcery.com>
* gdb.base/foll-fork.exp (default_fork_parent_follow):
Deleted procedure.
(explicit_fork_parent_follow): Deleted procedure.
(explicit_fork_child_follow): Deleted procedure.
(test_follow_fork): New procedure.
(do_fork_tests): Replace calls to deleted procedures with
calls to test_follow_fork and reset GDB for subsequent
procedure calls.
This commit renames the functions that are to be shared.
Functions to be shared that were static are made nonstatic.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-nat.c (i386_show_dr): Renamed to
i386_dr_show and made nonstatic. All uses updated.
(i386_length_and_rw_bits): Renamed to
i386_dr_length_and_rw_bits and made nonstatic.
All uses updated.
(i386_insert_aligned_watchpoint): Renamed to
i386_dr_insert_aligned_watchpoint and made nonstatic.
All uses updated.
(i386_remove_aligned_watchpoint): Renamed to
i386_dr_remove_aligned_watchpoint and made nonstatic.
All uses updated.
(i386_update_inferior_debug_regs): Renamed to
i386_dr_update_inferior_debug_regs and made nonstatic.
All uses updated.
gdb/gdbserver/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-low.h (i386_low_insert_watchpoint): Renamed to
i386_dr_insert_watchpoint.
(i386_low_remove_watchpoint): Renamed to
i386_dr_remove_watchpoint.
(i386_low_region_ok_for_watchpoint): Renamed to
i386_dr_region_ok_for_watchpoint.
(i386_low_stopped_data_address): Renamed to
i386_dr_stopped_data_address.
(i386_low_stopped_by_watchpoint): Renamed to
i386_dr_stopped_by_watchpoint.
* i386-low.c (i386_show_dr): Renamed to
i386_dr_show and made nonstatic. All uses updated.
(i386_length_and_rw_bits): Renamed to
i386_dr_length_and_rw_bits and made nonstatic.
All uses updated.
(i386_insert_aligned_watchpoint): Renamed to
i386_dr_insert_aligned_watchpoint and made nonstatic.
All uses updated.
(i386_remove_aligned_watchpoint): Renamed to
i386_dr_remove_aligned_watchpoint and made nonstatic.
All uses updated.
(i386_update_inferior_debug_regs): Renamed to
i386_dr_update_inferior_debug_regs and made nonstatic.
All uses updated.
(i386_low_insert_watchpoint): Renamed to
i386_dr_insert_watchpoint. All uses updated.
(i386_low_remove_watchpoint): Renamed to
i386_dr_remove_watchpoint. All uses updated.
(i386_low_region_ok_for_watchpoint): Renamed to
i386_dr_region_ok_for_watchpoint. All uses updated.
(i386_low_stopped_data_address): Renamed to
i386_dr_stopped_data_address. All uses updated.
(i386_low_stopped_by_watchpoint): Renamed to
i386_dr_stopped_by_watchpoint. All uses updated.
This commit adds macros to abstract access to the i386_dr_low
function vector used by i386-nat.c. The macros are named so
as to match the names of the functions that do the same work
in gdbserver.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-nat.c (i386_dr_low_can_set_addr): New macro.
(i386_dr_low_can_set_control): Likewise.
(i386_dr_low_set_addr): Likewise.
(i386_dr_low_set_control): Likewise.
(i386_dr_low_get_addr): Likewise.
(i386_dr_low_get_status): Likewise.
(i386_dr_low_get_control): Likewise.
(i386_insert_aligned_watchpoint): Use new macros.
(i386_update_inferior_debug_regs): Likewise.
(i386_stopped_data_address): Likewise.
gdb/gdbserver/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-low.c (i386_dr_low_can_set_addr): New macro.
(i386_dr_low_can_set_control): Likewise.
(i386_insert_aligned_watchpoint): New check.
This commit synchronizes the i386_update_inferior_debug_regs functions
in i386-nat.c and i386-low.c.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-nat.c (i386_update_inferior_debug_regs) <state>:
New parameter. All uses updated.
gdb/gdbserver/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-low.c (i386_update_inferior_debug_regs) <inf_state>:
Renamed to state.
This commit renames maint_show_dr to debug_hw_points in i386-nat.c.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-nat.c (maint_show_dr): Renamed to debug_hw_points.
All uses updated.
This commit makes all error handling in i386-low.c use internal_error
rather than fatal and error.
gdb/gdbserver/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-low.c (i386_length_and_rw_bits): Use internal_error
instead of fatal and error.
(i386_handle_nonaligned_watchpoint): Likewise.
This commit synchronizes the debug printing code in i386-nat.c and
i386-low.c.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-nat.c (debug_printf): New macro.
(i386_get_debug_register_length): Likewise.
(TARGET_HAS_DR_LEN_8): Use above macro.
(i386_show_dr): Use debug_printf instead of puts_unfiltered
and printf_unfiltered. Use phex to format values.
gdb/gdbserver/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-low.c (i386_get_debug_register_length): New macro.
(TARGET_HAS_DR_LEN_8): Remove conditional. Use above macro.
(i386_show_dr): Use debug_printf instead of fprintf. Use
phex to format values.
This commit adds a const that was in i386-low.c but not in i386-nat.c.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-nat.c (i386_handle_nonaligned_watchpoint) <size_try_array>:
Make const.
