PowerPC64 gold and ld.bfd implement an indirect branch trampoline,
used when the destination of a branch exceeds a bounce through another
"b" instruction. When generating PIEs or shared libraries, the
addresses need dynamic relocations. This was implemented in gold
using a dedicated relocation section, but this means the relative
relocations for these addresses are not sorted properly with other
dynamic relative relocations: gold doesn't support merging relocation
sections, then sorting. Instead we need to use a single .rela.dyn
section.
This is done by increasing the size of rela_dyn_ during do_relax to
account for needed dynamic relocations, delaying adding the actual
relocations until the end of relaxation once the layout has
stabilised.
* powerpc.cc (Target_powerpc): Add rela_dyn_size_;
(update_current_size): New function.
(Target_powerpc::do_relax): Capture the size of rela_dyn_ at
the start of relaxation. Artifically increase its size during
relaxation to account for needed indirect branches, and add
those relocations at the end.
(Output_data_brlt_powerpc::rel_, reset_brlt_sizes),
(finalize_brlt_sizes, add_reloc, set_current_size): Delete.
(Target_powerpc::make_brlt_section): Don't make reloc section.
PowerPC gold adds relative dynamic relocs in do_relax. These aren't
accounted for in the value set in add_target_dynamic_tags, which is
called before do_relax. Provide a way of setting DT_RELCOUNT and
DT_RELACOUNT at the point where .dynamic is written.
* layout.cc (Layout::add_target_dynamic_tags): Add custom_relcount
parameter. Emit DT_RELCOUNT/RELACOUNT as a custom target handled
dynamic tag if set.
* layout.h(Layout::add_target_dynamic_tags): Update prototype.
* aarch64.cc (Target_aarch64::do_finalize_sections): Adjust
add_target_dynamic_tags call.
* arm.cc (Target_arm::do_finalize_sections): Likewise.
* i386.cc (Target_i386::do_finalize_sections): Likewise.
* mips.cc (Target_mips::do_finalize_sections): Likewise.
* s390.cc (Target_s390::do_finalize_sections): Likewise.
* sparc.cc (Target_sparc::do_finalize_sections): Likewise.
* tilegx.cc (Target_tilegx::do_finalize_sections): Likewise.
* x86_64.cc (Target_x86_64::do_finalize_sections): Likewise.
* powerpc.cc (Target_powerpc::do_finalize_sections): Likewise.
(Target_powerpc::do_dynamic_tag_custom_value): New function.
DT_RELACOUNT was calculated incorrectly, and relative relocs not
sorted as they should be to the start of .rela.dyn, due to adding one
particular class of dynamic reloc using the wrong "add" method.
* powerpc.cc (Target_powerpc::Scan::global): Add relative
dyn relocs for ADDR64 and similar using add_global_relative.
In commit 0961e63157, the fix for PR30217, make_lplt_section and
make_brlt_section were changed to use rela_dyn_ rather than their own
separate dynamic reloc sections. This fails miserably whenever brlt_
is needed for long branches, due to needing to iterate sizing and thus
reset brlt_ sizes.
PR 30536
PR 30217
* powerpc.cc (Target_powerpc::make_brlt_section): Don't use
rela_dyn_.
For MIPS64r6 ports, Debian as an example, `mipsisa64r6el` is
used as the cpu name in triple.
Let's recognize them by `mips*64*(el)`.
For 64bit Ports, like Debian's mips64el and mips64r6el ports,
`gnuabi64` is used as the abi section.
Let's use N64 abi by default for the triple with gnuabi64.
PR 30187
* options.h (class General_options): Add enable-linker-version.
* layout.cc (Layout::create_gold_note): If linker-version is enabled put the version string into the .comment section.
glibc's ld.so ignores local dynamic symbols. It's been that way
forever. We therefore can't use them on dynamic relocations. Fixing
that problem uncovered another problem in sorting of dynamic relocs,
caused no doubt by copying make_iplt_section (where we don't want
reloc sorting by the generic gold function, we want iplt relocs last)
to make_lplt_section (where we do want sorting).
PR 30217
* powerpc.cc (branch_needs_plt_entry): New function.
(Target_powerpc::plt_off): Use it here..
(Target_powerpc::Scan::global): ..and here to correct PLT16 reloc
handling for forced-local global symbols.
(Output_data_plt_powerpc::add_entry): Rename "stash"
parameter "is_local". Emit relative relocs for globals that
are forced local, and don't set_needs_dynsym_entry.
(Target_powerpc::make_lplt_section): Don't create a separate
reloc section, use rela_dyn.
(Target_powerpc::make_brlt_section): Likewise.
We already use C99's __func__ in places, use it more generally. This
patch doesn't change uses in the testsuite. I've also left one in
gold.h that is protected by GCC_VERSION < 4003. If any of the
remaining uses bothers anyone I invite patches.
bfd/
* bfd-in.h: Replace __FUNCTION__ with __func__.
* elf32-bfin.c: Likewise.
* elfnn-aarch64.c: Likewise.
* elfxx-sparc.c: Likewise.
* bfd-in2.h: Regenerate.
gas/
* config/tc-cris.c: Replace __FUNCTION__ with __func__.
* config/tc-m68hc11.c: Likewise.
* config/tc-msp430.c: Likewise.
gold/
* dwp.h: Replace __FUNCTION__ with __func__.
* gold.h: Likewise, except for use inside GCC_VERSION < 4003.
ld/
* emultempl/pe.em: Replace __FUNCTION__ with __func__.
* emultempl/pep.em: Likewise.
* pe-dll.c: Likewise.
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
Since MPX support has been removed from x86-64 psABI, remove BND from
64-bit IBT PLT by using 32-bit IBT PLT.
PR gold/29851
* x86_64.cc (Output_data_plt_x86_64_ibt<32>::first_plt_entry):
Renamed to ...
(Output_data_plt_x86_64_ibt<size>::first_plt_entry): This.
(Output_data_plt_x86_64_ibt<64>::first_plt_entry): Removed.
(Output_data_plt_x86_64_ibt<size>::do_fill_first_plt_entry):
Drop the size == 32 check.
(Output_data_plt_x86_64_ibt<32>::plt_entry): Renamed to ...
(Output_data_plt_x86_64_ibt<size>::plt_entry): This.
(Output_data_plt_x86_64_ibt<64>::plt_entry): Removed.
(Output_data_plt_x86_64_ibt<32>::aplt_entry): Renamed to ...
(Output_data_plt_x86_64_ibt<size>::aplt_entry): This.
(Output_data_plt_x86_64_ibt<64>::aplt_entry): Removed.
(Output_data_plt_x86_64_ibt<size>::do_fill_plt_entry): Drop the
size == 32 check.
(Output_data_plt_x86_64_ibt<size>::fill_aplt_entry): Likewise.
This option compresses output debug sections with zstd and sets ch_type
to ELFCOMPRESS_ZSTD. Latest gdb and lldb support ELFCOMPRESS_ZSTD.
There will be an error if zstd is not enabled at configure time.
error: --compress-debug-sections=zstd: gold is not built with zstd support
Apparently some distros have a nagging egrep that helpfully tells you
egrep is deprecated and to use "grep -E". The nag message causes a ld
testsuite failure. What's more the advice isn't that good. The "-E"
flag may not be available with older versions of grep.
This patch fixes bare invocation of egrep within binutils, replacing
it with the autoconf $EGREP or with grep.
config/
* lib-ld.m4 (AC_LIB_PROG_LD_GNU): Require AC_PROG_EGREP and
invoke $EGREP.
(AC_LIB_PROG_LD): Likewise.
binutils/
* configure: Regenerate.
* embedspu.sh: Replace egrep with grep.
gold/
* testsuite/Makefile.am (flagstest_compress_debug_sections.check):
Replace egrep with grep.
* testsuite/Makefile.in: Regenerate.
* testsuite/bnd_ifunc_1.sh: Replace egrep with $EGREP.
* testsuite/bnd_ifunc_2.sh: Likewise.
* testsuite/bnd_plt_1.sh: Likewise.
* testsuite/discard_locals_test.sh: Likewise.
* testsuite/gnu_property_test.sh: Likewise.
* testsuite/no_version_test.sh: Likewise.
* testsuite/pr18689.sh: Likewise.
* testsuite/pr26936.sh: Likewise.
* testsuite/retain.sh: Likewise.
* testsuite/split_i386.sh: Likewise.
* testsuite/split_s390.sh: Likewise.
* testsuite/split_x32.sh: Likewise.
* testsuite/split_x86_64.sh: Likewise.
* testsuite/ver_test_pr16504.sh: Likewise.
intl/
* configure: Regenerate.
ld/
* testsuite/ld-elfvers/vers.exp (test_ar): Replace egrep with grep.
Clang generates a warning if there is a variable that is set but not used
otherwise ("-Wunused-but-set-variable"). On the default configuration, it
causes a build failure (unless "--disable-werror" is specified).
Because the cause of this error is in the Bison-generated code
($(srcdir)/gold/yyscript.y -> $(builddir)/gold/yyscript.c),
this commit suppresses this warning ("-Wunused-but-set-variable") by placing
DIAGNOSTIC_IGNORE_UNUSED_BUT_SET_VARIABLE macro at the end of user
prologue on yyscript.y.
* yyscript.y: Suppress -Wunused-but-set-variable warning on
the Bison-generated code.
We were attempting to set a BSS style section contents.
PR 29542
* powerpc.cc (Output_data_plt_powerpc::do_write): Don't set .plt,
.iplt or .lplt section contents when position independent.
Some components of GNU Binutils will pass "-Wstack-usage=262144" when
"GCC >= 5.0" is detected. However, Clang does not support "-Wstack-usage",
despite that related configuration part in bfd/warning.m4 handles the latest
Clang (15.0.0 as of this writing) as "GCC >= 5.0".
The option "-Wstack-usage" was ignored when the first version of Clang is
released but even this "ignoring" behavior is removed before Clang 4.0.0.
So, if we give Clang "-Wstack-usage=262144", it generates a warning, making
the build failure.
This commit checks "__clang__" macro to prevent adding the option if the
compiler is identified as Clang.
bfd/ChangeLog:
* warning.m4: Stop appending "-Wstack-usage=262144" option when
compiled with Clang.
* configure: Regenerate.
binutils/ChangeLog:
* configure: Regenerate.
gas/ChangeLog:
* configure: Regenerate.
gold/ChangeLog:
* configure: Regenerate.
gprof/ChangeLog:
* configure: Regenerate.
ld/ChangeLog:
* configure: Regenerate.
opcodes/ChangeLog:
* configure: Regenerate.
Prior to the inline plt call support (commit 08be322439), the only
local syms with plt entries were local ifunc symbols. There shouldn't
be stubs for other local symbols so don't look for them. The patch
also fixes minor bugs in get_reference_flags; Many relocs are valid
only for ppc64 and a couple only for ppc32.
PR 29462
* powerpc.cc (Target_powerpc::Relocate::relocate): Rename
use_plt_offset to pltcal_to_direct, invert logic. For relocs
not used with inline plt sequences against local symbols, only
look for stubs when the symbol is an ifunc.
(Target_powerpc::Scan::get_reference_flags): Correct reloc
handling for relocs not valid for both 32-bit and 64-bit.
Following the same format as the implementation in ld:
9e2bb0cb5e
Generate a .note.package FDO package metadata ELF note, following
the spec: https://systemd.io/ELF_PACKAGE_METADATA/
If the jansson library is available at build time (and it is explicitly
enabled), link ld to it, and use it to validate that the input is
correct JSON, to avoid writing garbage to the file. The
configure option --enable-jansson has to be used to explicitly enable
it (error out when not found). This allows bootstrappers (or others who
are not interested) to seamlessly skip it without issues.
elfcpp/
* elfcpp.h: Add FDO_PACKAGING_METADATA note type.
gold/
* Makefile.am: Add jansson flags and libraries.
* configure.ac: Check for jansson library.
* layout.cc (Layout::create_notes): Call create_package_metadata().
(Layout::create_package_metadata): New function.
* layout.h (Layout::create_package_metadata): New function.
(Layout::package_metadata_note_): New data member.
* options.h (class General_options): Add --package-metadata option.
* testsuite/Makefile.am (object_unittest): Add jansson libraries.
(binary_unittest): Likewise.
(leb128_unittest): Likewise.
(overflow_unittest): Likewise.
(package_metadata_test): New test.
* testsuite/package_metadata_main.c: New test source.
pr17704a_test.s is a x86_64 assembly file, but it invokes IA32 exit
syscall with "int 0x80". This causes a segfault on kernels with
CONFIG_IA32_EMULATION disabled.
gold/
* testsuite/pr17704a_test.s (_start): Invoke x86_64 exit syscall
instead of its IA32 counterpart.
The gold subdir doesn't actually have a manual, so this hack doesn't
do anything. Plus the automake cygnus option was removed years ago
by Simon in d0ac1c4488 ("Bump to autoconf 2.69 and
automake 1.15.1"). So delete it here.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
The fixes gold failures to handle inline PLT sequences properly.
PowerPC gold was always turning these back into direct calls due to
gsym->use_plt_offset() returning false. This is fixed for dynamic
linking by correcting get_reference_flags, and for static linking by
overriding use_plt_offset() in relocate(). The rest of the patch
revolves around needing to create PLT entries for inline PLT calls
when statically linking (for gcc -mlongcall). The lplt section
handled that for local symbols, now it does globals too.
* powerpc.cc (Target_powerpc::plt_off): Return proper section
for static link.
(Target_powerpc::symval_for_branch): Make public.
(Target_powerpc::make_lplt_section): Add Symbol_table* param.
Adjust all calls.
(Target_powerpc::make_local_plt_entry): Likewise.
(Target_powerpc::make_local_plt_entry): New variant for global syms.
(Powerpc_relobj::do_relocate_sections): Don't write lplt contents.
(Output_data_plt_powerpc::do_write): Write lplt contents here.
(Output_data_plt_powerpc::Output_data_plt_powerpc): Save
symbol table pointer. Adjust all uses.
(Output_data_plt_powerpc::add_entry): Add stash parameter. Don't
do dynamic reloc handling when no reloc section. Save symbol
for local plt entries.
(Output_data_plt_powerpc::add_local_entry): Save symbol.
(Output_data_plt_powerpc::Local_plt_ent): New class.
(Output_data_plt_powerpc::sym_ents_): New vector.
(Target_powerpc::Scan::get_reference_flags): Return
FUNCTION_CALL|RELATIVE_REF for inline plt relocs.
(Target_powerpc::Scan::global): Make entries in lplt for inline
plt call relocation symbols.
(Target_powerpc::Relocate::relocate): Rename has_plt_offset to
use_plt_offset. Set use_plt_offset for inline plt relocs.
Place the .note.gnu.property section before all other note sections to
avoid being placed between other note sections with different alignments.
PR gold/28494
* layout.cc (Layout::create_note): Set order to ORDER_PROPERTY_NOTE
for the .note.gnu.property section.
* layout.h (Output_section_order): Add ORDER_PROPERTY_NOTE.
