770 Commits

Author	SHA1	Message	Date
Alan Modra	fd3619828e	bfd_section_* macros ... This large patch removes the unnecessary bfd parameter from various bfd section macros and functions. The bfd is hardly ever used and if needed for the bfd_set_section_* or bfd_rename_section functions can be found via section->owner except for the com, und, abs, and ind std_section special sections. Those sections shouldn't be modified anyway. The patch also removes various bfd_get_section_<field> macros, replacing their use with bfd_section_<field>, and adds bfd_set_section_lma. I've also fixed a minor bug in gas where compressed section renaming was done directly rather than calling bfd_rename_section. This would have broken bfd_get_section_by_name and similar functions, but that hardly mattered at such a late stage in gas processing. bfd/ * bfd-in.h (bfd_get_section_name, bfd_get_section_vma), (bfd_get_section_lma, bfd_get_section_alignment), (bfd_get_section_size, bfd_get_section_flags), (bfd_get_section_userdata): Delete. (bfd_section_name, bfd_section_size, bfd_section_vma), (bfd_section_lma, bfd_section_alignment): Lose bfd parameter. (bfd_section_flags, bfd_section_userdata): New. (bfd_is_com_section): Rename parameter. * section.c (bfd_set_section_userdata, bfd_set_section_vma), (bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section), (bfd_set_section_size): Delete bfd parameter, rename section parameter. (bfd_set_section_lma): New. * bfd-in2.h: Regenerate. * mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param, update callers. * aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h, * elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c, * elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c, * elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c, * elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c, * elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c, * mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c, * peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c, * xcofflink.c: Update throughout for bfd section macro and function changes. binutils/ * addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c, * objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c, * od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c, * resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update throughout for bfd section macro and function changes. gas/ * as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c, * read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c, * config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c, * config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c, * config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c, * config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c, * config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c, * config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c, * config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c, * config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c, * config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c, * config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c, * config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c, * config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c, * config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c, * config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c, * config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c, * config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c, * config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c, * config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c, * config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c, * config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c, * config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for bfd section macro and function changes. * write.c (compress_debug): Use bfd_rename_section. gdb/ * aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c, * coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c, * dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c, * exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h, * hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c, * i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c, * maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c, * mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c, * objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c, * ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c, * rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c, * s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c, * solib-spu.c, * solib-svr4.c, * solib-target.c, * spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c, * symmisc.c, * symtab.c, * target.c, * windows-nat.c, * xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c, * mi/mi-interp.c: Update throughout for bfd section macro and function changes. * gcore (gcore_create_callback): Use bfd_set_section_lma. * spu-tdep.c (spu_overlay_new_objfile): Likewise. gprof/ * corefile.c, * symtab.c: Update throughout for bfd section macro and function changes. ld/ * ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c, * emultempl/aarch64elf.em, * emultempl/aix.em, * emultempl/armcoff.em, * emultempl/armelf.em, * emultempl/cr16elf.em, * emultempl/cskyelf.em, * emultempl/m68hc1xelf.em, * emultempl/m68kelf.em, * emultempl/mipself.em, * emultempl/mmix-elfnmmo.em, * emultempl/mmo.em, * emultempl/msp430.em, * emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em, * emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update throughout for bfd section macro and function changes. libctf/ * ctf-open-bfd.c: Update throughout for bfd section macro changes. opcodes/ * arc-ext.c: Update throughout for bfd section macro changes. sim/ * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c, * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c, * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c, * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c, * rx/trace.c: Update throughout for bfd section macro changes.	2019-09-19 09:40:13 +09:30
Christian Biesinger	491144b5e2	Change boolean options to bool instead of int ... This is for add_setshow_boolean_cmd as well as the gdb::option interface. gdb/ChangeLog: 2019-09-17 Christian Biesinger <cbiesinger@google.com> * ada-lang.c (ada_ignore_descriptive_types_p): Change to bool. (print_signatures): Likewise. (trust_pad_over_xvs): Likewise. * arch/aarch64-insn.c (aarch64_debug): Likewise. * arch/aarch64-insn.h (aarch64_debug): Likewise. * arm-linux-nat.c (arm_apcs_32): Likewise. * arm-linux-tdep.c (arm_apcs_32): Likewise. * arm-nbsd-nat.c (arm_apcs_32): Likewise. * arm-tdep.c (arm_debug): Likewise. (arm_apcs_32): Likewise. * auto-load.c (debug_auto_load): Likewise. (auto_load_gdb_scripts): Likewise. (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * auto-load.h (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * breakpoint.c (disconnected_dprintf): Likewise. (breakpoint_proceeded): Likewise. (automatic_hardware_breakpoints): Likewise. (always_inserted_mode): Likewise. (target_exact_watchpoints): Likewise. (_initialize_breakpoint): Update. * breakpoint.h (target_exact_watchpoints): Change to bool. * btrace.c (maint_btrace_pt_skip_pad): Likewise. * cli/cli-cmds.c (trace_commands): Likewise. * cli/cli-cmds.h (trace_commands): Likewise. * cli/cli-decode.c (add_setshow_boolean_cmd): Change int* argument to bool*. * cli/cli-logging.c (logging_overwrite): Change to bool. (logging_redirect): Likewise. (debug_redirect): Likewise. * cli/cli-option.h (option_def) <boolean>: Change return type to bool*. (struct boolean_option_def) <get_var_address_cb_>: Change return type to bool. <boolean_option_def>: Update. (struct flag_option_def): Change default type of Context to bool from int. <flag_option_def>: Change return type of var_address_cb_ to bool*. * cli/cli-setshow.c (do_set_command): Cast to bool* instead of int*. (get_setshow_command_value_string): Likewise. * cli/cli-style.c (cli_styling): Change to bool. (source_styling): Likewise. * cli/cli-style.h (source_styling): Likewise. (cli_styling): Likewise. * cli/cli-utils.h (struct qcs_flags) <quiet, cont, silent>: Change to bool. * command.h (var_types): Update comment. (add_setshow_boolean_cmd): Change int* var argument to bool*. * compile/compile-cplus-types.c (debug_compile_cplus_types): Change to bool. (debug_compile_cplus_scopes): Likewise. * compile/compile-internal.h (compile_debug): Likewise. * compile/compile.c (compile_debug): Likewise. (struct compile_options) <raw>: Likewise. * cp-support.c (catch_demangler_crashes): Likewise. * cris-tdep.c (usr_cmd_cris_version_valid): Likewise. (usr_cmd_cris_dwarf2_cfi): Likewise. * csky-tdep.c (csky_debug): Likewise. * darwin-nat.c (enable_mach_exceptions): Likewise. * dcache.c (dcache_enabled_p): Likewise. * defs.h (info_verbose): Likewise. * demangle.c (demangle): Likewise. (asm_demangle): Likewise. * dwarf-index-cache.c (debug_index_cache): Likewise. * dwarf2-frame.c (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2read.c (check_physname): Likewise. (use_deprecated_index_sections): Likewise. (dwarf_always_disassemble): Likewise. * eval.c (overload_resolution): Likewise. * event-top.c (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * event-top.h (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * exec.c (write_files): Likewise. * fbsd-nat.c (debug_fbsd_lwp): Likewise (debug_fbsd_nat): Likewise. * frame.h (struct frame_print_options) <print_raw_frame_arguments>: Likewise. (struct set_backtrace_options) <backtrace_past_main>: Likewise. <backtrace_past_entry> Likewise. * gdb-demangle.h (demangle): Likewise. (asm_demangle): Likewise. * gdb_bfd.c (bfd_sharing): Likewise. * gdbcore.h (write_files): Likewise. * gdbsupport/common-debug.c (show_debug_regs): Likewise. * gdbsupport/common-debug.h (show_debug_regs): Likewise. * gdbthread.h (print_thread_events): Likewise. * gdbtypes.c (opaque_type_resolution): Likewise. (strict_type_checking): Likewise. * gnu-nat.c (gnu_debug_flag): Likewise. * guile/scm-auto-load.c (auto_load_guile_scripts): Likewise. * guile/scm-param.c (pascm_variable): Add boolval. (add_setshow_generic): Update. (pascm_param_value): Update. (pascm_set_param_value_x): Update. * hppa-tdep.c (hppa_debug): Change to bool.. * infcall.c (may_call_functions_p): Likewise. (coerce_float_to_double_p): Likewise. (unwind_on_signal_p): Likewise. (unwind_on_terminating_exception_p): Likewise. * infcmd.c (startup_with_shell): Likewise. * inferior.c (print_inferior_events): Likewise. * inferior.h (startup_with_shell): Likewise. (print_inferior_events): Likewise. * infrun.c (step_stop_if_no_debug): Likewise. (detach_fork): Likewise. (debug_displaced): Likewise. (disable_randomization): Likewise. (non_stop): Likewise. (non_stop_1): Likewise. (observer_mode): Likewise. (observer_mode_1): Likewise. (set_observer_mode): Update. (sched_multi): Change to bool. * infrun.h (debug_displaced): Likewise. (sched_multi): Likewise. (step_stop_if_no_debug): Likewise. (non_stop): Likewise. (disable_randomization): Likewise. * linux-tdep.c (use_coredump_filter): Likewise. (dump_excluded_mappings): Likewise. * linux-thread-db.c (auto_load_thread_db): Likewise. (check_thread_db_on_load): Likewise. * main.c (captured_main_1): Update. * maint-test-options.c (struct test_options_opts) <flag_opt, xx1_opt, xx2_opt, boolean_opt>: Change to bool. * maint-test-settings.c (maintenance_test_settings_boolean): Likewise. * maint.c (maintenance_profile_p): Likewise. (per_command_time): Likewise. (per_command_space): Likewise. (per_command_symtab): Likewise. * memattr.c (inaccessible_by_default): Likewise. * mi/mi-main.c (mi_async): Likewise. (mi_async_1): Likewise. * mips-tdep.c (mips64_transfers_32bit_regs_p): Likewise. * nat/fork-inferior.h (startup_with_shell): Likewise. * nat/linux-namespaces.c (debug_linux_namespaces): Likewise. * nat/linux-namespaces.h (debug_linux_namespaces): Likewise. * nios2-tdep.c (nios2_debug): Likewise. * or1k-tdep.c (or1k_debug): Likewise. * parse.c (parser_debug): Likewise. * parser-defs.h (parser_debug): Likewise. * printcmd.c (print_symbol_filename): Likewise. * proc-api.c (procfs_trace): Likewise. * python/py-auto-load.c (auto_load_python_scripts): Likewise. * python/py-param.c (union parmpy_variable): Add "bool boolval" field. (set_parameter_value): Update. (add_setshow_generic): Update. * python/py-value.c (copy_py_bool_obj): Change argument from int* to bool*. * python/python.c (gdbpy_parameter_value): Cast to bool* instead of int*. * ravenscar-thread.c (ravenscar_task_support): Change to bool. * record-btrace.c (record_btrace_target::store_registers): Update. * record-full.c (record_full_memory_query): Change to bool. (record_full_stop_at_limit): Likewise. * record-full.h (record_full_memory_query): Likewise. * remote-notif.c (notif_debug): Likewise. * remote-notif.h (notif_debug): Likewise. * remote.c (use_range_stepping): Likewise. (interrupt_on_connect): Likewise. (remote_break): Likewise. * ser-tcp.c (tcp_auto_retry): Likewise. * ser-unix.c (serial_hwflow): Likewise. * skip.c (debug_skip): Likewise. * solib-aix.c (solib_aix_debug): Likewise. * spu-tdep.c (spu_stop_on_load_p): Likewise. (spu_auto_flush_cache_p): Likewise. * stack.c (struct backtrace_cmd_options) <full, no_filters, hide>: Likewise. (struct info_print_options) <quiet>: Likewise. * symfile-debug.c (debug_symfile): Likewise. * symfile.c (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symfile.h (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symtab.c (basenames_may_differ): Likewise. (struct filename_partial_match_opts) <dirname, basename>: Likewise. (struct info_print_options) <quiet, exclude_minsyms>: Likewise. (struct info_types_options) <quiet>: Likewise. * symtab.h (demangle): Likewise. (basenames_may_differ): Likewise. * target-dcache.c (stack_cache_enabled_1): Likewise. (code_cache_enabled_1): Likewise. * target.c (trust_readonly): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. (auto_connect_native_target): Likewise. (target_stop_and_wait): Update. (target_async_permitted): Change to bool. (target_async_permitted_1): Likewise. (may_write_registers_1): Likewise. (may_write_memory_1): Likewise. (may_insert_breakpoints_1): Likewise. (may_insert_tracepoints_1): Likewise. (may_insert_fast_tracepoints_1): Likewise. (may_stop_1): Likewise. * target.h (target_async_permitted): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. * thread.c (struct info_threads_opts) <show_global_ids>: Likewise. (make_thread_apply_all_options_def_group): Change argument from int* to bool*. (thread_apply_all_command): Update. (print_thread_events): Change to bool. * top.c (confirm): Likewise. (command_editing_p): Likewise. (history_expansion_p): Likewise. (write_history_p): Likewise. (info_verbose): Likewise. * top.h (confirm): Likewise. (history_expansion_p): Likewise. * tracepoint.c (disconnected_tracing): Likewise. (circular_trace_buffer): Likewise. * typeprint.c (print_methods): Likewise. (print_typedefs): Likewise. * utils.c (debug_timestamp): Likewise. (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * utils.h (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * valops.c (overload_resolution): Likewise. * valprint.h (struct value_print_options) <prettyformat_arrays, prettyformat_structs, vtblprint, unionprint, addressprint, objectprint, stop_print_at_null, print_array_indexes, deref_ref, static_field_print, pascal_static_field_print, raw, summary, symbol_print, finish_print>: Likewise. * windows-nat.c (new_console): Likewise. (cygwin_exceptions): Likewise. (new_group): Likewise. (debug_exec): Likewise. (debug_events): Likewise. (debug_memory): Likewise. (debug_exceptions): Likewise. (useshell): Likewise. * windows-tdep.c (maint_display_all_tib): Likewise. * xml-support.c (debug_xml): Likewise.	2019-09-18 09:35:12 +09:00
Tom Tromey	d11d83f47b	Remove mips_pdr_data ... mips_pdr_data is unused, so this patch removes it. gdb/ChangeLog 2019-05-08 Tom Tromey <tom@tromey.com> * mips-tdep.c (mips_pdr_data): Remove. (_initialize_mips_tdep): Update.	2019-05-08 16:01:55 -06:00
Joel Brobecker	42a4f53d2b	Update copyright year range in all GDB files. ... This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.	2019-01-01 10:01:51 +04:00
Alan Hayward	cf84fa6bcf	Pass return_method to _push_dummy_call ... gdb/ChangeLog: * aarch64-tdep.c (aarch64_push_dummy_call): Replace arg with return_method. * alpha-tdep.c (alpha_push_dummy_call): Likewise. * amd64-tdep.c (amd64_push_arguments): Likewise. (amd64_push_dummy_call): Likewise. * amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise. * arc-tdep.c (arc_push_dummy_call): Likewise. * arm-tdep.c (arm_push_dummy_call): Likewise. * avr-tdep.c (avr_push_dummy_call): Likewise. * bfin-tdep.c (bfin_push_dummy_call): Likewise. * cris-tdep.c (cris_push_dummy_call): Likewise. * csky-tdep.c (csky_push_dummy_call): Likewise. * frv-tdep.c (frv_push_dummy_call): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (gdbarch_push_dummy_call): Replace arg with return_method. * h8300-tdep.c (h8300_push_dummy_call): Likewise. * hppa-tdep.c (hppa32_push_dummy_call): Likewise. (hppa64_push_dummy_call): Likewise. * i386-darwin-tdep.c (i386_darwin_push_dummy_call): Likewise. * i386-tdep.c (i386_push_dummy_call): Likewise. * ia64-tdep.c (ia64_push_dummy_call): Likewise. * infcall.c (call_function_by_hand_dummy): Likewise. * iq2000-tdep.c (iq2000_push_dummy_call): Likewise. * lm32-tdep.c (lm32_push_dummy_call): Likewise. * m32c-tdep.c (m32c_push_dummy_call): Likewise. * m32r-tdep.c (m32r_push_dummy_call): Likewise. * m68hc11-tdep.c (m68hc11_push_dummy_call): Likewise. * m68k-tdep.c (m68k_push_dummy_call): Likewise. * mep-tdep.c (mep_push_dummy_call): Likewise. * mips-tdep.c (mips_eabi_push_dummy_call): Likewise. (mips_n32n64_push_dummy_call): Likewise. (mips_o32_push_dummy_call): Likewise. (mips_o64_push_dummy_call): Likewise. * mn10300-tdep.c (mn10300_push_dummy_call): Likewise. * msp430-tdep.c (msp430_push_dummy_call): Likewise. * nds32-tdep.c (nds32_push_dummy_call): Likewise. * nios2-tdep.c (nios2_push_dummy_call): Likewise. * or1k-tdep.c (or1k_push_dummy_call): Likewise. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Likewise. (ppc64_sysv_abi_push_dummy_call): Likewise. * ppc-tdep.h (ppc_sysv_abi_push_dummy_call): Likewise. (ppc64_sysv_abi_push_dummy_call): Likewise. * riscv-tdep.c (riscv_push_dummy_call): Likewise. * rl78-tdep.c (rl78_push_dummy_call): Likewise. * rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise. * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise. * rx-tdep.c (rx_push_dummy_call): Likewise. * s390-tdep.c (s390_push_dummy_call): Likewise. * score-tdep.c (score_push_dummy_call): Likewise. * sh-tdep.c (sh_push_dummy_call_fpu): Likewise. (sh_push_dummy_call_nofpu): Likewise. * sparc-tdep.c (sparc32_store_arguments): Likewise. (sparc32_push_dummy_call): Likewise. * sparc64-tdep.c (sparc64_store_arguments): Likewise. (sparc64_push_dummy_call): Likewise. * spu-tdep.c (spu_push_dummy_call): Likewise. * tic6x-tdep.c (tic6x_push_dummy_call): Likewise. * tilegx-tdep.c (tilegx_push_dummy_call): Likewise. * v850-tdep.c (v850_push_dummy_call): Likewise. * vax-tdep.c (vax_push_dummy_call): Likewise. * xstormy16-tdep.c (xstormy16_push_dummy_call): Likewise. * xtensa-tdep.c (xtensa_push_dummy_call): Likewise.	2018-11-16 13:45:38 +00:00
Simon Marchi	f6efe3f842	Introduce gdbarch_num_cooked_regs ... The expression gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch) is used quite often to find the number of cooked registers (raw + pseudo registers). This patch introduces gdbarch_num_cooked_regs, which does the equivalent. It substantially reduces required wrapping in some places, so should improve readability. There is a for loop in m68hc11_frame_unwind_cache that had iterated until (the equivalent of) gdbarch_num_cooked_regs (gdbarch) - 1. During review, we concluded that this is most likely an off-by-one mistake, so I replaced it with gdbarch_num_cooked_regs (gdbarch). gdb/ChangeLog: * gdbarch.sh (gdbarch_num_cooked_regs): New. * gdbarch.h: Re-generate. * ax-gdb.c (gen_expr): Use gdbarch_num_cooked_regs. * dwarf2-frame.c (dwarf2_frame_cache): Likewise. * eval.c (evaluate_subexp_standard): Likewise. * findvar.c (value_of_register): Likewise. (value_of_register_lazy): Likewise. (address_from_register): Likewise. * frame.c (get_frame_register_bytes): Likewise. * gdbarch-selftests.c (register_to_value_test): Likewise. * h8300-tdep.c (h8300_register_type): Likewise. * i386-tdep.c (i386_dbx_reg_to_regnum): Likewise. (i386_svr4_reg_to_regnum): Likewise. * infcmd.c (default_print_registers_info): Likewise. (registers_info): Likewise. (print_vector_info): Likewise. (default_print_float_info): Likewise. * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. * mdebugread.c (mdebug_reg_to_regnum): Likewise. * mi/mi-main.c (mi_cmd_data_list_register_names): Likewise. (mi_cmd_data_list_changed_registers): Likewise. (mi_cmd_data_list_register_values): Likewise. (mi_cmd_data_write_register_values): Likewise. (mi_cmd_trace_frame_collected): Likewise. * mips-tdep.c (print_gp_register_row): Likewise. (mips_print_registers_info): Likewise. * nds32-tdep.c (nds32_gdbarch_init): Likewise. * regcache.c (init_regcache_descr): Likewise. (register_size): Likewise. (register_dump::dump): Likewise. (cooked_read_test): Likewise. (cooked_write_test): Likewise. * rs6000-tdep.c (rs6000_register_sim_regno): Likewise. (rs6000_gdbarch_init): Likewise. * stabsread.c (stab_reg_to_regnum): Likewise. * stack.c (info_frame_command): Likewise. * target-descriptions.c (tdesc_register_name): Likewise. * trad-frame.c (trad_frame_alloc_saved_regs): Likewise. * tui/tui-regs.c (tui_show_register_group): Likewise. * user-regs.c (user_reg_map_name_to_regnum): Likewise. (user_reg_map_regnum_to_name): Likewise. (value_of_user_reg): Likewise. (maintenance_print_user_registers): Likewise. * xtensa-tdep.c (xtensa_find_register_by_name): Likewise. (xtensa_register_name): Likewise. (xtensa_register_type): Likewise. (xtensa_reg_to_regnum): Likewise. (xtensa_pseudo_register_read): Likewise. (xtensa_pseudo_register_write): Likewise.	2018-10-21 22:29:21 -04:00
Tom Tromey	b926417afa	Simple -Wshadow=local fixes ... This fixes all the straightforward -Wshadow=local warnings in gdb. A few standard approaches are used here: * Renaming an inner (or outer, but more commonly inner) variable; * Lowering a declaration to avoid a clash; * Moving a declaration into a more inner scope to avoid a clash, including the special case of moving a declaration into a loop header. I did not consider any of the changes in this patch to be particularly noteworthy, though of course they should all still be examined. gdb/ChangeLog 2018-10-04 Tom Tromey <tom@tromey.com> * ctf.c (SET_ARRAY_FIELD): Rename "u32". * p-valprint.c (pascal_val_print): Split inner "i" variable. * xtensa-tdep.c (xtensa_push_dummy_call): Declare "i" in loop header. * xstormy16-tdep.c (xstormy16_push_dummy_call): Declare "val" in more inner scope. * xcoffread.c (read_xcoff_symtab): Rename inner "symbol". * varobj.c (varobj_update): Rename inner "newobj", "type_changed". * valprint.c (generic_emit_char): Rename inner "buf". * valops.c (find_overload_match): Rename inner "temp". (value_struct_elt_for_reference): Declare "v" in more inner scope. * v850-tdep.c (v850_push_dummy_call): Rename "len". * unittests/array-view-selftests.c (run_tests): Rename inner "vec". * tui/tui-stack.c (tui_show_frame_info): Declare "i" in loop header. * tracepoint.c (merge_uploaded_trace_state_variables): Declare "tsv" in more inner scope. (print_one_static_tracepoint_marker): Rename inner "tuple_emitter". * tic6x-tdep.c (tic6x_analyze_prologue): Declare "inst" lower. (tic6x_push_dummy_call): Don't redeclare "addr". * target-float.c: Declare "dto" lower. * symtab.c (lookup_local_symbol): Rename inner "sym". (find_pc_sect_line): Rename inner "pc". * stack.c (print_frame): Don't redeclare "gdbarch". (return_command): Rename inner "gdbarch". * s390-tdep.c (s390_prologue_frame_unwind_cache): Renam inner "sp". * rust-lang.c (rust_internal_print_type): Declare "i" in loop header. * rs6000-tdep.c (ppc_process_record): Rename inner "addr". * riscv-tdep.c (riscv_push_dummy_call): Declare "info" in inner scope. * remote.c (remote_target::update_thread_list): Don't redeclare "tp". (remote_target::process_initial_stop_replies): Rename inner "thread". (remote_target::remote_parse_stop_reply): Don't redeclare "p". (remote_target::wait_as): Don't redeclare "stop_reply". (remote_target::get_thread_local_address): Rename inner "result". (remote_target::get_tib_address): Likewise.	2018-10-04 22:51:45 -06:00
Tom Tromey	70ab8ccd4f	Use CORE_ADDR_MAX in various "breaks" arrays ... Code like this: CORE_ADDR breaks[2] = {-1, -1}; ... gives a warning with -Wnarrowing. This patch changes all instances of this to use CORE_ADDR_MAX instead. gdb/ChangeLog 2018-08-27 Tom Tromey <tom@tromey.com> * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Use CORE_ADDR_MAX. * mips-tdep.c (mips_deal_with_atomic_sequence) (micromips_deal_with_atomic_sequence): Use CORE_ADDR_MAX. * arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw) (arm_deal_with_atomic_sequence_raw): Use CORE_ADDR_MAX. * alpha-tdep.c (alpha_deal_with_atomic_sequence): Use CORE_ADDR_MAX. * aarch64-tdep.c (aarch64_software_single_step): Use CORE_ADDR_MAX.	2018-08-27 12:00:09 -06:00
Maciej W. Rozycki	6592ceed48	microMIPS: Add SYSCALL instruction decoding ... Fix a bug with commit 4cc0665f24 ("microMIPS support"), <https://sourceware.org/ml/gdb-patches/2012-05/msg00724.html>, and add missing microMIPS SYSCALL instruction decoding needed to determine the location to put a breakpoint at when single-stepping though a syscall. gdb/ * mips-tdep.c (micromips_next_pc): Add SYSCALL instruction decoding.	2018-07-18 19:17:39 +01:00
Maciej W. Rozycki	471b9d1507	GDB PR tdep/8282: MIPS: Wire in `set disassembler-options' ... Implement MIPS target support for passing options to the disassembler, complementing commit 65b48a8140 ("GDB: Add support for the new set/show disassembler-options commands."). This includes options that expect an argument, so adjust the generic code and data structures used so as to handle such options. So as to give backends syntax flexibility no specific delimiter has been defined to separate options from their respective arguments, so it has to be included as the last character of the option name. Completion code however has not been adjusted and consequently option arguments cannot be completed at this time. Also the MIPS target has non-empty defaults for the options, so that ABI names for the general-purpose registers respect our `set mips abi ...' setting rather than always being determined from the ELF headers of the binary file selected. Handle these defaults as implicit options, never shown to the user and always prepended to the user-specified options, so that the latters can override the defaults. The resulting output for the MIPS target is as follows: (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: no-aliases Use canonical instruction forms. msa Recognize MSA instructions. virt Recognize the virtualization ASE instructions. xpa Recognize the eXtended Physical Address (XPA) ASE instructions. ginv Recognize the Global INValidate (GINV) ASE instructions. gpr-names=ABI Print GPR names according to specified ABI. Default: based on binary being disassembled. fpr-names=ABI Print FPR names according to specified ABI. Default: numeric. cp0-names=ARCH Print CP0 register names according to specified architecture. Default: based on binary being disassembled. hwr-names=ARCH Print HWR names according to specified architecture. Default: based on binary being disassembled. reg-names=ABI Print GPR and FPR names according to specified ABI. reg-names=ARCH Print CP0 register and HWR names according to specified architecture. For the options above, the following values are supported for "ABI": numeric 32 n32 64 For the options above, the following values are supported for "ARCH": numeric r3000 r3900 r4000 r4010 vr4100 vr4111 vr4120 r4300 r4400 r4600 r4650 r5000 vr5400 vr5500 r5900 r6000 rm7000 rm9000 r8000 r10000 r12000 r14000 r16000 mips5 mips32 mips32r2 mips32r3 mips32r5 mips32r6 mips64 mips64r2 mips64r3 mips64r5 mips64r6 interaptiv-mr2 sb1 loongson2e loongson2f loongson3a octeon octeon+ octeon2 octeon3 xlr xlp (gdb) which corresponds to what `objdump --help' used to print for the MIPS target, with minor formatting changes, most notably option argument lists being wrapped, but also the amount of white space separating options from the respective descriptions. The relevant part the new code is now also used by `objdump --help', which means these formatting changes apply to both outputs, except for argument list wrapping, which is GDB-specific. This also adds a separating new line between the heading and option lists where descriptions are provided, hence: (gdb) set architecture s390:31-bit (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: esa Disassemble in ESA architecture mode zarch Disassemble in z/Architecture mode insnlength Print unknown instructions according to length from first two bits (gdb) but: (gdb) set architecture powerpc:common (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: 403, 405, 440, 464, 476, 601, 603, 604, 620, 7400, 7410, 7450, 7455, 750cl, 821, 850, 860, a2, altivec, any, booke, booke32, cell, com, e200z4, e300, e500, e500mc, e500mc64, e5500, e6500, e500x2, efs, efs2, power4, power5, power6, power7, power8, power9, ppc, ppc32, 32, ppc64, 64, ppc64bridge, ppcps, pwr, pwr2, pwr4, pwr5, pwr5x, pwr6, pwr7, pwr8, pwr9, pwrx, raw, spe, spe2, titan, vle, vsx (gdb) Existing affected target backends have been adjusted accordingly. This has been verified manually with: (gdb) set architecture arm (gdb) set architecture powerpc:common (gdb) set architecture s390:31-bit to cause no issues with the `show disassembler-options' and `set disassembler-options' commands. A test case for the MIPS target has also been provided, covering the default settings with ABI overrides as well as disassembler option overrides. 2018-07-02 Maciej W. Rozycki <macro@mips.com> Simon Marchi <simon.marchi@polymtl.ca> include/ PR tdep/8282 * dis-asm.h (disasm_option_arg_t): New typedef. (disasm_options_and_args_t): Likewise. (disasm_options_t): Add `arg' member, document members. (disassembler_options_mips): New prototype. (disassembler_options_arm, disassembler_options_powerpc) (disassembler_options_s390): Update prototypes. opcodes/ PR tdep/8282 * mips-dis.c (mips_option_arg_t): New enumeration. (mips_options): New variable. (disassembler_options_mips): New function. (print_mips_disassembler_options): Reimplement in terms of `disassembler_options_mips'. * arm-dis.c (disassembler_options_arm): Adapt to using the `disasm_options_and_args_t' structure. * ppc-dis.c (disassembler_options_powerpc): Likewise. * s390-dis.c (disassembler_options_s390): Likewise. gdb/ PR tdep/8282 * disasm.h (gdb_disassembler): Add `m_disassembler_options_holder'. member * disasm.c (get_all_disassembler_options): New function. (gdb_disassembler::gdb_disassembler): Use it. (gdb_buffered_insn_length_init_dis): Likewise. (gdb_buffered_insn_length): Adjust accordingly. (set_disassembler_options): Handle options with arguments. (show_disassembler_options_sfunc): Likewise. Add a leading new line if showing options with descriptions. (disassembler_options_completer): Adapt to using the `disasm_options_and_args_t' structure. * mips-tdep.c (mips_disassembler_options): New variable. (mips_disassembler_options_o32): Likewise. (mips_disassembler_options_n32): Likewise. (mips_disassembler_options_n64): Likewise. (gdb_print_insn_mips): Don't set `disassembler_options'. (gdb_print_insn_mips_n32, gdb_print_insn_mips_n64): Remove functions. (mips_gdbarch_init): Always set `gdbarch_print_insn' to `gdb_print_insn_mips'. Set `gdbarch_disassembler_options', `gdbarch_disassembler_options_implicit' and `gdbarch_valid_disassembler_options'. * arm-tdep.c (_initialize_arm_tdep): Adapt to using the `disasm_options_and_args_t' structure. * gdbarch.sh (disassembler_options_implicit): New `gdbarch' method. (valid_disassembler_options): Switch from `disasm_options_t' to the `disasm_options_and_args_t' structure. * NEWS: Document `set disassembler-options' support for the MIPS target. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. gdb/doc/ PR tdep/8282 * gdb.texinfo (Source and Machine Code): Document `set disassembler-options' support for the MIPS target. gdb/testsuite/ PR tdep/8282 * gdb.arch/mips-disassembler-options.exp: New test. * gdb.arch/mips-disassembler-options.s: New test source.	2018-07-02 23:57:21 +01:00
Simon Marchi	e4c4a59b48	Remove regcache_cooked_write_part ... Remove regcache_cooked_write_part, update callers to use regcache::cooked_write_part. gdb/ChangeLog: * regcache.h (regcache_cooked_write_part): Remove, update callers to use regcache::cooked_write_part. * regcache.c (regcache_cooked_write_part): Remove.	2018-05-30 14:54:44 -04:00
Simon Marchi	73bb000052	Remove regcache_cooked_read_part ... Remove regcache_cooked_read_part, update callers to use readable_regcache::cooked_read_part. gdb/ChangeLog: * regcache.h (regcache_cooked_read_part): Remove, update callers to use readable_regcache::cooked_read_part. * regcache.c (regcache_cooked_read_part): Remove.	2018-05-30 14:54:43 -04:00
Simon Marchi	4f0420fdab	Remove regcache_raw_write_part ... Remove regcache_raw_write_part, update callers to use regcache::raw_write_part instead. gdb/ChangeLog: * regcache.h (regcache_raw_write_part): Remove, update callers to use regcache::raw_write_part instead. * regcache.c (regcache_raw_write_part): Remove.	2018-05-30 14:54:40 -04:00
Simon Marchi	10eaee5f56	Remove regcache_raw_write ... Remove regcache_raw_write, update all callers to use regcache::raw_write instead. gdb/ChangeLog: * regcache.h (regcache_raw_write): Remove, update callers to use regcache::raw_write instead. * regcache.c (regcache_raw_write): Remove.	2018-05-30 14:54:37 -04:00
Maciej W. Rozycki	ea33cd9290	MIPS: Make `mask_address_var' static ... Make the `mask_address_var' variable static, it is not used outside mips-tdep.c and having no target name embedded within it causes a risk of a namespace clash. gdb/ * mips-tdep.c (mask_address_var): Make variable static.	2018-05-15 16:02:59 +01:00
Maciej W. Rozycki	c5196c9298	MIPS: Don't use a 32-bit BFD architecture with a 64-bit ABI ... Select `bfd_mach_mips4000', which corresponds to the MIPS III ISA, the earlies with 64-bit support, whenever a 32-bit BFD architecture has been chosen to use with a 64-bit ABI. The situation can happen in a few cases: 1. When the user has used `set architecture' or `set mips abi' commands to override automatic selection and then starts a debug session by requesting to run, attach or connect to a target. 2. In native debugging when reattaching to a previously debugged process where the program to be debugged has been since discarded, as observed with: FAIL: gdb.base/attach.exp: attach2, with no file (GDB internal error) in n32 and n64 regression testing. 3. In remote debugging with a non-XML debug stub when discarding the program to be debugged while connected to the remote target, as observed with: FAIL: gdb.base/break-unload-file.exp: cmdline: always-inserted on: break: file (GDB internal error) in n32 and n64 regression testing. In the latter two cases the ABI, quite rightfully, is retained while the program to be debugged is discarded. This is because in that case the ABI previously determined is carried over along with `gdbarch' in use, which is retained. The BFD architecture is however discarded and the default then applies, because it is not attached to `gdbarch'. In all these cases we trip with an internal error message as follows: .../gdb/mips-tdep.c:766: internal-error: bad register size A problem internal to GDB has been detected, further debugging may prove unreliable. Quit this debugging session? (y or n) n This is a bug, please report it. For instructions, see: <http://www.gnu.org/software/gdb/bugs/>. coming from `mips_pseudo_register_read', because the raw register width inferred from the BFD architecture turns out to be 4 for the general registers while the cooked register width inferred from the ABI in effect is 8. We do not hit this internal error in remote debugging with an XML debug stub, because in that case raw register width information is passed by the stub along with the XML target description. Ultimately I think we ought to make the BFD architecture sticky like the ABI, however in the interim this simple fix will do, removing the error across all three cases. The case where the user has used `set mips abi' or `set architecture' commands has to be handled anyway, and although a more sophisticated solution could be envisaged, such as reporting an error with the respective `set' command, I think this is too much of a corner case to bother. gdb/ * mips-tdep.c (mips_gdbarch_init): Don't use a 32-bit BFD architecture with a 64-bit ABI.	2018-02-26 19:43:17 +00:00
Maciej W. Rozycki	37c33887bd	MIPS: Reorder ABI determination ahead of target description loading ... Move ABI determination code ahead of target description loading so that architecture information can be adjusted according to the ABI selected, and then used in OS dependent register information initialization needed for target description processing. No functional change. gdb/ * gdb/mips-tdep.c (mips_gdbarch_init): Reorder ABI determination ahead of target description loading.	2018-02-26 19:43:17 +00:00
Yao Qi	c113ed0ca2	Pass readable_regcache to gdbarch method read_pc ... We can pass readable_regcache to gdbarch method read_pc where it is allowed to do read from regcache. gdb: 2018-02-21 Yao Qi <yao.qi@linaro.org> * avr-tdep.c (avr_read_pc): Change parameter type to readable_regcache. * gdbarch.sh (read_pc): Likewise. * gdbarch.c: Re-generated. * gdbarch.h: Re-generated. * hppa-tdep.c (hppa_read_pc): Change parameter type to readable_regcache. * ia64-tdep.c (ia64_read_pc): Likewise. * mips-tdep.c (mips_read_pc): Likewise. * spu-tdep.c (spu_read_pc): Likewise.	2018-02-21 11:20:03 +00:00
Yao Qi	849d0ba802	class readable_regcache and pass readable_regcache to gdbarch pseudo_register_read and pseudo_register_read_value ... pseudo registers are either from raw registers or memory, so gdbarch methods pseudo_register_read and pseudo_register_read_value should have regcache object which only have read methods. In other words, we should disallow writing to regcache in these two gdbarch methods. In order to apply this restriction, this patch adds a new class readable_regcache, derived from reg_buffer, and it only has raw_read and cooked_read methods. regcache is derived from readable_regcache. This patch also passes readable_regcache instead of regcache to gdbarch methods pseudo_register_read and pseudo_register_read_value. This patch moves raw_read* and cooked_read* methods to readable_regcache, which is straightforward. One thing not straightforward is that I split regcache::xfer_part to readable_regcache::read_part and regcache::write_part, because readable_regcache can only have methods to read. readable_regcache is an abstract base class, and it has a pure virtual function raw_update, because I don't want readable_regcache know where these raw registers are from. They can be from either the target (readwrite regcache) or the regcache itself (readonly regcache). gdb: 2018-02-21 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_pseudo_register_read_value): Change parameter type to 'readable_regcache *'. * amd64-tdep.c (amd64_pseudo_register_read_value): Likewise. * arm-tdep.c (arm_neon_quad_read): Likewise. (arm_pseudo_read): Likewise. * avr-tdep.c (avr_pseudo_register_read): Likewise. * bfin-tdep.c (bfin_pseudo_register_read): Likewise. * frv-tdep.c (frv_pseudo_register_read): Likewise. * gdbarch.c: Re-generated. * gdbarch.h: Re-generated. * gdbarch.sh (pseudo_register_read): Change parameter type to 'readable_regcache *'. (pseudo_register_read_value): Likewise. * h8300-tdep.c (pseudo_from_raw_register): Likewise. (h8300_pseudo_register_read): Likewise. * hppa-tdep.c (hppa_pseudo_register_read): Likewise. * i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise. (i386_pseudo_register_read_into_value): Likewise. (i386_pseudo_register_read_value): Likewise. * i386-tdep.h (i386_pseudo_register_read_into_value): Update declaration. * ia64-tdep.c (ia64_pseudo_register_read): Likewise. * m32c-tdep.c (m32c_raw_read): Likewise. (m32c_read_flg): Likewise. (m32c_banked_register): Likewise. (m32c_banked_read): Likewise. (m32c_sb_read): Likewise. (m32c_part_read): Likewise. (m32c_cat_read): Likewise. (m32c_r3r2r1r0_read): Likewise. (m32c_pseudo_register_read): Likewise. * m68hc11-tdep.c (m68hc11_pseudo_register_read): Likewise. * mep-tdep.c (mep_pseudo_cr32_read): Likewise. (mep_pseudo_cr64_read): Likewise. (mep_pseudo_register_read): Likewise. * mips-tdep.c (mips_pseudo_register_read): Likewise. * msp430-tdep.c (msp430_pseudo_register_read): Likewise. * nds32-tdep.c (nds32_pseudo_register_read): Likewise. * regcache.c (regcache::raw_read): Move it to readable_regcache. (regcache::cooked_read): Likewise. (regcache::cooked_read_value): Likewise. (regcache_cooked_read_signed): (regcache::cooked_read): Likewise. * regcache.h (readable_regcache): New class. (regcache): Inherit readable_regcache. Move some methods to readable_regcache. * rl78-tdep.c (rl78_pseudo_register_read): Change parameter type to 'readable_regcache *'. * rs6000-tdep.c (do_regcache_raw_read): Remove. (e500_pseudo_register_read): Change parameter type to 'readable_regcache *'. (dfp_pseudo_register_read): Likewise. (vsx_pseudo_register_read): Likewise. (efpr_pseudo_register_read): Likewise. * s390-tdep.c (s390_pseudo_register_read): Likewise. * sh-tdep.c (sh_pseudo_register_read): Likewise. * sh64-tdep.c (pseudo_register_read_portions): Likewise. (sh64_pseudo_register_read): Likewise. * sparc-tdep.c (sparc32_pseudo_register_read): Likewise. * sparc64-tdep.c (sparc64_pseudo_register_read): Likewise. * spu-tdep.c (spu_pseudo_register_read_spu): Likewise. (spu_pseudo_register_read): Likewise. * xtensa-tdep.c (xtensa_register_read_masked): Likewise. (xtensa_pseudo_register_read): Likewise.	2018-02-21 11:20:03 +00:00
Yao Qi	03f50fc878	Replace regcache_raw_read with regcache->raw_read ... The patch later in this series will move regcache's raw_read and cooked_read methods to a new class regcache_read, and regcache is dervied from it. Also pass regcache_read instead of regcache to gdbarch methods pseudo_register_read and pseudo_register_read_value. In order to prepare for this change, this patch changes regcache_raw_read to regcache->raw_read. On the other hand, since we are in C++, I prefer using class method (regcache->raw_read). gdb: 2018-01-22 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_pseudo_read_value): Call regcache method raw_read instead of regcache_raw_read. * amd64-tdep.c (amd64_pseudo_register_read_value): Likewise. * arm-tdep.c (arm_neon_quad_read): Likewise. * avr-tdep.c (avr_pseudo_register_read): Likewise. * bfin-tdep.c (bfin_pseudo_register_read): Likewise. * frv-tdep.c (frv_pseudo_register_read): Likewise. * h8300-tdep.c (h8300_pseudo_register_read): Likewise. * i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise. (i386_pseudo_register_read_into_value): Likewise. * mep-tdep.c (mep_pseudo_cr32_read): Likewise. * msp430-tdep.c (msp430_pseudo_register_read): Likewise. * nds32-tdep.c (nds32_pseudo_register_read): Likewise. * rl78-tdep.c (rl78_pseudo_register_read): Likewise. * s390-linux-tdep.c (s390_pseudo_register_read): Likewise. * sparc-tdep.c (sparc32_pseudo_register_read): Likewise. * sparc64-tdep.c (sparc64_pseudo_register_read): Likewise. * spu-tdep.c (spu_pseudo_register_read_spu): Likewise. * xtensa-tdep.c (xtensa_pseudo_register_read): Likewise.	2018-01-22 11:02:49 +00:00
Joel Brobecker	e2882c8578	Update copyright year range in all GDB files ... gdb/ChangeLog: Update copyright year range in all GDB files	2018-01-02 07:38:06 +04:00
Simon Marchi	798a7429f9	Remove some unused variables ... This patch removes some unused variables, found with -Wunused. I have not removed everything reported by -Wunused, because some expressions such as struct type *arg_type = check_typedef (value_type); in bfin-tdep.c could have an unexpected but important side-effect. I removed others that I considered more low-risk, such as: struct gdbarch *gdbarch = get_objfile_arch (objfile); I tested building with Python 2/Python 3/no Python, with/without expat, with/without libipt and with/without babeltrace. gdb/ChangeLog: * ada-lang.c (ada_collect_symbol_completion_matches): Remove unused variables. (ada_is_redundant_range_encoding): Likewise. * ada-varobj.c (ada_varobj_get_value_of_array_variable): Likewise. * alpha-tdep.c (alpha_software_single_step): Likewise. * arm-tdep.c (_initialize_arm_tdep): Likewise. * auto-load.c (info_auto_load_cmd): Likewise. * break-catch-syscall.c (insert_catch_syscall): Likewise. (remove_catch_syscall): Likewise. * breakpoint.c (condition_completer): Likewise. (clear_command): Likewise. (update_breakpoint_locations): Likewise. * btrace.c (btrace_disable): Likewise. (btrace_teardown): Likewise. (btrace_maint_update_pt_packets): Likewise. (maint_btrace_clear_cmd): Likewise. * cli/cli-decode.c (lookup_cmd_1): Likewise. (lookup_cmd_composition): Likewise. * cli/cli-dump.c (scan_filename): Likewise. (restore_command): Likewise. * compile/compile-loc2c.c (compute_stack_depth): Likewise. * compile/compile-object-load.c (compile_object_load): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * compile/compile.c (compile_to_object): Likewise. * completer.c (filename_completer): Likewise. (complete_files_symbols): Likewise. (complete_expression): Likewise. * corelow.c (core_open): Likewise. * ctf.c (ctf_start): Likewise. (ctf_write_status): Likewise. (ctf_write_uploaded_tsv): Likewise. (ctf_write_definition_end): Likewise. (ctf_open_dir): Likewise. (ctf_xfer_partial): Likewise. (ctf_trace_find): Likewise. * disasm.c (gdb_pretty_print_disassembler::pretty_print_insn): Likewise. * dwarf2loc.c (allocate_piece_closure): Likewise. (indirect_pieced_value): Likewise. (dwarf2_evaluate_loc_desc_full): Likewise. * dwarf2read.c (dw2_expand_marked_cus): Likewise. (dw2_expand_symtabs_matching): Likewise. (dw2_map_symbol_filenames): Likewise. (read_and_check_comp_unit_head): Likewise. (read_cutu_die_from_dwo): Likewise. (lookup_dwo_unit): Likewise. (read_comp_units_from_section): Likewise. (dwarf2_compute_name): Likewise. (handle_DW_AT_stmt_list): Likewise. (create_cus_hash_table): Likewise. (create_dwp_v2_section): Likewise. (dwarf2_rnglists_process): Likewise. (dwarf2_ranges_process): Likewise. (dwarf2_record_block_ranges): Likewise. (is_vtable_name): Likewise. (read_formatted_entries): Likewise. (skip_form_bytes): Likewise. * elfread.c (elf_symtab_read): Likewise. * exec.c (exec_file_command): Likewise. * f-valprint.c (f_val_print): Likewise. (info_common_command_for_block): Likewise. * guile/guile.c (initialize_scheme_side): Likewise. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise. * guile/scm-cmd.c (cmdscm_completer): Likewise. (gdbscm_register_command_x): Likewise. * guile/scm-frame.c (gdbscm_frame_read_var): Likewise. * guile/scm-param.c (gdbscm_parameter_value): Likewise. * guile/scm-ports.c (file_port_magic): Likewise. * guile/scm-pretty-print.c (ppscm_search_pp_list): Likewise. (ppscm_pretty_print_one_value): Likewise. (ppscm_print_children): Likewise. * guile/scm-string.c (gdbscm_string_to_argv): Likewise. * guile/scm-symtab.c (gdbscm_sal_symtab): Likewise. * guile/scm-type.c (gdbscm_type_next_field_x): Likewise. * guile/scm-utils.c (gdbscm_parse_function_args): Likewise. * i386-tdep.c (i386_register_reggroup_p): Likewise. * infcmd.c (run_command_1): Likewise. (until_next_fsm_clean_up): Likewise. * linespec.c (linespec_complete): Likewise. (find_label_symbols): Likewise. * m2-valprint.c (m2_val_print): Likewise. * memattr.c (require_user_regions): Likewise. (lookup_mem_region): Likewise. (disable_mem_command): Likewise. (mem_delete): Likewise. * mep-tdep.c (mep_register_name): Likewise. (mep_analyze_prologue): Likewise. * mi/mi-cmd-file.c (mi_cmd_file_list_shared_libraries): Likewise. * mi/mi-interp.c (mi_on_sync_execution_done): Likewise. * mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise. * microblaze-linux-tdep.c (microblaze_linux_init_abi): Likewise. * minidebug.c (lzma_open): Likewise. * minsyms.c (lookup_minimal_symbol): Likewise. * mips-linux-tdep.c (mips64_fill_fpregset): Likewise. * mips-tdep.c (mips_stub_frame_sniffer): Likewise. (mips_o64_return_value): Likewise. (mips_single_step_through_delay): Likewise. (_initialize_mips_tdep): Likewise. * nios2-tdep.c (nios2_push_dummy_call): Likewise. (nios2_software_single_step): Likewise. * parse.c (find_minsym_type_and_address): Likewise. * psymtab.c (psym_relocate): Likewise. * python/py-breakpoint.c (bppy_get_commands): Likewise. (gdbpy_breakpoint_modified): Likewise. * python/py-infevents.c (create_inferior_call_event_object): Likewise. * python/py-record-btrace.c (btpy_list_item): Likewise. * python/py-type.c (typy_str): Likewise. * python/py-value.c (valpy_call): Likewise. * python/python.c (do_start_initialization): Likewise. * record-btrace.c (record_btrace_insn_history_range): Likewise. (record_btrace_call_history_range): Likewise. (record_btrace_record_method): Likewise. (record_btrace_xfer_partial): Likewise. (btrace_get_frame_function): Likewise. * record-full.c (record_full_open): Likewise. * record.c (get_context_size): Likewise. * registry.h (DEFINE_REGISTRY): Likewise. * remote-fileio.c (remote_fileio_request): Likewise. * remote.c (remote_update_thread_list): Likewise. (remote_check_symbols): Likewise. (remote_commit_resume): Likewise. (remote_interrupt): Likewise. (remote_insert_breakpoint): Likewise. (compare_sections_command): Likewise. * rust-exp.y (super_name): Likewise. (lex_string): Likewise. (convert_ast_to_type): Likewise. (convert_ast_to_expression): Likewise. * rust-lang.c (rust_print_struct_def): Likewise. (rust_print_type): Likewise. (rust_evaluate_subexp): Likewise. * rx-tdep.c (rx_register_type): Likewise. * ser-event.c (serial_event_clear): Likewise. * serial.c (serial_open): Likewise. * spu-tdep.c (spu_overlay_new_objfile): Likewise. * symfile.c (section_is_overlay): Likewise. (overlay_unmapped_address): Likewise. (overlay_mapped_address): Likewise. (simple_overlay_update_1): Likewise. (simple_overlay_update): Likewise. * symtab.c (symbol_find_demangled_name): Likewise. (search_symbols): Likewise. * target-descriptions.c (tdesc_predefined_type): Likewise. * target.c (target_commit_resume): Likewise. * thread.c (print_selected_thread_frame): Likewise. * top.c (new_ui_command): Likewise. (gdb_readline_no_editing): Likewise. * tracefile-tfile.c (tfile_open): Likewise. * tracepoint.c (create_tsv_from_upload): Likewise. * utils.c (quit): Likewise. (defaulted_query): Likewise. * valarith.c (value_concat): Likewise. * xml-syscall.c (xml_list_syscalls_by_group): Likewise. * xml-tdesc.c (target_fetch_description_xml): Likewise. * xtensa-tdep.c (xtensa_pseudo_register_read): Likewise. (xtensa_pseudo_register_write): Likewise. gdb/gdbserver/ChangeLog: * regcache.c (registers_to_string): Remove unused variable.	2017-12-05 16:05:50 -05:00
Tom Tromey	eb4c3f4aaa	Constify add_setshow_* ... This constifies the add_setshow_* family of functions, and then fixes up the fallout. The bulk of this patch was written by script. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * ada-lang.c (catch_ada_exception_command): Constify. (catch_assert_command): Constify. * break-catch-throw.c (catch_catch_command, catch_throw_command) (catch_rethrow_command): Constify. (catch_exception_command_1): Constify. * breakpoint.h (add_catch_command): Constify. * break-catch-syscall.c (catch_syscall_command_1): Constify. (catch_syscall_split_args): Constify. * break-catch-sig.c (catch_signal_command): Constify. (catch_signal_split_args): Constify. * cli/cli-decode.h (struct cmd_list_element) <function>: Use cmd_const_sfunc_ftype. * cli/cli-decode.c (add_setshow_cmd_full): Constify. (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, struct cmd_list_element) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd): Constify. (set_cmd_sfunc): Constify. (empty_sfunc): Constify. * command.h (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd): Constify. (set_cmd_sfunc): Constify. (cmd_sfunc_ftype): Remove. * compile/compile.c (set_compile_args): Constify. * infrun.c (set_disable_randomization): Constify. * infcmd.c (set_args_command, set_cwd_command): Constify. * breakpoint.c (set_condition_evaluation_mode): Constify. (add_catch_command): Constify. (catch_fork_command_1, catch_exec_command_1) (catch_load_command_1, catch_unload_command_1): Constify. (catch_load_or_unload): Constify. * guile/scm-param.c (pascm_set_func): Constify. (add_setshow_generic): Constify. * python/py-param.c (get_set_value): Constify. * top.h (set_verbose): Constify. * tui/tui-win.c (tui_set_var_cmd): Constify. * mi/mi-main.c (set_mi_async_command): Constify. * cli/cli-logging.c (set_logging_overwrite) (set_logging_redirect): Constify. * value.c (set_max_value_size): Constify. * valprint.c (set_input_radix, set_output_radix): Constify. * utils.c (set_width_command, set_height_command): Constify. * typeprint.c (set_print_type_methods, set_print_type_typedefs): Constify. * tracepoint.c (set_disconnected_tracing) (set_circular_trace_buffer, set_trace_buffer_size) (set_trace_user, set_trace_notes, set_trace_stop_notes): Constify. * top.c (set_history_size_command, set_verbose, set_editing) (set_gdb_datadir, set_history_filename): Constify. * target.c (set_targetdebug, maint_set_target_async_command) (maint_set_target_non_stop_command, set_target_permissions) (set_write_memory_permission): Constify. (open_target): Constify. * target-descriptions.c (set_tdesc_filename_cmd): Constify. * target-dcache.c (set_stack_cache, set_code_cache): Constify. * symtab.c (set_symbol_cache_size_handler): Constify. * symfile.c (set_ext_lang_command): Constify. * symfile-debug.c (set_debug_symfile): Constify. * source.c (set_directories_command): Constify. * solib.c (reload_shared_libraries, gdb_sysroot_changed): Constify. * serial.c (set_parity): Constify. * rs6000-tdep.c (powerpc_set_soft_float, powerpc_set_vector_abi): Constify. * remote.c (set_remote_exec_file, set_remotebreak) (set_remote_protocol_Z_packet_cmd, set_range_stepping): Constify. * record.c (set_record_insn_history_size) (set_record_call_history_size): Constify. * record-full.c (set_record_full_insn_max_num): Constify. * proc-api.c (set_procfs_trace_cmd, set_procfs_file_cmd): Constify. * osabi.c (set_osabi): Constify. * mips-tdep.c (set_mips64_transfers_32bit_regs) (reinit_frame_cache_sfunc, mips_abi_update): Constify. * maint.c (maintenance_set_profile_cmd): Constify. * linux-thread-db.c (set_libthread_db_search_path): Constify. * language.c (set_language_command, set_range_command) (set_case_command): Constify. * infrun.c (set_non_stop, set_observer_mode) (set_stop_on_solib_events, set_schedlock_func) (set_exec_direction_func): Constify. * infcmd.c (set_inferior_tty_command): Constify. * disasm.c (set_disassembler_options_sfunc): Constify. * demangle.c (set_demangling_command): Constify. * dcache.c (set_dcache_size, set_dcache_line_size): Constify. * cris-tdep.c (set_cris_version, set_cris_mode) (set_cris_dwarf2_cfi): Constify. * corefile.c (set_gnutarget_command): Constify. * charset.c (set_host_charset_sfunc, set_target_charset_sfunc) (set_target_wide_charset_sfunc): Constify. * breakpoint.c (update_dprintf_commands): Constify. * auto-load.c (set_auto_load_dir, set_auto_load_safe_path): Constify. * arm-tdep.c (set_fp_model_sfunc, arm_set_abi) (set_disassembly_style_sfunc): Constify. * arch-utils.c (set_endian, set_architecture): Constify. * alpha-tdep.c (reinit_frame_cache_sfunc): Constify. * agent.c (set_can_use_agent): Constify.	2017-11-07 13:59:09 -07:00
Ulrich Weigand	f69fdf9bca	Target FP: Add string routines to target-float.{c,h} ... This adds target_float_to_string and target_float_from_string, which dispatch to the corresponding floatformat_ or decimal_ routines. Existing users of those routines are changed to use the new target-float routines instead (most of those places already handle both binary and decimal FP). In addition, two other places are changes to use target_float_from_string: - define_symbol in stabsread.c, when parsing a floating-point literal from stabs debug info - gdbarch-selftest.c when initializing a target format values (to eliminate use of DOUBLEST there). gdb/ChangeLog: 2017-11-06 Ulrich Weigand <uweigand@de.ibm.com> * target-float.c (target_float_to_string): New function. (target_float_from_string): New function. * target-float.h (target_float_to_string): Add prototype. (target_float_from_string): Add prototype. * valprint.c: Include "target-float.h". Do not include "doublest.h" and "dfp.h". (print_floating): Use target_float_to_string. * printcmd.c: Include "target-float.h". Do not include "dfp.h". (printf_floating): Use target_float_to_string. * i387-tdep.c: Include "target-float.h". Do not include "doublest.h". (print_i387_value): Use target_float_to_string. * mips-tdep.c: Include "target-float.h". (mips_print_fp_register): Use target_float_to_string. * sh64-tdep.c: Include "target-float.h". (sh64_do_fp_register): Use target_float_to_string. * parse.c: Include "target-float.h". Do not include "doublest.h" and "dfp.h". (parse_float): Use target_float_from_string. * stabsread.c: Include "target-float.h". Do not include "doublest.h". (define_symbol): Use target_float_from_string. * gdbarch-selftests.c: Include "target-float.h". (register_to_value_test): Use target_float_from_string.	2017-11-06 15:56:35 +01:00
Yao Qi	8b86c95921	const-fy regcache::m_aspace ... regcache::m_aspace is a const, never changed during the lifetime of regcache object. The address_space object is a const object too. gdb: 2017-11-02 Yao Qi <yao.qi@linaro.org> * breakpoint.c (insert_single_step_breakpoints): Update. * frame.c (struct frame_info) <aspace>: Add const. (frame_save_as_regcache): Add const. (get_frame_address_space): Return const address_space *. * frame.h (get_frame_address_space): Update declaration. * infrun.c (struct step_over_info) <aspace>: Add const. (set_step_over_info): Make aspace const. (displaced_step_prepare_throw): Change variable const. (resume): Likewise. (proceed): Likewise. (adjust_pc_after_break): Likewise. (save_waitstatus): Likewise. (handle_signal_stop): Likewise. (keep_going_pass_signal): Likewise. * jit.c (jit_frame_sniffer): Add const. * mips-tdep.c (mips_single_step_through_delay): Likewise. * ppc-linux-tdep.c (ppu2spu_sniffer): Likewise. * record-full.c (record_full_wait_1): Likewise. * regcache.c (regcache::regcache): Change parameter to const. * regcache.h (regcache::regcache): Likewise. (regcache::aspace): Return const address_space *. (regcache) <m_aspace>: Add const.	2017-11-02 15:15:42 +00:00
Yao Qi	ac7936dfd0	s/get_regcache_arch (regcache)/regcache->arch ()/g ... This patches removes get_regcache_arch, and use regache->arch () instead. The motivation of this change is that I am going to move some basic stuff into a base class of regcache. I don't need to update "client" code regcache->arch (). On the other hand, this patch shortens the code a little bit. gdb: 2017-10-25 Yao Qi <yao.qi@linaro.org> * aarch32-linux-nat.c (aarch32_gp_regcache_supply): Use regcache->arch () instead get_regcache_arch. * aarch64-fbsd-nat.c (aarch64_fbsd_fetch_inferior_registers): Likewise. (aarch64_fbsd_store_inferior_registers): Likewise. * aarch64-linux-nat.c (fetch_gregs_from_thread): Likewise. (store_gregs_to_thread): Likewise. (fetch_fpregs_from_thread): Likewise. (store_fpregs_to_thread): Likewise. * aarch64-tdep.c (aarch64_extract_return_value): Likewise. (aarch64_store_return_value): Likewise. (aarch64_software_single_step): Likewise. * aix-thread.c (aix_thread_wait): Likewise. (supply_reg32): Likewise. (supply_sprs64): Likewise. (supply_sprs32): Likewise. (fill_gprs64): Likewise. (fill_gprs32): Likewise. (fill_sprs64): Likewise. (fill_sprs32): Likewise. (store_regs_user_thread): Likewise. (store_regs_kernel_thread): Likewise. * alpha-bsd-nat.c (alphabsd_fetch_inferior_registers): Likewise. (alphabsd_store_inferior_registers): Likewise. * alpha-tdep.c (alpha_extract_return_value): Likewise. (alpha_store_return_value): Likewise. (alpha_deal_with_atomic_sequence): Likewise. (alpha_next_pc): Likewise. (alpha_software_single_step): Likewise. * amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers): Likewise. (amd64bsd_store_inferior_registers): Likewise. * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers): Likewise. (amd64_linux_store_inferior_registers): Likewise. * amd64-nat.c (amd64_supply_native_gregset): Likewise. (amd64_collect_native_gregset): Likewise. * amd64-obsd-tdep.c (amd64obsd_supply_uthread): Likewise. (amd64obsd_collect_uthread): Likewise. * amd64-tdep.c (amd64_supply_fpregset): Likewise. (amd64_collect_fpregset): Likewise. (amd64_supply_fxsave): Likewise. (amd64_supply_xsave): Likewise. (amd64_collect_fxsave): Likewise. (amd64_collect_xsave): Likewise. * arc-tdep.c (arc_write_pc): Likewise. * arch-utils.c (default_skip_permanent_breakpoint): Likewise. * arm-fbsd-nat.c (arm_fbsd_fetch_inferior_registers): Likewise. (arm_fbsd_store_inferior_registers): Likewise. * arm-linux-nat.c (fetch_vfp_regs): Likewise. (store_vfp_regs): Likewise. (arm_linux_fetch_inferior_registers): Likewise. (arm_linux_store_inferior_registers): Likewise. * arm-linux-tdep.c (arm_linux_supply_gregset): Likewise. (arm_linux_sigreturn_next_pc): Likewise. (arm_linux_get_next_pcs_syscall_next_pc): Likewise. * arm-nbsd-nat.c (arm_supply_gregset): Likewise. (fetch_register): Likewise. (store_register): Likewise. * arm-tdep.c (arm_is_thumb): Likewise. (displaced_in_arm_mode): Likewise. (bx_write_pc): Likewise. (arm_get_next_pcs_addr_bits_remove): Likewise. (arm_software_single_step): Likewise. (arm_extract_return_value): Likewise. (arm_store_return_value): Likewise. (arm_write_pc): Likewise. * bfin-tdep.c (bfin_extract_return_value): Likewise. * bsd-uthread.c (bsd_uthread_fetch_registers): Likewise. (bsd_uthread_store_registers): Likewise. * core-regset.c (fetch_core_registers): Likewise. * corelow.c (get_core_registers): Likewise. * cris-tdep.c (cris_store_return_value): Likewise. (cris_extract_return_value): Likewise. (find_step_target): Likewise. (find_step_target): Likewise. (cris_software_single_step): Likewise. * ctf.c (ctf_fetch_registers): Likewise. * darwin-nat.c (cancel_breakpoint): Likewise. * fbsd-tdep.c (fbsd_collect_thread_registers): Likewise. * frv-tdep.c (frv_extract_return_value): Likewise. * ft32-tdep.c (ft32_store_return_value): Likewise. (ft32_extract_return_value): Likewise. * go32-nat.c (fetch_register): Likewise. (go32_fetch_registers): Likewise. (go32_store_registers): Likewise. (store_register): Likewise. * h8300-tdep.c (h8300_extract_return_value): Likewise. (h8300_store_return_value): Likewise. * hppa-linux-nat.c (fetch_register): Likewise. (store_register): Likewise. (hppa_linux_fetch_inferior_registers): Likewise. (hppa_linux_store_inferior_registers): Likewise. * i386-darwin-nat.c (i386_darwin_fetch_inferior_registers): Likewise. (i386_darwin_store_inferior_registers): Likewise. * i386-gnu-nat.c (gnu_fetch_registers): Likewise. (gnu_store_registers): Likewise. * i386-linux-nat.c (fetch_register): Likewise. (store_register): Likewise. (supply_gregset): Likewise. (fill_gregset): Likewise. (i386_linux_fetch_inferior_registers): Likewise. (i386_linux_store_inferior_registers): Likewise. (i386_linux_resume): Likewise. * i386-linux-tdep.c (i386_linux_get_syscall_number_from_regcache): Likewise. * i386-nto-tdep.c (i386nto_supply_gregset): Likewise. * i386-obsd-nat.c (i386obsd_supply_pcb): Likewise. * i386-obsd-tdep.c (i386obsd_supply_uthread): Likewise. (i386obsd_collect_uthread): Likewise. * i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise. (i386_supply_gregset): Likewise. (i386_collect_gregset): Likewise. (i386_supply_fpregset): Likewise. (i386_collect_fpregset): Likewise. (i386_mpx_bd_base): Likewise. * i386-v4-nat.c (supply_fpregset): Likewise. (fill_fpregset): Likewise. * i387-tdep.c (i387_supply_fsave): Likewise. (i387_collect_fsave): Likewise. (i387_supply_fxsave): Likewise. (i387_collect_fxsave): Likewise. (i387_supply_xsave): Likewise. (i387_collect_xsave): Likewise. * ia64-linux-nat.c (ia64_linux_fetch_registers): Likewise. (ia64_linux_store_registers): Likewise. * ia64-tdep.c (ia64_access_rse_reg): Likewise. (ia64_extract_return_value): Likewise. (ia64_store_return_value): Likewise. (find_func_descr): Likewise. * inf-child.c (inf_child_fetch_inferior_registers): Likewise. * inf-ptrace.c (inf_ptrace_fetch_registers): Likewise. (inf_ptrace_store_registers): Likewise. * infrun.c (use_displaced_stepping): Likewise. (displaced_step_prepare_throw): Likewise. (resume): Likewise. (proceed): Likewise. (do_target_wait): Likewise. (adjust_pc_after_break): Likewise. (handle_inferior_event_1): Likewise. (handle_signal_stop): Likewise. (save_infcall_suspend_state): Likewise. (restore_infcall_suspend_state): Likewise. * iq2000-tdep.c (iq2000_extract_return_value): Likewise. * jit.c (jit_frame_prev_register): Likewise. * linux-nat.c (save_stop_reason): Likewise. (linux_nat_wait_1): Likewise. (resume_stopped_resumed_lwps): Likewise. * linux-record.c (record_linux_sockaddr): Likewise. (record_linux_msghdr): Likewise. (record_linux_system_call): Likewise. * linux-tdep.c (linux_collect_thread_registers): Likewise. * lm32-tdep.c (lm32_extract_return_value): Likewise. (lm32_store_return_value): Likewise. * m32c-tdep.c (m32c_read_flg): Likewise. (m32c_pseudo_register_read): Likewise. (m32c_pseudo_register_write): Likewise. * m32r-linux-tdep.c (m32r_linux_supply_gregset): Likewise. (m32r_linux_collect_gregset): Likewise. * m32r-tdep.c (m32r_store_return_value): Likewise. (m32r_extract_return_value): Likewise. * m68k-bsd-nat.c (m68kbsd_supply_fpregset): Likewise. (m68kbsd_collect_fpregset): Likewise. * m68k-bsd-tdep.c (m68kbsd_supply_fpregset): Likewise. * m68k-linux-nat.c (fetch_register): Likewise. (old_fetch_inferior_registers): Likewise. (old_store_inferior_registers): Likewise. (store_regs): Likewise. * m68k-tdep.c (m68k_svr4_extract_return_value): Likewise. (m68k_svr4_store_return_value): Likewise. * m88k-tdep.c (m88k_store_arguments): Likewise. * mi/mi-main.c (mi_cmd_data_list_changed_registers): Likewise. (mi_cmd_data_write_register_values): Likewise. * mips-fbsd-nat.c (mips_fbsd_fetch_inferior_registers): Likewise. (mips_fbsd_store_inferior_registers): Likewise. * mips-fbsd-tdep.c (mips_fbsd_supply_fpregs): Likewise. (mips_fbsd_supply_gregs): Likewise. (mips_fbsd_collect_fpregs): Likewise. (mips_fbsd_collect_gregs): Likewise. (mips_fbsd_supply_fpregset): Likewise. (mips_fbsd_collect_fpregset): Likewise. (mips_fbsd_supply_gregset): Likewise. (mips_fbsd_collect_gregset): Likewise. * mips-linux-nat.c (supply_gregset): Likewise. (fill_gregset): Likewise. (supply_fpregset): Likewise. (fill_fpregset): Likewise. * mips-linux-tdep.c (mips_supply_gregset): Likewise. (mips_fill_gregset): Likewise. (mips_supply_fpregset): Likewise. (mips_fill_fpregset): Likewise. (mips64_supply_gregset): Likewise. (micromips_linux_sigframe_validate): Likewise. * mips-nbsd-nat.c (mipsnbsd_fetch_inferior_registers): Likewise. (mipsnbsd_fetch_inferior_registers): Likewise. (mipsnbsd_store_inferior_registers): Likewise. * mips-nbsd-tdep.c (mipsnbsd_supply_fpregset): Likewise. (mipsnbsd_supply_gregset): Likewise. (mipsnbsd_iterate_over_regset_sections): Likewise. (mipsnbsd_supply_reg): Likewise. (mipsnbsd_supply_fpreg): Likewise. * mips-tdep.c (mips_in_frame_stub): Likewise. (mips_dummy_id): Likewise. (is_octeon_bbit_op): Likewise. (micromips_bc1_pc): Likewise. (extended_mips16_next_pc): Likewise. (mips16_next_pc): Likewise. (deal_with_atomic_sequence): Likewise. * moxie-tdep.c (moxie_process_readu): Likewise. * nios2-tdep.c (nios2_get_next_pc): Likewise. * nto-procfs.c (procfs_store_registers): Likewise. * ppc-fbsd-nat.c (ppcfbsd_fetch_inferior_registers): Likewise. (ppcfbsd_store_inferior_registers): Likewise. * ppc-linux-nat.c (fetch_vsx_register): Likewise. (fetch_altivec_register): Likewise. (get_spe_registers): Likewise. (fetch_spe_register): Likewise. (fetch_altivec_registers): Likewise. (fetch_all_gp_regs): Likewise. (fetch_all_fp_regs): Likewise. (store_vsx_register): Likewise. (store_altivec_register): Likewise. (set_spe_registers): Likewise. (store_spe_register): Likewise. (store_altivec_registers): Likewise. (store_all_gp_regs): Likewise. (store_all_fp_regs): Likewise. * ppc-linux-tdep.c (ppc_linux_supply_gregset): Likewise. (ppc_linux_collect_gregset): Likewise. (ppc_canonicalize_syscall): Likewise. (ppc_linux_record_signal): Likewise. (ppu2spu_prev_register): Likewise. * ppc-nbsd-nat.c (ppcnbsd_supply_pcb): Likewise. * ppc-obsd-nat.c (ppcobsd_fetch_registers): Likewise. (ppcobsd_store_registers): Likewise. * ppc-ravenscar-thread.c (ppc_ravenscar_generic_fetch_registers): Likewise. (ppc_ravenscar_generic_store_registers): Likewise. * procfs.c (procfs_fetch_registers): Likewise. (procfs_store_registers): Likewise. * ravenscar-thread.c (ravenscar_fetch_registers): Likewise. (ravenscar_store_registers): Likewise. (ravenscar_prepare_to_store): Likewise. * record-btrace.c (record_btrace_fetch_registers): Likewise. * record-full.c (record_full_wait_1): Likewise. (record_full_registers_change): Likewise. (record_full_store_registers): Likewise. (record_full_core_fetch_registers): Likewise. (record_full_save): Likewise. (record_full_goto_insn): Likewise. * regcache.c (regcache_register_size): Likewise. (get_regcache_arch): Remove. (regcache_read_pc): Likewise. * regcache.h (get_regcache_arch): Remove. * remote-sim.c (gdbsim_fetch_register): Likewise. (gdbsim_store_register): Likewise. * remote.c (fetch_register_using_p): Likewise. (send_g_packet): Likewise. (remote_prepare_to_store): Likewise. (store_registers_using_G): Likewise. * reverse.c (save_bookmark_command): Likewise. (goto_bookmark_command): Likewise. * rs6000-aix-tdep.c (branch_dest): Likewise. * rs6000-nat.c (rs6000_ptrace64): Likewise. (fetch_register): Likewise. * rs6000-tdep.c (ppc_supply_reg): Likewise. (ppc_collect_reg): Likewise. (ppc_collect_gregset): Likewise. (ppc_collect_fpregset): Likewise. (ppc_collect_vsxregset): Likewise. (ppc_collect_vrregset): Likewise. (ppc_displaced_step_hw_singlestep): Likewise. (rs6000_pseudo_register_read): Likewise. (rs6000_pseudo_register_write): Likewise. * s390-linux-nat.c (supply_gregset): Likewise. (fill_gregset): Likewise. (s390_linux_fetch_inferior_registers): Likewise. * s390-linux-tdep.c (s390_write_pc): Likewise. (s390_software_single_step): Likewise. (s390_all_but_pc_registers_record): Likewise. (s390_linux_syscall_record): Likewise. * sentinel-frame.c (sentinel_frame_prev_arch): Likewise. * sh-nbsd-nat.c (shnbsd_fetch_inferior_registers): Likewise. (shnbsd_store_inferior_registers): Likewise. * sh-tdep.c (sh_extract_return_value_nofpu): Likewise. (sh_extract_return_value_fpu): Likewise. (sh_store_return_value_nofpu): Likewise. (sh_corefile_supply_regset): Likewise. (sh_corefile_collect_regset): Likewise. * sh64-tdep.c (sh64_extract_return_value): Likewise. (sh64_store_return_value): Likewise. * sparc-linux-tdep.c (sparc32_linux_collect_core_fpregset): Likewise. * sparc-nat.c (sparc_fetch_inferior_registers): Likewise. (sparc_store_inferior_registers): Likewise. * sparc-ravenscar-thread.c (register_in_thread_descriptor_p): Likewise. (sparc_ravenscar_prepare_to_store): Likewise. * sparc-tdep.c (sparc32_store_arguments): Likewise. (sparc_analyze_control_transfer): Likewise. (sparc_step_trap): Likewise. (sparc_software_single_step): Likewise. (sparc32_gdbarch_init): Likewise. (sparc_supply_rwindow): Likewise. (sparc_collect_rwindow): Likewise. * sparc64-linux-tdep.c (sparc64_linux_collect_core_fpregset): Likewise. * sparc64-nbsd-nat.c (sparc64nbsd_supply_gregset): Likewise. (sparc64nbsd_collect_gregset): Likewise. (sparc64nbsd_supply_fpregset): Likewise. (sparc64nbsd_collect_fpregset): Likewise. * sparc64-tdep.c (sparc64_store_arguments): Likewise. (sparc64_supply_gregset): Likewise. (sparc64_collect_gregset): Likewise. (sparc64_supply_fpregset): Likewise. (sparc64_collect_fpregset): Likewise. * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise. * spu-tdep.c (spu_unwind_sp): Likewise. (spu2ppu_prev_register): Likewise. (spu_memory_remove_breakpoint): Likewise. * stack.c (return_command): Likewise. * tic6x-tdep.c (tic6x_extract_signed_field): Likewise. * tracefile-tfile.c (tfile_fetch_registers): Likewise. * tracefile.c (trace_save_ctf): Likewise. * windows-nat.c (do_windows_fetch_inferior_registers): Likewise. (do_windows_store_inferior_registers): Likewise. (windows_resume): Likewise. * xtensa-linux-nat.c (fill_gregset): Likewise. (supply_gregset_reg): Likewise. * xtensa-tdep.c (xtensa_register_write_masked): Likewise. (xtensa_register_read_masked): Likewise. (xtensa_supply_gregset): Likewise. (xtensa_extract_return_value): Likewise. (xtensa_store_return_value): Likewise.	2017-10-25 16:37:03 +01:00
Ulrich Weigand	8ba0dd515c	Target FP printing: Use floatformat_to_string in tdep code ... A few tdep files use target-specific printing routines to output values in the floating-point registers. To get rid of host floating-point code, this patch changes them to use floatformat_to_string instead. No functional change intended, the resulting output should look the same. ChangeLog: 2017-10-24 Ulrich Weigand <uweigand@de.ibm.com> * i387-tdep.c (print_i387_value): Use floatformat_to_string. * sh64-tdep.c (sh64_do_fp_register): Likewise. * mips-tdep.c (mips_print_fp_register): Likewise.	2017-10-24 18:01:39 +02:00
Tom Tromey	981a3fb359	Constify add_prefix_cmd ... This changes add_prefix_cmd to accept a const-taking function as an argument; then fixes up all the callers. In a couple of spots I had to add a non-const overload of a function, because the function is passed to two different command-adding "constructors". These overloads are temporary; once constification is complete they can be removed. This patch also fixes a typo I happened to notice while constifying. Note that this touches a couple of files (gnu-nat.c and go32-nat.c) that I can't build. So, while I made a best-effort there, I am not certain they will still compile. Tested by rebuilding. gdb/ChangeLog 2017-10-11 Tom Tromey <tom@tromey.com> * gdbthread.h (thread_command): Constify. * inferior.h (detach_command): Constify. * top.h (set_history, show_history): Constify. * arm-tdep.c (set_arm_command, show_arm_command): Constify. * serial.c (serial_set_cmd, serial_show_cmd): Constify. * bsd-kvm.c (bsd_kvm_cmd): Constify. * printcmd.c (set_command): Constify. (non_const_set_command): New function. * dcache.c (set_dcache_command, show_dcache_command): Constify. * breakpoint.c (enable_command, disable_command, delete_command) (catch_command, tcatch_command, set_breakpoint_cmd) (show_breakpoint_cmd): Constify. * macrocmd.c (macro_command): Constify. * infcmd.c (unset_command, kill_command, detach_command) (info_proc_cmd): Constify. * i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Constify. * auto-load.c (show_auto_load_cmd, set_auto_load_cmd) (info_auto_load_cmd): Constify. * target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd) (unset_tdesc_cmd): Constify. * ada-lang.c (set_ada_command, show_ada_command) (maint_set_ada_cmd, maint_show_ada_cmd): Constify. * guile/guile.c (set_guile_command, show_guile_command) (info_guile_command): Constify. * tui/tui-win.c (tui_command, set_tui_cmd, show_tui_cmd): Constify. * skip.c (skip_command): Constify. * compile/compile.c (_initialize_compile): Constify. * dwarf2read.c (set_dwarf_cmd, show_dwarf_cmd): Constify. * btrace.c (maint_btrace_cmd, maint_btrace_set_cmd) (maint_btrace_show_cmd, maint_btrace_pt_set_cmd) (maint_btrace_pt_show_cmd): Constify. * remote.c (set_remote_cmd, show_remote_cmd, remote_command): Constify. * python/python.c (user_show_python, user_set_python): Constify. * mips-tdep.c (set_mips_command, show_mips_command) (set_mipsfpu_command): Constify. * record-btrace.c (cmd_record_btrace_start) (cmd_set_record_btrace, cmd_show_record_btrace) (cmd_set_record_btrace_bts, cmd_show_record_btrace_bts) (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): Constify. * rs6000-tdep.c (set_powerpc_command, show_powerpc_command): Constify. * symfile.c (overlay_command): Constify. * spu-tdep.c (set_spu_command, show_spu_command): Constify. * cli/cli-logging.c (set_logging_command, show_logging_command): Constify. * cli/cli-dump.c (dump_command, append_command) (srec_dump_command, ihex_dump_command, verilog_dump_command) (tekhex_dump_command, binary_dump_command) (binary_append_command): Constify. * cli/cli-decode.c (struct cmd_list_element): Change type of "fun". * cli/cli-cmds.c (info_command, show_command, set_debug) (show_debug): Constify. (show_command): Add non-const overload. * top.c (set_history, show_history): Constify. * sh-tdep.c (set_sh_command, show_sh_command): Constify. * command.h (add_prefix_cmd): Accept a cmd_const_cfunc_ftype. * target.c (target_command): Constify. * sparc64-tdep.c (info_adi_command): Constify. * record-full.c (cmd_record_full_start): Constify. (set_record_full_command): Constify. Fix typo. (show_record_full_command): Constify. * thread.c (thread_command, thread_apply_command): Constify. * memattr.c (dummy_cmd): Constify. * value.c (function_command): Constify. * frame.c (set_backtrace_cmd, show_backtrace_cmd): Constify. * probe.c (info_probes_command): Constify. * ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Constify. * gnu-nat.c (set_task_cmd, show_task_cmd, set_thread_cmd) (show_thread_cmd, set_thread_default_cmd) (show_thread_default_cmd): Constify. (check_empty): Constify. * tracepoint.c (tfind_command): Constify. * cp-support.c (maint_cplus_command): Constify. * windows-tdep.c (info_w32_command): Constify. * record.c (cmd_record_start, set_record_command) (show_record_command, info_record_command, cmd_record_goto): Constify. * ravenscar-thread.c (set_ravenscar_command) (show_ravenscar_command): Constify. * utils.c (set_internal_problem_cmd, show_internal_problem_cmd): Constify. (add_internal_problem_command): Remove casts. * arc-tdep.c (maintenance_print_arc_command): Constify. * valprint.c (set_print, show_print, set_print_raw) (show_print_raw): Constify. * maint.c (maintenance_command, maintenance_info_command) (maintenance_print_command, maintenance_set_cmd) (maintenance_show_cmd, set_per_command_cmd) (show_per_command_cmd, maintenance_check_command): Constify. * language.c (set_check, show_check): Constify. * typeprint.c (show_print_type, set_print_type): Constify. * go32-nat.c (go32_info_dos_command): Constify.	2017-10-11 16:21:02 -06:00
Ulrich Weigand	1841ee5d03	Clean up includes of doublest.h and floatformat.h ... As a first small step to getting rid of doublest.h, this patch removes the include of "floatformat.h" in "doublest.h". This is actually not needed for the file itself. A few source files now need to include "floatformat.h" directly, since they got it indirectly via "doublest.h" and still need it. In reviewing which files need it, I found a number of files that include "floatformat.h" directly without actually needing it at all. Similarly, a number of files include "doublest.h" without needing it. I've also removed those unnecessary include statements. gdb/ChangeLog: 2017-10-05 Ulrich Weigand <uweigand@de.ibm.com> * doublest.h: Do not include "floatformat.h". Remove stale comments. * gdbtypes.c: Include "floatformat.h". * value.c: Likewise. * m68k-tdep.c: Likewise. * findvar.c: Do not include "floatformat.h". * amd64-darwin-tdep.c: Likewise. * arm-linux-tdep.c: Likewise. * i386-darwin-tdep.c: Likewise. * i387-tdep.c: Likewise. * m68k-linux-tdep.c: Likewise. * mep-tdep.c: Likewise. * mips-tdep.c: Likewise. * nios2-tdep.c: Likewise. * s390-linux-tdep.c: Likewise. * sparc-obsd-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * spu-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * tilegx-tdep.c: Likewise. * vax-tdep.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-tdep.c: Likewise. * top.c: Do not include "doublest.h". * aarch64-tdep.c: Likewise. * alpha-tdep.c: Likewise. * arm-linux-tdep.c: Likewise. * m68k-linux-tdep.c: Likewise. * tilegx-tdep.c: Likewise. * xstormy16-tdep.c: Likewise.	2017-10-05 19:12:45 +02:00
Tom Tromey	bd4c9dfe67	Constify some commands in mips-tdep.c ... gdb/ChangeLog 2017-09-27 Tom Tromey <tom@tromey.com> * mips-tdep.c (show_mipsfpu_command, set_mipsfpu_single_command) (set_mipsfpu_double_command, set_mipsfpu_none_command) (set_mipsfpu_auto_command): Constify.	2017-09-27 08:44:52 -06:00
John Baldwin	481695ed5f	Remove unnecessary function prototypes. ... These prototypes were required when compiling GDB as C but are not required for C++. gdb/ChangeLog: * aarch64-linux-nat.c: Remove _initialize_aarch64_linux_nat prototype. * aarch64-linux-tdep.c: Remove _initialize_aarch64_linux_tdep prototype. * aarch64-newlib-tdep.c: Remove _initialize_aarch64_newlib_tdep prototype. * aarch64-tdep.c: Remove _initialize_aarch64_tdep prototype. * ada-exp.y: Remove _initialize_ada_exp prototype. * ada-lang.c: Remove _initialize_ada_language prototype. * ada-tasks.c: Remove _initialize_tasks prototype. * addrmap.c: Remove _initialize_addrmap prototype. * agent.c: Remove _initialize_agent prototype. * aix-thread.c: Remove _initialize_aix_thread prototype. * alpha-bsd-nat.c: Remove _initialize_alphabsd_nat prototype. * alpha-linux-nat.c: Remove _initialize_alpha_linux_nat prototype. * alpha-linux-tdep.c: Remove _initialize_alpha_linux_tdep prototype. * alpha-nbsd-tdep.c: Remove _initialize_alphanbsd_tdep prototype. * alpha-obsd-tdep.c: Remove _initialize_alphaobsd_tdep prototype. * alpha-tdep.c: Remove _initialize_alpha_tdep prototype. * amd64-darwin-tdep.c: Remove _initialize_amd64_darwin_tdep prototype. * amd64-dicos-tdep.c: Remove _initialize_amd64_dicos_tdep prototype. * amd64-fbsd-nat.c: Remove _initialize_amd64fbsd_nat prototype. * amd64-fbsd-tdep.c: Remove _initialize_amd64fbsd_tdep prototype. * amd64-linux-nat.c: Remove _initialize_amd64_linux_nat prototype. * amd64-linux-tdep.c: Remove _initialize_amd64_linux_tdep prototype. * amd64-nbsd-nat.c: Remove _initialize_amd64nbsd_nat prototype. * amd64-nbsd-tdep.c: Remove _initialize_amd64nbsd_tdep prototype. * amd64-obsd-nat.c: Remove _initialize_amd64obsd_nat prototype. * amd64-obsd-tdep.c: Remove _initialize_amd64obsd_tdep prototype. * amd64-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype. * amd64-tdep.c: Remove _initialize_amd64_tdep prototype. * amd64-windows-nat.c: Remove _initialize_amd64_windows_nat prototype. * amd64-windows-tdep.c: Remove _initialize_amd64_windows_tdep prototype. * annotate.c: Remove _initialize_annotate prototype. * arc-newlib-tdep.c: Remove _initialize_arc_newlib_tdep prototype. * arc-tdep.c: Remove _initialize_arc_tdep prototype. * arch-utils.c: Remove _initialize_gdbarch_utils prototype. * arm-linux-nat.c: Remove _initialize_arm_linux_nat prototype. * arm-linux-tdep.c: Remove _initialize_arm_linux_tdep prototype. * arm-nbsd-tdep.c: Remove _initialize_arm_netbsd_tdep prototype. * arm-obsd-tdep.c: Remove _initialize_armobsd_tdep prototype. * arm-symbian-tdep.c: Remove _initialize_arm_symbian_tdep prototype. * arm-tdep.c: Remove _initialize_arm_tdep prototype. * arm-wince-tdep.c: Remove _initialize_arm_wince_tdep prototype. * auto-load.c: Remove _initialize_auto_load prototype. * auxv.c: Remove _initialize_auxv prototype. * avr-tdep.c: Remove _initialize_avr_tdep prototype. * ax-gdb.c: Remove _initialize_ax_gdb prototype. * bfin-linux-tdep.c: Remove _initialize_bfin_linux_tdep prototype. * bfin-tdep.c: Remove _initialize_bfin_tdep prototype. * break-catch-sig.c: Remove _initialize_break_catch_sig prototype. * break-catch-syscall.c: Remove _initialize_break_catch_syscall prototype. * break-catch-throw.c: Remove _initialize_break_catch_throw prototype. * breakpoint.c: Remove _initialize_breakpoint prototype. * bsd-uthread.c: Remove _initialize_bsd_uthread prototype. * btrace.c: Remove _initialize_btrace prototype. * charset.c: Remove _initialize_charset prototype. * cli/cli-cmds.c: Remove _initialize_cli_cmds prototype. * cli/cli-dump.c: Remove _initialize_cli_dump prototype. * cli/cli-interp.c: Remove _initialize_cli_interp prototype. * cli/cli-logging.c: Remove _initialize_cli_logging prototype. * cli/cli-script.c: Remove _initialize_cli_script prototype. * coff-pe-read.c: Remove _initialize_coff_pe_read prototype. * coffread.c: Remove _initialize_coffread prototype. * compile/compile.c: Remove _initialize_compile prototype. * complaints.c: Remove _initialize_complaints prototype. * completer.c: Remove _initialize_completer prototype. * copying.awk: Remove _initialize_copying prototype. * copying.c: Regenerate. * core-regset.c: Remove _initialize_core_regset prototype. * corefile.c: Remove _initialize_core prototype. * corelow.c: Remove _initialize_corelow prototype. * cp-abi.c: Remove _initialize_cp_abi prototype. * cp-namespace.c: Remove _initialize_cp_namespace prototype. * cp-support.c: Remove _initialize_cp_support prototype. * cp-valprint.c: Remove _initialize_cp_valprint prototype. * cris-linux-tdep.c: Remove _initialize_cris_linux_tdep prototype. * cris-tdep.c: Remove _initialize_cris_tdep prototype. * ctf.c: Remove _initialize_ctf prototype. * d-lang.c: Remove _initialize_d_language prototype. * darwin-nat-info.c: Remove _initialize_darwin_info_commands prototype. * darwin-nat.c: Remove _initialize_darwin_inferior prototype. * dbxread.c: Remove _initialize_dbxread prototype. * dcache.c: Remove _initialize_dcache prototype. * demangle.c: Remove _initialize_demangler prototype. * disasm-selftests.c: Remove _initialize_disasm_selftests prototype. * disasm.c: Remove _initialize_disasm prototype. * dtrace-probe.c: Remove _initialize_dtrace_probe prototype. * dummy-frame.c: Remove _initialize_dummy_frame prototype. * dwarf2-frame-tailcall.c: Remove _initialize_tailcall_frame prototype. * dwarf2-frame.c: Remove _initialize_dwarf2_frame prototype. * dwarf2expr.c: Remove _initialize_dwarf2expr prototype. * dwarf2loc.c: Remove _initialize_dwarf2loc prototype. * dwarf2read.c: Remove _initialize_dwarf2_read prototype. * elfread.c: Remove _initialize_elfread prototype. * exec.c: Remove _initialize_exec prototype. * extension.c: Remove _initialize_extension prototype. * f-lang.c: Remove _initialize_f_language prototype. * f-valprint.c: Remove _initialize_f_valprint prototype. * fbsd-nat.c: Remove _initialize_fbsd_nat prototype. * fbsd-tdep.c: Remove _initialize_fbsd_tdep prototype. * filesystem.c: Remove _initialize_filesystem prototype. * findcmd.c: Remove _initialize_mem_search prototype. * fork-child.c: Remove _initialize_fork_child prototype. * frame-base.c: Remove _initialize_frame_base prototype. * frame-unwind.c: Remove _initialize_frame_unwind prototype. * frame.c: Remove _initialize_frame prototype. * frv-linux-tdep.c: Remove _initialize_frv_linux_tdep prototype. * frv-tdep.c: Remove _initialize_frv_tdep prototype. * ft32-tdep.c: Remove _initialize_ft32_tdep prototype. * gcore.c: Remove _initialize_gcore prototype. * gdb_bfd.c: Remove _initialize_gdb_bfd prototype. * gdbarch.c: Regenerate. * gdbarch.sh: Remove _initialize_gdbarch prototype. * gdbtypes.c: Remove _initialize_gdbtypes prototype. * gnu-nat.c: Remove _initialize_gnu_nat prototype. * gnu-v2-abi.c: Remove _initialize_gnu_v2_abi prototype. * gnu-v3-abi.c: Remove _initialize_gnu_v3_abi prototype. * go-lang.c: Remove _initialize_go_language prototype. * go32-nat.c: Remove _initialize_go32_nat prototype. * guile/guile.c: Remove _initialize_guile prototype. * h8300-tdep.c: Remove _initialize_h8300_tdep prototype. * hppa-linux-nat.c: Remove _initialize_hppa_linux_nat prototype. * hppa-linux-tdep.c: Remove _initialize_hppa_linux_tdep prototype. * hppa-nbsd-nat.c: Remove _initialize_hppanbsd_nat prototype. * hppa-nbsd-tdep.c: Remove _initialize_hppanbsd_tdep prototype. * hppa-obsd-nat.c: Remove _initialize_hppaobsd_nat prototype. * hppa-obsd-tdep.c: Remove _initialize_hppaobsd_tdep prototype. * hppa-tdep.c: Remove _initialize_hppa_tdep prototype. * i386-bsd-nat.c: Remove _initialize_i386bsd_nat prototype. * i386-cygwin-tdep.c: Remove _initialize_i386_cygwin_tdep prototype. * i386-darwin-tdep.c: Remove _initialize_i386_darwin_tdep prototype. * i386-dicos-tdep.c: Remove _initialize_i386_dicos_tdep prototype. * i386-fbsd-nat.c: Remove _initialize_i386fbsd_nat prototype. * i386-fbsd-tdep.c: Remove _initialize_i386fbsd_tdep prototype. * i386-gnu-nat.c: Remove _initialize_i386gnu_nat prototype. * i386-gnu-tdep.c: Remove _initialize_i386gnu_tdep prototype. * i386-linux-nat.c: Remove _initialize_i386_linux_nat prototype. * i386-linux-tdep.c: Remove _initialize_i386_linux_tdep prototype. * i386-nbsd-nat.c: Remove _initialize_i386nbsd_nat prototype. * i386-nbsd-tdep.c: Remove _initialize_i386nbsd_tdep prototype. * i386-nto-tdep.c: Remove _initialize_i386nto_tdep prototype. * i386-obsd-nat.c: Remove _initialize_i386obsd_nat prototype. * i386-obsd-tdep.c: Remove _initialize_i386obsd_tdep prototype. * i386-sol2-nat.c: Remove _initialize_amd64_sol2_nat prototype. * i386-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype. * i386-tdep.c: Remove _initialize_i386_tdep prototype. * i386-windows-nat.c: Remove _initialize_i386_windows_nat prototype. * ia64-libunwind-tdep.c: Remove _initialize_libunwind_frame prototype. * ia64-linux-nat.c: Remove _initialize_ia64_linux_nat prototype. * ia64-linux-tdep.c: Remove _initialize_ia64_linux_tdep prototype. * ia64-tdep.c: Remove _initialize_ia64_tdep prototype. * ia64-vms-tdep.c: Remove _initialize_ia64_vms_tdep prototype. * infcall.c: Remove _initialize_infcall prototype. * infcmd.c: Remove _initialize_infcmd prototype. * inferior.c: Remove _initialize_inferiors prototype. * inflow.c: Remove _initialize_inflow prototype. * infrun.c: Remove _initialize_infrun prototype. * interps.c: Remove _initialize_interpreter prototype. * iq2000-tdep.c: Remove _initialize_iq2000_tdep prototype. * jit.c: Remove _initialize_jit prototype. * language.c: Remove _initialize_language prototype. * linux-fork.c: Remove _initialize_linux_fork prototype. * linux-nat.c: Remove _initialize_linux_nat prototype. * linux-tdep.c: Remove _initialize_linux_tdep prototype. * linux-thread-db.c: Remove _initialize_thread_db prototype. * lm32-tdep.c: Remove _initialize_lm32_tdep prototype. * m2-lang.c: Remove _initialize_m2_language prototype. * m32c-tdep.c: Remove _initialize_m32c_tdep prototype. * m32r-linux-nat.c: Remove _initialize_m32r_linux_nat prototype. * m32r-linux-tdep.c: Remove _initialize_m32r_linux_tdep prototype. * m32r-tdep.c: Remove _initialize_m32r_tdep prototype. * m68hc11-tdep.c: Remove _initialize_m68hc11_tdep prototype. * m68k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype. * m68k-bsd-tdep.c: Remove _initialize_m68kbsd_tdep prototype. * m68k-linux-nat.c: Remove _initialize_m68k_linux_tdep prototype. * m68k-linux-tdep.c: Remove _initialize_m68k_linux_tdep prototype. * m68k-tdep.c: Remove _initialize_m68k_tdep prototype. * m88k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype. * m88k-tdep.c: Remove _initialize_m68kbsd_tdep prototype. * machoread.c: Remove _initialize_machoread prototype. * macrocmd.c: Remove _initialize_macrocmd prototype. * macroscope.c: Remove _initialize_macroscope prototype. * maint.c: Remove _initialize_maint_cmds prototype. * mdebugread.c: Remove _initialize_mdebugread prototype. * memattr.c: Remove _initialize_mem prototype. * mep-tdep.c: Remove _initialize_mep_tdep prototype. * mi/mi-cmd-env.c: Remove _initialize_mi_cmd_env prototype. * mi/mi-cmds.c: Remove _initialize_mi_cmds prototype. * mi/mi-interp.c: Remove _initialize_mi_interp prototype. * mi/mi-main.c: Remove _initialize_mi_main prototype. * microblaze-linux-tdep.c: Remove _initialize_microblaze_linux_tdep prototype. * microblaze-tdep.c: Remove _initialize_microblaze_tdep prototype. * mips-fbsd-nat.c: Remove _initialize_mips_fbsd_nat prototype. * mips-fbsd-tdep.c: Remove _initialize_mips_fbsd_tdep prototype. * mips-linux-nat.c: Remove _initialize_mips_linux_nat prototype. * mips-linux-tdep.c: Remove _initialize_mips_linux_tdep prototype. * mips-nbsd-nat.c: Remove _initialize_mipsnbsd_nat prototype. * mips-nbsd-tdep.c: Remove _initialize_mipsnbsd_tdep prototype. * mips-sde-tdep.c: Remove _initialize_mips_sde_tdep prototype. * mips-tdep.c: Remove _initialize_mips_tdep prototype. * mips64-obsd-nat.c: Remove _initialize_mips64obsd_nat prototype. * mips64-obsd-tdep.c: Remove _initialize_mips64obsd_tdep prototype. * mipsread.c: Remove _initialize_mipsread prototype. * mn10300-linux-tdep.c: Remove _initialize_mn10300_linux_tdep prototype. * mn10300-tdep.c: Remove _initialize_mn10300_tdep prototype. * moxie-tdep.c: Remove _initialize_moxie_tdep prototype. * msp430-tdep.c: Remove _initialize_msp430_tdep prototype. * mt-tdep.c: Remove _initialize_mt_tdep prototype. * nds32-tdep.c: Remove _initialize_nds32_tdep prototype. * nios2-linux-tdep.c: Remove _initialize_nios2_linux_tdep prototype. * nios2-tdep.c: Remove _initialize_nios2_tdep prototype. * nto-procfs.c: Remove _initialize_procfs prototype. * nto-tdep.c: Remove _initialize_nto_tdep prototype. * objc-lang.c: Remove _initialize_objc_language prototype. * objfiles.c: Remove _initialize_objfiles prototype. * observer.c: Remove observer_test_first_notification_function, observer_test_second_notification_function, observer_test_third_notification_function, and _initialize_observer prototypes. * opencl-lang.c: Remove _initialize_opencl_language prototypes. * osabi.c: Remove _initialize_gdb_osabi prototype. * osdata.c: Remove _initialize_osdata prototype. * p-valprint.c: Remove _initialize_pascal_valprint prototype. * parse.c: Remove _initialize_parse prototype. * ppc-fbsd-nat.c: Remove _initialize_ppcfbsd_nat prototype. * ppc-fbsd-tdep.c: Remove _initialize_ppcfbsd_tdep prototype. * ppc-linux-nat.c: Remove _initialize_ppc_linux_nat prototype. * ppc-linux-tdep.c: Remove _initialize_ppc_linux_tdep prototype. * ppc-nbsd-nat.c: Remove _initialize_ppcnbsd_nat prototype. * ppc-nbsd-tdep.c: Remove _initialize_ppcnbsd_tdep prototype. * ppc-obsd-nat.c: Remove _initialize_ppcobsd_nat prototype. * ppc-obsd-tdep.c: Remove _initialize_ppcobsd_tdep prototype. * printcmd.c: Remove _initialize_printcmd prototype. * probe.c: Remove _initialize_probe prototype. * proc-api.c: Remove _initialize_proc_api prototype. * proc-events.c: Remove _initialize_proc_events prototype. * proc-service.c: Remove _initialize_proc_service prototype. * procfs.c: Remove _initialize_procfs prototype. * psymtab.c: Remove _initialize_psymtab prototype. * python/python.c: Remove _initialize_python prototype. * ravenscar-thread.c: Remove _initialize_ravenscar prototype. * record-btrace.c: Remove _initialize_record_btrace prototype. * record-full.c: Remove _initialize_record_full prototype. * record.c: Remove _initialize_record prototype. * regcache.c: Remove _initialize_regcache prototype. * reggroups.c: Remove _initialize_reggroup prototype. * remote-notif.c: Remove _initialize_notif prototype. * remote-sim.c: Remove _initialize_remote_sim prototype. * remote.c: Remove _initialize_remote prototype. * reverse.c: Remove _initialize_reverse prototype. * rl78-tdep.c: Remove _initialize_rl78_tdep prototype. * rs6000-aix-tdep.c: Remove _initialize_rs6000_aix_tdep prototype. * rs6000-lynx178-tdep.c: Remove _initialize_rs6000_lynx178_tdep prototype. * rs6000-nat.c: Remove _initialize_rs6000_nat prototype. * rs6000-tdep.c: Remove _initialize_rs6000_tdep prototype. * rust-exp.y: Remove _initialize_rust_exp prototype. * rx-tdep.c: Remove _initialize_rx_tdep prototype. * s390-linux-nat.c: Remove _initialize_s390_nat prototype. * s390-linux-tdep.c: Remove _initialize_s390_tdep prototype. * score-tdep.c: Remove _initialize_score_tdep prototype. * selftest-arch.c: Remove _initialize_selftests_foreach_arch prototype. * ser-go32.c: Remove _initialize_ser_dos prototype. * ser-mingw.c: Remove _initialize_ser_windows prototype. * ser-pipe.c: Remove _initialize_ser_pipe prototype. * ser-tcp.c: Remove _initialize_ser_tcp prototype. * ser-unix.c: Remove _initialize_ser_hardwire prototype. * serial.c: Remove _initialize_serial prototype. * sh-linux-tdep.c: Remove _initialize_sh_linux_tdep prototype. * sh-nbsd-nat.c: Remove _initialize_shnbsd_nat prototype. * sh-nbsd-tdep.c: Remove _initialize_shnbsd_tdep prototype. * sh-tdep.c: Remove _initialize_sh_tdep prototype. * skip.c: Remove _initialize_step_skip prototype. * sol-thread.c: Remove _initialize_sol_thread prototype. * solib-aix.c: Remove _initialize_solib_aix prototype. * solib-darwin.c: Remove _initialize_darwin_solib prototype. * solib-dsbt.c: Remove _initialize_dsbt_solib prototype. * solib-frv.c: Remove _initialize_frv_solib prototype. * solib-spu.c: Remove _initialize_spu_solib prototype. * solib-svr4.c: Remove _initialize_svr4_solib prototype. * solib-target.c: Remove _initialize_solib_target prototype. * solib.c: Remove _initialize_solib prototype. * source.c: Remove _initialize_source prototype. * sparc-linux-nat.c: Remove _initialize_sparc_linux_nat prototype. * sparc-linux-tdep.c: Remove _initialize_sparc_linux_tdep prototype. * sparc-nat.c: Remove _initialize_sparc_nat prototype. * sparc-nbsd-nat.c: Remove _initialize_sparcnbsd_nat prototype. * sparc-nbsd-tdep.c: Remove _initialize_sparcnbsd_tdep prototype. * sparc-obsd-tdep.c: Remove _initialize_sparc32obsd_tdep prototype. * sparc-sol2-nat.c: Remove _initialize_sparc_sol2_nat prototype. * sparc-sol2-tdep.c: Remove _initialize_sparc_sol2_tdep prototype. * sparc-tdep.c: Remove _initialize_sparc_tdep prototype. * sparc64-fbsd-nat.c: Remove _initialize_sparc64fbsd_nat prototype. * sparc64-fbsd-tdep.c: Remove _initialize_sparc64fbsd_tdep prototype. * sparc64-linux-nat.c: Remove _initialize_sparc64_linux_nat prototype. * sparc64-linux-tdep.c: Remove _initialize_sparc64_linux_tdep prototype. * sparc64-nat.c: Remove _initialize_sparc64_nat prototype. * sparc64-nbsd-nat.c: Remove _initialize_sparc64nbsd_nat prototype. * sparc64-nbsd-tdep.c: Remove _initialize_sparc64nbsd_tdep prototype. * sparc64-obsd-nat.c: Remove _initialize_sparc64obsd_nat prototype. * sparc64-obsd-tdep.c: Remove _initialize_sparc64obsd_tdep prototype. * sparc64-sol2-tdep.c: Remove _initialize_sparc64_sol2_tdep prototype. * spu-linux-nat.c: Remove _initialize_spu_nat prototype. * spu-multiarch.c: Remove _initialize_spu_multiarch prototype. * spu-tdep.c: Remove _initialize_spu_tdep prototype. * stabsread.c: Remove _initialize_stabsread prototype. * stack.c: Remove _initialize_stack prototype. * stap-probe.c: Remove _initialize_stap_probe prototype. * std-regs.c: Remove _initialize_frame_reg prototype. * symfile-debug.c: Remove _initialize_symfile_debug prototype. * symfile-mem.c: Remove _initialize_symfile_mem prototype. * symfile.c: Remove _initialize_symfile prototype. * symmisc.c: Remove _initialize_symmisc prototype. * symtab.c: Remove _initialize_symtab prototype. * target-dcache.c: Remove _initialize_target_dcache prototype. * target-descriptions.c: Remove _initialize_target_descriptions prototype. * thread.c: Remove _initialize_thread prototype. * tic6x-linux-tdep.c: Remove _initialize_tic6x_linux_tdep prototype. * tic6x-tdep.c: Remove _initialize_tic6x_tdep prototype. * tilegx-linux-nat.c: Remove _initialize_tile_linux_nat prototype. * tilegx-linux-tdep.c: Remove _initialize_tilegx_linux_tdep prototype. * tilegx-tdep.c: Remove _initialize_tilegx_tdep prototype. * tracefile-tfile.c: Remove _initialize_tracefile_tfile prototype. * tracefile.c: Remove _initialize_tracefile prototype. * tracepoint.c: Remove _initialize_tracepoint prototype. * tui/tui-hooks.c: Remove _initialize_tui_hooks prototype. * tui/tui-interp.c: Remove _initialize_tui_interp prototype. * tui/tui-layout.c: Remove _initialize_tui_layout prototype. * tui/tui-regs.c: Remove _initialize_tui_regs prototype. * tui/tui-stack.c: Remove _initialize_tui_stack prototype. * tui/tui-win.c: Remove _initialize_tui_win prototype. * tui/tui.c: Remove _initialize_tui prototype. * typeprint.c: Remove _initialize_typeprint prototype. * user-regs.c: Remove _initialize_user_regs prototype. * utils.c: Remove _initialize_utils prototype. * v850-tdep.c: Remove _initialize_v850_tdep prototype. * valarith.c: Remove _initialize_valarith prototype. * valops.c: Remove _initialize_valops prototype. * valprint.c: Remove _initialize_valprint prototype. * value.c: Remove _initialize_values prototype. * varobj.c: Remove _initialize_varobj prototype. * vax-bsd-nat.c: Remove _initialize_vaxbsd_nat prototype. * vax-nbsd-tdep.c: Remove _initialize_vaxnbsd_tdep prototype. * vax-tdep.c: Remove _initialize_vax_tdep prototype. * windows-nat.c: Remove _initialize_windows_nat, _initialize_check_for_gdb_ini, and _initialize_loadable prototypes. * windows-tdep.c: Remove _initialize_windows_tdep prototype. * xcoffread.c: Remove _initialize_xcoffread prototype. * xml-support.c: Remove _initialize_xml_support prototype. * xstormy16-tdep.c: Remove _initialize_xstormy16_tdep prototype. * xtensa-linux-nat.c: Remove _initialize_xtensa_linux_nat prototype. * xtensa-linux-tdep.c: Remove _initialize_xtensa_linux_tdep prototype. * xtensa-tdep.c: Remove _initialize_xtensa_tdep prototype.	2017-09-09 11:02:37 -07:00
Maciej W. Rozycki	0dba2a6c09	gdbarch: Use an anonymous union for target data in `gdbarch_info' ... As an update to commit ede5f15146 ("gdbarch.h: Change gdbarch_info::tdep_info's type to void *") replace the definition of the `tdep_info' member in `struct gdbarch_info' with an anonymous union, comprising the original member, with its type reverted to `struct gdbarch_tdep_info *', a `tdesc_data' member of a `struct tdesc_arch_data *' type and an `id' member of an `int *' type. Remove now unnecessary casts throughout use places then, making code easier to read an less prone to errors, which may happen with casting. gdb/ * gdbarch.sh (gdbarch_info): Replace the `tdep_info' member with a union of `tdep_info', `tdesc_data' and `id'. * aarch64-tdep.c (aarch64_gdbarch_init): Use `info.tdesc_data' rather than `info.tdep_info'. * amd64-linux-tdep.c (amd64_linux_init_abi): Likewise. * i386-linux-tdep.c (i386_linux_init_abi): Likewise. * i386-tdep.c (i386_gdbarch_init): Likewise. * mips-linux-tdep.c (mips_linux_init_abi): Likewise. * mips-tdep.c (mips_gdbarch_init): Likewise. * nds32-tdep.c (nds32_gdbarch_init): Likewise. * rs6000-tdep.c (rs6000_gdbarch_init): Likewise. * ppc-linux-tdep.c (ppu2spu_sniffer): Use `info.id' rather than `info.tdep_info'. (ppc_linux_init_abi): Use `info.tdesc_data' rather than `info.tdep_info'. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * spu-multiarch.c (spu_gdbarch): Use `info.id' rather than `info.tdep_info'. * spu-tdep.c (spu_gdbarch_init): Likewise. * gdbarch.h: Regenerate.	2017-08-07 15:53:54 +01:00
Maciej W. Rozycki	a4f320fd1b	MIPS: Factor out FPU type naming in `gdbarch' debug ... Replace chains of conditional expressions used in target-dependent MIPS `gdbarch' debug output to get a textual name of the FPU type with calls to a helper decoder function, improving code readability. No functional change. gdb/ * mips-tdep.c (mips_fpu_type_str): New function. (mips_dump_tdep): Call it.	2017-08-02 16:40:16 +01:00
Maciej W. Rozycki	a2f1f30853	MIPS: Consistently use MIPS_FPU_TYPE for `gdbarch' member ... Complement commit 74ed0bb414 ("Replace current_gdbarch in *mips*"), <https://sourceware.org/ml/gdb-patches/2008-06/msg00490.html>, and consistently use the MIPS_FPU_TYPE macro to access the `->mips_fpu_type' target-dependent `gdbarch' member. No functional change. gdb/ * mips-tdep.c (mips_gdbarch_init): Use MIPS_FPU_TYPE to access `->mips_fpu_type'.	2017-08-01 19:32:25 +01:00
John Baldwin	325c9fd4aa	Don't throw an error in 'info registers' for unavailable MIPS registers. ... 'info registers' for MIPS throws an error and when it first encounters an unavailable register. This does not match other architectures which annotate unavailable registers and continue to print out the values of subsequent registers. Replace the error by displaying an aligned "<unavailable>". This string is truncated to "<unavl>" when displaying a 32-bit register. gdb/ChangeLog: * mips-tdep.c (print_gp_register_row): Don't error for unavailable registers.	2017-06-19 14:40:22 -07:00
Yao Qi	6394c60699	Don't use print_insn_XXX in GDB ... This is a follow-up to [PATCH 0/6] Unify the disassembler selection in gdb and objdump https://sourceware.org/ml/binutils/2017-05/msg00192.html that is, opcodes is able to select the right disassembler, so gdb doesn't have to select them. Instead, gdb can just use default_print_insn. As a result, these print_insn_XXX are not used out of opcodes, so this patch also moves their declarations from include/dis-asm.h to opcodes/disassemble.h. With this change, GDB doesn't use any print_insn_XXX directly any more. gdb: 2017-06-14 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_gdb_print_insn): Call default_print_insn instead of print_insn_aarch64. * arm-tdep.c (gdb_print_insn_arm): Call default_print_insn instead of print_insn_big_arm and print_insn_little_arm. * i386-tdep.c (i386_print_insn): Call default_print_insn instead of print_insn_i386. * ia64-tdep.c (ia64_print_insn): Call default_print_insn instead of print_insn_ia64. * mips-tdep.c (gdb_print_insn_mips): Call default_print_insn instead of print_insn_big_mips and print_insn_little_mips. * spu-tdep.c (gdb_print_insn_spu): Call default_print_insn instead of print_insn_spu. include: 2017-06-14 Yao Qi <yao.qi@linaro.org> * dis-asm.h (print_insn_aarch64): Move it to opcodes/disassemble.h. (print_insn_big_arm, print_insn_big_mips): Likewise. (print_insn_i386, print_insn_ia64): Likewise. (print_insn_little_arm, print_insn_little_mips): Likewise. (print_insn_spu): Likewise. opcodes: 2017-06-14 Yao Qi <yao.qi@linaro.org> * aarch64-dis.c: Include disassemble.h instead of dis-asm.h. * arm-dis.c: Likewise. * ia64-dis.c: Likewise. * mips-dis.c: Likewise. * spu-dis.c: Likewise. * disassemble.h (print_insn_aarch64): New declaration, moved from include/dis-asm.h. (print_insn_big_arm, print_insn_big_mips): Likewise. (print_insn_i386, print_insn_ia64): Likewise. (print_insn_little_arm, print_insn_little_mips): Likewise.	2017-06-14 16:29:01 +01:00
Pedro Alves	b3464d0316	mips-tdep.c: Remove MAX_REGISTER_SIZE usage ... mips_eabi_push_dummy_call is storing the address of a struct in a buffer that must have the same of the confisued/set ABI register size. Add a define for the maximum ABI size and use it to size the local buffer. Also rename the 'regsize' local to 'abi_regsize' for clarity. Tested that --enable-targets=all still builds. gdb/ChangeLog: 2017-06-12 Pedro Alves <palves@redhat.com> Alan Hayward <alan.hayward@arm.com> * mips-tdep.c (MAX_MIPS_ABI_REGSIZE): New. (mips_eabi_push_dummy_call): Rename local 'regsize' to 'abi_regsize'. Rename local array 'valbuf' to 'ref_valbuf', and use MAX_MIPS_ABI_REGSIZE instead of MAX_REGISTER_SIZE to size it. Assert that abi_regsize bytes fit in 'ref_valbuf'.	2017-06-12 19:04:52 +01:00
Yao Qi	cdd238daf9	Use XCNEW gdbarch_tdep ... This patch uses XCNEW gdbarch_tdep instead of XNEW. gdb: 2017-05-24 Yao Qi <yao.qi@linaro.org> * alpha-tdep.c (alpha_gdbarch_init): Use XCNEW instead of XNEW. * avr-tdep.c (avr_gdbarch_init): Likewise. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * cris-tdep.c (cris_gdbarch_init): Likewise. * ft32-tdep.c (ft32_gdbarch_init): Likewise. * lm32-tdep.c (lm32_gdbarch_init): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise. * mep-tdep.c (mep_gdbarch_init): Likewise. * microblaze-tdep.c (microblaze_gdbarch_init): Likewise. * mips-tdep.c (mips_gdbarch_init): Likewise. * mn10300-tdep.c (mn10300_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * msp430-tdep.c (msp430_gdbarch_init): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * v850-tdep.c (v850_gdbarch_init): Likewise.	2017-05-24 22:15:23 +01:00
Alan Hayward	313c596122	Remove some uses of MAX_REGISTER_SIZE from mips-tdep.c ... gdb/ * mips-tdep.c (mips_o32_return_value): Remove unused buffer. (print_gp_register_row): Use get_frame_register_value.	2017-05-08 09:40:07 +01:00
Simon Marchi	a0ff9e1ad2	Change return type of gdbarch_software_single_step to vector<CORE_ADDR> ... This is a relatively straightforward patch that changes gdbarch_software_single_step so it returns an std::vector<CORE_ADDR> instead of a VEC (CORE_ADDR). gdb/ChangeLog: * gdbarch.sh (software_single_step): Change return type to std::vector<CORE_ADDR>. * gdbarch.c, gdbarch.h: Re-generate. * arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw): Adjust. (arm_deal_with_atomic_sequence_raw): Adjust. (thumb_get_next_pcs_raw): Adjust. (arm_get_next_pcs_raw): Adjust. (arm_get_next_pcs): Adjust. * arch/arm-get-next-pcs.h (arm_get_next_pcs): Adjust. * aarch64-tdep.c (aarch64_software_single_step): Adjust. * alpha-tdep.c (alpha_deal_with_atomic_sequence): Adjust. (alpha_software_single_step): Adjust. * alpha-tdep.h (alpha_software_single_step): Adjust. * arm-linux-tdep.c (arm_linux_software_single_step): Adjust. * arm-tdep.c (arm_software_single_step): Adjust. (arm_breakpoint_kind_from_current_state): Adjust. * arm-tdep.h (arm_software_single_step): Adjust. * breakpoint.c (insert_single_step_breakpoint): Adjust. * cris-tdep.c (cris_software_single_step): Adjust. * mips-tdep.c (mips_deal_with_atomic_sequence): Adjust. (micromips_deal_with_atomic_sequence): Adjust. (deal_with_atomic_sequence): Adjust. (mips_software_single_step): Adjust. * mips-tdep.h (mips_software_single_step): Adjust. * moxie-tdep.c (moxie_software_single_step): Adjust. * nios2-tdep.c (nios2_software_single_step): Adjust. * ppc-tdep.h (ppc_deal_with_atomic_sequence): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * s390-linux-tdep.c (s390_software_single_step): Adjust. * sparc-tdep.c (sparc_software_single_step): Adjust. * spu-tdep.c (spu_software_single_step): Adjust. * tic6x-tdep.c (tic6x_software_single_step): Adjust. gdb/gdbserver/ChangeLog: * linux-arm-low.c (arm_gdbserver_get_next_pcs): Adjust to software_single_step change of return type to std::vector<CORE_ADDR>. * linux-low.c (install_software_single_step_breakpoints): Likewise. * linux-low.h (install_software_single_step_breakpoints): Likewise.	2017-05-02 13:30:07 -04:00
John Baldwin	428544e8ae	Consistently use fprintf_filtered when displaying MIPS registers. ... One line was using printf_filtered instead of fprintf_filtered to the requested file. gdb/ChangeLog: * mips-tdep.c (print_gp_register_row): Replace printf_filtered with fprintf_filtered.	2017-04-28 09:35:14 -07:00
Pedro Alves	a121b7c1ac	-Wwrite-strings: The Rest ... This is the remainder boring constification that all looks more of less borderline obvious IMO. gdb/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * ada-exp.y (yyerror): Constify. * ada-lang.c (bound_name, get_selections) (ada_variant_discrim_type) (ada_variant_discrim_name, ada_value_struct_elt) (ada_lookup_struct_elt_type, is_unchecked_variant) (ada_which_variant_applies, standard_exc, ada_get_next_arg) (catch_ada_exception_command_split) (catch_ada_assert_command_split, catch_assert_command) (ada_op_name): Constify. * ada-lang.h (ada_yyerror, get_selections) (ada_variant_discrim_name, ada_value_struct_elt): Constify. * arc-tdep.c (arc_print_frame_cache): Constify. * arm-tdep.c (arm_skip_stub): Constify. * ax-gdb.c (gen_binop, gen_struct_ref_recursive, gen_struct_ref) (gen_aggregate_elt_ref): Constify. * bcache.c (print_bcache_statistics): Constify. * bcache.h (print_bcache_statistics): Constify. * break-catch-throw.c (catch_exception_command_1): * breakpoint.c (struct ep_type_description::description): Constify. (add_solib_catchpoint): Constify. (catch_fork_command_1): Add cast. (add_catch_command): Constify. * breakpoint.h (add_catch_command, add_solib_catchpoint): Constify. * bsd-uthread.c (bsd_uthread_state): Constify. * buildsym.c (patch_subfile_names): Constify. * buildsym.h (next_symbol_text_func, patch_subfile_names): Constify. * c-exp.y (yyerror): Constify. (token::oper): Constify. * c-lang.h (c_yyerror, cp_print_class_member): Constify. * c-varobj.c (cplus_describe_child): Constify. * charset.c (find_charset_names): Add cast. (find_charset_names): Constify array and add const_cast. * cli/cli-cmds.c (complete_command, cd_command): Constify. (edit_command): Constify. * cli/cli-decode.c (lookup_cmd): Constify. * cli/cli-dump.c (dump_memory_command, dump_value_command): Constify. (struct dump_context): Constify. (add_dump_command, restore_command): Constify. * cli/cli-script.c (get_command_line): Constify. * cli/cli-script.h (get_command_line): Constify. * cli/cli-utils.c (check_for_argument): Constify. * cli/cli-utils.h (check_for_argument): Constify. * coff-pe-read.c (struct read_pe_section_data): Constify. * command.h (lookup_cmd): Constify. * common/print-utils.c (decimal2str): Constify. * completer.c (gdb_print_filename): Constify. * corefile.c (set_gnutarget): Constify. * cp-name-parser.y (yyerror): Constify. * cp-valprint.c (cp_print_class_member): Constify. * cris-tdep.c (cris_register_name, crisv32_register_name): Constify. * d-exp.y (yyerror): Constify. (struct token::oper): Constify. * d-lang.h (d_yyerror): Constify. * dbxread.c (struct header_file_location::name): Constify. (add_old_header_file, add_new_header_file, last_function_name) (dbx_next_symbol_text, add_bincl_to_list) (find_corresponding_bincl_psymtab, set_namestring) (find_stab_function_addr, read_dbx_symtab, start_psymtab) (dbx_end_psymtab, read_ofile_symtab, process_one_symbol): * defs.h (command_line_input, print_address_symbolic) (deprecated_readline_begin_hook): Constify. * dwarf2read.c (anonymous_struct_prefix, dwarf_bool_name): Constify. * event-top.c (handle_line_of_input): Constify and add cast. * exceptions.c (catch_errors): Constify. * exceptions.h (catch_errors): Constify. * expprint.c (print_subexp_standard, op_string, op_name) (op_name_standard, dump_raw_expression, dump_raw_expression): * expression.h (op_name, op_string, dump_raw_expression): Constify. * f-exp.y (yyerror): Constify. (struct token::oper): Constify. (struct f77_boolean_val::name): Constify. * f-lang.c (f_word_break_characters): Constify. * f-lang.h (f_yyerror): Constify. * fork-child.c (fork_inferior): Add cast. * frv-tdep.c (struct gdbarch_tdep::register_names): Constify. (new_variant): Constify. * gdbarch.sh (pstring_ptr, pstring_list): Constify. * gdbarch.c: Regenerate. * gdbcore.h (set_gnutarget): Constify. * go-exp.y (yyerror): Constify. (token::oper): Constify. * go-lang.h (go_yyerror): Constify. * go32-nat.c (go32_sysinfo): Constify. * guile/scm-breakpoint.c (gdbscm_breakpoint_expression): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * guile/scm-param.c (pascm_param_value): Constify. * h8300-tdep.c (h8300_register_name, h8300s_register_name) (h8300sx_register_name): Constify. * hppa-tdep.c (hppa32_register_name, hppa64_register_name): Constify. * ia64-tdep.c (ia64_register_names): Constify. * infcmd.c (construct_inferior_arguments): Constify. (path_command, attach_post_wait): Constify. * language.c (show_range_command, show_case_command) (unk_lang_error): Constify. * language.h (language_defn::la_error) (language_defn::la_name_of_this): Constify. * linespec.c (decode_line_2): Constify. * linux-thread-db.c (thread_db_err_str): Constify. * lm32-tdep.c (lm32_register_name): Constify. * m2-exp.y (yyerror): Constify. * m2-lang.h (m2_yyerror): Constify. * m32r-tdep.c (m32r_register_names): Constify and make static. * m68hc11-tdep.c (m68hc11_register_names): Constify. * m88k-tdep.c (m88k_register_name): Constify. * macroexp.c (appendmem): Constify. * mdebugread.c (fdr_name, add_data_symbol, parse_type) (upgrade_type, parse_external, parse_partial_symbols) (mdebug_next_symbol_text, cross_ref, mylookup_symbol, new_psymtab) (new_symbol): Constify. * memattr.c (mem_info_command): Constify. * mep-tdep.c (register_name_from_keyword): Constify. * mi/mi-cmd-env.c (mi_cmd_env_path, _initialize_mi_cmd_env): Constify. * mi/mi-cmd-stack.c (list_args_or_locals): Constify. * mi/mi-cmd-var.c (mi_cmd_var_show_attributes): Constify. * mi/mi-main.c (captured_mi_execute_command): Constify and add cast. (mi_execute_async_cli_command): Constify. * mips-tdep.c (mips_register_name): Constify. * mn10300-tdep.c (register_name, mn10300_generic_register_name) (am33_register_name, am33_2_register_name) * moxie-tdep.c (moxie_register_names): Constify. * nat/linux-osdata.c (osdata_type): Constify fields. * nto-tdep.c (nto_parse_redirection): Constify. * objc-lang.c (lookup_struct_typedef, lookup_objc_class) (lookup_child_selector): Constify. (objc_methcall::name): Constify. * objc-lang.h (lookup_objc_class, lookup_child_selector) (lookup_struct_typedef): Constify. * objfiles.c (pc_in_section): Constify. * objfiles.h (pc_in_section): Constify. * p-exp.y (struct token::oper): Constify. (yyerror): Constify. * p-lang.h (pascal_yyerror): Constify. * parser-defs.h (op_name_standard): Constify. (op_print::string): Constify. (exp_descriptor::op_name): Constify. * printcmd.c (print_address_symbolic): Constify. * psymtab.c (print_partial_symbols): Constify. * python/py-breakpoint.c (stop_func): Constify. (bppy_get_expression): Constify. * python/py-cmd.c (cmdpy_completer::name): Constify. (cmdpy_function): Constify. * python/py-event.c (evpy_add_attribute) (gdbpy_initialize_event_generic): Constify. * python/py-event.h (evpy_add_attribute) (gdbpy_initialize_event_generic): Constify. * python/py-evts.c (add_new_registry): Constify. * python/py-finishbreakpoint.c (outofscope_func): Constify. * python/py-framefilter.c (get_py_iter_from_func): Constify. * python/py-inferior.c (get_buffer): Add cast. * python/py-param.c (parm_constant::name): Constify. * python/py-unwind.c (fprint_frame_id): Constify. * python/python.c (gdbpy_parameter_value): Constify. * remote-fileio.c (remote_fio_func_map): Make 'name' const. * remote.c (memory_packet_config::name): Constify. (show_packet_config_cmd, remote_write_bytes) (remote_buffer_add_string): * reverse.c (exec_reverse_once): Constify. * rs6000-tdep.c (variant::name, variant::description): Constify. * rust-exp.y (rustyyerror): Constify. * rust-lang.c (rust_op_name): Constify. * rust-lang.h (rustyyerror): Constify. * serial.h (serial_ops::name): Constify. * sh-tdep.c (sh_sh_register_name, sh_sh3_register_name) (sh_sh3e_register_name, sh_sh2e_register_name) (sh_sh2a_register_name, sh_sh2a_nofpu_register_name) (sh_sh_dsp_register_name, sh_sh3_dsp_register_name) (sh_sh4_register_name, sh_sh4_nofpu_register_name) (sh_sh4al_dsp_register_name): Constify. * sh64-tdep.c (sh64_register_name): Constify. * solib-darwin.c (lookup_symbol_from_bfd): Constify. * spu-tdep.c (spu_register_name, info_spu_dma_cmdlist): Constify. * stabsread.c (patch_block_stabs, read_type_number) (ref_map::stabs, ref_add, process_reference) (symbol_reference_defined, define_symbol, define_symbol) (error_type, read_type, read_member_functions, read_cpp_abbrev) (read_one_struct_field, read_struct_fields, read_baseclasses) (read_tilde_fields, read_struct_type, read_array_type) (read_enum_type, read_sun_builtin_type, read_sun_floating_type) (read_huge_number, read_range_type, read_args, common_block_start) (find_name_end): Constify. * stabsread.h (common_block_start, define_symbol) (process_one_symbol, symbol_reference_defined, ref_add): * symfile.c (get_section_index, add_symbol_file_command): * symfile.h (get_section_index): Constify. * target-descriptions.c (tdesc_type::name): Constify. (tdesc_free_type): Add cast. * target.c (find_default_run_target): (add_deprecated_target_alias, find_default_run_target) (target_announce_detach): Constify. (do_option): Constify. * target.h (add_deprecated_target_alias): Constify. * thread.c (print_thread_info_1): Constify. * top.c (deprecated_readline_begin_hook, command_line_input): Constify. (init_main): Add casts. * top.h (handle_line_of_input): Constify. * tracefile-tfile.c (tfile_write_uploaded_tsv): Constify. * tracepoint.c (tvariables_info_1, trace_status_mi): Constify. (tfind_command): Rename to ... (tfind_command_1): ... this and constify. (tfind_command): New function. (tfind_end_command, tfind_start_command): Adjust. (encode_source_string): Constify. * tracepoint.h (encode_source_string): Constify. * tui/tui-data.c (tui_partial_win_by_name): Constify. * tui/tui-data.h (tui_partial_win_by_name): Constify. * tui/tui-source.c (tui_set_source_content_nil): Constify. * tui/tui-source.h (tui_set_source_content_nil): Constify. * tui/tui-win.c (parse_scrolling_args): Constify. * tui/tui-windata.c (tui_erase_data_content): Constify. * tui/tui-windata.h (tui_erase_data_content): Constify. * tui/tui-winsource.c (tui_erase_source_content): Constify. * tui/tui.c (tui_enable): Add cast. * utils.c (defaulted_query): Constify. (init_page_info): Add cast. (puts_debug, subset_compare): Constify. * utils.h (subset_compare): Constify. * varobj.c (varobj_format_string): Constify. * varobj.h (varobj_format_string): Constify. * vax-tdep.c (vax_register_name): Constify. * windows-nat.c (windows_detach): Constify. * xcoffread.c (process_linenos, xcoff_next_symbol_text): Constify. * xml-support.c (gdb_xml_end_element): Constify. * xml-tdesc.c (tdesc_start_reg): Constify. * xstormy16-tdep.c (xstormy16_register_name): Constify. * xtensa-tdep.c (xtensa_find_register_by_name): Constify. * xtensa-tdep.h (xtensa_register_t::name): Constify. gdb/gdbserver/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * gdbreplay.c (sync_error): Constify. * linux-x86-low.c (push_opcode): Constify.	2017-04-05 19:21:37 +01:00
Yao Qi	e47ad6c0bd	Refactor disassembly code ... This patch addes class gdb_disassembler, and refactor code to use it. The gdb_disassembler object is saved in disassember_info.application_data. However, disassember_info.application_data is already used by gdb for arm, mips spu, and scm-disasm. In arm and mips, .application_data is gdbarch, but we can still get gdbarch from gdb_disassember. The use of application_data in spu is a little bit complicated. It creates its own disassemble_info, and save spu_dis_asm_data in .application_data. This will overwrite the pointer to gdb_disassembler, so we need to find another place to save spu_dis_asm_data. I extend disassemble_info, and put "id" there. gdb: 2017-01-26 Pedro Alves <palves@redhat.com> Yao Qi <yao.qi@linaro.org> * arm-tdep.c: Include "disasm.h". (gdb_print_insn_arm): Update code to get gdbarch. * disasm.c (dis_asm_read_memory): Change it to gdb_disassembler::dis_asm_read_memory. (dis_asm_memory_error): Likewise. (dis_asm_print_address): Likewise. (gdb_pretty_print_insn): Change it to gdb_disassembler::pretty_print_insn. (dump_insns): Add one argument gdb_disassemlber. All callers updated. (do_mixed_source_and_assembly_deprecated): Likewise. (do_mixed_source_and_assembly): Likewise. (do_assembly_only): Likewise. (gdb_disassembler::gdb_disassembler): New. (gdb_disassembler::print_insn): New. * disasm.h (class gdb_disassembler): New. (gdb_pretty_print_insn): Remove declaration. (gdb_disassemble_info): Likewise. * guile/scm-disasm.c (class gdbscm_disassembler): New. (gdbscm_disasm_read_memory_worker): Update. (gdbscm_disasm_read_memory): Update. (gdbscm_disasm_memory_error): Remove. (gdbscm_disasm_print_address): Remove. (gdbscm_disassembler::gdbscm_disassembler): New. (gdbscm_print_insn_from_port): Update. * mips-tdep.c: Include disasm.h. (gdb_print_insn_mips): Update code to get gdbarch. * record-btrace.c (btrace_insn_history): Update. * spu-tdep.c: Include disasm.h. (struct spu_dis_asm_data): Remove. (struct spu_dis_asm_info): New. (spu_dis_asm_print_address): Use spu_dis_asm_info to get SPU id. (gdb_print_insn_spu): Cast disassemble_info to spu_dis_asm_info.	2017-01-26 14:29:19 +00:00
Joel Brobecker	61baf725ec	update copyright year range in GDB files ... This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.	2017-01-01 10:52:34 +04:00
Yao Qi	f5ea389ac7	Change gdbarch software_single_step frame_info to regcache ... This patch changes gdbarch method software_single_step's parameter from "struct frame_info *" to "struct regcache *, IOW, software_single_step starts to use current regcache rather than current frame for software single. gdb: 2016-11-22 Yao Qi <yao.qi@linaro.org> * gdbarch.sh (software_single_step): Change parameter from frame_info to regcache. * gdbarch.c, gdbarch.h: Regenerated. * aarch64-tdep.c (aarch64_software_single_step): Change parameter from frame_info to regcache. Don't call get_current_regcache. * alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise. (alpha_software_single_step): Likewise. * alpha-tdep.h (alpha_software_single_step): Update declaration. * arm-linux-tdep.c (arm_linux_software_single_step): Likewise. * arm-tdep.c (arm_software_single_step): Likewise. * arm-tdep.h (arm_software_single_step): Likewise. * breakpoint.c (insert_single_step_breakpoint): Pass regcache to gdbarch_software_single_step. * cris-tdep.c (cris_software_single_step): Change parameter from frame_info to regcache. Don't call get_current_regcache. * mips-tdep.c (mips_software_single_step): Likewise. * mips-tdep.h (mips_software_single_step): Update declaration. * moxie-tdep.c (moxie_software_single_step): Likewise. * nios2-tdep.c (nios2_software_single_step): Likewise. * ppc-tdep.h (ppc_deal_with_atomic_sequence): Update declaration. * rs6000-aix-tdep.c (rs6000_software_single_step): Likewise. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise. * s390-linux-tdep.c (s390_software_single_step): Likewise. * sparc-tdep.c (sparc_software_single_step): Likewise. * spu-tdep.c (spu_software_single_step): Likewise. * tic6x-tdep.c (tic6x_software_single_step): Likewise.	2016-11-22 14:30:50 +00:00
Yao Qi	7113a196ba	gdbarch software_single_step frame_info to regcache: mips ... gdb: 2016-11-22 Yao Qi <yao.qi@linaro.org> * mips-tdep.c (mips32_bc1_pc): Replace parameter frame with regcache. Call regcache_raw_get_unsigned instead of get_frame_register_unsigned. (mips32_next_pc): Likewise. (micromips_bc1_pc): Likewise. (micromips_next_pc): Likewise. (extended_mips16_next_pc): Likewise. (mips16_next_pc): Likewise. (mips_next_pc): Likewise. (mips_software_single_step): Call get_regcache_arch instead of get_frame_arch.	2016-11-22 14:05:05 +00:00
Yao Qi	e8b24d9ff5	Remove parameter valaddr from la_val_print ... Nowadays, we pass both val and return value of value_contents_for_printing (val) to la_val_print. The latter is unnecessary. This patch removes the second parameter of la_val_print, and get valaddr in each language's implementation by calling value_contents_for_printing. Since value_contents_for_printing calls value_fetch_lazy, I also make VAL non-const. Note that - I don't clean up the valaddr usages in each language's routines, - I don't remove valaddr from apply_ext_lang_val_pretty_printer, and extension language ops apply_val_pretty_printer. They can be done in followup patches. gdb: 2016-11-08 Yao Qi <yao.qi@linaro.org> * ada-lang.h (ada_val_print): Remove second parameter. Remove const from "struct value *". * ada-valprint.c (print_field_values): Remove const from "struct value *". (val_print_packed_array_elements): Likewise. (print_variant_part): Likewise. (ada_val_print_string): Likewise. (ada_val_print_gnat_array): Likewise. (ada_val_print_ptr): Likewise. (ada_val_print_num): Likewise. (ada_val_print_enum): Likewise. (ada_val_print_flt): Likewise. (ada_val_print_union): Likewise. (ada_val_print_struct_union): Likewise. (ada_val_print_ref): Likewise. (ada_val_print_1): Remove second parameter. Remove const from "struct value *". (ada_val_print): Likewise. * c-lang.h (c_val_print): Likewise. * c-valprint.c (c_val_print_array): Remove const from "struct value *". (c_val_print_ptr): Likewise. (c_val_print_struct): Likewise. (c_val_print_union): Likewise. (c_val_print_int): Likewise. (c_val_print_memberptr): Likewise. (c_val_print): Remove second parameter. Remove const from "struct value *". All callers updated. * cp-valprint.c (cp_print_value): Remove const from "struct value *". (cp_print_value_fields): Likewise. (c_val_print_value): Likewise. * d-lang.h (d_val_print): Remove second parameter. Remove const from "struct value *". * d-valprint.c (dynamic_array_type): Likewise. (d_val_print): Likewise. * f-lang.h (f_val_print): Likewise. * f-valprint.c (f_val_print): Likewise. * go-lang.h (go_val_print): Likewise. * go-valprint.c (print_go_string): Likewise. (go_val_print): Likewise. * language.c (unk_lang_val_print): Likewise. * language.h (struct language_defn) <la_val_print>: Likewise. Update comments. (LA_VAL_PRINT): Remove. * m2-lang.h (m2_val_print): Remove const from "struct value *". * m2-valprint.c (m2_print_array_contents): Likewise. (m2_val_print): Likewise. * p-lang.h (pascal_val_print): Remove second parameter. Remove const from "struct value *". (pascal_object_print_value_fields): Likewise. * p-valprint.c (pascal_val_print): Likewise. (pascal_object_print_value_fields): Likewise. (pascal_object_print_value): Likewise. * rust-lang.c (rust_get_disr_info): Likewise. (val_print_struct): Likewise. (rust_val_print): Likewise. * valprint.c (generic_val_print_array): Likewise. (generic_val_print_ptr): Likewise. (generic_val_print_memberptr): Likewise. (generic_val_print_ref): Likewise. (generic_val_print_enum): Likewise. (generic_val_print_flags): Likewise. (generic_val_print_func): Likewise. (generic_val_print_bool): Likewise. (generic_val_print_int): Likewise. (generic_val_print_char): Likewise. (generic_val_print_float): Likewise. (generic_val_print_decfloat): Likewise. (generic_val_print_complex): Likewise. (generic_val_print): Likewise. (val_print): Likewise. (common_val_print): Likewise. (val_print_type_code_flags): Likewise. (val_print_scalar_formatted): Likewise. (val_print_array_elements): Likewise. * valprint.h (val_print_array_elements): Update declaration. (val_print_scalar_formatted): Likewise. (generic_val_print): Likewise. * value.h (val_print): Likewise.	2016-11-08 16:02:42 +00:00
Yao Qi	93f9a11fbd	gdbarch software_single_step returns VEC (CORE_ADDR) * ... This patch changes gdbarch method software_single_step to return a vector of addresses on which GDB should insert breakpoints, and don't insert breakpoints. Instead, the caller of gdbarch_software_single_step inserts breakpoints if the returned vector is not NULL. gdb: 2016-11-08 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_software_single_step): Return VEC (CORE_ADDR) *. Return NULL instead of 0. Don't call insert_single_step_breakpoint. * alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise. (alpha_software_single_step): Likewise. * alpha-tdep.h (alpha_software_single_step): Update declaration. * arm-linux-tdep.c (arm_linux_software_single_step): Return VEC (CORE_ADDR) *. Return NULL instead of 0. * arm-tdep.c (arm_software_single_step): Return NULL instead of 0. * arm-tdep.h (arm_software_single_step): Update declaration. * breakpoint.c (insert_single_step_breakpoints): New function. * breakpoint.h (insert_single_step_breakpoints): Declare. * cris-tdep.c (cris_software_single_step): Return VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint. * gdbarch.sh (software_single_step): Change it to return VEC (CORE_ADDR) *. * gdbarch.c, gdbarch.h: Regenerated. * infrun.c (maybe_software_singlestep): Adjust. * mips-tdep.c (mips_deal_with_atomic_sequence): Return VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint. (micromips_deal_with_atomic_sequence): Likewise. (deal_with_atomic_sequence): Likewise. (mips_software_single_step): Likewise. * mips-tdep.h (mips_software_single_step): Update declaration. * moxie-tdep.c (moxie_software_single_step): Likewise. * nios2-tdep.c (nios2_software_single_step): Likewise. * ppc-tdep.h (ppc_deal_with_atomic_sequence): Update declaration. * record-full.c (record_full_resume): Adjust. (record_full_wait_1): Likewise. * rs6000-aix-tdep.c (rs6000_software_single_step): Return VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Return VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint. * s390-linux-tdep.c (s390_software_single_step): Likewise. * sparc-tdep.c (sparc_software_single_step): Likewise. * spu-tdep.c (spu_software_single_step): Likewise. * tic6x-tdep.c (tic6x_software_single_step): Likewise.	2016-11-08 14:28:32 +00:00
Yao Qi	04180708ef	Remove GDBARCH_BREAKPOINT_MANIPULATION and SET_GDBARCH_BREAKPOINT_MANIPULATION ... Both of them are used in conversion. We can remove them since the conversion is done. There are many architectures only have one breakpoint instruction, so their gdbarch methods breakpoint_kind_from_pc and sw_breakpoint_from_kind look very similar. Instead of macro, we use template "template <size_t, const gdb_byte *> struct bp_manipulation" for these architectures. In order to use template, I also change breakpoint instruction of type "static const gdb_byte[]" to "constexpr gdb_byte[]", and rename them to ARCH_break_insn. gdb: 2016-11-03 Yao Qi <yao.qi@linaro.org> Pedro Alves <palves@redhat.com> * aarch64-tdep.c (aarch64_default_breakpoint): Change it to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (aarch64_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * alpha-tdep.c (break_insn): Rename to alpha_break_insn. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (alpha_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * arc-tdep.c (arc_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Remove. (struct bp_manipulation): New. (SET_GDBARCH_BREAKPOINT_MANIPULATION): Remove. (struct bp_manipulation_endian): New. (BP_MANIPULATION): New. (BP_MANIPULATION_ENDIAN): New. * arm-tdep.c (arm_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * avr-tdep.c (avr_break_insn): Change it constexpr. (avr_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * cris-tdep.c (cris_gdbarch_init): Likewise. * frv-tdep.c (breakpoint): Rename it to frv_break_insn, and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (frv_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * ft32-tdep.c (breakpoint): Rename it to ft32_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (ft32_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * h8300-tdep.c (breakpoint): Rename it to h8300_break_insn. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (h8300_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * hppa-tdep.c (breakpoint): Rename it to h8300_break_insn. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (hppa_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * i386-tdep.c (break_insn): Rename it to i386_break_insn. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (i386_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * iq2000-tdep.c (iq2000_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * lm32-tdep.c (breakpoint): Rename it to lm32_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (lm32_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * m32c-tdep.c (break_insn): Rename it to m32c_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (m32c_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * m68hc11-tdep.c (breakpoint): Rename it to m68hc11_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (m68hc11_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * m68k-tdep.c (break_insn): Rename it to m68k_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (m68k_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * m88k-tdep.c (break_insn): Rename it to m88k_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (m88k_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * mep-tdep.c (breakpoint): Rename it to mep_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (mep_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * microblaze-tdep.c (break_insn): Rename it to microblaze_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (microblaze_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * mips-tdep.c (mips_gdbarch_init): Likewise. * mn10300-tdep.c (breakpoint): Rename it to mn10300_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (mn10300_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * moxie-tdep.c (breakpoint): Rename it to moxie_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (moxie_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * msp430-tdep.c (breakpoint): Rename it to msp430_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (msp430_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * mt-tdep.c (mt_gdbarch_init): Likewise. * nds32-tdep.c (break_insn): Rename it to nds32_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (nds32_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * nios2-tdep.c (nios2_gdbarch_init): Likewise. * rl78-tdep.c (breakpoint): Rename it to rl78_break_ins and change its type to rl78_break_insn. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (rl78_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * rs6000-tdep.c (big_breakpoint): Change its type to constexpr. (little_breakpoint): Likewise. Don't use GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN. (rs6000_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * rx-tdep.c (breakpoint): Rename it to rx_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (rx_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * s390-linux-tdep.c (breakpoint): Rename it to s390_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION (s390_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * score-tdep.c (score_gdbarch_init): Likewise. * sh-tdep.c (sh_gdbarch_init): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * sparc-tdep.c (break_insn): Rename it to sparc_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (sparc32_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * spu-tdep.c (breakpoint): Rename it to spu_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (spu_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * tic6x-tdep.c (tic6x_gdbarch_init): Likewise. * tilegx-tdep.c (breakpoint): Rename it to tilegx_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (tilegx_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * v850-tdep.c (v850_gdbarch_init): Likewise. * vax-tdep.c (break_insn): Rename it to vax_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (vax_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * xstormy16-tdep.c (breakpoint): Rename it to xstormy16_break_insn and change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION. (xstormy16_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION. * xtensa-tdep.c (xtensa_gdbarch_init): Likewise.	2016-11-03 14:35:14 +00:00
Yao Qi	22f13eb869	Add default_breakpoint_from_pc ... This patch adds the default implementation of gdbarch breakpoint_from_pc, which is, const gdb_byte * default_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr, int *lenptr) { int kind = gdbarch_breakpoint_kind_from_pc (gdbarch, pcptr); return gdbarch_sw_breakpoint_from_kind (gdbarch, kind, lenptr); } so gdbarch can only defines sw_breakpoint_from_kind and breakpoint_kind_from_pc. gdb: 2016-11-03 Yao Qi <yao.qi@linaro.org> * arch-utils.c (default_breakpoint_from_pc): New function. * arch-utils.h (GDBARCH_BREAKPOINT_FROM_PC): Remove. (GDBARCH_BREAKPOINT_MANIPULATION): Don't use GDBARCH_BREAKPOINT_FROM_PC. (SET_GDBARCH_BREAKPOINT_MANIPULATION): Don't call set_gdbarch_breakpoint_from_pc. (default_breakpoint_from_pc): Remove declaration. * gdbarch.sh (breakpoint_from_pc): Add its default implementation. * gdbarch.c, gdbarch.h: Regenerate. * arm-tdep.c: Don't use GDBARCH_BREAKPOINT_FROM_PC. * arc-tdep.c, bfin-tdep.c, cris-tdep.c, iq2000-tdep.c: Likewise. * m32r-tdep.c, mips-tdep.c, mt-tdep.c: Likewise. * nios2-tdep.c, score-tdep.c, sh-tdep.c: Likewise. * sh64-tdep.c, tic6x-tdep.c, v850-tdep.c, xtensa-tdep.c: Likewise.	2016-11-03 14:35:14 +00:00