mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-07 01:04:17 +08:00
8f0435f75e
421 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Andreas Arnez
|
8f0435f75e |
Add 'regset' parameter to 'iterate_over_regset_sections_cb'
This adds the 'regset' parameter to the iterator callback. Consequently the 'regset_from_core_section' method is dropped for all targets that provide the iterator method. This change prepares for replacing regset_from_core_section everywhere, thereby eliminating one gdbarch interface. Since the iterator is usually no more complex than regset_from_core_section alone, targets that previously didn't define core_regset_sections will then gain multi-arch capable core file generation support without increased complexity. gdb/ChangeLog: * gdbarch.sh (iterate_over_regset_sections_cb): Add regset parameter. * gdbarch.h: Regenerate. * corelow.c (sniff_core_bfd): Don't sniff if gdbarch has a regset iterator. (get_core_register_section): Add parameter 'regset' and use it, if set. Add parameter 'min_size' and verify the bfd section size against it. (get_core_registers_cb): Add parameter 'regset' and pass it to get_core_register section. For the "standard" register sections ".reg" and ".reg2", set an appropriate default for human_name. (get_core_registers): Don't abort when the gdbarch has an iterator but no regset_from_core_section. Add NULL/0 for parameters 'regset'/'min_size' in calls to get_core_register_section. * linux-tdep.c (linux_collect_regset_section_cb): Add parameter 'regset' and use it instead of calling the regset_from_core_section gdbarch method. * i386-tdep.h (struct gdbarch_tdep): Add field 'fpregset'. * i386-tdep.c (i386_supply_xstateregset) (i386_collect_xstateregset, i386_xstateregset): Moved to i386-linux-tdep.c. (i386_regset_from_core_section): Drop handling for .reg-xfp and .reg-xstate. (i386_gdbarch_init): Set tdep field 'fpregset'. Enable generic core file support only if the regset iterator hasn't been set. * i386-linux-tdep.c (i386_linux_supply_xstateregset) (i386_linux_collect_xstateregset, i386_linux_xstateregset): New. Moved from i386-tdep.c and renamed to *_linux*. (i386_linux_iterate_over_regset_sections): Add regset parameter to each callback invocation. Allow any .reg-xstate size when reading from a core file. * amd64-tdep.c (amd64_supply_xstateregset) (amd64_collect_xstateregset, amd64_xstateregset): Moved to amd64-linux-tdep.c. (amd64_regset_from_core_section): Remove. (amd64_init_abi): Set new tdep field 'fpregset'. No longer install an amd64-specific regset_from_core_section gdbarch method. * amd64-linux-tdep.c (amd64_linux_supply_xstateregset) (amd64_linux_collect_xstateregset, amd64_linux_xstateregset): New. Moved from amd64-tdep.c and renamed to *_linux*. (amd64_linux_iterate_over_regset_sections): Add regset parameter to each callback invocation. Allow any .reg-xstate size when reading from a core file. * arm-linux-tdep.c (arm_linux_regset_from_core_section): Remove. (arm_linux_iterate_over_regset_sections): Add regset parameter to each callback invocation. (arm_linux_init_abi): No longer set the regset_from_core_section gdbarch method. * ppc-linux-tdep.c (ppc_linux_regset_from_core_section): Remove. (ppc_linux_iterate_over_regset_sections): Add regset parameter to each callback invocation. (ppc_linux_init_abi): No longer set the regset_from_core_section gdbarch method. * s390-linux-tdep.c (struct gdbarch_tdep): Remove the fields gregset, sizeof_gregset, fpregset, and sizeof_fpregset. (s390_regset_from_core_section): Remove. (s390_iterate_over_regset_sections): Add regset parameter to each callback invocation. (s390_gdbarch_init): No longer set the regset_from_core_section gdbarch method. Drop initialization of deleted tdep fields. |
||
Gary Benson
|
df7e526582 |
Rename 32- and 64-bit Intel files from "i386" to "x86"
This commit renames nine files that contain code used by both 32- and 64-bit Intel ports such that their names are prefixed with "x86" rather than "i386". All types, functions and variables within these files are likewise renamed such that their names are prefixed with "x86" rather than "i386". This makes GDB follow the convention used by gdbserver such that 32-bit Intel code lives in files called "i386-*", 64-bit Intel code lives in files called "amd64-*", and code for both 32- and 64-bit Intel lives in files called "x86-*". This commit only renames OS-independent files. The Linux ports of both GDB and gdbserver now follow the i386/amd64/x86 convention fully. Some ports still use the old convention where "i386" in file/function/ type/variable names can mean "32-bit only" or "32- and 64-bit" but I don't want to touch ports I can't fully test except where absolutely necessary. gdb/ChangeLog: * i386-nat.h: Renamed as... * x86-nat.h: New file. All type, function and variable name prefixes changed from "i386_" to "x86_". All references updated. * i386-nat.c: Renamed as... * x86-nat.c: New file. All type, function and variable name prefixes changed from "i386_" to "x86_". All references updated. * common/i386-xstate.h: Renamed as... * common/x86-xstate.h: New file. All type, function and variable name prefixes changed from "i386_" to "x86_". All references updated. * nat/i386-cpuid.h: Renamed as... * nat/x86-cpuid.h: New file. All type, function and variable name prefixes changed from "i386_" to "x86_". All references updated. * nat/i386-gcc-cpuid.h: Renamed as... * nat/x86-gcc-cpuid.h: New file. All type, function and variable name prefixes changed from "i386_" to "x86_". All references updated. * nat/i386-dregs.h: Renamed as... * nat/x86-dregs.h: New file. All type, function and variable name prefixes changed from "i386_" to "x86_". All references updated. * nat/i386-dregs.c: Renamed as... * nat/x86-dregs.c: New file. All type, function and variable name prefixes changed from "i386_" to "x86_". All references updated. gdb/gdbserver/ChangeLog: * i386-low.h: Renamed as... * x86-low.h: New file. All type, function and variable name prefixes changed from "i386_" to "x86_". All references updated. * i386-low.c: Renamed as... * x86-low.c: New file. All type, function and variable name prefixes changed from "i386_" to "x86_". All references updated. |
||
Gary Benson
|
6d3d12ebef |
Include string.h in common-defs.h
This commit includes string.h in common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include string.h. * aarch64-tdep.c: Do not include string.h. * ada-exp.y: Likewise. * ada-lang.c: Likewise. * ada-lex.l: Likewise. * ada-typeprint.c: Likewise. * ada-valprint.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alpha-nat.c: Likewise. * alpha-osf1-tdep.c: Likewise. * alpha-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-dicos-tdep.c: Likewise. * amd64-linux-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-sol2-tdep.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-linux-nat.c: Likewise. * arm-linux-tdep.c: Likewise. * arm-tdep.c: Likewise. * arm-wince-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * armnbsd-nat.c: Likewise. * armnbsd-tdep.c: Likewise. * armobsd-tdep.c: Likewise. * avr-tdep.c: Likewise. * ax-gdb.c: Likewise. * ax-general.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * breakpoint.c: Likewise. * build-id.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * c-typeprint.c: Likewise. * c-valprint.c: Likewise. * charset.c: Likewise. * cli-out.c: Likewise. * cli/cli-cmds.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-interp.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-setshow.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/agent.c: Likewise. * common/buffer.c: Likewise. * common/buffer.h: Likewise. * common/common-utils.c: Likewise. * common/filestuff.c: Likewise. * common/filestuff.c: Likewise. * common/format.c: Likewise. * common/print-utils.c: Likewise. * common/rsp-low.c: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * common/xml-utils.c: Likewise. * core-regset.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-support.c: Likewise. * cp-valprint.c: Likewise. * cris-tdep.c: Likewise. * d-exp.y: Likewise. * darwin-nat.c: Likewise. * dbxread.c: Likewise. * dcache.c: Likewise. * demangle.c: Likewise. * dicos-tdep.c: Likewise. * disasm.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * elfread.c: Likewise. * environ.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * exec.c: Likewise. * expprint.c: Likewise. * f-exp.y: Likewise. * f-lang.c: Likewise. * f-typeprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findcmd.c: Likewise. * findvar.c: Likewise. * fork-child.c: Likewise. * frame.c: Likewise. * frv-linux-tdep.c: Likewise. * frv-tdep.c: Likewise. * gdb.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v2-abi.c: Likewise. * gnu-v3-abi.c: Likewise. * go-exp.y: Likewise. * go-lang.c: Likewise. * go32-nat.c: Likewise. * guile/guile.c: Likewise. * guile/scm-auto-load.c: Likewise. * hppa-hpux-tdep.c: Likewise. * hppa-linux-nat.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-cygwin-tdep.c: Likewise. * i386-dicos-tdep.c: Likewise. * i386-linux-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-sol2-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-linux-nat.c: Likewise. * inf-child.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * inflow.c: Likewise. * infrun.c: Likewise. * interps.c: Likewise. * iq2000-tdep.c: Likewise. * irix5-nat.c: Likewise. * jv-exp.y: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * jv-valprint.c: Likewise. * language.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * lm32-tdep.c: Likewise. * m2-exp.y: Likewise. * m2-typeprint.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-linux-tdep.c: Likewise. * m32r-rom.c: Likewise. * m32r-tdep.c: Likewise. * m68hc11-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-tdep.c: Likewise. * m68klinux-nat.c: Likewise. * m68klinux-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macrocmd.c: Likewise. * main.c: Likewise. * mdebugread.c: Likewise. * mem-break.c: Likewise. * memattr.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-cmd-break.c: Likewise. * mi/mi-cmd-disas.c: Likewise. * mi/mi-cmd-env.c: Likewise. * mi/mi-cmd-stack.c: Likewise. * mi/mi-cmd-var.c: Likewise. * mi/mi-cmds.c: Likewise. * mi/mi-console.c: Likewise. * mi/mi-getopt.c: Likewise. * mi/mi-interp.c: Likewise. * mi/mi-main.c: Likewise. * mi/mi-parse.c: Likewise. * microblaze-rom.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * minidebug.c: Likewise. * minsyms.c: Likewise. * mips-irix-tdep.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mipsread.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * monitor.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-procfs.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/linux-waitpid.c: Likewise. * nbsd-tdep.c: Likewise. * nios2-linux-tdep.c: Likewise. * nto-procfs.c: Likewise. * nto-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * osdata.c: Likewise. * p-exp.y: Likewise. * p-lang.c: Likewise. * p-typeprint.c: Likewise. * parse.c: Likewise. * posix-hdep.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * python/py-auto-load.c: Likewise. * python/py-gdb-readline.c: Likewise. * ravenscar-thread.c: Likewise. * regcache.c: Likewise. * registry.c: Likewise. * remote-fileio.c: Likewise. * remote-m32r-sdi.c: Likewise. * remote-mips.c: Likewise. * remote-notif.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * reverse.c: Likewise. * rs6000-aix-tdep.c: Likewise. * ser-base.c: Likewise. * ser-go32.c: Likewise. * ser-mingw.c: Likewise. * ser-pipe.c: Likewise. * ser-tcp.c: Likewise. * ser-unix.c: Likewise. * serial.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * shnbsd-tdep.c: Likewise. * skip.c: Likewise. * sol-thread.c: Likewise. * solib-dsbt.c: Likewise. * solib-frv.c: Likewise. * solib-osf.c: Likewise. * solib-som.c: Likewise. * solib-spu.c: Likewise. * solib-target.c: Likewise. * solib.c: Likewise. * somread.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * spu-linux-nat.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * std-regs.c: Likewise. * symfile.c: Likewise. * symmisc.c: Likewise. * symtab.c: Likewise. * target.c: Likewise. * thread.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tracepoint.c: Likewise. * tui/tui-command.c: Likewise. * tui/tui-data.c: Likewise. * tui/tui-disasm.c: Likewise. * tui/tui-file.c: Likewise. * tui/tui-layout.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-regs.c: Likewise. * tui/tui-source.c: Likewise. * tui/tui-stack.c: Likewise. * tui/tui-win.c: Likewise. * tui/tui-windata.c: Likewise. * tui/tui-winsource.c: Likewise. * typeprint.c: Likewise. * ui-file.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valarith.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-tdep.c: Likewise. * vaxnbsd-tdep.c: Likewise. * vaxobsd-tdep.c: Likewise. * windows-nat.c: Likewise. * xcoffread.c: Likewise. * xml-support.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include string.h. * event-loop.c: Likewise. * linux-low.c: Likewise. * regcache.c: Likewise. * remote-utils.c: Likewise. * spu-low.c: Likewise. * utils.c: Likewise. |
||
Gary Benson
|
dccbb60975 |
Include gdb_assert.h in common-defs.h
This commit includes gdb_assert.h in common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include gdb_assert.h. * aarch64-tdep.c: Do not include gdb_assert.h. * addrmap.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-tdep.c: Likewise. * amd64bsd-nat.c: Likewise. * amd64fbsd-nat.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64nbsd-nat.c: Likewise. * amd64nbsd-tdep.c: Likewise. * amd64obsd-nat.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * auxv.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * blockframe.c: Likewise. * breakpoint.c: Likewise. * bsd-kvm.c: Likewise. * bsd-uthread.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * charset.c: Likewise. * cleanups.c: Likewise. * cli-out.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/common-utils.c: Likewise. * common/queue.h: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * complaints.c: Likewise. * completer.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-namespace.c: Likewise. * cp-support.c: Likewise. * cris-tdep.c: Likewise. * dbxread.c: Likewise. * dictionary.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame-tailcall.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2expr.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * expprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findvar.c: Likewise. * frame-unwind.c: Likewise. * frame.c: Likewise. * frv-tdep.c: Likewise. * gcore.c: Likewise. * gdb-dlfcn.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v3-abi.c: Likewise. * go-lang.c: Likewise. * guile/scm-exception.c: Likewise. * guile/scm-gsmob.c: Likewise. * guile/scm-lazy-string.c: Likewise. * guile/scm-math.c: Likewise. * guile/scm-pretty-print.c: Likewise. * guile/scm-safe-call.c: Likewise. * guile/scm-utils.c: Likewise. * guile/scm-value.c: Likewise. * h8300-tdep.c: Likewise. * hppa-hpux-nat.c: Likewise. * hppa-tdep.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-darwin-nat.c: Likewise. * i386-darwin-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-nat.c: Likewise. * i386fbsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-tdep.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * infrun.c: Likewise. * inline-frame.c: Likewise. * interps.c: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * linux-thread-db.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-nat.c: Likewise. * m68kbsd-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macroexp.c: Likewise. * macrotab.c: Likewise. * maint.c: Likewise. * mdebugread.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-common.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * mips-linux-nat.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/mips-linux-watch.c: Likewise. * nios2-linux-tdep.c: Likewise. * nios2-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * obsd-nat.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * parse.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-nat.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-nat.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-nat.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * psymtab.c: Likewise. * python/py-lazy-string.c: Likewise. * python/py-value.c: Likewise. * regcache.c: Likewise. * reggroups.c: Likewise. * registry.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * rs6000-aix-tdep.c: Likewise. * rs6000-tdep.c: Likewise. * s390-linux-tdep.c: Likewise. * score-tdep.c: Likewise. * ser-base.c: Likewise. * ser-mingw.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * solib-darwin.c: Likewise. * solib-spu.c: Likewise. * solib-svr4.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-sol2-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparc64obsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * sparcobsd-tdep.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * symfile.c: Likewise. * symtab.c: Likewise. * target-descriptions.c: Likewise. * target-memory.c: Likewise. * target.c: Likewise. * tic6x-linux-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tramp-frame.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-winsource.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valops.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-nat.c: Likewise. * xml-syscall.c: Likewise. * xml-tdesc.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. * xtensa-tdep.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include gdb_assert.h. |
||
Pedro Alves
|
45741a9c32 |
Add new infrun.h header.
Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h. |
||
Andreas Arnez
|
ecc37a5acc |
X86: Replace regset_alloc() invocations by static regset structures.
After removal of the regset_alloc invocations, the appropriate tdep fields become obsolete and are thus removed. |
||
Andreas Arnez
|
09424cff8c |
Remove 'arch' field from regset structure.
Removes the 'arch' field from the regset structure, since it represents the only "dynamic" data in a regset. It was referenced in some regset supply- and collect routines, to get access to the gdbarch associated with the regset. Naturally, the affected routines always have access to the regcache to be supplied to or collected from. Thus the gdbarch associated with that regcache can be used instead. |
||
Michael Sturm
|
01f9f808e2 |
Add AVX512 registers support to GDB and GDBserver.
This patch adds support for the Intel(R) Advanced Vector Extensions 512 (Intel(R) AVX-512) registers. Native and remote debugging are covered by this patch. Intel(R) AVX-512 is an extension to AVX to support 512-bit wide SIMD registers in 64-bit mode (XMM0-XMM31, YMM0-YMM31, ZMM0-ZMM31). The number of available registers in 32-bit mode is still 8 (XMM0-7, YMM0-7, ZMM0-7). The lower 256-bits of the ZMM registers are aliased to the respective 256-bit YMM registers. The lower 128-bits are aliased to the respective 128-bit XMM registers. There are also 8 new, dedicated mask registers (K0-K7) in both 32-bit mode and 64-bit mode. For more information please see Intel(R) Developer Zone: Intel(R) AVX http://software.intel.com/en-us/intel-isa-extensions#pid-16007-1495 Intel(R) Architecture Instruction Set Extensions Programming Reference: http://software.intel.com/en-us/file/319433-017pdf 2014-04-24 Michael Sturm <michael.sturm@mintel.com> Walfred Tedeschi <walfred.tedeschi@intel.com> * amd64-linux-nat.c (amd64_linux_gregset32_reg_offset): Add AVX512 registers. (amd64_linux_read_description): Add code to handle AVX512 xstate mask and return respective tdesc. * amd64-linux-tdep.c: Include features/i386/amd64-avx512-linux.c and features/i386/x32-avx512-linux.c. (amd64_linux_gregset_reg_offset): Add AVX512 registers. (amd64_linux_core_read_description): Add code to handle AVX512 xstate mask and return respective tdesc. (_initialize_amd64_linux_tdep): Initialize AVX512 tdesc. * amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Adjust regnum calculation. (AMD64_LINUX_NUM_REGS): Adjust to new number of registers. (tdesc_amd64_avx512_linux): New prototype. (tdesc_x32_avx512_linux): Likewise. * amd64-tdep.c: Include features/i386/amd64-avx512.c and features/i386/x32-avx512.c. (amd64_ymm_avx512_names): New register names for pseudo registers YMM16-31. (amd64_ymmh_avx512_names): New register names for raw registers YMMH16-31. (amd64_k_names): New register names for K registers. (amd64_zmmh_names): New register names for ZMM raw registers. (amd64_zmm_names): New registers names for ZMM pseudo registers. (amd64_xmm_avx512_names): New register names for XMM16-31 registers. (amd64_pseudo_register_name): Add code to return AVX512 pseudo registers. (amd64_init_abi): Add code to intitialize AVX512 tdep variables if feature is present. (_initialize_amd64_tdep): Call AVX512 tdesc initializers. * amd64-tdep.h (enum amd64_regnum): Add AVX512 registers. (AMD64_NUM_REGS): Adjust to new number of registers. * i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Extend range of registers supplied via XSTATE by AVX512 registers. (i386_linux_read_description): Add case for AVX512. * i386-linux-tdep.c: Include i386-avx512-linux.c. (i386_linux_gregset_reg_offset): Add AVX512 registers. (i386_linux_core_read_description): Add case for AVX512. (i386_linux_init_abi): Install supported register note section for AVX512. (_initialize_i386_linux_tdep): Add call to tdesc init function for AVX512. * i386-linux-tdep.h (I386_LINUX_NUM_REGS): Set number of registers to be number of zmm7h + 1. (tdesc_i386_avx512_linux): Add tdesc for AVX512 registers. * i386-tdep.c: Include features/i386/i386-avx512.c. (i386_zmm_names): Add ZMM pseudo register names array. (i386_zmmh_names): Add ZMM raw register names array. (i386_k_names): Add K raw register names array. (num_lower_zmm_regs): Add constant for the number of lower ZMM registers. AVX512 has 16 more ZMM registers than there are YMM registers. (i386_zmmh_regnum_p): Add function to look up register number of ZMM raw registers. (i386_zmm_regnum_p): Likewise for ZMM pseudo registers. (i386_k_regnum_p): Likewise for K raw registers. (i386_ymmh_avx512_regnum_p): Likewise for additional YMM raw registers added by AVX512. (i386_ymm_avx512_regnum_p): Likewise for additional YMM pseudo registers added by AVX512. (i386_xmm_avx512_regnum_p): Likewise for additional XMM registers added by AVX512. (i386_register_name): Add code to hide YMMH16-31 and ZMMH0-31. (i386_pseudo_register_name): Add ZMM pseudo registers. (i386_zmm_type): Construct and return vector registers type for ZMM registers. (i386_pseudo_register_type): Return appropriate type for YMM16-31, ZMM0-31 pseudo registers and K registers. (i386_pseudo_register_read_into_value): Add code to read K, ZMM and YMM16-31 registers from register cache. (i386_pseudo_register_write): Add code to write K, ZMM and YMM16-31 registers. (i386_register_reggroup_p): Add code to include/exclude AVX512 registers in/from respective register groups. (i386_validate_tdesc_p): Handle AVX512 feature, add AVX512 registers if feature is present in xcr0. (i386_gdbarch_init): Add code to initialize AVX512 feature variables in tdep structure, wire in pseudo registers and call initialize_tdesc_i386_avx512. * i386-tdep.h (struct gdbarch_tdep): Add AVX512 related variables. (i386_regnum): Add AVX512 registers. (I386_SSE_NUM_REGS): New define for number of SSE registers. (I386_AVX_NUM_REGS): Likewise for AVX registers. (I386_AVX512_NUM_REGS): Likewise for AVX512 registers. (I386_MAX_REGISTER_SIZE): Change to 64 bytes, ZMM registers are 512 bits wide. (i386_xmm_avx512_regnum_p): New prototype for register look up. (i386_ymm_avx512_regnum_p): Likewise. (i386_k_regnum_p): Likewise. (i386_zmm_regnum_p): Likewise. (i386_zmmh_regnum_p): Likewise. * i387-tdep.c : Update year in copyright notice. (xsave_ymm_avx512_offset): New table for YMM16-31 offsets in XSAVE buffer. (XSAVE_YMM_AVX512_ADDR): New macro. (xsave_xmm_avx512_offset): New table for XMM16-31 offsets in XSAVE buffer. (XSAVE_XMM_AVX512_ADDR): New macro. (xsave_avx512_k_offset): New table for K register offsets in XSAVE buffer. (XSAVE_AVX512_K_ADDR): New macro. (xsave_avx512_zmm_h_offset): New table for ZMM register offsets in XSAVE buffer. (XSAVE_AVX512_ZMM_H_ADDR): New macro. (i387_supply_xsave): Add code to supply AVX512 registers to XSAVE buffer. (i387_collect_xsave): Add code to collect AVX512 registers from XSAVE buffer. * i387-tdep.h (I387_NUM_XMM_AVX512_REGS): New define for number of XMM16-31 registers. (I387_NUM_K_REGS): New define for number of K registers. (I387_K0_REGNUM): New define for K0 register number. (I387_NUM_ZMMH_REGS): New define for number of ZMMH registers. (I387_ZMM0H_REGNUM): New define for ZMM0H register number. (I387_NUM_YMM_AVX512_REGS): New define for number of YMM16-31 registers. (I387_YMM16H_REGNUM): New define for YMM16H register number. (I387_XMM16_REGNUM): New define for XMM16 register number. (I387_YMM0_REGNUM): New define for YMM0 register number. (I387_KEND_REGNUM): New define for last K register number. (I387_ZMMENDH_REGNUM): New define for last ZMMH register number. (I387_YMMH_AVX512_END_REGNUM): New define for YMM31 register number. (I387_XMM_AVX512_END_REGNUM): New define for XMM31 register number. * common/i386-xstate.h: Add AVX 3.1 feature bits, mask and XSTATE size. * features/Makefile: Add AVX512 related files. * features/i386/32bit-avx512.xml: New file. * features/i386/64bit-avx512.xml: Likewise. * features/i386/amd64-avx512-linux.c: Likewise. * features/i386/amd64-avx512-linux.xml: Likewise. * features/i386/amd64-avx512.c: Likewise. * features/i386/amd64-avx512.xml: Likewise. * features/i386/i386-avx512-linux.c: Likewise. * features/i386/i386-avx512-linux.xml: Likewise. * features/i386/i386-avx512.c: Likewise. * features/i386/i386-avx512.xml: Likewise. * features/i386/x32-avx512-linux.c: Likewise. * features/i386/x32-avx512-linux.xml: Likewise. * features/i386/x32-avx512.c: Likewise. * features/i386/x32-avx512.xml: Likewise. * regformats/i386/amd64-avx512-linux.dat: New file. * regformats/i386/amd64-avx512.dat: Likewise. * regformats/i386/i386-avx512-linux.dat: Likewise. * regformats/i386/i386-avx512.dat: Likewise. * regformats/i386/x32-avx512-linux.dat: Likewise. * regformats/i386/x32-avx512.dat: Likewise. * NEWS: Add note about new support for AVX512. testsuite/ * Makefile.in (EXECUTABLES): Added i386-avx512. * gdb.arch/i386-avx512.c: New file. * gdb.arch/i386-avx512.exp: Likewise. gdbserver/ * Makefile.in: Added rules to handle new files i386-avx512.c i386-avx512-linux.c amd64-avx512.c amd64-avx512-linux.c x32-avx512.c x32-avx512-linux.c. * configure.srv (srv_i386_regobj): Add i386-avx512.o. (srv_i386_linux_regobj): Add i386-avx512-linux.o. (srv_amd64_regobj): Add amd64-avx512.o and x32-avx512.o. (srv_amd64_linux_regobj): Add amd64-avx512-linux.o and x32-avx512-linux.o. (srv_i386_32bit_xmlfiles): Add i386/32bit-avx512.xml. (srv_i386_64bit_xmlfiles): Add i386/64bit-avx512.xml. (srv_amd64_xmlfiles): Add i386/amd64-avx512.xml and i386/x32-avx512.xml. (srv_i386_linux_xmlfiles): Add i386/i386-avx512-linux.xml. (srv_amd64_linux_xmlfiles): Add i386/amd64-avx512-linux.xml and i386/x32-avx512-linux.xml. * i387-fp.c (num_avx512_k_registers): New constant for number of K registers. (num_avx512_zmmh_low_registers): New constant for number of lower ZMM registers (0-15). (num_avx512_zmmh_high_registers): New constant for number of higher ZMM registers (16-31). (num_avx512_ymmh_registers): New contant for number of higher YMM registers (ymm16-31 added by avx521 on x86_64). (num_avx512_xmm_registers): New constant for number of higher XMM registers (xmm16-31 added by AVX512 on x86_64). (struct i387_xsave): Add space for AVX512 registers. (i387_cache_to_xsave): Change raw buffer size to 64 characters. Add code to handle AVX512 registers. (i387_xsave_to_cache): Add code to handle AVX512 registers. * linux-x86-low.c (init_registers_amd64_avx512_linux): New prototypei from generated file. (tdesc_amd64_avx512_linux): Likewise. (init_registers_x32_avx512_linux): Likewise. (tdesc_x32_avx512_linux): Likewise. (init_registers_i386_avx512_linux): Likewise. (tdesc_i386_avx512_linux): Likewise. (x86_64_regmap): Add AVX512 registers. (x86_linux_read_description): Add code to handle AVX512 XSTATE mask. (initialize_low_arch): Add code to initialize AVX512 registers. doc/ * gdb.texinfo (i386 Features): Add description of AVX512 registers. Change-Id: Ifc4c08c76b85dbec18d02efdbe6182e851584438 Signed-off-by: Michael Sturm <michael.sturm@intel.com> |
||
Sergio Durigan Junior
|
410a0ff2df |
Remove `expout*' globals from parser-defs.h
This commit removes the "expout*" globals from our parser code, turning them into a structure that is passed when an expression needs to be evaluated. This is the initial step to make our parser less "globalized". This is mostly a mechanical patch, which creates a structure containing the "expout*" globals and then modify all the functions that handle them in order to take the structure as argument. It is big, and has been reviewed at least 4 times, so I think everything is covered. Below you can see the message links from the discussions: - First attempt: <https://sourceware.org/ml/gdb-patches/2012-01/msg00522.html> Message-ID: <m3k44s7qej.fsf@gmail.com> - Second attempt: <https://sourceware.org/ml/gdb-patches/2012-06/msg00054.html> Message-Id: <1338665528-5932-1-git-send-email-sergiodj@redhat.com> - Third attempt: <https://sourceware.org/ml/gdb-patches/2014-01/msg00949.html> Message-Id: <1390629467-27139-1-git-send-email-sergiodj@redhat.com> - Fourth (last) attempt: <https://sourceware.org/ml/gdb-patches/2014-03/msg00546.html> Message-Id: <1395463432-29750-1-git-send-email-sergiodj@redhat.com> gdb/ 2014-03-27 Sergio Durigan Junior <sergiodj@redhat.com> Remove some globals from our parser. * language.c (unk_lang_parser): Add "struct parser_state" argument. * language.h (struct language_defn) <la_parser>: Likewise. * parse.c (expout, expout_size, expout_ptr): Remove variables. (initialize_expout): Add "struct parser_state" argument. Rewrite function to use the parser state. (reallocate_expout, write_exp_elt, write_exp_elt_opcode, write_exp_elt_sym, write_exp_elt_block, write_exp_elt_objfile, write_exp_elt_longcst, write_exp_elt_dblcst, write_exp_elt_decfloatcst, write_exp_elt_type, write_exp_elt_intern, write_exp_string, write_exp_string_vector, write_exp_bitstring, write_exp_msymbol, mark_struct_expression, write_dollar_variable): Likewise. (parse_exp_in_context_1): Use parser state. (insert_type_address_space): Add "struct parser_state" argument. Use parser state. (increase_expout_size): New function. * parser-defs.h: Forward declare "struct language_defn" and "struct parser_state". (expout, expout_size, expout_ptr): Remove extern declarations. (parse_gdbarch, parse_language): Rewrite macro declarations to accept the parser state. (struct parser_state): New struct. (initialize_expout, reallocate_expout, write_exp_elt_opcode, write_exp_elt_sym, write_exp_elt_longcst, write_exp_elt_dblcst, write_exp_elt_decfloatcst, write_exp_elt_type, write_exp_elt_intern, write_exp_string, write_exp_string_vector, write_exp_bitstring, write_exp_elt_block, write_exp_elt_objfile, write_exp_msymbol, write_dollar_variable, mark_struct_expression, insert_type_address_space): Add "struct parser_state" argument. (increase_expout_size): New function. * utils.c (do_clear_parser_state): New function. (make_cleanup_clear_parser_state): Likewise. * utils.h (make_cleanup_clear_parser_state): New function prototype. * aarch64-linux-tdep.c (aarch64_stap_parse_special_token): Update calls to write_exp* in order to pass the parser state. * arm-linux-tdep.c (arm_stap_parse_special_token): Likewise. * i386-tdep.c (i386_stap_parse_special_token_triplet): Likewise. (i386_stap_parse_special_token_three_arg_disp): Likewise. * ppc-linux-tdep.c (ppc_stap_parse_special_token): Likewise. * stap-probe.c (stap_parse_register_operand): Likewise. (stap_parse_single_operand): Likewise. (stap_parse_argument_1): Likewise. (stap_parse_argument): Use parser state. * stap-probe.h: Include "parser-defs.h". (struct stap_parse_info) <pstate>: New field. * c-exp.y (parse_type): Rewrite to use parser state. (yyparse): Redefine to c_parse_internal. (pstate): New global variable. (parse_number): Add "struct parser_state" argument. (write_destructor_name): Likewise. (type_exp): Update calls to write_exp* and similars in order to use parser state. (exp1, exp, variable, qualified_name, space_identifier, typename, typebase): Likewise. (write_destructor_name, parse_number, lex_one_token, classify_name, classify_inner_name, c_parse): Add "struct parser_state" argument. Update function to use parser state. * c-lang.h: Forward declare "struct parser_state". (c_parse): Add "struct parser_state" argument. * ada-exp.y (parse_type): Rewrite macro to use parser state. (yyparse): Redefine macro to ada_parse_internal. (pstate): New variable. (write_int, write_object_renaming, write_var_or_type, write_name_assoc, write_exp_op_with_string, write_ambiguous_var, type_int, type_long, type_long_long, type_float, type_double, type_long_double, type_char, type_boolean, type_system_address): Add "struct parser_state" argument. (exp1, primary, simple_exp, relation, and_exp, and_then_exp, or_exp, or_else_exp, xor_exp, type_prefix, opt_type_prefix, var_or_type, aggregate, aggregate_component_list, positional_list, others, component_group, component_associations): Update calls to write_exp* and similar functions in order to use parser state. (ada_parse, write_var_from_sym, write_int, write_exp_op_with_string, write_object_renaming, find_primitive_type, write_selectors, write_ambiguous_var, write_var_or_type, write_name_assoc, type_int, type_long, type_long_long, type_float, type_double, type_long_double, type_char, type_boolean, type_system_address): Add "struct parser_state" argument. Adjust function to use parser state. * ada-lang.c (parse): Likewise. * ada-lang.h: Forward declare "struct parser_state". (ada_parse): Add "struct parser_state" argument. * ada-lex.l (processInt, processReal): Likewise. Adjust all calls to both functions. * f-exp.y (parse_type, parse_f_type): Rewrite macros to use parser state. (yyparse): Redefine macro to f_parse_internal. (pstate): New variable. (parse_number): Add "struct parser_state" argument. (type_exp, exp, subrange, typebase): Update calls to write_exp* and similars in order to use parser state. (parse_number): Adjust code to use parser state. (yylex): Likewise. (f_parse): New function. * f-lang.h: Forward declare "struct parser_state". (f_parse): Add "struct parser_state" argument. * jv-exp.y (parse_type, parse_java_type): Rewrite macros to use parser state. (yyparse): Redefine macro for java_parse_internal. (pstate): New variable. (push_expression_name, push_expression_name, insert_exp): Add "struct parser_state" argument. (type_exp, StringLiteral, Literal, PrimitiveType, IntegralType, FloatingPointType, exp1, PrimaryNoNewArray, FieldAccess, FuncStart, MethodInvocation, ArrayAccess, PostfixExpression, PostIncrementExpression, PostDecrementExpression, UnaryExpression, PreIncrementExpression, PreDecrementExpression, UnaryExpressionNotPlusMinus, CastExpression, MultiplicativeExpression, AdditiveExpression, ShiftExpression, RelationalExpression, EqualityExpression, AndExpression, ExclusiveOrExpression, InclusiveOrExpression, ConditionalAndExpression, ConditionalOrExpression, ConditionalExpression, Assignment, LeftHandSide): Update calls to write_exp* and similars in order to use parser state. (parse_number): Ajust code to use parser state. (yylex): Likewise. (java_parse): New function. (push_variable): Add "struct parser_state" argument. Adjust code to user parser state. (push_fieldnames, push_qualified_expression_name, push_expression_name, insert_exp): Likewise. * jv-lang.h: Forward declare "struct parser_state". (java_parse): Add "struct parser_state" argument. * m2-exp.y (parse_type, parse_m2_type): Rewrite macros to use parser state. (yyparse): Redefine macro to m2_parse_internal. (pstate): New variable. (type_exp, exp, fblock, variable, type): Update calls to write_exp* and similars to use parser state. (yylex): Likewise. (m2_parse): New function. * m2-lang.h: Forward declare "struct parser_state". (m2_parse): Add "struct parser_state" argument. * objc-lang.c (end_msglist): Add "struct parser_state" argument. * objc-lang.h: Forward declare "struct parser_state". (end_msglist): Add "struct parser_state" argument. * p-exp.y (parse_type): Rewrite macro to use parser state. (yyparse): Redefine macro to pascal_parse_internal. (pstate): New variable. (parse_number): Add "struct parser_state" argument. (type_exp, exp1, exp, qualified_name, variable): Update calls to write_exp* and similars in order to use parser state. (parse_number, yylex): Adjust code to use parser state. (pascal_parse): New function. * p-lang.h: Forward declare "struct parser_state". (pascal_parse): Add "struct parser_state" argument. * go-exp.y (parse_type): Rewrite macro to use parser state. (yyparse): Redefine macro to go_parse_internal. (pstate): New variable. (parse_number): Add "struct parser_state" argument. (type_exp, exp1, exp, variable, type): Update calls to write_exp* and similars in order to use parser state. (parse_number, lex_one_token, classify_name, yylex): Adjust code to use parser state. (go_parse): Likewise. * go-lang.h: Forward declare "struct parser_state". (go_parse): Add "struct parser_state" argument. |
||
Tom Tromey
|
efd66ac669 |
change minsym representation
In a later patch we're going to change the minimal symbol address calculation to apply section offsets at the point of use. To make it simpler to catch potential problem spots, this patch changes the representation of minimal symbols and introduces new minimal-symbol-specific variants of the various accessors. This is necessary because it would be excessively ambitious to try to convert all the symbol types at once. The core of this change is just renaming a field in minimal_symbol; the rest is just a fairly mechanical rewording. 2014-02-26 Tom Tromey <tromey@redhat.com> * symtab.h (struct minimal_symbol) <mginfo>: Rename from ginfo. (MSYMBOL_VALUE, MSYMBOL_VALUE_ADDRESS, MSYMBOL_VALUE_BYTES) (MSYMBOL_BLOCK_VALUE, MSYMBOL_VALUE_CHAIN, MSYMBOL_LANGUAGE) (MSYMBOL_SECTION, MSYMBOL_OBJ_SECTION, MSYMBOL_NATURAL_NAME) (MSYMBOL_LINKAGE_NAME, MSYMBOL_PRINT_NAME, MSYMBOL_DEMANGLED_NAME) (MSYMBOL_SET_LANGUAGE, MSYMBOL_SEARCH_NAME) (MSYMBOL_MATCHES_SEARCH_NAME, MSYMBOL_SET_NAMES): New macros. * ada-lang.c (ada_main_name): Update. (ada_lookup_simple_minsym): Update. (ada_make_symbol_completion_list): Update. (ada_add_standard_exceptions): Update. * ada-tasks.c (read_atcb, ada_tasks_inferior_data_sniffer): Update. * aix-thread.c (pdc_symbol_addrs, pd_enable): Update. * amd64-windows-tdep.c (amd64_skip_main_prologue): Update. * arm-tdep.c (skip_prologue_function): Update. (arm_skip_stack_protector, arm_skip_stub): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. (arm_wince_skip_main_prologue): Update. * auxv.c (ld_so_xfer_auxv): Update. * avr-tdep.c (avr_scan_prologue): Update. * ax-gdb.c (gen_var_ref): Update. * block.c (call_site_for_pc): Update. * blockframe.c (get_pc_function_start): Update. (find_pc_partial_function_gnu_ifunc): Update. * breakpoint.c (create_overlay_event_breakpoint): Update. (create_longjmp_master_breakpoint): Update. (create_std_terminate_master_breakpoint): Update. (create_exception_master_breakpoint): Update. (resolve_sal_pc): Update. * bsd-uthread.c (bsd_uthread_lookup_address): Update. * btrace.c (ftrace_print_function_name, ftrace_function_switched): Update. * c-valprint.c (c_val_print): Update. * coff-pe-read.c (add_pe_forwarded_sym): Update. * coffread.c (coff_symfile_read): Update. * common/agent.c (agent_look_up_symbols): Update. * dbxread.c (find_stab_function_addr): Update. (end_psymtab): Update. * dwarf2loc.c (call_site_to_target_addr): Update. (func_verify_no_selftailcall): Update. (tailcall_dump): Update. (call_site_find_chain_1): Update. (dwarf_expr_reg_to_entry_parameter): Update. * elfread.c (elf_gnu_ifunc_record_cache): Update. (elf_gnu_ifunc_resolve_by_got): Update. * f-valprint.c (info_common_command): Update. * findvar.c (read_var_value): Update. * frame.c (get_prev_frame_1): Update. (inside_main_func): Update. * frv-tdep.c (frv_skip_main_prologue): Update. (frv_frame_this_id): Update. * glibc-tdep.c (glibc_skip_solib_resolver): Update. * gnu-v2-abi.c (gnuv2_value_rtti_type): Update. * gnu-v3-abi.c (gnuv3_rtti_type): Update. (gnuv3_skip_trampoline): Update. * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline): Update. (hppa64_hpux_in_solib_call_trampoline): Update. (hppa_hpux_skip_trampoline_code): Update. (hppa64_hpux_search_dummy_call_sequence): Update. (hppa_hpux_find_import_stub_for_addr): Update. (hppa_hpux_find_dummy_bpaddr): Update. * hppa-tdep.c (hppa_symbol_address) (hppa_lookup_stub_minimal_symbol): Update. * i386-tdep.c (i386_skip_main_prologue): Update. (i386_pe_skip_trampoline_code): Update. * ia64-tdep.c (ia64_convert_from_func_ptr_addr): Update. * infcall.c (get_function_name): Update. * infcmd.c (until_next_command): Update. * jit.c (jit_breakpoint_re_set_internal): Update. (jit_inferior_init): Update. * linespec.c (minsym_found): Update. (add_minsym): Update. * linux-fork.c (info_checkpoints_command): Update. * linux-nat.c (get_signo): Update. * linux-thread-db.c (inferior_has_bug): Update. * m32c-tdep.c (m32c_return_value): Update. (m32c_m16c_address_to_pointer): Update. (m32c_m16c_pointer_to_address): Update. * m32r-tdep.c (m32r_frame_this_id): Update. * m68hc11-tdep.c (m68hc11_get_register_info): Update. * machoread.c (macho_resolve_oso_sym_with_minsym): Update. * maint.c (maintenance_translate_address): Update. * minsyms.c (add_minsym_to_hash_table): Update. (add_minsym_to_demangled_hash_table): Update. (msymbol_objfile): Update. (lookup_minimal_symbol): Update. (iterate_over_minimal_symbols): Update. (lookup_minimal_symbol_text): Update. (lookup_minimal_symbol_by_pc_name): Update. (lookup_minimal_symbol_solib_trampoline): Update. (lookup_minimal_symbol_by_pc_section_1): Update. (lookup_minimal_symbol_and_objfile): Update. (prim_record_minimal_symbol_full): Update. (compare_minimal_symbols): Update. (compact_minimal_symbols): Update. (build_minimal_symbol_hash_tables): Update. (install_minimal_symbols): Update. (terminate_minimal_symbol_table): Update. (find_solib_trampoline_target): Update. (minimal_symbol_upper_bound): Update. * mips-linux-tdep.c (mips_linux_skip_resolver): Update. * mips-tdep.c (mips_stub_frame_sniffer): Update. (mips_skip_pic_trampoline_code): Update. * msp430-tdep.c (msp430_skip_trampoline_code): Update. * objc-lang.c (selectors_info): Update. (classes_info): Update. (find_methods): Update. (find_imps): Update. (find_objc_msgsend): Update. * objfiles.c (objfile_relocate1): Update. * objfiles.h (ALL_OBJFILE_MSYMBOLS): Update. * obsd-tdep.c (obsd_skip_solib_resolver): Update. * p-valprint.c (pascal_val_print): Update. * parse.c (write_exp_msymbol): Update. * ppc-linux-tdep.c (powerpc_linux_in_dynsym_resolve_code) (ppc_linux_spe_context_lookup, ppc_elfv2_skip_entrypoint): Update. * ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update. * printcmd.c (build_address_symbolic): Update. (sym_info): Update. (address_info): Update. * proc-service.c (ps_pglobal_lookup): Update. * psymtab.c (find_pc_sect_psymtab_closer): Update. (find_pc_sect_psymtab): Update. * python/py-framefilter.c (py_print_frame): Update. * ravenscar-thread.c (get_running_thread_id): Update. * record-btrace.c (btrace_call_history, btrace_get_bfun_name): Update. * remote.c (remote_check_symbols): Update. * rs6000-tdep.c (rs6000_skip_main_prologue): Update. (rs6000_skip_trampoline_code): Update. * sh64-tdep.c (sh64_elf_make_msymbol_special): Update. * sol2-tdep.c (sol2_skip_solib_resolver): Update. * solib-dsbt.c (lm_base): Update. * solib-frv.c (lm_base): Update. (main_got): Update. * solib-irix.c (locate_base): Update. * solib-som.c (som_solib_create_inferior_hook): Update. (som_solib_desire_dynamic_linker_symbols): Update. (link_map_start): Update. * solib-spu.c (spu_enable_break): Update. (ocl_enable_break): Update. * solib-svr4.c (elf_locate_base): Update. (enable_break): Update. * spu-tdep.c (spu_get_overlay_table): Update. (spu_catch_start): Update. (flush_ea_cache): Update. * stabsread.c (define_symbol): Update. (scan_file_globals): Update. * stack.c (find_frame_funname): Update. (frame_info): Update. * symfile.c (simple_read_overlay_table): Update. (simple_overlay_update): Update. * symmisc.c (dump_msymbols): Update. * symtab.c (fixup_section): Update. (find_pc_sect_line): Update. (skip_prologue_sal): Update. (search_symbols): Update. (print_msymbol_info): Update. (rbreak_command): Update. (MCOMPLETION_LIST_ADD_SYMBOL): New macro. (completion_list_objc_symbol): Update. (default_make_symbol_completion_list_break_on): Update. * tracepoint.c (scope_info): Update. * tui/tui-disasm.c (tui_find_disassembly_address): Update. (tui_get_begin_asm_address): Update. * valops.c (find_function_in_inferior): Update. * value.c (value_static_field): Update. (value_fn_field): Update. |
||
Sergio Durigan Junior
|
d7b30f6729 |
Fix for PR tdep/16397: SystemTap SDT probe support for x86 doesn't work with "triplet operands"
This is the continuation of what Joel proposed on: <https://sourceware.org/ml/gdb-patches/2013-12/msg00977.html> Now that I have already submitted and pushed the patch to split i386_stap_parse_special_token into two smaller functions, it is indeed simpler to understand this patch. It occurs because, on x86, triplet displacement operands are allowed (like "-4+8-20(%rbp)"), and the current parser for this expression is buggy. It does not correctly extract the register name from the expression, which leads to incorrect evaluation. The parser was also being very "generous" with the expression, so I included a few more checks to ensure that we're indeed dealing with a triplet displacement operand. This patch also includes testcases for the two different kind of expressions that can be encountered on x86: the triplet displacement (explained above) and the three-argument displacement (as in "(%rbx,%ebx,-8)"). The tests are obviously arch-dependent and are placed under gdb.arch/. Message-ID: <m3mwj1j12v.fsf@redhat.com> URL: <https://sourceware.org/ml/gdb-patches/2014-01/msg00310.html> gdb/ 2014-02-20 Sergio Durigan Junior <sergiodj@redhat.com> PR tdep/16397 * i386-tdep.c (i386_stap_parse_special_token_triplet): Check if a number comes after the + or - signs. Adjust length of register name to be extracted. gdb/testsuite/ 2014-02-20 Sergio Durigan Junior <sergiodj@redhat.com> PR tdep/16397 * gdb.arch/amd64-stap-special-operands.exp: New file. * gdb.arch/amd64-stap-three-arg-disp.S: Likewise. * gdb.arch/amd64-stap-three-arg-disp.c: Likewise. * gdb.arch/amd64-stap-triplet.S: Likewise. * gdb.arch/amd64-stap-triplet.c: Likewise. |
||
Markus Metzger
|
c2170eeffa |
gdbarch: add instruction predicate methods
Add new methods to gdbarch for analyzing the instruction at a given address. Implement those methods for i386 and amd64 architectures. This is needed by "record btrace" to detect function calls in the execution trace. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call) (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New. (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump to gdbarch. * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret) (i386_insn_is_jump, i386_jmp_p): New. (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and insn_is_jump to gdbarch. * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New. * gdbarch.h: Regenerated. * gdbarch.c: Regenerated. * arch-utils.h (default_insn_is_call, default_insn_is_ret) (default_insn_is_jump): New. * arch-utils.c (default_insn_is_call, default_insn_is_ret) (default_insn_is_jump): New. |
||
Tom Tromey
|
fc270c357a |
replace XCALLOC with XCNEWVEC or XCNEW
This removes XCALLOC and replaces it either with XCNEWVEC, or, if the number of elements being requested was 1, with XCNEW. 2014-01-13 Tom Tromey <tromey@redhat.com> * defs.h (XCALLOC): Remove. * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC. (print_bcache_statistics): Use XCNEWVEC, not XCALLOC. * dwarf2loc.c (allocate_piece_closure): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_symfile_segments): Likewise. * gdbtypes.c (copy_type_recursive): Likewise. * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC. * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC. * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not XCALLOC. * mt-tdep.c (mt_gdbarch_init): Likewise. * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not XCALLOC. * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC. * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC. * registry.c (registry_alloc_data): Likewise. * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * serial.c (serial_fdopen_ops): Likewise. * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not XCALLOC. * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC. * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC, not XCALLOC. |
||
Sergio Durigan Junior
|
5acfdbae5d |
Split i386_stap_parse_special_token into smaller functions
This patch reorganizes code on gdb/i386-tdep.c's SystemTap SDT probe support functions. Before it, the code to parse special operands on x86 lived in a single, big function. This patch creates 2 new functions that makes the code more organized and removes a few indentation levels (which is always good IMO). I haven't modified anything logical in the functions, i.e., there's still one latent bug on i386_stap_parse_special_token_triplet now. I will soon post a patch to fix this, and to also improve the readability of the two new functions. 2014-01-12 Sergio Durigan Junior <sergiodj@redhat.com> * i386-tdep.c (i386_stap_parse_special_token_triplet): New function, with code from i386_stap_parse_special_token. (i386_stap_parse_special_token_three_arg_disp): Likewise. (i386_stap_parse_special_token): Move code to the two functions above; simplify it. |
||
Joel Brobecker
|
ecd75fc8ee | Update Copyright year range in all files maintained by GDB. | ||
H.J. Lu
|
f9fda3f571 |
Mask out PREFIX_ADDR when adding prefix to opcode
PREFIX_ADDR isn't a prefix to opcode. This patch masks out PREFIX_ADDR when adding prefix to opcode. PR gdb/16305 * i386-tdep.c (i386_process_record): Mask out PREFIX_ADDR when adding prefix to opcode. |
||
H.J. Lu
|
1e87984a63 |
Properly decode MODRM byte for 64-bit
64-bit mode doesn't use 16-bit address. We should always check SIB byte for address in 64-bit mode. PR gdb/16304 * i386-tdep.c (i386_record_lea_modrm_addr): Don't use 16-bit address in 64-bit mode. |
||
H.J. Lu
|
e85596e021 |
Zero-extend address from 32-bit to 64-bit for ADDR32 prefix
When there is ADDR32 prefix in 64-bit mode, we should zero-extend address from 32-bit to 64-bit. PR gdb/16304 * i386-tdep.c (i386_record_lea_modrm_addr): Zero-extend 32-bit address to 64-bit in 64-bit mode. |
||
Sergio Durigan Junior
|
05c0465e16 |
Extend SystemTap SDT probe argument parser
This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise. |
||
Pedro Alves
|
5ce0145de7 |
"tfind" across unavailable-stack frames.
Like when stepping, the current stack frame location is expected to be printed as result of tfind command, if that results in moving to a different function. In tfind_1 we see: if (from_tty && (has_stack_frames () || traceframe_number >= 0)) { enum print_what print_what; /* NOTE: in imitation of the step command, try to determine whether we have made a transition from one function to another. If so, we'll print the "stack frame" (ie. the new function and it's arguments) -- otherwise we'll just show the new source line. */ if (frame_id_eq (old_frame_id, get_frame_id (get_current_frame ()))) print_what = SRC_LINE; else print_what = SRC_AND_LOC; print_stack_frame (get_selected_frame (NULL), 1, print_what, 1); do_displays (); } However, when we haven't collected any registers in the tracepoint (collect $regs), that doesn't actually work: (gdb) tstart (gdb) info tracepoints Num Type Disp Enb Address What 1 tracepoint keep y 0x080483b7 in func0 at ../.././../git/gdb/testsuite/gdb.trace/circ.c:28 collect testload installed on target 2 tracepoint keep y 0x080483bc in func1 at ../.././../git/gdb/testsuite/gdb.trace/circ.c:32 collect testload installed on target (gdb) c Continuing. Breakpoint 3, end () at ../.././../git/gdb/testsuite/gdb.trace/circ.c:72 72 } (gdb) tstop (gdb) tfind start Found trace frame 0, tracepoint 1 #0 func0 () at ../.././../git/gdb/testsuite/gdb.trace/circ.c:28 28 } (gdb) tfind Found trace frame 1, tracepoint 2 32 } (gdb) When we don't have info about the stack available (UNWIND_UNAVAILABLE), frames end up with outer_frame_id as frame ID. And in the scenario above, the issue is that both frames before and after the second tfind (the frames for func0 an func1) have the same id (outer_frame_id), so the frame_id_eq check returns false, even though the frames were of different functions. GDB knows that, because the PC is inferred from the tracepoint's address, even if no registers were collected. To fix this, this patch adds support for frame ids with a valid code address, but <unavailable> stack address, and then makes the unwinders use that instead of the catch-all outer_frame_id for such frames. The frame_id_eq check in tfind_1 then automatically does the right thing as expected. I tested with --directory=gdb.trace/ , before/after the patch, and compared the resulting gdb.logs, then adjusted the tests to expect the extra output that came out. Turns out that was only circ.exp, the original test that actually brought this issue to light. Tested on x86_64 Fedora 17, native and gdbserver. gdb/ 2013-12-17 Pedro Alves <palves@redhat.com> * frame.h (enum frame_id_stack_status): New enum. (struct frame_id) <stack_addr>: Adjust comment. <stack_addr_p>: Delete field, replaced with ... <stack_status>: ... this new field. (frame_id_build_unavailable_stack): Declare. * frame.c (frame_addr_hash, fprint_field, outer_frame_id) (frame_id_build_special): Adjust. (frame_id_build_unavailable_stack): New function. (frame_id_build, frame_id_build_wild): Adjust. (frame_id_p, frame_id_eq, frame_id_inner): Adjust to take into account frames with unavailable stack. * amd64-tdep.c (amd64_frame_this_id) (amd64_sigtramp_frame_this_id, amd64_epilogue_frame_this_id): Use frame_id_build_unavailable_stack. * dwarf2-frame.c (dwarf2_frame_this_id): Likewise. * i386-tdep.c (i386_frame_this_id, i386_epilogue_frame_this_id) (i386_sigtramp_frame_this_id): Likewise. gdb/testsuite/ 2013-12-17 Pedro Alves <palves@redhat.com> * gdb.trace/circ.exp: Expect frame info to be printed when switching between frames with unavailable stack, but different functions. |
||
Yao Qi
|
0865b04a4d |
Use target_read_code in skip_prologue (i386)
GDB is able to cache memory accesses requested in target_read_code, so target_read_code is more efficient than general target_read_memory. This patch uses target_read_code and its variants to read target memory in the functions related to i386_skip_prologue. It improves the performance when doing 'b foo' (foo is a function) in remote debugging. Nowadays, when we set a breakpoint on function f1, GDB will fetch the code in f1 to determine the start of the function body (say skip the prologue), it requests read from target many times. With this patch applied, the number of RSP 'm' packets are reduced. gdb: 2013-12-10 Yao Qi <yao@codesourcery.com> * corefile.c (read_code): New function. (read_code_integer): New function. (read_code_unsigned_integer): New function. * gdbcore.h (read_code): Declare. (read_code_integer): Declare. (read_code_unsigned_integer): Declare. * i386-tdep.c (i386_follow_jump): Call target_read_code instead of target_read_memory. Call read_code_unsigned_integer instead of read_memory_unsigned_integer. (i386_analyze_struct_return): Likewise. (i386_skip_probe): Likewise. (i386_analyze_stack_align): Likewise. (i386_match_pattern): Likewise. (i386_skip_noop): Likewise. (i386_analyze_frame_setup): Likewise. (i386_analyze_register_saves): Likewise. (i386_skip_prologue): Likewise. (i386_skip_main_prologue): Likewise. (i386_frame_cache_1): Likewise. |
||
Walfred Tedeschi
|
1dbcd68cf1 |
Add MPX support for i386
2013-11-20 Walfred Tedeschi <walfred.tedeschi@intel.com> * i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Add MPX registers on the range of registers to be read from xsave buffer. (i386_linux_read_description): Add case for MPX. * i386-linux-tdep.c: Include features/i386/i386-mpx-linux.c. (i386_linux_gregset_reg_offset): Add MPX registers. (i386_linux_core_read_description): Initialize also MPX. (_initialize_i386_linux_tdep): Add mpx initialization. * i386-tdep.h (gdbarch_tdep): Add fields bnd0r_regnum, bnd0_regnum, mpx_register_names. (i386_regnum): Add MPX registers. (I386_MPX_NUM_REGS): New macro. (i386_bnd_regnum_p): New function. * i386-linux-tdep.h (I386_LINUX_NUM_REGS): Set number of registers to be the number of BNDSTATUS. (tdesc_i386_mpx_linux): Add description for MPX Linux registers. * i386-tdep.c: Include features/i386/i386-mpx.c. (i386_mpx_names): Add MPX register names array. (i386_bnd_names): Add bnd pseudo register names array. (i386_bndr_regnum_p): Lookup register numbers for bnd raw registers. (i386_bndr_regnum_p): Lookup register numbers for bnd raw registers. (386_mpx_ctrl_regnum_p): Lookup register numbers for MPX control registers. (i386_bnd_type): New function. (i386_pseudo_register_type): Use i386_bnd_type for bnd pseudo register types. (i386_pseudo_register_read_into_value): Add bnd case. (i386_pseudo_register_write): Add bnd pseudo registers. (i386_register_reggroup_p): Add MPX register to the group all. (i386_validate_tdesc_p): Add MPX to the target description validation. (i386_pseudo_register_name): Add bnd pseudo registers. (i386_gdbarch_init): Add MPX for architecture initialization. (_initia_initialize_i386_tdep): Add mpx initialization. * i387-tdep.c (xsave_mpx_offset): New vector for MPX offsets on XSAVE buffer. (XSAVE_MPX_ADDR): New macro. (i387_supply_xsave): Add MPX case. (i387_collect_xsave): Add MPX case. * i387-tdep.h (I387_BND0R_REGNUM): New macro. (I387_BNDCFGU_REGNUM): New macro. (I387_NUM_MPX_REGS): New macro. (I387_NUM_BND_REGS): New macro. (I387_NUM_MPX_CTRL_REGS): New macro. (I387_MPXEND_REGNUM): New macro. * common/i386-xstate.h (I386_XSTATE_BNDREGS): New macro. (I386_XSTATE_BNDCFG): Likewise. (I386_XSTATE_MPX_MASK): Likewise. (I386_XSTATE_ALL_MASK): New macro represents flags for all states. (I386_XSTATE_BNDREGS_SIZE): New macro. (I386_XSTATE_BNDCFG_SIZE): Likewise. (I386_XSTATE_SIZE): Adapt for MPX. (I386_XSTATE_MAX_SIZE): Likewise. Change-Id: I9ddb7d49434d86fa18eb6b99515203d7c567aefd Signed-off-by: Walfred Tedeschi <walfred.tedeschi@intel.com> Conflicts: gdb/ChangeLog |
||
Tom Tromey
|
0e9f083f4c |
remove gdb_string.h
This removes gdb_string.h. This patch is purely mechanical. I created it by running the two commands: git rm common/gdb_string.h perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl] 2013-11-18 Tom Tromey <tromey@redhat.com> * common/gdb_string.h: Remove. * aarch64-tdep.c: Use string.h, not gdb_string.h. * ada-exp.y: Use string.h, not gdb_string.h. * ada-lang.c: Use string.h, not gdb_string.h. * ada-lex.l: Use string.h, not gdb_string.h. * ada-typeprint.c: Use string.h, not gdb_string.h. * ada-valprint.c: Use string.h, not gdb_string.h. * aix-thread.c: Use string.h, not gdb_string.h. * alpha-linux-tdep.c: Use string.h, not gdb_string.h. * alpha-mdebug-tdep.c: Use string.h, not gdb_string.h. * alpha-nat.c: Use string.h, not gdb_string.h. * alpha-osf1-tdep.c: Use string.h, not gdb_string.h. * alpha-tdep.c: Use string.h, not gdb_string.h. * alphanbsd-tdep.c: Use string.h, not gdb_string.h. * amd64-dicos-tdep.c: Use string.h, not gdb_string.h. * amd64-linux-nat.c: Use string.h, not gdb_string.h. * amd64-linux-tdep.c: Use string.h, not gdb_string.h. * amd64-nat.c: Use string.h, not gdb_string.h. * amd64-sol2-tdep.c: Use string.h, not gdb_string.h. * amd64fbsd-tdep.c: Use string.h, not gdb_string.h. * amd64obsd-tdep.c: Use string.h, not gdb_string.h. * arch-utils.c: Use string.h, not gdb_string.h. * arm-linux-nat.c: Use string.h, not gdb_string.h. * arm-linux-tdep.c: Use string.h, not gdb_string.h. * arm-tdep.c: Use string.h, not gdb_string.h. * arm-wince-tdep.c: Use string.h, not gdb_string.h. * armbsd-tdep.c: Use string.h, not gdb_string.h. * armnbsd-nat.c: Use string.h, not gdb_string.h. * armnbsd-tdep.c: Use string.h, not gdb_string.h. * armobsd-tdep.c: Use string.h, not gdb_string.h. * avr-tdep.c: Use string.h, not gdb_string.h. * ax-gdb.c: Use string.h, not gdb_string.h. * ax-general.c: Use string.h, not gdb_string.h. * bcache.c: Use string.h, not gdb_string.h. * bfin-tdep.c: Use string.h, not gdb_string.h. * breakpoint.c: Use string.h, not gdb_string.h. * build-id.c: Use string.h, not gdb_string.h. * buildsym.c: Use string.h, not gdb_string.h. * c-exp.y: Use string.h, not gdb_string.h. * c-lang.c: Use string.h, not gdb_string.h. * c-typeprint.c: Use string.h, not gdb_string.h. * c-valprint.c: Use string.h, not gdb_string.h. * charset.c: Use string.h, not gdb_string.h. * cli-out.c: Use string.h, not gdb_string.h. * cli/cli-cmds.c: Use string.h, not gdb_string.h. * cli/cli-decode.c: Use string.h, not gdb_string.h. * cli/cli-dump.c: Use string.h, not gdb_string.h. * cli/cli-interp.c: Use string.h, not gdb_string.h. * cli/cli-logging.c: Use string.h, not gdb_string.h. * cli/cli-script.c: Use string.h, not gdb_string.h. * cli/cli-setshow.c: Use string.h, not gdb_string.h. * cli/cli-utils.c: Use string.h, not gdb_string.h. * coffread.c: Use string.h, not gdb_string.h. * common/common-utils.c: Use string.h, not gdb_string.h. * common/filestuff.c: Use string.h, not gdb_string.h. * common/linux-procfs.c: Use string.h, not gdb_string.h. * common/linux-ptrace.c: Use string.h, not gdb_string.h. * common/signals.c: Use string.h, not gdb_string.h. * common/vec.h: Use string.h, not gdb_string.h. * core-regset.c: Use string.h, not gdb_string.h. * corefile.c: Use string.h, not gdb_string.h. * corelow.c: Use string.h, not gdb_string.h. * cp-abi.c: Use string.h, not gdb_string.h. * cp-support.c: Use string.h, not gdb_string.h. * cp-valprint.c: Use string.h, not gdb_string.h. * cris-tdep.c: Use string.h, not gdb_string.h. * d-lang.c: Use string.h, not gdb_string.h. * dbxread.c: Use string.h, not gdb_string.h. * dcache.c: Use string.h, not gdb_string.h. * demangle.c: Use string.h, not gdb_string.h. * dicos-tdep.c: Use string.h, not gdb_string.h. * disasm.c: Use string.h, not gdb_string.h. * doublest.c: Use string.h, not gdb_string.h. * dsrec.c: Use string.h, not gdb_string.h. * dummy-frame.c: Use string.h, not gdb_string.h. * dwarf2-frame.c: Use string.h, not gdb_string.h. * dwarf2loc.c: Use string.h, not gdb_string.h. * dwarf2read.c: Use string.h, not gdb_string.h. * elfread.c: Use string.h, not gdb_string.h. * environ.c: Use string.h, not gdb_string.h. * eval.c: Use string.h, not gdb_string.h. * event-loop.c: Use string.h, not gdb_string.h. * exceptions.c: Use string.h, not gdb_string.h. * exec.c: Use string.h, not gdb_string.h. * expprint.c: Use string.h, not gdb_string.h. * f-exp.y: Use string.h, not gdb_string.h. * f-lang.c: Use string.h, not gdb_string.h. * f-typeprint.c: Use string.h, not gdb_string.h. * f-valprint.c: Use string.h, not gdb_string.h. * fbsd-nat.c: Use string.h, not gdb_string.h. * findcmd.c: Use string.h, not gdb_string.h. * findvar.c: Use string.h, not gdb_string.h. * fork-child.c: Use string.h, not gdb_string.h. * frame.c: Use string.h, not gdb_string.h. * frv-linux-tdep.c: Use string.h, not gdb_string.h. * frv-tdep.c: Use string.h, not gdb_string.h. * gdb.c: Use string.h, not gdb_string.h. * gdb_bfd.c: Use string.h, not gdb_string.h. * gdbarch.c: Use string.h, not gdb_string.h. * gdbtypes.c: Use string.h, not gdb_string.h. * gnu-nat.c: Use string.h, not gdb_string.h. * gnu-v2-abi.c: Use string.h, not gdb_string.h. * gnu-v3-abi.c: Use string.h, not gdb_string.h. * go-exp.y: Use string.h, not gdb_string.h. * go-lang.c: Use string.h, not gdb_string.h. * go32-nat.c: Use string.h, not gdb_string.h. * hppa-hpux-tdep.c: Use string.h, not gdb_string.h. * hppa-linux-nat.c: Use string.h, not gdb_string.h. * hppanbsd-tdep.c: Use string.h, not gdb_string.h. * hppaobsd-tdep.c: Use string.h, not gdb_string.h. * i386-cygwin-tdep.c: Use string.h, not gdb_string.h. * i386-dicos-tdep.c: Use string.h, not gdb_string.h. * i386-linux-nat.c: Use string.h, not gdb_string.h. * i386-linux-tdep.c: Use string.h, not gdb_string.h. * i386-nto-tdep.c: Use string.h, not gdb_string.h. * i386-sol2-tdep.c: Use string.h, not gdb_string.h. * i386-tdep.c: Use string.h, not gdb_string.h. * i386bsd-tdep.c: Use string.h, not gdb_string.h. * i386gnu-nat.c: Use string.h, not gdb_string.h. * i386nbsd-tdep.c: Use string.h, not gdb_string.h. * i386obsd-tdep.c: Use string.h, not gdb_string.h. * i387-tdep.c: Use string.h, not gdb_string.h. * ia64-libunwind-tdep.c: Use string.h, not gdb_string.h. * ia64-linux-nat.c: Use string.h, not gdb_string.h. * inf-child.c: Use string.h, not gdb_string.h. * inf-ptrace.c: Use string.h, not gdb_string.h. * inf-ttrace.c: Use string.h, not gdb_string.h. * infcall.c: Use string.h, not gdb_string.h. * infcmd.c: Use string.h, not gdb_string.h. * inflow.c: Use string.h, not gdb_string.h. * infrun.c: Use string.h, not gdb_string.h. * interps.c: Use string.h, not gdb_string.h. * iq2000-tdep.c: Use string.h, not gdb_string.h. * irix5-nat.c: Use string.h, not gdb_string.h. * jv-exp.y: Use string.h, not gdb_string.h. * jv-lang.c: Use string.h, not gdb_string.h. * jv-typeprint.c: Use string.h, not gdb_string.h. * jv-valprint.c: Use string.h, not gdb_string.h. * language.c: Use string.h, not gdb_string.h. * linux-fork.c: Use string.h, not gdb_string.h. * linux-nat.c: Use string.h, not gdb_string.h. * lm32-tdep.c: Use string.h, not gdb_string.h. * m2-exp.y: Use string.h, not gdb_string.h. * m2-typeprint.c: Use string.h, not gdb_string.h. * m32c-tdep.c: Use string.h, not gdb_string.h. * m32r-linux-nat.c: Use string.h, not gdb_string.h. * m32r-linux-tdep.c: Use string.h, not gdb_string.h. * m32r-rom.c: Use string.h, not gdb_string.h. * m32r-tdep.c: Use string.h, not gdb_string.h. * m68hc11-tdep.c: Use string.h, not gdb_string.h. * m68k-tdep.c: Use string.h, not gdb_string.h. * m68kbsd-tdep.c: Use string.h, not gdb_string.h. * m68klinux-nat.c: Use string.h, not gdb_string.h. * m68klinux-tdep.c: Use string.h, not gdb_string.h. * m88k-tdep.c: Use string.h, not gdb_string.h. * macrocmd.c: Use string.h, not gdb_string.h. * main.c: Use string.h, not gdb_string.h. * mdebugread.c: Use string.h, not gdb_string.h. * mem-break.c: Use string.h, not gdb_string.h. * memattr.c: Use string.h, not gdb_string.h. * memory-map.c: Use string.h, not gdb_string.h. * mep-tdep.c: Use string.h, not gdb_string.h. * mi/mi-cmd-break.c: Use string.h, not gdb_string.h. * mi/mi-cmd-disas.c: Use string.h, not gdb_string.h. * mi/mi-cmd-env.c: Use string.h, not gdb_string.h. * mi/mi-cmd-stack.c: Use string.h, not gdb_string.h. * mi/mi-cmd-var.c: Use string.h, not gdb_string.h. * mi/mi-cmds.c: Use string.h, not gdb_string.h. * mi/mi-console.c: Use string.h, not gdb_string.h. * mi/mi-getopt.c: Use string.h, not gdb_string.h. * mi/mi-interp.c: Use string.h, not gdb_string.h. * mi/mi-main.c: Use string.h, not gdb_string.h. * mi/mi-parse.c: Use string.h, not gdb_string.h. * microblaze-rom.c: Use string.h, not gdb_string.h. * microblaze-tdep.c: Use string.h, not gdb_string.h. * mingw-hdep.c: Use string.h, not gdb_string.h. * minidebug.c: Use string.h, not gdb_string.h. * minsyms.c: Use string.h, not gdb_string.h. * mips-irix-tdep.c: Use string.h, not gdb_string.h. * mips-linux-tdep.c: Use string.h, not gdb_string.h. * mips-tdep.c: Use string.h, not gdb_string.h. * mips64obsd-tdep.c: Use string.h, not gdb_string.h. * mipsnbsd-tdep.c: Use string.h, not gdb_string.h. * mipsread.c: Use string.h, not gdb_string.h. * mn10300-linux-tdep.c: Use string.h, not gdb_string.h. * mn10300-tdep.c: Use string.h, not gdb_string.h. * monitor.c: Use string.h, not gdb_string.h. * moxie-tdep.c: Use string.h, not gdb_string.h. * mt-tdep.c: Use string.h, not gdb_string.h. * nbsd-tdep.c: Use string.h, not gdb_string.h. * nios2-linux-tdep.c: Use string.h, not gdb_string.h. * nto-procfs.c: Use string.h, not gdb_string.h. * nto-tdep.c: Use string.h, not gdb_string.h. * objc-lang.c: Use string.h, not gdb_string.h. * objfiles.c: Use string.h, not gdb_string.h. * opencl-lang.c: Use string.h, not gdb_string.h. * osabi.c: Use string.h, not gdb_string.h. * osdata.c: Use string.h, not gdb_string.h. * p-exp.y: Use string.h, not gdb_string.h. * p-lang.c: Use string.h, not gdb_string.h. * p-typeprint.c: Use string.h, not gdb_string.h. * parse.c: Use string.h, not gdb_string.h. * posix-hdep.c: Use string.h, not gdb_string.h. * ppc-linux-nat.c: Use string.h, not gdb_string.h. * ppc-sysv-tdep.c: Use string.h, not gdb_string.h. * ppcfbsd-tdep.c: Use string.h, not gdb_string.h. * ppcnbsd-tdep.c: Use string.h, not gdb_string.h. * ppcobsd-tdep.c: Use string.h, not gdb_string.h. * printcmd.c: Use string.h, not gdb_string.h. * procfs.c: Use string.h, not gdb_string.h. * prologue-value.c: Use string.h, not gdb_string.h. * python/py-auto-load.c: Use string.h, not gdb_string.h. * python/py-gdb-readline.c: Use string.h, not gdb_string.h. * ravenscar-thread.c: Use string.h, not gdb_string.h. * regcache.c: Use string.h, not gdb_string.h. * registry.c: Use string.h, not gdb_string.h. * remote-fileio.c: Use string.h, not gdb_string.h. * remote-m32r-sdi.c: Use string.h, not gdb_string.h. * remote-mips.c: Use string.h, not gdb_string.h. * remote-sim.c: Use string.h, not gdb_string.h. * remote.c: Use string.h, not gdb_string.h. * reverse.c: Use string.h, not gdb_string.h. * rs6000-aix-tdep.c: Use string.h, not gdb_string.h. * ser-base.c: Use string.h, not gdb_string.h. * ser-go32.c: Use string.h, not gdb_string.h. * ser-mingw.c: Use string.h, not gdb_string.h. * ser-pipe.c: Use string.h, not gdb_string.h. * ser-tcp.c: Use string.h, not gdb_string.h. * ser-unix.c: Use string.h, not gdb_string.h. * serial.c: Use string.h, not gdb_string.h. * sh-tdep.c: Use string.h, not gdb_string.h. * sh64-tdep.c: Use string.h, not gdb_string.h. * shnbsd-tdep.c: Use string.h, not gdb_string.h. * skip.c: Use string.h, not gdb_string.h. * sol-thread.c: Use string.h, not gdb_string.h. * solib-dsbt.c: Use string.h, not gdb_string.h. * solib-frv.c: Use string.h, not gdb_string.h. * solib-osf.c: Use string.h, not gdb_string.h. * solib-spu.c: Use string.h, not gdb_string.h. * solib-target.c: Use string.h, not gdb_string.h. * solib.c: Use string.h, not gdb_string.h. * somread.c: Use string.h, not gdb_string.h. * source.c: Use string.h, not gdb_string.h. * sparc-nat.c: Use string.h, not gdb_string.h. * sparc-sol2-tdep.c: Use string.h, not gdb_string.h. * sparc-tdep.c: Use string.h, not gdb_string.h. * sparc64-tdep.c: Use string.h, not gdb_string.h. * sparc64fbsd-tdep.c: Use string.h, not gdb_string.h. * sparc64nbsd-tdep.c: Use string.h, not gdb_string.h. * sparcnbsd-tdep.c: Use string.h, not gdb_string.h. * spu-linux-nat.c: Use string.h, not gdb_string.h. * spu-multiarch.c: Use string.h, not gdb_string.h. * spu-tdep.c: Use string.h, not gdb_string.h. * stabsread.c: Use string.h, not gdb_string.h. * stack.c: Use string.h, not gdb_string.h. * std-regs.c: Use string.h, not gdb_string.h. * symfile.c: Use string.h, not gdb_string.h. * symmisc.c: Use string.h, not gdb_string.h. * symtab.c: Use string.h, not gdb_string.h. * target.c: Use string.h, not gdb_string.h. * thread.c: Use string.h, not gdb_string.h. * tilegx-linux-nat.c: Use string.h, not gdb_string.h. * tilegx-tdep.c: Use string.h, not gdb_string.h. * top.c: Use string.h, not gdb_string.h. * tracepoint.c: Use string.h, not gdb_string.h. * tui/tui-command.c: Use string.h, not gdb_string.h. * tui/tui-data.c: Use string.h, not gdb_string.h. * tui/tui-disasm.c: Use string.h, not gdb_string.h. * tui/tui-file.c: Use string.h, not gdb_string.h. * tui/tui-layout.c: Use string.h, not gdb_string.h. * tui/tui-out.c: Use string.h, not gdb_string.h. * tui/tui-regs.c: Use string.h, not gdb_string.h. * tui/tui-source.c: Use string.h, not gdb_string.h. * tui/tui-stack.c: Use string.h, not gdb_string.h. * tui/tui-win.c: Use string.h, not gdb_string.h. * tui/tui-windata.c: Use string.h, not gdb_string.h. * tui/tui-winsource.c: Use string.h, not gdb_string.h. * typeprint.c: Use string.h, not gdb_string.h. * ui-file.c: Use string.h, not gdb_string.h. * ui-out.c: Use string.h, not gdb_string.h. * user-regs.c: Use string.h, not gdb_string.h. * utils.c: Use string.h, not gdb_string.h. * v850-tdep.c: Use string.h, not gdb_string.h. * valarith.c: Use string.h, not gdb_string.h. * valops.c: Use string.h, not gdb_string.h. * valprint.c: Use string.h, not gdb_string.h. * value.c: Use string.h, not gdb_string.h. * varobj.c: Use string.h, not gdb_string.h. * vax-tdep.c: Use string.h, not gdb_string.h. * vaxnbsd-tdep.c: Use string.h, not gdb_string.h. * vaxobsd-tdep.c: Use string.h, not gdb_string.h. * windows-nat.c: Use string.h, not gdb_string.h. * xcoffread.c: Use string.h, not gdb_string.h. * xml-support.c: Use string.h, not gdb_string.h. * xstormy16-tdep.c: Use string.h, not gdb_string.h. * xtensa-linux-nat.c: Use string.h, not gdb_string.h. |
||
Yao Qi
|
6df81a635e |
gdb/
* i386-tdep.c (i386_in_stack_tramp_p): Remove unused parameter 'gdbarch'. (i386_stack_tramp_frame_sniffer): Caller update. * i386-linux-tdep.c (i386_linux_core_read_xcr0): Remove parameter 'gdbarch' and 'target'. (i386_linux_core_read_description): Caller update. * amd64-linux-tdep.c (amd64_linux_core_read_description): Likewise. * i386-linux-tdep.h (i386_linux_core_read_xcr0): Update declaration. |
||
Tom Tromey
|
7cbd4a934e |
* minsyms.h (struct bound_minimal_symbol): New.
(lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol. Remove objfile argument. (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc): Return bound_minimal_symbol. * minsyms.c (lookup_minimal_symbol_by_pc_1) (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc): Return bound_minimal_symbol. (in_gnu_ifunc_stub): Update. (lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol. Remove 'objfile_p' argument. (lookup_solib_trampoline_symbol_by_pc): Update. * ada-tasks.c, amd64-windows-tdep.c, arm-tdep.c, arm-wince-tdep.c, block.c, blockframe.c, breakpoint.c, btrace.c, c-valprint.c, dwarf2loc.c, elfread.c, frame.c, frv-tdep.c, glibc-tdep.c, gnu-v2-abi.c, gnu-v3-abi.c, hppa-hpux-tdep.c, i386-tdep.c, ia64-tdep.c, infcall.c, infcmd.c, jit.c, linux-fork.c, m32c-tdep.c, m68hc11-tdep.c, maint.c, mips-tdep.c, p-valprint.c, parse.c, ppc-linux-tdep.c, ppc-sysv-tdep.c, printcmd.c, rs6000-tdep.c, sh64-tdep.c, stack.c, symtab.c, tui/tui-disasm.c: Update. |
||
Pedro Alves
|
a0bcdaa75e |
More invalid pointer to pointer conversions.
As a follow up to: http://sourceware.org/ml/gdb-patches/2013-03/msg00449.html In a nutshell, casts between 'char **' <-> 'unsigned char **' and 'char **' <-> 'const char **' are invalid. I grepped for "\*\*) &" and found these. There's another one in demangle.c, but I've split fixing that one to a separate patch. I think the ada_decode_symbol change is perhaps the one that could be surprising. The function's description has this comment, which makes things much clearer: The GSYMBOL parameter is "mutable" in the C++ sense: logically const, but nevertheless modified to a semantically equivalent form when a decoded name is cached in it. */ const char * ada_decode_symbol (const struct general_symbol_info *gsymbol) With that out of the way, I think the patch ends up being pretty obvious. Tested on x86_64 Fedora 17. gdb/ 2013-03-13 Pedro Alves <palves@redhat.com> * ada-lang.c (ada_decode_symbol): Cast away constness of GSYMBOL rather than casting 'const char * const *' to 'const char **'. * ada-lex.l (processInt): Make "trailer" local const. Remove 'const char **' cast. * arm-linux-tdep.c (arm_stap_parse_special_token): Add 'char *' locals, and use those as strtol output pointer, instead than doing invalid casts to from 'const char **' to 'char **'. (_initialize_demangle): Remove cast. * i386-tdep.c (i386_stap_parse_special_token): : Add 'char *' locals, and use those as strtol output pointer, instead than doing invalid casts to from 'const char **' to 'char **'. * solib-dsbt.c (dsbt_get_initial_loadmaps): Remove 'gdb_byte**' casts. * stap-probe.c (stap_parse_register_operand) (stap_parse_single_operand): Likewise. |
||
Markus Metzger
|
25ea693b87 |
Rename record_ prefixes in record-full.h into record_full_.
gdb/ * record-full.h, record-full.c (record_memory_query): Rename to ... (record_full_memory_query): ...this. Update all users. (record_arch_list_add_reg): Rename to ... (record_full_arch_list_add_reg): ...this. Update all users. (record_arch_list_add_mem): Rename to ... (record_full_arch_list_add_mem): ...this. Update all users. (record_arch_list_add_end): Rename to ... (record_full_arch_list_add_end): ...this. Update all users. (record_gdb_operation_disable_set): Rename to ... (record_full_gdb_operation_disable_set): ...this. Update all users. |
||
Markus Metzger
|
d02ed0bbfa |
Split record.h into record.h and record-full.h.
Split record.c into record.c and record-full.c. The split leaves the command part in record.c and moves the target part into record-full.c. gdb/ * record.h: Split into this and ... * record-full.h: ... this. * record.c: Split into this and ... * record-full.c: ... this. * target.h (target_ops): Add new fields to_info_record, to_save_record, to_delete_record, to_record_is_replaying, to_goto_record_begin, to_goto_record_end, to_goto_record. (target_info_record): New. (target_save_record): New. (target_supports_delete_record): New. (target_delete_record): New. (target_record_is_replaying): New. (target_goto_record_begin): New. (target_goto_record_end): New. (target_goto_record): New. * target.c (target_info_record): New. (target_save_record): New. (target_supports_delete_record): New. (target_delete_record): New. (target_record_is_replaying): New. (target_goto_record_begin): New. (target_goto_record_end): New. (target_goto_record): New. * record.h: Declare struct cmd_list_element. (record_cmdlist): New declaration. (set_record_cmdlist): New declaration. (show_record_cmdlist): New declaration. (info_record_cmdlist): New declaration. (cmd_record_goto): New declaration. * record.c: Remove unnecessary includes. Include inferior.h. (cmd_record_goto): Remove declaration. (record_cmdlist): Now extern. Initialize. (set_record_cmdlist): Now extern. Initialize. (show_record_cmdlist): Now extern. Initialize. (info_record_cmdlist): Now extern. Initialize. (find_record_target): New. (require_record_target): New. (cmd_record_start): Update. (cmd_record_delete): Remove target-specific code. Call target_delete_record. (cmd_record_stop): Unpush any record target. (set_record_insn_max_num): Move to record-full.c (set_record_command): Add comment. (show_record_command): Add comment. (info_record_command): Update comment. Remove target-specific code. Call the record target's to_info_record. (cmd_record_start): New. (cmd_record_goto): Now extern. Remove target-specific code. Call target_goto_begin, target_goto_end, or target_goto. (_initialize_record): Move record target ops initialization to record-full.c. Change "record" command help text. Move "record restore", "record set", and "record show" commands to record-full.c. * Makefile.in (SFILES): Add record-full.c. (HFILES_NO_SRCDIR): Add record-full.h. (COMMON_OBS): Add record-full.o. * amd64-linux-tdep.c: Include record-full.h instead of record.h. * arm-tdep.c: Include record-full.h. * i386-linux-tdep.c: Include record-full.h instead of record.h. * i386-tdep.c: Include record-full.h. * infrun.c: Include record-full.h. * linux-record.c: Include record-full.h. * moxie-tdep.c: Include record-full.h. * record-full.c: Include record-full.h. Change module comment. (set_record_full_cmdlist): New. (show_record_full_cmdlist): New. (record_full_cmdlist): New. (record_goto_insn): New declaration. (record_save): New declaration. (record_check_insn_num): Change query string. (record_info): New. (record_delete): New. (record_is_replaying): New. (record_goto_entry): New. (record_goto_begin): New. (record_goto_end): New. (record_goto): New. (init_record_ops): Update. (init_record_core_ops): Update. (cmd_record_save): Rename to record_save. Remove target and arg checks. (cmd_record_start): New. (set_record_insn_max_num): Moved from record.c (set_record_full_command): New. (show_record_full_command): New. (_initialize_record_full): New. |
||
Aleksandar Ristovski
|
5799c0b969 |
2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
* charset.c (intermediate_encoding): Remove unused i. * completer.c (signal_completer): Remove unused i. * continuations.c (discard_my_continuations_1): Remove unused continuation_ptr. * corelow.c (core_close): Remove unuseD name. (get_core_siginfo): Remove unused pid. * cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused i, cps. * dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset. (loclist_describe_location): Remove unused first. * event-top.c (command_line_handler): Remove unused got_eof. * exec.c (exec_close_1): Remove unused need_symtab_cleanup. (resize_section_table): Remove unused old_value. * gdb_bfd.c (gdb_bfd_map_section): Remove unused header. * gnu-v3-abi.c (compute_vtable_size): Remove unused addr. * i386-tdep.c (i386_process_record): Remove unused rex. * infcmd.c (get_return_value): Remove unused uiout. * jv-lang.c (type_from_class): Remove unused is_array. * jv-valprint.c (java_val_print): Remove unused i. * linux-nat.c (linux_nat_stop_lwp): Remove unused ptid. * linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid. * m2-typeprint.c (m2_print_type): Remove unused code. * macroexp.c (get_character_constant): Remove unused body_start. (macro_stringify): Remove unused result. * objc-lang.c (find_methods): Remove unused gdbarch. * objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2. * regcache.c (regcache_cooked_read): Remove unused gdbarch. * stack.c (print_frame_args): Remove unused summary. * thread.c (thread_apply_command): Remove unused p. * valarith.c (value_x_unop): Remove unused mangle_ptr. * valops.c (search_struct_method): Remove unused skip. * valprint.c (generic_val_print): Remove unused byte_order. * varobj.c (varobj_update): Remove unused changed. * cli/cli-cmds.c (complete_command): Remove unused next_item. (alias_command): Remove unused c. * mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c. * mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused format. (mi_cmd_data_write_memory): Remove unused word_format. (mi_cmd_data_write_memory_bytes): Remove unused r. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused p_start, p_end. * python/python.c (_initialize_python): Remove unused cmd_name, cmd. * tui/tui-disasm.c (tui_set_disassem_content): Remove unused line_width. Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00766.html |
||
Joel Brobecker
|
28e7fd6234 |
Update years in copyright notice for the GDB files.
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF. |
||
Pedro Alves
|
05b4bd799a |
gdb/
2012-12-11 Pedro Alves <palves@redhat.com> * configure.ac (detect type of /proc): Remove Unixware handling. * configure: Regenerate. * proc-api.c (ioctl_table) [PIOCLSTATUS]: Don't mention Unixware. (ioctl_table) [PCRESET]: Remove entry. * proc-events.c (SYS_lwp_create, SYS_lwp_exit, SYS_lwp_wait) (SYS_lwp_self, SYS_lwp_info, SYS_lwp_private, SYS_lwp_kill) (SYS_lwp_suspend, SYS_lwp_continue): Don't define. * proc-why.c (pr_why_table) [PR_SUSPENDED]: Don't mention Unixware. * procfs.c: Remove all UNIXWARE guarded code, and all traces of Unixware in comments throughout. * i386-tdep.c (i386_svr4_sigtramp_p): Don't match _sigacthandler, and remove mention of Unixware. gdb/doc/ 2012-12-11 Pedro Alves <palves@redhat.com> * gdb.texinfo: Remove all mentions of Unixware throughout. |
||
Karthik Bhat
|
56bf074305 | Fix for incorrect breakpoint set in case of clang compiled binary | ||
Pedro Alves
|
e0f33b1fbf | Revert previous change to i386-tdep.c. | ||
Karthik Bhat
|
4e879fc2fd | Fix for incorrect breakpoint set in case of clang compiled binary | ||
Joel Brobecker
|
ca9d61b90f |
rename frame_register_read into deprecated_frame_register_read.
gdb/ChangeLog: * frame.h (deprecated_frame_register_read): Renames frame_register_read. * frame.c (deprecated_frame_register_read): Renames frame_register_read. Update all callers. * i386-tdep.c: Update all callers of frame_register_read. * infcmd.c: Likewise. * jit.c: Likewise. * mips-tdep.c: Likewise. * mt-tdep.c: Likewise. * sh64-tdep.c: Likewise. |
||
Yao Qi
|
30f8135b5c |
gdb:
* i386-tdep.c (i386_analyze_frame_setup): Handle opcode 0x8d (lea). |
||
Pedro Alves
|
144db8270d |
2012-10-26 Pedro Alves <palves@redhat.com>
* amd64-tdep.c (amd64_relocate_instruction): Use store_unsigned_integer instead of memcpy. * i386-tdep.c (i386_relocate_instruction): Ditto. |
||
Mark Kettenis
|
2445fd7b3a |
PR gdb/12783
* i386-tdep.c (i386_return_value): Handle complex double and long double. |
||
H.J. Lu
|
eab09350a3 |
Remove sp_regnum_from_eax and pc_regnum_from_eax
PR backtrace/14646 PR gdb/14647 * i386-tdep.h (gdbarch_tdep): Remove sp_regnum_from_eax and pc_regnum_from_eax. * i386-tdep.c (i386_gdbarch_init): Don't use sp_regnum_from_eax nor pc_regnum_from_eax. * amd64-tdep.c (amd64_x32_init_abi): Don't set sp_regnum_from_eax nor pc_regnum_from_eax. |
||
Pedro Alves
|
99c1624c13 |
2012-07-20 Pedro Alves <palves@redhat.com>
* i386-tdep.c (i386_record_modrm, i386_record_lea_modrm_addr) (i386_record_lea_modrm, i386_record_push, i386_record_floats) (i386_process_record): Tweak description comments. |
||
Pedro Alves
|
4ffa4fc748 |
2012-07-20 Pedro Alves <palves@redhat.com>
* i386-tdep.c (i386_record_modrm, i386_record_lea_modrm_addr) (i386_process_record): Use record_read_memory. * record.c (record_read_memory): New function. (record_arch_list_add_mem, record_exec_insn): Use record_read_memory. * record.h (record_read_memory): Declare. |
||
H.J. Lu
|
23e2d720d1 |
Add sp_regnum_from_eax/pc_regnum_from_eax to i386 gdbarch_tdep
* amd64-tdep.c (amd64_x32_init_abi): Set sp_regnum_from_eax to AMD64_RSP_REGNUM and pc_regnum_from_eax to AMD64_RIP_REGNUM. * i386-tdep.c (i386_gdbarch_init): Initialize sp_regnum_from_eax and pc_regnum_from_eax to -1. Update SP regnum from sp_regnum_from_eax and PC regnum from pc_regnum_from_eax if needed. * i386-tdep.h (gdbarch_tdep): Add sp_regnum_from_eax and pc_regnum_from_eax. |
||
Jan Kratochvil
|
a9b8d892d6 |
gdb/
Switch i386 and derived targets to ON_STACK. * amd64-dicos-tdep.c (amd64_dicos_push_dummy_code): Remove. (amd64_dicos_init_abi): Remove its installment. * dicos-tdep.c (dicos_init_abi): Remove the set_gdbarch_call_dummy_location call. Update the comment here. * i386-dicos-tdep.c (i386_dicos_push_dummy_code): Remove. (i386_dicos_init_abi): Remove its installment. * i386-tdep.c (i386_push_dummy_code): New function. (i386_gdbarch_init): Call set_gdbarch_call_dummy_location, install i386_push_dummy_code. |
||
Mark Kettenis
|
284c5a60c3 |
PR tdep/14222
* i386-tdep.c (i386_push_dummy_call): Unconditionally align the stack on a 16-byte boundary. |
||
Mark Kettenis
|
fff4548bff |
H.J. Lu <hongjiu.lu@intel.com>
* i386-tdep.h (i386_pseudo_register_name): New prototype. * i386-tdep.c (i386_pseudo_register_name): Make public. * amd64-tdep.h (amd64_x32_init_abi): New prototype. * amd64-tdep.c (amd64_dword_names): Add "eip". (amd64_x32_pseudo_register_type): New function (amd64_x32_init_abi): New function. |
||
Sergio Durigan Junior
|
22e048c9dd |
2012-05-18 Sergio Durigan Junior <sergiodj@redhat.com>
* ada-lang.c: * ada-tasks.c: * ada-varobj.c: * amd64-darwin-tdep.c: * arm-symbian-tdep.c: * arm-tdep.c: * avr-tdep.c: * ax-gdb.c: * bfin-linux-tdep.c: * breakpoint.c: * c-valprint.c: * cli/cli-cmds.c: * coffread.c: * cp-support.c: * cris-tdep.c: * dwarf2-frame-tailcall.c: * dwarf2-frame.c: * dwarf2expr.c: * dwarf2loc.c: * dwarf2read.c: * elfread.c: * eval.c: * expprint.c: * f-valprint.c: * frv-tdep.c: * h8300-tdep.c: * hppa-hpux-tdep.c: * hppa-tdep.c: * hppanbsd-tdep.c: * i386-nto-tdep.c: * i386-tdep.c: * i387-tdep.c: * ia64-tdep.c: * jit.c: * linespec.c: * linux-tdep.c: * lm32-tdep.c: * m2-valprint.c: * m32c-tdep.c: * m32r-rom.c: * m32r-tdep.c: * m68k-tdep.c: * m68klinux-tdep.c: * mi/mi-main.c: * microblaze-tdep.c: * mips-linux-tdep.c: * mips-tdep.c: * mn10300-tdep.c: * p-valprint.c: * parse.c: * ppc-linux-tdep.c: * ppc-sysv-tdep.c: * printcmd.c: * python/py-finishbreakpoint.c: * python/py-inferior.c: * python/py-infthread.c: * python/py-type.c: * python/python.c: * remote-fileio.c: * remote-m32r-sdi.c: * remote-mips.c: * reverse.c: * rl78-tdep.c: * rs6000-aix-tdep.c: * rs6000-tdep.c: * s390-tdep.c: * score-tdep.c: * sh64-tdep.c: * skip.c: * solib-darwin.c: * solib-dsbt.c: * solib-frv.c: * sparc-tdep.c: * spu-multiarch.c: * spu-tdep.c: * stack.c: * symfile.c: * symtab.c: * tic6x-tdep.c: * tracepoint.c: * v850-tdep.c: * valarith.c: * valprint.c: * value.c: * xcoffread.c: * xtensa-tdep.c: * ada-lang.c: * ada-tasks.c: * ada-varobj.c: * amd64-darwin-tdep.c: * arm-symbian-tdep.c: * arm-tdep.c: Delete unused variables. |
||
Maciej W. Rozycki
|
6a3a010ba6 |
gdb/
* breakpoint.h (bp_location): Add related_address member. * inferior.h (get_return_value): Take a pointer to struct value instead of struct type for the function requested. * value.h (using_struct_return): Likewise. * gdbarch.sh (return_value): Take a pointer to struct value instead of struct type for the function requested. * breakpoint.c (set_breakpoint_location_function): Initialize related_address for bp_gnu_ifunc_resolver breakpoints. * elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the requested function's address to gdbarch_return_value. * eval.c (evaluate_subexp_standard): Pass the requested function's address to using_struct_return. * infcall.c (call_function_by_hand): Pass the requested function's address to using_struct_return and gdbarch_return_value. * infcmd.c (get_return_value): Take a pointer to struct value instead of struct type for the function requested. (print_return_value): Update accordingly. (finish_command_continuation): Likewise. * stack.c (return_command): Pass the requested function's address to using_struct_return and gdbarch_return_value. * value.c (using_struct_return): Take a pointer to struct value instead of struct type for the function requested. Pass the requested function's address to gdbarch_return_value. * python/py-finishbreakpoint.c (finish_breakpoint_object): New function_value member, replacing function_type. (bpfinishpy_dealloc): Update accordingly. (bpfinishpy_pre_stop_hook): Likewise. (bpfinishpy_init): Likewise. Record the requested function's address. * mips-tdep.c (mips_fval_reg): New enum. (mips_o32_push_dummy_call): For MIPS16 FP doubles do not swap words put in GP registers. (mips_o64_push_dummy_call): Update a comment. (mips_o32_return_value): Take a pointer to struct value instead of struct type for the function requested and use it to check if using the MIPS16 calling convention. Return the designated general purpose registers for floating-point values returned in MIPS16 mode. (mips_o64_return_value): Likewise. * ppc-tdep.h (ppc_sysv_abi_return_value): Update prototype. (ppc_sysv_abi_broken_return_value): Likewise. (ppc64_sysv_abi_return_value): Likewise. * alpha-tdep.c (alpha_return_value): Take a pointer to struct value instead of struct type for the function requested. * amd64-tdep.c (amd64_return_value): Likewise. * amd64-windows-tdep.c (amd64_windows_return_value): Likewise. * arm-tdep.c (arm_return_value): Likewise. * avr-tdep.c (avr_return_value): Likewise. * bfin-tdep.c (bfin_return_value): Likewise. * cris-tdep.c (cris_return_value): Likewise. * frv-tdep.c (frv_return_value): Likewise. * h8300-tdep.c (h8300_return_value): Likewise. (h8300h_return_value): Likewise. * hppa-tdep.c (hppa32_return_value): Likewise. (hppa64_return_value): Likewise. * i386-tdep.c (i386_return_value): Likewise. * ia64-tdep.c (ia64_return_value): Likewise. * iq2000-tdep.c (iq2000_return_value): Likewise. * lm32-tdep.c (lm32_return_value): Likewise. * m32c-tdep.c (m32c_return_value): Likewise. * m32r-tdep.c (m32r_return_value): Likewise. * m68hc11-tdep.c (m68hc11_return_value): Likewise. * m68k-tdep.c (m68k_return_value): Likewise. (m68k_svr4_return_value): Likewise. * m88k-tdep.c (m88k_return_value): Likewise. * mep-tdep.c (mep_return_value): Likewise. * microblaze-tdep.c (microblaze_return_value): Likewise. * mn10300-tdep.c (mn10300_return_value): Likewise. * moxie-tdep.c (moxie_return_value): Likewise. * mt-tdep.c (mt_return_value): Likewise. * ppc-linux-tdep.c (ppc_linux_return_value): Likewise. * ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Likewise. (ppc_sysv_abi_broken_return_value): Likewise. (ppc64_sysv_abi_return_value): Likewise. * ppcnbsd-tdep.c (ppcnbsd_return_value): Likewise. * rl78-tdep.c (rl78_return_value): Likewise. * rs6000-aix-tdep.c (rs6000_return_value): Likewise. * rx-tdep.c (rx_return_value): Likewise. * s390-tdep.c (s390_return_value): Likewise. * score-tdep.c (score_return_value): Likewise. * sh-tdep.c (sh_return_value_nofpu): Likewise. (sh_return_value_fpu): Likewise. * sh64-tdep.c (sh64_return_value): Likewise. * sparc-tdep.c (sparc32_return_value): Likewise. * sparc64-tdep.c (sparc64_return_value): Likewise. * spu-tdep.c (spu_return_value): Likewise. * tic6x-tdep.c (tic6x_return_value): Likewise. * v850-tdep.c (v850_return_value): Likewise. * vax-tdep.c (vax_return_value): Likewise. * xstormy16-tdep.c (xstormy16_return_value): Likewise. * xtensa-tdep.c (xtensa_return_value): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. gdb/testsuite/ * gdb.base/return-nodebug.exp: Also test float and double types. |
||
Yao Qi
|
f4644a3fe0 |
gdb:
* i386-tdep.c (i386_fetch_pointer_argument): Remove extra space. (i386_process_record): Ditto. |
||
Sergio Durigan Junior
|
d71871bcbc |
2012-05-02 Sergio Durigan Junior <sergiodj@gmail.com>
* i386-tdep.c (i386_stap_parse_special_token) <s>: Remove unused variable. * stap-probe.c (stap_parse_single_operand) <reg_suffix, reg_ind_suffix, reg_suffix_len, reg_ind_suffix_len>: Likewise. (stap_parse_argument) <e>: Likewise. (handle_stap_probe) <byte_order>: Likewise. |
||
Sergio Durigan Junior
|
55aa24fb2e |
2012-04-27 Sergio Durigan Junior <sergiodj@redhat.com>
Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value. |