* bfd-in2.h: Add support for MIPS r5900
* config.bfd: Add support for Sony Playstation 2
* cpu-mips.c: Add support for MIPS r5900
* elfxx-mips.c: Add support for MIPS r5900 (extension of r4000)
* config/tc-mips.c: Add support for MIPS r5900
Add M_LQ_AB and M_SQ_AB to support large values for instructions lq and sq.
* config/tc-mips.c (can_swap_branch_p, get_append_method): Detect some conditional short loops to fix a bug on the r5900 by NOP in the branch delay slot.
* config/tc-mips.c (M_MUL): Support 3 operands in multu on r5900.
* config/tc-mips.c (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
* config/tc-mips.c (s_mipsset): Force 32 bit floating point on r5900.
* configure.in: Detect CPU type when target string contains r5900 (e.g. mips64r5900el-linux-gnu).
* config/tc-mips.c (mips_ip): Check parameter range of instructions mfps and mtps on r5900.
* elf/mips.h: Add MIPS machine variant number for r5900 which is compatible with old Playstation 2 software.
* opcode/mips.h: Add support for r5900 instructions including lq and sq.
* configure.tgt: Support ELF files for Sony Playstation 2 (for ps2dev and ps2sdk).
* emulparams/elf32lr5900n32.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI n32.
* emulparams/elf32lr5900.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI o32.
* Makefile.am: Add linker scripts for Sony Playstation 2 ELF files.
* opcodes/mips-dis.c: Add names for CP0 registers of r5900.
* opcodes/mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for instructions sq and lq.
* opcodes/mips-opc.c: Add support for MIPS r5900 CPU.
Add support for 128 bit MMI (Multimedia Instructions).
Add support for EE instructions (Emotion Engine).
Disable unsupported floating point instructions (64 bit and undefined compare operations).
Enable instructions of MIPS ISA IV which are supported by r5900.
Disable 64 bit co processor instructions.
Disable 64 bit multiplication and division instructions.
Disable instructions for co-processor 2 and 3, because these are not supported (preparation for later VU0 support (Vector Unit)).
Disable cvt.w.s because this behaves like trunc.w.s and the correct execution can't be ensured on r5900.
Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This will confuse less developers and compilers.
* emulparams/elf_nacl.sh (nacl_rodata_addr): New shell function.
(RODATA_ADDR, SHLIB_RODATA_ADDR): Use it to base the calculation
on SEGMENT_START("text-segment", ...) rather than ... alone.
* Makefile.am (earmelf_nacl.c, earmelfb_nacl.c): Add missing
dependency on $(srcdir)/emulparams/elf_nacl.sh.
* Makefile.in: Regenerate.
source.
(eelf64ppc_fbsd.c): Add rules to build this file.
* Makefile.in: Regenerate.
* configure.tgt: Add target definition for powerpc64-*-freebsd*.
Adjust powerpc-*-freebsd*.
* emultempl/ppc64elf.em: Add a mechanism to override the default
value of 0 for plt_static_chain.
* emulparams/elf32ppc_fbsd.sh (OUTPUT_FORMAT): Override the default.
* emulparams/elf64ppc_fbsd.sh (OUTPUT_FORMAT): Likewise.
(DEFAULT_PLT_STATIC_CHAIN): Define to 1.
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* archures.c: Add AVR XMEGA architecture information.
* cpu-avr.c (arch_info_struct): Likewise.
* elf32-avr.c (bfd_elf_avr_final_write_processing): Likewise.
(elf32_avr_object_p): Likewise.
/gas:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (struct avr_opcodes_s): Add opcode field.
(AVR_INSN): Change definition to match.
(avr_opcodes): Likewise, change to match.
(mcu_types): Add XMEGA architecture names and new XMEGA device names.
(md_show_usage): Add XMEGA architecture names.
(avr_operand): Add 'E' constraint for DES instruction of XMEGA devices.
Add support for SPM Z+ instruction.
* doc/c-avr.texi: Add documentation for XMEGA architectures and
devices.
/include/opcode:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* avr.h (AVR_ISA_SPMX,AVR_ISA_DES,AVR_ISA_M256,AVR_ISA_XMEGA):
New instruction set flags.
(AVR_INSN): Add new instructions for SPM Z+, DES for XMEGA.
/ld:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* Makefile.am (ALL_EMULATION_SOURCES): Add AVR XMEGA architectures.
(eavrxmega?.c): Likewise.
* configure.tgt (targ_extra_emuls): Likewise.
* emulparams/avrxmega1.sh: New file.
* emulparams/avrxmega2.sh: Likewise.
* emulparams/avrxmega3.sh: Likewise.
* emulparams/avrxmega4.sh: Likewise.
* emulparams/avrxmega5.sh: Likewise.
* emulparams/avrxmega6.sh: Likewise.
* emulparams/avrxmega7.sh: Likewise.
* emultempl/avrelf.em (avr_elf_${EMULATION_NAME}_before_allocation):
Add avrxmega6, avrxmega7 to list of architectures for no stubs.
/opcodes:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* avr-dis.c (avr_operand): Add opcode_str parameter. Check for
post-increment to support LPM Z+ instruction. Add support for 'E'
constraint for DES instruction.
(print_insn_avr): Adjust calls to avr_operand. Rename variable.
Add new linker options for marking programs to load into L1 memory
at runtime. This needs new EF flag bits, so declare them.
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
[PATCH] Add infrastructure for plugin API; functionality to follow.
include/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 1/6).
* plugin-api.h (LDPT_GNU_LD_VERSION): New ld_plugin_tag enum member.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 1/6).
* configure.in: Add AC_CHECKs for file io and dlfcn headers and
functions and AC_SEARCH for -ldl.
(enable_plugins): New shell variable set if above tests find dlopen
functionality.
(ENABLE_PLUGINS): Add related automake conditional.
* configure: Regenerate.
* config.in: Likewise.
* Makefile.am (PLUGIN_C): Declare plugin C source file, conditional
on ENABLE_PLUGINS being defined.
(PLUGIN_H): Likewise for header file.
(PLUGIN_OBJECT): Likewise for object file.
(PLUGIN_CFLAGS): Likewise -D flag required to compile plugin support.
(AM_CPPFLAGS): Use PLUGIN_CFLAGS.
(CFILES): Use PLUGIN_C.
(HFILES): Use PLUGIN_H.
(OFILES): Use PLUGIN_OBJECT.
(ld_new_SOURCES): Use PLUGIN_C.
(noinst_LTLIBRARIES)[ENABLE_PLUGINS]: Declare test plugin.
(libldtestplug_la_SOURCES)[ENABLE_PLUGINS]: Add automake definition
for test plugin.
(libldtestplug_la_CFLAGS)[ENABLE_PLUGINS]: Likewise.
(libldtestplug_la_LDFLAGS)[ENABLE_PLUGINS]: Likewise.
* Makefile.in: Regenerate.
* sysdep.h: Include stdarg.h, unistd.h and one of fcntl.h or
sys/file.h where available. Include dlfcn.h when ENABLE_PLUGINS.
(O_RDONLY): Supply default definition likewise to bfd's sysdep.h
(O_WRONLY): Likewise.
(O_RDWR): Likewise.
(O_ACCMODE): Likewise.
(O_BINARY): Likewise.
(SEEK_SET): Likewise.
(SEEK_CUR): Likewise.
(SEEK_END): Likewise.
* ldmisc.c (vfinfo): Make non-static. Add %p format char.
* ldmisc.h (vfinfo): Declare extern prototype.
* lexsup.c (enum option_values)[ENABLE_PLUGINS]: Add new entries for
OPTION_PLUGIN and OPTION_PLUGIN_OPT.
(ld_options[])[ENABLE_PLUGINS]: Add option data for the above two.
(parse_args)[ENABLE_PLUGINS]: Handle them, and load all plugins once
option parsing is complete.
* ldmain.c (main)[ENABLE_PLUGINS]: Call plugin cleanup hooks just
after lang_finish.
* plugin.c: New source file.
* plugin.h: Likewise new header.
* testplug.c: New source file.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 1/6).
* ld-bootstrap/bootstrap.exp: Skip static tests also if LD plugins
are enabled.
* lib/ld-lib.exp (proc regexp_diff): Extend verbose debug output.
(proc set_file_contents): Write a file with the supplied content.
(run_ld_link_tests): Add new 'ld' action to test linker output.
(proc check_plugin_api_available): Return true if linker under test
supports the plugin API.
* ld-plugin/func.c: New test source file.
* ld-plugin/main.c: Likewise.
* ld-plugin/text.c: Likewise.
* ld-plugin/plugin-1.d: New dump test output pattern script.
* ld-plugin/plugin-2.d: Likewise.
* ld-plugin/plugin-3.d: Likewise.
* ld-plugin/plugin-4.d: Likewise.
* ld-plugin/plugin-5.d: Likewise.
* ld-plugin/plugin.exp: New test control script.
---
[PATCH] Implement claim file and all symbols read hooks and add symbols callback.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 2/6).
* ldfile.c (ldfile_try_open_bfd)[ENABLE_PLUGINS]: Don't return early
during compat checks if they pass, instead offer any successfully
opened and accepted file to the plugin claim file hooks chain. Create
a dummy bfd to accept symbols added by the plugin, if the plugin
claims the file.
* ldlang.c (lang_process)[ENABLE_PLUGINS]: Call plugin all symbols
read hook chain before ldemul_after_open.
* ldlang.h (struct lang_input_statement_struct): Add new single-bit
'claimed' flag.
* plugin.c (IRONLY_SUFFIX): New macro for dummy bfd file suffix.
(IRONLY_SUFFIX_LEN): Length of the above string.
(plugin_get_ir_dummy_bfd): New function to create the dummy bfd used
to store symbols for ir-only files.
(is_ir_dummy_bfd): New function to check if a bfd is ir-only.
(asymbol_from_plugin_symbol): New function converts symbol formats.
(add_symbols): Call it to convert plugin syms to bfd syms and add
them to the dummy bfd.
* plugin.h: Add missing include guards.
(plugin_get_ir_dummy_bfd): Add prototype.
(is_ir_dummy_bfd): Likewise.
* testplug.c (TV_MESSAGE): New helper macro.
(struct claim_file): New struct.
(claim_file_t): New typedef.
(tag_names[]): Make static and const.
(claimfiles_list): New variable.
(claimfiles_tail_chain_ptr): Likewise.
(last_claimfile): Likewise.
(record_claim_file): Record a file to claim on a singly-linked list.
(parse_symdefstr): Parse an ASCII representation of a symbol from a
plugin option into the fields of a struct ld_plugin_symbol.
(record_claimed_file_symbol): Use it to parse plugin option for
adding a symbol.
(parse_option): Parse claim file and add symbol options.
(dump_tv_tag): Use TV_MESSAGE.
(onload): Likewise.
(onclaim_file): Make static. Use TV_MESSAGE. Scan list of files to
claim and claim this file if required, adding any symbols specified.
(onall_symbols_read): Make static and use TV_MESSAGE.
(oncleanup): Likewise.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 2/6).
* ld-plugin/plugin-3.d: Enable regexes for new functionality.
* ld-plugin/plugin-5.d: Likewise.
* ld-plugin/plugin-6.d: New testcase.
* ld-plugin/plugin-7.d: Likewise.
* ld-plugin/plugin.exp: Use 'nm' on compiled test objects to determine
whether symbols in plugin arguments need an underscore prefix. Add
new plugin-6.d and plugin-7.d testcases.
---
[PATCH] Implement get symbols callback.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 3/6).
* ldmain.c (notice)[ENABLE_PLUGINS]: Call plugin_notice.
* plugin.c (non_ironly_hash): Add new bfd hash table.
(plugin_load_plugins): Exit early if no plugins to load. If plugins
do load successfully, set notice_all flag in link info.
(get_symbols): Implement.
(plugin_load_plugins): Exit early if no plugins to load, else after
loading plugins successfully enable notice_all mode.
(init_non_ironly_hash): Lazily init non_ironly_hash table.
(plugin_notice): Record symbols referenced from non-IR files in the
non_ironly_hash. Suppress tracing, cref generation and nocrossrefs
tracking for symbols from dummy IR bfds.
* plugin.h: Fix formatting.
(plugin_notice): Add prototype.
* testplug.c (dumpresolutions): New global var.
(parse_options): Accept "dumpresolutions".
(onall_symbols_read): Get syms and dump resolutions if it was given.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 3/6).
* ld-plugin/plugin-8.d: New testcase.
* ld-plugin/plugin.exp: Invoke it.
---
[PATCH] Implement add input file, add input lib and set extra lib path callbacks.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 4/6).
* ldlang.c (lang_process)[ENABLE_PLUGINS]: Move invocation of
plugin_call_all_symbols_read to before setting of gc_sym_list, and
open any new input files that may have been added during it.
* ldmain.c (multiple_definition)[ENABLE_PLUGINS]: Call out to
plugin_multiple_definition and let it have first say over what to do
with the clashing definitions.
* plugin.c (no_more_claiming): New boolean variable.
(plugin_cached_allow_multiple_defs): Likewise.
(add_input_file): Implement.
(add_input_library): Likewise.
(set_extra_library_path): Likewise.
(plugin_call_claim_file): Don't do anything when no_more_claiming set.
(plugin_call_all_symbols_read): Set it. Disable link info
"allow_multiple_definition" flag, but cache its value.
(plugin_multiple_definition): New function.
* plugin.h (plugin_multiple_definition): Add prototype.
* testplug.c (addfile_enum_t): New enumerated typedef.
(add_file_t): New struct typedef.
(addfiles_list): New variable.
(addfiles_tail_chain_ptr): Likewise.
(record_add_file): New function.
(parse_option): Parse "add:", "lib:" and "dir:" options and call it.
(onall_symbols_read): Iterate the list of new files, libs and dirs,
adding them.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 4/6).
* ld-plugin/plugin-9.d: New testcase.
* ld-plugin/plugin.exp: Invoke it.
---
[PATCH] Add ELF symbol visibility support to plugin interface.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 5/6).
* plugin.c (asymbol_from_plugin_symbol): If the bfd is an ELF bfd,
find the elf symbol data and set the visibility in the st_other field.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 5/6).
* ld-plugin/plugin-ignore.d: New dump test control script.
* ld-plugin/plugin-vis-1.d: Likewise.
* ld-plugin/plugin.exp: Add list of ELF-only tests and run them if
testing on an ELF target.
---
[PATCH] Add archive support to plugin interface.
bfd/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 6/6).
* aoutx.h (aout_link_check_ar_symbols): Take new "subsbfd" reference
parameter and pass it when invoking add_archive_element callback.
(aout_link_check_archive_element): Handle substitute bfd if it
was set during add_archive_element callback in the above.
* cofflink.c (coff_link_check_ar_symbols): Take new "subsbfd" reference
parameter and pass it when invoking add_archive_element callback.
(coff_link_check_archive_element): Handle substitute bfd if it
was set during add_archive_element callback in the above.
* ecoff.c (read_ext_syms_and_strs): New function holds symbol-reading
code factored-out from ecoff_link_check_archive_element.
(reread_ext_syms_and_strs): Clear old symbols and call it.
(ecoff_link_check_archive_element): Use the above. Handle substitute
BFD if one is set by add_archive_element callback.
(ecoff_link_add_archive_symbols): Likewise allow bfd substitution.
* elflink.c (elf_link_add_archive_symbols): Likewise.
* linker.c (generic_link_check_archive_element): Likewise.
* pdp11.c (aout_link_check_ar_symbols): Take new "subsbfd" reference
parameter and pass it when invoking add_archive_element callback.
(aout_link_check_archive_element): Handle substitute bfd if it was
set during add_archive_element callback in the above.
* vms-alpha.c (alpha_vms_link_add_archive_symbols): Handle substitute
BFD if one is set by add_archive_element callback.
* xcofflink.c (xcoff_link_check_dynamic_ar_symbols): Take new "subsbfd"
reference parameter and pass it when invoking add_archive_element
callback.
(xcoff_link_check_ar_symbols): Likewise.
(xcoff_link_check_archive_element): Handle bfd substitution if it was
set by callback in the above.
include/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 6/6).
* bfdlink.h (struct_bfd_link_callbacks): Document new argument
to add_archive_element callback used to return a replacement bfd which
is to be added to the hash table in place of the original element.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 6/6).
* ldlang.c (load_symbols): Handle bfd subsitution when calling the
add_archive_element callback.
* ldmain.c (add_archive_element)[ENABLE_PLUGINS]: Offer the archive
member to the plugins and if claimed set "subsbfd" output parameter to
point to the dummy IR-only BFD.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 6/6).
* ld-plugin/plugin-10.d: New dump test control script.
* ld-plugin/plugin-11.d: Likewise.
* ld-plugin/plugin.exp: Run them.
---
basever_syms to global_syms.
Emit global_syms into .dynamic section for all executables and
shared objects.
(elf_solaris2_after_allocation): New function.
(LDEMUL_AFTER_ALLOCATION): Use it.
* emulparams/solaris2.sh: New file.
* emulparams/elf32_sparc_sol2.sh: Use it.
* emulparams/elf64_sparc_sol2.sh: Likewise.
* emulparams/elf_i386_sol2.sh: Likewise.
* emulparams/elf_x86_64_sol2.sh: Likewise.
* Makefile.am (eelf32_sparc_sol2.c): Depend on
$(srcdir)/emulparams/solaris2.sh.
(eelf64_sparc_sol2.c): Likewise.
(eelf_x86_64_sol2.c): Likewise.
(eelf_i386_sol2.c): Likewise.
* Makefile.in: Regenerate.
ld/:
* Makefile.am (ALL_EMULATIONS): Rewrite in terms of ...
(ALL_EMULATION_SOURCES): ... this new variable.
(ALL_64_EMULATIONS): Rewrite in terms of ...
(ALL_64_EMULATION_SOURCES): ... this new variable.
(EXTRA_ld_new_SOURCES): Rewrite in terms of the _SOURCES
variables.
(eelf32microblaze.c): Fix indentation.
* Makefile.in: Regenerate.
* configure.ac (install_as_default): Define and set to false
unless --enable-gold or --enable-gold=both/gold has been
specified.
* configure: Regenerate.
* Makefile.am (install-exec-local): Install the executable as
'ld.gold'. If install_as_default is true then also install it as
'ld'.
* Makefile.in: Regenerated.
ld:
* configure.in (install_as_default): Define and set to true
unless --enable-gold=both/gold has been specified.
* configure: Regenerate.
* Makefile.am (transform): Use ld.bfd as the default name of
the linker.
(install-exec-local): Also install the executable as a binary
named 'ld' if install_as_default is true.
* Makefile.in: Regenerate.
binutils/:
* Makefile.am (arparse.o, arlex.o, sysroff.o, defparse.o)
(deflex.o, nlmheaders.o, rcparse.o, mcparse.o): Supply correct
source file name for generated files which may be in $(srcdir).
* Makefile.in: Regenerate.
gas/:
* Makefile.am (m68k-parse.o, bfin-lex.o, itbl-lex.o, itbl-parse.o):
Supply correct source file name for generated files which may be
in $(srcdir).
* Makefile.in: Regenerate.
ld/:
* Makefile.am (ldgram.o, ldlex.o, deffilep.o): Supply correct
source file name for generated files which may be in $(srcdir).
* Makefile.in: Regenerate.
ld/:
* Makefile.am (bin_PROGRAMS): Renamed from ...
(noinst_PROGRAMS): ... this.
(transform): Override, including the renaming of ld-new to ld.
(install-exec-local): Installation of ld in $(bindir) not needed
here any more.
(AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
(MAINTAINERCLEANFILES): Add ld.1.
* Makefile.in: Regenerate.
gold/:
* Makefile.am (AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
* testsuite/Makefile.am (AUTOMAKE_OPTIONS): Add -Wno-portability.
(AM_CPPFLAGS): Renamed from ...
(INCLUDE): ... this.
* Makefile.in, testsuite/Makefile.in: Regenerate.
bfd/:
* Makefile.am (libbfd_la_LDFLAGS): Initialize early, to allow
appending.
[INSTALL_LIBBFD] (bfdlib_LTLIBRARIES, bfdinclude_HEADERS): Set
only in this condition.
[!INSTALL_LIBBFD] (noinst_LTLIBRARIES, libbfd_la_LDFLAGS): New,
to build but not install libbfd.la in this condition.
(install-bfdlibLTLIBRARIES, uninstall-bfdlibLTLIBRARIES)
(install_libbfd, install_libbfd): Remove.
* Makefile.in: Regenerate.
binutils/:
* Makefile.am (AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
(bin2c$(EXEEXT_FOR_BUILD): Adjust rule.
(installcheck-local): Renamed from ...
(installcheck): ... this.
* Makefile.in: Regenerate.
gas/:
* Makefile.am (YFLAGS): Remove, not needed any more.
(AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
* Makefile.in: Regenerate.
gprof/:
* Makefile.am (AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
* Makefile.in: Regenerate.
opcodes/:
* Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
[INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
[INSTALL_LIBBFD] (bfdinclude_DATA): New.
[!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
[!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
is built shared even if it is not to be installed.
(install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
(install_libopcodes, uninstall_libopcodes): Remove.
(AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
* Makefile.in: Regenerate.
ld/:
* Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus. Add
no-texinfo.tex, no-dist, foreign.
(TEXINFO_TEX): New variable.
(install-data-local): Removed, not needed any more.
(all): Dependencies upon info and ld.1 not needed any more.
(MKDEP, DEP, DEP1, dep.sed, dep, dep-in, dep-am): Removed.
(mkdep generated section): Removed.
(ldgram.o, ldlex.o, deffilep.o, ldmain.o, ldfile.o): Rewrite to
use automake dependency tracking mechanism.
(EXTRA_ld_new_SOURCES): Add pep-dll.c, pe-dll.c, and
$(ALL_EMULATIONS:.o=.c) $(ALL_64_EMULATIONS:.o=.c) so their
dependencies are tracked too.
(BUILT_SOURCES): New, list $(GENERATED_HFILES) to ensure they
are built early.
* configure.in: Use AM_MAINTAINER_MODE.
* configure, Makefile.in: Regenerate.
continuation backslash. Prefix first line with "A", following
lines with "B".
* Makefile.am (DEP): Don't use dep.sed here.
(DEP1): Run $MKDEP on single files, use dep.sed here on dependencies,
sort and uniq.
* Makefile.in: Regenerate.
* elf32-spu.c (struct spu_link_hash_table): Add init, line_size_log2,
num_lines_log2.
(struct got_entry): Add br_addr.
(struct call_info): Add priority.
(struct function_info): Add lr_store and sp_adjust.
(spu_elf_setup): Init line_size_log2 and num_lines_log2.
(spu_elf_find_overlays): For soft-icache, mark any section within cache
area as an overlay, and check that no other overlays exist. Look up
icache overlay manager entry sym.
(BRA_STUBS, BRA, BRASL): Define.
(enum _stub_type): Replace ovl_stub with call_ovl_stub and br*_ovl_stub.
(needs_ovl_stub): Adjust for soft-icache. Return priority encoded
in branch insn.
(count_stub, build_stub): Support soft-icache.
(build_spuear_stubs, process_stubs): Adjust build_stub call.
(spu_elf_size_stubs): Size soft-icache stubs.
(overlay_index): New function.
(spu_elf_build_stubs): Make static. Support soft-icache.
(spu_elf_check_vma): Don't turn off auto_overlay if soft-icache.
(find_function_stack_adjust): Save lr store and stack adjust insn
offsets.
(maybe_insert_function): Adjust find_function_stack_adjust call.
(mark_functions_via_relocs): Retrieve priority.
(remove_cycles): Only warn about pruned arcs when stack_analysis.
(sort_calls): Sort by priority first.
(mark_overlay_section): Ignore .ovl.init.
(sum_stack): Only print when stack_analysis.
(print_one_overlay_section): New function, extracted from..
(spu_elf_auto_overlay): ..here. Support soft-icache overlays.
(spu_elf_stack_analysis): Only print when htab->stack_analysis.
(spu_elf_final_link): Call spu_elf_stack_analysis for lrlive
analysis. Call spu_elf_build_stubs.
(spu_elf_relocate_section): For soft-icache encode overlay index
into addresses.
(spu_elf_output_symbol_hook): Support soft-icache.
(spu_elf_modify_program_headers: Likewise.
* elf32-spu.h (struct spu_elf_params): Add lrlive_analysis. Rename
num_regions to num_lines. Add line_size and max_branch.
(enum _ovly_flavour): Add ovly_soft_icache.
(spu_elf_build_stubs): Delete.
gas/
* config/tc-spu.c (md_pseudo_table): Add "brinfo".
(brinfo): New var.
(md_assemble): Poke brinfo into branch instructions.
(spu_brinfo): New function.
(md_apply_fix): Don't assume insn fields start off at zero, mask
them to remove possible brinfo.
ld/
* emultempl/spuelf.em (params): Init new fields.
(num_lines_set, line_size_set, icache_mgr, icache_mgr_stream): New vars.
(spu_place_special_section): Adjust placement for soft-icache. Pad
soft-icache section to a fixed size. Clear addr_tree.
(spu_elf_load_ovl_mgr): Support soft-icache. Map overlay manager
sections a little more intelligently.
(gld${EMULATION_NAME}_finish): Don't call spu_elf_build_stubs.
(OPTION_SPU_NUM_LINES): Rename from OPTION_SPU_NUM_REGIONS.
(OPTION_SPU_SOFT_ICACHE, OPTION_SPU_LINE_SIZE): Define.
(OPTION_SPU_LRLIVE): Define.
(PARSE_AND_LIST_LONGOPTS): Add new soft-icache options.
(PARSE_AND_LIST_OPTIONS): Likewise.
(PARSE_AND_LIST_ARGS_CASES): Handle them.
* emultempl/spu_icache.S: Dummy file.
* emultempl/spu_icache.o_c: Regenerate.
* Makefile.am (eelf32_spu.c): Depend on spu_icache.o_c.
(spu_icache.o_c): Add rule to build.
(CLEANFILES): Zap temp files.
(EXTRA_DIST): Add spu_icache.o_c.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-spu/ovl.d: Allow for absolute branches in stubs.
* ld-spu/ovl2.d: Likewise.
* ldmain.c (check_for_scripts_dir, set_scripts_dir): Delete.
(main): Don't set_scripts_dir here.
* ldfile.c (check_for_scripts_dir, find_scripts_dir): New functions,
largely based on ldmain.c versions.
(ldfile_find_command_file): Set up search in script dir here without
affecting library search.
* Makefile.am (ldmain.o): No need to define SCRIPTDIR.
(ldfile.o): New rule.
* Makefile.in: Regenerate.
bfd/
* archures.c (bfd_mach_avr25, bfd_mach_avr31, bfd_mach_avr35,
bfd_mach_avr51): New.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): Add avr25, avr31, avr35, and avr51
architectures. Change comments to match architecture comments in GCC.
(compatible): Add test for new AVR architectures.
* elf32-avr.c (bfd_elf_avr_final_write_processing): Recognize
bfd_mach_avr25, bfd_mach_avr31, bfd_mach_avr35 and bfd_mach_avr51.
(elf32_avr_object_p): Recognize E_AVR_MACH_AVR25, E_AVR_MACH_AVR31,
E_AVR_MACH_AVR35 and E_AVR_MACH_AVR51.
gas/
* config/tc-avr.c (mcu_types): Add avr25, avr31, avr35, and avr51
architectures. Reorganize list to put mcu types in correct architectures
and to order list same as in GCC. Use new ISA definitions in
include/opcode/avr.h.
* doc/c-avr.texi: Add avr25, avr31, avr35, and avr51 architecture
descriptions. Reorganize descriptions to put mcu types in correct
architectures and to order lists same as in GCC.
include/
* elf/avr.h (E_AVR_MACH_AVR25, E_AVR_MACH_AVR31,
E_AVR_MACH_AVR35, E_AVR_MACH_AVR51): Define.
(EF_AVR_MACH): Redefine to 0x7F.
* opcode/avr.h (AVR_ISA_TINY3, AVR_ISA_ALL, AVR_ISA_USB162): Remove.
(AVR_ISA_AVR3): Redefine.
(AVR_ISA_AVR1, AVR_ISA_AVR2, AVR_ISA_AVR31, AVR_ISA_AVR35,
AVR_ISA_AVR3_ALL, AVR_ISA_AVR4, AVR_ISA_AVR5, AVR_ISA_AVR51,
AVR_ISA_AVR6): Define.
ld/
* Makefile.am (ALL_EMULATIONS): Add eavr25.o, eavr31.o, eavr35.o,
and eavr51.o.
Add rules for eavr25.c, eavr31.c, eavr35.c, eavr51.c.
* Makefile.in: Regenerate.
* configure.tgt (avr-*-*, targ_extra_emuls): Add avr25, avr31, avr35
and avr51.
* emulparams/avr25.sh: New file.
* emulparams/avr31.sh: New file.
* emulparams/avr35.sh: New file.
* emulparams/avr51.sh: New file.
* emultempl/spuelf.em: No longer use `bin2c', use now `spu_ovl.o_c'.
* Makefile.am (eelf32_spu.c): Depend now on `spu_ovl.o_c'.
($(srcdir)/emultempl/spu_ovl.o_c): New target.
($(srcdir)/emultempl/spu_ovl.o): Rename to...
(spu_ovl.o): ...this one.
* Makefile.in: Regenerate.
* emultempl/spu_ovl.o_c: New file.
* emultempl/spu_ovl.o: File removed.
* configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
bug-reporting URL.
* doc/Makefile.am (config.texi): Define BUGURL.
* doc/binutils.texi: Use BUGURL. Remove text about large files
and uuencoding.
* Makefile.in, configure, doc/Makefile.in: Regenerate.
gas:
* configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
bug-reporting URL.
* doc/Makefile.am (gasver.texi): Define BUGURL.
* doc/as.texinfo: Use BUGURL.
* Makefile.in, configure, doc/Makefile.in: Regenerate.
ld:
* configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
bug-reporting URL.
* Makefile.am (ldver.texi): Define BUGURL.
* ld.texinfo: Use BUGURL.
* Makefile.in, configure: Regenerate.
to _binary_spu_ovl_o_start.
(_binary_builtin_ovl_mgr_end): Rename to _binary_spu_ovl_o_end.
(spu_elf_load_ovl_mgr): Fatal error on missing overlay manager.
* emultempl/spu_inc.s: Rename symbols.
* emultempl/spu_none.s: New file.
* emultempl/spu_ovl.S: Update copyright.
* Makefile.am (spu_inc.o): Try building with ld -r first, then
gas incbin, then build without overlay manager.
* Makefile.in: Regenerate.
* Makefile.am (eelf64bmip.c): Depend on emulparams/elf64bmip-defs.sh.
(eelf64btsmip.c, eelf64ltsmip.c): Likewise.
* Makefile.in: Regenerate.
* emulparams/elf32bmipn32-defs.sh (INITIAL_READONLY_SECTIONS): Include
.reginfo rather than .MIPS.options.
* emulparams/elf64bmip-defs.sh: New file.
* emulparams/elf64bmip.sh: Include it.
(COMMONPAGESIZE): Delete.
* emulparams/elf64btsmip.sh: As for elf64bmip.sh.
ld/testsuite/
* ld-mips-elf/branch-misc-1.d: Set the start address to 0x20000000.
* ld-mips-elf/jalbal.d: Likewise 0x200000a0.
* ld-mips-elf/jaloverflow-2.d: Likewise 0x20000000.
* ld-mips-elf/reloc-3-n32.d: Likewise.
* ld-mips-elf/reloc-3.d: Likewise.
* ld-mips-elf/textrel-1.d: Don't require a specific file offset for
.dynamic.
* emulparams/elf32xtensa.sh: Set MAXPAGESIZE here instead of including
xtensa-config.sh.
* Makefile.am (eelf32xtensa.c): Remove dependency on xtensa-config.sh.
* Makefile.in: Regenerate.
* Makefile.am: Add rules to build pe-arm-wince.lo and pei-arm-wince.lo objects.
* Makefile.in: Regenerate.
* pe-arm-wince.c: New file.
* pei-arm-wince.c: New file.
* pei-arm.c: Remove ARM_WINCE block.
* pe-arm.c: Remove ARM_WINCE block. Rename
bfd_arm_pe_allocate_interworking_sections,
bfd_arm_pe_get_bfd_for_interworking, and
bfd_arm_pe_process_before_allocation to
bfd_armpe_allocate_interworking_sections,
bfd_armpe_get_bfd_for_interworking, and
bfd_armpe_process_before_allocation. Move them before including bfd.h.
* bfd.c: ARM wince bfd format names were renamed. Adjust.
* coff-arm.c [ARM_WINCE]: Adjust so Windows CE doesn't end up with unexpected/conflicting relocs.
* targets.c: The arm-wince-pe target got its own new vector. Adjust.
* config.bfd: Likewise.
* configure.in: Likewise.
* configure: Regenerate.
binutils
* configure.in: Split arm-pe and arm-wince-pe. Build dlltool with -DDLLTOOL_ARM_WINCE for Windows CE case.
* configure: Regenerate.
* dlltool.c: Add support for arm-wince.
gas
* Makefile.am (TARG_ENV_HFILES): Add te-wince-pe.h.
* Makefile.in: Regenerate.
* config/tc-arm.h [TARGET_FORMAT]: ARM wince bfd names were renamed. Adjust.
ld
* Makefile.am: Split arm-wince into its own emulation.
* Makefile.in: Regenerate.
* configure.tgt: Set targ_emul to arm_wince_pe for ARM Windows CE targets.
* pe-dll.c : Define PE_ARCH_arm_wince.
(pe_detail_list): Add PE_ARCH_arm_wince case.
(make_one): Handle PE_ARCH_arm_epoc and PE_ARCH_arm_wince cases.
* emulparams/arm_wince_pe.sh: New file.
* emultempl/pe.em: Handle new TARGET_IS_arm_wince_pe define.
Remap bfd_arm_allocate_interworking_sections, bfd_arm_get_bfd_for_interworking and
bfd_arm_process_before_allocation for arm-pe and arm-wince-pe targets too.
(gld_${EMULATION_NAME}_recognized_file): Handle arm-wince and arm-epoc bfd format names.
2006-08-02 Richard Sandiford <richard@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
* config.bfd (sh-*-vxworks): Use bfd_elf32_shvxworks_vec and
bfd_elf32_shlvxworks_vec.
* configure.in (bfd_elf32_sh64_vec): Add elf-vxworks.lo.
(bfd_elf32_sh64l_vec, bfd_elf32_sh64lin_vec): Likewise.
(bfd_elf32_sh64blin_vec, bfd_elf32_sh64lnbsd_vec): Likewise.
(bfd_elf32_sh64nbsd_vec, bfd_elf32_sh_vec): Likewise.
(bfd_elf32_shblin_vec, bfd_elf32_shl_vec): Likewise.
(bfd_elf32_shl_symbian_vec, bfd_elf32_shlin_vec): Likewise.
(bfd_elf32_shlnbsd_vec, bfd_elf32_shnbsd_vec): Likewise.
(bfd_elf32_shlvxworks_vec, bfd_elf32_shvxworks_vec): New stanzas.
* configure: Regenerate.
* Makefile.am: Regenerate dependencies.
* Makefile.in: Regenerate.
* elf-vxworks.c (elf_vxworks_gott_symbol_p): New function.
(elf_vxworks_add_symbol_hook): Use it.
(elf_vxworks_link_output_symbol_hook): Likewise. Use the hash
table entry to check for weak undefined symbols and to obtain
the original bfd.
(elf_vxworks_emit_relocs): Use target_index instead of this_idx.
* elf32-sh-relocs.h: New file, split from elf32-sh.c.
(R_SH_DIR32): Use SH_PARTIAL32 for the partial_inplace field,
SH_SRC_MASK32 for the src_mask field, and SH_ELF_RELOC for the
special_function field.
(R_SH_REL32): Use SH_PARTIAL32 and SH_SRC_MASK32 here too.
(R_SH_REL32, R_SH_TLS_GD_32, R_SH_TLS_LD_32): Likewise.
(R_SH_TLS_LDO_32, R_SH_TLS_IE_32, R_SH_TLS_LE_32): Likewise.
(R_SH_TLS_DTPMOD32, R_SH_TLS_DTPOFF32, R_SH_TLS_TPOFF32): Likewise.
(R_SH_GOT32, R_SH_PLT32, R_SH_COPY, R_SH_GLOB_DAT): Likewise.
(R_SH_JMP_SLOT, R_SH_RELATIVE, R_SH_GOTOFF, R_SH_GOTPC): Likewise.
(SH_PARTIAL32, SH_SRC_MASK32, SH_ELF_RELOC): Undefine at end of file.
* elf32-sh.c: Include elf32-vxworks.h.
(MINUS_ONE): Define.
(sh_elf_howto_table): Include elf32-sh-relocs.h with SH_PARTIAL32
set to TRUE, SH_SRC_MASK32 set to 0xffffffff, and SH_ELF_RELOC set
to sh_elf_reloc.
(sh_vxworks_howto_table): New variable. Include elf32-sh-relocs.h
with SH_PARTIAL32 set to FALSE, SH_SRC_MASK32 set to 0, and
SH_ELF_RELOC set to bfd_elf_generic_reloc.
(vxworks_object_p, get_howto_table): New functions.
(sh_elf_reloc_type_lookup): Fix typo. Use get_howto_table.
(sh_elf_info_to_howto): Use get_howto_table.
(sh_elf_relax_section): Honor the partial_inplace field of the
R_SH_DIR32 howto.
(sh_elf_relax_delete_bytes): Likewise.
(elf_sh_plt_info): New structure.
(PLT_ENTRY_SIZE): Replace both definitions with...
(ELF_PLT_ENTRY_SIZE): ...this new macro, with separate definitions for
INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_entry_be): Update sizes of both definitions accordingly.
(elf_sh_plt0_entry_le): Likewise.
(elf_sh_plt_entry_be, elf_sh_plt_entry_le): Likewise.
(elf_sh_pic_plt_entry_be, elf_sh_pic_plt_entry_le): Likewise.
(elf_sh_plts): New structure, with separate definitions for
INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_entry): Delete both definitions.
(elf_sh_plt_entry, elf_sh_pic_plt_entry): Likewise.
(elf_sh_sizeof_plt, elf_sh_plt_plt0_offset): Likewise.
(elf_sh_plt_temp_offset, elf_sh_plt_symbol_offset): Likewise.
(elf_sh_plt_reloc_offset): Likewise.
(movi_shori_putval): Delete in favor of...
(install_plt_field): ...this new function, with separate definitions
for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(get_plt_info): New function, with separate definitions
for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_linker_offset, elf_sh_plt0_gotid_offset): Delete.
(VXWORKS_PLT_HEADER_SIZE, VXWORKS_PLT_ENTRY_SIZE): New macros.
(vxworks_sh_plt0_entry_be, vxworks_sh_plt0_entry_le): New constants.
(vxworks_sh_plt_entry_be, vxworks_sh_plt_entry_le): Likewise.
(vxworks_sh_pic_plt_entry_be, vxworks_sh_pic_plt_entry_le): Likewise.
(get_plt_index, get_plt_offset): New functions.
(elf_sh_link_hash_table): Add srelplt2, plt_info and vxworks_p fields.
(sh_elf_link_hash_table_create): Initialize them.
(sh_elf_create_dynamic_sections): Call
elf_vxworks_create_dynamic_sections for VxWorks.
(allocate_dynrelocs): Use htab->plt_info to get the size of PLT
entries. Allocate relocation entries in .rela.plt.unloaded if
generating a VxWorks executable.
(sh_elf_always_size_sections): New function.
(sh_elf_size_dynamic_sections): Extend .rela.plt handling to
.rela.plt.unloaded.
(sh_elf_relocate_section): Use get_howto_table. Honor
partial_inplace when calculating the addend for dynamic
relocations. Use get_plt_index.
(sh_elf_finish_dynamic_symbol): Use get_plt_index, install_plt_field
and htab->plt_info. Fill in the bra .plt offset for VxWorks
executables. Populate .rela.plt.unloaded. Do not make
_GLOBAL_OFFSET_TABLE_ absolute on VxWorks.
(sh_elf_finish_dynamic_sections): Use install_plt_field and
htab->plt_info. Handle cases where there is no special PLT header.
Populate the first relocation in .rela.plt.unloaded and fix up
the remaining entries.
(sh_elf_plt_sym_val): Use get_plt_info.
(elf_backend_always_size_sections): Define.
(TARGET_BIG_SYM, TARGET_BIG_NAME): Override for VxWorks.
(TARGET_LITTLE_SYM, TARGET_BIG_SYM): Likewise.
(elf32_bed, elf_backend_want_plt_sym): Likewise.
(elf_symbol_leading_char, elf_backend_want_got_underscore): Likewise.
(elf_backend_grok_prstatus, elf_backend_grok_psinfo): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing): Likewise.
(ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): Likewise.
* targets.c (bfd_elf32_shlvxworks_vec): Declare.
(bfd_elf32_shvxworks_vec): Likewise.
(_bfd_target_vector): Include bfd_elf32_shlvxworks_vec and
bfd_elf32_shvxworks_vec.
gas/
* config/tc-sh.c (apply_full_field_fix): New function.
(md_apply_fix): Use it instead of md_number_to_chars. Do not fill
in fx_addnumber for BFD_RELOC_32_PLT_PCREL.
(tc_gen_reloc): Use fx_addnumber rather than 0 as the default case.
* config/tc-sh.h (TARGET_FORMAT): Override for TE_VXWORKS.
ld/
2006-08-02 Richard Sandiford <richard@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* Makefile.am (ALL_EMULATIONS): Add eshelf_vxworks.o and
eshlelf_vxworks.o.
(eshelf_vxworks.c, eshlelf_vxworks.c): New rules.
* Makefile.in: Regenerate.
* configure.tgt (sh-*-vxworks): Use shelf_vxworks and
shlelf_vxworks.
* emulparams/shelf_vxworks.sh: New file.
* emulparams/shlelf_vxworks.sh: Likewise.
* emulparams/vxworks.sh (FINI): Prefix _etext with ${SYMPREFIX}.
(OTHER_END_SYMBOLS): Likewise _ehdr.
(DATA_END_SYMBOLS): Likewise _edata.
* emultempl/vxworks.em (vxworks_after_open): Check whether output_bfd
is indeed an ELF file before dealing with --force-dynamic.
ld/testsuite/
* ld-sh/rd-sh.exp: Treat vxworks1-static.d specially.
* ld-sh/sh-vxworks.exp: New file.
* ld-sh/sh.exp: Extend sh-linux SIZEOF_HEADERS handling to
sh-*-vxworks.
* ld-sh/vxworks1-le.dd, ld-sh/vxworks1-lib-le.dd,
* ld-sh/vxworks1-lib.dd, ld-sh/vxworks1-lib.nd,
* ld-sh/vxworks1-lib.rd, ld-sh/vxworks1-lib.s,
* ld-sh/vxworks1-static.d, ld-sh/vxworks1.dd,
* ld-sh/vxworks1.ld, ld-sh/vxworks1.rd, ld-sh/vxworks1.s,
* ld-sh/vxworks2-static.sd, ld-sh/vxworks2.s,
* ld-sh/vxworks2.sd, ld-sh/vxworks3-le.dd,
* ld-sh/vxworks3-lib-le.dd, ld-sh/vxworks3-lib.dd,
* ld-sh/vxworks3-lib.s, ld-sh/vxworks3.dd, ld-sh/vxworks3.s,
* ld-sh/vxworks4.d, ld-sh/vxworks4a.s, ld-sh/vxworks4b.s,
* ld-sh/reloc1.s, ld-sh/reloc1.d: New tests.
Daniel Jacobowitz <dan@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Zack Weinberg <zack@codesourcery.com>
Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
bfd/
* bfd-in2.h: Regenerate.
* config.bfd (mips*-*-vxworks*, mips*el-*-vxworks*): New stanzas.
* configure.in (bfd_elf32_bigmips_vxworks_vec): New stanza.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(bfd_elf32_bigmips_vec): Add elf-vxworks.lo.
(bfd_elf32_littlemips_vec): Likewise.
(bfd_elf32_nbigmips_vec): Likewise.
(bfd_elf32_nlittlemips_vec): Likewise.
(bfd_elf32_ntradbigmips_vec): Likewise.
(bfd_elf32_ntradlittlemips_vec): Likewise.
(bfd_elf32_tradbigmips_vec): Likewise.
(bfd_elf32_tradlittlemips_vec): Likewise.
(bfd_elf64_bigmips_vec): Likewise.
(bfd_elf64_littlemips_vec): Likewise.
(bfd_elf64_tradbigmips_vec): Likewise.
(bfd_elf64_tradlittlemips_vec): Likewise.
* elf32-mips.c: Include elf-vxworks.h.
(mips_info_to_howto_rel): Use elf_backend_mips_rtype_to_howto
instead of calling mips_elf32_rtype_to_howto directly.
(mips_vxworks_copy_howto_rela): New reloc howto.
(mips_vxworks_jump_slot_howto_rela): Likewise.
(mips_vxworks_bfd_reloc_type_lookup): New function.
(mips_vxworks_rtype_to_howto): Likewise.
(mips_vxworks_final_write_processing): Likewise.
(TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Override for VxWorks.
(TARGET_BIG_SYM, TARGET_BIG_NAME, elf_bed, ELF_MAXPAGESIZE): Likewise.
(elf_backend_want_got_plt): Likewise.
(elf_backend_want_plt_sym): Likewise.
(elf_backend_got_symbol_offset): Likewise.
(elf_backend_want_dynbss): Likewise.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_got_header_size: Likewise.
(elf_backend_plt_readonly): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Likewise.
(elf_backend_mips_rtype_to_howto): Likewise.
(elf_backend_adjust_dynamic_symbol): Likewise.
(elf_backend_finish_dynamic_symbol): Likewise.
(bfd_elf32_bfd_link_hash_table_create): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing: Likewise.
(elf_backend_additional_program_headers): Likewise.
(elf_backend_modify_segment_map): Likewise.
(elf_backend_symbol_processing): Likewise.
* elfxx-mips.c: Include elf-vxworks.h.
(mips_elf_link_hash_entry): Add is_relocation_target and
is_branch_target fields.
(mips_elf_link_hash_table): Add is_vxworks, srelbss, sdynbss, srelplt,
srelplt2, sgotplt, splt, plt_header_size and plt_entry_size fields.
(MIPS_ELF_RELA_SIZE, MIPS_ELF_REL_DYN_NAME): New macros.
(MIPS_RESERVED_GOTNO): Take a mips_elf_link_hash_table argument.
Return 3 for VxWorks.
(ELF_MIPS_GP_OFFSET): Change the argument from a bfd to a
mips_elf_link_hash_table. Return 0 for VxWorks.
(MIPS_ELF_GOT_MAX_SIZE): Change the argument from a bfd to a
mips_elf_link_hash_table. Update the call to ELF_MIPS_GP_OFFSET.
(mips_vxworks_exec_plt0_entry): New variable.
(mips_vxworks_exec_plt_entry): Likewise.
(mips_vxworks_shared_plt0_entry): Likewise.
(mips_vxworks_shared_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize the new hash_entry fields.
(mips_elf_rel_dyn_section): Change the bfd argument to a
mips_elf_link_hash_table. Use MIPS_ELF_REL_DYN_NAME to get
the name of the section.
(mips_elf_initialize_tls_slots): Update the call to
mips_elf_rel_dyn_section.
(mips_elf_gotplt_index): New function.
(mips_elf_local_got_index): Add an input_section argument.
Update the call to mips_elf_create_local_got_entry.
(mips_elf_got_page): Likewise.
(mips_elf_got16_entry): Likewise.
(mips_elf_create_local_got_entry): Add bfd_link_info and input_section
arguments. Create dynamic relocations for each entry on VxWorks.
(mips_elf_merge_gots): Update the use of MIPS_ELF_GOT_MAX_SIZE.
(mips_elf_multi_got): Update the uses of MIPS_ELF_GOT_MAX_SIZE
and MIPS_RESERVED_GOTNO.
(mips_elf_create_got_section): Update the uses of
MIPS_ELF_GOT_MAX_SIZE. Create .got.plt on VxWorks.
(is_gott_symbol): New function.
(mips_elf_calculate_relocation): Use a dynobj local variable.
Update the calls to mips_elf_local_got_index, mips_elf_got16_entry and
mips_elf_got_page_entry. Set G to the .got.plt entry when calculating
VxWorks R_MIPS_CALL* relocations. Calculate and use G for all GOT
relocations on VxWorks. Add dynamic relocations for references
to the VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Don't
create dynamic relocations for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64
in VxWorks executables.
(mips_elf_allocate_dynamic_relocations): Add a bfd_link_info argument.
Use MIPS_ELF_RELA_SIZE to calculate the size of a VxWorks entry.
Don't allocate a null entry on VxWorks.
(mips_elf_create_dynamic_relocation): Update the call to
mips_elf_rel_dyn_section. Use absolute rather than relative
relocations for VxWorks, and make them RELA rather than REL.
(_bfd_mips_elf_create_dynamic_sections): Don't make .dynamic
read-only on VxWorks. Update the call to mips_elf_rel_dyn_section.
Create the .plt, .rela.plt, .dynbss and .rela.bss sections on
VxWorks. Likewise create the _PROCEDURE_LINKAGE_TABLE symbol.
Call elf_vxworks_create_dynamic_sections for VxWorks and
initialize the plt_header_size and plt_entry_size fields.
(_bfd_mips_elf_check_relocs): Don't allow GOT relocations to be
used in VxWorks executables. Don't allocate dynamic relocations
for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 in VxWorks executables.
Set is_relocation_target for each symbol referenced by a relocation.
Allocate .rela.dyn entries for relocations against the special
VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Create GOT
entries for all VxWorks R_MIPS_GOT16 relocations. Don't allocate
a global GOT entry for symbols mentioned in VxWorks R_MIPS_CALL*,
R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 relocations. Update the calls
to mips_elf_rel_dyn_section and mips_elf_allocate_dynamic_relocations.
Set is_branch_target for symbols mentioned in R_MIPS_PC16 or R_MIPS_26
relocations. Don't set no_fn_stub on VxWorks.
(_bfd_mips_elf_adjust_dynamic_symbol): Update the call to
mips_elf_allocate_dynamic_relocations.
(_bfd_mips_vxworks_adjust_dynamic_symbol): New function.
(_bfd_mips_elf_always_size_sections): Do not allocate GOT page
entries for VxWorks, and do not create multiple GOTs.
(_bfd_mips_elf_size_dynamic_sections): Use MIPS_ELF_REL_DYN_NAME.
Handle .got specially for VxWorks. Update the uses of
MIPS_RESERVED_GOTNO and mips_elf_allocate_dynamic_relocations.
Check for sgotplt and splt. Allocate the .rel(a).dyn contents last,
once its final size is known. Set DF_TEXTREL for VxWorks. Add
DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL, DT_PLTRELSZ and DT_JMPREL
tags on VxWorks. Do not add the MIPS-specific tags for VxWorks.
(_bfd_mips_vxworks_finish_dynamic_symbol): New function.
(mips_vxworks_finish_exec_plt): Likewise.
(mips_vxworks_finish_shared_plt): Likewise.
(_bfd_mips_elf_finish_dynamic_sections): Remove an unncessary call
to mips_elf_rel_dyn_section. Use a VxWorks-specific value of
DT_PLTGOT. Handle DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL,
DT_PLTRELSZ and DT_JMPREL. Update the uses of MIPS_RESERVED_GOTNO
and mips_elf_rel_dyn_section. Use a different GOT header for
VxWorks. Don't sort .rela.dyn on VxWorks. Finish the PLT on VxWorks.
(_bfd_mips_elf_link_hash_table_create): Initialize the new
mips_elf_link_hash_table fields.
(_bfd_mips_vxworks_link_hash_table_create): New function.
(_bfd_mips_elf_final_link): Set the GP value to _GLOBAL_OFFSET_TABLE_
on VxWorks. Update the call to ELF_MIPS_GP_OFFSET.
* elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Declare.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_vxworks_link_hash_table_create): Likewise.
* libbfd.h: Regenerate.
* Makefile.am (elfxx-mips.lo): Depend on elf-vxworks.h.
(elf32-mips.lo): Likewise.
* Makefile.in: Regenerate.
* reloc.c (BFD_RELOC_MIPS_COPY, BFD_RELOC_MIPS_JUMP_SLOT): Declare.
* targets.c (bfd_elf32_bigmips_vxworks_vec): Declare.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(_bfd_target_vector): Add entries for them.
gas/
* config/tc-mips.c (mips_target_format): Handle vxworks targets.
(md_begin): Complain about -G being used for PIC. Don't change
the text, data and bss alignments on VxWorks.
(reloc_needs_lo_p): Don't return true for R_MIPS_GOT16 when
generating VxWorks PIC.
(load_address): Extend SVR4_PIC handling to VXWORKS_PIC.
(macro): Likewise, but do not treat la $25 specially for
VxWorks PIC, and do not handle jal.
(OPTION_MVXWORKS_PIC): New macro.
(md_longopts): Add -mvxworks-pic.
(md_parse_option): Don't complain about using PIC and -G together here.
Handle OPTION_MVXWORKS_PIC.
(md_estimate_size_before_relax): Always use the first relaxation
sequence on VxWorks.
* config/tc-mips.h (VXWORKS_PIC): New.
gas/testsuite/
* gas/mips/vxworks1.s, gas/mips/vxworks1.d,
* gas/mips/vxworks1-xgot.d: New tests.
* gas/mips/mips.exp: Run them. Do not run other tests on VxWorks.
include/elf/
* mips.h (R_MIPS_COPY, R_MIPS_JUMP_SLOT): New relocs.
ld/
* configure.tgt (mips*el-*-vxworks*, mips*-*-vxworks*): Use
separate VxWorks emulations.
* emulparams/elf32ebmipvxworks.sh: New file.
* emulparams/elf32elmipvxworks.sh: New file.
* Makefile.am (ALL_EMULATIONS): Add eelf32ebmipvxworks.o and
eelf32elmipvxworks.o.
(eelf32ebmipvxworks.c, eelf32elmipvxworks.c): New rules.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-mips/vxworks1.dd, ld-mips/vxworks1.ld, ld-mips/vxworks1-lib.dd,
* ld-mips/vxworks1-lib.nd, ld-mips/vxworks1-lib.rd,
* ld-mips/vxworks1-lib.s, ld-mips/vxworks1.rd, ld-mips/vxworks1.s,
* ld-mips/vxworks1-static.d, ld-mips/vxworks2.s, ld-mips/vxworks2.sd,
* ld-mips/vxworks2-static.sd: New tests.
* ld-mips/mips-elf.exp: Run them.
* configure.in (bfd_elf32_bigarm_vec): Include elf-vxworks.lo.
(bfd_elf32_bigarm_symbian_vec): Likewise.
(bfd_elf32_bigarm_vxworks_vec): Likewise.
(bfd_elf32_littlearm_vec): Likewise.
(bfd_elf32_littlearm_symbian_vec): Likewise.
(bfd_elf32_littlearm_vxworks_vec): Likewise.
* configure: Regenerate.
* elf32-arm.c: Include libiberty.h and elf-vxworks.h.
(RELOC_SECTION, RELOC_SIZE, SWAP_RELOC_IN, SWAP_RELOC_OUT): New macros.
(elf32_arm_vxworks_bed): Add forward declaration.
(elf32_arm_howto_table_1): Fix the masks for R_ASM_ABS12.
(elf32_arm_vxworks_exec_plt0_entry): New table.
(elf32_arm_vxworks_exec_plt_entry): Likewise.
(elf32_arm_vxworks_shared_plt_entry): Likewise.
(elf32_arm_link_hash_table): Add vxworks_p and srelplt2 fields.
(reloc_section_p): New function.
(create_got_section): Use RELOC_SECTION.
(elf32_arm_create_dynamic_sections): Likewise. Call
elf_vxworks_create_dynamic_sections for VxWorks targets.
Choose between the two possible values of plt_header_size
and plt_entry_size.
(elf32_arm_link_hash_table_create): Initialize vxworks_p and srelplt2.
(elf32_arm_abs12_reloc): New function.
(elf32_arm_final_link_relocate): Call it. Allow the creation of
dynamic R_ARM_ABS12 relocs on VxWorks. Use reloc_section_p,
RELOC_SIZE, SWAP_RELOC_OUT and RELOC_SECTION. Initialize the
r_addend fields of relocs. On rela targets, skip any code that
adjusts in-place addends. When using _bfd_link_final_relocate
to perform a final relocation, pass rel->r_addend as the addend
argument.
(elf32_arm_merge_private_bfd_data): If one of the bfds is a VxWorks
object, ignore flags that are not standard on VxWorks.
(elf32_arm_check_relocs): Allow the creation of dynamic R_ARM_ABS12
relocs on VxWorks. Use reloc_section_p.
(elf32_arm_adjust_dynamic_symbol): Use RELOC_SECTION and RELOC_SIZE.
(allocate_dynrelocs): Use RELOC_SIZE. Account for the size of
.rela.plt.unloaded relocs on VxWorks targets.
(elf32_arm_size_dynamic_sections): Use RELOC_SIZE. Check for
.rela.plt.unloaded as well as .rel(a).plt. Add DT_RELA* tags
instead of DT_REL* tags on RELA targets.
(elf32_arm_finish_dynamic_symbol): Use RELOC_SECTION, RELOC_SIZE
and SWAP_RELOC_OUT. Initialize r_addend fields. Handle VxWorks
PLT entries. Do not make _GLOBAL_OFFSET_TABLE_ absolute on VxWorks.
(elf32_arm_finish_dynamic_sections): Use RELOC_SECTION, RELOC_SIZE
and SWAP_RELOC_OUT. Initialize r_addend fields. Handle DT_RELASZ
like DT_RELSZ. Handle the VxWorks form of initial PLT entry.
Correct the .rela.plt.unreloaded symbol indexes.
(elf32_arm_output_symbol_hook): Call the VxWorks version of this
hook on VxWorks targets.
(elf32_arm_vxworks_link_hash_table_create): Set vxworks_p to true.
Minor formatting tweak.
(elf32_arm_vxworks_final_write_processing): New function.
(elf_backend_add_symbol_hook): Override for VxWorks and reset
for Symbian.
(elf_backend_final_write_processing): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_want_plt_sym): Likewise.
(ELF_MAXPAGESIZE): Likewise.
(elf_backend_may_use_rel_p): Minor formatting tweak.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_rela_normal): Likewise.
* Makefile.in (elf32-arm.lo): Depend on elf-vxworks.h.
gas/
* config/tc-arm.c (md_apply_fix): Install a value of zero into a
BFD_RELOC_ARM_OFFSET_IMM field if we're going to generate a RELA
R_ARM_ABS12 reloc.
(tc_gen_reloc): Keep the original fx_offset for RELA pc-relative
relocs, but adjust by md_pcrel_from_section. Create R_ARM_ABS12
relocations for BFD_RELOC_ARM_OFFSET_IMM on RELA targets.
gas/testsuite/
* gas/arm/abs12.s, gas/arm/abs12.d: New test.
* gas/arm/pic.d: Skip for *-*-vxworks*...
* gas/arm/pic_vxworks.d: ...use this version instead.
* gas/arm/unwind_vxworks.d: Fix expected output.
ld/
* emulparams/armelf_vxworks.sh: Include vxworks.sh.
(MAXPAGESIZE): Define.
* emulparams/vxworks.sh: Undefine.
* Makefile.am (earmelf_vxworks.c): Depend on vxworks.sh and vxworks.em.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-arm/vxworks1.dd, ld-arm/vxworks1.ld, ld-arm/vxworks1-lib.dd,
* ld-arm/vxworks1-lib.nd, ld-arm/vxworks1-lib.rd,
* ld-arm/vxworks1-lib.s, ld-arm/vxworks1.rd, ld-arm/vxworks1.s,
* ld-arm/vxworks1-static.d, ld-arm/vxworks2.s, ld-arm/vxworks2.sd,
* ld-arm/vxworks2-static.sd: New tests.
* ld-arm/arm-elf.exp: Run them.
* elf32-ppc.c (ppc_elf_plt_type): New enumeration.
(ppc_elf_link_hash_table): Replace old_got and new_got with
plt_type and can_use_new_plt.
(ppc_elf_create_dynamic_sections): Add SEC_HAS_CONTENTS,
SEC_LOAD and SEC_READONLY to the VxWorks .plt flags.
(ppc_elf_check_relocs): Set can_use_new_plt instead of new_plt.
Move from plt_type == PLT_UNSET to PLT_OLD instead of setting old_plt.
(ppc_elf_select_plt_layout): Move from plt_type == PLT_UNSET to
either plt_type == PLT_OLD or plt_type == PLT_NEW. Assert that
this function should not be called for VxWorks targets.
(ppc_elf_tls_setup): Use plt_type instead of old_got.
(allocate_got): Likewise. Rearrange so that max_before_header
is only used for PLT_OLD and PLT_NEW.
(allocate_dynrelocs): Use plt_type instead of old_got and is_vxworks.
(ppc_elf_size_dynamic_sections): Likewise.
(ppc_elf_relax_section): Likewise.
(ppc_elf_relocate_section): Likewise.
(ppc_elf_finish_dynamic_symbol): Likewise.
(ppc_elf_vxworks_link_hash_table_create): Initialize plt_type.
ld/
* emulparams/elf32ppccommon.sh: New file, extracted from...
* emulparams/elf32ppc.sh: ...here.
* emulparams/elf32ppcvxworks.sh: Include elf32ppccommon.sh
instead of elf32ppc.sh.
(BSS_PLT): Remove override.
* Makefile.am (eelf32lppc.c): Depend on elf32ppccommons.h.
(eelf32lppcnto.c, eelf32lppcsim.c, eelf32ppcnto.c): Likewise.
(eelf32ppc.c, eelf32ppc_fbsd.c, eelf32ppcsimm): Likewise.
(eelf32ppclinux.c): Likewise.
(eelf32ppcvxworks.c): Likewise. Add missing vxworks.sh dependency.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-powerpc/vxworks1-lib.s, ld-powerpc/vxworks1-lib.dd,
* ld-powerpc/vxworks1-lib.rd, ld-powerpc/vxworks1.s,
* ld-powerpc/vxworks1.dd, ld-powerpc/vxworks1.rd,
* ld-powerpc/vxworks1.ld, ld-powerpc/vxworks1.sd: New test.
* ld-powerpc/powerpc.exp: Run it.
for manual pages.
* Makefile.am (gprof.info, gprof.1): Depend on config.texi.
(config.texi): New file.
* Makefile.in: Regenerated.
* Makefile.am (configdoc.texi): Set top_srcdir in configdoc.texi..
* Makefile.in: Regenerated.
* ld.texinfo: Include configdoc.texi and ldver.texi in man pages.
Add @file documentation.
2005-07-14 Jim Blandy <jimb@redhat.com>
* configure.in: Add cases for Renesas m32c.
* configure: Regenerated.
bfd/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for m32c-*-elf (Renesas m32c and m16c).
* Makefile.am (ALL_MACHINES): Add cpu-m32c.lo.
(ALL_MACHINES_CFILES): Add cpu-m32c.c.
(BFD32_BACKENDS): Add elf32-m32c.lo.
(BFD32_BACKENDS_CFILES): Add elf32-m32c.c.
(cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'.
* Makefile.in: Regenerated.
* archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New
arch and mach codes.
(bfd_m32c_arch): New arch info object.
(bfd_archures_list): List bfd_m32c_arch.
* bfd-in2.h: Regenerated.
* config.bfd: Add case for the m32c.
* configure.in: Add case for the m32c.
* configure: Regenerated.
* cpu-m32c.c, elf32-m32c.c: New files.
* libbfd.h: Regenerated.
* targets.c (bfd_elf32_m32c_vec): Declare.
(_bfd_target_vector): List bfd_elf32_m32c_vec.
binutils/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* readelf.c: #include "elf/m32c.h"
(guess_is_rela, dump_relocations, get_machine_name): Add cases for
EM_M32C.
* Makefile.am (readelf.o): Update dependencies.
* Makefile.in: Regenerated.
cpu/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* m32c.cpu, m32c.opc: Machine description for the Renesas M32C.
gas/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C.
* Makefile.am (CPU_TYPES): List m32c.
(TARGET_CPU_CFILES): List config/tc-m32c.c.
(TARGET_CPU_HFILES): List config/tc-m32c.h.
* configure.in: Add case for m32c.
* configure.tgt: Add cases for m32c and m32c-*-elf.
* configure: Regenerated.
* config/tc-m32c.c, config/tc-m32c.h: New files.
* doc/Makefile.am (CPU_DOCS): Add c-m32c.texi.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set M32C.
* doc/as.texinfo: Add text for the M32C-specific options and line
comment characters, and refer to c-m32c.texi.
* doc/c-m32c.texi: New file.
include/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* dis-asm.h (print_insn_m32c): New declaration.
include/elf/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for Renesas M32C and M16C.
* common.h (EM_M32C): New machine number.
* m32c.h: New file.
ld/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o.
(eelf32m32c.c): New target.
* Makefile.in: Regenerated.
* configure.tgt: Add case for m32c-*-elf.
* emulparams/elf32m32c.sh: New file.
opcodes/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New.
* m32c-desc.h, m32c-opc.h: New.
* Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h.
(CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c,
m32c-opc.c.
(ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo,
m32c-ibld.lo, m32c-opc.lo.
(CLEANFILES): List stamp-m32c.
(M32C_DEPS): List stamp-m32c, if CGEN_MAINT.
(CGEN_CPUS): Add m32c.
(m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c)
(m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS.
(m32c_opc_h): New variable.
(stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo)
(m32c-opc.lo): New rules.
* Makefile.in: Regenerated.
* configure.in: Add case for bfd_m32c_arch.
* configure: Regenerated.
* disassemble.c (ARCH_m32c): New.
[ARCH_m32c]: #include "m32c-desc.h".
(disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c.
(disassemble_init_for_target) [ARCH_m32c]: Same.
* cgen-ops.h, cgen-types.h: New files.
* Makefile.am (HFILES): List them.
* Makefile.in: Regenerated.
* gas/Makefile.am: Have 'all' depend on 'info'.
* ld/Makefile.am: Have 'all' depend on 'info' and 'ld.1'.
* bfd/Makefile.in, binutils/Makefile.in, gas/Makefile.in
* ld/Makefile.in: Regenerate.
