mips_fix_loongson2f_jump): New variables.
(md_longopts): Add New options -mfix-loongson2f-nop/jump,
-mno-fix-loongson2f-nop/jump.
(md_parse_option): Initialize variables via above options.
(options): New enums for the above options.
(md_begin): Initialize nop_insn from LOONGSON2F_NOP_INSN.
(fix_loongson2f, fix_loongson2f_nop, fix_loongson2f_jump):
New functions.
(append_insn): call fix_loongson2f().
(mips_handle_align): Replace the implicit nops.
* config/tc-mips.h (MAX_MEM_FOR_RS_ALIGN_CODE): Modified
for the new mips_handle_align().
* doc/c-mips.texi: Document the new options.
* gas/mips/loongson-2f-2.s: New test of -mfix-loongson2f-nop.
* gas/mips/loongson-2f-2.d: Likewise.
* gas/mips/loongson-2f-3.s: New test of -mfix-loongson2f-jump.
* gas/mips/loongson-2f-3.d: Likewise.
* gas/mips/mips.exp: Run the new tests.
* opcode/mips.h (LOONGSON2F_NOP_INSN): New macro.
match the order elsewhere. Add -mfix-vr4120/-mno-fix-vr4120 and
-mfix-vr4130/-mno-fix-vr4130.
* doc/c-mips.texi (MIPS Opts): Correct -no-mfix-vr4120 to
-mno-fix-vr4120 and -no-mfix-vr4130 to -mno-fix-vr4130.
New statics.
(OPTION_ELF_BASE): Make room for new option macros.
(OPTION_SOFT_FLOAT, OPTION_HARD_FLOAT, OPTION_SINGLE_FLOAT,
OPTION_DOUBLE_FLOAT): New option macros.
(md_longopts): Add msoft-float, mhard-float, msingle-float and
mdouble-float.
(md_parse_option): Handle OPTION_SINGLE_FLOAT,
OPTION_DOUBLE_FLOAT, OPTION_SOFT_FLOAT and OPTION_HARD_FLOAT.
(md_show_usage): Add -msoft-float, -mhard-float, -msingle-float
and -mdouble-float.
(struct mips_set_options): New fields soft_float and single_float.
(mips_opts): Initialized them. Add comment for each field
initializer.
(mips_after_parse_args): Set them based on file_mips_soft_float
and file_mips_single_float.
(s_mipsset): Add support for `.set softfloat', `.set hardfloat',
`.set singlefloat' and `.set doublefloat'.
(is_opcode_valid): New function to invoke OPCODE_IS_MEMBER.
Handle single-float and soft-float instructions here.
(macro_build, mips_ip): Use it instead of OPCODE_IS_MEMBER.
(is_opcode_valid_16): New function.
(mips16_ip): Use it instead of OPCODE_IS_MEMBER.
(macro) <M_LDC1_AB, M_SDC1_AB, M_L_DOB, M_L_DAB, M_S_DAB,
M_S_DOB>: Remove special-casing of r4650.
* doc/c-mips.texi (-march=): Add Octeon.
(MIPS Opts): Document -msoft-float and -mhard-float. Document
-msingle-float and -mdouble-float.
(MIPS floating-point): New section. Document `.set softfloat' and
`.set hardfloat'. Document `.set singlefloat' and `.set
doublefloat'.
* config/tc-mips.c (mips_cpu_info_table): Add new entries for
{24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2.
Deprecate *x and *fx.
* doc/c-mips.texi: Document the new CPU arguments. Deprecate
*x and *fx.
* doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
* doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
* config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
* config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
(macro_build): Add case '2'.
(macro): Expand M_BALIGN to nop, packrl.ph or balign.
(validate_mips_insn): Add support for balign instruction.
(mips_ip): Handle DSP R2 instructions. Support balign instruction.
(OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
command line options.
(s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
(md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
* doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
.set dspr2, .set nodspr2.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dspr2.s, gas/mips/mips32-dspr2.d: New test for
DSP R2.
* gas/mips/mips.exp: Run new test.
[ include/opcode/Changelog ]
* mips.h (OP_SH_BP, OP_MASK_BP): Add support for balign instruction.
(INSN_DSPR2): Add flag for DSP R2 instructions.
(M_BALIGN): New macro.
[ opcodes/ChangeLog ]
* mips-dis.c (mips_arch_choices): Add DSP R2 support.
(print_insn_args): Add support for balign instruction.
* mips-opc.c (D33): New shortcut for DSP R2 instructions.
(mips_builtin_opcodes): Add DSP R2 instructions.
[ sim/mips/ChangeLog ]
* Makefile.in (IGEN_INCLUDE): Add dsp2.igen.
* configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*):
Add dsp2 to sim_igen_machine.
* configure: Regenerate.
* dsp.igen (do_ph_op): Add MUL support when op = 2.
(do_ph_mulq): New function to support mulq_rs.ph and mulq_s.ph.
(mulq_rs.ph): Use do_ph_mulq.
(MFHI, MFLO, MTHI, MTLO): Move these instructions to mips.igen.
* mips.igen: Add dsp2 model and include dsp2.igen.
(MFHI, MFLO, MTHI, MTLO): Extend these instructions for
for *mips32r2, *mips64r2, *dsp.
(MADD, MADDU, MSUB, MSUBU, MULT, MULTU): Extend these instructions
for *mips32r2, *mips64r2, *dsp2.
* dsp2.igen: New file for MIPS DSP REV 2 ASE.
[ sim/testsuite/sim/mips/ChangeLog ]
* basic.exp: Run the dsp2 test.
* utils-dsp.inc (dspckacc_astio, dspck_tsimm): New macro.
* mips32-dsp2.s: New test.
* config/tc-mips.c (ISA_SUPPORTS_SMARTMIPS): Rename.
(ISA_SUPPORTS_DSP_ASE, ISA_SUPPORTS_MT_ASE, ISA_HAS_64BIT_FPRS,
ISA_HAS_MXHC1): New macros.
(HAVE_32BIT_FPRS): Use ISA_HAS_64BIT_FPRS instead of
ISA_HAS_64BIT_REGS. Formatting fixes. Improved comments.
(mips_cpu_info): Change to use combined ASE/IS_ISA flag.
(MIPS_CPU_IS_ISA, MIPS_CPU_ASE_SMARTMIPS, MIPS_CPU_ASE_DSP,
MIPS_CPU_ASE_MT, MIPS_CPU_ASE_MIPS3D, MIPS_CPU_ASE_MDMX): New defines.
(mips_after_parse_args): Change default handling of float register
size to account for 32bit code with 64bit FP. Better sanity checking
of ISA/ASE/ABI option combinations.
(s_mipsset): Support switching of GPR and FPR sizes via
.set {g,f}p={32,64,default}. Better sanity checking for .set ASE
options.
(mips_elf_final_processing): We should record the use of 64bit FP
registers in 32bit code but we don't, because ELF header flags are
a scarce ressource.
(mips_cpu_info_table): Add ASE flags for CPUs with mandatory ASE
extensions. Add 4ksc, 4kec, 4kem, 4kep, 4ksd, m4kp, 24kec, 24kef,
24kex, 34kc, 34kf, 34kx, 25kf CPU definitions.
(mips_cpu_info_from_isa): Use MIPS_CPU_IS_ISA.
* doc/c-mips.texi: Document .set {g,f}p={32,64,default}. Document
missing -march options. Document .set arch=CPU. Move .set smartmips
to ASE page. Use @code for .set FOO examples.
[ gas/testsuite/Changelog ]
* gas/mips/mips-gp32-fp64-pic.d, mips/mips-gp32-fp64.d,
gas/mips/mips-gp64-fp32-pic.d, gas/mips/mips-gp64-fp32.l,
gas/mips/mips-gp64-fp64.d: Adjust test cases to the changes assembler
output.
* gas/mips/mips-gp32-fp64.l, gas/mips/mips-gp64-fp32-pic.l: New files,
catch assembler warnings.
(mips_opts): Add -1 to initialize ase_mt.
(file_ase_mt): New variable for -mmt.
(CPU_HAS_MT): New define.
(validate_mips_insn): Add supports for +t, +T, !, $, *, &, g operand
formats.
(mips_ip): Check ase_mt to enable MT instructions.
Handle !, $, *, &, +T, +t, g operand formats.
For "mftc1", "mfthc1", "cftc1", "mttc1", "mtthc1", "cttc1", we allow
odd float registers.
(OPTION_MT, OPTION_NO_MT): New define.
(OPTION_COMPAT_ARCH_BASE): Change because of inserting MT define.
(md_parse_option): Parse OPTION_MT and OPTION_NO_MT.
(mips_after_parse_args): Set ase_mt based on CPU.
(s_mipsset): Handle ".set mt" and ".set nomt".
(mips_elf_final_processing): Remind of adding new flag for MT ASE.
(md_show_usage): Show usage of -mmt and -mno-mt.
* doc/as.texinfo: Document -mmt and -mno-mt options.
* doc/c-mips.texi: Likewise, and document ".set mt" and ".set nomt"
directives.
(MAX_NOPS): Bump to 4.
(mips_fix_vr4130): New variable.
(nops_for_vr4130): New function.
(nops_for_insn): Use MAX_DELAY_NOPS rather than MAX_NOPS. Use
nops_for_vr4130 if working around VR4130 errata.
(OPTION_FIX_VR4130, OPTION_NO_FIX_VR4130): New macros.
(md_longopts): Add -mfix-vr4130 and -mno-fix-vr4130.
(md_parse_option): Handle them.
(md_show_usage): Print them.
* doc/c-mips.texi: Document -mfix-vr4130 and -mno-fix-vr4130.
(mips_opts): Initialize it.
(HAVE_32BIT_ADDRESSES): Set to true if pointers are 32 bits wide.
(HAVE_64BIT_ADDRESSES): Redefine as !HAVE_32BIT_ADDRESSES.
(HAVE_32BIT_SYMBOLS, HAVE_64BIT_SYMBOLS): New macros.
(load_address): Use HAVE_64BIT_SYMBOLS instead of HAVE_64BIT_ADDRESSES
when deciding whether to use a symbolic %highest/%higher expansion.
(macro): Likewise. Remove o64/n32 linux hack. Always use
ADDRESS_ADD*_INSN for address addition in the expansion of "dla"
and "la". Handle constants separately from symbolic expressions in
the "ld_st:" case, using 64-bit arithmetic if HAVE_64BIT_ADDRESSES
and using load_register to load the high part of the address.
(OPTION_MSYM32, OPTION_NO_MSYM32): New macros.
(OPTION_ELF_BASE): Bump by 2.
(md_longopts): Add entries for -msym32 and -mno-sym32.
(md_parse_option): Handle them.
(usage): Document them.
(s_mipsset): Handle ".set sym32" and ".set nosym32".
(s_cpload, s_cpsetup): Use HAVE_64BIT_SYMBOLS instead of
HAVE_64BIT_ADDRESSES to detect 64-bit values of "_gp".
* doc/c-mips.texi: Document ".set sym32", ".set nosym32",
-msym32 and -mno-sym32.
2003-01-02 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c: Update copyright years to include 2003.
(mips_ip): Fix indentation of "+A", "+B", and "+C" handling.
Additionally, clean up their code slightly and clean up their
comments some more.
* doc/c-mips.texi: Add MIPS32r2 to ".set mipsN" documentation.
[ gas/testsuite/ChangeLog ]
2003-01-02 Chris Demetriou <cgd@broadcom.com>
* gas/mips/elf_arch_mips32r2.d: Fix file description comment.
[ include/opcode/ChangeLog ]
2003-01-02 Chris Demetriou <cgd@broadcom.com>
* mips.h: Update copyright years to include 2002 (which had
been missed previously) and 2003. Make comments about "+A",
"+B", and "+C" operand types more descriptive.
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* aoutx.h (NAME(aout,machine_type)): Add bfd_mach_mipsisa32r2 case.
* archures.c (bfd_mach_mipsisa32r2): New define.
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsisa32r2): New enum value.
(arch_info_struct): Add entry for I_mipsisa32r2.
* elfxx-mips.c (elf_mips_isa, _bfd_elf_mips_mach)
(_bfd_mips_elf_print_private_bfd_data): Handle E_MIPS_ARCH_32R2.
(_bfd_mips_elf_final_write_processing): Add
bfd_mach_mipsisa32r2 case.
(_bfd_mips_elf_merge_private_bfd_data): Handle merging of
binaries marked as using MIPS32 Release 2.
[ binutils/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* doc/binutils.texi (objdump): Note MIPS HWR (Hardware Register)
changes in MIPS -M options.
[ gas/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* configure.in: Recognize mipsisa32r2, mipsisa32r2el, and
CPU variants.
* configure: Regenerate.
* config/tc-mips.c (ISA_HAS_DROR, ISA_HAS_ROR): New defines.
(macro_build): Handle "K" operand.
(macro2): Use ISA_HAS_DROR and ISA_HAS_ROR in the places where
CPU_HAS_DROR and CPU_HAS_ROR are currently used.
(mips_ip): New variable "lastpos", and implement "+A", "+B",
and "+C" operands for MIPS32 Release 2 ins/ext instructions.
Implement "K" operand for MIPS32 Release 2 rdhwr instruction.
(validate_mips_insn): Implement "+" as a way to extend the
allowed operands, and implement "K", "+A", "+B", and "+C"
operands.
(OPTION_MIPS32R2): New define.
(md_longopts): Add entry for OPTION_MIPS32R2.
(OPTION_ELF_BASE): Adjust to accomodate OPTIONS_MIPS32R2.
(md_parse_option): Handle OPTION_MIPS32R2.
(s_mipsset): Reimplement handling of ".set mipsN" options
and add support for ".set mips32r2".
(mips_cpu_info_table): Add entry for "mips32r2" (MIPS32 Release 2).
(md_show_usage): Document "-mips32r2" option.
* doc/as.texinfo: Document "-mips32r2" option.
* doc/c-mips.texi: Likewise.
[ gas/testsuite/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0-names-mips32r2.d: New test.
* gas/mips/hwr-names-mips32r2.d: New test.
* gas/mips/hwr-names-numeric.d: New test.
* gas/mips/hwr-names.s: New test source file.
* gas/mips/mips32r2.d: New test.
* gas/mips/mips32r2.s: New test source file.
* gas/mips/mips32r2-ill.l: New test.
* gas/mips/mips32r2-ill.s: New test source file.
* gas/mips/mips.exp: Add mips32r2 architecture data array
entry. Run new tests mentioned above.
[ include/elf/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h (E_MIPS_ARCH_32R2): New define.
[ include/opcode/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h: Document "+" as the start of two-character operand
type names, and add new "K", "+A", "+B", and "+C" operand types.
(OP_MASK_INSMSB, OP_SH_INSMSB, OP_MASK_EXTMSB)
(OP_SH_EXTMSB, INSN_ISA32R2, ISA_MIPS32R2, CPU_MIPS32R2): New
defines.
[ opcodes/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0_names_mips3264r2, mips_hwr_names_numeric)
(mips_hwr_names_mips3264r2): New arrays.
(mips_arch_choice): New "hwr_names" member.
(mips_arch_choices): Adjust for structure change, and add a new
entry for "mips32r2" ISA.
(mips_hwr_names): New variable.
(set_default_mips_dis_options): Set mips_hwr_names.
(parse_mips_dis_option): New "hwr-names" option which sets
mips_hwr_names, and adjust "reg-names=ARCH" to set mips_hwr_names.
(print_insn_arg): Change return type to "int"
and use that to indicate number of characters consumed.
Add support for "+" operand extension character, "+A", "+B",
"+C", and "K" operands.
(print_insn_mips): Adjust for changes to print_insn_arg.
(print_mips_disassembler_options): Adjust for "hwr-names"
addition and "reg-names" change.
* mips-opc (I33): New define (shorthand for INSN_ISA32R2).
(mips_builtin_opcodes): Note that "nop" and "ssnop" are special
forms of "sll". Add new MIPS32 Release 2 instructions: ehb,
di, ei, ext, ins, jr.hb, jalr.hb, mfhc1, mfhc2, mthc1, mthc2,
rdhwr, rdpgpr, seb, seh, synci, wrpgpr, wsbh.
Note that hardware rotate instructions (ror, rorv) can be
used on MIPS32 Release 2, and add the official mnemonics
for them (rotr, rotrv) and the similar "rotl" mnemonic for
left-rotate.
* doc/c-mips.texi: Add entries for -march=vr4120,vr4130,vr4181,
vr5400 and vr5500. Add entry for -mfix-vr4122-bugs.
* config/tc-mips.c (CPU_HAS_DROR, CPU_HAS_ROR): New macros.
(hilo_interlocks): True for CPU_VR5500.
(gpr_interlocks, cop_interlocks): True for CPU_VR5400 and CPU_VR5500.
(mips_fix_vr4122_bugs): New.
(append_insn): Work around 4122 errors if mips_fix_vr4122_bugs.
(mips_emit_delays): Likewise.
(macro2) [M_DROLI]: Use dror or dror32 if CPU_HAS_DROR.
[M_ROLI]: Likewise ror if CPU_HAS_ROR.
(validate_mips_insn, mips_ip): Handle '[', ']', 'e' and '%'.
(OPTION_FIX_VR4122, OPTION_NO_FIX_VR4122): New options.
(md_longopts): Add -mfix-vr4122-bugs and -no-mfix-vr4122-bugs.
(OPTION_ELF_BASE): Bump.
(md_parse_option): Handle the new options.
(mips_cpu_info_table): Add entries for vr4120, vr4130, vr4181,
vr5400 and vr5500.
[gas/testsuite/]
* gas/mips/mips4100.[sd]: Move dmadd16 and madd16 checks to...
* gas/mips/vr4111.[sd]: ...this new test.
* gas/mips/vr4120.[sd],
* gas/mips/vr4122.[sd],
* gas/mips/vr5400.[sd],
* gas/mips/vr5500.[sd]: New tests.
* mips.exp: Run them.
* doc/c-mips.texi: Remove -mcpu. Document -mabi.
* configure.in (MIPS_CPU_STRING_DEFAULT): New configuration macro.
(USE_E_MIPS_ABI_O32, MIPS_DEFAULT_64BIT): New configuration macros.
* configure, config.in: Regenerate.
* config/tc-mips.c (file_mips_abi): Rename to mips_abi.
(mips_set_options): Remove "abi" field.
(mips_opts): Update accordingly. Replace all uses of mips_opts.abi
with mips_abi.
(mips_cpu): Remove.
(mips_arch_string, mips_arch_info): New vars.
(mips_tune_string, mips_tune_info): New vars.
(ABI_NEEDS_32BIT_REGS, ABI_NEEDS_64BIT_REGS): New macros.
(HAVE_32BIT_GPRS, HAVE_32BIT_FPRS): Don't check the ABI.
(mips_isa_to_str, mips_cpu_to_str): Remove.
(mips_ip): If the selected architecture is a generic ISA rather
than a processor, only mention the ISA level in error messages.
(OPTION_MCPU): Remove.
(OPTION_FP64): New.
(md_longopts): Add -mfp64, remove -mcpu.
(mips_set_option_string): New fn.
(md_parse_option): Make -mipsN update file_mips_isa rather than
mips_opts.isa. Use mips_set_option_string to set -march or -mtune.
Don't let -mgp32 and -mfp32 change the ABI.
(show): Move to end of file. Constify string argument.
(md_show_usage): Move to the end of the file. Read available
architectures from mips_cpu_info_table.
(mips_set_architecture): New fn.
(mips_after_parse_args): Rework. Remove -mcpu handling. -mipsN
is an alias for -march=mipsN. Don't change the ABI based on other
flags. Infer the register size from the ABI as well as the
architecture. Complain about more conflicting arguments.
Unify logic with GCC.
(s_mipsset): Don't change the ABI.
(mips_elf_final_processing): Check USE_E_MIPS_ABI_O32.
(mips_cpu_info_table): Remove Generic-MIPS* entries, keeping just
"mipsN"-type entries. Remove entries that vary only in the
manufacturer's prefix, or that have "000" replaced by "k".
Remove TARGET_CPU entries. Make r2000 entry use CPU_R3000.
(mips_strict_matching_cpu_name_p, mips_matching_cpu_name_p): New fns.
(mips_parse_cpu): New fn.
(mips_cpu_info_from_name, mips_cpu_info_from_cpu): Remove.
(mips_cpu_info_from_isa): Minor formatting tweak.
[gas/testsuite]
* gas/mips/mips-gp32-fp64.d,
* gas/mips/mips-gp32-fp64-pic.d: Add -mfp64.
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
Ed Satterthwaite <ehs@broadcom.com>
* config/tc-mips.c (mips_set_options): New "ase_mdmx" member.
(mips_opts): Initialize "ase_mdmx" member.
(file_ase_mdmx): New variable.
(CPU_HAS_MDMX): New macro.
(md_begin): Initialize mips_opts.ase_mdmx and file_ase_mdmx
based on command line options and configuration defaults.
(macro_build): Note in comment that use of MDMX in macros is
not currently allowed.
(validate_mips_insn): Add support for the "O", "Q", "X", "Y", and
"Z" MDMX operand types.
(mips_ip): Accept MDMX instructions if mips_opts.ase_mdmx is set,
and add support for the "O", "Q", "X", "Y", and "Z" MDMX operand
types.
(OPTION_MDMX, OPTION_NO_MDMX, md_longopts, md_parse_option):
Add support for "-mdmx" and "-no-mdmx" options.
(OPTION_ELF_BASE): Move to accomodate new options.
(s_mipsset): Support ".set mdmx" and ".set nomdmx".
(mips_elf_final_processing): Set MDMX ASE ELF header flag if
file_ase_mdmx was set.
* doc/as.texinfo: Document -mdmx and -no-mdmx options.
* doc/c-mips.texi: Likewise, and document ".set mdmx" and ".set
nomdmx" directives.
[ gas/testsuite/ChangeLog ]
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
* gas/mips/mips64-mdmx.s: New file.
* gas/mips/mips64-mdmx.d: Likewise.
* gas/mips/mips.exp: Run new "mips64-mdmx" test.
[ include/opcode/ChangeLog ]
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
* mips.h (OP_SH_ALN, OP_MASK_ALN, OP_SH_VSEL, OP_MASK_VSEL)
(MDMX_FMTSEL_IMM_QH, MDMX_FMTSEL_IMM_OB, MDMX_FMTSEL_VEC_QH)
(MDMX_FMTSEL_VEC_OB, INSN_READ_MDMX_ACC, INSN_WRITE_MDMX_ACC)
(INSN_MDMX): New constants, for MDMX support.
(opcode character list): Add "O", "Q", "X", "Y", and "Z" for MDMX.
[ opcodes/ChangeLog ]
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
Ed Satterthwaite <ehs@broadcom.com>
* mips-dis.c (print_insn_arg): Add support for 'O', 'Q', 'X', 'Y',
and 'Z' formats, for MDMX.
(mips_isa_type): Add MDMX instructions to the ISA
bit mask for bfd_mach_mipsisa64.
* mips-opc.c: Add support for MDMX instructions.
(MX): New definition.
* mips-dis.c: Update copyright years to include 2002.
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* config/tc-mips.c (mips_set_options): New "ase_mips3d" member.
(mips_opts): Initialize "ase_mips3d" member.
(file_ase_mips3d): New variable.
(CPU_HAS_MIPS3D): New macro.
(md_begin): Initialize mips_opts.ase_mips3d and file_ase_mips3d
based on command line options and configuration defaults.
(macro_build, mips_ip): Accept MIPS-3D instructions if
mips_opts.ase_mips3d is set.
(OPTION_MIPS3D, OPTION_NO_MIPS3D, md_longopts, md_parse_option):
Add support for "-mips3d" and "-no-mips3d" options.
(OPTION_ELF_BASE): Move to accomodate new options.
(s_mipsset): Support ".set mips3d" and ".set nomips3d".
(mips_elf_final_processing): Add a comment indicating that a
MIPS-3D ASE ELF header flag should be set, when one exists.
* doc/as.texinfo: Document -mips3d and -no-mips3d options.
* doc/c-mips.texi: Likewise, and document ".set mips3d" and ".set
nomips3d" directives.
[ gas/testsuite/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* gas/mips/mips64-mips3d.s: New file.
* gas/mips/mips64-mips3d.d: Likewise.
* gas/mips/mips.exp: Run new "mips64-mips3d" test.
[ include/opcode/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* mips.h (INSN_MIPS3D): New definition used to mark MIPS-3D
instructions.
(OPCODE_IS_MEMBER): Adjust comments to indicate that ASE bit masks
may be passed along with the ISA bitmask.
[ opcodes/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_isa_type): Add MIPS3D instructions to the ISA
bit masks for bfd_mach_mips_sb1 and bfd_mach_mipsisa64. Add
comments for bfd_mach_mipsisa32 and bfd_mach_mipsisa64 that
indicate that they should dissassemble all applicable
MIPS-specified ASEs.
* mips-opc.c: Add support for MIPS-3D instructions.
(M3D): New definition.
* mips-opc.c: Update copyright years.
* config/tc-mips.c (mips_fp32, mips_32bit_abi): New static variables.
(md_long_opts): Add -mfp32 option.
(md_parse_option): Handle it. Set mips_32bit_abi given -mabi=32.
(md_show_usage): Show usage for -mfp32 and -mgp32.
(HAVE_32BIT_GPRS, HAVE_32BIT_FPRS): New macros.
(HAVE_64BIT_GPRS, HAVE_64BIT_FPRS): New macros, inverse of the above.
(HAVE_32BIT_ADDRESSES): New macro.
(load_register): Use HAVE_32BIT_GPRS to determine the register width.
(load_address): Use HAVE_32BIT_ADDRESSES to determine the address size.
(s_cprestore, s_cpadd): Likewise.
(macro): Use HAVE_32BIT_GPRS to determine the width of registers
used in branch and M_LI_D macros. Use HAVE_64BIT_FPRS to determine
the width registers used in M_LI_DD macros. Use HAVE_32BIT_ADDRESSES
to determine the width of addresses in load, store and jump macros.
(macro2): Use HAVE_32BIT_GPRS to determine the width of registers
used in set instructions; do not check the address size for them.
Use HAVE_32BIT_ADDRESSES to determine the width of addresses in
unaligned load and store macros.
(mips_ip): Use the new macros to check the width of a register when
processing float constants. Force a constant into memory if it is
destined for an FPR and the FPRs are wider than the GPRs. Warn about
odd FPR numbers if HAVE_32BIT_FPRS. Use HAVE_32BIT_GPRS rather
than mips_gp32 to select synthetic instructions.
(macro_build): Use HAVE_32BIT_GPRS rather than mips_gp32 to select
synthetic instructions.
* NEWS: Updated for the new -n option for the MIPS assembler.
* config/tc-mips.c (md_show_usage): Add -n.
* doc/as.texinfo: Document the new -n option.
* doc/c-mips.texi: Likewise.
* doc/as.1: Regenerated.
