Sync from gcc:
2007-07-03 Paolo Bonzini <bonzini@gnu.org>
PR other/27063
* configure.in: Test subdir_requires and give an appropriate
error message.
* configure: Regenerate.
2006-06-16 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
PR target/27540
* configure.in: Only enable libgomp on IRIX 6.
* configure: Regenerate.
PR bootstrap/28072
* configure.in: Add target-boehm-gc to noconfigdirs depending on
whether target-libjava is being configured instead of whether the
java front end is enabled.
* configure: Regenerate.
Sync from gcc:
2006-06-12 David Ayers <d.ayers@inode.at>
PR bootstrap/27963
PR target/19970
* configure.in: Remove target-boehm-gc from noconfigdirs where
${libgcj} is specified.
* configure: Regenerate.
Sync from gcc:
2006-06-06 David Ayers <d.ayers@inode.at>
PR libobjc/13946
* Makefile.def: Add dependencies for libobjc which boehm-gc.
* Makefile.in: Regenerate.
* configure.in: Add --enable-objc-gc at toplevel and have it
enable boehm-gc for Objective-C.
Remove target-boehm-gc from libgcj.
Add target-boehm-gc to target_libraries.
Add target-boehm-gc to noconfigdirs where ${libgcj}
is specified.
Assert that boehm-gc is supported when requested for Objective-C.
Only build boehm-gc if needed either for Java or Objective-C.
* configure: Regenerate.
2006-06-05 Paolo Bonzini <bonzini@gnu.org>
PR 27674
* Makefile.tpl (configure-[+prefix+][+module+],
all-[+prefix+][+module+]): Depend on stage_current if bootstrapping.
Remove rule to unstage bootstrapped modules.
(stage_current): New.
* Makefile.in: Regenerate.
2006-05-20 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Andreas Tobler <a.tobler@schweiz.ch>
* configure.in: Enable libgcj for hppa*-hp-hpux11*.
* configure: Rebuilt.
Revert
2006-01-31 Richard Guenther <rguenther@suse.de>
Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (target_modules): Add libgcc-math target module.
* configure.in (target_libraries): Add libgcc-math target library.
(--enable-libgcc-math): New configure switch.
* Makefile.in: Re-generate.
* configure: Re-generate.
PR bootstrap/25670
* Makefile.tpl ([+compare-target+]): Print explanation messages.
* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES): New flags_to_pass.
* Makefile.tpl (BASE_FLAGS_TO_PASS): Support optional flags_to_pass.
(EXTRA_GCC_FLAGS): Remove ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES,
BUILD_PREFIX, BUILD_PREFIX_1.
* configure.in: (BUILD_PREFIX, BUILD_PREFIX_1): Don't substitute.
* Makefile.def (bootstrap stage 1): Pass LIBCFLAGS too.
* Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Override LIBCFLAGS too.
* Makefile.tpl (configure-stage[+id+]-[+prefix+][+module+],
all-stage[+id+]-[+prefix+][+module+], : Use $(current_stage) instead
of `cat stage_current`. Always provide the `r' and `s' variables.
(clean-stage[+id+]-[+prefix+][+module+]): Likewise, and make it into
a single shell execution.
(configure-[+prefix+][+module+], all-[+prefix+][+module+]): For
bootstrapped modules, make the stage1 module if the build was not
started yet, else build the current stage.
(all-host, all-target): Omit bootstrapped modules (if bootstrapping).
(all-build, all-host, all-target, [+make_target+]-host,
[+make_target+]-target): Do not use \-continued lines.
(target modules): Depend on stage_last, not all-gcc, if bootstrapping.
(current_stage, restrap, stage_last): New.
* Makefile.in: Regenerate.
* configure: Regenerate.
Andreas Schwab <schwab@suse.de>
* configure: Regenerate.
config:
2006-02-14 Paolo Bonzini <bonzini@gnu.org>
Andreas Schwab <schwab@suse.de>
* acx.m4 (NCN_STRICT_CHECK_TARGET_TOOLS): Use correct program name.
(ACX_CHECK_INSTALLED_TARGET_TOOL): Likewise, and always set $1.
* configure.in: Set with_gnu_as, with_gnu_ld, with_newlib earlier.
Set md_exec_prefix. Use ACX_CHECK_INSTALLED_TARGET_TOOL to find
the assembler, linker and binutils.
* configure: Regenerate.
config:
2006-01-16 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (NCN_STRICT_CHECK_TARGET_TOOLS): Test $with_build_time_tools.
(ACX_PATH_SEP): New.
(ACX_TOOL_DIRS): Move here from the gcc directory.
(ACX_CHECK_INSTALLED_TARGET_TOOL): New.
(GCC_TARGET_TOOL): Do not use a host tool if we found a target tool
with a complete path in either $with_build_time_tools or $exec_prefix.
Sync from gcc:
2006-01-04 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/24252
* Makefile.def (flags_to_pass): Add STAGE1_CFLAGS and STAGE1_LANGUAGES.
* Makefile.tpl (OBJDUMP): New.
(EXTRA_HOST_FLAGS): Add it.
(EXTRA_GCC_FLAGS): Remove flags already specified in flags_to_pass.
* Makefile.tpl (stage[+id+]-start, stage[+id+]-end): Do not try
to use symbolic links between directories. Avoid race conditions
or make them harmless.
* configure.in: Do not try to use symbolic links between directories.
* Makefile.def (LEAN): Pass.
* Makefile.tpl (LEAN): Define.
(stage[+id+]-start): Accept that the previous directory does not
exist, if the bootstrap is lean.
(stage[+id+]-bubble): Invoke lean bootstrap commands after
stage[+id+]-start. Use a makefile variable and an `if' instead of a
configure substitution.
([+compare-target+]): Likewise.
([+bootstrap-target+]-lean): New.
* configure.in: Remove lean bootstrap support from here.
* Makefile.in: Regenerate.
* configure: Regenerate.
2006-01-02 Andreas Schwab <schwab@suse.de>
* configure.in: When reconfiguring remove Makefile in
all stage directories.
* configure: Regenerate.
Revert Ada-related part of the previous change.
* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, ADAFLAGS_FOR_TARGET):
Do not pass.
* Makefile.tpl (BOOT_ADAFLAGS): Do not define.
* Makefile.in: Regenerate.
* configure.in: Do not include mt-ppc-aix target fragment.
* configure: Regenerate.
config:
2005-12-20 Paolo Bonzini <bonzini@gnu.org>
Revert Ada-related part of the previous change.
* mt-ppc-aix: Delete.
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
Sync with gcc:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc
from the gcc build directory.
* Makefile.in: Regenerate.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.def: Add new libdecnumber host_module. Make all-gcc
depend on all-libdecnumber.
* configure.in (host_libs): Include libdecnumber.
* Makefile.in: Regenerate.
* configure: Likewise.
2005-11-21 Kean Johnston <jkj@sco.com>
* config.sub, config.guess: Sync from upstream sources.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
* Makefile.tpl (CONFIGURE_GDB_TK, INSTALL_GDB_TK): New variables.
(configure-gdb, install-gdb): New rules.
* configure.in: Set CONFIGURE_GDB_TK and INSTALL_GDB_TK.
* Makefile.in, configure: Regenerated.
PR bootstrap/22340
* configure.in (default_target): Remove.
* Makefile.tpl (all): Do not use prerequisites as subroutines
(all) [gcc-bootstrap]: Bootstrap gcc first if it was not done yet.
(do-[+make_target+], check, install, [+bootstrap_target+]): Do not
use prerequisites as subroutines.
(check-host, check-target): New.
(bootstrap configure & all targets): Do not use stage*-start
if the directory layout is already ok.
(non-bootstrap configure & all targets): Prepend a $(unstage).
(stage[+id+]-bubble): Do that here. Do not use NOTPARALLEL.
(NOTPARALLEL): Remove.
(unstage, stage variables): New variables.
(unstage, stage targets): Simply expand to those variables.
* configure: Regenerate.
* Makefile.in: Regenerate.
* configure.in (powerpc-*-aix*): Add target-libssp to noconfigdirs.
(rs6000-*-aix*): Same.
* configure: Regenerate.
2005-09-14 Francois-Xavier Coudert <coudert@clipper.ens.fr>
* configure.in: Recognize f95 in the --enable-languages option,
and substitute it for fortran, issuing a warning.
* configure: Regenerate.
2005-08-12 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Replace NCN_STRICT_CHECK_TOOL with
NCN_STRICT_CHECK_TOOLS, and likewise for NCN_STRICT_CHECK_TARGET_TOOLS.
Look for alternate names of the target cc and c++
config:
2005-08-12 Paolo Bonzini <bonzini@gnu.org>
* config/acx.m4 (NCN_CHECK_TARGET_TOOL, NCN_STRICT_CHECK_TOOL,
NCN_STRICT_CHECK_TARGET_TOOL): Remove.
(NCN_STRICT_CHECK_TOOLS, NCN_STRICT_CHECK_TARGET_TOOLS): New,
2005-07-14 Jim Blandy <jimb@redhat.com>
* configure.in: Add cases for Renesas m32c.
* configure: Regenerated.
bfd/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for m32c-*-elf (Renesas m32c and m16c).
* Makefile.am (ALL_MACHINES): Add cpu-m32c.lo.
(ALL_MACHINES_CFILES): Add cpu-m32c.c.
(BFD32_BACKENDS): Add elf32-m32c.lo.
(BFD32_BACKENDS_CFILES): Add elf32-m32c.c.
(cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'.
* Makefile.in: Regenerated.
* archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New
arch and mach codes.
(bfd_m32c_arch): New arch info object.
(bfd_archures_list): List bfd_m32c_arch.
* bfd-in2.h: Regenerated.
* config.bfd: Add case for the m32c.
* configure.in: Add case for the m32c.
* configure: Regenerated.
* cpu-m32c.c, elf32-m32c.c: New files.
* libbfd.h: Regenerated.
* targets.c (bfd_elf32_m32c_vec): Declare.
(_bfd_target_vector): List bfd_elf32_m32c_vec.
binutils/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* readelf.c: #include "elf/m32c.h"
(guess_is_rela, dump_relocations, get_machine_name): Add cases for
EM_M32C.
* Makefile.am (readelf.o): Update dependencies.
* Makefile.in: Regenerated.
cpu/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* m32c.cpu, m32c.opc: Machine description for the Renesas M32C.
gas/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C.
* Makefile.am (CPU_TYPES): List m32c.
(TARGET_CPU_CFILES): List config/tc-m32c.c.
(TARGET_CPU_HFILES): List config/tc-m32c.h.
* configure.in: Add case for m32c.
* configure.tgt: Add cases for m32c and m32c-*-elf.
* configure: Regenerated.
* config/tc-m32c.c, config/tc-m32c.h: New files.
* doc/Makefile.am (CPU_DOCS): Add c-m32c.texi.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set M32C.
* doc/as.texinfo: Add text for the M32C-specific options and line
comment characters, and refer to c-m32c.texi.
* doc/c-m32c.texi: New file.
include/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* dis-asm.h (print_insn_m32c): New declaration.
include/elf/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for Renesas M32C and M16C.
* common.h (EM_M32C): New machine number.
* m32c.h: New file.
ld/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o.
(eelf32m32c.c): New target.
* Makefile.in: Regenerated.
* configure.tgt: Add case for m32c-*-elf.
* emulparams/elf32m32c.sh: New file.
opcodes/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New.
* m32c-desc.h, m32c-opc.h: New.
* Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h.
(CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c,
m32c-opc.c.
(ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo,
m32c-ibld.lo, m32c-opc.lo.
(CLEANFILES): List stamp-m32c.
(M32C_DEPS): List stamp-m32c, if CGEN_MAINT.
(CGEN_CPUS): Add m32c.
(m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c)
(m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS.
(m32c_opc_h): New variable.
(stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo)
(m32c-opc.lo): New rules.
* Makefile.in: Regenerated.
* configure.in: Add case for bfd_m32c_arch.
* configure: Regenerated.
* disassemble.c (ARCH_m32c): New.
[ARCH_m32c]: #include "m32c-desc.h".
(disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c.
(disassemble_init_for_target) [ARCH_m32c]: Same.
* cgen-ops.h, cgen-types.h: New files.
* Makefile.am (HFILES): List them.
* Makefile.in: Regenerated.
<mmix-knuth-mmixware>: Set unsupported_languages. Name explicit
non-ported target libraries in noconfigdirs.
<cris-*, crisv32-*> Ditto, except for non-aout, non-elf,
non-linux-gnu. Remove libgcj_ex_libffi.
<lang_frag loop>: Set add_this_lang=no if the language is in
unsupported_languages.
* configure: Regenerate.
