Commit e5f2f7d901 ("Disable year 2038 support on 32-bit hosts by
default") fixed a mismatch between 64-bit time_t in GDB and system headers
and 32-bit time_t in BFD.
However, since commit 862776f26a ("Finalized intl-update patches")
gnulib's year 2038 support has been accidentally re-enabled — causing
problems for 32-bit hosts again. The commit split baseargs into
{h,b}baseargs, but this hasn't been done for the code that handles
--disable-year2038.
This patch restores the intended behaviour. With this change, the number
of unexpected core files goes from 18 to 4.
Tested on armv8l-linux-gnueabihf.
Approved-By: Luis Machado <luis.machado@arm.com>
This update brings in the following commits from the gcc mainline:
commit b7e5a29602143b53267efcd9c8d5ecc78cd5a62f
Author: Tom Tromey <tom@tromey.com>
Date: Tue Jan 9 06:25:26 2024 -0700
Pass GUILE down to subdirectories
When I enable cgen rebuilding in the binutils-gdb tree, the default is
to run cgen using 'guile'. However, on my host, guile is guile 2.2,
which doesn't work for me -- I have to use guile3.0.
This patch arranges to pass "GUILE" down to subdirectories, so I can
use 'make GUILE=guile3.0'.
commit 725fb3595622a4ad8cd078a42fab1c395cbf90cb
Author: Pierre-Emmanuel Patry <pierre-emmanuel.patry@embecosm.com>
Date: Wed Oct 25 13:06:48 2023 +0200
build: Add libgrust as compilation modules
Define the libgrust directory as a host compilation module as well as
for targets. Disable target libgrust if we're not building target
libstdc++.
commit 56ca59a03150cf44cea340f58967c990ed6bf43c
Author: Lewis Hyatt <lhyatt@gmail.com>
Date: Thu Nov 16 11:18:37 2023 -0500
Makefile.tpl: Avoid race condition in generating site.exp from the top level
A command like "make -j 2 check-gcc-c check-gcc-c++" run in the top level of
a fresh build directory does not work reliably. That will spawn two
independent make processes inside the "gcc" directory, and each of those
will attempt to create site.exp if it doesn't exist and will interfere with
each other, producing often a corrupted or empty site.exp. Resolve that by
making these targets depend on a new phony target which makes sure site.exp
is created first before starting the recursive makes.
commit 6a6d3817afa02bbcd2388c8e005da6faf88932f1
Author: Iain Sandoe <iain@sandoe.co.uk>
Date: Sun Mar 28 14:48:17 2021 +0100
Config,Darwin: Allow for configuring Darwin to use embedded runpath.
Recent Darwin versions place contraints on the use of run paths
specified in environment variables. This breaks some assumptions
in the GCC build.
This change allows the user to configure a Darwin build to use
'@rpath/libraryname.dylib' in library names and then to add an
embedded runpath to executables (and libraries with dependents).
The embedded runpath is added by default unless the user adds
'-nodefaultrpaths' to the link line.
For an installed compiler, it means that any executable built with
that compiler will reference the runtimes installed with the
compiler (equivalent to hard-coding the library path into the name
of the library).
During build-time configurations any "-B" entries will be added to
the runpath thus the newly-built libraries will be found by exes.
Since the install name is set in libtool, that decision needs to be
available here (but might also cause dependent ones in Makefiles,
so we need to export a conditional).
This facility is not available for Darwin 8 or earlier, however the
existing environment variable runpath does work there.
We default this on for systems where the external DYLD_LIBRARY_PATH
does not work and off for Darwin 8 or earlier. For systems that can
use either method, if the value is unset, we use the default (which
is currently DYLD_LIBRARY_PATH).
commit 2551e10038a70901f30b2168e6e3af4536748f3c
Author: Sergei Trofimovich <siarheit@google.com>
Date: Mon Oct 2 12:08:17 2023 +0100
Makefile.tpl: disable -Werror for feedback stage [PR111663]
Without the change profiled bootstrap fails for various warnings on
master branch as:
$ ../gcc/configure
$ make profiledbootstrap
...
gcc/genmodes.cc: In function ‘int main(int, char**)’:
gcc/genmodes.cc:2152:1: error: ‘gcc/build/genmodes.gcda’ profile count data file not found [-Werror=missing-profile]
...
gcc/gengtype-parse.cc: In function ‘void parse_error(const char*, ...)’:
gcc/gengtype-parse.cc:142:21: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
The change removes -Werror just like autofeedback does today.
commit d1bff1ba4d470f6723be83c0e3c4d5083e51877a
Author: Thomas Schwinge <thomas@codesourcery.com>
Date: Thu Jun 1 23:07:37 2023 +0200
Pass 'SYSROOT_CFLAGS_FOR_TARGET' down to target libraries [PR109951]
..., where we need to use it (separate commits) for build-tree testing, similar
to 'gcc/Makefile.in:site.exp':
# TEST_ALWAYS_FLAGS are flags that should be passed to every compilation.
# They are passed first to allow individual tests to override them.
@echo "set TEST_ALWAYS_FLAGS \"$(SYSROOT_CFLAGS_FOR_TARGET)\"" >> ./site.tmp
PR testsuite/109951
* Makefile.tpl (BASE_TARGET_EXPORTS): Add
'SYSROOT_CFLAGS_FOR_TARGET'.
* Makefile.in: Regenerate.
Use the substituted value for GCDFLAGS instead of hardcoding $(CFLAGS) so
that the subdir configure scripts use the configured value.
* configure.ac (GDCFLAGS): Set default from ${CFLAGS}.
This commit merges the devel/modula2 into master.
The libraries reside in libgm2, the compiler in gcc/m2
and the testsuite in gcc/testsuite/gm2.
* configure.ac (target_libraries): Add target-libgm2.
Add NCN_STRICT_CHECK_TARGET_TOOLS entry for gm2.
Add GCC_TARGET_TOOL entry for gm2. (compare_exclusions)
add gcc/m2/gm2-compiler/M2Version,
gcc/m2/gm2-compiler-boot/SYSTEM and gcc/m2/gm2version.
* Makefile.def (target_modules): Add libgm2. (flags_to_pass)
Add GM2_FOR_TARGET, GM2FLAGS_FOR_TARGET. (dependencies) Add
all-target-libgm2 and on=all-target-libatomic. (languages)
Add entry for language=m2 with gcc-check-target=check-m2
and lib-check-target=check-target-libgm2.
* Makefile.tpl (BUILD_EXPORTS): Add definition for GM2
and GM2FLAGS. (HOST_EXPORTS) Add definition for GM2.
(BASE_TARGET_EXPORTS) Add definition for GM2.
(GM2_FOR_BUILD) Defined. (GM2FLAGS) Defined.
(GM2_FOR_TARGET) Defined. (GM2FLAGS_FOR_TARGET) Defined.
(EXTRA_HOST_FLAGS) Defined. (POSTSTAGE1_FLAGS_TO_PASS)
Add GM2 and GM2_FOR_BUILD. (EXTRA_TARGET_FLAGS) Add
GM2 and GM2FLAGS. (EXTRA_GCC_FLAGS) Add GM2_FOR_TARGET.
Signed-off-by: Gaius Mulley <gaiusmod2@gmail.com>
The latest versions of Darwin on the Aarch64 platform mandate PIE executables.
On x86_64 it remains optional, but produces tool warnings after Darwin20, so
we default to PIE executables there too.
All (non-PowerPC) 64b Darwin platforms mandate PIC code and therefore force
host_shared on (we issue a diagnostic if the user tries to configure them
non-shared).
However, this also means we cannot test the host_shared setting independently
of the host_pie setting so that the logic for setting PICFLAG must be amended
for Darwin.
For Darwin versions required to have PIE executables, in the event that the
user tries to configure these as --disable-host-pie, we issue a warning and
override the setting. These versions must also switch host_pie on even if it
is not given in the configure line. To cater for this we pass the current
value of host_pie, as determined by top-level configure, to the GCC configure.
Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
* Makefile.def: Pass the enable-host-pie value to GCC configure.
* configure.ac: Adjust the logic for shared and PIE host flags to
ensure that PIE is passed for hosts that require it.
This patch implements the --enable-host-pie configure option which
makes the compiler executables PIE. This can be used to enhance
protection against ROP attacks, and can be viewed as part of a wider
trend to harden binaries.
Co-Authored by: Iain Sandoe <iain@sandoe.co.uk>
* configure.ac (--enable-host-pie): New check. Set PICFLAG after this
check.
intl/
* configure.ac (--enable-host-shared): Don't set PICFLAG here.
(--enable-host-pie): New check. Set PICFLAG after this check.
libdecnumber/
* configure.ac (--enable-host-shared): Don't set PICFLAG here.
(--enable-host-pie): New check. Set PICFLAG after this check.
zlib/
* configure.ac (--enable-host-shared): Don't set PICFLAG here.
(--enable-host-pie): New check. Set PICFLAG after this check.
If we are building PIC/PIE host executables, and we are building dependent
libs (e.g. GMP) in-tree those libs need to be configured to generate PIC code.
Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
* Makefile.def: Pass host_libs_picflag to host dependent library
configures.
* configure.ac (host_libs_picflag): New configure variable set to
'--with-pic' when building 'host_shared'.
Since 9911806278, the configure checks
about GMP and MPFR for gdb builds have been moved to the toplevel
configure.
However, it doesn't take into account the --disable-gdb option. Meaning
that a build without gdb will require these libraries even if not
needed.
ChangeLog:
* configure.ac: Skip GMP and MPFR when --disable-gdb is
provided.
* configure: Regenerate.
This patch uses the toplevel configure parts for GMP/MPFR for
gdb. The only thing is that gdb now requires MPFR for building.
Before it was a recommended but not required library.
Also this allows building of GMP and MPFR with the toplevel
directory just like how it is done for GCC.
We now error out in the toplevel configure of the version
of GMP and MPFR that is wrong.
OK after GDB 13 branches? Build gdb 3 ways:
with GMP and MPFR in the toplevel (static library used at that point for both)
With only MPFR in the toplevel (GMP distro library used and MPFR built from source)
With neither GMP and MPFR in the toplevel (distro libraries used)
Changes from v1:
* Updated gdb/README and gdb/doc/gdb.texinfo.
* Regenerated using unmodified autoconf-2.69
Thanks,
Andrew Pinski
ChangeLog:
* Makefile.def: Add configure-gdb dependencies
on all-gmp and all-mpfr.
* configure.ac: Split out MPC checking from MPFR.
Require GMP and MPFR if the gdb directory exist.
* Makefile.in: Regenerate.
* configure: Regenerate.
gdb/ChangeLog:
PR bug/28500
* configure.ac: Remove AC_LIB_HAVE_LINKFLAGS
for gmp and mpfr.
Use GMPLIBS and GMPINC which is provided by the
toplevel configure.
* Makefile.in (LIBGMP, LIBMPFR): Remove.
(GMPLIBS, GMPINC): Add definition.
(INTERNAL_CFLAGS_BASE): Add GMPINC.
(CLIBS): Exchange LIBMPFR and LIBGMP
for GMPLIBS.
* target-float.c: Make the code conditional on
HAVE_LIBMPFR unconditional.
* top.c: Remove code checking HAVE_LIBMPFR.
* configure: Regenerate.
* config.in: Regenerate.
* README: Update GMP/MPFR section of the config
options.
* doc/gdb.texinfo: Likewise.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28500
libsframe is a library that allows you to:
- decode a .sframe section
- probe and inspect a .sframe section
- encode (and eventually write) a .sframe section.
This library is currently being used by the linker, readelf, objdump.
This library will also be used by the SFrame unwinder which is still
to be upstream'd.
The file include/sframe-api.h defines the user-facing APIs for decoding,
encoding and probing .sframe sections. A set of error codes together
with their error message strings are also defined.
Endian flipping is performed automatically at read and write time, if
cross-endianness is detected.
ChangeLog:
* Makefile.def: Add libsframe as new module with its
dependencies.
* Makefile.in: Regenerated.
* binutils/Makefile.am: Add libsframe.
* binutils/Makefile.in: Regenerated.
* configure: Regenerated
* configure.ac: Add libsframe to host_libs.
* libsframe/Makefile.am: New file.
* libsframe/Makefile.in: New file.
* libsframe/aclocal.m4: New file.
* libsframe/config.h.in: New file.
* libsframe/configure: New file.
* libsframe/configure.ac: New file.
* libsframe/sframe-error.c: New file.
* libsframe/sframe-impl.h: New file.
* libsframe/sframe.c: New file.
include/ChangeLog:
* sframe-api.h: New file.
testsuite/ChangeLog:
* libsframe/testsuite/Makefile.am: New file.
* libsframe/testsuite/Makefile.in: Regenerated.
* libsframe/testsuite/libsframe.decode/Makefile.am: New
file.
* libsframe/testsuite/libsframe.decode/Makefile.in:
Regenerated.
* libsframe/testsuite/libsframe.decode/decode.exp: New file.
* libsframe/testsuite/libsframe.encode/Makefile.am:
Likewise.
* libsframe/testsuite/libsframe.encode/Makefile.in:
Regenerated.
* libsframe/testsuite/libsframe.encode/encode.exp: New file.
* libsframe/testsuite/libsframe.encode/encode-1.c: Likewise.
* libsframe/testsuite/libsframe.decode/be-flipping.c: Likewise.
* libsframe/testsuite/libsframe.decode/frecnt-1.c: Likewise.
* libsframe/testsuite/libsframe.decode/frecnt-2.c: Likewise.
* libsframe/testsuite/libsframe.decode/DATA-BE: New file.
* libsframe/testsuite/libsframe.decode/DATA1: Likewise.
* libsframe/testsuite/libsframe.decode/DATA2: Likewise.
Commit 228cf97dd3 ("Merge configure.ac from gcc project") undid the
change originally done in de83289ef3 ("Pass PKG_CONFIG_PATH down from
top-level Makefile"). Re-apply it.
Change-Id: I91138dfca41c43b05e53e445f62e4b27882536bf
To merge with gcc's copy of configure.ac we need to revert changes to
configure.ac in the following gcc commits:
dc832fb39fc0 2022-08-25
fc259b522c0f 2022-06-25
Then reapply configure.ac changes in binutils from these binutils
commits:
50ad1254d5 2021-01-09
bb368aad29 2022-03-11
e5f2f7d901 2022-07-26
2cac01e3ff 2022-09-26
Plus copy over gcc's config/ax_cxx_compile_stdcxx.m4, then regenerate
configure.
PR29397 PR29563: Add new configure option --with-zstd which defaults to
auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support
zstd compressed debug sections for most tools.
* bfd: for addr2line, objdump --dwarf, gdb, etc
* gas: support --compress-debug-sections=zstd
* ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd
* objcopy: support ELFCOMPRESS_ZSTD input for
--decompress-debug-sections and --compress-debug-sections=zstd
* gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd
symbols, so gdb has to link against -lzstd in this patch.
If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We
can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this
is too heavyweight, so don't do it for now.
```
% ld/ld-new a.o
ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
% ld/ld-new a.o --compress-debug-sections=zstd
ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support
% binutils/objcopy --compress-debug-sections=zstd a.o b.o
binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support
% binutils/objcopy b.o --decompress-debug-sections
binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
```
Because CPPFLAGS_FOR_BUILD is used in some subdirectories (through
bfd/warning.m4), not AC_SUBSTing the variable causes minor issues.
Fortunately, it didn't cause severe errors but error messages related to
@CPPFLAGS_FOR_BUILD@ (not AC_SUBSTed CPPFLAGS_FOR_BUILD variable passed
to subdirectories through Makefile) remain in config.log.
To avoid invalid invocation of preprocessor for build environment, we
need to set proper CPPFLAGS_FOR_BUILD (may be empty) and pass it to
subdirectories that need it. This is what this commit does.
ChangeLog:
* configure.ac: Pass CPPFLAGS_FOR_BUILD to subdirectories.
* configure: Regenerate.
With a recent import of gnulib, code has been pulled that tests and enables
64-bit time_t by default on 32-bit hosts that support it.
Although gdb can use the gnulib support, bfd doesn't use gnulib and currently
doesn't do these checks.
As a consequence, if we have a 32-bit host that supports 64-bit time_t, we'll
have a mismatch between gdb's notion of time_t and bfd's notion of time_t.
This will lead to mismatches in the struct stat size, leading to memory
corruption and crashes.
This patch disables the year 2038 check for now, which makes things work
reliably again.
I'd consider this a temporary fix until we have proper bfd checks for the year
2038, if it makes sense. 64-bit hosts seems to be more common these days, so
I'm not sure how important it is to have this support enabled and how soon
we want to enable it.
Thoughts?
When building gdb with --enable-shared, I run into:
...
ld: build/zlib/libz.a(libz_a-inffast.o): relocation R_X86_64_32S against \
`.rodata' can not be used when making a shared object; recompile with -fPIC
ld: build/zlib/libz.a(libz_a-inflate.o): warning: relocation against \
`inflateResetKeep' in read-only section `.text'
collect2: error: ld returned 1 exit status
make[3]: *** [libbfd.la] Error 1
...
This is a regression since commit a08bdb159b ("[gdb/build] Fix gdbserver
build with -fsanitize=thread").
The problem is that a single case statement in configure is shared to handle
special requirements for both the host libiberty and host zlib, which has the
effect that only one is handled.
Fix this by handling libiberty and zlib each in its own case statement.
Build on x86_64-linux, with and without --enable-shared.
ChangeLog:
2022-06-27 Tom de Vries <tdevries@suse.de>
* configure.ac: Set extra_host_libiberty_configure_flags and
extra_host_zlib_configure_flags in separate case statements.
* configure: Regenerate.
[ Copied from gcc commit 153689603fd ("[gdb/build] Fix gdbserver build with
-fsanitize=thread"). ]
When building gdbserver with -fsanitize=thread (added to CFLAGS/CXXFLAGS) we
run into:
...
ld: ../libiberty/libiberty.a(safe-ctype.o): warning: relocation against \
`__tsan_init' in read-only section `.text'
ld: ../libiberty/libiberty.a(safe-ctype.o): relocation R_X86_64_PC32 \
against symbol `__tsan_init' can not be used when making a shared object; \
recompile with -fPIC
ld: final link failed: bad value
collect2: error: ld returned 1 exit status
make[1]: *** [libinproctrace.so] Error 1
...
which looks similar to what is described in commit 78e4948694 ("[gdb/build]
Fix gdbserver build with -fsanitize=address").
The gdbserver component builds a shared library libinproctrace.so, which uses
libiberty and therefore requires the pic variant. The gdbserver Makefile is
setup to use this variant, if available, but it's not there.
Fix this by listing gdbserver in the toplevel configure alongside libcc1, as a
component that needs the libiberty pic variant, setting:
...
extra_host_libiberty_configure_flags=--enable-shared
...
Tested on x86_64-linux.
ChangeLog:
2022-06-27 Tom de Vries <tdevries@suse.de>
* configure.ac: Build libiberty pic variant for gdbserver.
* configure: Regenerate.
[Sending to binutils, gdb-patches and gcc-patches, since it touches the
top-level Makefile/configure]
I have my debuginfod library installed in a non-standard location
(/opt/debuginfod), which requires me to set
PKG_CONFIG_PATH=/opt/debuginfod/lib/pkg-config. If I just set it during
configure:
$ PKG_CONFIG_PATH=/opt/debuginfod/lib/pkg-config ./configure --with-debuginfod
$ make
or
$ ./configure --with-debuginfod PKG_CONFIG_PATH=/opt/debuginfod/lib/pkg-config
$ make
Then PKG_CONFIG_PATH is only present (and ignored) during the top-level
configure. When running make (which runs gdb's and binutils'
configure), PKG_CONFIG_PATH is not set, which results in their configure
script not finding the library:
checking for libdebuginfod >= 0.179... no
configure: error: "--with-debuginfod was given, but libdebuginfod is missing or unusable."
Change the top-level configure/Makefile system to capture the value
passed when configuring the top-level and pass it down to
subdirectories (similar to CFLAGS, LDFLAGS, etc).
I don't know much about the top-level build system, so I really don't
know if I did this correctly. The changes are:
- Use AC_SUBST(PKG_CONFIG_PATH) in configure.ac, so that
@PKG_CONFIG_PATH@ gets replaced with the actual PKG_CONFIG_PATH value
in config files (i.e. Makefile)
- Add a PKG_CONFIG_PATH Makefile variable in Makefile.tpl, initialized
to @PKG_CONFIG_PATH@
- Add PKG_CONFIG_PATH to HOST_EXPORTS in Makefile.tpl, which are the
variables set when running the sub-configures
I initially added PKG_CONFIG_PATH to flags_to_pass, in Makefile.def, but
I don't think it's needed. AFAIU, this defines the flags to pass down
when calling "make" in subdirectories. We only need PKG_CONFIG_PATH to
be passed down during configure. After that, it's captured in
gdb/config.status, so even if a "make" causes a re-configure later
(because gdb/configure has changed, for example), the PKG_CONFIG_PATH
value will be remembered.
ChangeLog:
* configure.ac: Add AC_SUBST(PKG_CONFIG_PATH).
* configure: Re-generate.
* Makefile.tpl (HOST_EXPORTS): Pass PKG_CONFIG_PATH.
(PKG_CONFIG_PATH): New.
* Makefile.in: Re-generate.
Change-Id: I91138dfca41c43b05e53e445f62e4b27882536bf
The top-level configure script is shared between the gcc repository
and the binutils-gdb repository.
The target_configdirs variable in the configure.ac script, defines
sub-directories that contain components that should be built for the
target using the target tools.
Some components, e.g. zlib, are built as both host and target
libraries.
This causes problems for binutils-gdb. If we run 'make all' in the
binutils-gdb repository we end up trying to build a target version of
the zlib library, which requires the target compiler be available.
Often the target compiler isn't immediately available, and so the
build fails.
The problem with zlib impacted a previous attempt to synchronise the
top-level configure scripts from gcc to binutils-gdb, see this thread:
https://sourceware.org/pipermail/binutils/2019-May/107094.html
And I'm in the process of importing libbacktrace in to binutils-gdb,
which is also a host and target library, and triggers the same issues.
I believe that for binutils-gdb, at least at the moment, there are no
target libraries that we need to build.
In the configure script we build three lists of things we want to
build, $configdirs, $build_configdirs, and $target_configdirs, we also
build two lists of things we don't want to build, $skipdirs and
$noconfigdirs. We then remove anything that is in the lists of things
not to build, from the list of things that should be built.
My proposal is to add everything in target_configdirs into skipdirs,
if the source tree doesn't contain a gcc/ sub-directory. The result
is that for binutils-gdb no target tools or libraries will be built,
while for the gcc repository, nothing should change.
If a user builds a unified source tree, then the target tools and
libraries should still be built as the gcc/ directory will be present.
I've tested a build of gcc on x86-64, and the same set of target
libraries still seem to get built. On binutils-gdb this change
resolves the issues with 'make all'.
ChangeLog:
* configure: Regenerate.
* configure.ac (skipdirs): Add the contents of target_configdirs if
we are not building gcc.
Check if AR is usable for LTO build with --enable-pgo-build=lto:
checking for -plugin option... ar: no operation specified
Failed: ar --plugin /usr/gcc-11.0.0-x32/libexec/gcc/x86_64-pc-linux-gnu/11.0.0/liblto_plugin.so rc
no
configure: error: AR with --plugin and rc is required for LTO build
instead of build failure later.
PR binutils/26766
* configure.ac:
* configure: Regenerated.
Add the --enable-pgo-build[=lto] configure option. When binutils+gdb
is not built together with GCC, --enable-pgo-build enables the PGO build:
1. First build with -fprofile-generate.
2. Use "make maybe-check-*" to generate profiling data and pass -i to make
to ignore errors when generating profiling data.
3. Use "make clean" to remove the previous build.
4. Rebuild with -fprofile-use.
With --enable-pgo-build=lto, -flto=jobserver -ffat-lto-objects are used
together with -fprofile-generate and -fprofile-use. Add '+' to the command
line for recursive make to support -flto=jobserver -ffat-lto-objects.
NB: --enable-pgo-build=lto enables the PGO build with LTO while
--enable-lto enables LTO support in toolchain.
PR binutils/26766
* Makefile.tpl (BUILD_CFLAGS): New.
(CFLAGS): Append $(BUILD_CFLAGS).
(CXXFLAGS): Likewise.
(PGO_BUILD_GEN_FLAGS_TO_PASS): New.
(PGO_BUILD_TRAINING_CFLAGS): Likewise.
(PGO_BUILD_TRAINING_CXXFLAGS): Likewise.
(PGO_BUILD_TRAINING_FLAGS_TO_PASS): Likewise.
(PGO_BUILD_TRAINING_MFLAGS): Likewise.
(PGO_BUILD_USE_FLAGS_TO_PASS): Likewise.
(PGO-TRAINING-TARGETS): Likewise.
(PGO_BUILD_TRAINING): Likewise.
(all): Add '+' to the command line for recursive make. Support
the PGO build.
* configure.ac: Add --enable-pgo-build[=lto].
AC_SUBST PGO_BUILD_GEN_CFLAGS, PGO_BUILD_USE_CFLAGS and
PGO_BUILD_LTO_CFLAGS. Enable the PGO build in Makefile.
* Makefile.in: Regenerated.
* configure: Likewise.
An earlier patch changed gdbserver to use the already-built top-level
gnulib and gdbsupport. However, if one did a build that did not
include gdb, then gdbserver would fail to build.
The problem is that configure.ac only adds gnulib and gdbsupport to
the build when gdb is being built. This patch fixes the problem by
arranging for this to happen when gdbserver is built.
ChangeLog
2020-02-17 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac (configdirs): Add gnulib and gdbsupport when building
gdbserver.
This patch moves gdbserver to the top level.
This patch is as close to a pure move as possible -- gdbserver still
builds its own variant of gnulib and gdbsupport. Changing this will
be done in a separate patch.
[v2] Note that, per Simon's review comment, this patch changes the
tree so that gdbserver is not built for or1k or score. This makes
sense, because there is apparently not actually a gdbserver port here.
[v3] This version of the patch also splits out some configury into a
new file, gdbserver/configure.host, so that the top-level configure
script can simply rely on it in order to decide whether gdbserver
should be built.
[v4] This version adds documentation and removes some unnecessary
top-level dependencies.
[v5] Update docs to mention "make all-gdbserver" and change how
top-level configure decides whether to build gdbserver, switching to a
single, shared script.
Tested by the buildbot.
ChangeLog
2020-02-07 Tom Tromey <tom@tromey.com>
Pedro Alves <palves@redhat.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbserver.
* gdbserver: New directory, moved from gdb/gdbserver.
* configure.ac (host_tools): Add gdbserver.
Only build gdbserver on certain systems.
* Makefile.in, configure: Rebuild.
* Makefile.def (host_modules, dependencies): Add gdbserver.
* MAINTAINERS: Add gdbserver.
gdb/ChangeLog
2020-02-07 Tom Tromey <tom@tromey.com>
* README: Update gdbserver documentation.
* gdbserver: Move to top level.
* configure.tgt (build_gdbserver): Remove.
* configure.ac: Remove --enable-gdbserver.
* configure: Rebuild.
* Makefile.in (distclean): Don't mention gdbserver.
Change-Id: I826b7565b54604711dc7a11edea0499cd51ff39e
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
debuginfod is a lightweight web service that indexes ELF/DWARF
debugging resources by build-id and serves them over HTTP. This patch
enables objdump and readelf to query debuginfod servers when they are
otherwise not able to find separate debug files. Binutils can be built
with debuginfod using the --with-debuginfod configure option. This
requires that libdebuginfod be installed and found at configure time.
debuginfod is packaged with elfutils, starting with version 0.178. For
more information see https://sourceware.org/elfutils/.
toplevel* config/debuginfod.m4: New file. Add macro AC_DEBUGINFOD. Adds
new configure option --with-debuginfod.
* configure: Regenerate.
* configure.ac: Call AC_DEBUGINFOD.
binutils* Makefile.am (readelf_LDADD, objdump_LDADD): Add libdebuginfod.
* Makefile.in: Regenerate.
* NEWS: Update.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Call AC_DEBUGINFOD.
* doc/Makefile.in: Regenerate.
* doc/binutils.texi: Add section on using binutils
with debuginfod.
* dwarf.c (debuginfod_fetch_separate_debug_info): New function.
Query debuginfod servers for the target debug file.
(load_separate_debug_info): Call
debuginfod_fetch_separate_debug_info if configured with
debuginfod.
(load_separate_debug_files): Add file argument to
load_separate_debug_info calls.
* dwarf.h (get_build_id): Add declaration.
* objdump.c (get_build_id): New function. Get build-id of file.
* readelf.c (get_build_id): Likewise.
* testsuite/binutils-all/debuginfod.exp: New tests.
* testsuite/binutils-all/linkdebug.s: Add .note.gnu.build-id
section.
gdb should normally not be linked with -static-libstdc++. Currently
this has not caused problems, but it's incompatible with catching an
exception thrown from a shared library -- and a subsequent patch
changes gdb to do just this.
This patch adds a new --with-static-standard-libraries flag to the
top-level configure. It defaults to "auto", which means enabled if
gcc is being built, and disabled otherwise.
ChangeLog
2019-08-19 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Add --with-static-standard-libraries.
This patch moves the gdb/gnulib subdirectory to the top level.
It adjusts the top-level build system to build gnulib when necessary,
and changes gdb to use this. However, gdbserver still builds its own
copy of gnulib, just from the new source location.
A small hack was needed to ensure that gnulib is only built when gdb
is enabled. The Makefile only provides an ordering -- the directory
must be mentioned in configdirs to actually be compiled at all.
Most of the patch is just a "git mv" of gnulib, though a few minor
path adjustments were needed in some files there.
Tested by the buildbot.
ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* MAINTAINERS: Add gnulib.
* gnulib: New directory, move from gdb/gnulib.
* configure.ac (host_libs): Add gnulib.
* configure: Rebuild.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* gnulib: Move directory to top-level.
* configure.ac: Don't configure gnulib.
* configure: Rebuild.
* common/common-defs.h: Use new path to gnulib.
* Makefile.in (GNULIB_BUILDDIR): Now ../gnulib.
(GNULIB_H): Remove.
(INCGNU): Look in new gnulib location.
(HFILES_NO_SRCDIR): Remove gnulib files.
(SUBDIR, REQUIRED_SUBDIRS): Remove gnulib.
(generated_files): Remove GNULIB_H.
($(LIBGNU), all-lib): Remove targets.
(distclean): Don't mention GNULIB_BUILDDIR.
($(GNULIB_BUILDDIR)/Makefile): Remove target.
gdb/gdbserver/ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* configure.ac: Use new path to gnulib.
* configure: Rebuild.
* Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path
to gnulib.
gnulib/ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* update-gnulib.sh: Adjust paths.
* Makefile.in: Adjust paths.
* configure.ac: Adjust paths. Use ACX_LARGEFILE.
* configure: Rebuild.
Revert:
binutls 2019-05-29 Nick Clifton <nickc@redhat.com>
* configure.ac (LIBCTF): Export. Set to empty for non-ELF based
targets.
(HAVE_LIBCTF): Define if libctf support is available.
* Makefile.am (LIBCTF): Set value to @LIBCTF@.
* objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
defined.
* readelf.c: Likewise.
* configure: Regenerate.
* Makefile.in: Regenerate.
* config.in: Regenerate.
top 2019-05-29 Nick Clifton <nickc@redhat.com>
* configure.ac (noconfigdirs): Add libctf if the target does not use
the ELF file format.
* configure: Regenerate.
top * Makefile.def (target_modules): Add libphobos.
(flags_to_pass): Add GDC, GDCFLAGS, GDC_FOR_TARGET and
GDCFLAGS_FOR_TARGET.
(dependencies): Make libphobos depend on libatomic, libbacktrace
configure, and zlib configure.
(language): Add language d.
* Makefile.in: Rebuild.
* Makefile.tpl (BUILD_EXPORTS): Add GDC and GDCFLAGS.
(HOST_EXPORTS): Add GDC.
(POSTSTAGE1_HOST_EXPORTS): Add GDC and GDC_FOR_BUILD.
(BASE_TARGET_EXPORTS): Add GDC.
(GDC_FOR_BUILD, GDC, GDCFLAGS): New variables.
(GDC_FOR_TARGET, GDC_FLAGS_FOR_TARGET): New variables.
(EXTRA_HOST_FLAGS): Add GDC.
(STAGE1_FLAGS_TO_PASS): Add GDC.
(EXTRA_TARGET_FLAGS): Add GDC and GDCFLAGS.
* config-ml.in: Treat GDC and GDCFLAGS like other compiler/flag
environment variables.
* configure: Rebuild.
* configure.ac: Add target-libphobos to target_libraries. Set and
substitute GDC_FOR_BUILD and GDC_FOR_TARGET.
top * configure.ac (noconfigdirs): Add libctf if the target does not use
the ELF file format.
* configure: Regenerate.
binutils* configure.ac (LIBCTF): Export. Set to empty for non-ELF based
targets.
(HAVE_LIBCTF): Define if libctf support is available.
* Makefile.am (LIBCTF): Set value to @LIBCTF@.
* objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
defined.
* readelf.c: Likewise.
* configure: Regenerate.
* Makefile.in: Regenerate.
* config.in: Regenerate.
This ties libctf into the build system, and makes binutils depend on it
(used by the next commits).
* Makefile.def (host_modules): Add libctf.
* Makefile.def (dependencies): Likewise.
libctf depends on zlib, libiberty, and bfd.
* Makefile.in: Regenerated.
* configure.ac (host_libs): Add libctf.
* configure: Regenerated.
libctf/
* Makefile.am: New.
* Makefile.in: Regenerated.
* config.h.in: Likewise.
* aclocal.m4: Likewise.
* configure: Likewise.
