Fix commit 70a38d42c5 ("New entry points for writing Linux NT_PRPSINFO
notes."), <https://sourceware.org/ml/binutils/2013-02/msg00023.html>,
and handle both variants of the 64-bit Linux core PRPSINFO note across
all targets.
The 64-bit Linux core PRPSINFO note matches the 64-bit kernel structure,
defined as follows:
(gdb) ptype struct elf_prpsinfo
type = struct elf_prpsinfo {
char pr_state;
char pr_sname;
char pr_zomb;
char pr_nice;
unsigned long pr_flag;
__kernel_uid_t pr_uid;
__kernel_gid_t pr_gid;
pid_t pr_pid;
pid_t pr_ppid;
pid_t pr_pgrp;
pid_t pr_sid;
char pr_fname[16];
char pr_psargs[80];
}
(gdb)
where the individual data types of most members are the same across all
64-bit Linux ports, with the exception of `__kernel_uid_t' and
`__kernel_gid_t'. These are defined in <asm-generic/posix_types.h> as
32-bit `unsigned int' by default, however overridden as 16-bit `unsigned
short' in port-specific <asm/posix_types.h> for the SuperH target.
The default is already handled, as from the commit referred. Add the
other variant then and provide a backend flag to switch between the two
cases possible, with the 32-bit one being the default and the 16-bit one
explicitly selected. Set the flag in the SuperH target backend. This
arrangement is analogous to how the 32-bit Linux core PRPSINFO note is
handled.
bfd/
* elf-bfd.h (elf_backend_data): Add `linux_prpsinfo64_ugid16'
member.
* elf-linux-core.h (elf_external_linux_prpsinfo64): Rename to...
(elf_external_linux_prpsinfo64_ugid32): ... this.
(swap_linux_prpsinfo32_out): Rename to...
(swap_linux_prpsinfo32_ugid32_out): ... this.
(elf_external_linux_prpsinfo64_ugid16): New structure.
(swap_linux_prpsinfo64_ugid16_out): New function.
* elfxx-target.h [!elf_backend_linux_prpsinfo64_ugid16]
(elf_backend_linux_prpsinfo64_ugid16): Define.
(elfNN_bed): Initialize `linux_prpsinfo64_ugid16' member.
* elf.c (elfcore_write_linux_prpsinfo64): Handle both variants
of the 64-bit Linux core PRPSINFO note.
* elf64-sh64.c (elf_backend_linux_prpsinfo64_ugid16): Define.
Fix commit 70a38d42c5 ("New entry points for writing Linux NT_PRPSINFO
notes."), <https://sourceware.org/ml/binutils/2013-02/msg00023.html>,
and commit b3ac9c7756 ("Put more info in NT_PRPSINFO Linux notes"),
<https://sourceware.org/ml/binutils/2013-02/msg00024.html>, and handle
both variants of the 32-bit Linux core PRPSINFO note across all targets.
The 32-bit Linux core PRPSINFO note matches the 32-bit kernel structure,
defined as follows:
(gdb) ptype struct elf_prpsinfo
type = struct elf_prpsinfo {
char pr_state;
char pr_sname;
char pr_zomb;
char pr_nice;
unsigned long pr_flag;
__kernel_uid_t pr_uid;
__kernel_gid_t pr_gid;
pid_t pr_pid;
pid_t pr_ppid;
pid_t pr_pgrp;
pid_t pr_sid;
char pr_fname[16];
char pr_psargs[80];
}
(gdb)
where the individual data types of most members are the same across all
32-bit Linux ports, with the exception of `__kernel_uid_t' and
`__kernel_gid_t'. These are defined in <asm-generic/posix_types.h> as
32-bit `unsigned int' by default, however overridden as 16-bit `unsigned
short' in port-specific <asm/posix_types.h> for a few targets, mostly
earlier ports of Linux, specifically: ARM, CRIS, FR-V, M32R, m68k,
MN10300/AM33, s390, SuperH, SPARC and i386.
The default is the same as the PowerPC variant already handled, as from
the commits referred. Make the special PowerPC case generic then,
removing the GDB part, and provide a backend flag to switch between the
two cases possible, with the 32-bit one being the default and the 16-bit
one explicitly selected. Set the flag in the target backends affected.
bfd/
* elf-bfd.h (elf_backend_data): Add `linux_prpsinfo32_ugid16'
member.
(elfcore_write_ppc_linux_prpsinfo32): Remove prototype.
* elf32-ppc.c (elfcore_write_ppc_linux_prpsinfo32): Remove.
(elf_external_ppc_linux_prpsinfo32)
(swap_ppc_linux_prpsinfo32_out): Move to...
* elf-linux-core.h (elf_external_linux_prpsinfo32_ugid32)
(swap_linux_prpsinfo32_ugid32_out): ... these.
(elf_external_linux_prpsinfo32): Rename to...
(elf_external_linux_prpsinfo32_ugid16): ... this.
(swap_linux_prpsinfo32_out): Rename to...
(swap_linux_prpsinfo32_ugid16_out): ... this.
* elfxx-target.h [!elf_backend_linux_prpsinfo32_ugid16]
(elf_backend_linux_prpsinfo32_ugid16): Define.
(elfNN_bed): Initialize `linux_prpsinfo32_ugid16' member.
* elf.c (elfcore_write_linux_prpsinfo32): Handle both variants
of the 32-bit Linux core PRPSINFO note.
* elf32-am33lin.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-arm.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-cris.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-frv.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-i386.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-m32r.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-m68k.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-s390.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-sh.c (elf_backend_linux_prpsinfo32_ugid16): Define.
* elf32-sparc.c (elf_backend_linux_prpsinfo32_ugid16): Define.
gdb/
* ppc-linux-tdep.c (ppc_linux_init_abi): Remove call to
`set_gdbarch_elfcore_write_linux_prpsinfo'.
Simple replacement of VEC with std::vector.
gdb/ChangeLog:
* symfile.c (registered_sym_fns): Make struct, not typedef.
(DEF_VEC_O (registered_sym_fns)): Remove.
(symtab_fns): Change type to std::vector.
(add_symtab_fns): Adjust.
(find_sym_fns): Adjust.
There was a problem with generation of the disassembler options for ARC in GDB,
because a BFD architecture name was used as a CPU name, but they have different
meaning even if some architectures have same name as respective CPUs. Target
description specifies a BFD architecture, which is different from ARC CPU, as
accepted by the disassembler (and most other ARC tools), because CPU values are
much more fine grained - there can be multiple CPU values per single BFD
architecture. As a result this code should translate architecture to some CPU
value. Since there is no info on exact CPU configuration, it is best to use
the most feature-rich CPU, so that the disassembler will recognize all
instructions available to the specified architecture.
gdb/ChangeLog
yyyy-mm-dd Anton Kolesov <Anton.Kolesov@synopsys.com>
* arc-tdep.c (arc_gdbarch_init): Pass proper cpu value to disassembler.
* arc-tdep.h (arc_arch_is_em): New function.
(arc_arch_is_hs): Likewise.
gdb/testsuite/ChangeLog
yyyy-mm-dd Anton Kolesov <Anton.Kolesov@synopsys.com>
* gdb.arch/arc-tdesc-cpu.exp: New file.
* gdb.arch/arc-tdesc-cpu.xml: Likewise.
Building bfd/ for DJGPP, I see:
../../src/bfd/bfd.c:642:1: error: conflicting types for '_doprnt'
_doprnt (FILE *stream, const char *format, va_list ap)
^~~~~~~
In file included from ../../src/bfd/sysdep.h:37:0,
from ../../src/bfd/bfd.c:367:
/usr/lib64/gcc/i586-pc-msdosdjgpp/6.1.0/include-fixed/stdio.h:171:5: note: previous declaration of '_doprnt' was here
int _doprnt(const char *_fmt, va_list _args, FILE *_f);
^~~~~~~
Possible fixes the build on other systems too -- _doprnt was/is an
exported symbol on old Unix/BSD systems too.
bfd/ChangeLog:
2017-10-11 Pedro Alves <palves@redhat.com>
* bfd.c (_doprnt): Rename to ...
(_bfd_doprnt): ... this.
(error_handler_internal): Adjust.
GCC commit a94975e57 ("C++ warning on vexing parse") introduces new
warnings "unnecessary parentheses in the declaration of ...". These
cause the build of binutils and gdb to fail. This patch removes those
parentheses for a successful build.
gdb/ChangeLog:
2017-10-11 Egeyar Bagcioglu <egeyar.bagcioglu@oracle.com>
* macrotab.h (macro_lookup_inclusion): Remove unnecessary
parentheses in the declaration.
(macro_lookup_inclusion): Likewise.
(macro_lookup_definition): Likewise.
* p-lang.h (pascal_builtin_types): Likewise.
* tui/tui-data.c (tui_win_list): Likewise.
* tui/tui-data.h (tui_win_list): Likewise.
* utils.h (make_cleanup_free_section_addr_info): Likewise.
(This patch is from Mark Rages <markrages@gmail.com>.)
The Nordic nRF52 memory map, reported from black magic probe:
Num Enb Low Addr High Addr Attrs
0 y 0x00000000 0x00080000 flash blocksize 0x1000 nocache
1 y 0x10001000 0x10001210 flash blocksize 0x210 nocache
2 y 0x20000000 0x20010000 rw nocache
The region at 0x10001000 is "UICR" and it is a section of flash that is
erased all at once.
Notice the odd size: 0x210 is the size of the region defined in the
datasheet.
But because the block size was listed as 0x210, gdb was insisting on
issuing two erase commands divisible by 0x210, starting below 0x10001000.
This patch fixes it by doing the alignment computation from the start of
the region, not from address 0.
gdb/ChangeLog:
* target-memory.c (block_boundaries): Fix for block address not
aligned on block size.
Since x86 check_relocs is called after opening all inputs and garbage
collection, they never see the removed sections. There is no need
for incrementing GOT refcount. But since PLT refcount is also used in
/* Don't create the PLT entry if there are only function pointer
relocations which can be resolved at run-time. */
else if (htab->elf.dynamic_sections_created
&& (h->plt.refcount > eh->func_pointer_refcount
|| eh->plt_got.refcount > 0))
{
we must increment it.
* elf32-i386.c (elf_i386_check_relocs): Set GOT refcount to 1
instead of incrementing it.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
The get_integer_valueof outputs the value it has read as part of the
test name. This causes test names to vary from run to run, and adds
some noise when diffing test results. e.g.:
-PASS: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: killed outside: get integer valueof "mypid" (28770)
+PASS: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: killed outside: get integer valueof "mypid" (32238)
This patch removes that, since it's probably not very useful.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (get_integer_valueof): Don't output read value in test name.
Bump the dwarf-mode version number, so it can be installed by package.el
users who installed an earlier verision.
2017-10-10 Tom Tromey <tom@tromey.com>
* dwarf-mode.el: Bump to version 1.4.
I was recently examining a very large .debug file. I tried to use
dwarf-mode, but it blocked Emacs for a very long time while reading
output.
This patch changes dwarf-mode to run the objdump process asynchronously.
This way, I can still do other things in Emacs while waiting for the
dumping to finish.
2017-10-10 Tom Tromey <tom@tromey.com>
* dwarf-mode.el (dwarf--process, dwarf--deletion-region): New
defvar.
(dwarf--check-running, dwarf--sentinel, dwarf--invoke)
(dwarf--filter): New functions.
(dwarf-do-insert-substructure, dwarf-do-refresh): Call
dwarf--check-running, dwarf--invoke.
(dwarf-browse): Initialize new variables.
Emacs has had lexical binding for a while, and it's a good practice to
use it; so enable it in dwarf-mode.el.
2017-10-10 Tom Tromey <tom@tromey.com>
* dwarf-mode.el: Set lexical-binding.
It's bad Emacs style to define keys from a top-level form. Instead, one
should define a mode map separately and binding keys in the definition.
This lets users completely override the map by defining it before
loading the mode.
2017-10-10 Tom Tromey <tom@tromey.com>
* dwarf-mode.el (dwarf-mode-map): New defvar.
This patch gets rid of catch_exceptions / catch_exceptions_with_msg.
The latter is done mostly by getting rid of the three remaining
vestigial libgdb wrapper functions, which are really pointless
nowadays. This results in a good number of simplifications.
(I checked that Insight doesn't use those functions.)
The gdb.mi/mi-pthreads.exp change is necessary because this actually
fixes a bug, IMO -- the patch stops MI's -thread-select causing output
on the CLI stream.
I.e., before:
-thread-select 123456789
&"Thread ID 123456789 not known.\n"
^error,msg="Thread ID 123456789 not known."
(gdb)
After:
-thread-select 123456789
^error,msg="Thread ID 123456789 not known."
(gdb)
gdb/ChangeLog
2017-10-10 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* breakpoint.c (struct captured_breakpoint_query_args)
(do_captured_breakpoint_query, gdb_breakpoint_query): Delete.
(print_breakpoint): New.
* breakpoint.h (print_breakpoint): Declare.
* common/common-exceptions.h (enum return_reason): Remove
references to catch_exceptions.
* exceptions.c (catch_exceptions, catch_exceptions_with_msg):
Delete.
* exceptions.h (catch_exceptions_ftype, catch_exceptions)
(catch_exception_ftype, catch_exceptions_with_msg): Delete.
* gdb.h: Delete.
* gdbthread.h (thread_select): Declare.
* mi/mi-cmd-break.c: Don't include gdb.h.
(breakpoint_notify): Use print_breakpoint.
* mi/mi-cmd-catch.c: Don't include gdb.h.
* mi/mi-interp.c: Don't include gdb.h.
(mi_print_breakpoint_for_event): New.
(mi_breakpoint_created, mi_breakpoint_modified): Use
mi_print_breakpoint_for_event.
* mi/mi-main.c: Don't include gdb.h.
(mi_cmd_thread_select): Parse the global thread ID here. Use
thread_select instead of gdb_thread_select.
(mi_cmd_thread_list_ids): Output "thread-ids" tuple here instead
of using gdb_list_thread_ids.
* remote-fileio.c (do_remote_fileio_request): Change type. Reply
FILEIO_ENOSYS here.
(remote_fileio_request): Use TRY/CATCH instead of
catch_exceptions.
* symfile-mem.c (struct symbol_file_add_from_memory_args)
(symbol_file_add_from_memory_wrapper): Delete.
(add_vsyscall_page): Use TRY/CATCH instead of catch_exceptions.
* thread.c: Don't include gdb.h.
(do_captured_list_thread_ids, gdb_list_thread_ids): Delete.
(thread_alive): Use thread_select.
(do_captured_thread_select): Delete, parts salvaged as ...
(thread_select): ... this new function.
(gdb_thread_select): Delete.
gdb/testsuite/ChangeLog
2017-10-10 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-pthreads.exp (check_mi_thread_command_set): Don't
expect CLI output.
If you want to use catch_errors with a function with parameters, then
currently you have to manually write a "capture" struct wrapping the
arguments and marshall/unmarshall that.
https://sourceware.org/ml/gdb-patches/2017-09/msg00834.html proposed
adjusting catch_errors to use gdb::function_view, which would allow
passing lambdas with automatic captures. However, it seems like using
TRY/CATCH directly instead ends up producing clearer and easier to
debug code. This is what this commit does.
Note that removing catch_errors exposes further cleanup opportunities
around no longer having to follow catch_errors callback type, and also
removes a few cleanups.
I didn't do anything to save/restore current_uiout because I think
that should be the responsibility of the code that changes
current_uiout in the first place.
(Another approach could be to make catch_errors a variadic template
like:
template<typename Function, typename... Args>
int catch_errors (const char *errstring, return_mask mask,
Function &&func, Args... args);
and then with:
extern void function_with_args (int, int);
extern void function_with_no_args ();
calls to the above functions would be wrapped like this:
catch_errors ("some error happened", RETURN_MASK_ERROR,
function_with_args, arg1, arg2);
catch_errors ("some error happened", RETURN_MASK_ERROR,
function_with_no_args);
but I'm thinking that that doesn't improve much if at all either.)
gdb/ChangeLog
2017-10-10 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* breakpoint.c (breakpoint_cond_eval): Change return type to bool
and reverse logic.
(WP_DELETED, WP_VALUE_CHANGED, WP_VALUE_NOT_CHANGED, WP_IGNORE):
No longer macros. Instead ...
(enum wp_check_result): They're now values of this new
enumeration.
(watchpoint_check): Change return type to wp_check_result and
parameter type to bpstat.
(bpstat_check_watchpoint): Use TRY/CATCH instead of catch_errors.
(bpstat_check_breakpoint_conditions): Use TRY/CATCH instead of
catch_errors. Reverse logic of watchpoint_check call.
(breakpoint_re_set_one): Now returns void and takes a breakpoint
pointer as parameter.
(breakpoint_re_set): Use TRY/CATCH instead of catch_errors.
* common/common-exceptions.c (throw_exception_sjlj): Update
comments to avoid mentioning catch_errors.
* exceptions.c (catch_errors): Delete.
* exceptions.h: Update comments to avoid mentioning catch_errors.
(catch_errors_ftype, catch_errors): Delete.
* infrun.c (normal_stop): Use TRY/CATCH instead of catch_errors.
(hook_stop_stub): Delete.
(restore_selected_frame): Change return type to void, and
parameter type to const frame_id &.
(restore_infcall_control_state): Use TRY/CATCH instead of
catch_errors.
* main.c (captured_command_loop): Return void and remove
parameter. Remove references to catch_errors.
(captured_main): Use TRY/CATCH instead of catch_errors.
* objc-lang.c (objc_submethod_helper_data)
(find_objc_msgcall_submethod_helper): Delete.
(find_objc_msgcall_submethod): Use TRY/CATCH instead of
catch_errors.
* record-full.c (record_full_message): Return void.
(record_full_message_args, record_full_message_wrapper): Delete.
(record_full_message_wrapper_safe): Return bool and use TRY/CATCH
instead of catch_errors.
* solib-aix.c (solib_aix_open_symbol_file_object): Change
parameter type to int.
* solib-darwin.c (open_symbol_file_object): Ditto.
* solib-dsbt.c (open_symbol_file_object): Ditto.
* solib-frv.c (open_symbol_file_object): Ditto.
* solib-svr4.c (open_symbol_file_object): Ditto.
* solib-target.c (solib_target_open_symbol_file_object): Ditto.
* solib.c (update_solib_list): Use TRY/CATCH instead of
catch_errors.
* solist.h (struct target_so_ops) <open_symbol_file_object>:
Change type.
* symmisc.c (struct print_symbol_args): Remove.
(dump_symtab_1): Use TRY/CATCH instead of catch_errors.
(print_symbol): Change type.
* windows-nat.c (handle_load_dll, handle_unload_dll): Return void
and remove parameters.
(catch_errors): New.
(get_windows_debug_event): Adjust.
gdb/testsuite/ChangeLog:
2017-10-10 Pedro Alves <palves@redhat.com>
* lib/selftest-support.exp (selftest_setup): Update for
captured_command_loop's prototype change.
Similar as aarch64 backend, arm backend only overrides the decision on undefined
weak symbols. arm backend part already emits necessary relative relocation for
this case.
bfd/
PR ld/21402
* elf32-arm.c (allocate_dynrelocs_for_symbol): Only make undefined weak
symbols into dynamic.
ld/
PR ld/21402
* testsuite/ld-arm/tls-app.d: Update address.
* testsuite/ld-arm/tls-app.r: Remove relocations.
* testsuite/ld-arm/unresolved-1-dyn.d: Update.
Cache the max alignment of output sections instead of scanning all
output sections for each input section, which can take a very long
time if there are millions of input/output sections.
PR ld/22274
* elfnn-riscv.c (riscv_elf_link_hash_table): Add max_alignment.
(riscv_elf_link_hash_table_create): Initialize max_alignment to
(bfd_vma) -1.
(_bfd_riscv_relax_section): Cache the max alignment of output
sections if possible.
check_relocs was setting up some data used by the --gc-sections
gc_mark_hook. If we change ld to run check_relocs after gc_sections
that data needs to be set up elsewhere. Done by this patch in the
backend check_directives function (ppc64_elf_before_check_relocs).
* elf64-ppc.c (ppc64_elf_before_check_relocs): Set sec_type for
.opd whenever .opd is present and non-zero size. Move code
setting abiversion to/from output file earlier. Only set
u.opd.func_sec when --gc-sections. Read relocs and set up
u.opd.func_sec values here..
(ppc64_elf_check_relocs): ..rather than here. Simplify opd
section tests.
(ppc64_elf_edit_opd): Don't set sec_type for .opd here.
There were two copies of earmelf_fuchsia.c dependencies.
* Makefile.am (earmelfb_fuchsia.c): Rename rule from earmelf_fuchsia.c.
* Makefile.in: Regenerate.
One spot in gdb uses a cleanup to free a splay tree. This patch
introduces a unique_ptr specialization for this case.
ChangeLog
2017-10-09 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (free_splay_tree): Remove.
(list_available_thread_groups): Use splay_tree_up.
* common/gdb_splay_tree.h: New file.
The do_nothing function in mi-main.c is used as a splay tree
key-deleting function; but NULL serves the same purpose and is used
elsewhere in gdb. This patch removes the unneeded function.
ChangeLog
2017-10-09 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (do_nothing): Remove.
(list_available_thread_groups): Update.
Since ELF linker may cache internal symbol table in init_reloc_cookie,
we should check if it is cached, before free it.
* elf-m10300.c (mn10300_elf_check_relocs): Don't free cached
isymbuf.
Don't create the .interp section with "ld --no-dynamic-linker". This
fixed:
FAIL: PR ld/20828 forcibly exported symbol version without section GC
FAIL: PR ld/20828 forcibly exported symbol version with section GC
FAIL: readelf version information
* elf32-bfin.c (bfin_size_dynamic_sections): Don't create the
.interp section with "ld --no-dynamic-linker".
The gdb.multi/multi-arch-exec.exp testcase currently tests execing
from -m64 to -m32, but does not test the other direction. For
thoroughness, this commit fixes that. Without the fix in the previous
commit for example ("Multi-arch exec, more register reading
avoidance"), on x86_64 we would get different symptoms depending on
"execing direction". Vis:
Continuing.
Truncated register 50 in remote 'g' packet
Truncated register 50 in remote 'g' packet
(gdb) FAIL: gdb.multi/multi-arch-exec.exp: first_arch=1: selected_thread=2: follow_exec_mode=same: continue across exec that changes architecture
Vs:
Continuing.
Remote 'g' packet reply is too long (expected 440 bytes, got 816 bytes): daffffffffffffff0000[snip]
Remote 'g' packet reply is too long (expected 440 bytes, got 816 bytes): daffffffffffffff0000[snip]
(gdb) FAIL: gdb.multi/multi-arch-exec.exp: first_arch=2: selected_thread=2: follow_exec_mode=same: continue across exec that changes architecture
gdb/testsuite/ChangeLog:
2017-10-09 Pedro Alves <palves@redhat.com>
Test both arch1=>arch2 and arch2=>arch1.
* gdb.multi/multi-arch-exec.exp (exec1, srcfile1, binfile1, exec2)
(srcfile2, binfile2, march1, march2): Remove globals. Largely
factored out to...
(append_arch1_options, append_arch2_options, append_arch_options)
(build_executables): New procedures.
(do_test): New 'first_arch' parameter. Use it to define 'from_exec'
local.
(top level): Add new 'first_arch' testing axis.
As mentioned in commit bf93d7ba99 ("Add thread after updating
gdbarch when exec'ing"), we should avoid doing register reads after a
process does an exec and before we've updated that inferior's gdbarch.
Otherwise, we may interpret the registers using the wrong
architecture.
There's still (at least) one case where we still read registers
post-exec with the pre-exec architecture. That's when infrun decides
it needs to switch context to the exec'ing thread. I.e., if the exec
event is processed at a time when the current thread is not already
the exec'ing thread, then we get (with the test added by this commit):
continue
Continuing.
Truncated register 50 in remote 'g' packet
Truncated register 50 in remote 'g' packet
(gdb) FAIL: gdb.multi/multi-arch-exec.exp: selected_thread=2: follow_exec_mode=same: continue across exec that changes architecture
The fix is to avoid reading registers when switching context in this
case.
(I'd be nice to get rid of the constant stop_pc reading when switching
threads, but that'd be a deeper change.)
gdb/ChangeLog:
2017-10-09 Pedro Alves <palves@redhat.com>
* infrun.c (handle_inferior_event_1) <TARGET_WAITKIND_EXECD>: Skip
reading registers when switching context.
gdb/testsuite/ChangeLog:
2017-10-09 Pedro Alves <palves@redhat.com>
* gdb.multi/multi-arch-exec.c: Include <pthread.h> and <assert.h>.
(barrier): New.
(thread_start, all_started): New functions.
(main): Spawn new thread and wait until it is scheduled.
* gdb.multi/multi-arch-exec.exp: Build $srcfile1 with the pthreads
option.
(do_test): Add 'selected_thread' parameter. Run to all_started
instead of main. Explicitly set the breakpoint at main. Switch
to the SELECTED_THREAD thread.
(top level): Test handling the exec event with either the main
thread or the second thread selected.
FreeBSD architectures are either ILP32 or LP64 resulting in two
different layouts for siginfo_t. Previously, the 'bits_per_word'
member of bfd_arch_info was used to determine the layout to use for a
given FreeBSD architecture. However, mipsn32 architectures inherit
from a 64-bit mips architecture where bits_per_word is 64. As a
result, $_siginfo was not properly extracted from FreeBSD/mipsn32 core
dumps. Fix this by using gdbarch_long_bit instead of 'bits_per_word'
to determine if a FreeBSD architecture is ILP32 or LP64.
gdb/ChangeLog:
* fbsd-nat.c (fbsd_siginfo_size): Use gdbarch_long_bit.
(fbsd_convert_siginfo): Likewise.
* fbsd-tdep.c (fbsd_core_xfer_siginfo): Likewise.
GDB currently doesn't build with Guile 2.2 (see PR 21104). If one has
both Guile 2.2 and 2.0 installed, GDB will pick up Guile 2.2 first and
fail building. Until somebody does the work of adapting the GDB code to
Guile 2.2, we should not try using it. This patch therefore removes it
from configure.
gdb/ChangeLog:
* configure.ac (try_guile_versions): Remove guile-2.2.
* configure: Regenerate.
prno, tpei, and irbm are missing in the optable.
gas/ChangeLog:
2017-10-09 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* testsuite/gas/s390/zarch-arch12.d (prno, tpei, irbm): New
instructions added.
* testsuite/gas/s390/zarch-arch12.s: Likewise.
* testsuite/gas/s390/zarch-z13.d: Rename ppno to prno.
opcodes/ChangeLog:
2017-10-09 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.txt (prno, tpei, irbm): New instructions added.
The recent POP adjusted a few of the instruction formats. This patch
adjusts our optable accordingly. No user visible change - hopefully.
opcodes/ChangeLog:
2017-10-09 Heiko Carstens <heiko.carstens@de.ibm.com>
* s390-opc.c (INSTR_SI_RD): New macro.
(INSTR_S_RD): Adjust example instruction.
* s390-opc.txt (lpsw, ssm, ts): Change S_RD instruction format to
SI_RD.
Commit f38307f5 changed COMPILE.post and POSTCOMPILE to remove
$(basename) from the dependency file name computation. However, it
did not update the `-include' at the end of the Makefile.in; this in
effect disabled automatic dependency tracking.
This patch restores the $(basename) wrapper so that the dependency
files are named "file.Po" rather than "file.o.Po".
I also tested the non-gcc3 dependency mode, which pointed out that
this case hadn't been working since the switch to C++. This is also
fixed in this patch.
Tested by rebuilding.
ChangeLog
2017-10-09 Tom Tromey <tom@tromey.com>
* Makefile.in (COMPILE.post, POSTCOMPILE): Restore $(basename).
(COMPILE.pre): Use $(CXX).
Use the type system instead of callers needing to know how the
returned string's memory is supposed to be managed.
gdb/ChangeLog:
2017-10-09 Pedro Alves <palves@redhat.com>
* cp-support.c (cp_remove_params): Return a gdb::unique_xmalloc_ptr.
Use bool.
(overload_list_add_symbol): Adjust to use gdb::unique_xmalloc_ptr.
* cp-support.h (cp_remove_params): Now returns a
gdb::unique_xmalloc_ptr.
* dwarf2read.c (find_slot_in_mapped_hash): Now returns bool.
Adjust to cp_remove_params returning a gdb::unique_xmalloc_ptr.
* psymtab.c (psymtab_search_name): Adjust to cp_remove_params
returning a gdb::unique_xmalloc_ptr.
(lookup_partial_symbol): Adjust to use gdb::unique_xmalloc_ptr.
* stack.c (find_frame_funname): Adjust to cp_remove_params
returning a gdb::unique_xmalloc_ptr.
Fix a typo introduced in commit c56e7c4390 ("Make ctxobj.exp and
print-file-var.exp work on all platforms.").
This doesn't really affect the outcome of the testcase. I only
noticed the typo because I stepped through the program manually.
To avoid such problems if the test is extended, this moves the STOP
marker until after the program self-validates the values. With the
typo in place, this alone would have resulted in a test FAIL. I.e.,
it'd have caught the typo.
gdb/testsuite/ChangeLog:
2017-10-09 Pedro Alves <palves@redhat.com>
* gdb.base/print-file-var-main.c: Fix get_version_2 value check
logic. Move STOP marker after the value checks.
* gdb.base/print-file-var.exp (continue to STOP marker): Tighten
regexp.
Don't allow '~' as the first character in symbol name in linker script.
PR ld/22267
* ldlex.l (SYMBOLNAMECHAR1) New.
(DEFSYMEXP): Replace FILENAMECHAR1 with SYMBOLNAMECHAR1.
(EXPRESSION): Likewise.
* testsuite/ld-scripts/expr.exp: Run pr22267.
* testsuite/ld-scripts/pr22267.d: New file.
* testsuite/ld-scripts/pr22267.s: Likewise.
* testsuite/ld-scripts/pr22267.t: Likewise.
This removes a number of cleanups from dwarf2read.c in a
straightforward way.
Note that some places in dwarf2read create dangling cleanups. I don't
believe any of the changes in this patch interact with those spots.
Regression tested by the buildbot.
gdb/ChangeLog
2017-10-08 Tom Tromey <tom@tromey.com>
* dwarf2read.c (dwarf2_get_dwz_file): Use
gdb::unique_xmalloc_ptr.
(find_slot_in_mapped_hash): Likewise.
(dwarf2_physname): Likewise.
(create_dwo_unit_in_dwp_v1): Use std::string.
(create_dwo_unit_in_dwp_v2): Likewise.
(lookup_dwo_cutu): Likewise.
(inherit_abstract_dies): Use std::vector.
(read_array_type): Likewise.
(dwarf_decode_macros): Remove unused declaration.
(unsigned_int_compar): Remove.
(dwarf2_build_psymtabs_hard): Use scoped_restore.
(psymtabs_addrmap_cleanup): Remove.
Currently frame_prepare_for_sniffer returns a cleanup. This patch
changes it to return void, and exposes frame_cleanup_after_sniffer to
the caller.
Normally I would write an RAII class for this sort of thing; but
because there was just a single caller of frame_prepare_for_sniffer,
and because this caller is already using try/catch, I thought it
seemed ok to require explicit calls in this instance.
Regression tested by the buildbot.
gdb/ChangeLog
2017-10-08 Tom Tromey <tom@tromey.com>
* frame-unwind.c (frame_unwind_try_unwinder): Update.
* frame.h (frame_cleanup_after_sniffer): Declare.
(frame_prepare_for_sniffer): Return void.
* frame.c (frame_cleanup_after_sniffer): No longer static. Change
type of argument.
(frame_prepare_for_sniffer): Return void.
This removes make_cleanup_value_free, in favor of a unique_ptr
specialization.
Regression tested by the buildbot.
gdb/ChangeLog
2017-10-08 Tom Tromey <tom@tromey.com>
* utils.h (make_cleanup_value_free): Remove.
* utils.c (do_value_free, struct cleanup): Remove.
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full) <DWARF_VALUE_STACK>:
Use gdb_value_up.
* value.h (struct value_deleter): New.
(gdb_value_up): New typedef.
This changes search_symbols to return a std::vector, replacing the
previous linked list approach. This allows the removal of some
cleanups, as well as the use of std::sort and std::unique, saving some
code and extra allocations in sort_search_symbols_remove_dups.
Regression tested by the buildbot.
gdb/ChangeLog
2017-10-08 Tom Tromey <tom@tromey.com>
* symtab.c (free_search_symbols, do_free_search_symbols_cleanup)
(make_cleanup_free_search_symbols): Remove.
(search_symbols): Return std::vector.
(symbol_search::compare_search_syms): Now member of
symbol_search. Change arguments.
(sort_search_symbols_remove_dups): Change arguments. Rewrite.
(symtab_symbol_info, rbreak_command): Update.
* symtab.h (struct symbol_search) <next>: Remove.
Add constructors.
(symbol_search::operator<): New function.
(symbol_search::operator==): New function.
(search_symbols): Remove std::vector.
(free_search_symbols, make_cleanup_free_search_symbols): Remove.
(symbol_search::compare_search_syms): Declare.
