1) GOT entries generated for any of the GOT TLS relocations don't need
dynamic relocations for locally defined symbols in PIEs. In the case
of a tls_index doubleword, the dtpmod entry is known to be 1, and the
dtprel entry is also known at link time and relative. Similarly,
dtprel and tprel words are known at link time and relative. (GOT
entries for other than TLS symbols are not relative and thus need
dynamic relocations in PIEs.)
2) Local dynamic TLS code is really only meant for accesses local to
the current binary. There was a cheapskate test for this before using
the common tlsld_got slot, but the test wasn't exactly correct and
might confuse anyone looking at the code. The proper test,
SYMBOL_REFERENCES_LOCAL isn't so expensive that it should be avoided.
3) The same cheap test for local syms when optimising TLS sequences
should be SYMBOL_REFERENCES_LOCAL too.
bfd/
* elf64-ppc.c (ppc64_elf_check_relocs): Move initialisation of vars.
(ppc64_elf_tls_optimize): Correct is_local condition.
(allocate_got): Don't reserve dynamic relocations for any of the
tls got relocs in PIEs when the symbol is local.
(allocate_dynrelocs): Correct validity test for local sym using
tlsld_got slot.
(ppc64_elf_size_dynamic_sections): Don't reserve dynamic relocations
for any of the tls got relocs in PIEs.
(ppc64_elf_layout_multitoc): Likewise.
(ppc64_elf_relocate_section): Correct validity test for local sym
using tlsld_got slot. Don't emit dynamic relocations for any of
the tls got relocs in PIEs when the symbol is local.
* elf32-ppc.c (ppc_elf_tls_optimize): Correct is_local condition.
(got_relocs_needed): Delete.
(allocate_dynrelocs): Correct validity test for local sym using
tlsld_got slot. Don't reserve dynamic relocations for any of the
tls got relocs in PIEs when the symbol is local.
(ppc_elf_size_dynamic_sections): Don't reserve dynamic relocations
for any of the tls got relocs in PIEs.
(ppc_elf_relocate_section): Correct validity test for local sym
using tlsld_got slot. Don't emit dynamic relocations for any of
the tls got relocs in PIEs when the symbol is local.
ld/
* testsuite/ld-powerpc/tlsso.d: Adjust to suit tlsld_got usage change.
* testsuite/ld-powerpc/tlsso.g: Likewise.
* testsuite/ld-powerpc/tlsso.r: Likewise.
* testsuite/ld-powerpc/tlsso32.d: Likewise.
* testsuite/ld-powerpc/tlsso32.g: Likewise.
* testsuite/ld-powerpc/tlsso32.r: Likewise.
On 64-bit host the 32-bit addend was loaded without sign extension into
an unsigned long.
bfd/ChangeLog:
PR ld/25062
* elf32-arm.c (elf32_arm_final_link_relocate): Sign extend data.
ld/ChangeLog:
PR ld/25062
* testsuite/ld-arm/arm-elf.exp: Update.
* testsuite/ld-arm/tls-gdesc-neg.d: New test.
* testsuite/ld-arm/tls-gdesc-neg.s: New test.
This is quite complicated because the CTF section's contents depend on
the final contents of the symtab and strtab, because it has two sections
whose contents are shuffled to be in 1:1 correspondence with the symtab,
and an internal strtab that gets deduplicated against the ELF strtab
(with offsets adjusted to point into the ELF strtab instead). It is
also compressed if large enough, so its size depends on its contents!
So we cannot construct it as early as most sections: we cannot even
*begin* construction until after the symtab and strtab are finalized.
Thankfully there is already one section treated similarly: compressed
debugging sections: the only differences are that compressed debugging
sections have extra handling to deal with their changing name if
compressed (CTF sections are always called ".ctf" for now, though we
have reserved ".ctf.*" against future use), and that compressed
debugging sections have previously-uncompressed content which has to be
stashed away for later compression, while CTF sections have no content
at all until we generate it (very late).
BFD also cannot do the link itself: libctf knows how to do it, and BFD
cannot call libctf directly because libctf already depends on bfd for
file I/O. So we have to use a pair of callbacks, one, examine_strtab,
which allows a caller to examine the symtab and strtab after
finalization (called from elf_link_swap_symbols_out(), right before the
symtabs are written, and after the strtab has been finalized), and one
which actually does the emission (called emit_ctf simply because it is
grouped with a bunch of section-specific late-emission function calls at
the bottom of bfd_elf_final_link, and a section-specific name seems best
for that). emit_ctf is actually called *twice*: once from lang_process
if the emulation suggests that this bfd target does not examine the
symtab or strtab, and once via a bfd callback if it does. (This means
that non-ELF targets still get CTF emitted, even though the late CTF
emission stage is never called for them).
v2: merged with non-ELF support patch: slight commit message
adjustments.
v3: do not spend time merging CTF, or crash, if the CTF section is
explicitly discarded. Do not try to merge or compress CTF unless
linking.
v4: add CTF_COMPRESSION_THRESHOLD. Annul the freed input ctf_file_t's
after writeout: set SEC_IN_MEMORY on the output contents so a future
bfd enhancement knows it could free it. Add SEC_LINKER_CREATED |
SEC_KEEP to avoid having to add .ctf to the linker script. Drop
now-unnecessary ldlang.h-level elf-bfd.h include and hackery around
it. Adapt to elf32.em->elf.em and elf-generic.em->ldelf*.c
changes.
v5: fix tabdamage. Drop #inclusions in .h files: include in .c files,
.em files, and use struct forwards instead. Use bfd_section_is_ctf
inline function rather than SECTION_IS_CTF macro. Move a few
comments.
* Makefile.def (dependencies): all-ld depends on all-libctf.
* Makefile.in: Regenerated.
include/
* bfdlink.h (elf_strtab_hash): New forward.
(elf_sym_strtab): Likewise.
(struct bfd_link_callbacks <examine_strtab>): New.
(struct bfd_link_callbacks <emit_ctf>): Likewise.
bfd/
* elf-bfd.h (bfd_section_is_ctf): New inline function.
* elf.c (special_sections_c): Add ".ctf".
(assign_file_positions_for_non_load_sections): Note that
compressed debugging sections etc are not assigned here. Treat
CTF sections like SEC_ELF_COMPRESS sections when is_linker_output:
sh_offset -1.
(assign_file_positions_except_relocs): Likewise.
(find_section_in_list): Note that debugging and CTF sections, as
well as reloc sections, are assigned later.
(_bfd_elf_assign_file_positions_for_non_load): CTF sections get
their size and contents updated.
(_bfd_elf_set_section_contents): Skip CTF sections: unlike
compressed sections, they have no uncompressed content to copy at
this stage.
* elflink.c (elf_link_swap_symbols_out): Call the examine_strtab
callback right before the strtab is written out.
(bfd_elf_final_link): Don't cache the section contents of CTF
sections: they are not populated yet. Call the emit_ctf callback
right at the end, after all the symbols and strings are flushed
out.
ld/
* ldlang.h: (struct lang_input_statement_struct): Add the_ctf.
(struct elf_sym_strtab): Add forward.
(struct elf_strtab_hash): Likewise.
(ldlang_ctf_apply_strsym): Declare.
(ldlang_write_ctf_late): Likewise.
* ldemul.h (ldemul_emit_ctf_early): New.
(ldemul_examine_strtab_for_ctf): Likewise.
(ld_emulation_xfer_type) <emit_ctf_early>: Likewise.
(ld_emulation_xfer_type) <examine_strtab_for_ctf>: Likewise.
* ldemul.c (ldemul_emit_ctf_early): New.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldlang.c: Include ctf-api.h.
(CTF_COMPRESSION_THRESHOLD): New.
(ctf_output): New. Initialized in...
(ldlang_open_ctf): ... this new function. Open all the CTF
sections in the input files: mark them non-loaded and empty
so as not to copy their contents to the output, but linker-created
so the section gets created in the target.
(ldlang_merge_ctf): New, merge types via ctf_link_add_ctf and
ctf_link.
(ldlang_ctf_apply_strsym): New, an examine_strtab callback: wrap
ldemul_examine_strtab_for_ctf.
(lang_write_ctf): New, write out the CTF section.
(ldlang_write_ctf_late): New, late call via bfd's emit_ctf hook.
(lang_process): Call ldlang_open_ctf, ldlang_merge_ctf, and
lang_write_ctf.
* ldmain.c (link_callbacks): Add ldlang_ctf_apply_strsym,
ldlang_write_ctf_late.
* emultempl/aix.em: Add ctf-api.h.
* emultempl/armcoff.em: Likewise.
* emultempl/beos.em: Likewise.
* emultempl/elf.em: Likewise.
* emultempl/generic.em: Likewise.
* emultempl/linux.em: Likewise.
* emultempl/msp430.em: Likewise.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/ticoff.em: Likewise.
* emultempl/vanilla.em: Likewise.
* ldcref.c: Likewise.
* ldctor.c: Likewise.
* ldelf.c: Likewise.
* ldelfgen.c: Likewise.
* ldemul.c: Likewise.
* ldexp.c: Likewise.
* ldfile.c: Likewise.
* ldgram.c: Likewise.
* ldlex.l: Likewise.
* ldmain.c: Likewise.
* ldmisc.c: Likewise.
* ldver.c: Likewise.
* ldwrite.c: Likewise.
* lexsup.c: Likewise.
* mri.c: Likewise.
* pe-dll.c: Likewise.
* plugin.c: Likewise.
* ldelfgen.c (ldelf_emit_ctf_early): New.
(ldelf_examine_strtab_for_ctf): tell libctf about the symtab and
strtab.
(struct ctf_strsym_iter_cb_arg): New, state to do so.
(ldelf_ctf_strtab_iter_cb): New: tell libctf about
each string in the strtab in turn.
(ldelf_ctf_symbols_iter_cb): New, tell libctf
about each symbol in the symtab in turn.
* ldelfgen.h (struct elf_sym_strtab): Add forward.
(struct elf_strtab_hash): Likewise.
(struct ctf_file): Likewise.
(ldelf_emit_ctf_early): Declare.
(ldelf_examine_strtab_for_ctf): Likewise.
* emultempl/elf-generic.em (LDEMUL_EMIT_CTF_EARLY): Set it.
(LDEMUL_EXAMINE_STRTAB_FOR_CTF): Likewise.
* emultempl/aix.em (ld_${EMULATION_NAME}_emulation): Add
emit_ctf_early and examine_strtab_for_ctf, NULL by default.
* emultempl/armcoff.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/beos.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/elf.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/generic.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/linux.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/msp430.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/pe.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/pep.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/ticoff.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/vanilla.em (ld_vanilla_emulation): Likewise.
* Makefile.am: Pull in libctf (and zlib, a transitive requirement
for compressed CTF section emission). Pass it on to DejaGNU.
* configure.ac: Add AM_ZLIB.
* aclocal.m4: Added zlib.m4.
* Makefile.in: Regenerated.
* testsuite/ld-bootstrap/bootstrap.exp: Use it when relinking ld.
gcc10 on x86_64 and powerpc64le recognises that the loop in
Foo::operator= can be turned into a call to memmove, which then
results in an undefined symbol when linking. Avoid that by making the
loop smaller.
* testsuite/ld-srec/sr3.cc (FOO_MSG_LEN): Set to 4.
For the lui and auipc relaxations, since the symbol value of an undefined weak
symbol is always be zero, we can optimize the patterns into a single LI/MV/ADDI
instruction.
bfd/
* elfnn-riscv.c (riscv_pcgp_hi_reloc): Add new field undefined_weak.
(riscv_record_pcgp_hi_reloc): New parameter undefined_weak.
Set undefined_weak field from it.
(relax_func_t): New parameter undefined_weak.
(_bfd_riscv_relax_call): New ignored parameter undefined_weak.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_delete): Likewise.
(_bfd_riscv_relax_lui): New parameter undefined_weak. If true,
allow relaxing. For LO12* relocs, set rs1 to x0 when undefined_weak.
(_bfd_riscv_relax_pc): New parameter undefined_weak. For LO12* relocs,
set undefined_weak from hi_reloc. If true, allow relaxing. For LO12*
relocs, set rs1 to x0 when undefined_weak and change to non-pcrel
reloc.
(_bfd_riscv_relax_section): New local undefined_weak. Set for
undef weak relocs that can be relaxed. Pass to relax_func call.
ld/
* testsuite/ld-riscv-elf/weakref32.s: Add relaxable undef weak code.
* testsuite/ld-riscv-elf/weakref64.s: Likewise.
* testsuite/ld-riscv-elf/weakref32.d: Updated.
* testsuite/ld-riscv-elf/weakref64.d: Updated.
The loads and stores handled in the second instruction of a sequence
marked by R_PPC64_PCREL_OPT may be a prefix instruction. For example:
pld ra,symbol@got@pcrel
0:
pld rt,off(ra)
.reloc 0b-8,R_PPC64_PCREL_OPT,(.-8)-(0b-8)
can be optimised to
pld rt,symbol+off@pcrel
pnop
* elf64-ppc.c (xlate_pcrel_opt): Handle prefix loads and stores
in second instruction.
(ppc64_elf_relocate_section): Likewise.
This patch fixes a few linker crashes due to TLS code reaching an assert when it
shouldn't.
The first scenario is with weak TLS symbols that remain weak during linking. In
this case the mid-end would not have seen a TLS symbol and so wouldn't have
allocated the TLS section. We currently assert here and the linker crashes with
a not very useful message.
This patch changes this to return the value 0 for the TLS symbol in question
emulating what lld and gold and other BFD targets do. However because weak TLS
is implementation defined and we don't define any behavior for it I also emit a
warning to the user to inform them of such.
Secondly when a strong TLS reference is undefined. The linker crashes even after
it correctly reported that there is an undefined reference. This changes it so
that it gracefully exits and reports a useful error.
bfd/ChangeLog:
PR ld/24601
* elfnn-aarch64.c (aarch64_relocate): Handle weak TLS and undefined TLS.
Also Pass input_bfd to _bfd_aarch64_elf_resolve_relocation.
* elfxx-aarch64.c (_bfd_aarch64_elf_resolve_relocation): Use it.
* elfxx-aarch64.h (_bfd_aarch64_elf_resolve_relocation): Emit warning
for weak TLS.
ld/ChangeLog:
PR ld/24601
* testsuite/ld-aarch64/aarch64-elf.exp (undef-tls, weak-tls): New.
* testsuite/ld-aarch64/undef-tls.d: New test.
* testsuite/ld-aarch64/undef-tls.s: New test.
* testsuite/ld-aarch64/weak-tls.d: New test.
* testsuite/ld-aarch64/weak-tls.s: New test.
We currently use a padding NOP after a Thumb to Arm interworking veneer (BX pc).
The NOP is never executed but may result in a performance penalty on some cores.
For this reason this patch changes the NOPs after Thumb to Arm veneers into B .-2
and adds a note to this in the source code for future reference.
bfd/ChangeLog:
* elf32-arm.c (elf32_thumb2_plt_entry, elf32_arm_plt_thumb_stub,
elf32_arm_stub_long_branch_v4t_thumb_thumb,
elf32_arm_stub_long_branch_v4t_thumb_arm,
elf32_arm_stub_short_branch_v4t_thumb_arm,
elf32_arm_stub_long_branch_v4t_thumb_arm_pic,
elf32_arm_stub_long_branch_v4t_thumb_thumb_pic,
elf32_arm_stub_long_branch_v4t_thumb_tls_pic): Change nop to branch to
previous instruction.
ld/ChangeLog:
* testsuite/ld-arm/cortex-a8-fix-b-plt.d: Update Testcase.
* testsuite/ld-arm/cortex-a8-fix-b-rel-arm.d: Likewise.
* testsuite/ld-arm/cortex-a8-fix-bcc-plt.d: Likewise.
* testsuite/ld-arm/farcall-cond-thumb-arm.d: Likewise.
* testsuite/ld-arm/farcall-mixed-app.d: Likewise.
* testsuite/ld-arm/farcall-mixed-app2.d: Likewise.
* testsuite/ld-arm/farcall-mixed-lib-v4t.d: Likewise.
* testsuite/ld-arm/farcall-thumb-arm-pic-veneer.d: Likewise.
* testsuite/ld-arm/farcall-thumb-arm-short.d: Likewise.
* testsuite/ld-arm/farcall-thumb-arm.d: Likewise.
* testsuite/ld-arm/farcall-thumb-thumb-pic-veneer.d: Likewise.
* testsuite/ld-arm/farcall-thumb-thumb.d: Likewise.
* testsuite/ld-arm/fix-arm1176-on.d: Likewise.
* testsuite/ld-arm/ifunc-10.dd: Likewise.
* testsuite/ld-arm/ifunc-2.dd: Likewise.
* testsuite/ld-arm/ifunc-4.dd: Likewise.
* testsuite/ld-arm/ifunc-6.dd: Likewise.
* testsuite/ld-arm/ifunc-8.dd: Likewise.
* testsuite/ld-arm/jump-reloc-veneers-long.d: Likewise.
* testsuite/ld-arm/mixed-app.d: Likewise.
* testsuite/ld-arm/thumb2-b-interwork.d: Likewise.
* testsuite/ld-arm/tls-longplt.d: Likewise.
* testsuite/ld-arm/tls-thumb1.d: Likewise.
commit 83924b3846
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Tue Feb 5 18:45:23 2019 -0800
x86-64: Restore PIC check for PCREL reloc against protected symbol
moved PIC check for PC-relative relocations to elf_x86_64_check_relocs.
Since linker defined symbols may not be processed at the time, we need
to move the check back to elf_x86_64_relocate_section.
bfd/
PR ld/24905
* elf64-x86-64.c (elf_x86_64_check_relocs): Move PIC check for
PC-relative relocations back to ...
(elf_x86_64_relocate_section): Here.
ld/
PR ld/24905
* testsuite/ld-x86-64/pr24905-x32.d: New file.
* testsuite/ld-x86-64/pr24905.d: Likewise.
* testsuite/ld-x86-64/pr24905.s: Likewise.
* testsuite/ld-x86-64/pr24905.t: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr24905 and pr24905-x32.
This fixes a problem originally reported at
https://github.com/riscv/riscv-binutils-gdb/issues/173
If you have code linked at address zero, you can have a lui instruction
loading a value 0x800 which gets relaxed to a c.lui which is valid (c.lui 0x1
followed by addi -0x800). Relaxation can reduce the value below 0x800 at which
point the c.lui 0x0 is no longer valid. We can fix this by converting the
c.lui to a c.li which can load 0.
bfd/
* elfnn-riscv.c (perform_relocation) <R_RISCV_RVC_LUI>: If
RISCV_CONST_HIGH_PART (value) is zero, then convert c.lui instruction
to c.li instruction, and use ENCODE_RVC_IMM to set value.
ld/
* testsuite/ld-riscv-elf/c-lui-2.d: New.
* testsuite/ld-riscv-elf/c-lui-2.ld: New.
* testsuite/ld-riscv-elf/c-lui-2.s: New.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run the c-lui-2 test.
This patch is a reimplementation of [1] which was submitted in 2015 by
Neil Schellenberger. Copyright issue was sorted out [2] last year.
It proposed a new section (.gnu.xhash) and related dynamic tag
(DT_GNU_XHASH). The new section would be virtually identical to the
existing .gnu.hash except for the translation table (xlat) which would
contain correct MIPS .dynsym indexes corresponding to the hashvals in
chains. This is because MIPS ABI imposes a different ordering on the
dynsyms than the one expected by the .gnu.hash section. Another addition
would be a leading word (ngnusyms) which would contain the number of
entries in the translation table.
In this patch, the new section name and dynamic tag are changed to
reflect the fact that the section should be treated as MIPS-specific
(.MIPS.xhash and DT_MIPS_XHASH).
This patch addresses the alignment issue as reported in [3], which is
caused by the leading word added to the .MIPS.xhash section. Leading word
is removed in this patch, and the number of entries in the translation
table is now calculated using DT_MIPS_SYMTABNO dynamic tag (this is
addressed by the corresponding glibc patch).
Suggestions on coding style in [4] were taken into account. Existing
GNU hash testcase was covered, and another one was added in the MIPS
part of the testsuite.
The other major change is reserving MIPS ABI version 5 for .MIPS.xhash,
marking the need of support for .MIPS.xhash in the dynamic linker (again,
addressed in the corresponding glibc patch). This is something which I
am not sure of, especially after reading [5]. I am confused on whether
this ABI version is reserved for IFUNC, or it can be used for this
purpose.
Already mentioned glibc patch is submitted at:
https://sourceware.org/ml/libc-alpha/2019-06/msg00456.html
[1] https://sourceware.org/ml/binutils/2015-10/msg00057.html
[2] https://sourceware.org/ml/binutils/2018-03/msg00025.html
[3] https://sourceware.org/ml/binutils/2016-01/msg00006.html
[4] https://sourceware.org/ml/binutils/2016-02/msg00097.html
[5] https://sourceware.org/ml/libc-alpha/2016-12/msg00853.html
ld * emulparams/elf32bmip.sh: Add .MIPS.xhash section.
* emulparams/elf32bmipn32-defs.sh: Add .MIPS.xhash section.
* emulparams/elf64bmip-defs.sh: Add .MIPS.xhash section.
* emultempl/mipself.em: Remove mips_after_parse function.
* testsuite/ld-elf/hash.d: Update comment.
* testsuite/ld-mips-elf/hash1.d: New test.
* testsuite/ld-mips-elf/hash1.s: Ditto.
* testsuite/ld-mips-elf/hash1a.d: Remove.
* testsuite/ld-mips-elf/hash1b.d: Ditto.
* testsuite/ld-mips-elf/hash1c.d: Ditto
* testsuite/ld-mips-elf/hash2.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: New tests.
* testsuite/ld-mips-elf/start.s: New test.
bfd * elf-bfd.h (struct elf_backend_data): New members.
* elflink.c (_bfd_elf_link_create_dynamic_sections): Create
.gnu.hash section if necessary.
(struct collect_gnu_hash_codes): New member.
(elf_gnu_hash_process_symidx): New function name.
(elf_renumber_gnu_hash_syms): Ignore local and undefined
symbols. Record xlat location for every symbol which should have
a .MIPS.xhash entry.
(bfd_elf_size_dynamic_sections): Add DT_GNU_HASH dynamic tag to
dynamic section if necessary.
(GNU_HASH_SECTION_NAME): New define.
(bfd_elf_size_dynsym_hash_dynstr): Get .MIPS.xhash section.
Update the section size info.
* elfxx-mips.c (struct mips_elf_hash_sort_data): New members.
(struct mips_elf_link_hash_entry): New member.
(mips_elf_link_hash_newfunc): Initialize .MIPS.xhash translation
table location.
(mips_elf_sort_hash_table): Initialize the pointer to the
.MIPS.xhash section.
(mips_elf_sort_hash_table_f): Populate the .MIPS.xhash
translation table entry with the symbol dynindx.
(_bfd_mips_elf_section_from_shdr): Add SHT_MIPS_XHASH.
(_bfd_mips_elf_fake_sections): Initialize .MIPS.xhash section
info.
(_bfd_mips_elf_create_dynamic_sections): Create .MIPS.xhash
section.
(_bfd_mips_elf_size_dynamic_sections): Add DT_MIPS_XHASH tag to
dynamic section.
(_bfd_mips_elf_finish_synamic_sections): Add DT_MIPS_XHASH.
(_bfd_mips_elf_final_write_processing): Set .MIPS.xhash section
sh_link info.
(_bfd_mips_elf_get_target_dtag): Get DT_MIPS_XHASH tag.
(MIPS_LIBC_ABI_XHASH): New ABI version enum value.
(_bfd_mips_post_process_headers): Mark the ABI version as
MIPS_LIBC_ABI_XHASH if there exists a .MIPS.xhash section,
but not a .hash section.
(_bfd_mips_elf_record_xhash_symbol): New function. Record a
position in the translation table, associated with the hash
entry.
* elfxx-mips.h (literal_reloc_p): Define
elf_backend_record_xhash_symbol backend hook.
* elfxx-target.h: Initialize elf_backend_record_xhash_symbol
backend hook.
include * elf/mips.h (SHT_GNU_XHASH): New define.
(DT_GNU_XHASH): New define.
binutils * readelf.c (get_mips_dynamic_type): Return MIPS_XHASH dynamic type.
(get_mips_section_type_name): Return MI{S_XHASH name string.
(dynamic_section_mips_val): Initialize the .MIPS.xhash dynamic
info.
(process_symbol_table): Initialize the .MIPS.xhash section
pointer. Adjust the readelf output to support the new section.
(process_object): Set the .MIPS.xhash dynamic info to zero.
This patch makes the elf64bpf emulation to use it's own linker script,
based on elf.sc. At the moment, the only change is that the BPF
executable doesn't define an entry symbol (BPF programs feature
several entry points scattered in several sections.)
This is a step towards the goal of generating proper ELF executables
that would be loaded by the kernel's libbpf. We are not there yet:
BPF "programs" should still be linked with -r.
This change removes a warning while linking executables, decreases the
number of unsupported tests in the target from 47 to 29, and increases
the number of expected passes from 104 to 145.
Regtested in x86_64 for all targets.
No regressions.
ld/ChangeLog:
2019-08-07 Jose E. Marchesi <jose.marchesi@oracle.com>
* scripttempl/elf64bpf.sc: Adapted from elf.sc.
* emulparams/elf64bpf.sh (SCRIPT_NAME): Use elf64bpf.
(EMBEDDED): Define.
* testsuite/ld-bpf/call-1.d: Do not expect a warning regarding an
undefined entry symbol.
* testsuite/ld-bpf/jump-1.d: Likewise.
* testsuite/ld-undefined/undefined.exp: Do not pass '-e entry' to
ld in BPF targets, and do not expect line number information.
* testsuite/ld-srec/srec.exp (run_srec_test): xfail s-record tests
in BPF targets.
Revert
commit 8c728a9d93
Author: Martin Liska <mliska@suse.cz>
Date: Mon Jul 22 14:23:32 2019 +0200
Remove tests that test __gnu_lto_v1 symbol.
since outputs of these tests are used by later tests. Check the normal
symbol, foo, instead of __gnu_lto_v.*, which GCC stopped emitting after
r273662.
* testsuite/ld-plugin/lto-3r.d: Restored. Check foo instead
of __gnu_lto_v.*.
* testsuite/ld-plugin/lto-5r.d: Likewise.
* testsuite/ld-plugin/lto.exp: Run lto-3r and lto-5r tests.
Add linker relaxation. The first relaxation added is converting
GOTPC32 to PCREL relocations. This relaxation doesn't change the size of
the binary.
bfd/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* elf32-arc.c (bfd_get_32_me): New function.
(bfd_put_32_me): Likewise.
(arc_elf_relax_section): Likewise.
(bfd_elf32_bfd_relax_section): Define.
ld/testsuite/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* ld-arc/relax-local-pic.d: New test.
* ld-arc/relax-local-pic.s: New file.
ld/ChangeLog:
2019-07-22 Martin Liska <mliska@suse.cz>
* testsuite/ld-plugin/lto-3r.d: Remove.
* testsuite/ld-plugin/lto-5r.d: Remove.
* testsuite/ld-plugin/lto.exp: Do not run lto-3r and lto-5r
tests.
Also restore them somewhat closer to the original. They originally
failed on many targets, and a month later I "simplified" them as part
of a larger patch fixing other failing tests. That unfortunately lost
their main purpose, which was to test TLS layout.
* testsuite/ld-elf/size-1.d,
* testsuite/ld-elf/size-1.s,
* testsuite/ld-elf/size-1.t: New test.
* testsuite/ld-elf/size-2.d,
* testsuite/ld-elf/size-2.s,
* testsuite/ld-elf/size-2.t: New test.
* testsuite/ld-scripts/size-1.d,
* testsuite/ld-scripts/size-1.s,
* testsuite/ld-scripts/size-1.t,
* testsuite/ld-scripts/size-2.s,
* testsuite/ld-scripts/size-2.d,
* testsuite/ld-scripts/size-2.t,
* testsuite/ld-scripts/size.exp: Delete.
This patch supports using pcrel instructions in TLS code sequences. A
number of new relocations are needed, gas operand modifiers to
generate those relocations, and new TLS optimisation. For
optimisation it turns out that the new pcrel GD and LD sequences can
be distinguished from the non-pcrel GD and LD sequences by there being
different relocations on the new sequence. The final "add ra,rb,13"
on IE sequences similarly needs a new relocation, or as I chose, a
modification of R_PPC64_TLS. On pcrel IE code, the R_PPC64_TLS points
one byte into the "add" instruction rather than being on the
instruction boundary.
GD:
pla 3,z@got@tlsgd@pcrel # R_PPC64_GOT_TLSGD34
bl __tls_get_addr@notoc(z@tlsgd) # R_PPC64_TLSGD and R_PPC64_REL24_NOTOC
edited to IE
pld 3,z@got@tprel@pcrel
add 3,3,13
edited to LE
paddi 3,13,z@tprel
nop
LD:
pla 3,z@got@tlsld@pcrel # R_PPC64_GOT_TLSLD34
bl __tls_get_addr@notoc(z@tlsld) # R_PPC64_TLSLD and R_PPC64_REL24_NOTOC
..
paddi 9,3,z2@dtprel
pld 10,z3@got@dtprel@pcrel
add 10,10,3
edited to LE
paddi 3,13,0x1000
nop
IE:
pld 9,z@got@tprel@pcrel # R_PPC64_GOT_TPREL34
add 3,9,z@tls@pcrel # R_PPC64_TLS at insn+1
ldx 4,9,z@tls@pcrel
lwax 5,9,z@tls@pcrel
stdx 5,9,z@tls@pcrel
edited to LE
paddi 9,13,z@tprel
nop
ld 4,0(9)
lwa 5,0(9)
std 5,0(9)
LE:
paddi 10,13,z@tprel
include/
* elf/ppc64.h (R_PPC64_TPREL34, R_PPC64_DTPREL34),
(R_PPC64_GOT_TLSGD34, R_PPC64_GOT_TLSLD34),
(R_PPC64_GOT_TPREL34, R_PPC64_GOT_DTPREL34): Define.
(IS_PPC64_TLS_RELOC): Include new tls relocs.
bfd/
* reloc.c (BFD_RELOC_PPC64_TPREL34, BFD_RELOC_PPC64_DTPREL34),
(BFD_RELOC_PPC64_GOT_TLSGD34, BFD_RELOC_PPC64_GOT_TLSLD34),
(BFD_RELOC_PPC64_GOT_TPREL34, BFD_RELOC_PPC64_GOT_DTPREL34),
(BFD_RELOC_PPC64_TLS_PCREL): New pcrel tls relocs.
* elf64-ppc.c (ppc64_elf_howto_raw): Add howtos for pcrel tls relocs.
(ppc64_elf_reloc_type_lookup): Translate pcrel tls relocs.
(must_be_dyn_reloc, dec_dynrel_count): Add R_PPC64_TPREL64.
(ppc64_elf_check_relocs): Support pcrel tls relocs.
(ppc64_elf_tls_optimize, ppc64_elf_relocate_section): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Map "tls@pcrel", "got@tlsgd@pcrel",
"got@tlsld@pcrel", "got@tprel@pcrel", and "got@dtprel@pcrel".
(fixup_size, md_assemble): Handle pcrel tls relocs.
(ppc_force_relocation, ppc_fix_adjustable): Likewise.
(md_apply_fix, tc_gen_reloc): Likewise.
ld/
* testsuite/ld-powerpc/tlsgd.d,
* testsuite/ld-powerpc/tlsgd.s,
* testsuite/ld-powerpc/tlsie.d,
* testsuite/ld-powerpc/tlsie.s,
* testsuite/ld-powerpc/tlsld.d,
* testsuite/ld-powerpc/tlsld.s: New tests.
* testsuite/ld-powerpc/powerpc.exp: Run them.
Just making room for a new tlsld test.
* testsuite/ld-powerpc/tlsldopt.d: Rename from tlsld.d.
* testsuite/ld-powerpc/tlsldopt.s: Rename from tlsld.s.
* testsuite/ld-powerpc/tlsldopt32.d: Rename from tlsld32.d.
* testsuite/ld-powerpc/tlsldopt32.s: Rename from tlsld32.s.
* testsuite/ld-powerpc/powerpc.exp: Update.
When doing a relocatable link, members of input section group are
placed in their own output sections. We need to make sure that no
input sections are merged with member of output section group.
PR ld/24819
* emultempl/elf32.em (elf_orphan_compatible): Return FALSE for
member of output section group when doing a relocatable link.
* testsuite/ld-elf/pr24819.d: New file.
* testsuite/ld-elf/pr24819.s: Likewise.
It is possible to create shared libraries on PowerPC using
-ftls-model=inital-exec or -ftls-model=local-exec. The first is half
reasonable, getting you a shared library that can't be dlopen'd but
otherwise is reasonable. The second is quite bad. Not only do you
lose being able to dlopen, the library also has dynamic text
relocations. Worse, the TPREL16_LO, TPREL16_HA and other TPREL16
dynamic relocs emitted were wrong, resulting in wrong values being
applied by ld.so.
Using the first TLS section symbol in dynamic relocations for local
TLS symbols doesn't work. It's wrong because TLS symbols used by TLS
relocs have values relative to the TLS segment, whereas the TLS
section symbols are addresses. This patch instead uses a symbol index
of zero which is used elsewhere by PowerPC on dynamic TLS relocs.
It's not strictly ABI compliant to use a non-TLS symbol with TLS
relocs but symbol index zero can be interpreted as "no symbol". Not
using the first TLS section symbol means it doesn't need to be dynamic.
The patch also fixes a further problem with PowerPC32 dynamic TPREL16*
relocs, which shouldn't have the symbol value in the addend as we do
for non-TLS symbols.
bfd/
* elflink.c (_bfd_elf_omit_section_dynsym_default): Don't keep
tls_sec.
(_bfd_elf_init_1_index_section): Prefer not using TLS sections.
(_bfd_elf_init_2_index_sections): Likewise.
* elf64-ppc.c (ppc64_elf_relocate_section): When emitting dynamic
relocations for local TLS symbols, use STN_UNDEF as the relocation
symbol.
* elf32-ppc.c (ppc_elf_relocate_section): Likewise, and don't
leave TLS symbol value in the addend.
ld/
* testsuite/ld-powerpc/tlsso.r: Update.
* testsuite/ld-powerpc/tlsso32.g: Update.
* testsuite/ld-powerpc/tlsso32.r: Update.
* testsuite/ld-powerpc/tlstocso.r: Update.
* testsuite/ld-cris/tls-dso-dtpoffd2.d: Update.
* testsuite/ld-cris/tls-dso-dtpoffd4.d: Update.
* testsuite/ld-cris/tls-dso-tpoffgotcomm1.d: Update.
* testsuite/ld-cris/tls-gd-1.d: Update.
* testsuite/ld-cris/tls-gd-1h.d: Update.
* testsuite/ld-cris/tls-gd-2.d: Update.
* testsuite/ld-cris/tls-gd-2h.d: Update.
* testsuite/ld-cris/tls-ie-10.d: Update.
* testsuite/ld-cris/tls-ie-11.d: Update.
* testsuite/ld-cris/tls-ie-8.d: Update.
* testsuite/ld-cris/tls-ie-9.d: Update.
* testsuite/ld-cris/tls-js1.d: Update.
* testsuite/ld-cris/tls-ld-4.d: Update.
* testsuite/ld-cris/tls-ld-5.d: Update.
* testsuite/ld-cris/tls-ld-6.d: Update.
* testsuite/ld-cris/tls-ld-7.d: Update.
* testsuite/ld-cris/tls-ldgd-14.d: Update.
* testsuite/ld-cris/tls-ldgd-15.d: Update.
* testsuite/ld-cris/tls-ldgdx-14.d: Update.
* testsuite/ld-cris/tls-ldgdx-15.d: Update.
* testsuite/ld-cris/tls-local-54.d: Update.
* testsuite/ld-cris/tls-local-60.d: Update.
* testsuite/ld-cris/tls-local-61.d: Update.
* testsuite/ld-cris/tls-local-63.d: Update.
* testsuite/ld-cris/tls-local-64.d: Update.
* testsuite/ld-cris/tls-ok-30.d: Update.
* testsuite/ld-cris/tls-ok-32.d: Update.
* testsuite/ld-cris/tls-ok-34.d: Update.
* testsuite/ld-mips-elf/tls-multi-got-1.got: Update.
* testsuite/ld-mips-elf/tls-multi-got-1.r: Update.
* testsuite/ld-mips-elf/tlsdyn-pie-o32.d: Update.
* testsuite/ld-mips-elf/tlsdyn-pie-o32.got: Update.
* testsuite/ld-mips-elf/tlslib-o32-hidden.got: Update.
* testsuite/ld-mips-elf/tlslib-o32-ver.got: Update.
* testsuite/ld-mips-elf/tlslib-o32.got: Update.
* testsuite/ld-s390/tlspic.rd: Update.
* testsuite/ld-s390/tlspic_64.rd: Update.
* testsuite/ld-sparc/tlssunnopic32.rd: Update.
* testsuite/ld-sparc/tlssunnopic64.rd: Update.
* testsuite/ld-sparc/tlssunpic32.rd: Update.
* testsuite/ld-sparc/tlssunpic64.rd: Update.
Recently a patch was submitted for a Xen Project test harness binary to
override the compiler specified @object to @func (see [1]). In a reply I
suggested we shouldn't make ourselves dependent on currently unspecified
behavior of gas here: It accumulates all requests, and then
bfd/elf.c:swap_out_syms(), in an apparently ad hoc manner, prioritizes
certain flags over others.
Make the behavior predictable: Generally the last .type is what counts.
Exceptions are directives which set multiple bits (TLS, IFUNC, and
UNIQUE): Subsequent directives requesting just the more generic bit
(i.e. FUNC following IFUNC) won't clear the more specific one. Warn
about incompatible changes, except from/to STT_NOTYPE.
Also add a new target hook, which hppa wants to use right away afaict.
In the course of adding the warning I ran into two ld testsuite
failures. I can only assume that it was a copy-and-paste mistake that
lead to the same symbol having its type set twice.
[1] https://lists.xenproject.org/archives/html/xen-devel/2019-05/msg01980.html
Consider a file containing only Armv8-M secure entry functions.
This file is compiled and linked with "-march=armv8-m.main -mfloat-abi=hard
-mfpu=fpv5-sp-d16 -mcmse -static --specs=rdimon.specs
-Wl,--section-start,.gnu.sgstubs=0x190000 -ffunction-sections
-fdata-sections
-Wl,--gc-sections -g" options to generate an executable.
The executable generated does not contain any debug information of these
secure entry functions even though it contains secure entry functions in
the .text section. This patch fixes this problem.
PR 23839
bfd * elf32-arm.c (elf32_arm_update_relocs): Do not include the
section VMA in the offset used to update exidx relocs.
ld * testsuite/ld-arm/unwind-4.d: Adjust for corrected calculation of
exidx relocs.
commit d2ef37ebd9
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Dec 7 08:30:30 2018 -0800
elf: Report property change when merging properties
failed to remove the property after reporting it has been removed. This
patch corrects it.
bfd/
PR ld/24721
* elf-properties.c (elf_merge_gnu_property_list): Remove the
property after reporting property removal.
ld/
PR ld/24721
* testsuite/ld-x86-64/x86-64.exp: Run PR ld/24721 tests.
* testsuite/ld-x86-64/pr24721-x32.d: New file.
* testsuite/ld-x86-64/pr24721.d: Likewise.
* testsuite/ld-x86-64/pr24721.map: Likewise.
* testsuite/ld-x86-64/pr24721a.s: Likewise.
* testsuite/ld-x86-64/pr24721b.s: Likewise.
While the skiboot linker script bears some culpability in this PR,
it's also true that the GOT indirect to GOT relative optimisation for
16-bit offsets isn't safe. At least, it isn't safe to remove the GOT
entry based on distance between the GOT pointer and symbol calculated
from the preliminary layout. So this patch removes that optimisation,
and reduces the range allowed for 32-bit and 34-bit offsets.
PR 24704
bfd/
* elf64-ppc.c (R_PPC64_GOT16_DS): Don't set has_gotrel.
(ppc64_elf_edit_toc): Don't remove R_PPC64_GOT16_DS got entries.
Reduce range of offsets allowed for other GOT relocs.
ld/
* testsuite/ld-powerpc/elfv2exe.d: Update.
* testsuite/ld-powerpc/elfv2so.d: Update.
These ilp32 relocations were missing for some reason.
bfd/ChangeLog:
* elfnn-aarch64.c: Enable MOVW_PREL relocs for ELF32.
include/ChangeLog:
* elf/aarch64.h (R_AARCH64_P32_MOVW_PREL_G0): Define.
(R_AARCH64_P32_MOVW_PREL_G0_NC): Define.
(R_AARCH64_P32_MOVW_PREL_G1): Define.
ld/ChangeLog:
* testsuite/ld-aarch64/aarch64-elf.exp: Add emit-relocs-22 and -23.
* testsuite/ld-aarch64/emit-relocs-22.d: New test.
* testsuite/ld-aarch64/emit-relocs-22.s: New test.
* testsuite/ld-aarch64/emit-relocs-23.d: New test.
* testsuite/ld-aarch64/emit-relocs-23.s: New test.
If the new GNU property section was being created by the linker
(this will happen only if none of the inputs have any GNU property
section but the command line to the linker forces a bti with
--force-bti), the alignment of the section and hence the program
header of PT_GNU_PROPERTY type was not being set correctly. This
patch fixes this issue.
bfd/ChangeLog:
2019-06-06 Sudakshina Das <sudi.das@arm.com>
* elfxx-aarch64.c (_bfd_aarch64_elf_link_setup_gnu_properties): Set
alignment of the new gnu property section.
ld/ChangeLog:
2019-06-06 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-aarch64/aarch64-elf.exp: Add new tests.
* testsuite/ld-aarch64/property-bti-pac4-a.d: New test.
* testsuite/ld-aarch64/property-bti-pac4-b.d: New test.
* testsuite/ld-aarch64/property-bti-pac4.s: New test.
This changes s12z to use generic.em and genelf.em, which is more
suited to targets that use the generic linker hash table. A tweak or
two to some testsuite predicates then gives a clean testsuite result
on the target.
PR 24596
binutils/
* testsuite/lib/binutils-common.exp (supports_gnu_unique): Add
s12z to targets not supporting this feature.
ld/
* emulparams/m9s12zelf.sh (TEMPLATE_NAME): Set to generic.
(EXTRA_EM_FILE): Define to genelf.
* testsuite/lib/ld-lib.exp (uses_genelf): Add s12z.
Overflow checks were removed for all hi16 relocations except PC-relative
high relocations per PR ld/16720. Remove overflow checks from %pcrel_hi
relocations so that we can correctly handle negative offsets from PC.
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation) <R_MIPS_PCHI16>:
Remove overflow check.
ld/
* testsuite/ld-mips-elf/undefweak-overflow.s: Remove test case
for pcrel_hi/pcrel_lo.
* testsuite/ld-mips-elf/undefweak-overflow.d: Update to match.
* testsuite/ld-mips-elf/reloc-pcrel-r6.s: New test source.
* testsuite/ld-mips-elf/reloc-pcrel-r6.d: New test linker script.
* testsuite/ld-mips-elf/reloc-pcrel-r6.ld: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
Force sysv hash style for reliable symbol table layout.
ld/ChangeLog:
* testsuite/ld-aarch64/variant_pcs-now.d: Use --hash-style=sysv.
* testsuite/ld-aarch64/variant_pcs-shared.d: Likewise.
Propagate STO_AARCH64_VARIANT_PCS st_other attribute to the output and
add DT_AARCH64_VARIANT_PCS dynamic tag if necessary.
Mismatching attributes are not diagnosed.
bfd/ChangeLog:
* elfnn-aarch64.c (elfNN_aarch64_merge_symbol_attribute): New function.
(struct elf_aarch64_link_hash_table): Add variant_pcs member.
(elfNN_aarch64_allocate_dynrelocs): Update variant_pcs.
(elfNN_aarch64_size_dynamic_sections): Add DT_AARCH64_VARIANT_PCS.
(elf_backend_merge_symbol_attribute): Define.
ld/ChangeLog:
* testsuite/ld-aarch64/aarch64-elf.exp: Add new tests.
* testsuite/ld-aarch64/variant_pcs-1.s: New asm for tests.
* testsuite/ld-aarch64/variant_pcs-2.s: New asm for tests.
* testsuite/ld-aarch64/variant_pcs-now.d: New test.
* testsuite/ld-aarch64/variant_pcs-r.d: New test.
* testsuite/ld-aarch64/variant_pcs-shared.d: New test.
* testsuite/ld-aarch64/variant_pcs.ld: New linker script for tests.
bfd/
* elf64-ppc.c (ppc64_elf_check_relocs): Set has_gotrel for
R_PPC64_GOT_PCREL34.
(xlate_pcrel_opt): New function.
(ppc64_elf_edit_toc): Handle R_PPC64_GOT_PCREL34.
(ppc64_elf_relocate_section): Edit GOT indirect to GOT relative
for R_PPC64_GOT_PCREL34. Implement R_PPC64_PCREL_OPT optimisation.
ld/
* testsuite/ld-powerpc/pcrelopt.s,
* testsuite/ld-powerpc/pcrelopt.d,
* testsuite/ld-powerpc/pcrelopt.sec: New test.
* testsuite/ld-powerpc/powerpc.exp: Run it.
This patch adds support to the linker for the Linux eBPF architecture.
A minimal testsuite is included.
ld/ChangeLog:
2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
* Makefile.am (ALL_64_EMULATION_SOURCES): Add eelf64bpf.c.
* Makefile.in (prefix): Regenerate.
* configure.tgt (targ_extra_ofiles): Add case for bpf-*-* targets.
* emulparams/elf64bpf.sh: New file.
* testsuite/lib/ld-lib.exp (check_gc_sections_available): Add
bpf-*-* to the list of targets not supporting gc-sections.
* testsuite/ld-bpf/bar.s: New file.
* testsuite/ld-bpf/jump-1.d: Likewise.
* testsuite/ld-bpf/foo.s: Likewise.
* testsuite/ld-bpf/call-1.d: Likewise.
* testsuite/ld-bpf/bpf.exp: Likewise.
* testsuite/ld-bpf/baz.s: Likewise.
