Commit 23283c1b changed the layout of some bss style sections on
powerpc64, but neglected to add a page gap before the third PT_LOAD
segment created by this reording. Without a page gap we get two
PT_LOAD headers that overlap by one page in memory. That shouldn't be
allowed because the dynamic loader will load garbage from the first
page of the last segment over the last page of the previous segment.
bfd/
* elf.c (_bfd_elf_map_sections_to_segments): Do not make a new
segment for loaded sections after nonloaded sections if the
sections are on the same page.
ld/testsuite/
* ld-powerpc/elfv2so.d: Update
This should fix some build errors seen on AIX, MinGW, and possibly other
non-GNU systems too due to missing asprintf().
bfd/
* configure.in: Add asprintf and vasprintf to AC_CHECK_DECLS.
* config.in, configure: Regenerate.
Emit *GLOB_DAT instead of *RELATIVE relocs for protected data
in shared objects.
This is needed for the fix of glibc bug 17711:
https://sourceware.org/bugzilla/show_bug.cgi?id=17711
bfd:
PR ld/18705
* elfnn-aarch64.c (elf_backend_extern_protected_data): Define.
ld/testsuite:
PR ld/18705
* ld-aarch64/protected-data.d: New.
* ld-aarch64/protected-data.s: New.
* ld-aarch64/aarch64-elf.exp: Add new test.
Emit *GLOB_DAT instead of *RELATIVE relocs for protected data
in shared objects.
This is needed for the fix of glibc bug 17711:
https://sourceware.org/bugzilla/show_bug.cgi?id=17711
bfd:
PR ld/18705
* elf32-arm.c (elf_backend_extern_protected_data): Define.
ld/testsuite:
PR ld/18705
* ld-arm/protected-data.d: New.
* ld-arm/protected-data.s: New.
* ld-arm/arm-elf.exp: Add new test.
For selected targets. The testcase reveals a number of targets that
still need fixing.
bfd/
* elf32-arm.c (elf32_arm_final_link_relocate): Use SYMBOLIC_BIND to
check if a symbol should be bound symbolically.
* elf32-hppa.c (elf32_hppa_check_relocs,
elf32_hppa_adjust_dynamic_symbol, elf32_hppa_relocate_section,
elf32_hppa_finish_dynamic_symbol): Likewise.
* elf32-m68k.c (elf_m68k_check_relocs,
elf_m68k_relocate_section): Likewise.
* elf32-nios2.c (nios2_elf32_relocate_section,
nios2_elf32_check_relocs, allocate_dynrelocs): Likewise.
* elf32-tic6x.c (elf32_tic6x_finish_dynamic_symbol,
elf32_tic6x_relocate_section): Likewise.
ld/testsuite/
* ld-elf/symbolic-func.s,
* ld-elf/symbolic-func.r: New test.
* ld-elf/elf.exp: Run it.
* elf.c (_bfd_elf_assign_file_positions_for_non_load): Use .rela
prefix for reloc section corresponding to rela section associated
with renamed debug section.
This function stops too soon, as I found when the hash chain happened
to contain two .debug_macro sections and a .bss section:
.debug_macro -> .bss -> .debug_macro
* section.c (bfd_get_section_by_name_if): Iterate over entire hash
chain.
For the case of MIPS n64 target and 32-bit host, the computation of
the DT_MIPS_RLD_MAP_REL tag involves sdyn->output_section->vma +
sdyn->output_offset (64-bit) being added to b (32-bit host pointer),
so losing the high part and resulting in an incorrect
DT_MIPS_RLD_MAP_REL tag, and all dynamically linked glibc tests
failing for n64. This patch fixes this (spot-tested with glibc tests;
however, I don't have a self-contained testcase for this bug).
* elfxx-mips.c (_bfd_mips_elf_finish_dynamic_sections)
<DT_MIPS_RLD_MAP_REL>: Add target address to host address
difference, not to host pointer.
Bogus assembly can hit an assertion in opd_entry_value when the symbol
referenced by a function descriptor is undefined. Worse, the code
after the assert copies unitialised memory to return the code section.
This uninitialised pointer can later be dereferencd, possibly causing
a linker segmentation fault.
* elf64-ppc.c (opd_entry_value): Remove assertion. Instead,
return -1 if symbol referenced is not defined. Tidy.
The output SHF_COMPRESSED section size is different from input if
ELF classes of input and output aren't the same. We must adjust
the section sizes as well as the compression headers in
SHF_COMPRESSED sections when converting objects between different
ELF classes.
bfd/
PR binutils/18656
* bfd.c (bfd_convert_section_size): New function.
(bfd_convert_section_contents): Likewise.
* bfd-in2.h: Regenerated.
binutils/
2015-07-10 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/18656
* objcopy.c (setup_section): Call bfd_convert_section_size
to get the output section size.
(copy_section): Get the section size from the output section
and call bfd_get_full_section_contents to convert section
contents for output.
binutils/testsuite/
PR binutils/18656
* binutils-all/compress.exp (convert_test): New proc.
Run conversion tests between x86-64 and x32.
When generating relocation (tc_gen_reloc) 32 bit relocation fixup
is changed to new 32 bit PC relative relocation if the fixup has pc-relative
flag set.
bfd/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* elf32-avr.c: Add 32 bit PC relative relocation for AVR target.
gas/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* config/tc-avr.c (tc_gen_reloc): Change 32 bit relocation to
32 bit PC relative and update offset if the fixup is pc-relative.
* config/tc-avr.h (DIFF_EXPR_OK): Define to enable PC relative diff
relocs.
gas/testsuite/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* gas/avr/pc-relative-reloc.d: New test for 32 bit pc relative reloc.
* gas/avr/per-function-debugline.s: New test source.
include/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* elf/avr.h: Add new 32 bit PC relative relocation.
ld/testsuite/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* ld-avr/gc-section-debugline.d: New test.
* ld-avr/per-function-debugline.s: Source for new test.
bfd/
* elf64-ppc.c (toc_adjusting_stub_needed): Use the symbol value
plus addend rather than the original st_value when looking up
entries in opd->adjust.
ld/testsuite/
* ld-powerpc/tocopt6-inc.s, ld-powerpc/tocopt6a.s,
ld-powerpc/tocopt6b.s, ld-powerpc/tocopt6c.s,
ld-powerpc/tocopt6.d: New test.
* ld-powerpc/powerpc.exp (ppc64elftests): Add it.
_bfd_elf_assign_file_positions_for_non_load will set the sh_size
field for .shstrtab section. There is need to initialize it in
_bfd_elf_compute_section_file_positions.
* elf.c (_bfd_elf_compute_section_file_positions): Don't
initialize sh_size for .shstrtab here.
This patch uses ELF strtab with GC and suffix merging support to create
ELF .strtab section. There is some small memory overhead to use ELF
strtab:
==14928== HEAP SUMMARY:
==14928== in use at exit: 3,276,318 bytes in 679 blocks
==14928== total heap usage: 1,544 allocs, 865 frees, 15,259,146 bytes allocated
vs.
==14936== HEAP SUMMARY:
==14936== in use at exit: 3,276,318 bytes in 679 blocks
==14936== total heap usage: 1,532 allocs, 853 frees, 15,026,402 bytes allocated
when running:
./ld-new -m elf_x86_64 -o tmpdir/ld-partial.o -r ldgram.o ldlex-wrapper.o lexsup.o ldlang.o mri.o ldctor.o ldmain.o plugin.o ldwrite.o ldexp.o ldemul.o ldver.o ldmisc.o ldfile.o ldcref.o eelf_x86_64.o eelf32_x86_64.o eelf_i386.o eelf_iamcu.o ei386linux.o eelf_l1om.o eelf_k1om.o ldbuildid.o
The results are
[32] .strtab STRTAB 0+ 3beff8 00407a 00 0 0 1
vs
[32] .strtab STRTAB 0+ 3beff8 0041d8 00 0 0 1
It reduces the .strtab size by 350 bytes, about 2%
Saving on libc.so from glibc is much more since libc.so has many alias
symbols with the same suffix. For x32 glibc,
[82] .strtab STRTAB 0+ 81b348 0159e7 00 0 0 1
vs
[82] .strtab STRTAB 0+ 81b8bc 019e72 00 0 0 1
It reduces the .strtab size by 17547 bytes, about 16%.
bfd/
PR gas/18451
* elf-bfd.h (elf_sym_strtab): New.
(elf_link_hash_table): Add strtabcount, strtabsize and
strtab.
(_bfd_elf_stringtab_init): Removed.
* elf.c (_bfd_elf_stringtab_init): Removed.
(_bfd_elf_compute_section_file_positions): Replace
bfd_strtab_hash/_bfd_elf_stringtab_init/_bfd_stringtab_free/
_bfd_stringtab_size with
elf_strtab_hash/_bfd_elf_strtab_init/_bfd_elf_strtab_free/
_bfd_elf_strtab_size. Use _bfd_elf_strtab_add,
_bfd_elf_strtab_finalize and _bfd_elf_strtab_offset to get
st_name.
(swap_out_syms): Likewise.
* elflink.c (elf_final_link_info): Replace bfd_strtab_hash
with elf_strtab_hash. Remove symbuf, symbuf_count,
symbuf_size and shndxbuf_size.
(elf_link_flush_output_syms): Removed.
(elf_link_output_sym): Renamed to ...
(elf_link_output_symstrtab): This. Replace _bfd_stringtab_add
with _bfd_elf_strtab_add. Don't flush symbols to the file nor
swap out symbols.
(elf_link_swap_symbols_out): New.
(elf_link_output_extsym): Replace elf_link_output_sym with
elf_link_output_symstrtab.
(elf_link_input_bfd): Likewise.
(elf_final_link_free): Replace _bfd_stringtab_free with
_bfd_elf_strtab_free. Remove symbuf.
(bfd_elf_final_link): Replace _bfd_elf_stringtab_init with
_bfd_elf_strtab_init. Don't set symbuf, symbuf_count,
symbuf_size nor shndxbuf_size. Initialize strtabsize and
strtab. Initialize symshndxbuf to -1 when number of sections
>= 64K. Replace elf_link_output_sym/elf_link_output_sym with
elf_link_output_symstrtab/elf_link_output_symstrtab. Don't
call elf_link_flush_output_syms. Call _bfd_elf_strtab_finalize
and elf_link_swap_symbols_out. Replace _bfd_stringtab_size
and _bfd_stringtab_emit with _bfd_elf_strtab_size and
_bfd_elf_strtab_emit.
gas/testsuite/
PR gas/18451
* gas/elf/elf.exp: Run strtab.
* gas/elf/strtab.d: New file.
* gas/elf/strtab.s: Likewise.
ld/testsuite/
PR gas/18451
* ld-elf/strtab.d: New file.
* ld-elf/strtab.s: Likewise.
Since the .plt section and DT_PLTGOT are used by prelink to undo
prelinking for dynamic relocations, we must keep them even if there is
no PLT relocation. This patch reverted commit a3747075a.
bfd/
* elf32-i386.c (elf_i386_allocate_dynrelocs): Always allocate
space for the first .plt entry.
(elf_i386_size_dynamic_sections): Always add DT_PLTGOT for .plt
section. Add DT_PLTRELSZ, DT_PLTREL and DT_JMPREL only if
there are PLT relocations.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Always
allocate space for the first .plt entry.
(elf_x86_64_size_dynamic_sections): Always add DT_PLTGOT for
.plt section. Add DT_PLTRELSZ, DT_PLTREL and DT_JMPREL only if
there are PLT relocations.
ld/testsuite/
* ld-i386/i386.exp: Run pltgot-2 for Linux targets.
* ld-x86-64/x86-64.exp: Likewise.
* ld-i386/pltgot-1.d: Updated.
* ld-x86-64/pltgot-1.d: Likewise.
* ld-i386/pltgot-2.d: New file.
* ld-x86-64/pltgot-2.d: Likewise.
When converting "mov foo@GOTPCREL(%rip), %reg" to "lea foo(%rip), %reg"
with R_X86_64_PC32 relocation, it may overflow if the target section
is more than 2GB away. This patch estimates distance between mov
instruction and the target section. We convert R_X86_64_GOTPCREL to
R_X86_64_PC32 only if their distance is less than 2GB.
PR ld/18591
* elf64-x86-64.c (elf_x86_64_convert_mov_to_lea): Don't convert
R_X86_64_GOTPCREL to R_X86_64_PC32 if it will cause relocation
overflow.
2015-06-23 Jiong Wang <jiong.wang@arm.com>
bfd/
* elfnn-aarch64.c (aarch64_readonly_dynrelocs): New function.
(elfNN_aarch64_size_dynamic_sections): Traverse hash table to check
relocations against read-only sections.
ld/testsuite/
* ld-aarch64/dt_textrel.s: New testcase.
* ld-aarch64/dt_textrel.d: New expectation file.
* ld-aarch64/aarch64-elf.exp: Run new testcase.
PR gas/18481
bfd * elf32-arm.c (R_ARM_TLS_LE32): Set the special function to NULL.
gas * config/tc-arm.c (tc_gen_reloc): Include BFD_RELOC_ARM_TLS_LE32
in the same case as BFD_RELOC_ARM_TLS_IS32.
tests * gas/arm/tls.s: Add tests of the tpoff pseudo with a local
symbol.
* gas/arm/tls.d: Update expected output.
This promotes BFD's struct elf_build_id to the generic struct bfd_build_id,
populated when an ELF or PE BFD is read.
gdb is updated to use that, and to use the build-id to find symbols for PE files
also.
There is currently no generic way to extract the build-id from an object file,
perhaps an option to objdump to do this might make sense?
On x86_64-pc-cygwin, gdb's sepdebug.exp changes:
-# of unsupported tests 1
+# of expected passes 90
I don't seem to get consistent testsuite runs on i686-linux-gnu, but there
don't appear to be any regressions.
bfd/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* elf-bfd.h : Remove struct elf_build_id.
* bfd.c : Add struct bfd_build_id.
* bfd-in2.h: Regenerate.
* elf.c (elfobj_grok_gnu_build_id): Update to use bfd_build_id.
* libpei.h: Add protoype and macros for
bfd_XXi_slurp_codeview_record.
* peXXigen.c (_bfd_XXi_slurp_codeview_record): Make public
* peicode.h (pe_bfd_read_buildid): Add.
(pe_bfd_object_p): Use pe_bfd_read_buildid().
gdb/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* build-id.c: Don't include elf-bfd.h.
(build_id_bfd_get): Use bfd_build_id.
(build_id_verify): Ditto.
* build-id.h: Ditto.
(find_separate_debug_file_by_buildid): Ditto.
* python/py-objfile.c: Don't include elf-bfd.h.
(objfpy_get_build_id) Use bfd_build_id.
(objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
* coffread.c: Include build-id.h.
(coff_symfile_read): Try find_separate_debug_file_by_buildid.
gdb/doc/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* gdb.texinfo (Separate Debug Files): Document that PE is also
supported.
gdb/testsuite/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* gdb.base/sepdebug.exp: Add EXEEXT where needed.
* lib/gdb.exp (get_build_id): Teach how to extract build-id from a
PE file.
* lib/future.exp (gdb_find_objdump): Add gdb_find_objdump.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
* cofflink.c (_bfd_coff_generic_relocate_section): Revert
2014-03-26 change. Call _bfd_clear_contents for relocs against
local and global symbols defined in discarded input sections.
* elf32-msp430.c (rl78_sym_diff_handler): New function.
(msp430_howto_table): Use the new function for the SYM_DIFF reloc.
(msp430x_howto_table): Likewise.
When building a shared lib from non-PIC objects, we'll get dynamic
text relocations. These need to move with any insns we move.
Otherwise the dynamic reloc will modify the branch, resulting in
crashes and other unpleasant behaviour.
Also, ld -r --ppc476-workaround used with sufficiently aligned PIC
objects needs a fix for emitted REL16 relocs.
bfd/
* elf64-ppc.c (ppc_elf_relocate_section): Move dynamic text
relocs with insns moved by --ppc476-workaround. Correct
output of REL16 relocs.
ld/testsuite/
* ld-powerpc/ppc476-shared.s,
* ld-powerpc/ppc476-shared.lnk,
* ld-powerpc/ppc476-shared.d,
* ld-powerpc/ppc476-shared2.d: New tests.
* ld-powerpc/powerpc.exp: Run them.
BFD_RELOC_AARCH64_TLSLE_ADD_LO12 is used to generate simplest
one-instruction addressing for TLS LE model when tls size is smaller
4K. Linker need to make sure there is no TLS offset overflow.
2015-06-01 Jiong Wang <jiong.wang@arm.com>
bfd/
* elfnn-aarch64.c (elfNN_aarch64_howto_table): Set overflow type to
complain_overflow_unsigned for BFD_RELOC_AARCH64_TLSLE_ADD_LO12.
* elfxx-aarch64.c (_bfd_aarch64_elf_resolve_relocation): Don't use
PGOFF for BFD_RELOC_AARCH64_TLSLE_ADD_LO12, that will mask off all
potential high overflowed bits.
ld/testsuite/
* ld-aarch64/tprel_add_lo12_overflow.s: New testcase.
* ld-aarch64/tprel_add_lo12_overflow.d: Nex expectation file.
* ld-aarch64/aarch64-elf.exp: Run new testcase.
