In gdb/aarch64-linux-tdep.c we find:
...
gdb::byte_vector za_zeroed (za_bytes, 0);
regcache->raw_supply (tdep->sme_za_regnum, za_zeroed);
...
We can't use reg_buffer::raw_supply_zeroed here because only part of the
register is written.
Add raw_supply_part_zeroed, and use it instead.
Likewise elsewhere in AArch64 tdep code.
Tested on aarch64-linux.
Approved-By: Luis Machado <luis.machado@arm.com>
This commit is the result of the following actions:
- Running gdb/copyright.py to update all of the copyright headers to
include 2024,
- Manually updating a few files the copyright.py script told me to
update, these files had copyright headers embedded within the
file,
- Regenerating gdbsupport/Makefile.in to refresh it's copyright
date,
- Using grep to find other files that still mentioned 2023. If
these files were updated last year from 2022 to 2023 then I've
updated them this year to 2024.
I'm sure I've probably missed some dates. Feel free to fix them up as
you spot them.
Change most of regcache (and base classes) to use array_view when
possible, instead of raw pointers. By propagating the use of array_view
further, it enables having some runtime checks to make sure the what we
read from or write to regcaches has the expected length (such as the one
in the `copy(array_view, array_view)` function. It also integrates well
when connecting with other APIs already using gdb::array_view.
Add some overloads of the methods using raw pointers to avoid having to
change all call sites at once (which is both a lot of work and risky).
I tried to do this change in small increments, but since many of these
functions use each other, it ended up simpler to do it in one shot than
having a lot of intermediary / transient changes.
This change extends into gdbserver as well, because there is some part
of the regcache interface that is shared.
Changing the reg_buffer_common interface to use array_view caused some
build failures in nat/aarch64-scalable-linux-ptrace.c. That file
currently "takes advantage" of the fact that
reg_buffer_common::{raw_supply,raw_collect} operates on `void *`, which
IMO is dangerous. It uses raw_supply/raw_collect directly on
uint64_t's, which I guess is fine because it is expected that native
code will have the same endianness as the debugged process. To
accomodate that, add some overloads of raw_collect and raw_supply that
work on uint64_t.
This file also uses raw_collect and raw_supply on `char` pointers.
Change it to use `gdb_byte` pointers instead. Add overloads of
raw_collect and raw_supply that work on `gdb_byte *` and make an
array_view on the fly using the register's size. Those call sites could
be converted to use array_view with not much work, in which case these
overloads could be removed, but I didn't want to do it in this patch, to
avoid starting to dig in arch-specific code.
During development, I inadvertently changed reg_buffer::raw_compare's
behavior to not accept an offset equal to the register size. This
behavior (effectively comparing 0 bytes, returning true) change was
caught by the AArch64 SME core tests. Add a selftest to make sure that
this raw_compare behavior is preserved in the future.
Change-Id: I9005f04114543ddff738949e12d85a31855304c2
Reviewed-By: John Baldwin <jhb@FreeBSD.org>
Right now, gdbsupport/common-regcache.h contains two abstractons for a
regcache. An opaque type `regcache` (gdb and gdbserver both have their
own regcache that is the concrete version of this) and an abstract base
class `reg_buffer_common`, that is the base of regcaches on both sides.
These abstractions allow code to be written for both gdb and gdbserver,
for instance in the gdb/arch sub-directory.
However, having two
different abstractions is impractical. If some common code has a regcache,
and wants to use an operation defined on reg_buffer_common, it can't.
It would be better to have just one. Change all instances of `regcache
*` in gdbsupport/common-regcache.h to be `reg_buffer_common *`, then fix
fallouts.
Implementations in gdb and gdbserver now need to down-cast (using
gdb::checked_static_cast) from reg_buffer_common to their concrete
regcache type. Some of them could be avoided by changing free functions
(like regcache_register_size) to be virtual methods on
reg_buffer_common. I tried it, it seems to work, but I did not include
it in this series to avoid adding unnecessary changes.
Change-Id: Ia5503adb6b5509a0f4604bd2a68b4642cc5283fd
Reviewed-by: John Baldwin <jhb@FreeBSD.org>
This commit is the result of running the gdb/copyright.py script,
which automated the update of the copyright year range for all
source files managed by the GDB project to be updated to include
year 2023.
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
It possible that a thread whose PC we attempt to read is already dead.
In this case, 'regcache_read_pc' errors out. This impacts the
"proceed" execution flow, where GDB quits early before having a chance
to check if there exists a pending event. To remedy, keep going with
a 0 value for the PC if 'regcache_read_pc' fails. Because the value
of PC before resuming a thread is mostly used for storing and checking
the next time the thread stops, this tolerance is expected to be
harmless for a dead thread/process.
gdb/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* regcache.c (regcache_read_pc_protected): New function
implementation that returns 0 if the PC cannot read via
'regcache_read_pc'.
* infrun.c (proceed): Call 'regcache_read_pc_protected'
instead of 'regcache_read_pc'.
(keep_going_pass_signal): Ditto.
gdbsupport/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* common-regcache.h (regcache_read_pc_protected): New function
declaration.
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
