This patch fixes several test ERRORs and FAILs seen from running
gdb.python tests on a remote Windows host. The problems fixed
generally fall into these categories:
- Failure to copy the .py script to the host.
- Confusion between build and host pathnames.
- Assuming pathnames printed on the host include "/" as a directory
separator.
- Tests that need to be conditionally disabled due to missing features
on the host, etc.
2019-08-13 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
* gdb.python/py-completion.exp: Download the .py file to the host
and use its host pathname. Conditionalize tests that use
tab completion and manipulate files on the build machine.
* gdb.python/py-events.exp: Download the .py file to the host
and use its host pathname.
* gdb.python/py-evsignal.exp: Likewise.
* gdb.python/py-evthreads.exp: Likewise.
* gdb.python/py-framefilter-invalidarg.exp: Match Windows
pathname syntax.
* gdb.python/py-framefilter.exp: Download the .py file to the right
place on the host. Match Windows pathname syntax.
* gdb.python/py-mi-var-info-path-expression.exp: Download the
.py file to the host and use its host pathname.
* gdb.python/py-objfile-script.exp: Match Windows pathname syntax.
* gdb.python/py-objfile.exp: Expect a host pathname, not a
build pathname. Skip symlink test on Windows host. Add missing
newline at end of file.
* gdb.python/py-pp-maint.exp: Download the .py file to the host
and use its host pathname.
* gdb.python/py-pp-registration.exp: Match Windows pathname syntax.
* gdb.python/py-section-script.exp: Use host location of binfile
on safe-path. Use correct path separator on Windows host.
Reorder alternatives in gdb_test_multiple to prevent matching
the wrong alternative on success.
* gdb.python/py-symtab.exp: Match Windows pathname syntax.
As discussed on gdb-patches, this removes the readline hack from the
mingw-hdep.c version of gdb_select. It's believed that this is not
needed any more. See:
https://sourceware.org/ml/gdb-patches/2019-03/msg00465.html
gdb/ChangeLog
2019-08-12 Tom Tromey <tom@tromey.com>
* mingw-hdep.c (gdb_select): Remove readline hack.
After the sync there is one testsuite regression, the test
"signal SIGINT" in gdb.gdb/selftest.exp which now FAILs. Previously,
the readline 6.2 SIGINT handler would temporarily reinstall the
underlying application's SIGINT handler and immediately re-raise SIGINT
so that the orginal handler gets invoked. But now (since readline 6.3)
its SIGINT handler does not re-raise SIGINT or directly invoke the
original handler; it now sets a flag marking that SIGINT was raised, and
waits until readline explicitly has control to call the application's
SIGINT handler. Anyway, because SIGINT is no longer re-raised from
within readline's SIGINT handler, doing "signal SIGINT" with a stopped
inferior gdb process will no longer resume and then immediately stop the
process (since there is no 2nd SIGINT to immediately catch). Instead,
the inferior gdb process will now just print "Quit" and continue to run.
So with this commit, this particular test case is adjusted to reflect
this change in behavior (we now have to send a 2nd SIGINT manually to
stop it).
gdb/testsuite/ChangeLog
2019-08-12 Patrick Palka <patrick@parcs.ath.cx>
* gdb.gdb/selftest.exp (test_with_self): Update test to now
expect the GDB inferior to no longer immediately stop after
being resumed with "signal SIGINT".
There is a gdb-local patch to deal with interrupts during completion.
The original thread adding this patch is here:
https://sourceware.org/ml/gdb-patches/2011-06/msg00147.html
I believe readline now implements the approach suggested by
Chet Ramey:
https://sourceware.org/ml/gdb-patches/2011-06/msg00493.html
So, I believe this patch can be removed.
readline/ChangeLog.gdb
2018-10-07 Tom Tromey <tom@tromey.com>
* Makefile.in (xfree.o): Don't depend on readline.h.
* xfree.c (xfree): Remove gdb workaround.
* xmalloc.h (xfree): Remove #define.
There is a gdb-local patch in readline/emacs_keymap.c that says:
/* Temporary - this is a bug in readline 5.1 that should be fixed in
readline 5.2. */
So, I think this can be removed now. I have no way to test this, as
the patch was specific to mingw.
readline/ChangeLog.gdb
2018-10-07 Tom Tromey <tom@tromey.com>
* emacs_keymap.c: Remove gdb workaround.
This removes a gdb-local patch from readline's get_y_or_n. The code
references a gdb test that continues to work when I remove this patch.
So, I think it is not needed any more.
readline/ChangeLog.gdb
2018-10-07 Tom Tromey <tom@tromey.com>
* complete.c (get_y_or_n): Remove gdb workaround.
This imports readline 7.0 (up to patch 5) while preserving all
gdb-local changes.
This was done by checking out the readline git repository, making a
branch based on the gdb baseline revision, applying the gdb changes to
that branch, and then merging from readline 7.
readline/ChangeLog.gdb
2019-08-12 Tom Tromey <tom@tromey.com>
* Imported readline 7.0 patch 5.
This is a change to the first published specifications [1][a] but since there is no hardware
out there that uses the old instructions we do not want to support the old variant.
This changes are done based on the latest published specifications [1][b].
[1] https://developer.arm.com/architectures/cpu-architecture/m-profile/docs/ddi0553/latest/armv81-m-architecture-reference-manual
[a] version bf
[b] version bh
gas * config/tc-arm.c (enum operand_parse_code): Add the entry OP_I48_I64.
(po_imm1_or_imm2_or_fail): Marco to check the immediate is either of
48 or 64.
(parse_operands): Add case OP_I48_I64.
(do_mve_scalar_shift1): Add function to encode the MVE shift
instructions with 4 arguments.
* testsuite/gas/arm/mve-shift-bad.l: Modify.
* testsuite/gas/arm/mve-shift-bad.s: Likewise.
* testsuite/gas/arm/mve-shift.d: Likewise.
* testsuite/gas/arm/mve-shift.s: Likewise.
opcodes * arm-dis.c (struct mopcode32 mve_opcodes): Modify the mask for
cases MVE_SQRSHRL and MVE_UQRSHLL.
(print_insn_mve): Add case for specifier 'k' to check
specific bit of the instruction.
Half precision floating point numbers will be encoded using the IEEE 754
half precision floating point format - 16 bits in total, 1 for sign, 5
for exponent and 10 bits of mantissa.
This patch implements the float16 directive for both the IEEE 754 format
and the Arm alternative format for the Arm backend.
The syntax of the directive is:
.float16 <0-n decimal numbers>
e.g.
.float16 12.0
.float16 0.23, 433.1, 0.06
The Arm alternative format is almost identical to the IEEE 754 format,
except that it doesn't encode for NaNs or Infinity (instead an exponent
of 0x1F represents a normalized number in the range 65536 to 131008).
The alternative format is documented in the reference manual:
https://static.docs.arm.com/ddi0487/db/DDI0487D_b_armv8_arm.pdf?_ga=2.72318806.49764181.1561632697-999473562.1560847439
Which format is used is controlled by the .float16_format <format>
directive, where if <format> = ieee, then use the IEEE 754
half-precision format else if <format> = alternative, then use the
Arm alternative format
Or the format can be set on the command line via the -mfp16-format
option that has a similar syntax. -mfp16-format=<ieee|alternative>.
This also fixes the format and it cannot be changed by any directives.
Once the format has been set (either by the command line option or a directive) it cannot be changed,
and any attempts to change it (i.e. with the float16_format directive) will result in a warning and the
line being ignored.
For ELF targets the appropriate EABI attribute will be written out at the end of assembling
if the format has been explicitly specified. If no format has been explicitly specified then no
EABI attributes will be written.
If the format is not explicitly specified then any float16 directives are encoding using the IEEE 754-2008
format by default until the format is fixed or changed with the float16_format directive.
gas * config/tc-arm.c (enum fp_16bit_format): Add enum to represent the 2 float16 encodings.
(md_atof): Set precision for float16 type.
(arm_is_largest_exponent_ok): Check for whether to encode with the IEEE or alternative
format.
(set_fp16_format): Parse a float16_format directive.
(arm_parse_fp16_opt): Parse the fp16-format command line option.
(aeabi_set_public_attributes): For ELF encode the FP16 format EABI attribute.
* config/tc-arm.h (TC_LARGEST_EXPONENT_IS_NORMAL): Macro that expands to
arm_is_largest_exponent_ok.
(arm_is_largest_exponent_ok): Add prototype for arm_is_largest_exponent_ok function.
* doc/c-arm.texi: Add documentation for .float16, .float16_format and -mfp16-format=
* testsuite/gas/arm/float16-bad.d: New test.
* testsuite/gas/arm/float16-bad.l: New test.
* testsuite/gas/arm/float16-bad.s: New test.
* testsuite/gas/arm/float16-be.d: New test.
* testsuite/gas/arm/float16-format-bad.d: New test.
* testsuite/gas/arm/float16-format-bad.l: New test.
* testsuite/gas/arm/float16-format-bad.s: New test.
* testsuite/gas/arm/float16-format-opt-bad.d: New test.
* testsuite/gas/arm/float16-format-opt-bad.l: New test.
* testsuite/gas/arm/float16-le.d: New test.
* testsuite/gas/arm/float16.s: New test.
* testsuite/gas/arm/float16-eabi-alternative-format.d: New test.
* testsuite/gas/arm/float16-eabi-ieee-format.d: New test.
* testsuite/gas/arm/float16-eabi-no-format.d: New test.
* testsuite/gas/arm/float16-eabi.s: New test.
* config/atof-ieee.c (H_PRECISION): Macro for precision of float16
type.
(atof_ieee): Set precision and exponent bits for encoding float16
types.
(gen_to_words): NaN and Infinity encoding for float16.
(ieee_md_atof): Set precision for encoding float16 type.
"next" and "next_real_file" in lang_input_statement_type always point
to another lang_input_statement_type, so it makes sense for these to
not be the generic lang_statement_union_type. This patch also updates
a number of variables in ldlang.c for the same reason, and modifies
lang_statement_append to reduce the need for casts.
* ldlang.h (lang_input_statement_type): Make next
and next_real_file a lang_input_statement_type pointer.
(lang_statement_append): Delete prototype.
(LANG_FOR_EACH_INPUT_STATEMENT): Update for lang_input_statement_type
change.
* ldmain.c (add_archive_element): Likewise.
* ldlang.c: Likewise throughout.
(lang_statement_append): Make static. Make element and field
void pointers. Remove casts in calls.
(lang_check): Use a lang_input_statement_type pointer for "file".
(find_rescan_insertion): Similarly for "iter" and return value.
(lang_process): Similarly for "insert", "iter" and "temp".
* emultempl/spuelf.em (embedded_spu_file): Likewise.
* emultempl/aix.em (gld${EMULATION_NAME}_before_allocation): Expand
lang_statment_append call.
This patch changes find_pc_partial_function so that *block is set to
nullptr when it fails, so that fill_in_stop_func won't access an
uninitialized variable.
gdb/ChangeLog:
2019-08-09 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* blockframe.c (find_pc_partial_function): Set *block to nullptr
when the function fails.
The align.exp test case yields many FAILs on s390x, since GDB's _Alignoff
doesn't always agree with the compiler's. On s390x, the maximum alignment
is 8, but GDB returns an alignment of 16 for 16-byte data types such as
"long double".
This is fixed by implementing the type_align gdbarch method. The new
method returns an alignment of 8 for all integer, floating-point, and
vector types larger than 8 bytes. With this change, all align.exp tests
pass.
gdb/ChangeLog:
* s390-tdep.c (s390_type_align): New function.
(s390_gdbarch_init): Set it as type_align gdbarch method.
This patch is a reimplementation of [1] which was submitted in 2015 by
Neil Schellenberger. Copyright issue was sorted out [2] last year.
It proposed a new section (.gnu.xhash) and related dynamic tag
(DT_GNU_XHASH). The new section would be virtually identical to the
existing .gnu.hash except for the translation table (xlat) which would
contain correct MIPS .dynsym indexes corresponding to the hashvals in
chains. This is because MIPS ABI imposes a different ordering on the
dynsyms than the one expected by the .gnu.hash section. Another addition
would be a leading word (ngnusyms) which would contain the number of
entries in the translation table.
In this patch, the new section name and dynamic tag are changed to
reflect the fact that the section should be treated as MIPS-specific
(.MIPS.xhash and DT_MIPS_XHASH).
This patch addresses the alignment issue as reported in [3], which is
caused by the leading word added to the .MIPS.xhash section. Leading word
is removed in this patch, and the number of entries in the translation
table is now calculated using DT_MIPS_SYMTABNO dynamic tag (this is
addressed by the corresponding glibc patch).
Suggestions on coding style in [4] were taken into account. Existing
GNU hash testcase was covered, and another one was added in the MIPS
part of the testsuite.
The other major change is reserving MIPS ABI version 5 for .MIPS.xhash,
marking the need of support for .MIPS.xhash in the dynamic linker (again,
addressed in the corresponding glibc patch). This is something which I
am not sure of, especially after reading [5]. I am confused on whether
this ABI version is reserved for IFUNC, or it can be used for this
purpose.
Already mentioned glibc patch is submitted at:
https://sourceware.org/ml/libc-alpha/2019-06/msg00456.html
[1] https://sourceware.org/ml/binutils/2015-10/msg00057.html
[2] https://sourceware.org/ml/binutils/2018-03/msg00025.html
[3] https://sourceware.org/ml/binutils/2016-01/msg00006.html
[4] https://sourceware.org/ml/binutils/2016-02/msg00097.html
[5] https://sourceware.org/ml/libc-alpha/2016-12/msg00853.html
ld * emulparams/elf32bmip.sh: Add .MIPS.xhash section.
* emulparams/elf32bmipn32-defs.sh: Add .MIPS.xhash section.
* emulparams/elf64bmip-defs.sh: Add .MIPS.xhash section.
* emultempl/mipself.em: Remove mips_after_parse function.
* testsuite/ld-elf/hash.d: Update comment.
* testsuite/ld-mips-elf/hash1.d: New test.
* testsuite/ld-mips-elf/hash1.s: Ditto.
* testsuite/ld-mips-elf/hash1a.d: Remove.
* testsuite/ld-mips-elf/hash1b.d: Ditto.
* testsuite/ld-mips-elf/hash1c.d: Ditto
* testsuite/ld-mips-elf/hash2.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: New tests.
* testsuite/ld-mips-elf/start.s: New test.
bfd * elf-bfd.h (struct elf_backend_data): New members.
* elflink.c (_bfd_elf_link_create_dynamic_sections): Create
.gnu.hash section if necessary.
(struct collect_gnu_hash_codes): New member.
(elf_gnu_hash_process_symidx): New function name.
(elf_renumber_gnu_hash_syms): Ignore local and undefined
symbols. Record xlat location for every symbol which should have
a .MIPS.xhash entry.
(bfd_elf_size_dynamic_sections): Add DT_GNU_HASH dynamic tag to
dynamic section if necessary.
(GNU_HASH_SECTION_NAME): New define.
(bfd_elf_size_dynsym_hash_dynstr): Get .MIPS.xhash section.
Update the section size info.
* elfxx-mips.c (struct mips_elf_hash_sort_data): New members.
(struct mips_elf_link_hash_entry): New member.
(mips_elf_link_hash_newfunc): Initialize .MIPS.xhash translation
table location.
(mips_elf_sort_hash_table): Initialize the pointer to the
.MIPS.xhash section.
(mips_elf_sort_hash_table_f): Populate the .MIPS.xhash
translation table entry with the symbol dynindx.
(_bfd_mips_elf_section_from_shdr): Add SHT_MIPS_XHASH.
(_bfd_mips_elf_fake_sections): Initialize .MIPS.xhash section
info.
(_bfd_mips_elf_create_dynamic_sections): Create .MIPS.xhash
section.
(_bfd_mips_elf_size_dynamic_sections): Add DT_MIPS_XHASH tag to
dynamic section.
(_bfd_mips_elf_finish_synamic_sections): Add DT_MIPS_XHASH.
(_bfd_mips_elf_final_write_processing): Set .MIPS.xhash section
sh_link info.
(_bfd_mips_elf_get_target_dtag): Get DT_MIPS_XHASH tag.
(MIPS_LIBC_ABI_XHASH): New ABI version enum value.
(_bfd_mips_post_process_headers): Mark the ABI version as
MIPS_LIBC_ABI_XHASH if there exists a .MIPS.xhash section,
but not a .hash section.
(_bfd_mips_elf_record_xhash_symbol): New function. Record a
position in the translation table, associated with the hash
entry.
* elfxx-mips.h (literal_reloc_p): Define
elf_backend_record_xhash_symbol backend hook.
* elfxx-target.h: Initialize elf_backend_record_xhash_symbol
backend hook.
include * elf/mips.h (SHT_GNU_XHASH): New define.
(DT_GNU_XHASH): New define.
binutils * readelf.c (get_mips_dynamic_type): Return MIPS_XHASH dynamic type.
(get_mips_section_type_name): Return MI{S_XHASH name string.
(dynamic_section_mips_val): Initialize the .MIPS.xhash dynamic
info.
(process_symbol_table): Initialize the .MIPS.xhash section
pointer. Adjust the readelf output to support the new section.
(process_object): Set the .MIPS.xhash dynamic info to zero.
The following tests fail on wince as they rely on mapping symbols to
give them a fixed order.
This skips them on platforms that don't have mapping symbols.
binutils/ChangeLog:
* testsuite/binutils-all/arm/in-order-all.d: Skip on pe, wince, coff.
* testsuite/binutils-all/arm/in-order.d: Likewise.
* testsuite/binutils-all/arm/out-of-order-all.d: Likewise.
* testsuite/binutils-all/arm/out-of-order.d: Likewise.
In order to be able to add/remove insns to/from the middle of these
tests, generalize the patterns for the symbol reference comments of RIP-
relative operands.
With target board unix/-fPIE/-pie, we get:
...
FAIL: gdb.dwarf2/varval.exp: print varval2
...
This is due comparing a get_frame_pc result (which includes the for PIE
non-zero relocation offset) with pc_high and pc_low obtained using
get_scope_pc_bounds (which do not include the relocation offset).
Fix this by adjusting pc_high and pc_low with the relocation offset.
Tested on x86_64-linux with target board unix/-fPIE/-pie.
gdb/ChangeLog:
2019-08-09 Tom de Vries <tdevries@suse.de>
PR gdb/24591
* dwarf2read.c (dwarf2_fetch_die_loc_sect_off): Adjust pc_high and
pc_low with relocation offset.
With gdb.tui/basic.exp and check-read1, we run into (using -v for
verbose log):
...
^[[0+++ _csi_0 <<<>>>
ERROR: (DejaGnu) proc "_csi_0" does not exist.
...
In contrast, without check-read1, we have:
...
^[[0;10m<SNIP>+++ _csi_m <<<0;10>>>
...
The problem is that this regexp in _accept:
...
-re "^\x1b\\\[(\[0-9;\]*)(\[0-9a-zA-Z@\])" {
...
while matching the longer sequence '^[' '[' '0' ';' '1' '0' 'm', also matches
the shorter sequence '^[' '[' '0'.
The regexp attempts to match a CSI (Control Sequence Introducer) sequence, and
the final byte of such a sequence cannot be a digit.
Fix the regexp accordingly:
...
- -re "^\x1b\\\[(\[0-9;\]*)(\[0-9a-zA-Z@\])" {
+ -re "^\x1b\\\[(\[0-9;\]*)(\[a-zA-Z@\])" {
...
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-08-08 Tom de Vries <tdevries@suse.de>
PR testsuite/24862
* lib/tuiterm.exp (_accept): Fix CSI regexp.
When printing unknown note types, readelf prints the raw description
section byte-by-byte. However, it does not mask appropriately, e.g. it
prints the byte 'ba' as 'ffffffba'.
* readelf.c (process_note): Mask unknown description data bytes.
PR 24854
* arc-dis.c (arc_insn_length): Return 0 rather than aborting when
encountering an unknown machine type.
(print_insn_arc): Handle arc_insn_length returning 0. In error
cases return -1 rather than calling abort.
I noticed the test for overflow of amt = size * nmemb in get_data
wasn't effective. An obvious example of nmemb = 3 and size = half max
value overflows but doesn't result in amt < nmemb. This patch fixes
this problem and reports a size truncation or overflow rather than out
of memory in more cases.
* readelf.c (get_data): Improve overflow checks.
PR 24777
* doc/binutils.texi: Ensure consistent formating of title strings
for man pages. Extend the title of the size man page to be more
informative.
This changes struct frame_arg to be self-managing and then fixes the
various users.
Tested by the buildbot.
gdb/ChangeLog
2019-08-07 Tom Tromey <tromey@adacore.com>
* stack.c (print_frame_arg, read_frame_local, read_frame_arg)
(print_frame_args): Update.
* python/py-framefilter.c (py_print_single_arg, enumerate_args):
Update.
* mi/mi-cmd-stack.c (list_arg_or_local): Update.
* frame.h (struct frame_arg): Add initializers.
<error>: Now a unique_xmalloc_ptr.
Armv8.3-a Pointer Authentication causes the function return address to be
obfuscated on entry to some functions. GDB must unmask the link register in
order to produce a backtrace.
The following patch adds markers of [PAC] to the bracktrace, to indicate
which addresses needed unmasking. This includes the backtrace when using MI.
For example, consider the following backtrace:
(gdb) bt
0 0x0000000000400490 in puts@plt ()
1 0x00000000004005dc in foo ("hello") at cbreak-lib.c:6
2 0x0000000000400604 [PAC] in bar () at cbreak-lib.c:12
3 0x0000000000400620 [PAC] in main2 () at cbreak.c:17
4 0x00000000004005b4 in main () at cbreak-3.c:10
The functions in cbreak-lib use pointer auth, which masks the return address
to the previous function, causing the addresses of bar (in the library) and main2
(in the main binary) to require unmasking in order to unwind the backtrace.
An extra bool is added alongside the prev_pc in the frame structure. At the
point at which the link register is unmasked, the AArch64 port calls into frame
to sets the bool. This is the most efficient way of doing it.
The marker is also added to the python frame printer, which is always printed if
set. The marker is not explicitly exposed to the python code.
I expect this will potentially cause issues with some tests in the testsuite
when Armv8.3 pointer authentication is used. This should be fixed up in the
the future once real hardware is available for full testsuite testing.
gdb/ChangeLog:
* NEWS: Expand the Pointer Authentication entry.
* aarch64-tdep.c (aarch64_frame_unmask_address): Rename from this.
(aarch64_frame_unmask_lr): ... to this.
(aarch64_prologue_prev_register, aarch64_dwarf2_prev_register):
Call aarch64_frame_unmask_lr.
* frame.c (struct frame_info): Add "masked" variable.
(frame_set_previous_pc_masked) (frame_get_pc_masked): New functions.
(fprint_frame): Check for masked pc.
* frame.h (frame_set_previous_pc_masked) (frame_get_pc_masked): New
declarations.
* python/py-framefilter.c (py_print_frame): Check for masked pc.
* stack.c (print_frame): Check for masked pc.
gdb/doc/ChangeLog:
* gdb.texinfo (AArch64 Pointer Authentication): New subsection.
This patch makes the elf64bpf emulation to use it's own linker script,
based on elf.sc. At the moment, the only change is that the BPF
executable doesn't define an entry symbol (BPF programs feature
several entry points scattered in several sections.)
This is a step towards the goal of generating proper ELF executables
that would be loaded by the kernel's libbpf. We are not there yet:
BPF "programs" should still be linked with -r.
This change removes a warning while linking executables, decreases the
number of unsupported tests in the target from 47 to 29, and increases
the number of expected passes from 104 to 145.
Regtested in x86_64 for all targets.
No regressions.
ld/ChangeLog:
2019-08-07 Jose E. Marchesi <jose.marchesi@oracle.com>
* scripttempl/elf64bpf.sc: Adapted from elf.sc.
* emulparams/elf64bpf.sh (SCRIPT_NAME): Use elf64bpf.
(EMBEDDED): Define.
* testsuite/ld-bpf/call-1.d: Do not expect a warning regarding an
undefined entry symbol.
* testsuite/ld-bpf/jump-1.d: Likewise.
* testsuite/ld-undefined/undefined.exp: Do not pass '-e entry' to
ld in BPF targets, and do not expect line number information.
* testsuite/ld-srec/srec.exp (run_srec_test): xfail s-record tests
in BPF targets.
This patch changes the eBPF linker to provide a relocate_section
function instead of relying on using special functions in relocation
howtos.
Tested in x86_64 host.
No regressions.
bfd/ChangeLog:
2019-08-07 Jose E. Marchesi <jose.marchesi@oracle.com>
* elf64-bpf.c (bpf_elf_relocate_section): New function.
(bpf_elf_insn_disp_reloc): Delete function.
(elf_backend_relocate_section): Define.
* testsuite/binutils-all/objdump.exp
(test_objdump_dotnet_assemblies): Fix test to distinguish errors
in parsing simple pei-i386 and pei-x86-64 vs parsing the newly
introduced machine types.
* testsuite/gentestdlls.c (write_simple_dll): New function.
(main): Generate simple and Linux-specific variants of pei-i386
and pei-x86-64 files so both can be used by tests.
The flag is supposed to be used in templates which allow for both a
"short" and a "long" format memory operand. Drop it from templates not
matching this pattern. In the control/status word cases it was (ab)used
in place of the intended IgnoreSize.
This introduces obstack_strndup and changes gdb to use it.
Note that obstack_strndup works like savestring, and not exactly like
xstrndup. The difference is that obstack_strndup uses the passed-in
length, while xstrndup uses strnlen to choose the length.
gdb/ChangeLog
2019-08-06 Tom Tromey <tom@tromey.com>
* stabsread.c (patch_block_stabs, read_one_struct_field)
(read_enum_type): Use obstack_strndup.
* rust-exp.y (rust_parser::copy_name): Use obstack_strndup.
* gdb_obstack.h (obstack_strndup): Use obstack_strndup.
* dwarf2read.c (guess_full_die_structure_name)
(anonymous_struct_prefix): Use obstack_strndup.
* dbxread.c (cp_set_block_scope): Use obstack_strndup.
* c-exp.y (yylex): Use obstack_strndup.
* ada-exp.y (write_object_renaming, write_ambiguous_var)
(write_var_or_type): Use obstack_strndup.
This adds an obstack_strdup overload that takes a std::string, and
changes a few spots in gdb to use it.
gdb/ChangeLog
2019-08-06 Tom Tromey <tom@tromey.com>
* symfile.c (reread_symbols): Use obstack_strdup.
* stabsread.c (read_type): Use obstack_strdup.
* gdb_obstack.h (obstack_strdup): New overload.
* dwarf2read.c (dwarf2_compute_name, create_dwo_unit_in_dwp_v1)
(create_dwo_unit_in_dwp_v2, build_error_marker_type)
(dwarf2_canonicalize_name): Use obstack_strdup.
* dbxread.c (read_dbx_symtab): Use obstack_strdup.
* cp-support.c (inspect_type, replace_typedefs_qualified_name):
Use obstack_strdup.
