Remove a warning about mi1. mi1 was removed in 975249ff4e ("Remove MI
version 1"). It is no longer possible to reach this warning, since
trying to use interpreter mi1 bails out before:
$ ./gdb -nx -q --data-directory=data-directory -i mi1
Interpreter `mi1' unrecognized
Change-Id: Ie43b21e01bca1407995150c729531a70ee662003
Approved-By: Tom Tromey <tom@tromey.com>
It is a trivial wrapper around the supports_command_editing method,
remove it.
Change-Id: I0fe3d7dc69601b3b89f82e055f7fe3d4af1becf7
Approved-By: Tom Tromey <tom@tromey.com>
It is a trivial wrapper around the pre_command_loop method, remove it.
Change-Id: Idb2c61f9b68988528006a9a9b2b528f43781eef4
Approved-By: Tom Tromey <tom@tromey.com>
Currently, each target backend is responsible for printing "[Thread
...exited]" before deleting a thread. This leads to unnecessary
differences between targets, like e.g. with the remote target, we
never print such messages, even though we do print "[New Thread ...]".
E.g., debugging the gdb.threads/attach-many-short-lived-threads.exp
with gdbserver, letting it run for a bit, and then pressing Ctrl-C, we
currently see:
(gdb) c
Continuing.
^C[New Thread 3850398.3887449]
[New Thread 3850398.3887500]
[New Thread 3850398.3887551]
[New Thread 3850398.3887602]
[New Thread 3850398.3887653]
...
Thread 1 "attach-many-sho" received signal SIGINT, Interrupt.
0x00007ffff7e6a23f in __GI___clock_nanosleep (clock_id=clock_id@entry=0, flags=flags@entry=0, req=req@entry=0x7fffffffda80, rem=rem@entry=0x7fffffffda80)
at ../sysdeps/unix/sysv/linux/clock_nanosleep.c:78
78 in ../sysdeps/unix/sysv/linux/clock_nanosleep.c
(gdb)
Above, we only see "New Thread" notifications, even though threads
were deleted.
After this patch, we'll see:
(gdb) c
Continuing.
^C[Thread 3558643.3577053 exited]
[Thread 3558643.3577104 exited]
[Thread 3558643.3577155 exited]
[Thread 3558643.3579603 exited]
...
[New Thread 3558643.3597415]
[New Thread 3558643.3600015]
[New Thread 3558643.3599965]
...
Thread 1 "attach-many-sho" received signal SIGINT, Interrupt.
0x00007ffff7e6a23f in __GI___clock_nanosleep (clock_id=clock_id@entry=0, flags=flags@entry=0, req=req@entry=0x7fffffffda80, rem=rem@entry=0x7fffffffda80)
at ../sysdeps/unix/sysv/linux/clock_nanosleep.c:78
78 in ../sysdeps/unix/sysv/linux/clock_nanosleep.c
(gdb) q
This commit fixes this by moving the thread exit printing to common
code instead, triggered from within delete_thread (or rather,
set_thread_exited).
There's one wrinkle, though. While most targest want to print:
[Thread ... exited]
the Windows target wants to print:
[Thread ... exited with code <exit_code>]
... and sometimes wants to suppress the notification for the main
thread. To address that, this commits adds a delete_thread_with_code
function, only used by that target (so far).
This fix was originally posted as part of a larger series:
https://inbox.sourceware.org/gdb-patches/20221212203101.1034916-1-pedro@palves.net/
But didn't really need to be part of that series. In order to get
this fix merged sooner, I (Andrew Burgess) have rebased this commit
outside of the original series. Any bugs introduced while splitting
this patch out and rebasing, are entirely my own.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30129
Co-Authored-By: Andrew Burgess <aburgess@redhat.com>
Same idea as previous patches, but for inferior_disappeared.
For symmetry with on_inferior_appeared, I named this one
on_inferior_disappeared, despite the observer being called
inferior_exit. This is called when detaching an inferior, so I think
that calling it "disappeared" is a bit less misleading (the observer
should probably be renamed later).
Change-Id: I372101586bc9454997953c1e540a2a6685f53ef6
Same idea as previous patches, but for inferior_added.
mi_interp::init avoided using mi_inferior_added, since, as the comment
used to say, it would notify all MI interpreters. Now, it's easy to
only notify the new interpreter, so it's possible to just call the
on_inferior_added method in mi_interp::init.
Change-Id: I0eddbd5367217d1c982516982089913019ef309f
Same as previous patch, but for exited. Remove the exited observable,
since nothing uses it anymore, and we don't have anything coming that
will use it.
Change-Id: I358cbea0159af56752dfee7510d6a86191e722bb
Same as previous patch, but for signal_exited. Remove the signal_exited
observable, since nothing uses it anymore, and we don't have anything
coming that will use it.
Change-Id: I0dca1eab76338bf27be755786e3dad3241698b10
Instead of having the interpreter code registering observers for the
signal_received observable, add a "signal_received" virtual method to
struct interp. Add a interps_notify_signal_received function that loops
over all UIs and calls the signal_received method on the interpreter.
Finally, add a notify_signal_received function that calls
interps_notify_signal_received and then notifies the observers. Replace
all existing notifications to the signal_received observers with calls
to notify_signal_received.
Before this patch, the CLI and MI code both register a signal_received
observer. These observer go over all UIs, and, for those that have a
interpreter of the right kind, print the stop notifiation.
After this patch, we have just one "loop over all UIs", inside
interps_notify_signal_received. Since the interp::on_signal_received
method gets called once for each interpreter, the implementations only
need to deal with the current interpreter (the "this" pointer).
The motivation for this patch comes from a future patch, that makes the
amdgpu code register an observer to print a warning after the CLI's
signal stop message. Since the amdgpu and the CLI code both use
observers, the order of the two messages is not stable, unless we define
the priority using the observer dependency system. However, the
approach of using virtual methods on the interpreters seems like a good
change anyway, I think it's more straightforward and simple to
understand than the current solution that uses observers. We are sure
that the amdgpu message gets printed after the CLI message, since
observers are notified after interpreters.
Keep the signal_received, even if nothing uses if, because we will be
using it in the upcoming amdgpu patch implementing the warning described
above.
Change-Id: I4d8614bb8f6e0717f4bfc2a59abded3702f23ac4
I don't think that having struct ui_interp_info separated from struct ui
is very useful. As of today, it looks like an unnecessary indirection
layer. Move the contents of ui_interp_info directly into struct ui, and
update all users.
Change-Id: I817ba6e047dbcc4ba15b666af184b40bfed7e521
I'd like to move some things so they become methods on struct ui. But
first, I think that struct ui and the related things are big enough to
deserve their own file, instead of being scattered through top.{c,h} and
event-top.c.
Change-Id: I15594269ace61fd76ef80a7b58f51ff3ab6979bc
I realized that the memory for interp names does not need to be
allocated. The name used to register interp factory functions is always
a literal string, so has static storage duration. If we change
interp_lookup to pass that name instead of the string that it receives
as a parameter (which does not always have static storage duration),
then interps can simply store pointers to the name.
So, change interp_lookup to pass `factory.name` rather than `name`.
Change interp::m_name to be a `const char *` rather than an std::string.
Change-Id: I0474d1f7b3512e7d172ccd73018aea927def3188
Reviewed-By: Tom Tromey <tom@tromey.com>
get_interp_info and get_current_interp_info always return non-nullptr,
so they can return a reference instead of a pointer.
Since we don't need to copy it, make ui_interp_info non-copyiable, to
avoid a copying it in a local variable, instead of getting a reference.
Change-Id: I6d8dea92dc26a58ea340d04862db6b8d9cf906a0
Reviewed-By: Tom Tromey <tom@tromey.com>
This patch implements a simplication that I suggested here:
https://sourceware.org/pipermail/gdb-patches/2022-March/186320.html
Currently, the interp::exec virtual method interface is such that
subclass implementations must catch exceptions and then return them
via normal function return.
However, higher up the in chain, for the CLI we get to
interpreter_exec_cmd, which does:
for (i = 1; i < nrules; i++)
{
struct gdb_exception e = interp_exec (interp_to_use, prules[i]);
if (e.reason < 0)
{
interp_set (old_interp, 0);
error (_("error in command: \"%s\"."), prules[i]);
}
}
and for MI we get to mi_cmd_interpreter_exec, which has:
void
mi_cmd_interpreter_exec (const char *command, char **argv, int argc)
{
...
for (i = 1; i < argc; i++)
{
struct gdb_exception e = interp_exec (interp_to_use, argv[i]);
if (e.reason < 0)
error ("%s", e.what ());
}
}
Note that if those errors are reached, we lose the original
exception's error code. I can't see why we'd want that.
And, I can't see why we need to have interp_exec catch the exception
and return it via the normal return path. That's normally needed when
we need to handle propagating exceptions across C code, like across
readline or ncurses, but that's not the case here.
It seems to me that we can simplify things by removing some
try/catch-ing and just letting exceptions propagate normally.
Note, the "error in command" error shown above, which only exists in
the CLI interpreter-exec command, is only ever printed AFAICS if you
run "interpreter-exec console" when the top level interpreter is
already the console/tui. Like:
(gdb) interpreter-exec console "foobar"
Undefined command: "foobar". Try "help".
error in command: "foobar".
You won't see it with MI's "-interpreter-exec console" from a top
level MI interpreter:
(gdb)
-interpreter-exec console "foobar"
&"Undefined command: \"foobar\". Try \"help\".\n"
^error,msg="Undefined command: \"foobar\". Try \"help\"."
(gdb)
nor with MI's "-interpreter-exec mi" from a top level MI interpreter:
(gdb)
-interpreter-exec mi "-foobar"
^error,msg="Undefined MI command: foobar",code="undefined-command"
^done
(gdb)
in both these cases because MI's -interpreter-exec just does:
error ("%s", e.what ());
You won't see it either when running an MI command with the CLI's
"interpreter-exec mi":
(gdb) interpreter-exec mi "-foobar"
^error,msg="Undefined MI command: foobar",code="undefined-command"
(gdb)
This last case is because MI's interp::exec implementation never
returns an error:
gdb_exception
mi_interp::exec (const char *command)
{
mi_execute_command_wrapper (command);
return gdb_exception ();
}
Thus I think that "error in command" error is pretty pointless, and
since it simplifies things to not have it, the patch just removes it.
The patch also ends up addressing an old FIXME.
Change-Id: I5a6432a80496934ac7127594c53bf5221622e393
Approved-By: Tom Tromey <tromey@adacore.com>
Approved-By: Kevin Buettner <kevinb@redhat.com>
This commit is the result of running the gdb/copyright.py script,
which automated the update of the copyright year range for all
source files managed by the GDB project to be updated to include
year 2023.
MI version 1 is long since obsolete. Rather than remove it
immediately (though I did send a patch for that), instead let's
deprecate it in GDB 13 and then remove it for GDB 14.
This version of the patch incorporates Simon's warning change, and
Luis' recommendation to mention the gdb versions here.
Currently, every internal_error call must be passed __FILE__/__LINE__
explicitly, like:
internal_error (__FILE__, __LINE__, "foo %d", var);
The need to pass in explicit __FILE__/__LINE__ is there probably
because the function predates widespread and portable variadic macros
availability. We can use variadic macros nowadays, and in fact, we
already use them in several places, including the related
gdb_assert_not_reached.
So this patch renames the internal_error function to something else,
and then reimplements internal_error as a variadic macro that expands
__FILE__/__LINE__ itself.
The result is that we now should call internal_error like so:
internal_error ("foo %d", var);
Likewise for internal_warning.
The patch adjusts all calls sites. 99% of the adjustments were done
with a perl/sed script.
The non-mechanical changes are in gdbsupport/errors.h,
gdbsupport/gdb_assert.h, and gdb/gdbarch.py.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Change-Id: Ia6f372c11550ca876829e8fd85048f4502bdcf06
This changes interp::m_name to be a unique_xmalloc_ptr, removing some
manual memory management. It also cleans up the initialization of the
'inited' member, and moves the 'private:' and 'public:' keywords to
their proper spots.
Since this commit:
commit 8322445e05
Date: Tue Jun 21 01:11:45 2016 +0100
Introduce interpreter factories
Interpreters should be registered with GDB, not by calling interp_add,
but with a call to interp_factory_register. I've checked the insight
source, and it too has moved over to using interp_factory_register.
In this commit I make interp_add static within interps.c.
There should be no user visible change after this commit.
Commit b60cea7 (Make target_wait options use enum flags) broke
deprecated_target_wait_hook usage: there's a commit comment telling
this hook has not been converted.
Rather than trying to mend it, this patch replaces the hook by two
target_wait observers:
target_pre_wait (ptid_t ptid)
target_post_wait (ptid_t event_ptid)
Upon target_wait entry, target_pre_wait is notified with the ptid
passed to target_wait. Upon exit, target_post_wait is notified with
the event ptid returned by target_wait. Should an exception occur,
event_ptid is null_ptid.
This change benefits to Insight (out-of-tree): there's no real use of the
late hook in gdb itself.
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
Inferior continuations are no longer used by the until and finish
command. It is used only by the attach command and the remote target
upon detecting new inferiors. Update the comment accordingly.
Also update another comment about non-existent thread continuations and
remove an unused #include.
gdb/ChangeLog:
2021-04-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* continuations.h: Update the general comment.
* inferior.h (class inferior) <continuations>: Update the comment.
* interps.c: Do not include "continuations.h".
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
Calls through interpreter_exec_cmd can cause the output state to be modified in
a way which doesn't get back after the execution.
It looks like the intent is that interp::resume should put things back how they
should be, however, mi_interp::resume modifies gdb_stdout and nothing currently
restores it to the previous state.
To see the broken behaviour:
gdb -ex starti -ex bt -ex 'interpreter-exec mi echo' -ex bt -ex q echo <<<''
Prior to this patch, on a terminal environment, the first backtrace is
coloured, and the second backtrace is not. The reason is that
stdio_file::can_emit_style_escape becomes false, because the gdb_stdout gets
overwritten in mi_interp::resume and not replaced.
gdb/ChangeLog:
* interps.c (interpreter_exec_cmd): Restore streams pointers.
gdb/testsuite/ChangeLog:
* gdb.base/style-interp-exec-mi.exp: New.
* gdb.base/style-interp-exec-mi.c: New.
Signed-off-by: Peter Waller <p@pwaller.net>
Change-Id: Id87423b262d058857ea9dca5866ca6471741e512
