* cp-valprint.c, c-valprint.c, infcall.c: Use value_contents or
value_contents_writeable, include note that there are problems.
* breakpoint.c, infcall.c: Use VALUE_LVAL.
argument of val_print.
* cp-valprint.c (cp_print_value): Don't add the offset parameter
to the address argument of baseclass_offset or target_read_memory.
Do add it to the argument of cp_print_value_fields.
* c-valprint.c (c_val_print): Pass a proper valaddr to
cp_print_class_method.
* valops.c (search_struct_method): If there is only one method
and args is NULL, return that method.
Abstract out operations specific to particular C++ ABI's, and
invoke them through a function table. This removes the C++ ABI
dependencies scattered throughout the code, and allows us to
cleanly add support for new C++ ABI's.
* cp-abi.h, cp-abi.h, gnu-v2-abi.c, hpacc-abi.c: New files.
* c-typeprint.c, c-valprint.c, dbxread.c, eval.c, gdbtypes.c,
jv-typeprint.c, linespec.c, symtab.c, typeprint.c, valops.c:
#include "cp-abi.h". These files all use functions now declared
there.
* symtab.h (OPNAME_PREFIX_P, VTBL_PREFIX_P, DESTRUCTOR_PREFIX_P):
Deleted. These services are now provided by functions declared in
cp-abi.h.
* value.h (value_rtti_type, value_virtual_fn_field): Same.
* values.c (value_virtual_fn_field): Same, for this definition.
* valops.c (value_rtti_type): Same.
* c-typeprint.c (c_type_print_base): Use the functions from
"cp-abi.h", instead of the old macros, or hard-coded ABI-specific
tests.
* dbxread.c (record_minimal_symbol): Same.
* gdbtypes.c (get_destructor_fn_field, virtual_base_index,
virtual_base_index_skip_primaries): Same.
* jv-typeprint.c (java_type_print_base): Same.
* linespec.c (find_methods, decode_line_1): Same.
* symtab.c (gdb_mangle_name): Same.
* Makefile.in (SFILES): Add the new .c files mentioned above.
(cp_abi_h): New variable.
(COMMON_OBS): Add gnu-v2-abi.o, hpacc-abi.o, and cp-abi.o.
(cp-abi.o, gnu-v2-abi.o, hpacc-abi.o): New targets.
(c-typeprint.o, c-valprint.o, dbxread.o, eval.o, gdbtypes.o,
jv-typeprint.o, symtab.o, linespec.o, typeprint.o, valops.o): Add
dependency on $(cp_abi_h).
to automatically dereference a function pointer for printing
if necessary.
(c_val_print): Use print_function_pointer_address when printing
function pointer addresses.
functions which architectures can redefine, defaulting to
generic_pointer_to_address and generic_address_to_pointer.
* findvar.c (extract_typed_address, store_typed_address,
generic_pointer_to_address, generic_address_to_pointer): New
functions.
(POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default
definitions.
(extract_address, store_address): Doc fixes.
* values.c (value_as_pointer): Doc fix.
(value_from_pointer): New function.
* defs.h (extract_typed_address, store_typed_address): New
declarations.
* inferior.h (generic_address_to_pointer,
generic_pointer_to_address): New declarations.
* value.h (value_from_pointer): New declaration.
* ax-gdb.c (const_var_ref): Use value_from_pointer, not
value_from_longest.
* blockframe.c (generic_push_dummy_frame): Use read_pc and
read_sp, not read_register.
* c-valprint.c (c_val_print): Use extract_typed_address instead of
extract_address to extract vtable entries and references.
* cp-valprint.c (cp_print_value_fields): Use value_from_pointer
instead of value_from_longest to extract the vtable's address.
* eval.c (evaluate_subexp_standard): Use value_from_pointer
instead of value_from_longest to compute `this', and for doing
pointer-to-member dereferencing.
* findvar.c (read_register): Use extract_unsigned_integer, not
extract_address.
(read_var_value): Use store_typed_address instead of store_address
for building label values.
(locate_var_value): Use value_from_pointer instead of
value_from_longest.
* hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer,
instead of value_from_longest, to build arguments to __d_shl_get.
* printcmd.c (set_next_address): Use value_from_pointer, not
value_from_longest.
(x_command): Use value_from_pointer, not value_from_longest.
* tracepoint.c (set_traceframe_context): Use value_from_pointer,
not value_from_longest.
* valarith.c (value_add, value_sub): Use value_from_pointer, not
value_from_longest.
* valops.c (find_function_in_inferior, value_coerce_array,
value_coerce_function, value_addr, hand_function_call): Same.
* value.h (COERCE_REF): Use unpack_pointer, not unpack_long.
* values.c (unpack_long): Use extract_typed_address to produce
addresses from pointers and references, not extract_address.
(value_from_longest): Use store_typed_address instead of
store_address to produce pointer and reference values.
* bcache.h, bcache.c, c-valprint.c, coffread.c, stabsread.c,
stack.c, valprint.c: Change variables to unsigned.
* bcache.c: Rearrange to avoid warnings about variables not being set.
* c-lang.c, ch-lang.c, f-lang.c, m2-lang.c: Include valprint.h
rather than declaring print_max and repeat_count_threashold
ourselves (incorrectly).
* valprint.h: Do declare repeat_count_threashold.
* ch-exp.c: Use default case for internal error.
* findvar.c: Don't omit argument type.
* symtab.c: Remove unused variable.
the address of the virtual function.
From Peter Bloecher (Peter.Bloecher@eedn.ericsson.se).
* eval.c (evaluate_subexp_standard), valarith.c (value_x_unop):
Handle C++ operator *.
with 0 length. A sticky tag caused this fix from
revision 2.32 date: 1996/04/29 23:25:27; author: dawn;
state: Exp; lines: +1 -0 branches: 2.32.34;
to not make it into devo.
ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
and CONFIG_OBS.
* configure configure.in: Clean up test cases around thread support.
start-sanitize-v850
* configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
host is Windows.
end-sanitize-v850
* c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
printcmd.c valops.c value.h values.c: Add bfd_section arg to
value_at and value_at_lazy.
* coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
Add bfd_section arg to prim_record_minimal_symbol_and_info.
* corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
instead of read_memory. It takes a bfd_section arg.
* coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
unnecessary cast for assignment of struct dbx_symfile_info.
Struct objfile now uses a real pointer instead of PTR for this
element.
* dbxread.c (dbx_symfile_init): Stash bfd section pointers for
text, data and bss into dbx_symfile_info.
* exec.c (xfer_memory): Handle transfers for user-specified
sections.
* findvar.c (read_var_value locate_var_value): Copy bfd section
from the symbol to the value.
* gdb-stabs.h: Add section pointers for text, data and bss
sections.
* maint.c (translate address command): Add test code for overlay
address translation.
* printcmd.c (do_examine do_one_display): Now takes a bfd section
arg.
* (print_formatted x_command): Record current section along with
current address for repeated commands.
* sparc-nat.c (fetch_inferior_registers): Change
target_xfer_memory to target_{read write}_memory to allow changes
to target_xfer_memory interface for section info.
* symmisc.c (dump_msymbols print_symbol): Print section
assocaited with symbol.
* symtab.c (fixup_symbol_section): New routine to
add section info to symbols returned by lookup_symbol.
* symtab.h (struct general_symbol_info): Add bfd section to
symbols.
* target.c target.h (target_xfer_memory): Add bfd section to
args.
* (target_read_memory_section): New routine to read data from a
specific section.
* (target_memory_bfd_section): New global variable to pass bfd
section in to targets.
* valarith.c (value_add value_addr value_array): Preserve bfd
section when computing new value.
* value.h (struct value): Add bfd section to values.
* values.c (allocate_value value_copy): Initialize/preserve bfd
section.
* (unpack_double): Clean up _MSC_VER conditionals to remove
duplicate code.
start-sanitize-v850
* v850ice.c: New module to support communication with NEC's
PC-based ICE.
* config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
ep names with rxx names. sp and fp are renamed via a different
mechanism.
end-sanitize-v850
if we encounter a positive stack adjustment.
(find_proc_desc): If heuristic_fence_post is non-zero, use
heuristic_proc_start to determine the start of a function before
calling heuristic_proc_desc.
* coffread.c (coff_symtab_read): Change minimal symbol types
for C_LABEL symbols from mst_* to mst_file_*.
* config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
* configure.in: Handle error message from sun3 native ld when
configuring HLDFLAGS.
* configure: Regenerated with autoconf.
* c-valprint.c (c_value_print): Adjust value address by VALUE_OFFSET.
* cp-valprint.c (cp_print_value): Prevent gdb crashes by making sure
that the virtual base pointer from an user object still points to
accessible memory.
* dbxread.c (dbx_symfile_init): Initialize sym_stab_info to
clear the recently added header_files fields.
(dbx_symfile_finish): Free hfiles[i].vector to avoid storage leak.
