Apparently some distros have a nagging egrep that helpfully tells you
egrep is deprecated and to use "grep -E". The nag message causes a ld
testsuite failure. What's more the advice isn't that good. The "-E"
flag may not be available with older versions of grep.
This patch fixes bare invocation of egrep within binutils, replacing
it with the autoconf $EGREP or with grep.
config/
* lib-ld.m4 (AC_LIB_PROG_LD_GNU): Require AC_PROG_EGREP and
invoke $EGREP.
(AC_LIB_PROG_LD): Likewise.
binutils/
* configure: Regenerate.
* embedspu.sh: Replace egrep with grep.
gold/
* testsuite/Makefile.am (flagstest_compress_debug_sections.check):
Replace egrep with grep.
* testsuite/Makefile.in: Regenerate.
* testsuite/bnd_ifunc_1.sh: Replace egrep with $EGREP.
* testsuite/bnd_ifunc_2.sh: Likewise.
* testsuite/bnd_plt_1.sh: Likewise.
* testsuite/discard_locals_test.sh: Likewise.
* testsuite/gnu_property_test.sh: Likewise.
* testsuite/no_version_test.sh: Likewise.
* testsuite/pr18689.sh: Likewise.
* testsuite/pr26936.sh: Likewise.
* testsuite/retain.sh: Likewise.
* testsuite/split_i386.sh: Likewise.
* testsuite/split_s390.sh: Likewise.
* testsuite/split_x32.sh: Likewise.
* testsuite/split_x86_64.sh: Likewise.
* testsuite/ver_test_pr16504.sh: Likewise.
intl/
* configure: Regenerate.
ld/
* testsuite/ld-elfvers/vers.exp (test_ar): Replace egrep with grep.
A couple of files changed on my latest --enable-maintainer-mode
build. ld/Makefile.in had a missing dependency but better sorting of
the loongson entries.
intl/
* configure: Regenerate.
ld/
* Makefile.am: Sort loongson entries.
* Makefile.in: Regenerate.
As discussed previously, a.out support is now quite deprecated, and in
some cases removed, in both Binutils itself and NetBSD, so this legacy
default makes little sense. `netbsdelf*` and `netbsdaout*` still work
allowing the user to be explicit about there choice. Additionally, the
configure script warns about the change as Nick Clifton requested.
One possible concern was the status of NetBSD on NS32K, where only a.out
was supported. But per [1] NetBSD has removed support, and if it were to
come back, it would be with ELF. The binutils implementation is
therefore marked obsolete, per the instructions in the last message.
With that patch and this one applied, I have confirmed the following:
--target=i686-unknown-netbsd
--target=i686-unknown-netbsdelf
builds completely
--target=i686-unknown-netbsdaout
properly fails because target is deprecated.
--target=vax-unknown-netbsdaout builds completely except for gas, where
the target is deprecated.
[1]: https://mail-index.netbsd.org/tech-toolchain/2021/07/19/msg004025.html
---
bfd/config.bfd | 43 +++++++++++++--------
bfd/configure.ac | 5 +--
binutils/testsuite/binutils-all/nm.exp | 2 +-
binutils/testsuite/lib/binutils-common.exp | 7 +---
config/picflag.m4 | 4 +-
gas/configure.tgt | 9 +++--
gas/testsuite/gas/arm/blx-bl-convert.d | 2 +-
gas/testsuite/gas/arm/blx-local-thumb.d | 2 +-
gas/testsuite/gas/sh/basic.exp | 2 +-
gdb/configure.host | 34 +++++++----------
gdb/configure.tgt | 2 +-
gdb/testsuite/gdb.asm/asm-source.exp | 6 +--
intl/configure | 2 +-
ld/configure.tgt | 44 +++++++++++-----------
ld/testsuite/ld-arm/arm-elf.exp | 4 +-
ld/testsuite/ld-elf/elf.exp | 2 +-
ld/testsuite/ld-elf/shared.exp | 4 +-
libiberty/configure | 4 +-
This allows binutils to build with musl gettext rather than falling
back to the bundled version.
[0] https://git.savannah.gnu.org/gitweb/?p=gettext.git;a=commit;h=b67399b4
2021-06-13 Michael Forney <mforney@mforney.org>
config/ChangeLog:
* gettext.m4 (AM_GNU_GETTEXT): Skip checks for the internal
symbols _nl_msg_cat_cntr, _nl_domain_bindings, and
_nl_expand_alias, if __GNU_GETTEXT_SUPPORTED_REVISION is defined.
Backport of gettext serial 68 patch.
intl/ChangeLog:
* configure: Regenerate.
---
Thi
This variable currently refers directly, not to a .la file, but to an .a
file. This produces wrong results when building into a library on some
platforms: so convert it to the general form "-L${top_builddir}../intl
-lintl ..." ... so that both libtool and non-libtool builds will always
do the right thing for both static and shared links.
intl/ChangeLog
2021-02-04 Nick Alcock <nick.alcock@oracle.com>
* configure.ac (LIBINTL): Transform into -L/-lintl form.
* configure: Regenerate.
libintl is included in several shared libraries (at least
libinproctrace.so and libctf.so): unconditionally picify with code
borrowed from libiberty configure. (It's not performance-critical, so
don't bother making separate PIC and non-PIC libraries like libiberty
does.)
intl/ChangeLog
2021-02-02 Nick Alcock <nick.alcock@oracle.com>
* aclocal.m4: include picflag.m4.
* configure.ac (PICFLAG): Add and substitute.
* Makefile.in (PICFLAG): New.
(COMPILE): Use it.
* configure: Regenerate.
As Iain reported, my change broke the case when one has bison >= 3,
but make decides there is no reason to regenerate plural.c, unfortunately
that seems to be a scenario I haven't tested. The problem is that
the pregenerated plural.c has been generated with bison 1.35, but when
config.h says HAVE_BISON3, the code assumes it is the bison3 variant.
What used to work fine is when one has bison >= 3 and plural.c has been
regenerated (e.g. do touch intl/plural.y and it will work), or when
one doesn't have any bison (then nothing is regenerated, but HAVE_BISON3
isn't defined either), or when one has bison < 3 and doesn't need to
regenerate, or when one has bison < 3 and it is regenerated.
The following patch fixes this, by killing the HAVE_BISON3 macro from
config.h, and instead remembering the fact whether plural.c has been created
with bison < 3 or bison >= 3 in a separate new plural-config.h header.
The way this works:
- user doesn't have bison
- user has bison >= 3, but intl/{plural-config.h,plural.c} aren't older than intl/plural.y
- user has bison < 3, but intl/{plural-config.h,plural.c} aren't older than intl/plural.y
pregenerated !USE_BISON3 plural.c and plural-config.h from source
dir is used, nothing in the objdir
- user has bison >= 3 and intl/plural.y is newer
Makefile generates plural.c and USE_BISON3 plural-config.h in the
objdir, which is then used in preference to srcdir copies
- user has bison < 3 and intl/plural.y is newer
Makefile generates plural.c and !USE_BISON3 plural-config.h in the
objdir, which is then used in preference to srcdir copies
I have tested all these cases and make all-yes worked in all the cases.
If one uses the unsupported ./configure where srcdir == objdir, I guess
(though haven't tested) that it should still work, just it would be nice
if such people didn't try to check in the plural{.c,-config.h} they have
regenerated.
What doesn't work, but didn't work before either (just tested gcc-9 branch
too) is when one doesn't have bison and plural.y is newer than plural.c.
Don't do that ;)
intl/ChangeLog
2020-04-16 Jakub Jelinek <jakub@redhat.com>
PR bootstrap/92008
* configure.ac: Remove HAVE_BISON3 AC_DEFINE.
* Makefile.in (HEADERS): Add plural-config.h.
(.y.c): Also create plural-config.h.
(dcigettext.o loadmsgcat.o plural.o plural-exp.o): Also depend
on plural-config.h.
(plural-config.h): Depend on plural.c.
* plural-exp.h: Include plural-config.h. Use USE_BISON3 instead
of HAVE_BISON3.
* plural.y: Use USE_BISON3 instead of HAVE_BISON3.
* configure: Regenerated.
* plural.c: Regenerated.
* config.h.in: Regenerated.
* plural-config.h: Generated.
bison 3 apparently made a backwards incompatible change, dropped
YYLEX_PARAM/YYPARSE_PARAM support and instead needs %param or %lex-param
and %parse-param. Furthermore, there is no easy way to conditionalize
on bison version in the *.y files.
While e.g. glibc bumped bison requirement and just has the bison 3
compatible version, Richi said there are still systems with older bison
where we want to build gcc.
So, this patch instead determines during configure bison version, and
depending on that when building plural.c (if building it at all) tweaks
what is passed over to bison if needed.
Tested with both bison 3 and bison 1.35, in each case with reconfiguring
intl and building with make all-yes (as in my setup intl isn't normally
used).
intl/ChangeLog
2020-04-16 Jakub Jelinek <jakub@redhat.com>
PR bootstrap/92008
* configure.ac: Add check for bison >= 3, AC_DEFINE HAVE_BISON3
and AC_SUBST BISON3_YES and BISON3_NO.
* Makefile.in (.y.c): Prefix $(YACC) invocation with @BISON3_NO@,
add @BISON3_YES@ prefixed rule to adjust the *.y source using sed
and adjust output afterwards.
* plural-exp.h (PLURAL_PARSE): If HAVE_BISON3 is defined, use
struct parse_args * type for arg instead of void *.
* plural.y: Add magic /* BISON3 ... */ comments with bison >= 3
directives.
(YYLEX_PARAM, YYPARSE_PARAM): Don't define if HAVE_BISON3 is defined.
(yylex, yyerror): Adjust prototypes and definitions if HAVE_BISON3
is defined.
* plural.c: Regenerated.
* config.h.in: Regenerated.
* configure: Regenerated.
GCC's config/ChangeLog since the last time this merge was done
(in the binutils-gdb commit 0b4d000cc4) is included at the
end of this commit message.
It is worth noting that the binutils-gdb commit 301a9420d9
added the file config/debuginfod.m4 which is not present in GCC's
config/ directory. This file is preserved, unmodified, after this
commit.
In order to regenerate all of the configure files, I configured with
--enable-maintainer-mode, and built the 'all' target. I then did the
same thing on a source tree without this patch, and only committed
those files that changed when this patch was added.
GCC's config/ChangeLog entries:
2020-02-12 Sandra Loosemore <sandra@codesourcery.com>
PR libstdc++/79193
PR libstdc++/88999
* no-executables.m4: Use a non-empty program to test for linker
support.
2020-02-01 Andrew Burgess <andrew.burgess@embecosm.com>
* lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Update shell syntax.
2020-01-27 Andrew Burgess <andrew.burgess@embecosm.com>
* lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Add new
--with-libXXX-type=... option. Use this to guide the selection of
either a shared library or a static library.
2020-01-24 Maciej W. Rozycki <macro@wdc.com>
* toolexeclibdir.m4: New file.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
* futex.m4: Handle *-uclinux*.
* tls.m4 (GCC_CHECK_TLS): Likewise.
2019-09-06 Florian Weimer <fweimer@redhat.com>
* futex.m4 (GCC_LINUX_FUTEX): Include <unistd.h> for the syscall
function.
2019-07-08 Richard Sandiford <richard.sandiford@arm.com>
* bootstrap-Og.mk: New file.
2019-06-25 Kwok Cheung Yeung <kcy@codesourcery.com>
Andrew Stubbs <ams@codesourcery.com>
* gthr.m4 (GCC_AC_THREAD_HEADER): Add case for gcn.
2019-05-30 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* ax_count_cpus.m4: New file.
2019-05-02 Richard Biener <rguenther@suse.de>
PR bootstrap/85574
* bootstrap-lto.mk (extra-compare): Set to gcc/lto1$(exeext).
2019-04-16 Martin Liska <mliska@suse.cz>
* bootstrap-lto-lean.mk: Filter out -flto in STAGEtrain_CFLAGS.
2019-04-09 Martin Liska <mliska@suse.cz>
* bootstrap-lto-lean.mk: New file.
2019-03-02 Johannes Pfau <johannespfau@gmail.com>
* mh-mingw: Also set __USE_MINGW_ACCESS flag for C++ code.
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* math.m4, tls.m4: Use AC_LANG_SOURCE.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
config/ChangeLog:
* ax_count_cpus.m4: New file, backported from GCC.
* bootstrap-Og.mk: New file, backported from GCC.
* bootstrap-lto-lean.mk: New file, backported from GCC.
* bootstrap-lto.mk: Changes backported from GCC.
* futex.m4: Changes backported from GCC.
* gthr.m4: Changes backported from GCC.
* lib-link.m4: Changes backported from GCC.
* mh-mingw: Changes backported from GCC.
* no-executables.m4: Changes backported from GCC.
* tls.m4: Changes backported from GCC.
* toolexeclibdir.m4: New file, backported from GCC.
binutils/ChangeLog:
* configure: Regenerate.
gdb/ChangeLog:
* configure: Regenerate.
gdbserver/ChangeLog:
* configure: Regenerate.
gdbsupport/ChangeLog:
* configure: Regenerate.
intl/ChangeLog:
* configure: Regenerate.
libiberty/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog.bin-gdb:
* configure: Regenerate.
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
If binutils is going to use ngettext, then we'd better arrange for
intl/ to be compiled if the system gettext lacks ngettext.
* configure.ac: Invole AM_GNU_GETTEXT with need_ngettext.
* configure: Regenerate.
* aclocal.m4: Regenerate.
