static globals for dealing with binary transmissions.
(remote_write_bytes): Add support for binary downloads
by shadowing the "M" packet with a new "X" packet. This
defaults to ON; if the stub does not understand this, it
will fall back to using "M".
(putpkt): Add support for binary downloading.
* monitor.c (monitor_expect): The mon2000 monitor
on the MSA2000 will also emit random DC1/DC3 chars.
* m32r-stub.c: Change all char's to unsigned char's
to support binary downloading.
(handle_exception): Add support for binary downloading
via a new "X" packet.
(getpacket): Do NOT strip eighth bit of incoming chars.
Watch out for escaped characters in the incoming stream.
(putpacket): Do NOT strip eighth bit of incoming chars.
(bin2mem): New function to write binary data directly to
memory.
* m32r-rom.c: Add new "mon2000" target.
* hp-psymtab-read.c (hpread_build_psymtabs): Coerce first arg
passed to make_cleanup to the correct type.
(hpread_quick_traverse): Change fifth arg to call to
hpread_end_psymtab to be 0.
Compare CURR_MODULE_END to 0 rather than NULL.
Get rid of ifdef'ed out code.
(scan_procs): Get rid of ifdef'ed out code.
* somread.c (som_symfile_read): Coerce first argument passed to
make_cleanup to the correct type.
* hp-psymtab-read.c (do_pxdb): New function. Check whether the
file needs to be processed by pxdb (an HP debug info massaging
tool), if so call it.
(hpread_build_psymtabs): Initialize scan_start to 0 and
simplify flow of control.
* somread.c (som_symfile_read): Add call to do_pxdb (),
in hp-psymtab-read.c.
* symfile.c (symbol_file_add): Remove ifdef'ed out HPUX specific
code.
(symfile_bfd_open): Remove HPUXHPPA ifdef'ed code. Code is now
in hp-psymtab-read.c.
* i386-stub.c, m32r-stub.c, m68k-stub.c, sh-stub.c, sparc-stub.c,
sparcl-stub, sparclet-stub.c: Change declaration of putDebugChar
to include explicit void return type as per documentation. Fix up
occasions where stubs erroneously checked return type.
Changes from Keith Seitz <keiths@cygnus.com>
* valops.c (value_assign): Add calls to register_changed_hook and
memory_changed_hook to inform UIs that the user has changed
the target's registers/memory.
* findvar.c (write_register_gen): Remove call to pc_changed_hook.
* defs.h: Remove declaration for pc_changed_hook and
add declarations for register_changed_hook and
memory_changed_hook.
* top.c: Ditto.
v850_register_names, v850_processor_type_table): Declare tables
and structures for handling differences in register names for
v850 and v850e.
(struct reg_list): Define new structure for creating tables
of register bit masks in v850e instrutions.
(handle_prepare, handle_pushm): New helpers for v850_scan_prologue.
(v850_scan_prologue): Recognize v850e instructions: callt, prepare,
and pushm.
(v850_target_architecture_hook): New function to set register
names based on current machine.
(_initialize_v850_tdep): Set up target_architecture_hook.
* config/v850/tm-v850.h (v850_register_names): Declare.
(REGISTER_NAME): Define to refer to v850_register_names.
(SR0_REGNUM, CTBP_REGNUM): Define.
(PS_REGNUM): Redefine in terms of SR0_REGNUM.
* Makefile.in (c-exp.tab.c): use BISON instead of YACC, to pick
the correct value from configure output.
(jv-exp.tab.c): ditto.
(f-exp.tab.c): ditto.
(m2-exp.tab.c): ditto.
* breakpoint.h (ep_is_exception_catchpoint): Add prototype.
* frame.h (select_and_print_frame): Add prototype.
* stack.c (func_command): Call select_and_print_frame with correct
number of arguments. Reformat whitespace.
As far as I can tell, the func command (only enabled in --dbx mode) doesn't
actually work right now, even with this rather glaring fix. I'm not going
to spend time on it; dbx mode looks pretty seriously broken after a five
second glance.
* top.c (init_main): Fix tipo in description of the remotetimeout
variable.
* breakpoint.c (bpstat_stop_status): Handle systems where
DECR_PC_AFTER_BREAK != DECR_PC_AFTER_HW_BREAK.
init only nonzero fields, leave to_require_attach and
to_require_detach empty, not needed for /proc systems yet.
(_initialize_procfs): Call init_procfs_ops.
* h8300-tdep.c (original_register_names, h8300h_register_names,
h8300_register_names): Define new variables.
(set_register_names): New function to set register names based on
current CPU type.
(h8300_command, h8300h_command, h8300s_command): Call
set_register_names.
* config/h8300/tm-h8300.h (h8300_register_names): Declare.
(REGISTER_NAME): Define to refer to h8300_register_names.
(init_dummy_target): New function, fills in dummy_target.
(initialize_targets): Use it.
* hpux-thread.c (hpux_thread_ops): Don't initialize statically.
(init_hpux_thread_ops): New function, fills in hpux_thread_ops.
(_initialize_hpux_thread): Use it.
* m3-nat.c (m3_ops): Don't initialize statically.
(init_m3_ops): New function, fills in m3_ops.
(_initialize_m3): Use it.
* infrun.c (set/show scheduler-locking) New command. Set a
mode bit that will control how GDB attempts to control thread
scheduling for step, continue, etc. (resume): make use of
the schedule-locking mode.
* target.h (struct target_ops): new field to_has_thread_control.
* sol-thread.c: initialize target_ops to_has_thread_control.
* procfs.c: ditto.
* target.c: ditto.
* m3-nat.c: ditto.
* remote.c: ditto.
* hpux-thread.c: ditto.
to conform to standards, fix spelling errors.
(ishex, stubhex, record_currthread, etc): Declare.
(ishex, stubhex): Declare char arg as int.
(pack_string): Comment out, never used but possibly useful.
(threadref_to_int, remote_get_threadinfo, etc): Make static.
called from wait_for_inferior. Instead, if a new thread-id is
detected, call add_thread. (MAGIC_NULL_PID): new macro, use
instead of the magic number "42000". (remote_find_new_threads):
if inferior_pid is unknown, get and use the current thread id.
(remote_start_remote): on connecting, attempt to get the current
thread id for inferior_pid. (remote_resume): If pid == -1,
then resume any-thread (not the current thread specifically).
* thread.c (info_threads_command): don't initialize current_pid
until after call to FIND_NEW_THREADS (which may change inferior_pid).
* utils.c: <readline/readline.h> instead of "readline/readline.h".
* configure.in (TERM_LIB): Search for the appropriate term library
on the host system.
* configure: Regenerated.
* Makefile.in (TERMCAP): Set based on autoconf check.
* config/*/*.mh: Don't override TERMCAP setting.
than $(READLINE_SRC) so #include <readline/readline.h> will work.
* top.c: #include <readline/history.h> instead of "history.h".
* tracepoint.c: Likewise.
* mac-xdep.c: Likewise.
* blockframe.c (get_frame_saved_regs): If the saved_regs_addr ptr
is null, ensure that saved registers are copied from the local
variable that was used to obtain them.
* remote-rdp.c (rdp_init): Don't discard first character on reset.
(translate_open_mode): Define table.
(exec_swi): Handle SWI_Clock. SWI_Open now handles stdin/stdout.
SWI_Write returns number of bytes not written. SWI_Read does the
same. SWI_Seek should return success/failure flag. Fix SWI_Flen.
A patch from PR 15841 for the RDP (Demon) interface.
a printable representation.
(monitor_error): Call error after converting string into printable
format.
(monitor_printf{,_noecho}): If EXTRA_RDEBUG is defined, convert string
into printable form before printing.
(monitor_expect): Ditto.
(monitor_read_memory{,_single}): Call monitor_error, not error.
(monitor_read_memory): Return immediately if length is 0.
* ppcbug-rom.c (init_ppc_cmds): Fill in dump_registers field, which is
now required.
Re-do TARGET_PRINT_INSN_INFO, TARGET_PRINT_INSN, TARGET_ARCHITECTURE,
TARGET_ARCHITECTURE_AUTO, TARGET_BYTE_ORDER_SELECTABLE_P,
TARGET_BYTE_ORDER so that they can all be overriden.
Document.
Convert mn10300 and PPC targets.
Add two pointers (saved_regs, extra_info) to struct frame_info.
Introduce new macro FRAME_INIT_SAVED_REGS which replaces
FRAME_FIND_SAVED_REGS.
Document.
Use in mn10300 and rs6000 targets. Fix side effects on ALPHA, MIPS,
Z8K and SPARC targets.
* configure.in (with-sim-gpu2): Do not emit a -L argument without
an associated pathname. Link in the math library after the gpu2
library.
Assumes that libm is around (and doesn't take advantage of the
AC_CHECK_LIB(m) that is already in configure.in), but this is a
minor point and unlikely to cause problems.
* config/xm-aix4.h (SIGWINCH_HANDLER): Function `aix_resize_window'
must accept a signal number as parameter.
* config/rs6000/xm-rs6000.h (SIGWINCH_HANDLER): Ditto.
* utils.c (initialize_utils): Give a parameter to `SIGWINCH_HANDLER'.
* inferior.h (register_valid): Variable's type is `SIGNED char', not
`char'.
* findvar.c (register_valid): Ditto.
* defs.h (make_cleanup_func): Protect parameter list by `PARAMS'.
* gdbthread.h (unbind_target_thread_vector): Likewise.
Merged in m68k-linux patch from Andreas Schwab
1998-12-01 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
* Makefile.in, configure.host, configure.tgt: Add support for
m68k-linux.
* config/m68k/linux.mh: New file.
* config/m68k/linux.mt: New file.
* config/m68k/nm-linux.h: New file.
* config/m68k/tm-linux.h: New file.
* config/m68k/xm-linux.h: New file.
* gdb/m68klinux-nat.c: New file.
* gdbserver/low-linux.c: Add support for m68k-linux.
* gdb/config/m68k/tm-m68k.h (NUM_FREGS): New macro.
* config/m68k/tm-m68k.h (NUM_FREGS): m68k-linux patch.
Added NUM_FREGS macro.
* config/m68k/xm-linux.h: m68k-linux patch. New file.
* config/m68k/tm-linux.h: m68k-linux patch. New file.
* config/m68k/nm-linux.h: m68k-linux patch. New file.
* config/m68k/linux.mt: m68k-linux patch. New file.
* config/m68k/linux.mh: m68k-linux patch. New file.
* gdbserver/low-linux.c: m68k-linux patch. Added an ifdef
that checks the value of __GLIBC to decide whether or
not to include sys/reg.h.
* m68klinux-nat.c: m68k-linux patch. New file. Note
both m68k-tdep.c and m68klinux-nat.c contain definitions
for supply_gregset and supply_fpregset. The definitions
in m68k-tdep.c are valid is USE_PROC_FS is defined. Otherwise,
the definitions in m68klinux-nat.c will be used. This is a
bit of a hack. The supply_* routines do not belong in
*_tdep.c files. But, there are several lynx ports that currently
depend on these definitions.
* configure.tgt: m68k-linux patch. Added m68*-*-linux*
gdb_target.
* configure.host: m68k-linux patch. Added m68*-*-linux*
gdb_host.
* Makefile.in: m68k-linux patch. Added compile line for
m68klinux-nat.o
* config/i386/xm-cygwin.h: Remove REQUEST_QUIT definition.
* config/powerpc/xm-cygwin.h: Ditto.
PR 17664.
With this define in place, you can't type "q" to get out of GDB's pager
under Cygwin.
* monitor.c (monitor_read_memory): Zero out pattern buffers
before calling re_search.
(parse_register_dump): Ditto.
PR 18049. This bug had existed erratically since I upgraded to
the new gnu-regex.c this last summer. The problem is mostly in
parse_register_dump; the allocated structure has some random values
in it and there is a flag set in the register_pattern structure by the
gnu-regex library which indicates that the values in the re_registers
should be trusted.
If those arbitrary contents aren't zero, gnu-regex tries to run realloc
on them and we get a core dump on some hosts for some targets when the
moon is just right.
* m32r-tdep.c (decode_prologue): If no branch or push fp is found,
but there's a stack adjust, then use that as the end of prologue.
(m32r_skip_prologue): don't skip past the first line if there is
line info. (m32r_virtual_frame_pointer): new function.
(m32r_fix_call_dummy): no return value needed.
* tracepoint.c: Move default definition of
TARGET_VIRTUAL_FRAME_POINTER from here to target.h.
* target.h: Add default definition of TARGET_VIRTUAL_FRAME_POINTER.
* ax-gdb.c (gen_frame_args_address, gen_frame_locals_address):
use TARGET_VIRTUAL_FRAME_POINTER to determine frame pointer.
(gen_trace_for_expr): new argument, address of tracepoint,
gets passed to new_agent_expr and added to struct agent_expr.
(is_nontrivial_conversion): call to new_agent_expr now requires
a dummy argument. (agent_command): use get_current_frame() to
get current PC scope; pass it to gen_trace_for_expr.
* ax-general.c (new_agent_expr): new argument, address of
tracepoint; store it in new field of struct agent_expr.
* ax.h (struct agent_expr): add new field for tracepoint address.
* ax-gdb.h: change prototypes to match above changes.
Convert mn10300, MIPS and powerpc/rs6000 targets to use
BREAKPOINT_FROM_PC
Delete global variable memory_breakpoint_size. Use BREAKPOINT_FROM_PC
instead.
* symfile.c (deduce_language_from_filename): rewrite so as to
work from a table of filename extensions, modifiable by the user.
(filename_language_table): new data structure.
(set_ext_lang_command): new function for new command, "set
extension-language". (info_extension_language_command): new
function for new command "info extension-languages".
(add_filename_language, init_filename_language_table): new
support functions for the above.
* language.c (language_enum): new function. Support for above.
* coffread.c (coff_symtab_read): Discard C_LABEL's that are not
function entry points, to avoid getting them in the stack dump
instead of the actual function.
without NAT_FILE definition, configure will assume that GDB cannot
run native.
* config/m68k/nm-delta68.h (KERNEL_U_SIZE): New macro.
* delta68-nat.c (kernel_u_size): New function.
* rdi-share/host.h: if compiling under Cygwin, make sure new
preprocessor define is defined. Define it if not.
* rdi-share/hostchan.h: ditto
* rdi-share/aclocal.m4: regenerate
* rdi-share/configure: regenerate
* rdi-share/host.h: if compiling under Cygwin, make sure new
preprocessor define is defined. Define it if not.
* rdi-share/aclocal.m4: regenerate
* rdi-share/configure: regenerate
Changes to account for name change from cygwin32 to cygwin and
clean up Win32-related ifdefs.
* configure.tgt: check for cygwin* instead of cygwin32.
New cygwin gdb_target variable loses the "32".
* configure.host: check for cygwin* instead of cygwin32.
New cygwin gdb_host variable loses the "32".
* configure.in: test __CYGWIN__ instead of __CYGWIN32__,
rename gdb_cv_os_cygwin32 variable to drop the "32". Call
AM_EXEEXT instead of AC_EXEEXT since that isn't in a released
autoconf yet.
* configure: regenerate.
* main.c: drop "32" from cygwin_ funcs, include sys/cygwin.h
where
cygwin path conv protos live, instead of adding a proto here
for
them here.
* {main.c, ser-tcp.c, ser-unix.c, top.c}: check __CYGWIN__
instead of __CYGWIN32__.
* source.c: thoughout, check _WIN32 instead of WIN32.
* config/i386/cygwin32.mh: delete.
* config/i386/cygwin.mh: new file, was cygwin32.mh.
* config/i386/cygwin32.mt: delete.
* config/i386/cygwin.mt: new file, was cygwin32.mt.
* config/i386/tm-cygwin32.h: delete.
* config/i386/tm-cygwin.h: new file, was tm-cygwin32.h.
* config/i386/xm-cygwin32.h: delete.
* config/i386/xm-cygwin.h: new file, was xm-cygwin32.h.
* config/i386/xm-windows.h: #include xm-cygwin.h now.
* config/powerpc/cygwin32.mh: delete.
* config/powerpc/cygwin.mh: new file, was cygwin32.mh.
* config/powerpc/cygwin32.mt: delete.
* config/powerpc/cygwin.mt: new file, was cygwin32.mt.
* config/powerpc/tm-cygwin32.h: delete.
* config/powerpc/tm-cygwin.h: new file, was tm-cygwin32.h.
* config/powerpc/xm-cygwin32.h: delete.
* config/powerpc/xm-cygwin.h: new file, was xm-cygwin32.h.
* rdi-share/aclocal.m4: regenerate with aclocal.
* rdi-share/configure: regenerate with autoconf.
* rdi-share/{host.h, hostchan.c, hostchan.h, serdrv.c,
* serpardr.c,
unixcomm.c}: check __CYGWIN__ instead of __CYGWIN32__.
multithread debugging.
(remote_get_threadlist) : get a partial list of threads
(remote_threadlist_iterator) : Step through all the threads
(init_remote_threadtests) : Optional builtin unit test commands.
* thread.c (bind_target_thread_vector) : Implementa a more dynamic
way of accessing target specific thread info functions than
FIND_NEW_THREADS.
(target_thread_info) : Function to get extended thread information.
* gdbthread.h : Export internal data structures corresponding to
external detailed thread info response. This is more like a 'ps'
command than what might be expected of host based threads. This
is for embedded systems.
which define CRLF_SOURCE_FILES.
* win32-nat.c: 1) Add thread support, 2) fix ability to attach to
a running process, and 3) implement limited support for cygwin
signals.
(thread_rec): New function.
(child_add_thread): Ditto.
(child_init_thread_list): Ditto.
(child_delete_thread): Ditto.
(do_child_fetch_inferior_registers): Ditto.
(do_child_store_inferior_registers): Ditto.
(handle_output_debug_string): Ditto.
(child_fetch_inferior_registers): Use do_* function to perform
operation.
(child_store_inferior_registers): Ditto.
(child_continue): Ditto.
(child_thread_alive): Ditto.
(cygwin_pid_to_str): Ditto.
(handle_load_dll): Reorganize, add first attempt at reading
dll names from attached processes. Change info messages to provide
more information when dll is already loaded.
(handle_exception): Changes mandated by new thread-aware structures.
(child_wait): Track thread creation/destruction. Handle cygwin
signals.
(child_create_inferior): Ditto.
(child_resume): Ditto.
(child_kill_inferior): Ditto. Close child process handle to avoid a
handle leak.
(child_ops): Fill out child_ops fields that deal with threads.
* config/i386/tm-cygwin32.h: Declare function and macro needed
for converting a cygwin "pid" to a string.
* config/i386/xm-cygwin32.h: define HAVE_SIGSETMASK as 0 since
sigsetmask is not defined in cygwin.
[Support for trace debugging: registers that were not collected.]
* remote.c (remote_fetch_registers): accept 'xxxx' in the register
packet, with the meaning "register value is not available".
Set register_valid to -1, which will connote "no value available".
* findvar.c (read_relative_register_raw_bytes): return failure if
register_valid == -1. (value_of_register): return failure if
register_valid == -1. (read_var_value): return error if
value_of_register fails for a register variable.
(value_from_register): return failure if register_valid == -1.
* eval.c (evaluate_subexp_standard): return error if
value_of_register fails for a register used in an expression.
* infcmd.c (do_registers_info): display "value not available"
for registers for which register_valid == -1.
* tracepoint.c (set_raw_tracepoint): just save the filename as is
from the symbol table, rather than trying to prepend the dir name.
Also save the bfd section. (tracepoints_info): use the section
when looking up the function name.
* tracepoint.h: add section field to tracepoint struct.
* patch approved by shebs
Wed Oct 28 12:33:52 EST 1998 Frank Ch. Eigler <fche@cygnus.com>
* configure.in: Accept both -skyb- and -sky- for
--with-sim-funit/gpu2 options.
* configure: Rebuilt.
* command.c copying.c copying.awk core-aout.c core-regset.c
corelow.c dcache.c i386-tdep.c i386v4-nat.c i387-tdep.c
infcmd.c infptrace.c infrun.c remote.c solib.c symfile.c
symmisc.c valarith.c: Add prototypes.
* defs.h: Add prototype for utils.c::do_run_cleanups.
* gdbtypes.c: Add prototypes.
(make_pointer_type): Add braces to remove nested if-else ambiguity.
(make_reference_type): Ditto.
* printcmd.c (printf_command): Initialize 'f' and 'string' at
function startup to suppress possibly-used-before-initialized warning.
* remote-utils.c: Add prototypes.
(sr_pollchar): Add braces to remove nested if-else ambiguity.
* ser-tcp.c: Add prototypes.
(wait_for): Add braces to remove nested if-else ambiguity.
(tcp_readchar): Ditto.
* ser-unix.c: Add prototypes.
(get_tty_state): Don't define errno here.
(get_tty_state): Don't define errno here.
(hardwire_readchar): Only define 't' if we are compiling in a Cygwin
environment.
* symtab.c: Add prototypes.
(find_methods): Add braces to remove nested if-else ambiguity.
(search_symbols): Set 'i' to an initial value to suppress a
possibly-used-before-initialized warning.
* valops.c: Add prototypes.
(value_cast): Set 'eltype2' to an initial value to suppress a
possibly-used-before-initialized warning.
(value_of_variable): Add braces to remove nested if-else ambiguity.
(value_of_this): Ditto.
* valprint.c: Add prototypes.
(print_floating): Add braces to remove nested if-else ambiguity.
Looks like a big change, but it is really just a lot of small stuff.
In the cases where GCC was flagging a possible use-before-initialized
warning on variables, it turned out that these were being used properly
but GCC couldn't see that.
"wait.h" was defining all WIF* macro's instead of filling in those
that <wait.h> missed. Stops heaps of warnings from <wait.h>
re-defining WIF*s defined in "wait.h".
version didn't work for sol2.6; pushed it to autoconf.
* configure.in (gdb_cv_proc_service_is_old): new test.
* acconfig.h (PROC_SERVICE_IS_OLD): new define.
* configure, config.in: regenerate.
* blockframe.c (find_pc_sect_partial_function): Add braces to avoid
possible nested-if confusion.
* breakpoint.c (breakpoint_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
* gnu-regex.c: Define _REGEX_RE_COMP only if it isn't already defined.
* gnu-regex.h: Define _REGEX_RE_COMP to pick up old compatability
prototypes.
* symtab.h: Add prototype for _initialize_source.
* value.h: Add prototype for _initialize_value.
* defs.h: Include sys/types.h or stddef.h to get size_t.
(make_cleanup): Add make_cleanup_func typedef and switch to using
a prototype for this function.
(mfree): Add prototypes for mmalloc, mrealloc, mfree if we aren't
using mmalloc.
* ax-gdb.c breakpoint.c coffread.c corelow.c dbxread.c dwarf2read.c
dwarfread.c elfread.c eval.c exec.c gdbtk-cmds.c gdbtk.c infcmd.c
infrun.c mipsread.c nlmread.c os9kread.c parse.c printcmd.c symfile.c
symmisc.c symtab.c thread.c top.c tracepoint.c typeprint.c valops.c:
Cast parameters passed to make_cleanup to use the new
make_cleanup_func typedef.
More warning cleanups. There are still a bunch of places where the first
argument to make_cleanup is not cast to (make_cleanup_func); these are
either due to the function fitting the make_cleanup_func specification
already (e.g. free()) or they are in files that weren't compiled when
I did my make on a Linux native system. Bwahahaha. You can see them
like this:
grep make_cleanup\ * | grep -v make_cleanup_func
I'll surely go back and clean up the remaining suspicious calls in
GDB one of these days. :-)
* configure.in: Check for sys/debugreg.h, asm/debugreg.h.
* i386v-nat.c: Include asm/debugreg.h, sys/debugreg.h if it is not
present.
This is to work around a conflict where the Linux 2.1.x kernel and glibc
2.0.x are not in sync; including <sys/debugreg.h> will result in an error.
With luck, these losers will get their act together and we can trash
this hack in the near future.
address range of a compilation unit without children.
* mdebugread.c (parse_partial_symbols): Fix handling of stabs
continuations, use xmalloc and xrealloc.
There should be sufficient information/hooks now to eliminate
this hack.
* exec.c (file_command): Add a new hook here to inform ui's
when the exec file has changed. Adding it here allows the
ui to be informed after symbol reading.
* gdbcore.h: Add declaration of file_changed_hook.
* stabsread.c (rs6000_builtin_type): Create a complex float instead
of an error.
(read_sun_floating_type): Similarly.
(read_range_type): Create a complex float if self_subrange is
true.
(remote_interrupt_twice): Remove. remote_stop now handles it.
(remote_stop): New function which handles interrupting the
remote target so that CLUI and GUI use the same core functions
to achieve the same goal.
(remote_wait): Change to handle remote_stop properly.
[interrupted_already]: New static global to help remote_stop.
[remote_ops, extended_remote_ops]: Add remote_stop for to_stop member.
* target.c: Rename static function "ignore" to "target_ignore" and
export it so that gdb can determin if some target vector member is
actually not defined. Replace all occurances of ignore.
* target.h: Export target_ignore.
Thu Oct 1 15:39:27 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
* breakpoint.c (bpstat_stop_status): Do not consider an
untripped watchpoint as a "hit".
* rdi-share/unixcomm.c: If using cygwin32, also use the SERPORT and
PARPORT defines for win32.
(Unix_MatchValidSerialDevice): For cygwin32, valid serial port names
start with "com", not "/dev/tty".
(Unix_OpenSerial): Do not use O_NONBLOCK on cygwin32.
* rdi-share/devsw.c (DevSW_Close): Free the device's state (SwitcherState)
so that the device may be reopened.
* remote-rdi.c (mywritec): Send all output through gdb's *_unfiltered
functions, ignoring non-ASCII chars, so that non-tty UI's can snarf
the output from fputs_hook.
(mywrite): Ditto.
(arm_rdi_open): Set inferior_pid.
(arm_rdi_detach): Pop the target off the target stack so that
users can attach and detach multiple times.
(arm_rdi_close): Close the opened device and reset inferior_pid, too.
