29 Commits

Author	SHA1	Message	Date
Joel Brobecker	61baf725ec	update copyright year range in GDB files ... This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.	2017-01-01 10:52:34 +04:00
Simon Marchi	112e8700a6	Class-ify ui_out ... This patch finalizes the C++ conversion of the ui-out subsystem, by turning the ui_out and ui_out_impl structures into a single class hierarchy. ui_out functions are turned into virtual methods of that new class, so as a result there are a lot of call sites to update. In the previous version of the patchset, there were separate ui_out and ui_out_impl classes, but it wasn't really useful and added boilerplate. In this version there is simply an ui_out base class that is extended for CLI, TUI and MI. It's a bit hard to maintain a ChangeLog for such a big patch, I did my best but I'm sure there are some missing or outdated info in there... gdb/ChangeLog: * ui-out.h (ui_out_begin, ui_out_end, ui_out_table_header, ui_out_table_body, ui_out_field_int, ui_out_field_fmt_int, ui_out_field_core_addr, ui_out_field_string, ui_out_field_stream, ui_out_field_fmt, ui_out_field_skip, ui_out_spaces, ui_out_text, ui_out_message, ui_out_wrap_hint, ui_out_flush, ui_out_test_flags, ui_out_query_field, ui_out_is_mi_like_p, ui_out_redirect): Remove, replace with a method in class ui_out. (table_begin_ftype): Remove, replace with pure virtual method in class ui_out. (table_body_ftype): Likewise. (table_end_ftype): Likewise. (table_header_ftype): Likewise. (ui_out_begin_ftype): Likewise. (ui_out_end_ftype): Likewise. (field_int_ftype): Likewise. (field_skip_ftype): Likewise. (field_string_ftype): Likewise. (field_fmt_ftype): Likewise. (spaces_ftype): Likewise. (text_ftype): Likewise. (message_ftype): Likewise. (wrap_hint_ftype): Likewise. (flush_ftype): Likewise. (redirect_ftype): Likewise. (data_destroy_ftype): Likewise. (struct ui_out_impl): Remove, replace with class ui_out. (ui_out_new): Remove. (class ui_out): New class. * ui-out.c (struct ui_out): Remove, replaced with class ui_out. (current_level): Remove, replace with ui_out method. (push_level): Likewise. (pop_level): Likewise. (uo_table_begin, uo_table_body, uo_table_end, uo_table_header, uo_begin, uo_end, uo_field_int, uo_field_skip, uo_field_fmt, uo_spaces, uo_text, uo_message, uo_wrap_hint, uo_flush, uo_redirect, uo_field_string): Remove. (ui_out_table_begin): Replace with ... (ui_out::table_begin): ... this. (ui_out_table_body): Replace with ... (ui_out::table_body): ... this. (ui_out_table_end): Replace with ... (ui_out::table_end): ... this. (ui_out_table_header): Replace with ... (ui_out::table_header): ... this. (ui_out_begin): Replace with ... (ui_out::begin): ... this. (ui_out_end): Replace with ... (ui_out::end): ... this. (ui_out_field_int): Replace with ... (ui_out::field_int): ... this. (ui_out_field_fmt_int): Replace with ... (ui_out::field_fmt_int): ... this. (ui_out_field_core_addr): Replace with ... (ui_out::field_core_addr): ... this. (ui_out_field_stream): Replace with ... (ui_out::field_stream): ... this. (ui_out_field_skip): Replace with ... (ui_out::field_skip): ... this. (ui_out_field_string): Replace with ... (ui_out::field_string): ... this. (ui_out_field_fmt): Replace with ... (ui_out::field_fmt): ... this. (ui_out_spaces): Replace with ... (ui_out::spaces): ... this. (ui_out_text): Replace with ... (ui_out::text): ... this. (ui_out_message): Replace with ... (ui_out::message): ... this. (ui_out_wrap_hint): Replace with ... (ui_out::wrap_hint): ... this. (ui_out_flush): Replace with ... (ui_out::flush): ... this. (ui_out_redirect): Replace with ... (ui_out::redirect): ... this. (ui_out_test_flags): Replace with ... (ui_out::test_flags): ... this. (ui_out_is_mi_like_p): Replace with ... (ui_out::is_mi_like_p): ... this. (verify_field): Replace with ... (ui_out::verify_field): ... this. (ui_out_query_field): Replace with ... (ui_out::query_table_field): ... this. (ui_out_data): Remove. (ui_out_new): Remove, replace with ... (ui_out::ui_out): ... this constructor. (do_cleanup_table_end, make_cleanup_ui_out_tuple_begin_end, do_cleanup_end, make_cleanup_ui_out_tuple_begin_end, make_cleanup_ui_out_list_begin_end): Update fallouts of struct ui_out -> class ui_out change. * cli-out.c (cli_out_data): Remove. (cli_uiout_dtor): Remove. (cli_table_begin): Replace with ... (cli_ui_out::do_table_begin): ... this new method. (cli_table_body): Replace with ... (cli_ui_out::do_table_body): ... this new method. (cli_table_end): Replace with ... (cli_ui_out::do_table_end): ... this new method. (cli_table_header): Replace with ... (cli_ui_out::do_table_header): ... this new method. (cli_begin): Replace with ... (cli_ui_out::do_begin): ... this new method. (cli_end): Replace with ... (cli_ui_out::do_end): ... this new method. (cli_field_int): Replace with ... (cli_ui_out::do_field_int): ... this new method. (cli_field_skip): Replace with ... (cli_ui_out::do_field_skip): ... this new method. (cli_field_string): Replace with ... (cli_ui_out::do_field_string): ... this new method. (cli_field_fmt): Replace with ... (cli_ui_out::do_field_fmt): ... this new method. (cli_spaces): Replace with ... (cli_ui_out::do_spaces): ... this new method. (cli_text): Replace with ... (cli_ui_out::do_text): ... this new method. (cli_message): Replace with ... (cli_ui_out::do_message): ... this new method. (cli_wrap_hint): Replace with ... (cli_ui_out::do_wrap_hint): ... this new method. (cli_flush): Replace with ... (cli_ui_out::do_flush): ... this new method. (cli_redirect): Replace with ... (cli_ui_out::do_redirect): ... this new method. (out_field_fmt): Replace with ... (cli_ui_out::out_field_fmt): ... this new method. (field_separator): Replace with ... (cli_ui_out::field_separator): ... this new method. (cli_out_set_stream): Replace with ... (cli_ui_out::set_stream): ... this new method. (cli_ui_out_impl): Remove. (cli_out_data_ctor): Remove. (cli_ui_out_impl::cli_ui_out_impl): New constructor. (cli_ui_out_impl::~cli_ui_out_impl): New destructor. (cli_out_new): Change return type to cli_ui_out *, instantiate a cli_ui_out. * cli-out.h (cli_ui_out_data): Remove, replace with class cli_ui_out. (class cli_ui_out): New class. (cli_ui_out_impl): Remove. (cli_out_data_ctor): Remove. (cli_out_new): Change return type to cli_ui_out*. (cli_out_set_stream): Remove. * cli/cli-interp.c (struct cli_interp) <cli_uiout>: Change type to cli_ui_out*. (cli_interpreter_resume): Adapt. (cli_interpreter_exec): Adapt. * mi/mi-out.c (mi_ui_out_data, mi_out_data): Remove. (mi_ui_out_impl): Remove. (mi_table_begin): Replace with ... (mi_ui_out::do_table_begin): ... this. (mi_table_body): Replace with ... (mi_ui_out::do_table_body): ... this. (mi_table_end): Replace with ... (mi_ui_out::do_table_end): ... this. (mi_table_header): Replace with ... (mi_ui_out::do_table_header): ... this. (mi_begin): Replace with ... (mi_ui_out::do_begin): ... this. (mi_end): Replace with ... (mi_ui_out::do_end): ... this. (mi_field_int): Replace with ... (mi_ui_out::do_field_int): ... this. (mi_field_skip): Replace with ... (mi_ui_out::do_field_skip): ... this. (mi_field_string): Replace with ... (mi_ui_out::do_field_string): ... this. (mi_field_fmt): Replace with ... (mi_ui_out::do_field_fmt): ... this. (mi_spaces): Replace with ... (mi_ui_out::do_spaces): ... this. (mi_text): Replace with ... (mi_ui_out::do_text): ... this. (mi_message): Replace with ... (mi_ui_out::do_message): ... this. (mi_wrap_hint): Replace with ... (mi_ui_out::do_wrap_hint): ... this. (mi_flush): Replace with ... (mi_ui_out::do_flush): ... this. (mi_redirect): Replace with ... (mi_ui_out::do_redirect): (field_separator): Replace with ... (mi_ui_out::field_separator): (mi_open): Replace with ... (mi_ui_out::open): ... this. (mi_close): Replace with ... (mi_ui_out::close): ... this. (mi_out_rewind): Replace with ... (mi_ui_out::rewind): ... this. (mi_out_put): Replace with ... (mi_ui_out::put): ... this. (mi_version): Replace with ... (mi_ui_out::version): ... this. (mi_out_data_ctor): Replace with ... (mi_ui_out::mi_ui_out): ... this. (mi_out_data_dtor): Replace with ... (mi_ui_out::~mi_ui_out): ... this. (mi_out_new): Change return type to mi_ui_out*, instantiate an mi_ui_out object. (as_mi_ui_out): New function. (mi_version): Update fallouts of struct ui_out to class ui_out transition. (mi_out_put): Likewise. (mi_out_rewind): Likewise. * mi/mi-out.h (mi_out_new): Change return type to mi_ui_out*. * tui/tui-out.c (tui_ui_out_data, tui_out_data, tui_ui_out_impl): Remove. (tui_field_int): Replace with ... (tui_ui_out::do_field_int): ... this. (tui_field_string): Replace with ... (tui_ui_out::do_field_string): ... this. (tui_field_fmt): Replace with ... (tui_ui_out::do_field_fmt): ... this. (tui_text): Replace with ... (tui_ui_out::do_text): ... this. (tui_out_new): Change return type to tui_ui_out*, instantiate tui_ui_out object. (tui_ui_out::tui_ui_out): New. * tui/tui-out.h: New file. * tui/tui.h (tui_out_new): Move declaration to tui/tui-out.h. * tui/tui-io.c: Include tui/tui-out.h. (tui_old_uiout): Change type to cli_ui_out*. (tui_setup_io): Use dynamic_cast. * tui/tui-io.h (tui_old_uiout): Change type to cli_ui_out*. * tui/tui-interp.c (tui_resume): Adapt. * ada-lang.c (print_it_exception): Update fallouts of struct ui_out to class ui_out transition. (print_one_exception): Likewise. (print_mention_exception): Likewise. * ada-tasks.c (print_ada_task_info): Likewise. (info_task): Likewise. (task_command): Likewise. * auto-load.c (print_script): Likewise. (auto_load_info_scripts): Likewise. (info_auto_load_cmd): Likewise. * break-catch-sig.c (signal_catchpoint_print_one): Likewise. * break-catch-syscall.c (print_it_catch_syscall): Likewise. (print_one_catch_syscall): Likewise. * break-catch-throw.c (print_it_exception_catchpoint): Likewise. (print_one_exception_catchpoint): Likewise. (print_one_detail_exception_catchpoint): Likewise. (print_mention_exception_catchpoint): Likewise. * breakpoint.c (maybe_print_thread_hit_breakpoint): Likewise. (print_solib_event): Likewise. (watchpoint_check): Likewise. (wrap_indent_at_field): Likewise. (print_breakpoint_location): Likewise. (output_thread_groups): Likewise. (print_one_breakpoint_location): Likewise. (breakpoint_1): Likewise. (default_collect_info): Likewise. (watchpoints_info): Likewise. (print_it_catch_fork): Likewise. (print_one_catch_fork): Likewise. (print_it_catch_vfork): Likewise. (print_one_catch_vfork): Likewise. (print_it_catch_solib): Likewise. (print_one_catch_solib): Likewise. (print_it_catch_exec): Likewise. (print_one_catch_exec): Likewise. (mention): Likewise. (print_it_ranged_breakpoint): Likewise. (print_one_ranged_breakpoint): Likewise. (print_one_detail_ranged_breakpoint): Likewise. (print_mention_ranged_breakpoint): Likewise. (print_it_watchpoint): Likewise. (print_mention_watchpoint): Likewise. (print_it_masked_watchpoint): Likewise. (print_one_detail_masked_watchpoint): Likewise. (print_mention_masked_watchpoint): Likewise. (bkpt_print_it): Likewise. (tracepoint_print_one_detail): Likewise. (tracepoint_print_mention): Likewise. (update_static_tracepoint): Likewise. (tracepoints_info): Likewise. (save_breakpoints): Likewise. * cli/cli-cmds.c (complete_command): Likewise. * cli/cli-logging.c (set_logging_redirect): Likewise. (pop_output_files): Likewise. (handle_redirections): Likewise. * cli/cli-script.c (print_command_lines): Likewise. * cli/cli-setshow.c (do_show_command): Likewise. (cmd_show_list): Likewise. * cp-abi.c (list_cp_abis): Likewise. (show_cp_abi_cmd): Likewise. * darwin-nat-info.c (darwin_debug_regions_recurse): Likewise. * disasm.c (gdb_pretty_print_insn): Likewise. (do_mixed_source_and_assembly_deprecated): Likewise. (do_mixed_source_and_assembly): Likewise. * gdb_bfd.c (print_one_bfd): Likewise. (maintenance_info_bfds): Likewise. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise. * guile/scm-ports.c (ioscm_with_output_to_port_worker): Likewise. * i386-linux-tdep.c (i386_linux_handle_segmentation_fault): Likewise. * i386-tdep.c (i386_mpx_print_bounds): Likewise. * infcmd.c (run_command_1): Likewise. (print_return_value_1): Likewise. * inferior.c (print_selected_inferior): Likewise. (print_inferior): Likewise. * infrun.c (print_end_stepping_range_reason): Likewise. (print_signal_exited_reason): Likewise. (print_exited_reason): Likewise. (print_signal_received_reason): Likewise. (print_no_history_reason): Likewise. * interps.c (interp_set): Likewise. * linespec.c (decode_line_full): Likewise. * linux-thread-db.c (info_auto_load_libthread_db): Likewise. * mi/mi-cmd-env.c (mi_cmd_env_pwd): Likewise. (mi_cmd_env_path): Likewise. (mi_cmd_env_dir): Likewise. (mi_cmd_inferior_tty_show): Likewise. * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Likewise. (print_partial_file_name): Likewise. (mi_cmd_file_list_exec_source_files): Likewise. * mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions): Likewise. (mi_cmd_info_gdb_mi_command): Likewise. * mi/mi-cmd-stack.c (mi_cmd_stack_info_depth): Likewise. (mi_cmd_stack_list_args): Likewise. (list_arg_or_local): Likewise. * mi/mi-cmd-var.c (print_varobj): Likewise. (mi_cmd_var_create): Likewise. (mi_cmd_var_delete): Likewise. (mi_cmd_var_set_format): Likewise. (mi_cmd_var_show_format): Likewise. (mi_cmd_var_info_num_children): Likewise. (mi_cmd_var_list_children): Likewise. (mi_cmd_var_info_type): Likewise. (mi_cmd_var_info_path_expression): Likewise. (mi_cmd_var_info_expression): Likewise. (mi_cmd_var_show_attributes): Likewise. (mi_cmd_var_evaluate_expression): Likewise. (mi_cmd_var_assign): Likewise. (varobj_update_one): Likewise. * mi/mi-interp.c (as_mi_interp): Likewise. (mi_on_normal_stop_1): Likewise. (mi_tsv_modified): Likewise. (mi_breakpoint_created): Likewise. (mi_breakpoint_modified): Likewise. (mi_solib_loaded): Likewise. (mi_solib_unloaded): Likewise. (mi_command_param_changed): Likewise. (mi_memory_changed): Likewise. (mi_user_selected_context_changed): Likewise. * mi/mi-main.c (print_one_inferior): Likewise. (output_cores): Likewise. (list_available_thread_groups): Likewise. (mi_cmd_data_list_register_names): Likewise. (mi_cmd_data_list_changed_registers): Likewise. (output_register): Likewise. (mi_cmd_data_evaluate_expression): Likewise. (mi_cmd_data_read_memory): Likewise. (mi_cmd_data_read_memory_bytes): Likewise. (mi_cmd_list_features): Likewise. (mi_cmd_list_target_features): Likewise. (mi_cmd_add_inferior): Likewise. (mi_execute_command): Likewise. (mi_load_progress): Likewise. (print_variable_or_computed): Likewise. (mi_cmd_trace_frame_collected): Likewise. * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Likewise. * osdata.c (info_osdata_command): Likewise. * probe.c (gen_ui_out_table_header_info): Likewise. (print_ui_out_not_applicables): Likewise. (print_ui_out_info): Likewise. (info_probes_for_ops): Likewise. (enable_probes_command): Likewise. (disable_probes_command): Likewise. * progspace.c (print_program_space): Likewise. * python/py-breakpoint.c (bppy_get_commands): Likewise. * python/py-framefilter.c (py_print_type): Likewise. (py_print_value): Likewise. (py_print_single_arg): Likewise. (enumerate_args): Likewise. (enumerate_locals): Likewise. (py_print_args): Likewise. (py_print_frame): Likewise. * record-btrace.c (btrace_ui_out_decode_error): Likewise. (btrace_call_history_insn_range): Likewise. (btrace_call_history_src_line): Likewise. (btrace_call_history): Likewise. * remote.c (show_remote_cmd): Likewise. * skip.c (skip_info): Likewise. * solib.c (info_sharedlibrary_command): Likewise. * source.c (print_source_lines_base): Likewise. * spu-tdep.c (info_spu_event_command): Likewise. (info_spu_signal_command): Likewise. (info_spu_mailbox_list): Likewise. (info_spu_dma_cmdlist): Likewise. (info_spu_dma_command): Likewise. (info_spu_proxydma_command): Likewise. * stack.c (print_stack_frame): Likewise. (print_frame_arg): Likewise. (read_frame_arg): Likewise. (print_frame_args): Likewise. (print_frame_info): Likewise. (print_frame): Likewise. * symfile.c (load_progress): Likewise. (generic_load): Likewise. (print_transfer_performance): Likewise. * thread.c (do_captured_list_thread_ids): Likewise. (print_thread_info_1): Likewise. (restore_selected_frame): Likewise. (do_captured_thread_select): Likewise. (print_selected_thread_frame): Likewise. * top.c (execute_command_to_string): Likewise. * tracepoint.c (tvariables_info_1): Likewise. (trace_status_mi): Likewise. (tfind_1): Likewise. (print_one_static_tracepoint_marker): Likewise. (info_static_tracepoint_markers_command): Likewise. * utils.c (do_ui_out_redirect_pop): Likewise. (fputs_maybe_filtered): Likewise.	2016-12-22 16:19:42 -05:00
Pedro Alves	b22e99fdaf	gdb::{unique_ptr,move} -> std::{unique_ptr,move} ... Now that we require C++11, use std::unique_ptr and std::move directly. gdb/ChangeLog: 2016-11-15 Pedro Alves <palves@redhat.com> * ada-lang.c (create_excep_cond_exprs): Use std::move instead of gdb::move. * break-catch-throw.c (handle_gnu_v3_exceptions): Use std::unique_ptr instead of gdb::unique_ptr. * breakpoint.c (watch_command_1): Use std::move instead of gdb::move. * cli/cli-dump.c (dump_memory_to_file, restore_binary_file): Use std::unique_ptr instead of gdb::unique_ptr. * dtrace-probe.c (dtrace_process_dof_probe): Use std::move instead of gdb::move. * elfread.c (elf_read_minimal_symbols): Use std::unique_ptr instead of gdb::unique_ptr. * mi/mi-main.c (mi_cmd_data_read_memory): Use std::unique_ptr instead of gdb::unique_ptr. * parse.c (parse_expression_for_completion): Use std::move instead of gdb::move. * printcmd.c (display_command): std::move instead of gdb::move.	2016-11-15 19:54:21 +00:00
Pedro Alves	2f408ecb92	Use ui_file_as_string throughout more ... This replaces most of the remaining ui_file_xstrdup calls with ui_file_as_string calls. Whenever a call was replaced, that led to a cascade of other necessary adjustments throughout, to make the code use std::string instead of raw pointers. And then whenever I added a std::string as member of a struct, I needed to adjust allocation/destruction of said struct to use new/delete instead of xmalloc/xfree. The stopping point was once gdb built again. These doesn't seem to be a way to reasonably split this out further. Maybe-not-obvious changes: - demangle_for_lookup returns a cleanup today. To get rid of that, and avoid unnecessary string dupping/copying, this introduces a demangle_result_storage type that the caller instantiates and passes to demangle_for_lookup. - Many methods returned a "char *" to indicate that the caller owns the memory and must free it. Those are switched to return a std::string instead. Methods that return a "view" into some internal string return a "const char *" instead. I.e., we only copy/allocate when necessary. gdb/ChangeLog: 2016-11-08 Pedro Alves <palves@redhat.com> * ada-lang.c (ada_name_for_lookup, type_as_string): Use and return std::string. (type_as_string_and_cleanup): Delete. (ada_lookup_struct_elt_type): Use type_as_string. * ada-lang.h (ada_name_for_lookup): Now returns std::string. * ada-varobj.c (ada_varobj_scalar_image): Return a std::string. (ada_varobj_describe_child): Make 'child_name' and 'child_path_expr' parameters std::string pointers. (ada_varobj_describe_struct_child, ada_varobj_describe_ptr_child): Likewise, and use string_printf. (ada_varobj_describe_simple_array_child) (ada_varobj_describe_child): Likewise. (ada_varobj_get_name_of_child, ada_varobj_get_path_expr_of_child) (ada_varobj_get_value_image) (ada_varobj_get_value_of_array_variable) (ada_varobj_get_value_of_variable, ada_name_of_variable) (ada_name_of_child, ada_path_expr_of_child) (ada_value_of_variable): Now returns std::string. Use string_printf. (ada_value_of_child): Adjust. * break-catch-throw.c (check_status_exception_catchpoint): Adjust to use std::string. * breakpoint.c (watch_command_1): Adjust to use std::string. * c-lang.c (c_get_string): Adjust to use std::string. * c-typeprint.c (print_name_maybe_canonical): Use std::string. * c-varobj.c (varobj_is_anonymous_child): Use ==/!= std::string operators. (c_name_of_variable): Now returns a std::string. (c_describe_child): The 'cname' and 'cfull_expression' output parameters are now std::string pointers. Adjust. (c_name_of_child, c_path_expr_of_child, c_value_of_variable) (cplus_number_of_children): Adjust to use std::string and string_printf. (cplus_name_of_variable): Now returns a std::string. (cplus_describe_child): The 'cname' and 'cfull_expression' output parameters are now std::string pointers. Adjust. (cplus_name_of_child, cplus_path_expr_of_child) (cplus_value_of_variable): Now returns a std::string. * cp-abi.c (cplus_typename_from_type_info): Return std::string. * cp-abi.h (cplus_typename_from_type_info): Return std::string. (struct cp_abi_ops) <get_typename_from_type_info>: Return std::string. * cp-support.c (inspect_type): Use std::string. (cp_canonicalize_string_full, cp_canonicalize_string_no_typedefs) (cp_canonicalize_string): Return std::string and adjust. * cp-support.h (cp_canonicalize_string) (cp_canonicalize_string_no_typedefs, cp_canonicalize_string_full): Return std::string. * dbxread.c (read_dbx_symtab): Use std::string. * dwarf2read.c (dwarf2_canonicalize_name): Adjust to use std::string. * gdbcmd.h (lookup_struct_elt_type): Adjust to use std::string. * gnu-v3-abi.c (gnuv3_get_typeid): Use std::string. (gnuv3_get_typename_from_type_info): Return a std::string and adjust. (gnuv3_get_type_from_type_info): Adjust to use std::string. * guile/guile.c (gdbscm_execute_gdb_command): Adjust to use std::string. * infcmd.c (print_return_value_1): Adjust to use std::string. * linespec.c (find_linespec_symbols): Adjust to demangle_for_lookup API change. Use std::string. * mi/mi-cmd-var.c (print_varobj, mi_cmd_var_set_format) (mi_cmd_var_info_type, mi_cmd_var_info_path_expression) (mi_cmd_var_info_expression, mi_cmd_var_evaluate_expression) (mi_cmd_var_assign, varobj_update_one): Adjust to use std::string. * minsyms.c (lookup_minimal_symbol): Use std::string. * python/py-varobj.c (py_varobj_iter_next): Use new instead of XNEW. vitem->name is a std::string now, adjust. * rust-exp.y (convert_ast_to_type, convert_name): Adjust to use std::string. * stabsread.c (define_symbol): Adjust to use std::string. * symtab.c (demangle_for_lookup): Now returns 'const char *'. Add a demangle_result_storage parameter. Use it for storage. (lookup_symbol_in_language) (lookup_symbol_in_objfile_from_linkage_name): Adjust to new demangle_for_lookup API. * symtab.h (struct demangle_result_storage): New type. (demangle_for_lookup): Now returns 'const char *'. Add a demangle_result_storage parameter. * typeprint.c (type_to_string): Return std::string and use ui_file_as_string. * value.h (type_to_string): Change return type to std::string. * varobj-iter.h (struct varobj_item) <name>: Now a std::string. (varobj_iter_delete): Use delete instead of xfree. * varobj.c (create_child): Return std::string instead of char * in output parameter. (name_of_variable, name_of_child, my_value_of_variable): Return std::string instead of char *. (varobj_create, varobj_get_handle): Constify 'objname' parameter. Adjust to std::string fields. (varobj_get_objname): Return a const char * instead of a char *. (varobj_get_expression): Return a std::string. (varobj_list_children): Adjust to use std::string. (varobj_get_type): Return a std::string. (varobj_get_path_expr): Return a const char * instead of a char *. Adjust to std::string fields. (varobj_get_formatted_value, varobj_get_value): Return a std::string. (varobj_set_value): Change type of 'expression' parameter to std::string. Use std::string. (install_new_value): Use std::string. (delete_variable_1): Adjust to use std::string. (create_child): Change the 'name' parameter to a std::string reference. Swap it into the new item's name. (create_child_with_value): Swap item's name into the new child's name. Use string_printf. (new_variable): Use new instead of XNEW. (free_variable): Don't xfree fields that are now std::string. (name_of_variable, name_of_child): Now returns std::string. (value_of_root): Adjust to use std::string. (my_value_of_variable, varobj_value_get_print_value): Return and use std::string. (varobj_value_get_print_value): Adjust to use ui_file_as_string and std::string. * varobj.h (struct varobj) <name, path_expr, obj_name, print_value>: Now std::string's. <name_of_variable, name_of_child, path_expr_of_child, value_of_variable>: Return std::string. (varobj_create, varobj_get_handle): Constify 'objname' parameter. (varobj_get_objname): Return a const char * instead of a char *. (varobj_get_expression, varobj_get_type): Return a std::string. (varobj_get_path_expr): Return a const char * instead of a char *. (varobj_get_formatted_value, varobj_get_value): Return a std::string. (varobj_set_value): Constify 'expression' parameter. (varobj_value_get_print_value): Return a std::string.	2016-11-08 15:26:47 +00:00
Pedro Alves	4d01a485d2	'struct expression *' -> gdb::unique_xmalloc_ptr<expression> ... This patch makes parse_expression and friends return a unique_ptr instead of raw pointer [1]: typedef gdb::unique_malloc_ptr<expression> expression_up; and then adjusts the codebase throughout to stop using cleanups to manage lifetime of expression pointers. Whenever I found a structure owning an expression pointer, I made it store a unique_ptr instead of a raw pointer, which then requires using new/delete of the holding structure, instead of XNEW/xfree. [1] - I'd like to set the rule that types named with an "_up" suffix are unique_ptr typedefs. Note I used gdb::unique_xmalloc_ptr instead of gdb::unique_ptr, simply because we still use xmalloc instead of new to allocate expression objects. Once that's changed, all we need to do is change the expression_up typedef and the smart pointer will then call delete instead of xfree. gdb/ChangeLog: 2016-11-08 Pedro Alves <palves@redhat.com> * ada-lang.c (ada_read_renaming_var_value): Use expression_up. (struct ada_catchpoint_location) <excep_cond_expr>: Now an expression_up. (ada_catchpoint_location_dtor): Reset excep_cond_expr instead of using xfree. (create_excep_cond_exprs): Use expression_up and gdb::move. (allocate_location_exception): Use new instead of XNEW. (should_stop_exception): Likewise. Adjust to use expression_up. (create_ada_exception_catchpoint): Use new instead of XNEW. * ax-gdb.c (agent_eval_command_one): Use expression_up instead of cleanups. (maint_agent_printf_command): Use expression_up. * break-catch-sig.c (create_signal_catchpoint): Use new instead of XNEW. * break-catch-syscall.c (create_syscall_event_catchpoint): Likewise. * break-catch-throw.c (handle_gnu_v3_exceptions): Use new instead of XCNEW. Use gdb::unique_ptr instead of cleanups. * breakpoint.c (set_breakpoint_condition, update_watchpoint) (parse_cmd_to_aexpr, watchpoint_check) (bpstat_check_breakpoint_conditions, watchpoint_locations_match): Adjust to use expression_up. (init_bp_location): Adjust. (free_bp_location): Use delete instead of xfree. (set_raw_breakpoint_without_location, set_raw_breakpoint) (add_solib_catchpoint, create_fork_vfork_event_catchpoint) (new_single_step_breakpoint, create_breakpoint_sal): Use new instead of XNEW. (find_condition_and_thread): Adjust to use expression_up. (create_breakpoint): Use new instead of XNEW. (dtor_watchpoint): Don't xfree expression pointers, they're unique_ptr's now. (insert_watchpoint, remove_watchpoint): Adjust. (watch_command_1): Use expression_up. Use new instead of XCNEW. (catch_exec_command_1): Use new instead of XNEW. (bp_location_dtor): Don't xfree expression pointers, they're unique_ptr's now. (base_breakpoint_allocate_location) (strace_marker_create_breakpoints_sal): Use new instead of XNEW. (delete_breakpoint): Use delete instead of xfree. * breakpoint.h (struct bp_location) <cond>: Now an unique_ptr<expression> instead of a raw pointer. (struct watchpoint) <exp, cond_exp>: Likewise. * cli/cli-script.c (execute_control_command): Use expression_up instead of cleanups. * dtrace-probe.c (dtrace_process_dof_probe): Use expression_up. * eval.c (parse_and_eval_address, parse_and_eval_long) (parse_and_eval, parse_to_comma_and_eval, parse_and_eval_type): Use expression_up instead of cleanups. * expression.h (expression_up): New typedef. (parse_expression, parse_expression_with_language, parse_exp_1): Change return type to expression_up. * mi/mi-main.c (mi_cmd_data_evaluate_expression) (print_variable_or_computed): Use expression_up. * objc-lang.c (print_object_command): Use expression_up instead of cleanups. * parse.c (parse_exp_1, parse_exp_in_context) (parse_exp_in_context_1, parse_expression) (parse_expression_with_language): Return an expression_up instead of a raw pointer. (parse_expression_for_completion): Use expression_up. * printcmd.c (struct display) <exp>: Now an expression_up instead of a raw pointer. (print_command_1, output_command_const, set_command, x_command): Use expression_up instead of cleanups. (display_command): Likewise. Use new instead of XNEW. (free_display): Use delete instead of xfree. (do_one_display): Adjust to use expression_up. * remote.c (remote_download_tracepoint): Likewise. * stack.c (return_command): Likewise. * tracepoint.c (validate_actionline, encode_actions_1): Use expression_up instead of cleanups. * typeprint.c (whatis_exp, maintenance_print_type): Likewise. * value.c (init_if_undefined_command): Likewise. * varobj.c (struct varobj_root) <exp>: Now an expression_up instead of a raw pointer. (varobj_create): Adjust. (varobj_set_value): Use an expression_up instead of cleanups. (new_root_variable): Use new instead of XNEW. (free_variable): Use delete instead of xfree. (value_of_root_1): Use std::swap.	2016-11-08 15:26:43 +00:00
Trevor Saunders	870f88f755	remove trivialy unused variables ... gdb/ChangeLog: 2016-05-07 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * aarch64-linux-tdep.c (aarch64_linux_sigframe_init): Remove unused variables. * aarch64-tdep.c (aarch64_skip_prologue): Likewise. (aarch64_scan_prologue): Likewise. (aarch64_prologue_prev_register): Likewise. (aarch64_dwarf2_prev_register): Likewise. (pass_in_v): Likewise. (aarch64_push_dummy_call): Likewise. (aarch64_breakpoint_from_pc): Likewise. (aarch64_return_in_memory): Likewise. (aarch64_return_value): Likewise. (aarch64_displaced_step_b_cond): Likewise. (aarch64_displaced_step_cb): Likewise. (aarch64_displaced_step_tb): Likewise. (aarch64_gdbarch_init): Likewise. (aarch64_process_record): Likewise. * alpha-mdebug-tdep.c (alpha_mdebug_init_abi): Likewise. * alpha-tdep.c (_initialize_alpha_tdep): Likewise. * amd64-dicos-tdep.c (amd64_dicos_init_abi): Likewise. * amd64-linux-tdep.c (amd64_dtrace_parse_probe_argument): Likewise. * amd64-tdep.c (fixup_riprel): Likewise. * amd64-windows-tdep.c (amd64_windows_frame_decode_epilogue): Likewise. (amd64_windows_frame_decode_insns): Likewise. (amd64_windows_frame_cache): Likewise. (amd64_windows_frame_prev_register): Likewise. (amd64_windows_frame_this_id): Likewise. (amd64_windows_init_abi): Likewise. * arm-linux-tdep.c (arm_linux_get_syscall_number): Likewise. (arm_linux_get_next_pcs_syscall_next_pc): Likewise. * arm-symbian-tdep.c (arm_symbian_init_abi): Likewise. * arm-tdep.c (arm_make_epilogue_frame_cache): Likewise. (arm_epilogue_frame_prev_register): Likewise. (arm_record_vdata_transfer_insn): Likewise. (arm_record_exreg_ld_st_insn): Likewise. * auto-load.c (execute_script_contents): Likewise. (print_scripts): Likewise. * avr-tdep.c (avr_frame_prev_register): Likewise. (avr_push_dummy_call): Likewise. * bfin-linux-tdep.c (bfin_linux_sigframe_init): Likewise. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * blockframe.c (find_pc_partial_function_gnu_ifunc): Likewise. * break-catch-throw.c (fetch_probe_arguments): Likewise. * breakpoint.c (breakpoint_xfer_memory): Likewise. (breakpoint_init_inferior): Likewise. (breakpoint_inserted_here_p): Likewise. (software_breakpoint_inserted_here_p): Likewise. (hardware_breakpoint_inserted_here_p): Likewise. (bpstat_what): Likewise. (break_range_command): Likewise. (save_breakpoints): Likewise. * coffread.c (coff_symfile_read): Likewise. * cris-tdep.c (cris_push_dummy_call): Likewise. (cris_scan_prologue): Likewise. (cris_register_size): Likewise. (_initialize_cris_tdep): Likewise. * d-exp.y: Likewise. * dbxread.c (dbx_read_symtab): Likewise. (process_one_symbol): Likewise. (coffstab_build_psymtabs): Likewise. (elfstab_build_psymtabs): Likewise. * dicos-tdep.c (dicos_init_abi): Likewise. * disasm.c (do_mixed_source_and_assembly): Likewise. (gdb_disassembly): Likewise. * dtrace-probe.c (dtrace_process_dof): Likewise. * dwarf2read.c (error_check_comp_unit_head): Likewise. (build_type_psymtabs_1): Likewise. (skip_one_die): Likewise. (process_imported_unit_die): Likewise. (dwarf2_physname): Likewise. (read_file_scope): Likewise. (setup_type_unit_groups): Likewise. (create_dwo_cu_reader): Likewise. (create_dwo_cu): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (lookup_dwo_unit_in_dwp): Likewise. (free_dwo_file): Likewise. (check_producer): Likewise. (dwarf2_add_typedef): Likewise. (dwarf2_add_member_fn): Likewise. (read_unsigned_leb128): Likewise. (read_signed_leb128): Likewise. (dwarf2_const_value): Likewise. (follow_die_sig_1): Likewise. (dwarf_decode_macro_bytes): Likewise. * extension.c (restore_active_ext_lang): Likewise. * frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise. * ft32-tdep.c (ft32_analyze_prologue): Likewise. * gdbtypes.c (lookup_typename): Likewise. (resolve_dynamic_range): Likewise. (check_typedef): Likewise. * h8300-tdep.c (h8300_is_argument_spill): Likewise. (h8300_gdbarch_init): Likewise. * hppa-tdep.c (hppa32_push_dummy_call): Likewise. (hppa_frame_this_id): Likewise. (_initialize_hppa_tdep): Likewise. * hppanbsd-tdep.c (hppanbsd_sigtramp_cache_init): Likewise. * hppaobsd-tdep.c (hppaobsd_supply_fpregset): Likewise. * i386-dicos-tdep.c (i386_dicos_init_abi): Likewise. * i386-tdep.c (i386_bnd_type): Likewise. (i386_gdbarch_init): Likewise. (i386_mpx_bd_base): Likewise. * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Likewise. * i386obsd-tdep.c (i386obsd_elf_init_abi): Likewise. * ia64-tdep.c (examine_prologue): Likewise. (ia64_frame_cache): Likewise. (ia64_push_dummy_call): Likewise. * infcmd.c (finish_command_fsm_async_reply_reason): Likewise. (default_print_one_register_info): Likewise. * infrun.c (infrun_thread_ptid_changed): Likewise. (thread_still_needs_step_over): Likewise. (stop_all_threads): Likewise. (restart_threads): Likewise. (keep_going_stepped_thread): Likewise. * iq2000-tdep.c (iq2000_scan_prologue): Likewise. * language.c (language_init_primitive_type_symbols): Likewise. * linespec.c (add_sal_to_sals): Likewise. * linux-nat.c (status_callback): Likewise. (kill_unfollowed_fork_children): Likewise. (linux_nat_kill): Likewise. * linux-tdep.c (linux_fill_prpsinfo): Likewise. * linux-thread-db.c (thread_db_notice_clone): Likewise. (record_thread): Likewise. * location.c (string_to_event_location_basic): Likewise. * m32c-tdep.c (m32c_prev_register): Likewise. * m32r-linux-tdep.c (m32r_linux_init_abi): Likewise. * m32r-tdep.c (decode_prologue): Likewise. * m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise. * machoread.c (macho_symtab_read): Likewise. (macho_symfile_read): Likewise. (macho_symfile_offsets): Likewise. * maint.c (set_per_command_cmd): Likewise. * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise. (mi_cmd_stack_list_variables): Likewise. * mi/mi-main.c (mi_cmd_exec_run): Likewise. (output_register): Likewise. (mi_cmd_execute): Likewise. (mi_cmd_trace_define_variable): Likewise. (print_variable_or_computed): Likewise. * minsyms.c (prim_record_minimal_symbol_full): Likewise. * mn10300-tdep.c (mn10300_frame_prev_register): Likewise. * msp430-tdep.c (msp430_pseudo_register_write): Likewise. * mt-tdep.c (mt_registers_info): Likewise. * nios2-tdep.c (nios2_analyze_prologue): Likewise. (nios2_push_dummy_call): Likewise. (nios2_frame_unwind_cache): Likewise. (nios2_stub_frame_cache): Likewise. (nios2_stub_frame_sniffer): Likewise. (nios2_gdbarch_init): Likewise. * ppc-ravenscar-thread.c: Likewise. * ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise. * python/py-evts.c (add_new_registry): Likewise. * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise. (bpfinishpy_detect_out_scope_cb): Likewise. * python/py-framefilter.c (py_print_value): Likewise. * python/py-inferior.c (infpy_write_memory): Likewise. * python/py-infevents.c (create_inferior_call_event_object): Likewise. * python/py-infthread.c (thpy_get_ptid): Likewise. * python/py-linetable.c (ltpy_get_pcs_for_line): Likewise. (ltpy_get_all_source_lines): Likewise. (ltpy_is_valid): Likewise. (ltpy_iternext): Likewise. * python/py-symtab.c (symtab_and_line_to_sal_object): Likewise. * python/py-unwind.c (pyuw_object_attribute_to_pointer): Likewise. (unwind_infopy_str): Likewise. * python/py-varobj.c (py_varobj_get_iterator): Likewise. * ravenscar-thread.c (ravenscar_inferior_created): Likewise. * rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise. * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise. * s390-linux-tdep.c (s390_supply_tdb_regset): Likewise. (s390_frame_prev_register): Likewise. (s390_dwarf2_frame_init_reg): Likewise. (s390_record_vr): Likewise. (s390_process_record): Likewise. * score-tdep.c (score_push_dummy_call): Likewise. (score3_analyze_prologue): Likewise. * sh-tdep.c (sh_extract_return_value_nofpu): Likewise. * sh64-tdep.c (sh64_analyze_prologue): Likewise. (sh64_push_dummy_call): Likewise. (sh64_extract_return_value): Likewise. (sh64_do_fp_register): Likewise. * solib-aix.c (solib_aix_get_section_offsets): Likewise. * solib-darwin.c (darwin_read_exec_load_addr_from_dyld): Likewise. (darwin_solib_read_all_image_info_addr): Likewise. * solib-dsbt.c (enable_break): Likewise. * solib-frv.c (enable_break2): Likewise. (frv_fdpic_find_canonical_descriptor): Likewise. * solib-svr4.c (svr4_handle_solib_event): Likewise. * sparc-tdep.c (sparc_skip_stack_check): Likewise. * sparc64-linux-tdep.c (sparc64_linux_get_longjmp_target): Likewise. * sparcobsd-tdep.c (sparc32obsd_init_abi): Likewise. * spu-tdep.c (info_spu_dma_cmdlist): Likewise. * stack.c (read_frame_local): Likewise. * symfile.c (symbol_file_add_separate): Likewise. (remove_symbol_file_command): Likewise. * symmisc.c (maintenance_print_one_line_table): Likewise. * symtab.c (symbol_cache_flush): Likewise. (basic_lookup_transparent_type): Likewise. (sort_search_symbols_remove_dups): Likewise. * target.c (target_memory_map): Likewise. (target_detach): Likewise. (target_resume): Likewise. (acquire_fileio_fd): Likewise. (target_store_registers): Likewise. * thread.c (print_thread_info_1): Likewise. * tic6x-tdep.c (tic6x_analyze_prologue): Likewise. * tilegx-linux-tdep.c (tilegx_linux_sigframe_init): Likewise. * tilegx-tdep.c (tilegx_push_dummy_call): Likewise. (tilegx_analyze_prologue): Likewise. (tilegx_stack_frame_destroyed_p): Likewise. (tilegx_frame_cache): Likewise. * tracefile.c (trace_save): Likewise. * tracepoint.c (encode_actions_and_make_cleanup): Likewise. (start_tracing): Likewise. (print_one_static_tracepoint_marker): Likewise. * tui/tui.c (tui_enable): Likewise. * valops.c (value_struct_elt_bitpos): Likewise. (find_overload_match): Likewise. (find_oload_champ): Likewise. * value.c (value_contents_copy_raw): Likewise. * windows-tdep.c (windows_get_tlb_type): Likewise. * x86-linux-nat.c (x86_linux_enable_btrace): Likewise. * xcoffread.c (record_minimal_symbol): Likewise. (scan_xcoff_symtab): Likewise. * xtensa-tdep.c (execute_code): Likewise. (xtensa_gdbarch_init): Likewise. (_initialize_xtensa_tdep): Likewise.	2016-05-07 20:12:53 -04:00
Pedro Alves	c2f4122d5c	Limit breakpoint re-set to the current program space ... Currently, we always re-set all locations of all breakpoints. This commit makes us re-set only locations of the current program space. If we loaded symbols to a program space (e.g., "file" command or some shared library was loaded), GDB must run through all breakpoints and determine if any new locations need to be added to the breakpoint. However, there's no reason to recreate locations for _other_ program spaces, as those haven't changed. Similarly, when we create a new inferior, through e.g., a fork, GDB must run through all breakpoints and determine if any new locations need to be added to the breakpoint. There's no reason to destroy the locations of the parent inferior and other inferiors. We know those won't change. In addition to being inneficient, resetting breakpoints of inferiors that are currently running is problematic, because: - some targets can't read memory while the inferior is running. - the inferior might exit while we're re-setting its breakpoints, which may confuse prologue skipping. I went through all the places where we call breakpoint_re_set, and it seems to me that all can be changed to only re-set locations of the current program space. The patch that reversed threads order in "info threads" etc. happened to make gdb.threads/fork-plus-thread.exp expose this problem when testing on x86/-m32. The problem was latent and masked out by chance by the code-cache: https://sourceware.org/ml/gdb-patches/2016-01/msg00213.html Tested on x86-64 F20, native (-m64/-m32) and extended-remote gdbserver. Fixes the regression discussed in the url above with --target_board=unix/-m32: -FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited +PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited -FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left (timeout) -FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left (the program exited) +PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left +PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left gdb/ChangeLog: 2016-01-19 Pedro Alves <palves@redhat.com> * ax-gdb.c (agent_command_1): Adjust call to decode_line_full. * break-catch-throw.c (re_set_exception_catchpoint): Pass the current program space down to linespec decoding and breakpoint location updating. * breakpoint.c (parse_breakpoint_sals): Adjust calls to decode_line_full. (until_break_command): Adjust calls to decode_line_1. (base_breakpoint_decode_location, bkpt_decode_location): Add 'search_pspace' parameter. Pass it along. (bkpt_probe_create_sals_from_location): Adjust calls to parse_probes. (tracepoint_decode_location, tracepoint_probe_decode_location) (strace_marker_decode_location): Add 'search_pspace' parameter. Pass it along. (all_locations_are_pending): Rewrite to take a breakpoint and program space as arguments instead. (hoist_existing_locations): New function. (update_breakpoint_locations): Add 'filter_pspace' parameter. Use hoist_existing_locations instead of always removing all locations, and adjust to all_locations_are_pending change. (location_to_sals): Add 'search_pspace' parameter. Pass it along. Don't disable the breakpoint if there are other locations in another program space. (breakpoint_re_set_default): Adjust to pass down the current program space as filter program space. (decode_location_default): Add 'search_pspace' parameter and pass it along. (prepare_re_set_context): Don't switch program space here. (breakpoint_re_set): Use save_current_space_and_thread instead of save_current_program_space. * breakpoint.h (struct breakpoint_ops) <decode_location>: Add 'search_pspace' parameter. (update_breakpoint_locations): Add 'filter_pspace' parameter. * cli/cli-cmds.c (edit_command, list_command): Adjust calls to decode_line_1. * elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the current program space as filter program space. * linespec.c (struct linespec_state) <search_pspace>: New field. (create_sals_line_offset, convert_explicit_location_to_sals) (parse_linespec): Pass the search program space down. (linespec_state_constructor): Add 'search_pspace' parameter. Store it. (linespec_parser_new): Add 'search_pspace' parameter and pass it along. (linespec_lex_to_end): Adjust. (decode_line_full, decode_line_1): Add 'search_pspace' parameter and pass it along. (decode_line_with_last_displayed): Adjust. (collect_symtabs_from_filename, symtabs_from_filename): New 'search_pspace' parameter. Use it. (find_function_symbols): Pass the search program space down. * linespec.h (decode_line_1, decode_line_full): Add 'search_pspace' parameter. * probe.c (parse_probes_in_pspace): New function, factored out from ... (parse_probes): ... this. Add 'search_pspace' parameter and use it. * probe.h (parse_probes): Add pspace' parameter. * python/python.c (gdbpy_decode_line): Adjust. * tracepoint.c (scope_info): Adjust.	2016-01-19 12:18:14 +00:00
Pedro Alves	f303dbd60d	Fix PR threads/19422 - show which thread caused stop ... This commit changes GDB like this: - Program received signal SIGINT, Interrupt. + Thread 1 "main" received signal SIGINT, Interrupt. - Breakpoint 1 at 0x40087a: file threads.c, line 87. + Thread 3 "bar" hit Breakpoint 1 at 0x40087a: file threads.c, line 87. ... once the program goes multi-threaded. Until GDB sees a second thread spawn, the output is still the same as before, per the discussion back in 2012: https://www.sourceware.org/ml/gdb/2012-11/msg00010.html This helps non-stop mode, where you can't easily tell which thread hit a breakpoint or received a signal: (gdb) info threads Id Target Id Frame * 1 Thread 0x7ffff7fc1740 (LWP 19362) "main" (running) 2 Thread 0x7ffff7fc0700 (LWP 19366) "foo" (running) 3 Thread 0x7ffff77bf700 (LWP 19367) "bar" (running) (gdb) Program received signal SIGUSR1, User defined signal 1. 0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92 92 lll_wait_tid (pd->tid); (gdb) b threads.c:87 Breakpoint 1 at 0x40087a: file threads.c, line 87. (gdb) Breakpoint 1, thread_function1 (arg=0x1) at threads.c:87 87 usleep (1); /* Loop increment. */ The best the user can do is run "info threads" and try to figure things out. It actually also affects all-stop mode, in case of "handle SIG print nostop": ... Program received signal SIGUSR1, User defined signal 1. Program received signal SIGUSR1, User defined signal 1. Program received signal SIGUSR1, User defined signal 1. Program received signal SIGUSR1, User defined signal 1. ... The above doesn't give any clue that these were different threads getting the SIGUSR1 signal. I initially thought of lowercasing "breakpoint" in "Thread 3 hit Breakpoint 1" but then after trying it I realized that leaving "Breakpoint" uppercase helps the eye quickly find the relevant information. It's also easier to implement not showing anything about threads until the program goes multi-threaded this way. Here's a larger example session in non-stop mode: (gdb) c -a& Continuing. (gdb) interrupt -a (gdb) Thread 1 "main" stopped. 0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92 92 lll_wait_tid (pd->tid); Thread 2 "foo" stopped. 0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81 81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS) Thread 3 "bar" stopped. 0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81 81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS) b threads.c:87 Breakpoint 4 at 0x40087a: file threads.c, line 87. (gdb) b threads.c:67 Breakpoint 5 at 0x400811: file threads.c, line 67. (gdb) c -a& Continuing. (gdb) Thread 3 "bar" hit Breakpoint 4, thread_function1 (arg=0x1) at threads.c:87 87 usleep (1); /* Loop increment. */ Thread 2 "foo" hit Breakpoint 5, thread_function0 (arg=0x0) at threads.c:68 68 (*myp) ++; info threads Id Target Id Frame * 1 Thread 0x7ffff7fc1740 (LWP 31957) "main" (running) 2 Thread 0x7ffff7fc0700 (LWP 31961) "foo" thread_function0 (arg=0x0) at threads.c:68 3 Thread 0x7ffff77bf700 (LWP 31962) "bar" thread_function1 (arg=0x1) at threads.c:87 (gdb) shell kill -SIGINT 31957 (gdb) Thread 1 "main" received signal SIGINT, Interrupt. 0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92 92 lll_wait_tid (pd->tid); info threads Id Target Id Frame * 1 Thread 0x7ffff7fc1740 (LWP 31957) "main" 0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92 2 Thread 0x7ffff7fc0700 (LWP 31961) "foo" thread_function0 (arg=0x0) at threads.c:68 3 Thread 0x7ffff77bf700 (LWP 31962) "bar" thread_function1 (arg=0x1) at threads.c:87 (gdb) t 2 [Switching to thread 2, Thread 0x7ffff7fc0700 (LWP 31961)] #0 thread_function0 (arg=0x0) at threads.c:68 68 (*myp) ++; (gdb) catch syscall Catchpoint 6 (any syscall) (gdb) c& Continuing. (gdb) Thread 2 "foo" hit Catchpoint 6 (call to syscall nanosleep), 0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81 81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS) I'll work on documentation next if this looks agreeable. This patch applies on top of the star wildcards thread IDs series: https://sourceware.org/ml/gdb-patches/2016-01/msg00291.html For convenience, I've pushed this to the users/palves/show-which-thread-caused-stop branch. gdb/doc/ChangeLog: 2016-01-18 Pedro Alves <palves@redhat.com> * gdb.texinfo (Threads): Mention that GDB displays the ID and name of the thread that hit a breakpoint or received a signal. gdb/ChangeLog: 2016-01-18 Pedro Alves <palves@redhat.com> * NEWS: Mention that GDB now displays the ID and name of the thread that hit a breakpoint or received a signal. * break-catch-sig.c (signal_catchpoint_print_it): Use maybe_print_thread_hit_breakpoint. * break-catch-syscall.c (print_it_catch_syscall): Likewise. * break-catch-throw.c (print_it_exception_catchpoint): Likewise. * breakpoint.c (maybe_print_thread_hit_breakpoint): New function. (print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib) (print_it_catch_exec, print_it_ranged_breakpoint) (print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it): Use maybe_print_thread_hit_breakpoint. * breakpoint.h (maybe_print_thread_hit_breakpoint): Declare. * gdbthread.h (show_thread_that_caused_stop): Declare. * infrun.c (print_signal_received_reason): Print which thread received signal. * thread.c (show_thread_that_caused_stop): New function. gdb/testsuite/ChangeLog: 2016-01-18 Pedro Alves <palves@redhat.com> * gdb.base/async-shell.exp: Adjust expected output. * gdb.base/dprintf-non-stop.exp: Adjust expected output. * gdb.base/siginfo-thread.exp: Adjust expected output. * gdb.base/watchpoint-hw-hit-once.exp: Adjust expected output. * gdb.java/jnpe.exp: Adjust expected output. * gdb.threads/clone-new-thread-event.exp: Adjust expected output. * gdb.threads/continue-pending-status.exp: Adjust expected output. * gdb.threads/leader-exit.exp: Adjust expected output. * gdb.threads/manythreads.exp: Adjust expected output. * gdb.threads/pthreads.exp: Adjust expected output. * gdb.threads/schedlock.exp: Adjust expected output. * gdb.threads/siginfo-threads.exp: Adjust expected output. * gdb.threads/signal-command-multiple-signals-pending.exp: Adjust expected output. * gdb.threads/signal-delivered-right-thread.exp: Adjust expected output. * gdb.threads/sigthread.exp: Adjust expected output. * gdb.threads/watchpoint-fork.exp: Adjust expected output.	2016-01-18 15:15:18 +00:00
Joel Brobecker	618f726fcb	GDB copyright headers update after running GDB's copyright.py script. ... gdb/ChangeLog: Update year range in copyright notice of all files.	2016-01-01 08:43:22 +04:00
Keith Seitz	6799407467	Mass rename explicit' -> explicit_loc'. ... BuildBot reminded me that "explicit" is a reserved keyword in C++. This patch simply renames all the (illegal) uses of "explicit". This should fix the build errors with --enable-build-with-cxx bots. gdb/ChangeLog * break-catch-throw.c (re_set_exception_catchpoint) Rename reserved C++ keyword "explicit" to "explicit_loc". * breakpoint.c (create_overlay_event_breakpoint) (create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint, update_static_tracepoint): Rename reserved C++ keyword "explicit" to "explicit_loc". * completer.c (collect_explicit_location_matches) (explicit_location_completer): Rename reserved C++ keyword "explicit" to "explicit_loc". * linespec.c (struct linespec) <explicit>: Rename to "explicit_loc". (canonicalize_linespec, create_sals_line_offset) (convert_linespec_to_sals, convert_explicit_location_to_sals) (event_location_to_sals, decode_objc): Rename reserved C++ keyword "explicit" to "explicit_loc". * location.c (struct event_location) <explicit>: Rename to "explicit_loc". (initialize_explicit_location, new_explicit_location) (explicit_location_to_string_internal, explicit_location_to_linespec): Rename reserved C++ keyword "explicit" to "explicit_loc". * location.h (explicit_location_to_string) (explicit_location_to_linespec, initialize_explicit_location) (new_explicit_location): Rename reserved C++ keyword "explicit" to "explicit_loc". * mi/mi-cmd-break.c (mi_cmd_break_insert_1): Rename reserved C++ keyword "explicit" to "explicit_loc".	2015-08-13 09:48:12 -07:00
Keith Seitz	00e52e5376	Explicit locations: introduce explicit locations ... This patch add support for explicit locations and switches many linespec locations to this new location type. This patch also converts all linespec locations entered by the user to an explicit representation internally (thus bypassing the linespec parser when resetting the breakpoint). This patch does not introduce any user-visible changes. gdb/ChangeLog: * break-catch-throw.c (re_set_exception_catchpoint): Convert linespec into explicit location. * breakpoint.c (create_overlay_breakpoint) (create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint): Convert linespec into explicit location. (update_static_tracepoint): Convert linespec into explicit location. * linespec.c (enum offset_relative_sign, struct line_offset): Move location.h. (struct linespec) <expression, expr_pc, source_filename> <function_name, label_name, line_offset>: Replace with ... <explicit>: ... this. <is_linespec>: New member. (PARSER_EXPLICIT): New accessor macro. (undefined_label_error): New function. (source_file_not_found_error): New function. (linespec_parse_basic): The parser result is now an explicit location. Use PARSER_EXPLICIT to access it. Use undefined_label_error. (canonicalize_linespec): Convert canonical linespec into explicit location. Move string representation of location to explicit_location_to_linespec and use it and explicit_location_to_string to save string representations of the canonical location. (create_sals_line_offset, convert_linespec_to_sals): `ls' contains an explicit location. Update all references. (convert_explicit_location_to_sals): New function. (parse_linespec): Use PARSER_EXPLICIT to access the parser result's explicit location. (linespec_state_constructor): Initialize is_linespec. Use PARSER_EXPLICIT. (linespec_parser_delete): Use PARSER_EXPLICIT to access the parser's result. (event_location_to_sals): For linespec locations, set is_linespec. Handle explicit locations. (decode_objc): 'ls' contains an explicit location now. Update all references. (symtabs_from_filename): Use source_file_not_found_error. * location.c (struct event_location.u) <explicit>: New member. (initialize_explicit_location): New function. (initialize_event_location): Initialize explicit locations. (new_explicit_location, get_explicit_location) (get_explicit_location_const): New functions. (explicit_to_string_internal): New function; most of contents moved from canonicalize_linespec. (explicit_location_to_string): New function. (explicit_location_to_linespec): New function. (copy_event_location, delete_event_location) (event_location_to_string_const, event_location_empty_p): Handle explicit locations. * location.h (enum offset_relative_sign, struct line_offset): Move here from linespec.h. (enum event_location_type): Add EXPLICIT_LOCATION. (struct explicit_location): New structure. (explicit_location_to_string): Declare. (explicit_location_to_linespec): Declare. (new_explicit_location, get_explicit_locationp (get_explicit_location_const, initialize_explicit_location): Declare.	2015-08-11 17:09:35 -07:00
Keith Seitz	5b56227bdc	Explicit locations: introduce probe locations ... This patch adds support for probe locations and converts existing probe linespec locations to the new location type. gdb/ChangeLog: * break-catch-throw.c (re_set_exception_catchpoint): Convert linespec for stap probe to probe location. * breakpoint.c (create_longjmp_master_breakpoint) (create_exception_master_breakpoint): Likewise. (break_command_1): Remove local variable `arg_cp'. Check location type to set appropriate breakpoint ops methods. (trace_command): Likewise. * linespec.c (event_location_to_sals): Assert on probe locations. * location.c (EL_PROBE): Add macro definition. (new_probe_location, get_probe_location): New functions. (copy_event_location, delete_event_location, event_location_to_string) (string_to_event_location, event_location_empty_p): Handle probe locations. * location.h (enum event_location_type): Add PROBE_LOCATION. (new_probe_location, get_probe_location): Declare. * probe.c (parse_probes): Assert that LOCATION is a probe location. Convert linespec into probe location.	2015-08-11 17:09:35 -07:00
Keith Seitz	f00aae0f7b	Explicit locations: use new location API ... This patch converts the code base to use the new struct event_location API being introduced. This patch preserves the current functionality and adds no new features. The "big picture" API usage introduced by this patch may be illustrated with a simple exmaple. Where previously developers would write: void my_command (char *arg, int from_tty) { create_breakpoint (..., arg, ...); ... } one now uses: void my_command (char *arg, int from_tty) { struct event_locaiton *location; struct cleanup *back_to; location = string_to_event_locaiton (&arg, ...); back_to = make_cleanup_delete_event_location (location); create_breakpoint (..., location, ...); do_cleanups (back_to); } Linespec-decoding functions (now called location-decoding) such as decode_line_full no longer skip argument pointers over processed input. That functionality has been moved into string_to_event_location as demonstrated above. gdb/ChangeLog * ax-gdb.c: Include location.h. (agent_command_1) Use linespec location instead of address string. * break-catch-throw.c: Include location.h. (re_set_exception_catchpoint): Use linespec locations instead of address strings. * breakpoint.c: Include location.h. (create_overlay_event_breakpoint, create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint, update_breakpoints_after_exec): Use linespec location instead of address string. (print_breakpoint_location): Use locations and event_location_to_string. Print extra_string for pending locations for non-MI streams. (print_one_breakpoint_location): Use locations and event_location_to_string. (init_raw_breakpoint_without_location): Initialize b->location. (create_thread_event_breakpoint): Use linespec location instead of address string. (init_breakpoint_sal): Likewise. Only save extra_string if it is non-NULL and not the empty string. Use event_location_to_string instead of `addr_string'. Constify `p' and `endp'. Use skip_spaces_const/skip_space_const instead of non-const versions. Copy the location into the breakpoint. If LOCATION is NULL, save the breakpoint address as a linespec location instead of an address string. (create_breakpoint_sal): Change `addr_string' parameter to a struct event_location. All uses updated. (create_breakpoints_sal): Likewise for local variable `addr_string'. (parse_breakpoint_sals): Use locations instead of address strings. Remove check for empty linespec with conditional. Refactor. (decode_static_tracepoint_spec): Make argument const and update function. (create_breakpoint): Change `arg' to a struct event_location and rename. Remove `copy_arg' and `addr_start'. If EXTRA_STRING is empty, set it to NULL. Don't populate `canonical' for pending breakpoints. Pass `extra_string' to find_condition_and_thread. Clear `extra_string' if `rest' was NULL. Do not error with "garbage after location" if setting a dprintf breakpoint. Copy the location into the breakpoint instead of an address string. (break_command_1): Use string_to_event_location and pass this to create_breakpoint instead of an address string. Check against `arg_cp' for a probe linespec. (dprintf_command): Use string_to_event_location and pass this to create_breakpoint instead of an address string. Throw an exception if no format string was specified. (print_recreate_ranged_breakpoint): Use event_location_to_string instead of address strings. (break_range_command, until_break_command) (init_ada_exception_breakpoint): Use locations instead of address strings. (say_where): Print out extra_string for pending locations. (base_breakpoint_dtor): Delete `location' and `location_range_end' of the breakpoint. (base_breakpoint_create_sals_from_location): Use struct event_location instead of address string. Remove `addr_start' and `copy_arg' parameters. (base_breakpoint_decode_location): Use struct event_location instead of address string. (bkpt_re_set): Use locations instead of address strings. Use event_location_empty_p to check for unset location. (bkpt_print_recreate): Use event_location_to_string instead of an address string. Print out extra_string for pending locations. (bkpt_create_sals_from_location, bkpt_decode_location) (bkpt_probe_create_sals_from_location): Use struct event_location instead of address string. (bkpt_probe_decode_location): Use struct event_location instead of address string. (tracepoint_print_recreate): Use event_location_to_string to recreate the tracepoint. (tracepoint_create_sals_from_location, tracepoint_decode_location) (tracepoint_probe_create_sals_from_location) (tracepoint_probe_decode_location): Use struct event_location instead of address string. (dprintf_print_recreate): Use event_location_to_string to recreate the dprintf. (dprintf_re_set): Remove check for valid/missing format string. (strace_marker_create_sals_from_location) (strace_marker_create_breakpoints_sal, strace_marker_decode_location) (update_static_tracepoint): Use struct event_location instead of address string. (location_to_sals): Likewise. Pass `extra_string' to find_condition_and_thread. For newly resolved pending breakpoint locations, clear the location's string representation. Assert that the breakpoint's condition string is NULL when condition_not_parsed. (breakpoint_re_set_default, create_sals_from_location_default) (decode_location_default, trace_command, ftrace_command) (strace_command, create_tracepoint_from_upload): Use locations instead of address strings. * breakpoint.h (struct breakpoint_ops) <create_sals_from_location>: Use struct event_location instead of address string. Update all uses. <decode_location>: Likewise. (struct breakpoint) <addr_string>: Change to struct event_location and rename `location'. <addr_string_range_end>: Change to struct event_location and rename `location_range_end'. (create_breakpoint): Use struct event_location instead of address string. * cli/cli-cmds.c: Include location.h. (edit_command, list_command): Use locations instead of address strings. * elfread.c: Include location.h. (elf_gnu_ifunc_resolver_return_stop): Use event_location_to_string. * guile/scm-breakpoint.c: Include location.h. (bpscm_print_breakpoint_smob): Use event_location_to_string. (gdbscm_register_breakpoint): Use locations instead of address strings. * linespec.c: Include location.h. (struct ls_parser) <stream>: Change to const char *. (PARSER_STREAM): Update. (lionespec_lexer_lex_keyword): According to find_condition_and_thread, keywords must be followed by whitespace. (canonicalize_linespec): Save a linespec location into `canonical'. Save a canonical linespec into `canonical'. (parse_linespec): Change `argptr' to const char * and rename `arg'. All uses updated. Update function description. (linespec_parser_new): Initialize `parser'. Update initialization of parsing stream. (event_location_to_sals): New function. (decode_line_full): Change `argptr' to a struct event_location and rename it `location'. Use locations instead of address strings. Call event_location_to_sals instead of parse_linespec. (decode_line_1): Likewise. (decode_line_with_current_source, decode_line_with_last_displayed) Use locations instead of address strings. (decode_objc): Likewise. Change `argptr' to const char * and rename `arg'. (destroy_linespec_result): Delete the linespec result's location instead of freeing the address string. * linespec.h (struct linespec_result) <addr_string>: Change to struct event_location and rename to ... <location>: ... this. (decode_line_1, decode_line_full): Change `argptr' to struct event_location. All callers updated. * mi/mi-cmd-break.c: Include language.h, location.h, and linespec.h. (mi_cmd_break_insert_1): Use locations instead of address strings. Throw an error if there was "garbage" at the end of the specified linespec. * probe.c: Include location.h. (parse_probes): Change `argptr' to struct event_location. Use event locations instead of address strings. * probe.h (parse_probes): Change `argptr' to struct event_location. * python/py-breakpoint.c: Include location.h. (bppy_get_location): Constify local variable `str'. Use event_location_to_string. (bppy_init): Use locations instead of address strings. * python/py-finishbreakpoint.c: Include location.h. (bpfinishpy_init): Remove local variable `addr_str'. Use locations instead of address strings. * python/python.c: Include location.h. (gdbpy_decode_line): Use locations instead of address strings. * remote.c: Include location.h. (remote_download_tracepoint): Use locations instead of address strings. * spu-tdep.c: Include location.h. (spu_catch_start): Remove local variable `buf'. Use locations instead of address strings. * tracepoint.c: Include location.h. (scope_info): Use locations instead of address strings. (encode_source_string): Constify parameter `src'. * tracepoint.h (encode_source_string): Likewise. gdb/testsuite/ChangeLog * gdb.base/dprintf-pending.exp: Update dprintf "without format" test. Add tests for missing ",FMT" and ",".	2015-08-11 17:09:35 -07:00
Keith Seitz	5f700d83f7	Explicit locations: rename "address string"/"addr_string" to "location" ... This patch renames all occurrances of "addr_string" and "address string" in the breakpoint/linespec APIs. This will emphasize the change from address strings used in setting breakpoints (et al) to the new locations-based API introduced in subsequent patches. gdb/ChangeLog: * breakpoint.h (struct breakpoint_ops) <create_sals_from_address>: Renamed to create_sals_from_location. <decode_linespec>: Renamed to decode_location. Update all callers. * breakpoint.c (create_sals_from_address_default): Renamed to ... (create_sals_from_location_default): ... this. (addr_string_to_sals): Renamed to ... (location_to_sals): ... this. (decode_linespec_default): Renamed to ... (decode_location_default): ... this. (base_breakpoint_create_sals_from_address): Renamed to ... (base_breakpoint_create_sals_from_location): ... this. (bkpt_create_sals_from_address): Renamed to ... (bkpt_create_sals_from_location): ... this. (bkpt_decode_linespec): Renamed to ... (bkpt_decode_location): ... this. (bkpt_probe_create_sals_from_address): Renamed to ... (bkpt_probe_create_sals_from_location): ... this. (tracepoint_create_sals_from_address): Renamed to ... (tracepoint_create_sals_from_location): ... this. (tracepoint_decode_linespec): Renamed to ... (tracepoint_decode_location): ... this. (tracepoint_probe_create_sals_from_address): Renamed to ... (tracepoint_probe_create_sals_from_location): ... this. (tracepoint_probe_decode_linespec): Renamed to ... (tracepoint_probe_decode_location): ... this. (strace_marker_create_sals_from_address): Renamed to ... (strace_marker_create_sals_from_location): ... this. (decode_linespec_default): Renamed to ... (decode_location_default): ... this.	2015-08-11 17:09:35 -07:00
Pedro Alves	492d29ea1c	Split TRY_CATCH into TRY + CATCH ... This patch splits the TRY_CATCH macro into three, so that we go from this: ~~~ volatile gdb_exception ex; TRY_CATCH (ex, RETURN_MASK_ERROR) { } if (ex.reason < 0) { } ~~~ to this: ~~~ TRY { } CATCH (ex, RETURN_MASK_ERROR) { } END_CATCH ~~~ Thus, we'll be getting rid of the local volatile exception object, and declaring the caught exception in the catch block. This allows reimplementing TRY/CATCH in terms of C++ exceptions when building in C++ mode, while still allowing to build GDB in C mode (using setjmp/longjmp), as a transition step. TBC, after this patch, is it _not_ valid to have code between the TRY and the CATCH blocks, like: TRY { } // some code here. CATCH (ex, RETURN_MASK_ERROR) { } END_CATCH Just like it isn't valid to do that with C++'s native try/catch. By switching to creating the exception object inside the CATCH block scope, we can get rid of all the explicitly allocated volatile exception objects all over the tree, and map the CATCH block more directly to C++'s catch blocks. The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was done with a script, rerun from scratch at every rebase, no manual editing involved. After the mechanical conversion, a few places needed manual intervention, to fix preexisting cases where we were using the exception object outside of the TRY_CATCH block, and cases where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH after this patch]. The result was folded into this patch so that GDB still builds at each incremental step. END_CATCH is necessary for two reasons: First, because we name the exception object in the CATCH block, which requires creating a scope, which in turn must be closed somewhere. Declaring the exception variable in the initializer field of a for block, like: #define CATCH(EXCEPTION, mask) \ for (struct gdb_exception EXCEPTION; \ exceptions_state_mc_catch (&EXCEPTION, MASK); \ EXCEPTION = exception_none) would avoid needing END_CATCH, but alas, in C mode, we build with C90, which doesn't allow mixed declarations and code. Second, because when TRY/CATCH are wired to real C++ try/catch, as long as we need to handle cleanup chains, even if there's no CATCH block that wants to catch the exception, we need for stop at every frame in the unwind chain and run cleanups, then rethrow. That will be done in END_CATCH. After we require C++, we'll still need TRY/CATCH/END_CATCH until cleanups are completely phased out -- TRY/CATCH in C++ mode will save/restore the current cleanup chain, like in C mode, and END_CATCH catches otherwise uncaugh exceptions, runs cleanups and rethrows, so that C++ cleanups and exceptions can coexist. IMO, this still makes the TRY/CATCH code look a bit more like a newcomer would expect, so IMO worth it even if we weren't considering C++. gdb/ChangeLog. 2015-03-07 Pedro Alves <palves@redhat.com> * common/common-exceptions.c (struct catcher) <exception>: No longer a pointer to volatile exception. Now an exception value. <mask>: Delete field. (exceptions_state_mc_init): Remove all parameters. Adjust. (exceptions_state_mc): No longer pop the catcher here. (exceptions_state_mc_catch): New function. (throw_exception): Adjust. * common/common-exceptions.h (exceptions_state_mc_init): Remove all parameters. (exceptions_state_mc_catch): Declare. (TRY_CATCH): Rename to ... (TRY): ... this. Remove EXCEPTION and MASK parameters. (CATCH, END_CATCH): New. All callers adjusted. gdb/gdbserver/ChangeLog: 2015-03-07 Pedro Alves <palves@redhat.com> Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH instead.	2015-03-07 15:14:14 +00:00
Pedro Alves	7556d4a4f6	Normalize TRY_CATCH exception handling block ... This normalizes some exception catch blocks that check for ex.reason to look like this: ~~~ volatile gdb_exception ex; TRY_CATCH (ex, RETURN_MASK_ALL) { ... } if (ex.reason < 0) { ... } ~~~ This is a preparation step for running a script that converts all TRY_CATCH uses to look like this instead: ~~~ TRY { ... } CATCH (ex, RETURN_MASK_ALL) { ... } END_CATCH ~~~ The motivation for that change is being able to reimplent TRY/CATCH in terms of C++ try/catch. This commit makes it so that: - no condition other than ex.reason < 0 is checked in the if predicate - there's no "else" block to check whether no exception was caught - there's no code between the TRY_CATCH (TRY) block and the 'if (ex.reason < 0)' block (CATCH). - the exception object is no longer referred to outside the if/catch block. Note the local volatile exception objects that are currently defined inside functions that use TRY_CATCH will disappear. In cases it's more convenient to still refer to the exception outside the catch block, a new non-volatile local is added and copy to that object is made within the catch block. The following patches should make this all clearer. gdb/ChangeLog: 2015-03-07 Pedro Alves <palves@redhat.com> * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache) (amd64_epilogue_frame_cache): Normal exception handling code. * break-catch-throw.c (check_status_exception_catchpoint) (re_set_exception_catchpoint): Ditto. * cli/cli-interp.c (safe_execute_command): * cli/cli-script.c (script_from_file): Ditto. * compile/compile-c-symbols.c (generate_c_for_for_one_variable): Ditto. * compile/compile-object-run.c (compile_object_run): Ditto. * cp-abi.c (baseclass_offset): Ditto. * cp-valprint.c (cp_print_value): Ditto. * exceptions.c (catch_exceptions_with_msg): * frame-unwind.c (frame_unwind_try_unwinder): Ditto. * frame.c (get_frame_address_in_block_if_available): Ditto. * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache) (i386_sigtramp_frame_cache): Ditto. * infcmd.c (post_create_inferior): Ditto. * linespec.c (parse_linespec, find_linespec_symbols): * p-valprint.c (pascal_object_print_value): Ditto. * parse.c (parse_expression_for_completion): Ditto. * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto. * remote.c (remote_get_noisy_reply): Ditto. * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto. * solib-svr4.c (solib_svr4_r_map): Ditto.	2015-03-07 14:56:43 +00:00
Pedro Alves	fe978cb071	C++ keyword cleanliness, mostly auto-generated ... This patch renames symbols that happen to have names which are reserved keywords in C++. Most of this was generated with Tromey's cxx-conversion.el script. Some places where later hand massaged a bit, to fix formatting, etc. And this was rebased several times meanwhile, along with re-running the script, so re-running the script from scratch probably does not result in the exact same output. I don't think that matters anyway. gdb/ 2015-02-27 Tom Tromey <tromey@redhat.com> Pedro Alves <palves@redhat.com> Rename symbols whose names are reserved C++ keywords throughout. gdb/gdbserver/ 2015-02-27 Tom Tromey <tromey@redhat.com> Pedro Alves <palves@redhat.com> Rename symbols whose names are reserved C++ keywords throughout.	2015-02-27 16:33:07 +00:00
Joel Brobecker	32d0add0a6	Update year range in copyright notice of all files owned by the GDB project. ... gdb/ChangeLog: Update year range in copyright notice of all files.	2015-01-01 13:32:14 +04:00
Gary Benson	c765fdb902	Remove spurious exceptions.h inclusions ... defs.h includes utils.h, and utils.h includes exceptions.h. All GDB .c files include defs.h as their first line, so no file other than utils.h needs to include exceptions.h. This commit removes all such inclusions. gdb/ChangeLog: * ada-lang.c: Do not include exceptions.h. * ada-valprint.c: Likewise. * amd64-tdep.c: Likewise. * auto-load.c: Likewise. * block.c: Likewise. * break-catch-throw.c: Likewise. * breakpoint.c: Likewise. * btrace.c: Likewise. * c-lang.c: Likewise. * cli/cli-cmds.c: Likewise. * cli/cli-interp.c: Likewise. * cli/cli-script.c: Likewise. * completer.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-support.c: Likewise. * cp-valprint.c: Likewise. * darwin-nat.c: Likewise. * dwarf2-frame-tailcall.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * event-top.c: Likewise. * f-valprint.c: Likewise. * frame-unwind.c: Likewise. * frame.c: Likewise. * gdbtypes.c: Likewise. * gnu-v2-abi.c: Likewise. * gnu-v3-abi.c: Likewise. * guile/scm-auto-load.c: Likewise. * guile/scm-breakpoint.c: Likewise. * guile/scm-cmd.c: Likewise. * guile/scm-frame.c: Likewise. * guile/scm-lazy-string.c: Likewise. * guile/scm-param.c: Likewise. * guile/scm-symbol.c: Likewise. * guile/scm-type.c: Likewise. * hppa-hpux-tdep.c: Likewise. * i386-tdep.c: Likewise. * inf-loop.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * infrun.c: Likewise. * interps.c: Likewise. * interps.h: Likewise. * jit.c: Likewise. * linespec.c: Likewise. * linux-nat.c: Likewise. * linux-thread-db.c: Likewise. * m32r-rom.c: Likewise. * main.c: Likewise. * memory-map.c: Likewise. * mi/mi-cmd-break.c: Likewise. * mi/mi-cmd-stack.c: Likewise. * mi/mi-interp.c: Likewise. * mi/mi-main.c: Likewise. * monitor.c: Likewise. * nto-procfs.c: Likewise. * objc-lang.c: Likewise. * p-valprint.c: Likewise. * parse.c: Likewise. * ppc-linux-tdep.c: Likewise. * printcmd.c: Likewise. * probe.c: Likewise. * python/py-auto-load.c: Likewise. * python/py-breakpoint.c: Likewise. * python/py-cmd.c: Likewise. * python/py-finishbreakpoint.c: Likewise. * python/py-frame.c: Likewise. * python/py-framefilter.c: Likewise. * python/py-function.c: Likewise. * python/py-gdb-readline.c: Likewise. * python/py-inferior.c: Likewise. * python/py-infthread.c: Likewise. * python/py-lazy-string.c: Likewise. * python/py-linetable.c: Likewise. * python/py-param.c: Likewise. * python/py-prettyprint.c: Likewise. * python/py-symbol.c: Likewise. * python/py-type.c: Likewise. * python/py-value.c: Likewise. * python/python-internal.h: Likewise. * python/python.c: Likewise. * record-btrace.c: Likewise. * record-full.c: Likewise. * regcache.c: Likewise. * remote-fileio.c: Likewise. * remote-mips.c: Likewise. * remote.c: Likewise. * rs6000-aix-tdep.c: Likewise. * rs6000-nat.c: Likewise. * skip.c: Likewise. * solib-darwin.c: Likewise. * solib-dsbt.c: Likewise. * solib-frv.c: Likewise. * solib-ia64-hpux.c: Likewise. * solib-spu.c: Likewise. * solib-svr4.c: Likewise. * solib.c: Likewise. * spu-tdep.c: Likewise. * stack.c: Likewise. * stap-probe.c: Likewise. * symfile-mem.c: Likewise. * symmisc.c: Likewise. * target.c: Likewise. * thread.c: Likewise. * top.c: Likewise. * tracepoint.c: Likewise. * tui/tui-interp.c: Likewise. * typeprint.c: Likewise. * utils.c: Likewise. * valarith.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * windows-nat.c: Likewise. * xml-support.c: Likewise.	2014-10-08 09:33:22 +01:00
Sergio Durigan Junior	1bff71c325	Fix probe-related internal error on AIX ... -- Initial message by Tom Tromey: While testing on AIX, I happened to notice an internal error coming from parse_probes. This happens because there are no probes defined on this platform. This patch fixes the problem by changing an assert into an ordinary error, and then changing the relevant caller to cope. This fixes a few tests on AIX; also regtested on x86-64 Fedora 18. -- Followup by Sergio Durigan Junior: By reading the patch (and the original code), I found it a little bit obscure, so I took the liberty to try to improve it. Here's the patch. Could you please take a look and see if it works on AIX (and also if you like the approach)? gdb/ 2014-03-20 Tom Tromey <tromey@redhat.com> Sergio Durigan Junior <sergiodj@redhat.com> * probe.c (parse_probes): Turn assert into an ordinary error. * break-catch-throw.c (re_set_exception_catchpoint): Ignore exceptions when parsing probes. Rearrange the code for clarity.	2014-03-20 18:08:31 -03:00
Tom Tromey	729662a522	change probes to be program-space-independent ... This changes the probes to be independent of the program space. After this, when a probe's address is needed, it is determined by applying offsets at the point of use. This introduces a bound_probe object, similar to bound minimal symbols. Objects of this type are used when it's necessary to pass a probe and its corresponding objfile. This removes the backlink from probe to objfile, which was primarily used to fetch the architecture to use. This adds a get_probe_address function which calls a probe method to compute the probe's relocated address. Similarly, it adds an objfile parameter to the semaphore methods so they can do the relocation properly as well. 2014-03-03 Tom Tromey <tromey@redhat.com> * break-catch-throw.c (fetch_probe_arguments): Use bound probes. * breakpoint.c (create_longjmp_master_breakpoint): Use get_probe_address. (add_location_to_breakpoint, bkpt_probe_insert_location) (bkpt_probe_remove_location): Update. * breakpoint.h (struct bp_location) <probe>: Now a bound_probe. * elfread.c (elf_symfile_relocate_probe): Remove. (elf_probe_fns): Update. (insert_exception_resume_breakpoint): Change type of "probe" parameter to bound_probe. (check_exception_resume): Update. * objfiles.c (objfile_relocate1): Don't relocate probes. * probe.c (bound_probe_s): New typedef. (parse_probes): Use get_probe_address. Set sal's objfile. (find_probe_by_pc): Return a bound_probe. (collect_probes): Return a VEC(bound_probe_s). (compare_probes): Update. (gen_ui_out_table_header_info): Change type of "probes" parameter. Update. (info_probes_for_ops): Update. (get_probe_address): New function. (probe_safe_evaluate_at_pc): Update. * probe.h (struct probe_ops) <get_probe_address>: New field. <set_semaphore, clear_semaphore>: Add objfile parameter. (struct probe) <objfile>: Remove field. <arch>: New field. <address>: Update comment. (struct bound_probe): New. (find_probe_by_pc): Return a bound_probe. (get_probe_address): Declare. * solib-svr4.c (struct probe_and_action) <address>: New field. (hash_probe_and_action, equal_probe_and_action): Update. (register_solib_event_probe): Add address parameter. (solib_event_probe_at): Update. (svr4_create_probe_breakpoints): Add objfile parameter. Use get_probe_address. * stap-probe.c (struct stap_probe) <sem_addr>: Update comment. (stap_get_probe_address): New function. (stap_can_evaluate_probe_arguments, compute_probe_arg) (compile_probe_arg): Update. (stap_set_semaphore, stap_clear_semaphore): Compute semaphore's address. (handle_stap_probe): Don't relocate the probe. (stap_relocate): Remove. (stap_gen_info_probes_table_values): Update. (stap_probe_ops): Remove stap_relocate. * symfile-debug.c (debug_sym_relocate_probe): Remove. (debug_sym_probe_fns): Update. * symfile.h (struct sym_probe_fns) <sym_relocate_probe>: Remove. * symtab.c (init_sal): Use memset. * symtab.h (struct symtab_and_line) <objfile>: New field. * tracepoint.c (start_tracing, stop_tracing): Update.	2014-03-03 12:47:20 -07:00
Joel Brobecker	ecd75fc8ee	Update Copyright year range in all files maintained by GDB.	2014-01-01 07:54:24 +04:00
Sergio Durigan Junior	08a6411c71	Sanitize access to gdbarch on the SDT probe API (and fix ARM bug) ... This patch sanitizes the access to gdbarch made by various functions of the SDT probe API. Before this patch, gdbarch was being accessed via the probe's objfile; however, this proved to cause a bug on 32-bit ARM targets because during the parsing of the probe's arguments the code needed to access some pseudo-registers of the architecture, and this information is not fully correct on the objfile's gdbarch. Basically, the approach taken was to instead pass the current/selected frame to the parsing and evaluation functions, so that they can extract the gdbarch directly from the frame. It solved the ARM bug reported above, and also contributed to make the API cleaner. Tested on x86_64 and 32-bit ARM. 2013-12-11 Sergio Durigan Junior <sergiodj@redhat.com> * break-catch-throw.c (fetch_probe_arguments): Pass selected frame to get_probe_argument_count and evaluate_probe_argument. * probe.c (get_probe_argument_count): Adjust declaration to accept frame. Pass frame to probe_ops's get_probe_argument_count. (evaluate_probe_argument): Likewise, for evaluate_probe_argument. (probe_safe_evaluate_at_pc): Pass frame to get_probe_argument_count and evaluate_probe_argument. * probe.h (struct probe_ops) <get_probe_argument_count, evaluate_probe_argument>: Adjust declarations to accept frame. (get_probe_argument_count, evaluate_probe_argument): Likewise. * solib-svr4.c (solib_event_probe_action): Get current frame. Pass it to get_probe_argument_count. (svr4_handle_solib_event): Get current frame. Pass it to get_probe_argument_count and evaluate_probe_argument. * stap-probe.c (stap_parse_probe_arguments): Adjust declaration to accept gdbarch. Do not obtain it from the probe's objfile. (stap_get_probe_argument_count): Adjust declaration to accept frame. Obtain gdbarch from the frame. Call generic can_evaluate_probe_arguments. Pass gdbarch to stap_parse_probe_arguments. (stap_get_arg): Adjust declaration to accept gdbarch. Pass it to stap_parse_probe_arguments. (stap_evaluate_probe_argument): Adjust declaration to accept frame. Obtain gdbarch from the frame. Pass gdbarch to stap_get_arg. (stap_compile_to_ax): Pass agent_expr's gdbarch to stap_get_arg. (compute_probe_arg): Obtain gdbarch from frame. Pass frame to get_probe_argument_count and evaluate_probe_argument.	2013-12-10 23:59:00 -02:00
Tom Tromey	37fbcad0be	remove some sym_probe_fns methods ... While looking into the probe API, it seemed to me that there were a number of methods in sym_probe_fns that were not needed. This patch removes them. Specifically, it seems to me that sym_probe_fns ought to be concerned with the API for constructing the probes. Any method relating to some aspect of an individual probe can be handled via the probe's own vtable. That is, the double indirection here doesn't seem useful -- it certainly isn't in fact used, but also I couldn't think of a potential use. 2013-12-06 Tom Tromey <tromey@redhat.com> * break-catch-throw.c (fetch_probe_arguments): Use get_probe_argument_count and evaluate_probe_argument. * elfread.c (elf_get_probe_argument_count) (elf_can_evaluate_probe_arguments, elf_evaluate_probe_argument) (elf_compile_to_ax): Remove. (elf_probe_fns): Update. * probe.c (get_probe_argument_count, can_evaluate_probe_arguments) (evaluate_probe_argument): Call method on probe, not via sym functions. * stap-probe.c (compute_probe_arg): Use get_probe_argument_count, evaluate_probe_argument. (compile_probe_arg): Use get_probe_argument_count. Call method on probe, not via sym functions. * symfile-debug.c (debug_sym_get_probe_argument_count) (debug_can_evaluate_probe_arguments) (debug_sym_evaluate_probe_argument, debug_sym_compile_to_ax): Remove. (debug_sym_probe_fns): Remove. * symfile.h (struct sym_probe_fns) <sym_get_probe_argument_count, can_evaluate_probe_arguments, sym_evaluate_probe_argument, sym_compile_to_ax>: Remove fields.	2013-12-06 08:57:55 -07:00
Tom Tromey	cc16e6c915	PR c++/13588: ... * NEWS: Update. * break-catch-throw.c (struct exception_catchpoint) <exception_rx, pattern>: New fields. (fetch_probe_arguments, dtor_exception_catchpoint) (check_status_exception_catchpoint) (print_one_detail_exception_catchpoint): New functions. (handle_gnu_v3_exceptions): Add "except_rx" argument. Compile regular expression if needed. (extract_exception_regexp): New function. (catch_exception_command_1): Use extract_exception_regexp. (compute_exception): Use fetch_probe_arguments. (initialize_throw_catchpoint_ops): Set dtor, print_one_detail, and check_status fields. * cp-abi.c (cplus_typename_from_type_info): New function. * cp-abi.h (cplus_typename_from_type_info): Declare. (struct cp_abi_ops) <get_typename_from_type_info>: New field. * gdb_regex.h (compile_rx_or_error): Declare. * gnu-v3-abi.c (gnuv3_get_typename_from_type_info): Update comment. (init_gnuv3_ops): Set get_type_from_type_info field. * probe.c (compile_rx_or_error): Move... * utils.c (compile_rx_or_error): ... here. gdb/doc * gdb.texinfo (Set Catchpoints): Document regexp syntax for exception catchpoints. gdb/testsuite * gdb.cp/exceptprint.exp: Add regexp catchpoint tests.	2013-04-15 18:13:01 +00:00
Tom Tromey	72f1fe8a88	PR c++/15176: ... * NEWS: Update. * break-catch-throw.c (compute_exception): New function. (exception_funcs): New global. (_initialize_break_catch_throw): Create $_exception. * cp-abi.c (cplus_type_from_type_info): New function. * cp-abi.h (cplus_type_from_type_info): Declare. (struct cp_abi_ops) <get_type_from_type_info>: New field. * gnu-v3-abi.c (gnuv3_get_typename_from_type_info) (gnuv3_get_type_from_type_info): New functions. (init_gnuv3_ops): Set get_type_from_type_info ABI field. gdb/doc * gdb.texinfo (Set Catchpoints): Document $_exception. (Convenience Vars): Mention $_exception. gdb/testsuite * gdb.base/default.exp: Update for $_exception. * gdb.cp/exceptprint.cc: New file. * gdb.cp/exceptprint.exp: New file. * lib/gdb.exp (skip_libstdcxx_probe_tests): New proc.	2013-04-15 18:09:02 +00:00
Tom Tromey	fc4746a2bd	* break-catch-throw.c (struct exception_names): New. ... (exception_functions): Change type. (re_set_exception_catchpoint): Look for SDT probes.	2013-04-15 18:06:42 +00:00
Tom Tromey	15a73f5615	PR c++/10119: ... * break-catch-throw.c (exception_functions): New global. (gnu_v3_exception_catchpoint_ops): Move earlier. (struct exception_catchpoint): New. (classify_exception_breakpoint): Rewrite. (re_set_exception_catchpoint): New function. (handle_gnu_v3_exceptions): Return void. Use init_catchpoint. Allocate a struct exception_catchpoint. (catch_exception_command_1): Update. (initialize_throw_catchpoint_ops): Set 're_set' method.	2013-04-15 18:05:48 +00:00
Tom Tromey	916703c090	* Makefile.in (SFILES): Add break-catch-throw.c ... (COMMON_OBS): Add break-catch-throw.o. * break-catch-throw.c: New file. * breakpoint.c: Move exception-catching code to new file. (ep_parse_optional_if_clause): No longer static. * breakpoint.h (ep_parse_optional_if_clause): Declare.	2013-04-15 18:04:53 +00:00