* cpu-ia64-opc.c (elf64_ia64_operands}: Fix typo: error string for
C8 said "1" instead of "8". Clarify error string for IMM22:
"signed integer" instead of just "integer".
* config/tc-ia64.c (enum operand_match_result): New type.
(operand_match): Change return type to operand_match_result.
Fix all returns appropriately, adding support for returning the
out-of-range result.
(parse_operands): New locals result, error_pos, out_of_range_pos,
curr_out_of_range_pos. Rewrite operand matching loop to give better
error messages.
* ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
separate variants: one for IMM22 and the other for IMM14.
* ia64-asmtab.c: Regenerate.
* config/tc-ia64.c (struct unwind): Add member "prologue_count".
(dot_proc): Clear unwind.prologue_count to zero.
(dot_prologue): Increment unwind.prologue_count.
(dot_restore): If second operand is omitted, use
unwind.prologue_count -1 for "ecount" (# of additional regions to
pop). Decrement unwind.prologue_count by number of regions
popped.
* configure.in (cpu_type, arch): Add a generic FreeBSD specification as
all FreeBSD platforms should look the same at this level.
* configure: Rebuilt.
* config/tc-i386.c: Add support for old FreeBSD a.out hosts.
Approved by: Philip Blundell <philb@gnu.org>
Message-Id: <E14URxF-00023n-00@kings-cross.london.uk.eu.org>
* config/tc-ia64.c (operand_match, case TAG13): Make a BFD_RELOC_UNUSED
reloc instead of a 0 reloc.
(md_apply_fix3): Check for BFD_RELOC_UNUSED instead of 0, and mark it
as done.
* config/tc-ia64.h (TC_RELOC_RTSYM_LOC_FIXUP): Likewise.
larger.
(relax_frag): Add segment parameter. Only call symbol_get_frag
once. Only call is_dnrange if the symbol is in the same segment,
and the symbol address is larger.
(relax_segment): Pass segment to md_relax_frag and relax_frag.
* write.h (relax_frag): Update declaration.
* config/tc-fr30.c (fr30_relax_frag): Add segment parameter. Pass
it to relax_frag.
* config/tc-m32r.c (m32r_relax_frag): Likewise.
* config/tc-m32r.h (md_relax_frag): Add segment parameter.
(m32r_relax_frag): Update declaration.
* config/tc-mips.h (md_relax_frag): Add segment parameter.
* config/tc-tic54x.h (md_relax_frag): Likewise.
* doc/internals.texi (CPU backend): Update documentation for
md_relax_frag.
instruction sequence consisting of a conditional jump of the
opposite sense around an unconditional jump to the target.
Add jumps/nojumps .arch modifier.
* configure.in: Make 'mipself' and 'mipsecoff' emulations
map to MIPS-specific files, as they used to do before the
change on 2000-05-21.
* configure: Regerate.
(ELF_TC_SPECIAL_SECTIONS): Drop .IA_64.unwind and .IA_64.unwind_info
(they're now handled via ia64_elf_section_type.
* config/tc-ia64.c (unwind): New members saved_text_seg,
saved_text_subseg, and force_unwind_entry.
(optimize_unw_records): New function to optimize away unnecessary
unwind directives.
(ia64_elf_section_type): New function.
(output_unw_records): Generate unwind info only if the size is
non-zero or if it's forced for some other reason (e.g.,
handlerdata or a personality routine).
(generate_unwind_image): Don't switch back to previous
section---stay inside the unwind info section instead so that
handlerdata that may follow goes into the right place.
(dot_handlerdata): Force generation of unwind entry and save the
current active text segment before generating unwind image.
(dot_unwentry): Force generation of unwind entry.
(dot_personality): Ditto.
(dot_endp): Generate unwind table entry only if there is
some unwind info or the unwind entry was forced.
* config/tc-ia64.c (make_unw_section_name): New macro to form
unwind section name.
(generate_unwind_image): Add "text_name" argument. Use it to
form unwind section name.
(dot_handlerdata): Determine current segment (section) name and
pass it to generate_unwind_image().
(dot_endp): Determine current segment (section) name and use
it to determine the appropriate unwind section name.
(ia64_md_do_align): Add missing ATTRIBUTE_UNUSED declarations to
n, fill, and max arguments.
function to select the header according to the cpu.
(md_after_pass_hook, md_do_align): Remove.
(md_cleanup, m68hc11_cleanup): Remove.
(md_pcrel_from_section): Declare.
* config/tc-m68hc11.c (build_dbranch_insn): Remove insn_size.
(build_jump_insn, build_insn): Likewise.
(m68hc11_listing_header): New function.
(m68hc11_cleanup): Remove.
* doc/as.texinfo: Fix spelling and cross-references.
* doc/c-arm.texi: Fix typos. Say that `;' is a line separator
character for all systems, not just GNU/Linux. Make it explicit
that `-k' doesn't affect code generation, just ELF flags.
* tc-i386.c (md_assemble): Return after the error message;
move testing for 64bit operands to proper place.
* i386.exp: Add tests for presence of 32bit versus 64bit output
format; run both 64bit and 32bit tests when format is available;
add x86_64 test.
* x86_64.s: New file.
* x86_64.d: New file.
* doc/as.texinfo: Document '#' as comment character for i386 and
x86_64. Add AMD x86-64 into menu of machine dependent information.
* doc/c-i386.texi: Document x86_64 extensions.
* gas/arm/adrl.s, gas/arm/pic.s, gas/arm/msr-bad.s: New tests.
* gas/arm/arm.exp: Run them.
* gas/arm/adrl.d, gas/arm/pic.d: Expected results for above.
* gas/arm/arm6.s: Also test uppercase `CPSR' and `SPSR'.
(QWORD_MNEM_SUFFIX): New macro.
(CpuK6,CpuAthlon,CpuSledgehammer, Cpu64, CpuNo64, CpuUnknownFlags):
New macros
(CpuMMX,CpuSSE,Cpu3dnow, CpuUnknown): Renumber.
(IgnoreSize, DefaultSize, No_?Suf, FWait, IsString, regKludge, IsPrefix,
ImmExt): Renumber.
(Size64, No_qSuf, NoRex64, Rex64): New macros.
(Reg64, Imm32S, Imm64, Disp32S, Disp64): New macros.
(Imm8, Imm8S, Imm16, Imm32, Imm1, BaseIndex, Disp8, Disp16, Disp32,
InOutPortReg,ShiftCount, Control, Debug, Test, FloatReg, FloatAcc,
SReg2, SReg3, Acc, JumpAbsolute, RegMMX, RegXMM, EsSeg, InvMem): Renumber.
(Reg, WordReg): Add Reg64.
(Imm): Add Imm32S and Imm64.
(EncImm): New.
(Disp): Add Disp64 and Disp32S.
(AnyMem): Add Disp32S.
(RegRex, RegRex64): New macros.
(rex_byte): New type.
* tc-i386.c (set_16bit_code_flag): Kill.
(fits_in_unsigned_long, fits_in_signed_long): New functions.
(reloc): New parameter "signed"; support x86_64.
(set_code_flag): New.
(DEFAULT_ARCH): New macro; default to "i386".
(default_arch): New static variable.
(struct _i386_insn): New fields Operand_PCrel; rex.
(flag_16bit_code): Kill; All tests replaced to "flag_code == CODE_64BIT";
(flag_code): New enum and static variable.
(use_rela_relocations): New static variable.
(flag_code_names): New static variable.
(cpu_arch_flags): Default to CpuUnknownFlags|CpuNo64.
(cpu_arch): Add "sledgehammer"; Add CPUAthlon to Athlon and CpuK6 to
K6 and Athlon.
(i386_align_code): Return plain "nop" for x86_64.
(mode_from_disp_size): Support Disp32S.
(smallest_imm_type): Support Imm32S and Imm64.
(offset_in_range): Support size of 8.
(set_cpu_arch): Do not clobber to Cpu64/CpuNo64.
(md_pseudo_table): Add "code64"; use set_code_flat.
(md_begin): Emit sane error message on hash failure.
(tc_i386_fix_adjustable): Support x86_64 relocations.
(md_assemble): Support QWORD_MNEM_SUFFIX, REX registers,
instructions supported on particular arch just partially,
output of 64bit immediates, handling of Imm32S and Disp32S type.
(i386_immedaite): Support x86_64 relocations; support 64bit constants.
(i386_displacement): Likewise.
(i386_index_check): Cleanup; support 64bit addresses.
(md_apply_fix3): Support x86_64 relocation and rela.
(md_longopts): Add "32" and "64".
(md_parse_option): Add OPTION_32 and OPTION_64.
(i386_target_format): Call even for ELFs; choose between
elf64-x86-64 and elf32-i386.
(i386_validate_fix): Refuse GOTOFF in 64bit mode.
(tc_gen_reloc): Support rela relocations and x86_64.
(intel_e09_1): Support QWORD.
* i386.h (i386_optab): Replace "Imm" with "EncImm".
(i386_regtab): Add flags field.
* config/tc-i386.c (intel_e09_1): Only flag as a memory operand if
it's not an offset expression.
(intel_e10_1): Ditto. Also, if the operand is an offset expression,
keep the braces '[' and ']' in the output string.
(intel_e11): Ditto. Also remove comparison intel_parser.op_modifier
!= FLAT. There is no such op_modifier.
* elfxx-ia64.c (get_dyn_sym_info): Cast %p argument to void *.
* config/tc-ia64.h (ia64_init): Add prototype.
* gas/ia64/dv-imply.d, gas/ia64/dv-mutex.d, gas/ia64/dv-safe.d,
gas/ia64/dv-srlz.d, gas/ia64/opc-m.d: Update.
* ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
argument.
* ia64_gen.c (insert_deplist): Cast sizeof result to int.
(print_dependency_table): Print NULL if semantics field not set.
(insert_opcode_dependencies): Mark cmp parameter as unused.
(print_main_table): Use fprintf_vma to print long long fields.
(main): Mark argv paramter as unused. Convert to old style definition.
* ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
* ia64-asmtab.c: Regnerate.
* dwarf2dbg.c: Enabled only if BFD_ASSEMBLER is defined.
* read.h (outputting_stabs_line_debug): Change it to int.
* stabs.c (outputting_stabs_line_debug): Likewise.
