There is no need for run-time relocation when converting pointers
in .eh_frame section to DW_EH_PE_pcrel encoding. R_386_NONE and
R_X86_64_NONE are expected since the space for run-time relocation
has been allocated. This is an optimization.
PR ld/19972
* testsuite/ld-elf/eh6.d: Pass -rW to readelf and check for
R_386_NONE or R_X86_64_NONE.
This aims to bring the linker for big-endian arc targets into line with
the linker for (the default) little endian arc targets.
The bulk of the changes are to extend the target pattern in the test
files from 'arc-*...' to 'arc*-*...' and so match both big and little
endian arc targets.
In the ld/emulparams/ directory the existing scripts checked for a
variable ARC_ENDIAN to switch between big and little endian targets,
however, this variable is never set up.
So, a new script snippet is introduced which sets up ARC_ENDIAN based on
the value of target, this snippet is then included from all of the
existing arc scripts.
The existing big-endian variants of all the scripts, which existed, but
were never used, are deleted in this commit.
ld/ChangeLog:
* emulparams/arc-endianness.sh: New file.
* emulparams/arcebelf.sh: Deleted.
* emulparams/arcebelf_prof.sh: Deleted.
* emulparams/arceblinux.sh: Deleted.
* emulparams/arceblinux_prof.sh: Deleted.
* emulparams/arcelf.sh: Include arc-endinness.sh.
* emulparams/arcelf_prof.sh: Include arc-endinness.sh.
* emulparams/arclinux.sh: Include arc-endinness.sh.
* emulparams/arclinux_prof.sh: Include arc-endinness.sh.
* emulparams/arcv2elf.sh: Include arc-endinness.sh.
* emulparams/arcv2elfx.sh: Include arc-endinness.sh.
* testsuite/ld-elf/compressed1d.d: Update pattern for big and
little endian arc targets.
* testsuite/ld-elf/eh-frame-hdr.d: Likewise.
* testsuite/ld-elf/group1.d: Likewise.
* testsuite/ld-elf/group3b.d: Likewise.
* testsuite/ld-elf/group8a.d: Likewise.
* testsuite/ld-elf/group8b.d: Likewise.
* testsuite/ld-elf/group9a.d: Likewise.
* testsuite/ld-elf/group9b.d: Likewise.
* testsuite/ld-elf/linkonce2.d: Likewise.
* testsuite/ld-elf/pr12851.d: Likewise.
* testsuite/ld-elf/pr12975.d: Likewise.
* testsuite/ld-elf/pr13177.d: Likewise.
* testsuite/ld-elf/pr13195.d: Likewise.
* testsuite/ld-elf/pr17615.d: Likewise.
* testsuite/ld-elf/pr19162.d: Likewise.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/lib/ld-lib.exp: Likewise.
The options warning_output and error_output to the run_dump_test
function were incorrectly checking the return value from the regexp_diff
function, and so, as a result failing tests were showing as a pass.
Fixed in this commit.
ld/ChangeLog:
* testsuite/lib/ld-lib.exp (run_dump_test): Fix check of return
value from regexp_diff.
* testsuite/ld-elf/orphan-5.l: Fix expected output.
* testsuite/ld-elf/orphan-6.l: Likewise.
Since dynamic sections aren't applicable to relocatable file, don't
create dynamic sections for -E/--dynamic-list when relocatable.
bfd/
PR ld/19789
* elflink.c (elf_link_add_object_symbols): Create dynamic sections
for -E/--dynamic-list only when not relocatable.
ld/
PR ld/19789
* testsuite/ld-elf/pr19789.d: New file.
* testsuite/ld-elf/pr19789.s: Likewise.
Common symbol in executable is a definition, which overrides definition
from shared objects. When linker sees a new definition from a shared
object, the new dynamic definition should be overridden by the previous
common symbol in executable.
bfd/
PR ld/19579
* elflink.c (_bfd_elf_merge_symbol): Treat common symbol in
executable as definition if the new definition comes from a
shared library.
ld/
PR ld/19579
* testsuite/ld-elf/pr19579a.c: New file.
* testsuite/ld-elf/pr19579b.c: Likewise.
* testsuite/ld-elf/shared.exp: Run PR ld/19579 test.
ld-elf/pr19162.d fails for hppa-*-* since Dave Anglin's fix for PR 12376
makes the data segment always start on a page boundary.
* testsuite/ld-elf/pr19162.d: Skip hppa-*-*.
We need to update symbol version for symbols from linker script.
bfd/
PR ld/19698
* elflink.c (bfd_elf_record_link_assignment): Set versioned if
symbol version is unknown.
ld/
PR ld/19698
* testsuite/ld-elf/pr19698.d: New file.
* testsuite/ld-elf/pr19698.s: Likewise.
* testsuite/ld-elf/pr19698.t: Likewise.
Since PR ld/19617 tests require share library support, enable them
only for Linux/GNU/Solaris targets.
* testsuite/ld-elf/pr19617a.d: Enable only for *-*-linux*,
*-*-gnu* and *-*-solaris*.
* testsuite/ld-elf/pr19617b.d: Likewise.
* testsuite/ld-elf/pr19617c.d: Likewise.
In embedded environments, including boot loaders, the non-PIC executable
needs to export its symbols to modules loaded in the future. We should
always create dynamic sections for -E/--dynamic-list.
bfd/
PR ld/19617
* elflink.c (elf_link_add_object_symbols): Always create dynamic
sections for -E/--dynamic-list.
ld/
PR ld/19617
* testsuite/ld-elf/pr19617.s: New file.
* testsuite/ld-elf/pr19617a.d: Likewise.
* testsuite/ld-elf/pr19617b.d: Likewise.
* testsuite/ld-elf/pr19617c.d: Likewise.
Don't add DT_NEEDED if a symbol from a library loaded via DT_NEEDED
doesn't match the symbol referenced by regular object.
bfd/
PR ld/19553
* elflink.c (elf_link_add_object_symbols): Don't add DT_NEEDED
if a symbol from a library loaded via DT_NEEDED doesn't match
the symbol referenced by regular object.
ld/testsuite/
PR ld/19553
* testsuite/ld-elf/indirect.exp: Run tests for PR ld/19553.
* testsuite/ld-elf/pr19553.map: New file.
* testsuite/ld-elf/pr19553.map: Likewise.
* testsuite/ld-elf/pr19553a.c: Likewise.
* testsuite/ld-elf/pr19553b.c: Likewise.
* testsuite/ld-elf/pr19553b.out: Likewise.
* testsuite/ld-elf/pr19553c.c: Likewise.
* testsuite/ld-elf/pr19553c.out: Likewise.
* testsuite/ld-elf/pr19553d.c: Likewise.
* testsuite/ld-elf/pr19553d.out: Likewise.
There is no need to check relocation IFUNC symbol if there are no
dynamic symbols.
bfd/
PR ld/19539
* elf32-i386.c (elf_i386_reloc_type_class): Check relocation
against STT_GNU_IFUNC symbol only with dynamic symbols.
* elf64-x86-64.c (elf_x86_64_reloc_type_class): Likewise.
ld/
PR ld/19539
* testsuite/ld-elf/pr19539.d: New file.
* testsuite/ld-elf/pr19539.s: Likewise.
* testsuite/ld-elf/pr19539.t: Likewise.
Oddly, config.sub converts a duple ending in -elf for these target to
-unknown-none, which means they aren't seen as elf targets by
binutils. So, counter that. This exposes a number of testsuite
issues (ones you would have seen if configuring with a full triple,
say m68hc11-unknown-elf).
binutils/
* testsuite/lib/binutils-common.exp (is_elf_format): Return true
for m68hc11/12 and xgate triples.
gas/
* testsuite/gas/cfi/cfi.exp: Exclude m68hc11/12 from m68k test.
ld/
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Exclude xgate.
* testsuite/ld-elf/endsym.d: xfail m68hc11/12 and xgate.
* testsuite/ld-elf/pr14156a.d: Likewise.
* testsuite/ld-elf/pr14926.d: Don't run for m68hc11/12 and xgate.
* testsuite/ld-elf/sec64k.exp: Likewise.
Run the test for more than just ELF. Shows that objcopy --extract-symbol
isn't working on PE, mips, mmix and some aout targets.
* config/default.exp (size): New global.
* ld-elf/extract-symbol-1.s,
* ld-elf/extract-symbol-1.ld,
* ld-elf/extract-symbol-1sec.d,
* ld-elf/extract-symbol-1sym.d: Delete.
* ld-scripts/script.exp (extract_symbol_test): New.
We may see an unversioned definition after the default version. We
should skip the unversioned definition in this case.
bfd/
PR ld/19073
* elflink.c (_bfd_elf_add_default_symbol): Skip the unversioned
definition after the default version.
ld/testsuite/
PR ld/19073
* ld-elf/pr19073.map: New file.
* ld-elf/pr19073.rd: Likewise.
* ld-elf/pr19073.s: Likewise.
* ld-elf/shared.exp (build_tests): Add tests for PR ld/19073.
For ELF linker, a common symbol isn't a definition. When we decide if a
symbol should be re-exported, we should check if the symbol isn't
undefined, not if it is a definition.
bfd/
PR ld/18914
* elflink.c (elf_link_add_object_symbols): Don't re-export a
symbol if it isn't undefined.
ld/testsuite/
PR ld/18914
* ld-elf/exclude.exp: Also check exclude_common.
* ld-elf/exclude2.s: Add exclude_common.
In objcopy, copy_object calls copy_section to copy contents of input
section to output section. When --gap-fill= is used, objcopy extends
the size of output sectios to fill gaps between output sections with
gap fills. In this case, we adjust the output section size to skip
gap files to avoid reading beypond the input section buffer before
calling copy_section and restore the output section size after input
sections have been copied.
binutils/
PR binutils/19005
* objcopy.c (copy_object): Adjust the output section size to
skip gap fills between sections when copying from input sections
to output sections.
ld/testsuite/
PR binutils/19005
* ld-elf/pr19005.d: New file.
* ld-elf/pr19005.s: Likewise.
* ld-elf/pr19005.t: Likewise.
gas PR ld/18759
* config/tc-or1k.c (tc_gen_reloc): Correct computation of PC
relative relocs.
* config/tc-or1k.h (GAS_CGEN_PRCEL_R_TYPE): Delete.
bfd * elf32-or1k.c (R_OR1K_32_PCREL): Set pcrel_offset to TRUE.
(R_OR1K_16_PCREL): Likewise.
(R_OR1K_8_PCREL): Likewise.
ld/tests * ld-elf/eh-frame-hdr: Expect to pass on the or1k-linux target.
Giving linker script symbols defined outside of output sections a
section-relative value early, leads to them being used in expressions
as if they were defined inside an output section. This can mean loss
of the section VMA, and wrong results.
ld/
PR ld/18963
* ldexp.h (struct ldexp_control): Add rel_from_abs.
(ldexp_finalize_syms): Declare.
* ldexp.c (new_rel_from_abs): Keep absolute for expressions
outside of output section statements. Set rel_from_abs.
(make_abs, exp_fold_tree, exp_fold_tree_no_dot): Clear rel_from_abs.
(struct definedness_hash_entry): Add final_sec, and comment.
(update_definedness): Set final_sec.
(set_sym_sections, ldexp_finalize_syms): New functions.
* ldlang.c (lang_process): Call ldexp_finalize_syms.
ld/testsuite
PR ld/18963
* ld-scripts/pr18963.d,
* ld-scripts/pr18963.t: New test.
* ld-scripts/expr.exp: Run it.
* ld-elf/provide-hidden-2.ld: Explicitly make "dot" absolute.
* ld-mips-elf/gp-hidden.sd: Don't care about _gp section.
* ld-mips-elf/no-shared-1-n32.d: Don't care about symbol shown at
start of .data section.
* ld-mips-elf/no-shared-1-n64.d: Likewise.
* ld-mips-elf/no-shared-1-o32.d: Likewise.
The new orphan handling tests added in commit c005eb9 fail on a range of
targets. Some of the failures were fixed in commit e32aa93 but not
all. This commit should address the remaining failures.
Update results to account for orphan sections being placed in different
orders, and for other, target specific sections, being discarded.
ld/testsuite/ChangeLog:
* ld-elf/orphan-7.map: Allow for other discarded sections.
* ld-elf/orphan-8.map: Updated to allow for different section
ordering on different targets.
* ld-elf/orphan.ld: Place .sbss section.
Replace the options --warn-orphan and --no-warn-orphan with a single
option --orphan-handling=MODE, where mode can be place, warn, error, and
discard.
Mode 'place' is the default, and is the current behaviour, placing the
orphan section into a suitable output section.
Mode 'warn' is the same as '--warn-orphan'. The orphan is also placed
using the same algorithm as for 'place'.
Mode 'error' is the same as '--warn-orphan' and '--fatal-warnings'.
Mode 'discard' assigns all output sections to the /DISCARD/ section.
ld/ChangeLog:
* ld.h (enum orphan_handling_enum): New.
(ld_config_type): Remove warn_orphan, add orphan_handling.
* ldemul.c (ldemul_place_orphan): Remove warning about orphan
sections.
* ldlang.c (ldlang_place_orphan): New function.
(lang_place_orphans): Call ldlang_place_orphan.
* ldlex.h (enum option_values): Remove OPTION_WARN_ORPHAN and
OPTION_NO_WARN_ORPHAN, add OPTION_ORPHAN_HANDLING.
* lexsup.c (ld_options): Remove 'warn-orphan' and
'no-warn-orphan', add 'orphan-handling'.
(parse_args): Remove handling for OPTION_WARN_ORPHAN and
OPTION_NO_WARN_ORPHAN, add handling for OPTION_ORPHAN_HANDLING.
* NEWS: Replace text about --warn-orphan with --orphan-handling.
* ld.texinfo (Options): Remove --warn-orphan entry and add
entry on --orphan-handling.
(Orphan Sections): Add reference to relevant command line options.
ld/testsuite/ChangeLog:
* ld-elf/elf.exp: Switch to rely on run_dump_test.
* ld-elf/orphan-5.l: Update expected output.
* ld-elf/orphan-5.d: New file.
* ld-elf/orphan-6.d: New file.
* ld-elf/orphan-6.l: New file.
* ld-elf/orphan-7.d: New file.
* ld-elf/orphan-7.map: New file.
* ld-elf/orphan-8.d: New file.
* ld-elf/orphan-8.map: New file.
The hidden versioned symbol can only be merged with the versioned
symbol with the same symbol version. _bfd_elf_merge_symbol should
check the symbol version before merging the new hidden versioned
symbol with the existing symbol. _bfd_elf_link_hash_copy_indirect can't
copy any references to the hidden versioned symbol. We need to
bind a symbol locally when linking executable if it is locally defined,
hidden versioned, not referenced by shared library and not exported.
bfd/
PR ld/18720
* elflink.c (_bfd_elf_merge_symbol): Add a parameter to indicate
if the new symbol matches the existing one. The new hidden
versioned symbol matches the existing symbol if they have the
same symbol version. Update the existing symbol only if they
match.
(_bfd_elf_add_default_symbol): Update call to
_bfd_elf_merge_symbol.
(_bfd_elf_link_assign_sym_version): Don't set the hidden field
here.
(elf_link_add_object_symbols): Override a definition only if the
new symbol matches the existing one.
(_bfd_elf_link_hash_copy_indirect): Don't copy any references to
the hidden versioned symbol.
(elf_link_output_extsym): Bind a symbol locally when linking
executable if it is locally defined, hidden versioned, not
referenced by shared library and not exported. Turn on
VERSYM_HIDDEN only if the hidden vesioned symbol is defined
locally.
ld/testsuite/
PR ld/18720
* ld-elf/indirect.exp: Run tests for PR ld/18720.
* ld-elf/pr18720.out: New file.
* ld-elf/pr18720a.c: Likewise.
* ld-elf/pr18720b.c: Likewise.
* ld-elf/pr18720c.c: Likewise.
We should change the default symbol for the versioned symbol only when
not performing a relocatable link.
bfd/
PR ld/18735
* elflink.c (_bfd_elf_add_default_symbol): Add the default
symbol if not performing a relocatable link.
(elf_link_add_object_symbols): Adjust the default symbol if
not performing a relocatable link.
ld/testsuite/
PR ld/18735
* ld-elf/pr18735.d: New file.
* ld-elf/pr18735.s: Likewise.
noclone attribute was added to GCC 4.5. We should check GCC version
before using it.
* ld-elf/pr18718.c (bar): Use noclone attribute only for GCC
4.5 or newer.
Since GCC 5 folds symbol address comparison, assuming each symbol has a
different address, &foo == &bar is always false for GCC 5. This patch
adds check_ptr_eq if 2 addresses are the same and uses it to check the
address of versined symbol.
PR ld/18718
* ld-elf/check-ptr-eq.c: New file.
* ld-elf/pr18718.c (main): Call check_ptr_eq.
* ld-elf/shared.exp: Add check-ptr-eq.c to PR ld/18718 tests.
Missing symbol version section is a run-time problem only if it will
be referenced dynamically at run-time. We should skip the check for
locally defined symbol, which isn't referenced by shared library, when
linking executable.
bfd/
PR ld/18718
* elflink.c (elf_link_output_extsym): Check symbol version
section check only if not linking executable, the symbol is
referenced by shared library or not locally defined.
ld/testsuite/
PR ld/18718
* ld-elf/pr18718.c: New file.
* ld-elf/shared.exp: Run tests for PR ld/18718.
For selected targets. The testcase reveals a number of targets that
still need fixing.
bfd/
* elf32-arm.c (elf32_arm_final_link_relocate): Use SYMBOLIC_BIND to
check if a symbol should be bound symbolically.
* elf32-hppa.c (elf32_hppa_check_relocs,
elf32_hppa_adjust_dynamic_symbol, elf32_hppa_relocate_section,
elf32_hppa_finish_dynamic_symbol): Likewise.
* elf32-m68k.c (elf_m68k_check_relocs,
elf_m68k_relocate_section): Likewise.
* elf32-nios2.c (nios2_elf32_relocate_section,
nios2_elf32_check_relocs, allocate_dynrelocs): Likewise.
* elf32-tic6x.c (elf32_tic6x_finish_dynamic_symbol,
elf32_tic6x_relocate_section): Likewise.
ld/testsuite/
* ld-elf/symbolic-func.s,
* ld-elf/symbolic-func.r: New test.
* ld-elf/elf.exp: Run it.
Use -ggdb3 to generate .debug_macro sections, which are bigger and are
always compressed.
* ld-elf/compress.exp (build_tests): Replace -g with -ggdb3.
* ld-elf/zlibbegin.rS: Also expect "GC".
* ld-elf/zlibnormal.rS: Likewise.
All programs in binutils+gdb git repo now support gABI compression
with the SHF_COMPRESSED bit. This patch makes the zlib-gabi option
as compression default for gas, gold, ld and objcopy, instead of the
zlib-gnu option whose outputs are incompatible with gABI.
binutils/
* objcopy.c (copy_file): Set BFD_COMPRESS_GABI if not
zlib-gnu.
* doc/binutils.texi: Change --compress-debug-sections and
--compress-debug-sections=zlib to zlib-gabi.
binutils/testsuite/
* binutils-all/compress.exp: Update.
gas/
* as.c (parse_args): Make --compress-debug-sections and
--compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* doc/as.texinfo: Change --compress-debug-sections and
--compress-debug-sections=zlib to zlib-gabi.
gold/
* compressed_output.cc (Output_compressed_section::set_final_data_size):
Make --compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* testsuite/Makefile.am (flagstest_compress_debug_sections.check):
Expect ".debug_.*" with the SHF_COMPRESSED bit, instead of
".zdebug_".
* testsuite/Makefile.in: Regenerated.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Make
--compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* ld.texinfo: Change --compress-debug-sections=zlib to zlib-gabi.
ld/testsuite/
* ld-elf/zlibbegin.rS: Updated to .debug_.* with the
SHF_COMPRESSED bit.
* ld-elf/zlibnormal.rS: Likewise.
Since not all ELF targets support -shared, we limit ld-elf/strtab to
linux and gnu targets.
* ld-elf/strtab.d: Only run on *-*-linux* and *-*-gnu* targets.
This patch uses ELF strtab with GC and suffix merging support to create
ELF .strtab section. There is some small memory overhead to use ELF
strtab:
==14928== HEAP SUMMARY:
==14928== in use at exit: 3,276,318 bytes in 679 blocks
==14928== total heap usage: 1,544 allocs, 865 frees, 15,259,146 bytes allocated
vs.
==14936== HEAP SUMMARY:
==14936== in use at exit: 3,276,318 bytes in 679 blocks
==14936== total heap usage: 1,532 allocs, 853 frees, 15,026,402 bytes allocated
when running:
./ld-new -m elf_x86_64 -o tmpdir/ld-partial.o -r ldgram.o ldlex-wrapper.o lexsup.o ldlang.o mri.o ldctor.o ldmain.o plugin.o ldwrite.o ldexp.o ldemul.o ldver.o ldmisc.o ldfile.o ldcref.o eelf_x86_64.o eelf32_x86_64.o eelf_i386.o eelf_iamcu.o ei386linux.o eelf_l1om.o eelf_k1om.o ldbuildid.o
The results are
[32] .strtab STRTAB 0+ 3beff8 00407a 00 0 0 1
vs
[32] .strtab STRTAB 0+ 3beff8 0041d8 00 0 0 1
It reduces the .strtab size by 350 bytes, about 2%
Saving on libc.so from glibc is much more since libc.so has many alias
symbols with the same suffix. For x32 glibc,
[82] .strtab STRTAB 0+ 81b348 0159e7 00 0 0 1
vs
[82] .strtab STRTAB 0+ 81b8bc 019e72 00 0 0 1
It reduces the .strtab size by 17547 bytes, about 16%.
bfd/
PR gas/18451
* elf-bfd.h (elf_sym_strtab): New.
(elf_link_hash_table): Add strtabcount, strtabsize and
strtab.
(_bfd_elf_stringtab_init): Removed.
* elf.c (_bfd_elf_stringtab_init): Removed.
(_bfd_elf_compute_section_file_positions): Replace
bfd_strtab_hash/_bfd_elf_stringtab_init/_bfd_stringtab_free/
_bfd_stringtab_size with
elf_strtab_hash/_bfd_elf_strtab_init/_bfd_elf_strtab_free/
_bfd_elf_strtab_size. Use _bfd_elf_strtab_add,
_bfd_elf_strtab_finalize and _bfd_elf_strtab_offset to get
st_name.
(swap_out_syms): Likewise.
* elflink.c (elf_final_link_info): Replace bfd_strtab_hash
with elf_strtab_hash. Remove symbuf, symbuf_count,
symbuf_size and shndxbuf_size.
(elf_link_flush_output_syms): Removed.
(elf_link_output_sym): Renamed to ...
(elf_link_output_symstrtab): This. Replace _bfd_stringtab_add
with _bfd_elf_strtab_add. Don't flush symbols to the file nor
swap out symbols.
(elf_link_swap_symbols_out): New.
(elf_link_output_extsym): Replace elf_link_output_sym with
elf_link_output_symstrtab.
(elf_link_input_bfd): Likewise.
(elf_final_link_free): Replace _bfd_stringtab_free with
_bfd_elf_strtab_free. Remove symbuf.
(bfd_elf_final_link): Replace _bfd_elf_stringtab_init with
_bfd_elf_strtab_init. Don't set symbuf, symbuf_count,
symbuf_size nor shndxbuf_size. Initialize strtabsize and
strtab. Initialize symshndxbuf to -1 when number of sections
>= 64K. Replace elf_link_output_sym/elf_link_output_sym with
elf_link_output_symstrtab/elf_link_output_symstrtab. Don't
call elf_link_flush_output_syms. Call _bfd_elf_strtab_finalize
and elf_link_swap_symbols_out. Replace _bfd_stringtab_size
and _bfd_stringtab_emit with _bfd_elf_strtab_size and
_bfd_elf_strtab_emit.
gas/testsuite/
PR gas/18451
* gas/elf/elf.exp: Run strtab.
* gas/elf/strtab.d: New file.
* gas/elf/strtab.s: Likewise.
ld/testsuite/
PR gas/18451
* ld-elf/strtab.d: New file.
* ld-elf/strtab.s: Likewise.
When pointer equality needed, we can't replace PLT relocations with
GOT relocations for -z now. This patch checks if pointer equality is
needed before converting PLT relocations to GOT relocations.
bfd/
PR binutils/18458
* elf32-i386.c (elf_i386_check_relocs): Create .plt.got section
for now binding only if pointer equality isn't needed.
(elf_i386_allocate_dynrelocs): Use .plt.got section for now
binding only if pointer equality isn't needed.
* elf64-x86-64.c (elf_x86_64_check_relocs): Create .plt.got
section for now binding only if pointer equality isn't needed.
(elf_x86_64_allocate_dynrelocs): Use .plt.got section for now
binding only if pointer equality isn't needed.
ld/testsuite/
PR binutils/18458
* ld-elf/shared.exp (build_tests): Build libpr18458a.so and
libpr18458b.so.
(run_tests): Run pr18458 test.
* ld-elf/pr18458a.c: New file.
* ld-elf/pr18458b.c: Likewise.
* ld-elf/pr18458c.c: Likewise.
When we set up st_name for output section name in elf_fake_sections, we
don't know if the compressed DWARF debug section will be smaller. We may
end up with compressed DWARF debug sections which are bigger than the
uncompressed ones. This patch delays setting up st_name for output DWARF
debug section to _bfd_elf_assign_file_positions_for_non_load which will
compress the output debug section. We also postpone placement of shstrtab
section after DWARF debug sections have been compressed. The net effect
is .shstrtab section is now placed after .symtab and .strtab sections.
bfd/
PR ld/18277
* compress.c (bfd_compress_section_contents): Remove the
write_compress argument.
(bfd_init_section_compress_status): Updated.
(bfd_compress_section): Likewise.
* elf.c (_bfd_elf_set_reloc_sh_name): New.
(_bfd_elf_init_reloc_shdr): Add delay_st_name_p. Set sh_name
to (unsigned int) -1 if delay_st_name_p is TRUE. Use
_bfd_elf_set_reloc_sh_name.
(elf_fake_sections): Don't rename DWARF debug section for
linker output if it will be compressed. Instead, set
delay_st_name_p to TRUE and pass it to _bfd_elf_init_reloc_shdr.
(assign_section_numbers): Call _bfd_elf_strtab_addref only if
sh_name != (unsigned int) -1. Don't finalize nor assign
shstrtab section here. Delay setting output section names to
_bfd_elf_write_object_contents.
(_bfd_elf_compute_section_file_positions): Update comments on
sh_offset for shstrtab section.
(assign_file_positions_for_non_load_sections): Set sh_offset to
-1 for shstrtab section.
(assign_file_positions_except_relocs): Likewise.
(_bfd_elf_assign_file_positions_for_non_load): Set up sh_name
when compressing DWARF debug sections. Place shstrtab section
after DWARF debug sections have been compressed.
(_bfd_elf_write_object_contents): Setting sh_name for output
sections.
ld/testsuite/
PR ld/18277
* ld-elf/compressed1d.d: New.
* ld-elf/compressed1e.d: Likewise.
This patch adds --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi]
to ld for ELF targets to support generating compressed DWARF debug
sections. We always generate .zdebug_* section since section names have
been finalized and they can't be changed easily when compression is
being performed.
bfd/
* bfd-in.h (compressed_debug_section_type): New.
* compress.c (bfd_compress_section_contents): Add an argument
for linker write compression and always generate .zdebug_*
section when linking.
(bfd_init_section_compress_status): Pass FALSE to
bfd_compress_section_contents.
(bfd_compress_section): New function.
* elf.c (elf_fake_sections): For linking, set SEC_ELF_COMPRESS
on DWARF debug sections if COMPRESS_DEBUG is set and rename
section if COMPRESS_DEBUG_GABI_ZLIB isn't set.
(assign_file_positions_for_non_load_sections): Set sh_offset
to -1 if SEC_ELF_COMPRESS is set.
(assign_file_positions_except_relocs): Likwise.
(_bfd_elf_assign_file_positions_for_relocs): Renamed to ...
(_bfd_elf_assign_file_positions_for_non_load): This. Change
return time to bfd_boolean. Compress the section if
SEC_ELF_COMPRESS is set.
(_bfd_elf_write_object_contents): Updated.
(_bfd_elf_set_section_contents): Write section contents to
the buffer if SEC_ELF_COMPRESS is set.
* merge.c: Include "elf-bfd.h".
(sec_merge_emit): Add arguments for contents and offset. Write
to contents with offset if contents isn't NULL.
(_bfd_write_merged_section): Write section contents to the
buffer if SEC_ELF_COMPRESS is set. Pass contents and
output_offset to sec_merge_emit.
* elflink.c (bfd_elf_final_link): Allocate the buffer for
output section contents if SEC_ELF_COMPRESS is set.
* section.c (SEC_ELF_COMPRESS): New.
* bfd-in2.h: Regenerated.
gas/
* as.h (compressed_debug_section_type): Removed.
include/
* bfdlink.h (bfd_link_info): Add compress_debug.
ld/
* ld.texinfo: Document --compress-debug-sections=.
* ldmain.c (main): Set BFD_COMPRESS on output_bfd if
COMPRESS_DEBUG is set. Set BFD_COMPRESS_GABI on output_bfd
for COMPRESS_DEBUG_GABI_ZLIB.
* lexsup.c (elf_static_list_options): Add
--compress-debug-sections=.
* emultempl/elf32.em (OPTION_COMPRESS_DEBUG): New.
(xtra_long): Add "compress-debug-sections".
(gld${EMULATION_NAME}_handle_option): Handle
OPTION_COMPRESS_DEBUG.
ld/testsuite/
* ld-elf/compress.exp (build_tests): Add tests for
--compress-debug-sections=.
(run_tests): Likewise.
Add additonal tests for --compress-debug-sections=.
* ld-elf/gabiend.rt: New file.
* ld-elf/gabinormal.rt: Likewise.
* ld-elf/gnubegin.rS: Likewise.
* ld-elf/gnunormal.rS: Likewise.
* ld-elf/zlibbegin.rS: Likewise.
* ld-elf/zlibnormal.rS: Likewise.
This patch adds --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}
options to gas and objcopy for ELF files. They control how DWARF debug
sections are compressed. --compress-debug-sections=none is equivalent to
--nocompress-debug-sections. --compress-debug-sections=zlib and
--compress-debug-sections=zlib-gnu are equivalent to
--compress-debug-sections. --compress-debug-sections=zlib-gabi compresses
DWARF debug sections with SHF_COMPRESSED from the ELF ABI. No linker
changes are required to support SHF_COMPRESSED.
bfd/
* archive.c (_bfd_get_elt_at_filepos): Also copy BFD_COMPRESS_GABI
bit.
* bfd.c (bfd::flags): Increase size to 18 bits.
(BFD_COMPRESS_GABI): New.
(BFD_FLAGS_SAVED): Add BFD_COMPRESS_GABI.
(BFD_FLAGS_FOR_BFD_USE_MASK): Likewise.
(bfd_update_compression_header): New fuction.
(bfd_check_compression_header): Likewise.
(bfd_get_compression_header_size): Likewise.
(bfd_is_section_compressed_with_header): Likewise.
* compress.c (MAX_COMPRESSION_HEADER_SIZE): New.
(bfd_compress_section_contents): Return the uncompressed size if
the full section contents is compressed successfully. Support
converting from/to .zdebug* sections.
(bfd_get_full_section_contents): Call
bfd_get_compression_header_size to get compression header size.
(bfd_is_section_compressed): Renamed to ...
(bfd_is_section_compressed_with_header): This. Add a pointer
argument to return compression header size.
(bfd_is_section_compressed): Use it.
(bfd_init_section_decompress_status): Call
bfd_get_compression_header_size to get compression header size.
Return FALSE if uncompressed section size is 0.
* elf.c (_bfd_elf_make_section_from_shdr): Support converting
from/to .zdebug* sections.
* bfd-in2.h: Regenerated.
binutils/
* objcopy.c (do_debug_sections): Add compress_zlib,
compress_gnu_zlib and compress_gabi_zlib.
(copy_options): Use optional_argument on compress-debug-sections.
(copy_usage): Update --compress-debug-sections.
(copy_file): Handle compress_zlib, compress_gnu_zlib and
compress_gabi_zlib.
(copy_main): Handle
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* doc/binutils.texi: Document
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
binutils/testsuite/
* compress.exp: Add tests for
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* binutils-all/dw2-3.rS: New file.
* binutils-all/dw2-3.rt: Likewise.
* binutils-all/libdw2-compressedgabi.out: Likewise.
gas/
* as.c (show_usage): Update --compress-debug-sections.
(std_longopts): Use optional_argument on compress-debug-sections.
(parse_args): Handle
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* as.h (compressed_debug_section_type): New.
(flag_compress_debug): Change type to compressed_debug_section_type.
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* write.c (compress_debug): Set BFD_COMPRESS_GABI for
--compress-debug-sections=zlib-gabi. Call
bfd_get_compression_header_size to get compression header size.
Don't rename section name for --compress-debug-sections=zlib-gabi.
* config/tc-i386.c (compressed_debug_section_type): Set to
COMPRESS_DEBUG_ZLIB.
* doc/as.texinfo: Document
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
gas/testsuite/
* gas/i386/dw2-compressed-1.d: New file.
* gas/i386/dw2-compressed-2.d: Likewise.
* gas/i386/dw2-compressed-3.d: Likewise.
* gas/i386/x86-64-dw2-compressed-2.d: Likewise.
* gas/i386/i386.exp: Run dw2-compressed-2, dw2-compressed-1,
dw2-compressed-3 and x86-64-dw2-compressed-2.
ld/testsuite/
* ld-elf/compress.exp: Add a test for
--compress-debug-sections=zlib-gabi.
(build_tests): Add 2 tests for --compress-debug-sections=zlib-gabi.
(run_tests): Likewise.
Verify linker output with zlib-gabi compressed debug input.
* ld-elf/compressed1a.d: New file.
* ld-elf/compressed1b.d: Likewise.
* ld-elf/compressed1c.d: Likewise.
ld * ld.h (struct ld_config_type): Add new field: warn_orphan.
* ldlex.h (enum option_values): Add OPTION_WARN_ORPHAN and
OPTION_NO_WARN_ORPHAN.
* lexsup.c (ld_options): Add --warn-orphan and --no-warn-orphan.
(parse_args): Handle the new options.
* ldemul.c (ldemul_place_orphan): If requested, generate a warning
message when an orphan section is placed in the output file.
* ld.texinfo: Document the new option.
* NEWS: Mention the new feature.
tests * ld-elf/orphan-5.l: New test - checks the linker's output with
--warn-orphan enabled.
* ld-elf/elf.exp: Run the new test.
Since .rela.plt/rel.plt section may contain relocations against .got.plt
section, we set sh_info for .rela.plt/rel.plt section to .got.plt section
index if target has .got.plt section.
bfd/
PR ld/18169
* elf-bfd.h (elf_backend_data): Add get_reloc_section.
(_bfd_elf_get_reloc_section): New.
* elf.c (_bfd_elf_get_reloc_section): Likewise.
(assign_section_numbers): Call get_reloc_section to look up the
section the relocs apply.
* elfxx-target.h (elf_backend_get_reloc_section): Likewise.
(elfNN_bed): Initialize get_reloc_section with
elf_backend_get_reloc_section.
ld/testsuite/
PR ld/18169
* ld-elf/linkinfo1a.d: Updated.
* ld-elf/linkinfo1b.d: Likewise.
bfd * elf32-v850.c (v850_set_note): New function. Creates a Renesas
style note entry.
(v850_elf_make_note_section): New function. Creates a note
section.
(v850_elf_create_sections): New function. Create a note section
if one is not already present.
(v850_elf_set_note): New function. Adds a note to a bfd.
(v850_elf_copy_private_bfd_data): New function. Copies V850
notes.
(v850_elf_merge_notes): New function. Merges V850 notes.
(print_v850_note): New function. Displays a V850 note.
(v850_elf_print_notes): New function. Displays all notes attached
to a bfd.
(v850_elf_merge_private_bfd_data): Call v850_elf_merge_notes.
(v850_elf_print_private_bfd_data): Call v850_elf_print_notes.
(v850_elf_fake_sections): Set the type of the V850 note section.
* bfd-in.h (v850_elf_create_sections): Add prototype.
(v850_elf_set_note): Add prototype.
* bfd-in2.h: Regenerate.
binutils* readelf.c (get_machine_flags): Remove deprecated V850 machine
flags.
(get_v850_section_type_name): New function. Handles V850 special
sections.
(get_section_type_name): Add support for V850.
(get_v850_elf_note_type): New function. Returns the name of a
V850 note.
(print_v850_note): New function. Prints a V850 note.
(process_v850_notes): New function. Prints V850 notes.
(process_note_sections): Add support for V850.
binutils/testsute
* binutils-all/objcopy.exp: Skip the strip-10 test for the V850.
gas * config/tc-v850.c (soft_float): New variable.
(v850_data_8): New variable.
(md_show_usage): Add -msoft-float/-mhard-float.
(md_parse_option): Likewise.
(md_begin): Set the default value of soft_float.
(v850_md_end): New function. Creates a note section.
* config/tc-v850.h (md_end): Define.
* doc/c-v850.texi: Document -msoft-float/-mhard-float.
gas/testsuite
* gas/elf/elf.exp: Add special version of the section2 test for
the V850.
* gas/elf/section2.e-v850: New file.
include/elf
* v850.h (EF_RH850_SIMD): Delete deprecated flag.
(EF_RH850_CACHE): Likewise.
(EF_RH850_MMU): Likewise.
(EF_RH850_DATA_ALIGN8): Likewise.
(SHT_RENESAS_IOP): Fix typo in name.
(SHT_RENESAS_INFO): Define.
(V850_NOTE_SECNAME): Define.
(SIZEOF_V850_NOTE): Define.
(V850_NOTE_NAME): Define.
(enum v850_notes): New enum.
(NUM_V850_NOTES): Define.
ld/ChangeLog
2015-02-24 Nick Clifton <nickc@redhat.com>
* Makefile.am (ev850.c): Add dependency upon
$(srcdir)/emultempl/v850elf.em.
(ev850_rh850.c): Likewise.
* Makefile.in: Regenerate.
* emultempl/v850elf.em: New file.
* emulparams/v850.sh (EXTRA_EM_FILE): Define.
* emulparams/v850_rh850.sh (EXTRA_EM_FILE): Define.
* scripttempl/v850.sc: Add .note.renesas section.
* scripttempl/v850_rh850.sc: Likewise.
ld/testsuite
* ld-elf/extract-symbol-1sec.d: Expect to fail on the V850.
"f1" is a register name on ia64, and hence gets warned upon when used
as expression value:
.../binutils/2.25/ld/testsuite/ld-elf/pr16322.s: Assembler messages:
.../binutils/2.25/ld/testsuite/ld-elf/pr16322.s:6: Warning: register value used as expression
Change the name (and "p1" at once, which is a register name too, albeit
not currently causing any immediate problem).
ld/testsuite/
2015-01-28 Jan Beulich <jbeulich@suse.com>
* ld-elf/pr16322.s (p1): Rename to px1.
(f1): Rename to fx1.
bfd/
PR ld/17773
* elflink.c (bfd_elf_final_link): Assign the file position for
the symbol string table only there are symbols to be emitted.
ld/testsuite/
PR ld/17773
* ld-elf/binutils.exp (binutils_test): Add an optional
readelf_options. Replace -l with $readelf_options. Add a
gap test.
* ld/testsuite/ld-elf/gap.s: New file.
Both readelf/objdump know how to get symbol version string for dynamic
symbols. This patch extracts this functionality into a separate
function and uses it to add symbol version string to versioned symbol
names when dumping dynamic relocations.
bfd/
PR binutils/16496
* elf-bfd.h (bfd_elf_get_symbol_version_string): New.
* elf.c (bfd_elf_get_symbol_version_string): New. Extracted
from bfd_elf_print_symbol.
(bfd_elf_print_symbol): Use it.
binutils/
PR binutils/16496
* objdump.c (objdump_print_symname): Call
bfd_elf_get_symbol_version_string to get ELF symbol version
string. Append version string if needed.
* readelf.c (versioned_symbol_info): New enum.
(get_symbol_version_string): New. Extracted from
process_symbol_table.
(dump_relocations): Add a new argument to indicate if dynamic
symbol table is used. Use get_symbol_version_string to get
symbol version string for dynamic symbol. Append version string
if needed.
(process_relocs): Updated dump_relocations call.
(process_symbol_table): Use get_symbol_version_string.
ld/testsuite/
PR binutils/16496
* ld-cris/weakref3.d: Add symbol version string to versioned
symbol names in dynamic relocation.
* ld-cris/weakref4.d: Likewise.
* ld-elfvers/vers24.rd: Likewise.
* ld-elf/pr16496a.c: New file.
* ld-elf/pr16496a.map: Likewise.
* ld-elf/pr16496b.c: Likewise.
* ld-elf/pr16496b.od: Likewise.
* ld-elf/shared.exp (build_tests): Add libpr16496a.so and
libpr16496b.so tests.
These are useless because they can't match any address. In fact,
worse than useless because the .eh_frame_hdr lookup table matching
addresses to FDEs does not contain information about the FDE range.
The table is sorted by address; Range is inferred by the address
delta from one entry to the next. So if a zero address range FDE is
followed by a normal non-zero range FDE for the same address,
everything is good. However, the qsort could just as easily sort the
FDEs in the other order, in which case the normal FDE would
effectively be seen to have a zero range.
bfd/
PR 17447
* elf-bfd.h (struct eh_cie_fde): Comment re NULL u.fde.cie_inf.
* elf-eh-frame.c (_bfd_elf_parse_eh_frame): Mark zero address
range FDEs for discarding.
(vma_compare): Sort on range after address.
(_bfd_elf_gc_mark_fdes): Test for NULL u.fde.cie_inf.
(_bfd_elf_discard_section_eh_frame): Likewise. Write "FDE" in
error message rather than "fde".
(_bfd_elf_write_section_eh_frame_hdr): Write "PC" and "FDE" in
error message.
ld/testsuite/
* ld-elf/eh1.s: Don't create FDEs with zero address ranges.
* ld-elf/eh3.s: Likewise.
* ld-elf/eh1.d, * ld-elf/eh2.d, * ld-elf/eh3.d: Adjust.
* ld-mips-elf/eh-frame1-n32.d: Warning match update.
* ld-mips-elf/eh-frame1-n64.d: Likewise.
* ld-mips-elf/eh-frame2-n32.d: Likewise.
* ld-mips-elf/eh-frame2-n64.d: Likewise.
Resolves PR 17312
* ld-aarch64/eh-frame-foo.s: Use 8-byte offset for X30.
* ld-aarch64/eh-frame-bar.s: Likewise.
* ld-aarch64/eh-frame.d: Updated to match current readelf output.
* ld-elf/eh5.d: Allow any register names.
PR 17287
bfd/
* elflink.c (on_needed_list): Only consider libraries that have
been loaded.
ld/
* ld.texinfo (--as-needed): Clarify that references from libraries
must be from needed libraries.
ld/testsuite/
* ld-plugin/needed3.c: New file.
* ld-elf/shared.exp: Add needed3 test.
Various ld-elf/shared.exp and ld-plugin/lto.exp tests simply appended
the testsuite -B options intended to force gcc use the linker under test.
This fails if $CC itself has -B options, as when setting CC to run gcc
out of a build directory. Net result is that tests were run using
the gcc build dir collect-ld.
* config/default.exp: Don't make tmpdir/gas. Put as symlink into
tmpdir/ld.
(gcc_gas_flag, gcc_ld_flag): Delete.
(gcc_B_opt, ld_L_opt): New globals.
ld-elf/shared.exp: Remove all refs to gcc_gas_flag and gcc_ld_flag.
ld-plugin/lto.exp: Likewise.
lib/ld-lib.exp (run_host_cmd): Add gcc_B_opt and ld_L_opt here.
(ld_simple_link): Remove -B handling now that this is done in
run_host_cmd. Simplify.
(default_ld_compile): Simplify.
(check_lto_available): Use run_host_cmd_yesno.
(check_lto_shared_available): Likewise.
When a shared library appears within --start-group/--end-group ld may
only discover a need for loading the library on the second or
subsequent pass over archive libraries, as more objects are extracted.
ld/
PR 17068
* ldlang.c (load_symbols): Always check flags.reload.
(open_input_bfds): Always reload --as-needed shared libraries,
not just when rescanning.
* ldlang.h (struct lang_input_statement_flags): Update reload comment.
* plugin.c (plugin_should_reload): Assume shared library arg.
* plugin.h (plugin_should_reload): Update comment.
ld/testsuite
* ld-elf/pr17068.s: New.
* ld-elf/pr17068a.s: New.
* ld-elf/pr17068b.s: New.
* ld-elf/pr17068c.s: New.
* ld-elf/pr17068d.s: New.
* ld-elf/pr17068e.s: New.
* ld-elf/pr17068ez.s: New.
* ld-elf/elf.exp: Run new test.
* ld-elf/shared.exp: Introduce the extralibs variable to control
the libraries to be linked. Don't link -ldl on *-*-freebsd*.
* ld-bootstrap/bootstrap.exp: Do not add -ldl to the extralibs on
*-*-freebsd*.
It is added for
commit 409ff343a4
Author: Alan Modra <amodra@gmail.com>
Date: Tue Nov 8 13:49:11 2011 +0000
* elflink.c (bfd_elf_gc_mark_dynamic_ref_symbol): Mark syms in
executables when export_dynamic.
* ld-elf/rdynamic-1.c: New file.
* ld-elf/rdynamic-1.rd: Likewise.
* ld-elf/shared.exp (build_tests): Add rdynamic-1.
There is nothing linker can do when a type mismatched default definition
are made dynamic by info->shared, info->export_dynamic or h->ref_dynamic.
But we do want to avoid exporting it when building PIE. Let's remove
those checks.
bfd/
PR ld/2404
* elflink.c (_bfd_elf_merge_symbol): Don't check info->shared,
info->export_dynamic, nor !h->ref_dynamic for type mismatch when
adding the default version.
ld/testsuite/
PR ld/2404
* ld-elf/shared.exp: Add a PIE test for PR ld/2404.
PR ld/2404 was fixed without a testcase. This patch to add one.
PR ld/2404
* ld-elf/pr2404.out: New file.
* ld-elf/pr2404a.c: Likewise.
* ld-elf/pr2404b.c: Likewise.
* ld-elf/shared.exp (build_tests): Build libpr2404a.so and
libpr2404b.a.
(run_tests): Run pr2404.
Rather than hacking every backend to not discard dynamic relocations
against an undefined hidden __ehdr_start, make it appear to be defined
early. We want __ehdr_start hidden before size_dynamic_sections so
that it isn't put in .dynsym, but we do need the dynamic relocations
for a PIE or shared library with a non-PIC reference. Defining it
early is wrong if we don't actually define the symbol later to its
proper value. (In some cases we want to leave the symbol undefined,
for example, when the ELF header isn't loaded, and we don't have this
infomation available in before_allocation.)
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation): Define
__ehdr_start before size_dynamic_sections and restore afterwards.
ld/testsuite/
* ld-elf/ehdr_start-shared.d: New.
* ld-elf/ehdr_start-userdef.d: xfail frv.
* ld-elf/ehdr_start-weak.d: Likewise.
* ld-elf/ehdr_start.d: Likewise.
This patch fixes 2 GNU_RELRO segment bugs:
1. lang_size_sections didn't properly align base to the maximum
alignment power of sections between DATA_SEGMENT_ALIGN and
DATA_SEGMENT_RELRO_END.
2. ld failed to adjust LOAD segment to generate GNU_RELRO segment
when LOAD segment doesn't fit GNU_RELRO segment. This is
https://sourceware.org/bugzilla/show_bug.cgi?id=14207
We "fixed" ld by not generating GNU_RELRO segment. This patch
adjusts LOAD segment to generate GNU_RELRO segment. It fixes
PR ld/16322 and at the same time it also fixes PR binutils/16323
since now we can adjust LOAD segment if it is too small.
bfd/
PR ld/14207
PR ld/16322
PR binutils/16323
* elf.c (_bfd_elf_map_sections_to_segments): Don't check section
size for PT_GNU_RELRO segment.
(assign_file_positions_for_load_sections): If PT_LOAD segment
doesn't fit PT_GNU_RELRO segment, adjust its p_filesz and p_memsz.
ld/
PR ld/14207
PR ld/16322
PR binutils/16323
* ldlang.c (lang_size_sections): Properly align RELRO base.
ld/testsuite/
PR ld/14207
PR ld/16322
PR binutils/16323
* ld-elf/pr16322.d: New file.
* ld-elf/pr16322.s: Likewise.
* ld-x86-64/pr14207.d: Expect PT_GNU_RELRO segment.
It is a good pratice to set the SHF_INFO_LINK bit when the sh_info field
represents a section header index.
bfd/
PR binutils/16317
* elf.c (assign_section_numbers): Set the SHF_INFO_LINK bit for
SHT_REL/SHT_RELA sections when setting the sh_info field.
binutils/testsuite/
PR binutils/16317
* binutils-all/readelf.s: Updated.
* binutils-all/readelf.s-64: Likewise.
ld/testsuite/
PR binutils/16317
* ld-elf/linkinfo1.s: New file.
* ld-elf/linkinfo1a.d: Likewise.
* ld-elf/linkinfo1b.d: Likewise.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation):
Don't use bfd_elf_record_link_assignment to mark __ehdr_start
hidden. Instead, just do it directly here, and only if it was
referenced but not defined.
ld/testsuite/
* ld-elf/ehdr_start-userdef.t: New file.
* ld-elf/ehdr_start-userdef.d: New file.
* ld-elf/ehdr_start-strongref.s: New file.
* ld-elf/ehdr_start-missing.t: New file.
* ld-elf/ehdr_start-missing.d: New file.
* ld-elf/ehdr_start-weak.d: New file.
* ld-mips-elf/ehdr_start-2.nd: Expect __ehdr_start to be global.
explicit patterns for test target qualification. Define extra
tool flags for *-*-hpux* and tic6x-*-* targets. Link with a
linker script. Use alternative patterns for targets that do not
eliminate copy relocs, currently mn10300-*-* and vax-*-*.
* ld-elf/comm-data2.s: Handle HPUX's `.comm' syntax.
* ld-elf/comm-data2.ld: New test linker script.
* ld-elf/comm-data2.xd: Match section's VMA too. Ignore ASCII
data dump.
* ld-elf/comm-data2r.rd: New test pattern.
* ld-elf/comm-data2r.sd: New test pattern.
* ld-elf/comm-data2r.xd: New test pattern.
* ld-mips-elf/comm-data.exp: Use check_shared_lib_support rather
than an explicit pattern for test target qualification. Link
with a linker script.
PR ld/15762
* ld-elf/shared.exp (build_tests): Check .gnu.warning section
in the libbarw.so library.
* ld-elf/libbarw.rd: New.
* lib/ld-lib.exp (run_cc_link_tests): Support checking on
output with warning message.
PR ld/15365
* layout.cc (Layout::finalize): Make __ehdr_start STV_HIDDEN.
ld/
PR ld/15365
* emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation):
Restrict __ehdr_start's export class to no less than STV_HIDDEN.
ld/testsuite/
PR ld/15365
* ld-elf/ehdr_start.d: Expect __ehdr_start to be STB_LOCAL.
* ld-mips-elf/ehdr_start-1.nd: New test.
* ld-mips-elf/ehdr_start-2.nd: New test.
* ld-mips-elf/ehdr_start-1.ld: New test linker script.
* ld-mips-elf/ehdr_start-2.ld: New test linker script.
* ld-mips-elf/ehdr_start-new.s: New test source.
* ld-mips-elf/ehdr_start-o32.s: New test source.
* ld-mips-elf/mips-elf.exp: Run the new tests.
* ld-elf/provide-hidden-abs.nd: New test.
* ld-elf/provide-hidden-def.nd: New test.
* ld-elf/provide-hidden-dyn.nd: New test.
* ld-elf/provide-hidden-sec.nd: New test.
* ld-elf/provide-hidden-dynabs.nd: New test.
* ld-elf/provide-hidden-dynsec.nd: New test.
* ld-elf/provide-hidden-s.ld: New test linker script.
* ld-elf/provide-hidden-1.ld: New test linker script.
* ld-elf/provide-hidden-2.ld: New test linker script.
* ld-elf/provide-hidden-1.s: New test source.
* ld-elf/provide-hidden-2.s: New test source.
* ld-elf/provide-hidden-3.s: New test source.
* ld-elf/provide-hidden-4.s: New test source.
* ld-elf/provide-hidden.exp: New test script.
* config.bfd (msp430): Define targ_selvecs.
* configure.in: Add bfd_elf32_msp430_ti_vec.
* cpu-msp430.c: Add some more MSP430 machine numbers.
* elf32-msp430.c Add support for MSP430X relocations.
Add support for TI compiler generated relocations.
Add support for sym_diff relocations.
Add support for relaxing out of range short branches into long
branches.
Add support for MSP430 attribute section.
* reloc.c: Add MSP430X relocations.
* targets.c: Add bfd_elf32_msp430_ti_vec.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* readelf.c: Add support for MSP430X architecture.
* readelf.exp: Expect -wi test to fail for the MSP430.
* config/tc-msp430.c: Add support for the MSP430X architecture.
Add code to insert a NOP instruction after any instruction that
might change the interrupt state.
Add support for the LARGE memory model.
Add code to initialise the .MSP430.attributes section.
* config/tc-msp430.h: Add support for the MSP430X architecture.
* doc/c-msp430.texi: Document the new -mL and -mN command line
options.
* NEWS: Mention support for the MSP430X architecture.
* gas/all/gas.exp: Skip the DIFF1 test for the MSP430.
Expect the FORWARD test to pass for the MSP430.
Skip the REDEF tests for the MSP430.
Expect the 930509A test to fail for the MSP430.
* gas/all/sleb128-4.d: Skip for the MSP430.
* gas/elf/elf.exp: Set target_machine to msp430 for the MSP430.
Skip the EHOPT0 test for the MSP430.
Skip the REDEF and EQU-RELOC tests for the MSP430.
* gas/elf/section2.e-msp430: New file.
* gas/lns/lns-big-delta.d: Remove expectation of 20-bit
addresses.
* gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430.
* gas/msp430/msp430x.s: New test.
* gas/msp430/msp430x.d: Expected disassembly.
* gas/msp430/msp430.exp: Run new test.
* gas/msp430/opcode.d: Update expected disassembly.
* msp430.h: Add MSP430X relocs.
Add some more MSP430 machine numbers.
Add values used by .MSP430.attributes section.
* msp430.h: Add patterns for MSP430X instructions.
* Makefile.am: Add emsp430X.c
* Makefine.in: Regenerate.
* configure.tgt (msp430): Add msp430X emulation.
* ldmain.c (multiple_definition): Only disable relaxation if it
was enabled by the user.
* ldmain.h (RELAXATION_ENABLED_BY_USER): New macro.
* emulparams/msp430all.sh: Add support for MSP430X.
* emultempl/generic.em: (before_parse): Enable relaxation for the
MSP430.
* scripttempl/msp430.sc: Reorganize sections. Add .rodata
section.
* scripttempl/msp430_3.sc: Likewise.
* NEWS: Mention support for MSP430X.
* ld-elf/flags1.d: Expect this test to pass on the MSP430.
* ld-elf/init-fini-arrays.d: Expect this test to fail on the
MSP430.
* ld-elf/merge.d: Expect this test to pass on the MSP430.
* ld-elf/sec64k.exp: Skip these tests for the MSP430.
* ld-gc/pr13683.d: Expect this test to fail on the MSP430.
* ld-srec/srec.exp: Expect these tests to fail on the MSP430.
* ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to
fail on the MSP430.
* msp430-dis.c: Add support for MSP430X instructions.
* elflink.c (_bfd_elf_make_dynamic_reloc_section): Override
sh_type according to is_rela.
ld/testsuite/
* ld-elf/rel.c, ld-elf/relmain.c, ld-elf/relmain.out: New test.
* ld-elf/shared.exp: Build and run it.
* metag.h: New file.
* dis-asm.h (print_insn_metag): New declaration.
* metag.h: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.in: Add Meta.
* disassemble.c: Add Meta support.
* metag-dis.c: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* archures.c (bfd_mach_metag): New.
* bfd-in2.h: Regenerate.
* config.bfd: Add Meta.
* configure: Regenerate.
* configure.in: Add Meta.
* cpu-metag.c: New file.
* elf-bfd.h: Add Meta.
* elf32-metag.c: New file.
* elf32-metag.h: New file.
* libbfd.h: Regenerate.
* reloc.c: Add Meta relocations.
* targets.c: Add Meta.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* config/tc-metag.c: New file.
* config/tc-metag.h: New file.
* configure.tgt: Add Meta.
* doc/Makefile.am: Add Meta.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add Meta.
* doc/as.texiinfo: Document Meta options.
* doc/c-metag.texi: New file.
* gas/metag/labelarithmetic.d: New file.
* gas/metag/labelarithmetic.s: New file.
* gas/metag/metacore12.d: New file.
* gas/metag/metacore12.s: New file.
* gas/metag/metacore21-invalid.l: New file.
* gas/metag/metacore21-invalid.s: New file.
* gas/metag/metacore21.d: New file.
* gas/metag/metacore21.s: New file.
* gas/metag/metacore21ext.d: New file.
* gas/metag/metacore21ext.s: New file.
* gas/metag/metadsp21-invalid.l: New file.
* gas/metag/metadsp21-invalid.s: New file.
* gas/metag/metadsp21.d: New file.
* gas/metag/metadsp21.s: New file.
* gas/metag/metadsp21ext.d: New file.
* gas/metag/metadsp21ext.s: New file.
* gas/metag/metafpu21.d: New file.
* gas/metag/metafpu21.s: New file.
* gas/metag/metafpu21ext.d: New file.
* gas/metag/metafpu21ext.s: New file.
* gas/metag/metag.exp: New file.
* gas/metag/tls.d: New file.
* gas/metag/tls.s: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* configure.tgt: Add Meta.
* emulparams/elf32metag.sh: New file.
* emultempl/metagelf.em: New file.
* ld-elf/merge.d: Mark Meta as xfail.
* ld-gc/start.d: Skip this test on Meta.
* ld-gc/personality.d: Skip this test on Meta.
* ld-metag/external.s: New file.
* ld-metag/metag.exp: New file.
* ld-metag/pcrel.d: New file.
* ld-metag/pcrel.s: New file.
* ld-metag/shared.d: New file.
* ld-metag/shared.r: New file.
* ld-metag/shared.s: New file.
* ld-metag/stub.d: New file.
* ld-metag/stub.s: New file.
* ld-metag/stub_pic_app.d: New file.
* ld-metag/stub_pic_app.r: New file.
* ld-metag/stub_pic_app.s: New file.
* ld-metag/stub_pic_shared.d: New file.
* ld-metag/stub_pic_shared.s: New file.
* ld-metag/stub_shared.d: New file.
* ld-metag/stub_shared.r: New file.
* ld-metag/stub_shared.s: New file.
* binutils/readelf.c: (guess_is_rela): Add EM_METAG.
(dump_relocations): Add EM_METAG.
(get_machine_name): Correct case for Meta.
(is_32bit_abs_reloc): Add support for Meta ADDR32 reloc.
(is_none_reloc): Add support for Meta NONE reloc.
* ld-elf/elf.exp (stack exec, stack size): Run for any GNU target.
* ld-elf/maxpage3c.d: Run for any x86 GNU target.
* ld-elf/maxpage4.d: Likewise.
* ld-elf/maxpage5.d: Likewise.
* ld-i386/export-class.exp: Likewise.
2012-12-13 Yufeng Zhang <yufeng.zhang@arm.com>
* ld-elf/indirect.exp: Disable if -shared is not supported.
* lib/ld-lib.exp (check_shared_lib_support): Add aarch64*-*-elf and
arm*-*-elf to the exclude list.
ld/
PR ld/14915
* emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Also
check DT_NEEDED entries when creating shared object with
--copy-dt-needed-entries.
ld/testsuite/
PR ld/14915
* ld-elf/shared.exp (build_tests): Test --add-needed,
--copy-dt-needed-entries, --no-add-needed and
--no-copy-dt-needed-entries with -shared.
Add tests for --no-add-needed and --no-copy-dt-needed-entries
with -shared.
* lib/binutils-common.exp (is_zlib_supported): New function.
* lib/utils-lib.exp (run_dump_test): If as options include
--compress-debug-sections and zlib is not available, report
the test as unsupported.
* binutils-all/compress.exp: Bail out if zlib is not available.
* binutils-all/objdump.exp (objdump compressed debug):
Mark unsupported if zlib is not available.
* binutils-all/readelf.exp (readelf_compressed_wa_test): Likewise.
gas/testsuite/
* lib/gas-defs.exp (run_dump_test): If as options include
--compress-debug-sections and zlib is not available, report
the test as unsupported.
ld/testsuite/
* ld-elf/compress.exp: Bail out if zlib is not supported.
* lib/ld-lib.exp (run_dump_test): If as options include
--compress-debug-sections and zlib is not available, report
the test as unsupported.
bfd/
PR binutils/14493
* elf.c (copy_elf_program_header): When rewriting program
header, set the output maxpagesize to the maximum alignment
of input PT_LOAD segments.
2012-11-21 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/14493
* ld-elf/maxpage5.d: New file.
* ld-elf/maxpage5.s: Likewise.
* ld-elf/maxpage5.t: Likewise.
bfd/
PR ld/14591
* elf-bfd.h (_bfd_elf_merge_symbol): Add an argument to return
if the old symbol is weak.
* elf32-sh-symbian.c (sh_symbian_relocate_section): Update
_bfd_elf_merge_symbol call.
* elflink.c (_bfd_elf_merge_symbol): Add an argument to return
if the old symbol is weak.
(_bfd_elf_add_default_symbol): Update _bfd_elf_merge_symbol
call.
(elf_link_add_object_symbols): Don't update symbol type from a
weak definition. Update symbol type from a common symbol when
overriding a weak symbol.
ld/testsuite/
PR ld/14591
* ld-elf/comm-data.exp (run_ld_link_tests): Add comm-data3a and
comm-data3b tests.
* ld-ifunc/ifunc.exp (run_ld_link_exec_tests): New.
* ld-elf/comm-data3.sd: New file.
* ld-elf/comm-data3a.s: Likewise.
* ld-elf/comm-data3b.s: Likewise.
* ld-ifunc/ifunc-17a-i386.d: Likewise.
* ld-ifunc/ifunc-17a-x86-64.d: Likewise.
* ld-ifunc/ifunc-17a.s: Likewise.
* ld-ifunc/ifunc-17b-i386.d: Likewise.
* ld-ifunc/ifunc-17b-x86-64.d: Likewise.
* ld-ifunc/ifunc-17b.s: Likewise.
* ld-ifunc/ifunc-common-1.out: Likewise.
* ld-ifunc/ifunc-common-1a.c: Likewise.
* ld-ifunc/ifunc-common-1b.c: Likewise.
* ld-elf/shared.exp (build_cxx_tests): Move out the commented out
test.
* lib/ld-lib.exp (run_ld_link_exec_tests): Assemble all sources
files in each test.
* ld-elf/export-class.vd: New test.
* ld-elf/export-class-def.s: New test source.
* ld-elf/export-class-dep.s: New test source.
* ld-elf/export-class-lib.s: New test source.
* ld-elf/export-class-ref.s: New test source.
* ld-elf/export-class-lib.ver: New test version script.
* ld-elf/export-class.exp: New test script.
* ld-arm/arm-export-class.rd: New test.
* ld-arm/arm-export-class.xd: New test.
* ld-arm/export-class.exp: New test script.
* ld-i386/i386-export-class.rd: New test.
* ld-i386/i386-export-class.xd: New test.
* ld-i386/export-class.exp: New test script.
* ld-mips-elf/mips-32-export-class.rd: New test.
* ld-mips-elf/mips-32-export-class.xd: New test.
* ld-mips-elf/mips-64-export-class.rd: New test.
* ld-mips-elf/mips-64-export-class.xd: New test.
* ld-mips-elf/export-class.exp: New test script.
* ld-powerpc/powerpc-32-export-class.rd: New test.
* ld-powerpc/powerpc-32-export-class.xd: New test.
* ld-powerpc/powerpc-64-export-class.rd: New test.
* ld-powerpc/powerpc-64-export-class.xd: New test.
* ld-powerpc/export-class.exp: New test script.
* ld-x86-64/x86-64-64-export-class.rd: New test.
* ld-x86-64/x86-64-x32-export-class.rd: New test.
* ld-x86-64/export-class.exp: New test script.
* ld-elf/exclude3a.d: Remove target and use failif.
* ld-elf/exclude3b.d: Change target to *-*-linux* *-*-gnu* and
use failif
* ld-elf/exclude3d.d: Removed.
2012-07-03 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3351
* elflink.c (_bfd_elf_update_dynamic_flags): New.
(_bfd_elf_merge_symbol): Update both real and indirect symbol
dynamic flags.
(_bfd_elf_add_default_symbol): Make the real symbol dynamic if
the indirect symbol is defined in a shared library.
(elf_link_add_object_symbols): Likewise. If the indirect
symbol has been forced local, don't make the real symbol
dynamic.
(elf_link_check_versioned_symbol): Check indirect symbol.
(elf_link_output_extsym): Use real symbol definition when
reporting indirect symbol error. Check version info for
dynamic versioned symbol.
2012-07-03 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3351
* ld-elf/indirect.exp: New file.
* ld-elf/indirect1a.c: Likewise.
* ld-elf/indirect1b.c: Likewise.
* ld-elf/indirect1c.c: Likewise.
* ld-elf/indirect2.c: Likewise.
* ld-elf/indirect3.out: Likewise.
* ld-elf/indirect3a.c: Likewise.
* ld-elf/indirect3b.c: Likewise.
* ld-elf/indirect3c.c: Likewise.
* ld-elf/indirect4.out: Likewise.
* ld-elf/indirect4a.c: Likewise.
* ld-elf/indirect4b.c: Likewise.
* ld-elf/indirect4c.c: Likewise.
* elf.c (assign_file_positions_for_non_load_sections): Define
__ehdr_start symbol if it's referenced and there's a PT_LOAD
segment that covers both the file and program headers.
ld/
* NEWS: Mention __ehdr_start.
ld/testsuite/
* ld-elf/ehdr_start.s: New file.
* ld-elf/ehdr_start.d: New file.
* ld-elf/eh1.d: Add explicit --64 to as options, and explicit
-melf_x86_64 and -Ttext to ld options, so we don't assume every
x86_64-*-* target uses --64 (vs --x32) by default or has the
same address space layout.
* ld-elf/eh2.d: Likewise.
* ld-elf/eh3.d: Likewise.
* ld-elf/eh4.d: Likewise.
* ld-elf/elf.exp: For target *-*-nacl*, use options_regsub(ld) to
map -melf_x86_64 to -melf_x86_64_nacl.
* ld-elf/pr11304a.s: Always have whitespace before directives.
* ld-elf/pr11304b.s: Likewise.
* ld-selective/selective.exp: Test m68hc1* variant of m6811, m6812.
* lib/ld-lib.exp: Likewise, and vice versa.
bfd/
* linker.c (fix_syms): Force symbols outside any section into
bfd_abs_section_ptr.
ld/testsuite/
* ld-elf/warn2.d: Expect ABS section for Foo.
* ld-elf/zerosize1.d, zerosize1.s: New test.
* lib/ld-lib.exp (run_ld_link_tests): Handle sources from other
directories.
(run_ld_link_exec_tests): Likewise.
(run_cc_link_tests): Likewise.
* ld-elf/comm-data1.sd: New test.
* ld-elf/comm-data1.s: Source for the new test.
* ld-elf/comm-data2.sd: New test.
* ld-elf/comm-data2.rd: Likewise.
* ld-elf/comm-data2.xd: Likewise.
* ld-elf/comm-data2.s: Source for the new tests.
* ld-elf/comm-data.exp: New file.
* ld-mips-elf/comm-data.exp: Likewise.
bfd/
2011-09-28 H.J. Lu <hongjiu.lu@intel.com>
PR ld/13195
* elflink.c (_bfd_elf_merge_symbol): Don't set dynamic_def when
clearing def_dynamic.
(elf_link_add_object_symbols): Likewise. Set dynamic_def when
setting def_dynamic.
(bfd_elf_gc_mark_dynamic_ref_symbol): Check if a symbol is
versioned.
ld/testsuite/
2011-09-28 H.J. Lu <hongjiu.lu@intel.com>
PR ld/13195
* ld-elf/elf.exp: Add a C link testcase for PR ld/13195.
* ld-elf/pr13195.c: New.
* ld-elf/pr13195.d: Likewise.
* ld-elf/pr13195.s: Likewise.
* ld-elf/pr13195.t: Likewise.
2011-09-16 H.J. Lu <hongjiu.lu@intel.com>
* ld-elf/pr12975.d: Only run for *-*-linux* and *-*-gnu*
targets.
* ld-elf/pr13177.d: Likewise.
* ld-elf/pr13177.s: Avoid relocations in text sections.
backend does not provide a function for creating dynamic sections
then fail.
(bfd_elf_final_link): Issue a warning message if a dynamic section
has the SHT_NOTE type.
(bfd_elf_final_link): Do not look for dynamic strings in a section
that does not have the SHT_STRTAB type or the name .dynstr.
* elf32-arm.c (elf32_arm_finish_dynamic_sections): Fail if the got
section is not in the output binary.
* elf32-hppa.c (elf32_hppa_finish_dynamic_sections): Likewise.
* ld-elf/elf.exp: Add test for linking a shared library with a
broken linker script that marks dynamic sections as being notes.
* ld-elf/note-3.s: New test source file.
* ld-elf/note-3.t: New test linker script.
* ld-elf/note-3.l: Expected output from the linker.
* lib/ld-lib.exp (run_ld_link_tests): Improve description.
* elflink.c (elf_link_add_object_symbols): Process .gnu.warning
sections when building shared libraries.
* lib/ld-lib.exp (run_cc_link_tests): Add an optional 8th
parameter - an expected warning message from the linker.
* ld-elf/shared.exp (build_tests): Expect a warning message when
building the libbarw.so library.
* ld-elf/shared.exp: Run library building tests even when not
building a native toolchain.
default_ld_assemble.
(ld_assemble_flags): New function.
* ld-elf/frame.exp: Pass -mpic and -mpid flags to the assembler on
tic6x.
* ld-elf/exclude.exp: Likewise.
* lib/ld-lib.exp (default_ld_assemble): Take extra argument in_flags
and pass it to the assembler.
* tic6x.h (R_C6000_JUMP_SPLOT, R_C6000_EHTYPE,
R_C6000_PCR_H16, R_C6000_PCR_L16): New relocs.
(SHN_TIC6X_SCOMMON): Define.
bfd/
* elf32-tic6x.h (struct elf32_tic6x_params): New.
(elf32_tic6x_setup): Declare.
* elf32-tic6x.c: Include <limits.h>.
(ELF_DYNAMIC_LINKER, DEFAULT_STACK_SIZE, PLT_ENTRY_SIZE): Define.
(struct elf32_tic6x_link_hash_table, struct elf32_link_hash_entry):
New structures.
(elf32_tic6x_link_hash_table, is_tic6x_elf): New macros.
(tic6x_elf_scom_section, tic6x_elf_scom_symbol,
tic6x_elf_scom_symbol_ptr): New static variables.
(elf32_tic6x_howto_table, elf32_tic6x_howto_table_rel,
elf32_tic6x_reloc_map): Add R_C6000_JUMP_SLOT, R_C6000_EHTYPE,
R_C6000_PCR_H16 and R_C6000_PCR_L16.
(elf32_tic6x_link_hash_newfunc, elf32_tic6x_link_hash_table_create,
elf32_tic6x_link_hash_table_free, elf32_tic6x_setup,
elf32_tic6x_using_dsbt, elf32_tic6x_install_rela,
elf32_tic6x_create_dynamic_sections, elf32_tic6x_make_got_dynreloc,
elf32_tic6x_finish_dynamic_symbol, elf32_tic6x_gc_sweep_hook,
elf32_tic6x_adjust_dynamic_symbol): New static functions.
(elf32_tic6x_relocate_section): For R_C6000_PCR_S21, convert branches
to weak symbols as required by the ABI.
Handle GOT and DSBT_INDEX relocs, and copy relocs to the output file
as needed when generating DSBT output.
(elf32_tic6x_check_relocs, elf32_tic6x_add_symbol_hook,
elf32_tic6x_symbol_processing, elf32_tic6x_section_from_bfd_section,
elf32_tic6x_allocate_dynrelocs, elf32_tic6x_size_dynamic_sections,
elf32_tic6x_always_size_sections, elf32_tic6x_modify_program_headers,
elf32_tic6x_finish_dynamic_sections, elf32_tic6x_plt_sym_val,
elf32_tic6x_copy_private_data, elf32_tic6x_link_omit_section_dynsym):
New static functions.
(ELF_MAXPAGESIZE): Define to 0x1000.
(bfd_elf32_bfd_copy_private_bfd_data,
bfd_elf32_bfd_link_hash_table_create,
bfd_elf32_bfd_link_hash_table_free, elf_backend_can_refcount,
elf_backend_want_got_plt, elf_backend_want_dynbss,
elf_backend_plt_readonly, elf_backend_got_header_size,
elf_backend_gc_sweep_hook, elf_backend_modify_program_headers,
elf_backend_create_dynamic_sections, elf_backend_adjust_dynamic_symbol,
elf_backend_check_relocs, elf_backend_add_symbol_hook,
elf_backend_symbol_processing, elf_backend_link_output_symbol_hook,
elf_backend_section_from_bfd_section,
elf_backend_finish_dynamic_symbol, elf_backend_always_size_sections,
elf32_tic6x_size_dynamic_sections, elf_backend_finish_dynamic_sections,
elf_backend_omit_section_dynsym, elf_backend_plt_sym_val): Define.
* bfd/reloc.c (BFD_RELOC_C6000_JUMP_SLOT, BFD_RELOC_C6000_EHTYPE,
BFD_RELOC_C6000_PCR_H16, BFD_RELOC_C6000_PCR_S16): Add.
* bfd/bfd-in2.h: Regenerate.
* bfd/libbfd.h: Regenerate.
* config.bfd: Accept tic6x-*-* instead of tic6x-*-elf.
gas/
* config/tc-tic6x.c (sbss_section, scom_section, scom_symbol): New
static variables.
(md_begin): Initialize them.
(s_tic6x_scomm): New static function.
(md_pseudo_table): Add "scomm".
(tc_gen_reloc): Really undo all adjustments made by
bfd_install_relocation.
* doc/c-tic6x.texi: Document the .scomm directive.
gas/testsuite/
* gas/tic6x/scomm-directive-1.s: New test.
* gas/tic6x/scomm-directive-1.d: New test.
* gas/tic6x/scomm-directive-2.s: New test.
* gas/tic6x/scomm-directive-2.d: New test.
* gas/tic6x/scomm-directive-3.s: New test.
* gas/tic6x/scomm-directive-3.d: New test.
* gas/tic6x/scomm-directive-4.s: New test.
* gas/tic6x/scomm-directive-4.d: New test.
* gas/tic6x/scomm-directive-5.s: New test.
* gas/tic6x/scomm-directive-5.d: New test.
* gas/tic6x/scomm-directive-6.s: New test.
* gas/tic6x/scomm-directive-6.d: New test.
* gas/tic6x/scomm-directive-7.s: New test.
* gas/tic6x/scomm-directive-7.d: New test.
* gas/tic6x/scomm-directive-8.s: New test.
* gas/tic6x/scomm-directive-8.d: New test.
ld/
* emulparams/elf32_tic6x_le.sh (BIG_OUTPUT_FORMAT, EXTRA_EM_FILE,
GENERATE_SHLIB_SCRIPT): New defines.
(TEXT_START_ADDR): Define differently depending on target.
(.got): Redefine to include "*(.dsbt)".
(SDATA_START_SYMBOLS): Remove, replace with
(OTHER_GOT_SYMBOLS): New.
(OTHER_BSS_SECTIONS): Define only for ELF targets.
* emultempl/tic6xdsbt.em: New file.
* gen-doc.texi: Set C6X.
* ld.texinfo: Likewise.
(Options specific to C6X uClinux targets): New section.
binutils/
* readelf.c (get_symbol_index_type): Handle SCOM for TIC6X.
(dump_relocations): Likewise.
binutils/testsuite/
* lib/binutils-common.exp (is_elf_format): Accept tic6x*-*-uclinux*.
ld/testsuite/
* ld-scripts/crossref.exp: Add CFLAGS for tic6x*-*-*.
* ld-elf/sec-to-seg.exp: Remove tic6x from list of targets defining
pagesize to 1.
* ld-tic6x/tic6x.exp: Add support for DSBT shared library/executable
linking tests.
* ld-tic6x/dsbt.ld: New linker script.
* ld-tic6x/dsbt-be.ld: New linker script.
* ld-tic6x/dsbt-overflow.ld: New linker script.
* ld-tic6x/dsbt-inrange.ld: New linker script.
* ld-tic6x/shlib-1.s: New test.
* ld-tic6x/shlib-2.s: New test.
* ld-tic6x/shlib-app-1r.s: New test.
* ld-tic6x/shlib-app-1.s: New test.
* ld-tic6x/shlib-1.sd: New test.
* ld-tic6x/shlib-1.dd: New test.
* ld-tic6x/shlib-app-1.rd: New test.
* ld-tic6x/shlib-app-1rb.rd: New test.
* ld-tic6x/shlib-app-1.sd: New test.
* ld-tic6x/static-app-1rb.od: New test.
* ld-tic6x/shlib-app-1.dd: New test.
* ld-tic6x/shlib-app-1rb.sd: New test.
* ld-tic6x/static-app-1b.od: New test.
* ld-tic6x/static-app-1r.od: New test.
* ld-tic6x/shlib-1rb.rd: New test.
* ld-tic6x/shlib-app-1rb.dd: New test.
* ld-tic6x/shlib-1rb.sd: New test.
* ld-tic6x/shlib-1rb.dd: New test.
* ld-tic6x/shlib-app-1b.od: New test.
* ld-tic6x/tic6x.exp: New test.
* ld-tic6x/static-app-1rb.rd: New test.
* ld-tic6x/shlib-app-1r.od: New test.
* ld-tic6x/static-app-1.od: New test.
* ld-tic6x/static-app-1b.rd: New test.
* ld-tic6x/static-app-1r.rd: New test.
* ld-tic6x/static-app-1rb.sd: New test.
* ld-tic6x/static-app-1b.sd: New test.
* ld-tic6x/static-app-1rb.dd: New test.
* ld-tic6x/static-app-1r.sd: New test.
* ld-tic6x/static-app-1b.dd: New test.
* ld-tic6x/shlib-1b.rd: New test.
* ld-tic6x/static-app-1r.dd: New test.
* ld-tic6x/shlib-app-1b.rd: New test.
* ld-tic6x/shlib-1r.rd: New test.
* ld-tic6x/shlib-app-1r.rd: New test.
* ld-tic6x/shlib-1b.sd: New test.
* ld-tic6x/static-app-1.rd: New test.
* ld-tic6x/shlib-app-1b.sd: New test.
* ld-tic6x/shlib-1r.sd: New test.
* ld-tic6x/shlib-1b.dd: New test.
* ld-tic6x/shlib-app-1r.sd: New test.
* ld-tic6x/shlib-app-1b.dd: New test.
* ld-tic6x/shlib-1r.dd: New test.
* ld-tic6x/static-app-1.sd: New test.
* ld-tic6x/shlib-app-1r.dd: New test.
* ld-tic6x/static-app-1.dd: New test.
* ld-tic6x/shlib-noindex.rd: New test.
* ld-tic6x/shlib-noindex.dd: New test.
* ld-tic6x/shlib-noindex.sd: New test.
* ld-tic6x/got-reloc-local-1.s: New test.
* ld-tic6x/got-reloc-local-2.s: New test.
* ld-tic6x/got-reloc-local-r.d: New test.
* ld-tic6x/got-reloc-global.s: New test.
* ld-tic6x/got-reloc-global-addend-1.d: New test.
* ld-tic6x/got-reloc-global-addend-1.s: New test.
* ld-tic6x/got-reloc-global-addend-2.d: New test.
* ld-tic6x/got-reloc-inrange.d: New test.
* ld-tic6x/got-reloc-overflow.d: New test.
* ld-tic6x/got-reloc-global-addend-2.s: New test.
* ld-tic6x/dsbt-index-error.d: New test.
* ld-tic6x/dsbt-index.d: New test.
* ld-tic6x/dsbt-index.s: New test.
* ld-tic6x/shlib-app-1.od: New test.
* ld-tic6x/shlib-app-1rb.od: New test.
* ld-tic6x/shlib-1.rd: New test.
* ld-tic6x/weak.d: New test.
* ld-tic6x/weak-be.d: New test.
* ld-tic6x/weak.s: New test.
* ld-tic6x/weak-data.d: New test.
* ld-tic6x/common.d: New test.
* ld-tic6x/common.ld: New test.
* ld-tic6x/common.s: New test.
The symbol versioning tests mix C-visible symbols and linker-visible
symbols in order to verify .symver behavior. This works for most
people, but fail for targets that have a symbol prefix. So add a
helper file with macros that expand gcc's __USER_LABEL_PREFIX__ as
necessary and convert all .symver users over to it.
Now that the tests are usable on prefixed targets, update the tests
to take into account an optional leading underscore.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* config/obj-elf.c (elf_adjust_symtab): New. Move group section
processing here from elf_frob_file. Ensure that group signature
symbols have the name of the group.
(elf_frob_file): Move group section processing to
elf_adjust_symtab.
* config/obj-elf.h (elf_adjust_symtab): Declare.
(obj_adjust_symtab): Define.
* config/tc-arm.c (arm_adjust_symtab): Call elf_adjust_symtab.
2010-10-23 Mark Mitchell <mark@codesourcery.com>
* gas/elf/elf.exp: Add group0c test.
* gas/elf/group0c.d: New.
* gas/elf/group0a.d: Expect ".group" for the name of group
sections.
* gas/elf/group0b.d: Likewise.
* gas/elf/group1a.d: Likewise.
* gas/elf/group1b.d: Likewise.
* gas/elf/groupautoa.d: Likewise.
* gas/elf/groupautob.d: Likewise.
* gas/elf/section4.d: Likewise.
* gas/ia64/group-1.d: Likewise. Adjust hard-coded constants.
2010-10-22 Mark Mitchell <mark@codesourcery.com>
* binutils-all/group-5.d: Expect ".group" for the name of group
sections.
* binutils-all/strip-2.d: Likewise.
2010-10-23 Mark Mitchell <mark@codesourcery.com>
* ld-elf/group10.d: Expect ".group" for the name of group
sections.
* ld-elf/group2.d: Likewise.
* ld-elf/group7.d: Likewise.
* ld-elf/group2.d: xfail xstormy.
* ld-elf/group4.d: Likewise.
* ld-elf/group5.d: Likewise.
* ld-elf/group6.d: Likewise.
* ld-elf/init-fini-arrays.d: xfail cr16 and crx.
* ld-elf/orphan2.d: xfail xstormy.
* ld-elf/sec64k.exp: Don't run on targets using generic linker.
Allow a larger range for ld -r expected bar_1 section. Don't run
final link test on a number of targets. Select avr6 for avr targets.
* ld-elfcomm/elfcomm.exp: Don't attempt on hpux.
* elf.c (assign_file_positions_for_load_sections): Revert 2008-05-29
change. Tidy. Don't error on sections not allocated in segment.
ld/testsuite/
* ld-elf/extract-symbol-1sec.d: Update lma.
* ld-i386/alloc.d: Expect a warning, not an error.
match an existing output section, but an unused output section
statement does match, use it.
* emultempl/pe.em (_place_orphan): Likewise.
* emultempl/pep.em (_place_orphan): Likewise.
* ld-elf/orphan4.d: New.
* ld-elf/orphan4.ld: New.
* ld-elf/orphan4.s: New.
bfd/
2010-01-07 H.J. Lu <hongjiu.lu@intel.com>
PR ld/11138
* elflink.c (elf_link_check_versioned_symbol): Don't abort if
a symbol referenced by DSO is is defined in a non-shared object
and forced local.
ld/testsuite/
2010-01-07 H.J. Lu <hongjiu.lu@intel.com>
PR ld/11138
* ld-elf/pr11138-1.c: New.
* ld-elf/pr11138-1.map: Likewise.
* ld-elf/pr11138-2.c: Likewise.
* ld-elf/pr11138-2.map: Likewise.
* ld-elf/pr11138.out: Likewise.
* ld-elf/shared.exp (build_tests): Add libpr11138-1.so and
libpr11138-2.o.
(run_tests): Add 2 tests for PR ld/11138.
