We would like to wrap examples, output or code snippet in comments with
blank lines, and move */ to a new line if the comment is ended with the
example.
gdb:
2014-08-20 Yao Qi <yao@codesourcery.com>
* amd64-tdep.c (amd64_classify): Add a blank line after the
example. Move "*/" to a new line.
* arm-tdep.c (arm_vfp_cprc_sub_candidate): Likewise.
* arm-wince-tdep.c (arm_pe_skip_trampoline_code): Likewise.
* dwarf2read.c (psymtab_include_file_name): Likewise.
This fixes PR symtab/14604, PR symtab/14605, and Jan's test at
https://sourceware.org/ml/gdb-patches/2014-07/msg00158.html, in a tree
with bddbbed reverted:
2014-07-22 Pedro Alves <palves@redhat.com>
* value.c (allocate_optimized_out_value): Don't mark value as
non-lazy.
The PRs are about variables described by the DWARF as being split over
multiple registers using DWARF piece information, but some of those
registers being marked as optimised out (not saved) by a later frame.
GDB currently incorrectly mishandles these partially-optimized-out
values.
Even though we can usually tell from the debug info whether a local or
global is optimized out, handling the case of a local living in a
register that was not saved in a frame requires fetching the variable.
GDB also needs to fetch a value to tell whether parts of it are
"<unavailable>". Given this, it's not worth it to try to avoid
fetching lazy optimized-out values based on debug info alone.
So this patch makes GDB track which chunks of a value's contents are
optimized out like it tracks <unavailable> contents. That is, it
makes value->optimized_out be a bit range vector instead of a boolean,
and removes the struct lval_funcs check_validity and check_any_valid
hooks.
Unlike Andrew's series which this is based on (at
https://sourceware.org/ml/gdb-patches/2013-08/msg00300.html, note some
pieces have gone in since), this doesn't merge optimized out and
unavailable contents validity/availability behind a single interface,
nor does it merge the bit range vectors themselves (at least yet).
While it may be desirable to have a single entry point that returns
existence of contents irrespective of what may make them
invalid/unavailable, several places want to treat optimized out /
unavailable / etc. differently, so each spot that potentially could
use it will need to be careful considered on case-by-case basis, and
best done as a separate change.
This fixes Jan's test, because value_available_contents_eq wasn't
considering optimized out value contents. It does now, and because of
that it's been renamed to value_contents_eq.
A new intro comment is added to value.h describing "<optimized out>",
"<not saved>" and "<unavailable>" values.
gdb/
PR symtab/14604
PR symtab/14605
* ada-lang.c (coerce_unspec_val_to_type): Use
value_contents_copy_raw.
* ada-valprint.c (val_print_packed_array_elements): Adjust.
* c-valprint.c (c_val_print): Use value_bits_any_optimized_out.
* cp-valprint.c (cp_print_value_fields): Let the common printing
code handle optimized out values.
(cp_print_value_fields_rtti): Use value_bits_any_optimized_out.
* d-valprint.c (dynamic_array_type): Use
value_bits_any_optimized_out.
* dwarf2loc.c (entry_data_value_funcs): Remove check_validity and
check_any_valid fields.
(check_pieced_value_bits): Delete and inline ...
(check_pieced_synthetic_pointer): ... here.
(check_pieced_value_validity): Delete.
(check_pieced_value_invalid): Delete.
(pieced_value_funcs): Remove check_validity and check_any_valid
fields.
(read_pieced_value): Use mark_value_bits_optimized_out.
(write_pieced_value): Switch to use
mark_value_bytes_optimized_out.
(dwarf2_evaluate_loc_desc_full): Copy the value contents instead
of assuming the whole value is optimized out.
* findvar.c (read_frame_register_value): Remove special handling
of optimized out registers.
(value_from_register): Use mark_value_bytes_optimized_out.
* frame-unwind.c (frame_unwind_got_optimized): Use
mark_value_bytes_optimized_out.
* jv-valprint.c (java_value_print): Adjust.
(java_print_value_fields): Let the common printing code handle
optimized out values.
* mips-tdep.c (mips_print_register): Remove special handling of
optimized out registers.
* opencl-lang.c (lval_func_check_validity): Delete.
(lval_func_check_any_valid): Delete.
(opencl_value_funcs): Remove check_validity and check_any_valid
fields.
* p-valprint.c (pascal_object_print_value_fields): Let the common
printing code handle optimized out values.
* stack.c (read_frame_arg): Remove special handling of optimized
out values. Fetch both VAL and ENTRYVAL before comparing
contents. Adjust to value_available_contents_eq rename.
* valprint.c (valprint_check_validity)
(val_print_scalar_formatted): Use value_bits_any_optimized_out.
(val_print_array_elements): Adjust.
* value.c (struct value) <optimized_out>: Now a VEC(range_s).
(value_bits_any_optimized_out): New function.
(value_entirely_covered_by_range_vector): New function, factored
out from value_entirely_unavailable.
(value_entirely_unavailable): Reimplement.
(value_entirely_optimized_out): New function.
(insert_into_bit_range_vector): New function, factored out from
mark_value_bits_unavailable.
(mark_value_bits_unavailable): Reimplement.
(struct ranges_and_idx): New struct.
(find_first_range_overlap_and_match): New function, factored out
from value_available_contents_bits_eq.
(value_available_contents_bits_eq): Rename to ...
(value_contents_bits_eq): ... this. Check both unavailable
contents and optimized out contents.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this.
(allocate_value_lazy): Remove reference to the old optimized_out
boolean.
(allocate_optimized_out_value): Use
mark_value_bytes_optimized_out.
(require_not_optimized_out): Adjust to check whether the
optimized_out vec is empty.
(ranges_copy_adjusted): New function, factored out from
value_contents_copy_raw.
(value_contents_copy_raw): Also copy the optimized out ranges.
Assert the destination ranges aren't optimized out.
(value_contents_copy): Update comment, remove call to
require_not_optimized_out.
(value_contents_equal): Adjust to check whether the optimized_out
vec is empty.
(set_value_optimized_out, value_optimized_out_const): Delete.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New functions.
(value_entirely_optimized_out, value_bits_valid): Delete.
(value_copy): Take a VEC copy of the 'optimized_out' field.
(value_primitive_field): Remove special handling of optimized out.
(value_fetch_lazy): Assert that lazy values have no unavailable
regions. Use value_bits_any_optimized_out. Remove some special
handling for optimized out values.
* value.h: Add intro comment about <optimized out> and
<unavailable>.
(struct lval_funcs): Remove check_validity and check_any_valid
fields.
(set_value_optimized_out, value_optimized_out_const): Remove.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New declarations.
(value_bits_any_optimized_out): New declaration.
(value_bits_valid): Delete declaration.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this, and extend comments.
gdb/testsuite/
PR symtab/14604
PR symtab/14605
* gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
gdb_test.
echo 'void f(char *s){}main(){f((char *)1);}'|gcc -g -x c -;../gdb ./a.out -ex 'b f' -ex r
====ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6020000aaccf at pc 0x96eea7 bp 0x7fff75bdbc90 sp 0x7fff75bdbc80
READ of size 1 at 0x6020000aaccf thread T0
#0 0x96eea6 in extract_unsigned_integer .../gdb/findvar.c:108
#1 0x9df02b in val_print_string .../gdb/valprint.c:2513
[...]
0x6020000aaccf is located 1 bytes to the left of 8-byte region [0x6020000aacd0,0x6020000aacd8)
allocated by thread T0 here:
#0 0x7f45fad26b97 in malloc (/lib64/libasan.so.1+0x57b97)
#1 0xdb3409 in xmalloc common/common-utils.c:45
#2 0x9d8cf9 in read_string .../gdb/valprint.c:1845
#3 0x9defca in val_print_string .../gdb/valprint.c:2502
[..]
====ABORTING
gdb/
2014-08-18 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix -fsanitize=address on unreadable inferior strings.
* valprint.c (val_print_string): Fix access before BUFFER.
This comment is no longer true for watchpoints since commit 31e77af2
(PR breakpoints/7143 - Watchpoint does not trigger when first set).
gdb/testsuite/
* gdb.base/watchpoint-hw-hit-once.c (main): Update comment.
I thought that this home made implementation of a vector could be
replaced by the more standard VEC. The implementation seems to predate
the introduction of vec.h, so that would explain why it exists.
Ran make check before and after, no new failures.
gdb/ChangeLog:
2014-08-19 Simon Marchi <simon.marchi@ericsson.com>
* target.c (target_struct_size): Remove.
(target_struct_allocsize): Remove.
(DEFAULT_ALLOCSIZE): Remove.
(target_ops_p): New typedef.
(DEF_VEC_P (target_ops_p)): New vector type.
(target_structs): Change type to VEC (target_ops_p).
(add_target_with_completer): Replace "push" code by VEC_safe_push.
(find_default_run_target): Rewrite for loop following changes to
target_structs.
Before FreeBSD-8 there was/is no arm support from the OS side.
FreeBSD-9.x added ARM support but only for the OABI.
From FreeBSD-10 upwards there is EABI support.
* Makefile.am: Add FreeBSD ARM support.
* Mafefile.in: Regenerate.
* configure.tgt: Add FreeBSD ARM support.
* config/te-armfbsdeabi.h: New file.
* config/te-armfbsdvfp.h: Likewise.
readability and also fixes some minor issues.
S/390: Split disassembler routine into smaller functions
S/390: Fix disassembler's treatment of signed/unsigned operands
S/390: Fix off-by-one error in disassembler initialization
S/390: Simplify opcode search loop in disassembler
S/390: Drop function pointer dereferences in disassembler
S/390: Various minor simplifications in disassembler
The given type is expected to always be a TYPE_CODE_PTR, for which
resolve_dynamic_type does nothing. So this patch removes this call.
gdb/ChangeLog:
* value.c (value_from_pointer): Remove use of resolve_dynamic_type.
Adjust code accordingly. Adjust function description comment.
In gdb.base/watchpoint-hw-hit-once.exp, test scans source and set
breakpoint on the line having "break-at-exit",
gdb_breakpoint [gdb_get_line_number "break-at-exit"]
However, in watchpoint-hw-hit-once.c, there are two lines having
this key word:
dummy = 1; /* Stub to catch break-at-exit after WATCHEE has been hit. */
dummy = 2; /* break-at-exit */
so the test sets breakpoint on the first one, while I think it is
expected to set breakpoint on the second one, as far as I can tell
from the comments in watchpoint-hw-hit-once.c:
/* Stub lines are present as no breakpoints/watchpoint gets hit if current PC
already stays on the line PC while entering "step"/"continue". */
This patch is to change the source matching pattern so that test
can correctly set breakpoint on the right line. This patch fixes
a fail we found on arm-none-eabi target.
(gdb) PASS: gdb.base/watchpoint-hw-hit-once.exp: continue
continue^M
Continuing.^M
^M
*** EXIT code 0^M
[Inferior 1 (Remote target) exited normally]^M
(gdb) FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit (the program exited)
Run it again on x86_64-linux, no result changes.
gdb/testsuite:
2014-08-19 Yao Qi <yao@codesourcery.com>
* gdb.base/watchpoint-hw-hit-once.exp: Set breakpoint on the
right line.
Hi,
When we pass "-mfloat-abi=hard" flag in the GDB testing, we see the
following fails,
FAIL: gdb.base/callfuncs.exp: p t_float_complex_values(fc1, fc2)
FAIL: gdb.base/callfuncs.exp: p t_float_complex_many_args(fc1, fc2, fc3, fc4, fc1, fc2, fc3, fc4, fc1, fc2, fc3, fc4, fc1, fc2, fc3, fc4)
FAIL: gdb.base/callfuncs.exp: p t_double_complex_values(dc1, dc2)
FAIL: gdb.base/callfuncs.exp: p t_double_complex_many_args(dc1, dc2, dc3, dc4, dc1, dc2, dc3, dc4, dc1, dc2, dc3, dc4, dc1, dc2, dc3, dc4)
FAIL: gdb.base/callfuncs.exp: p t_long_double_complex_values(ldc1, ldc2)
FAIL: gdb.base/callfuncs.exp: p t_long_double_complex_many_args(ldc1, ldc2, ldc3, ldc4, ldc1, ldc2, ldc3, ldc4, ldc1, ldc2, ldc3, ldc4, ldc1, ldc2, ldc3, ldc4)
FAIL: gdb.base/callfuncs.exp: call inferior func with struct - returns float _Complex
FAIL: gdb.base/callfuncs.exp: call inferior func with struct - returns double _Complex
The hard-VFP ABI was supported by GDB overal, done by this patch
https://sourceware.org/ml/gdb-patches/2009-07/msg00686.html but
"vectors and complex types are not currently supported", mentioned in
the patch. As a result, these tests fail.
This patch is to support _Complex types in hard-VFP abi. As specified
in "7.1.1, Procedure Call Standard for the ARM Arch", the layout of
_Complex types is a struct, which is identical to the layout on amd64,
so I copy Mark's comments to amd64 support.
Regression tested on arm-none-eabi target. OK to apply?
gdb:
2014-08-19 Yao Qi <yao@codesourcery.com>
* arm-tdep.c (arm_vfp_cprc_sub_candidate): Handle _Complex
types.
Directories that don't use libtool need to add -ldl (on most *nix
hosts) to provide dlopen for libbfd.
config/
* plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to
LIBS via AC_SEARCH_LIBS.
gdb/
* acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl.
* config.in: Regenerate.
sim/ppc/
* configure.ac: Invoke AC_PLUGINS.
* config.in: Regenerate.
and regen lots of configure files.
* msp430-sim.c: Move static hardware multiply support variables
from here...
* msp430-sim.h (msp430_cpu_state): ... into here ...
* msp430-sim.c (get_op, put_op): ... and update references to use
the msp430_cpu_state structure.
This introduces common-debug.h. This holds the functions debug_printf
and debug_vprintf, two functions that the common code can use to print
debugging messages. Clients of the common code are expected to
implement debug_vprintf; a debug_vprintf function is written from
scratch for GDB, and gdbserver's existing debug_printf is repurposed
as debug_vprintf.
common/agent.c is changed to use debug_vprintf rather than
defining the macro DEBUG_AGENT depending on GDBSERVER.
nat/i386-dregs.c is changed to use the externally-implemented
debug_printf, rather than defining it itself.
gdb/ChangeLog:
* common/common-debug.h: New file.
* common/common-debug.c: Likewise.
* debug.c: Likewise.
* Makefile.in (SFILES): Add common/common-debug.c.
(HFILES_NO_SRCDIR): Add common/common-debug.h.
(COMMON_OBS): Add common-debug.o and debug.o.
(common-debug.o): New rule.
* common/common-defs.h: Include common-debug.h.
* common/agent.c (debug_agent_printf): New function.
(DEBUG_AGENT): Redefine.
* nat/i386-dregs.c (debug_printf): Undefine.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Add common/common-debug.c.
(OBS): Add common-debug.o.
(common-debug.o): New rule.
* debug.h (debug_printf): Don't declare.
* debug.c (debug_printf): Renamed and rewritten as...
(debug_vprintf): New function.
This commit moves the inclusion of print-utils.h to common-defs.h
and removes all other inclusions.
gdb/ChangeLog:
* common/common-defs.h: Include print-utils.h.
* utils.h: Do not include print-utils.h.
gdb/gdbserver/ChangeLog:
* utils.h: Do not include print-utils.h.
This introduces common-types.h. This file defines various standard
types used by gdb and gdbserver.
Currently these types are conditionally defined based on GDBSERVER.
The long term goal is to remove all such tests; however, this is
difficult as currently gdb uses definitions from BFD. In the meantime
this is still a step in the right direction.
gdb/ChangeLog:
* common/common-types.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/common-types.h.
* common/common-defs.h: Include common-types.h.
* defs.h (gdb_byte, CORE_ADDR, CORE_ADDR_MAX, LONGEST)
(ULONGEST): Remove.
gdb/gdbserver/ChangeLog:
* server.h: Add static assertion.
(gdb_byte, CORE_ADDR, LONGEST, ULONGEST): Remove.
This introduces common/errors.h. This holds some error- and warning-
related declarations that can be used by the code in common, nat and
target. Some of the declared functions must be provided by the client
as documented by the header file comments.
gdb/ChangeLog:
* common/errors.h: New file.
* common/errors.c: Likewise.
* Makefile.in (SFILES): Add common/errors.c.
(HFILES_NO_SRCDIR): Add common/errors.h.
(COMMON_OBS): Add errors.o.
(errors.o): New rule.
* common/common-defs.h: Include errors.h.
* utils.h (perror_with_name, error, verror, warning, vwarning):
Don't declare.
* common/common-utils.h: (malloc_failure, internal_error):
Likewise.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Add common/errors.c.
(OBS): Add errors.o.
(IPA_OBS): Add errors-ipa.o.
(errors.o): New rule.
(errors-ipa.o): Likewise.
* utils.h (perror_with_name, error, warning): Don't declare.
* utils.c (warning): Renamed and rewritten as...
(vwarning): New function.
(error): Renamed and rewritten as...
(verror): New function.
(internal_error): Renamed and rewritten as...
(internal_verror): New function.
While working on internal_vproblem I noticed that the error/warning
message is suppressed if problem->should_quit is internal_problem_yes
or internal_problem_no. This behaviour seems wrong. This commit
modifies internal_vproblem to emit the message regardless of the
user's settings.
gdb/
2014-08-19 Gary Benson <gbenson@redhat.com>
* utils.c (internal_vproblem): Always print the message.
The testcase generates an assembly file where a second DW_AT_upper_bound
attribute gets generated in the array range. This was definitely
unintentional, and I only noticed this after pushing the testcase,
when dumping one more time the DWARF data using readelf.
This patch fixes it.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/data-loc.exp: Remove second DW_AT_upper bound
attribute in array range.
than 4. This affects DWARF debug info generation in particular.
* config/tc-rl78.c (md_apply_fix): Correct handling of small sized
RELOC_RL78_DIFF fixups.
This testcase allows us to test the proper processing of both
DW_AT_data_location and DW_OP_push_object_address using a hand-crafted
testcase duplicating how we expect the Ada compiler to represent
unbounded arrays.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/data-loc.c, gdb.dwarf2/data-loc.exp: New files.
Consider an Ada array type where the DWARF debugging info for
at least one of the bounds involves an expression containing
a DW_OP_push_object_address operation. Trying to "ptype" that
type currently yields:
(gdb) ptype foo.array_type
type = array (Location address is not set.
This patch improves ada-typeprint by adding handling of the situation
where an array range type has dynamic bounds. In that case, it prints
the array bounds using Ada's typical syntax for unbounded ranges "<>":
(gdb) ptype array_type
type = array (<>) of integer
gdb/ChangeLog:
* ada-typeprint.c (type_is_full_subrange_of_target_type):
Return 0 if TYPE is dynamic.
(print_range): Add handling of dynamic ranges.
gdb/ChangeLog:
* gdbtypes.h (struct main_type): Add field "data_location".
(TYPE_DATA_LOCATION, TYPE_DATA_LOCATION_BATON)
(TYPE_DATA_LOCATION_ADDR, TYPE_DATA_LOCATION_KIND): New macros.
* gdbtypes.c (is_dynamic_type): Return 1 if the type has
a dynamic data location.
(resolve_dynamic_type): Add DW_AT_data_location handling.
(copy_recursive, copy_type): Copy the data_location information
when present.
* dwarf2read.c (set_die_type): Add DW_AT_data_location handling.
* value.c (value_from_contents_and_address): Add
DW_AT_data_location handling.
Now that the OP_VAR_VALUE section of this function has been reorganized
a bit, we can fall-back on standard evaluation when static fixing is
not required. This patch does that, but being exclusive about when
static fixing has to be used, rather than doing it all the time when
noside is EVAL_AVOID_SIDE_EFFECTS.
This will pave the way for later when we want to evaluate entities
that have no GNAT encodings related to them but dynamic properties
instead. In that case, we expect the standard evaluation to resolve
those dynamic properties for us, even in no-side-effect mode.
gdb/ChangeLog:
* ada-lang.c (ada_evaluate_subexp) <OP_VAR_VALUE>:
When noside is EVAL_AVOID_SIDE_EFFECTS, only return a statically
fixed value for records and unions for which some GNAT encodings
are present.
The OP_VAR_VALUE branch in ada_evaluate_subexp is written with
multiple "if ... else if ... else if ... else ..." block. But
in practice, these blocks all either goto out of that block of
code, or return.
This patch rewrites this code slightly by replacing the "else if"-s
by simple "if"s. This should better reflect the ideal processing
where we try to do a standard eval whenever possible, and only
do something else when the standard eval does not work. On a pratical
level, this patch makes it easier to fall through to the default
processing when none of the special situations are detected, thus
making it easier to add more handlers of those special situations;
or to remove them as they no longer become necessary!
gdb/ChangeLog:
* ada-lang.c (ada_evaluate_subexp) <OP_VAR_VALUE>: Slight code
rewrite to avoid "else if" and "else" constructs. Should be
a no-op in practice.
I just happen to notice that a lexical block was missing one
indentation level.
gdb/ChangeLog:
* ada-lang.c (ada_evaluate_subexp) <OP_VAR_VALUE>: Fix identation
of lexical block.
This probably could be fixed by making changes in relocate_section for
ifunc, but it's simpler to disable the optimisation for ifunc.
* elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol): Don't attempt to
use dynrelocs for ifunc.
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol): Similarly.
PR 17287
bfd/
* elflink.c (on_needed_list): Only consider libraries that have
been loaded.
ld/
* ld.texinfo (--as-needed): Clarify that references from libraries
must be from needed libraries.
ld/testsuite/
* ld-plugin/needed3.c: New file.
* ld-elf/shared.exp: Add needed3 test.
This is a fix for PR c++/17132.
If this new argument is set to EVAL_AVOID_SIDE_EFFECTS, then the object's
memory will not be read while picking the best overload match.
gdb/
* eval.c: Update all calls to find_overload_match.
* valarith.c: Likewise.
(value_user_defined_cpp_op, value_user_defined_op): New
argument NOSIDE. Update all callers.
* valops.c (find_overload_match): New argument NOSIDE.
* value.h (find_overload_match): Update signature.
gdb/testsuite
* gdb.cp/pr17132.cc: New file.
* gdb.cp/pr17132.exp: New file.
gdb/
* python/lib/gdb/command/xmethods.py (set_xm_status1): Use the
'items' methods instead of 'iteritems' method on dictionaries.
gdb/testsuite/
* gdb.python/py-xmethods.py (A_getarrayind)
(E_method_char_worker.__call__, E_method_int_worker.__call__):
Use 'print' with function call syntax.
(E_method_matcher.match): Fix tab vs space indentation mixup.
This include is needed because gdbarch_dummy_id needs the full
definition of struct frame_id.
gdb/ChangeLog:
* gdbarch.sh: #include "frame.h" in gdbarch.h. Delete "struct
frame_info" partial declaration.
* gdbarch.h: Regenerate.
Tested on x86_64-linux by rebuilding GDB.
I added proc generate_tracefile in this patch
https://sourceware.org/ml/gdb-patches/2014-03/msg00591.html but
tfile.exp isn't skipped as changelog entry said:
* gdb.trace/tfile.exp: Skip the test if generate_tracefile
return 0.
it is a mistake I made at the last minute. Patch below fixed it.
gdb/testsuite:
2014-08-15 Yao Qi <yao@codesourcery.com>
* gdb.trace/tfile.exp: Return -1 if generate_tracefile returns
false.
