* ppc-instructions (lswx): Do the register control with the
register count. Initialize the right register in the loop.
(mtfsfi) : Correct prefix for the instruction.
* cp1.c (fpu_format_name): New function to replace...
(DOFMT): This. Delete, and update all callers.
(fpu_rounding_mode_name): New function to replace...
(RMMODE): This. Delete, and update all callers.
* interp.c: Move FPU support routines from here to...
* cp1.c: Here. New file.
* Makefile.in (SIM_OBJS): Add cp1.o to object list.
(cp1.o): New target.
* configure.in (mipsisa32*-*-*, mipsisa64*-*-*): New targets.
* mips.igen (mips32, mips64): New models, add to all instructions
and functions as appropriate.
(loadstore_ea, check_u64): New variant for model mips64.
(check_fmt_p): New variant for models mipsV and mips64, remove
mipsV model marking fro other variant.
(SLL) Rename to...
(SLLa) this.
(CLO, CLZ, MADD, MADDU, MSUB, MSUBU, MUL, SLLb): New instructions
for mips32 and mips64.
(DCLO, DCLZ): New instructions for mips64.
* mips.igen (BREAK, LUI, ORI, SYSCALL, XORI): Print
immediate or code as a hex value with the "%#lx" format.
(ANDI): Likewise, and fix printed instruction name.
cpu struct.
(sim_hw_configure): Connect the capture input/output events.
* sim-main.h (_sim_cpu): New member hw_cpu.
(m68hc11cpu_set_oscillator): Declare.
(m68hc11cpu_clear_oscillator): Declare.
(m68hc11cpu_set_port): Declare.
* dv-m68hc11.c (m68hc11_options): New for oscillator commands.
(m68hc11cpu_ports): New input ports and output ports to reflect
the HC11 IOs.
(m68hc11_delete): Cleanup any running oscillator.
(attach_m68hc11_regs): Create the input oscillators.
(make_oscillator): New function.
(find_oscillator): New function.
(oscillator_handler): New function.
(reset_oscillators): New function.
(m68hc11cpu_port_event): Handle the new input ports.
(m68hc11cpu_set_oscillator): New function.
(m68hc11cpu_clear_oscillator): New function.
(get_frequency): New function.
(m68hc11_option_handler): New function.
(m68hc11cpu_set_port): New function.
(m68hc11cpu_io_write): Post the port output events.
* dv-m68hc11spi.c (set_bit_port): Use m68hc11cpu_set_port to set
the output port value.
* dv-m68hc11tim.c (m68hc11tim_port_event): Handle CAPTURE event
by latching the TCNT value in the register.
vector address according to cpu mode.
(interrupts_initialize): Move reset portion to the above.
(interrupt_names): New table to give a name to interrupts.
(idefs): Handle pulse accumulator interrupts.
(interrupts_info): Print the interrupt history.
(interrupt_option_handler): New function.
(interrupt_options): New table of options.
(interrupts_update_pending): Keep track of when interrupts are
raised and implement breakpoint-on-raise-interrupt.
(interrupts_process): Keep track of when interrupts are taken
and implement breakpoint-on-interrupt.
* interrupts.h (struct interrupt_history): Define.
(struct interrupt): Keep track of the interrupt history.
(interrupts_reset): Declare.
(interrupts_initialize): Update prototype.
* m68hc11_sim.c (cpu_reset): Reset interrupts.
(cpu_initialize): Cleanup.
* sim-main.h (status_UX, status_SX, status_KX, status_TS)
(status_PX, status_MX, status_CU0, status_CU1, status_CU2)
(status_CU3): New definitions.
* sim-main.h (ExceptionCause): Add new values for MIPS32
and MIPS64: MDMX, MCheck, CacheErr. Update comments
for DebugBreakPoint and NMIReset to note their status in
MIPS32 and MIPS64.
(SignalExceptionMDMX, SignalExceptionWatch, SignalExceptionMCheck)
(SignalExceptionCacheErr): New exception macros.
* mips.igen (check_fpu): Enable check for coprocessor 1 usability.
* sim-main.h (COP_Usable): Define, but for now coprocessor 1
is always enabled.
(SignalExceptionCoProcessorUnusable): Take as argument the
unusable coprocessor number.
* mips.igen (check_fmt, check_fmt_p): New functions to check
whether specific floating point formats are usable.
(ABS.fmt, ADD.fmt, CEIL.L.fmt, CEIL.W, DIV.fmt, FLOOR.L.fmt)
(FLOOR.W.fmt, MOV.fmt, MUL.fmt, NEG.fmt, RECIP.fmt, ROUND.L.fmt)
(ROUND.W.fmt, RSQRT.fmt, SQRT.fmt, SUB.fmt, TRUNC.L.fmt, TRUNC.W):
Use the new functions.
(do_c_cond_fmt): Remove format checks...
(C.cond.fmta, C.cond.fmtb): And move them into all callers.
* mips.igen (loadstore_ea): New function to do effective
address calculations.
(do_load, do_load_left, do_load_right, LL, LDD, PREF, do_store,
do_store_left, do_store_right, SC, SCD, PREFX, SWC1, SWXC1,
CACHE): Use loadstore_ea to do effective address computations.
* mips.igen (PREFX): Tweak instruction opcode fields (i.e.,
add a comma) so that it more closely match the MIPS ISA
documentation opcode partitioning.
(PREF): Put useful names on opcode fields, and include
instruction-printing string.
* mips.igen (check_u64): New function which in the future will
check whether 64-bit instructions are usable and signal an
exception if not. Currently a no-op.
(DADD, DADDI, DADDIU, DADDU, DDIV, DDIVU, DMULT, DMULTU, DSLL,
DSLL32, DSLLV, DSRA, DSRA32, DSRAV, DSRL, DSRL32, DSRLV, DSUB,
DSUBU, LD, LDL, LDR, LLD, LWU, SCD, SD, SDL, SDR, DMxC1, LDXC1,
LWXC1, SDXC1, SWXC1, DMFC0, DMTC0): Use check_u64.
* mips.igen (check_fpu): New function which in the future will
check whether FPU instructions are usable and signal an exception
if not. Currently a no-op.
(ABS.fmt, ADD.fmt, BC1a, BC1b, C.cond.fmta, C.cond.fmtb,
CEIL.L.fmt, CEIL.W, CxC1, CVT.D.fmt, CVT.L.fmt, CVT.S.fmt,
CVT.W.fmt, DIV.fmt, DMxC1, DMxC1, FLOOR.L.fmt, FLOOR.W.fmt, LDC1,
LDXC1, LWC1, LWXC1, MADD.D, MADD.S, MxC1, MOV.fmt, MOVtf,
MOVtf.fmt, MOVN.fmt, MOVZ.fmt, MSUB.D, MSUB.S, MUL.fmt, NEG.fmt,
NMADD.D, NMADD.S, NMSUB.D, NMSUB.S, RECIP.fmt, ROUND.L.fmt,
ROUND.W.fmt, RSQRT.fmt, SDC1, SDXC1, SQRT.fmt, SUB.fmt, SWC1,
SWXC1, TRUNC.L.fmt, TRUNC.W): Use check_fpu.
* mips.igen (do_load_left, do_load_right): Move to be immediately
following do_load.
(do_store_left, do_store_right): Move to be immediately following
do_store.
* mips.igen: Add some additional comments about supported
models, and about which instructions go where.
(BC1b, MFC0, MTC0, RFE): Sort supported models in the same
order as is used in the rest of the file.
* mips.igen (ADD, ADDI, DADDI, DSUB, SUB): Add comment
indicating that ALU32_END or ALU64_END are there to check
for overflow.
(DADD): Likewise, but also remove previous comment about
overflow checking.
* mips.igen (ADDI): Print immediate value.
(BREAK): Print code.
(DADDIU, DSRAV, DSRLV): Print correct instruction name.
(SLL): Print "nop" specially, and don't run the code
that does the shift for the "nop" case.
