st(1) ... st(7) will never be looked up in the hash table, so there's no
point inserting the entries. It's also not really necessary to do a 2nd
hash lookup after parsing the register number, nor is there a real
reason for having both st and st(0) entries. Plus we can easily do away
with the need for st to be first in the table.
For a long time there hasn't been a need anymore to keep together all
templates with identical mnemonics. Move the MOVQ and MOVABS ones next
to their MOV counterparts. Move the string forms of CMPSD and MOVSD next
to their CMPS / MOVS counterparts. Re-arrange what so fgar was the SSE3
section.
This makes reasonably obvious that MONITOR/MWAIT aren't suitable to
cover by CpuSSE3, but adjusting this is left for another time.
In commit 79dec6b7ba ("x86-64: optimize certain commutative
VEX-encoded insns") I missed the fact that there being subtraction
involved here doesn't matter, as absolute differences get summed up.
This way not only the overall (source) table size shrinks by quite a
bit and the risk of related templates going out of sync with one another
gets lowered, but also (dis)similarities between neighboring templates
become easier to spot.
Note that for certain SSE2AVX templates this results in benign attribute
changes:
- LDMXCSR and STMXCSR: NoAVX gets set,
- MOVMSKPS, PMOVMSKB, PEXTR{B,W} (register destination), and PINSR{B,W}
(register source): IgnoreSize and NoRex64 get set,
- CVT{DQ,PS}2PD, CVTSD2SS, MOVMSKPD, MOVDDUP, PMOV{S,Z}X{BW,WD,DQ}, and
ROUNDSD: NoRex64 gets set,
- CVTSS2SD, INSERTPS, PEXTRW (memory destination), PINSRW (memory
source), and PMOV{S,Z}X{BD,WQ,BQ}: IgnoreSize gets set.
Similarly the "normal" (non-SSE2AVX)
- non-64-bit CVTS{I,S}2SD forms get NoRex64 set,
- CMP{EQ,ORD,NEQ,UNORD}{P,S}{S,D} forms get C set,
all again in a benign way.
The remaining differences in the generated table are due to re-ordering
of entries in the course of being folded into templates.
The table entries are more natural to read (and slightly shorter) when
the prefixes, like is the case for VEX/XOP/EVEX-encoded entries, are
specified as part of the opcode. This is particularly noticable for
side-by-side legacy and SSE2AVX entries.
An implication is that we now need to use "unsigned long long" for the
initially parsed opcode in i386-gen. I don't expect this to be an issue.
Now that all base opcodes are only at most 2 bytes in size, shrink its
template field to just as much. By also shrinking extension_opcode and
operands to just what they really need, we can free up an entire 32-bit
slot (plus 4 left bits past the bitfields themselves).
At present this alters sizeof(struct insn_template) only for 32-bit
builds. In 64-bit builds it instead leaves a padding hole that will
allow to buffer future growth of other fields (opcode_modifier,
cpu_flags, operand_types[]).
Just like is already done for VEX/XOP/EVEX encoded insns, record the
encoding space information in the respective opcode modifier field. Do
this again without changing the source table, but rather by deriving the
values from their existing source representation.
While all of MMX, SSE, and SSE2 are included in "generic64", they can be
individually disabled. There are two MOVQ forms lacking respective
attributes. While the MMX one would get refused anyway (due to MMX
registers not recognized with .nommx), the assembler did happily accept
the SSE2 form. Add respective CPU settings to both, paralleling what the
MOVD counterparts have.
The code was checking wrong bit for sign extension. It caused it
to zero-extend instead of sign-extend the immediate value.
2021-03-25 Abid Qadeer <abidh@codesourcery.com>
opcodes/
* nios2-dis.c (nios2_print_insn_arg): Fix sign extension of
immediate in br.n instruction.
gas/
* testsuite/gas/nios2/brn.s: New.
* testsuite/gas/nios2/brn.d: New.
For VEX-encoded ones, all three involved vector registers have to be
distinct. For EVEX-encoded ones an actual mask register has to be in use
and zeroing-masking cannot be used (violation of either will #UD).
Additionally both involved vector registers have to be distinct for
EVEX-encoded gathers.
For INVLPGB the operand count was wrong (besides %edx there's also %ecx
which is an input to the insn). In this case I see little sense in
retaining the bogus 2-operand template. Plus swapping of the operands
wasn't properly suppressed for Intel syntax.
For PVALIDATE, RMPADJUST, and RMPUPDATE bogus single operand templates
were specified. These get retained, as the address operand is the only
one really needed to expressed non-default address size, but only for
compatibility reasons. Proper multi-operand insn get introduced and the
testcases get adjusted / extended accordingly.
While at it also drop the redundant definition of __amd64__ - we already
have x86_64 defined (or not) to distinguish 64-bit and non-64-bit cases.
In the majority of cases we can easily determine the length from the
encoding, irrespective of whether a prefix is specified there as well.
We further don't even need to record the value in the table entries, as
it's easy enough to determine it (without any guesswork, unless an insn
with major opcode 00 appeared that requires a 2nd opcode byte to be
specified explicitly) when installing the chosen template for further
processing.
Should an encoding appear which
- has a major opcode byte of 66, F3, or F2,
- requires a 2nd opcode byte to be specified explicitly,
- doesn't have a mandatory prefix
we'd need to convert all templates presently encoding a mandatory prefix
this way to the Prefix_0X<nn> model to eliminate the respective guessing
i386-gen does.
Just like is already done for legacy encoded insns, record the mandatory
prefix information in the respective opcode modifier field. Do this
without changing the source table, but rather by deriving the values from
their existing source representation.
This is in preparation of opcode_length going away as a field in the
templates. Identify pseudo prefixes by a base opcode of zero instead:
No real prefix has an opcode of zero. This at the same time allows
dropping a curious special case from i386-gen.
Since most attributes are identical for all pseudo prefixes, take the
opportunity and also template them.
In preparation to use PREFIX_0X<nn> attributes also in VEX/XOP/EVEX
encoding templates, renumber the pseudo-enumerators such that their
values can then also be used directly in the respective prefix bit
fields.
Commit 8b65b8953a ("x86: Remove the prefix byte from non-VEX/EVEX
base_opcode") used the opcodeprefix field for two distinct purposes. In
preparation of having VEX/XOP/EVEX and non-VEX templates become similar
in the representatioon of both encoding space and opcode prefixes, split
the field to have a separate one holding an insn's opcode space.
Commit 6ff00b5e12 ("x86/Intel: correct permitted operand sizes for
AVX512 scatter/gather") brought the assembler side of AVX512 S/G insn
handling in line with AVX2's, but the disassembler side was forgotten.
This has the benefit of
- allowing to fold a number of table entries,
- rendering a few #define-s and enumerators unused.
Some of the enumerators have ended up misplaced under the general
current ordering scheme. Move them (and their table entries) around
accordingly. Add a couple of blank lines as separators when close to
code being touched anyway. Also drop the odd 0F from 0FXOP (there's no
"0f" involved there anywhere) infixes where the respective enum gets
played with anyway.
When the VEX.L=1 decode matches that of both EVEX.L'L=1 and EVEX.L'L=2
(typically when all three are invalid) the (smaller) VEX table entry can
be reused by EVEX, instead of duplicating data. (Note that XM and XMM as
well as EXxmm_md and EXd are equivalent at least for the purposes here.)
The order of decodes influences the overall number of table entries.
Reduce table size quite a bit by first decoding few-alternatives
attributes common to all valid leaves.
This also adds a PREFIX_DATA 7531c61332 ("x86: simplify decode of
opcodes valid with (embedded) 66 prefix only") missed to apply to
vbroadcastf64x4.
The order of decodes influences the overall number of table entries.
Reduce table size quite a bit by first decoding few-alternatives
attributes common to all valid leaves.
The order of decodes influences the overall number of table entries.
Reduce table size quite a bit by first decoding few-alternatives
attributes common to all valid leaves.
The order of decodes influences the overall number of table entries.
Reduce table size quite a bit by first decoding few-alternatives
attributes common to all valid leaves.
All encodings not used in this range are (reserved) NOPs. Hence their
decoding should be fully consistent. For this to work the PREFIX_IGNORED
logic needs slightly extending, such that the attribute will also
- have an effect when used inside prefix_table[], yet without always
falling back to using slot 0,
- cause prefixes marked as ignored while decoding through prefix_table[]
to no longer be considered decoded, when encountered in a subsequent
decoding step.
In adjacent code also drop meaningless PREFIX_OPCODE.
RepPrefixOk, HLEPrefixOk, and NoTrackPrefixOk can't be specified
together, so can share an enum-like field. IsLockable can be inferred
from HLE setting and hence only needs specifying when neither of them
is present.
Despite SYSEXIT being an Intel-only insn in long mode, its behavior
there is similar to SYSRET's: Depending on REX.W execution continues in
either 64-bit or compatibility mode. Hence distinguishing by suffix is
as necessary here as it is there.
Having this count explicitly in the table is redundant and (even if just
slightly) disturbs clarity. Infer the count from the number of operands
actually found.
Also convert the "no operands" indicator from "{ 0 }" to just "{}", as
that (now) ends up being easier to parse.
Make the opcode/riscv-opc.c and include/opcode/riscv.h tidy, move the
spec versions stuff to bfd/cpu-riscv.h. Also move the csr stuff and
ext_version_table to gas/config/tc-riscv.c for internal use. To avoid
too many repeated code, define general RISCV_GET_SPEC_NAME/SPEC_CLASS
macros. Therefore, assembler/dis-assembler/linker/gdb can get all spec
versions related stuff from cpu-riscv.h and cpu-riscv.c, since the stuff
are defined there uniformly.
bfd/
* Makefile.am: Added cpu-riscv.h.
* Makefile.in: Regenerated.
* po/SRC-POTFILES.in: Regenerated.
* cpu-riscv.h: Added to support spec versions controlling.
Also added extern arrays and functions for cpu-riscv.c.
(enum riscv_spec_class): Define all spec classes here uniformly.
(struct riscv_spec): Added for all specs.
(RISCV_GET_SPEC_CLASS): Added to reduce repeated code.
(RISCV_GET_SPEC_NAME): Likewise.
(RISCV_GET_ISA_SPEC_CLASS): Added to get ISA spec class.
(RISCV_GET_PRIV_SPEC_CLASS): Added to get privileged spec class.
(RISCV_GET_PRIV_SPEC_NAME): Added to get privileged spec name.
* cpu-riscv.c (struct priv_spec_t): Replaced with struct riscv_spec.
(riscv_get_priv_spec_class): Replaced with RISCV_GET_PRIV_SPEC_CLASS.
(riscv_get_priv_spec_name): Replaced with RISCV_GET_PRIV_SPEC_NAME.
(riscv_priv_specs): Moved below.
(riscv_get_priv_spec_class_from_numbers): Likewise, updated.
(riscv_isa_specs): Moved from include/opcode/riscv.h.
* elfnn-riscv.c: Included cpu-riscv.h.
(riscv_merge_attributes): Initialize in_priv_spec and out_priv_spec.
* elfxx-riscv.c: Included cpu-riscv.h and opcode/riscv.h.
(RISCV_UNKNOWN_VERSION): Moved from include/opcode/riscv.h.
* elfxx-riscv.h: Removed extern functions to cpu-riscv.h.
gas/
* config/tc-riscv.c: Included cpu-riscv.h.
(enum riscv_csr_clas): Moved from include/opcode/riscv.h.
(struct riscv_csr_extra): Likewise.
(struct riscv_ext_version): Likewise.
(ext_version_table): Moved from opcodes/riscv-opc.c.
(default_isa_spec): Updated type to riscv_spec_class.
(default_priv_spec): Likewise.
(riscv_set_default_isa_spec): Updated.
(init_ext_version_hash): Likewise.
(riscv_init_csr_hash): Likewise, also fixed indent.
include/
* opcode/riscv.h: Moved stuff and make the file tidy.
opcodes/
* riscv-dis.c: Included cpu-riscv.h, and removed elfxx-riscv.h.
(default_priv_spec): Updated type to riscv_spec_class.
(parse_riscv_dis_option): Updated.
* riscv-opc.c: Moved stuff and make the file tidy.
There is a tiny error left in dwarf.c:read_leb128 after Nick fixed the
signed overflow problem in code I wrote. It's to do with sleb128
values that have unnecessary excess bytes. For example, -1 is
represented as 0x7f, the most efficient encoding, but also as
0xff,0x7f or 0xff,0xff,0x7f and so on. None of these sequences
overflow any size signed value, but read_leb128 will report an
overflow given enough excess bytes. This patch fixes that problem,
and since the proper test for signed values with excess bytes can
easily be adapted to also test a sleb byte with just some bits that
overflow the result, I changed the code to not use signed right
shifts. (The C standard ISO/IEC 9899:1999 6.5.7 says signed right
shifts of negative values have an implementation defined value. A
long time ago I even used a C compiler for a certain microprocessor
that always did unsigned right shifts. Mind you, it is very unlikely
to be compiling binutils with such a compiler.)
bfd/
* wasm-module.c: Guard include of limits.h.
(CHAR_BIT): Provide backup define.
(wasm_read_leb128): Use CHAR_BIT to size "result" in bits.
Correct signed overflow checking.
opcodes/
* wasm32-dis.c: Include limits.h.
(CHAR_BIT): Provide backup define.
(wasm_read_leb128): Use CHAR_BIT to size "result" in bits.
Correct signed overflow checking.
binutils/
* dwarf.c: Include limits.h.
(CHAR_BIT): Provide backup define.
(read_leb128): Use CHAR_BIT to size "result" in bits. Correct
signed overflow checking.
* testsuite/binutils-all/pr26548.s,
* testsuite/binutils-all/pr26548.d,
* testsuite/binutils-all/pr26548e.d: New tests.
* testsuite/binutils-all/readelf.exp: Run them.
(readelf_test): Drop unused "xfails" parameter. Update all uses.
CVTPI2PD with a memory operand, unlike CVTPI2PS, doesn't engage MMX
logic. Therefore it
- has a proper AVX equivalent (CVTDQ2PD) and hence can be subject to
SSE2AVX translation and SSE checking,
- should not record MMX use in the respective ELF note.
opcodes/
* s390-mkopc.c (main): Accept arch14 as cpu string.
* s390-opc.txt: Add new arch14 instructions.
include/
* opcode/s390.h (enum s390_opcode_cpu_val): Add
S390_OPCODE_ARCH14.
gas/
* config/tc-s390.c (s390_parse_cpu): New entry for arch14.
* doc/c-s390.texi: Document arch14 march option.
* testsuite/gas/s390/s390.exp: Run the arch14 related tests.
* testsuite/gas/s390/zarch-arch14.d: New test.
* testsuite/gas/s390/zarch-arch14.s: New test.
Right now, these libraries hardwire -L../intl -lintl on a few fixed
platforms, which works fine on those platforms but on other platforms
leads to shared libraries that lack libintl_* symbols when configured
--with-included-gettext, and/or static libraries that contain libintl as
*another* static library. If we instead use the LIBINTL variable
defined in ../intl/config.intl, this gives us the right thing on all
three classes of platform (gettext in libc, gettext in system libintl,
gettext in ../intl/libintl.a).. This also means we can rip out some
Darwin-specific machinery from configure.ac and also simplify the Cygwin
side.
This also means that the libctf testsuite (and other places that include
libbfd, libopcodes or libctf) don't need to grow libintl dependencies
just on account of those libraries (though they still need such
dependencies if they themselves use gettext machinery).
bfd/ChangeLog
2021-02-03 Nick Alcock <nick.alcock@oracle.com>
* configure.ac (SHARED_LIBADD): Remove explicit -lintl population in
favour of LIBINTL.
* configure: Regenerated.
libctf/ChangeLog
2021-02-02 Nick Alcock <nick.alcock@oracle.com>
* configure.ac (CTF_LIBADD): Remove explicit -lintl population in
favour of LIBINTL.
* Makefile.am (libctf_nobfd_la_LIBADD): No longer explicitly
include $(LIBINTL).
(check-DEJAGNU): Pass down to tests as well.
* configure: Regenerated.
* Makefile.in: Likewise.
opcodes/ChangeLog
2021-02-04 Nick Alcock <nick.alcock@oracle.com>
* configure.ac (SHARED_LIBADD): Remove explicit -lintl population in
favour of LIBINTL.
* configure: Regenerated.
bfd/
* elfnn-riscv.c: Indent, labels and GNU coding standards tidy,
also aligned the code.
gas/
* config/tc-riscv.c: Indent and GNU coding standards tidy,
also aligned the code.
* config/tc-riscv.h: Likewise.
include/
* opcode/riscv.h: Indent and GNU coding standards tidy,
also aligned the code.
opcodes/
* riscv-opc.c (riscv_gpr_names_abi): Aligned the code.
(riscv_fpr_names_abi): Likewise.
(riscv_opcodes): Likewise.
(riscv_insn_types): Likewise.
Error and warning messages usually starting with lower case letter,
and without the period at the end. Besides, add the prefixed "internel:"
at the beginning of the messages when they are caused internally.
Also fix indents and typos.
bfd/
* elfnn-riscv.c (riscv_merge_attributes): Fix typos of messages.
gas/
* config/tc-riscv.c: Error and warning messages tidy.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Updated.
* testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-read-only-02.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
ld/
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-01.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-05.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-06.d: Likewise.
opcodes/
* riscv-dis.c (parse_riscv_dis_option): Fix typos of message.
The GNU coding standards said the comments should be complete sentences
and end with a period and two spaces. But sometimes it should be more
cleaner when the comments only include a word or codes. Therefore, I made
the following changes after referring to other target/generic codes,
* Try to write sentences in comments, must end with a period and two spaces.
* End with two spaces without a period for codes/instructions only.
* End with one space without a period for a single word/variable only.
Besids, also rewrite/remove some comments which are obsolete or too long,
and fix indents for comments.
bfd/
* elfnn-riscv.c: Comments tidy and improvement.
* elfxx-riscv.c: Likewise.
* elfxx-riscv.h: Likewise.
gas/
* config/tc-riscv.c: Comments tidy and improvement. Also update
comment "fallthru" to "Fall through" that end with a period and
two spaces.
include/
* elf/riscv.h: Comments tidy and improvement.
* opcode/riscv-opc.h: Likewise.
* opcode/riscv.h: Likewise.
opcodes/
* riscv-dis.c: Comments tidy and improvement.
* riscv-opc.c: Likewise.
POWER10 adds some return-oriented programming (ROP) instructions and
this patch adds support for them. You will notice that they are enabled
for POWER8 and later, not just POWER10 and later. This is on purpose.
This allows the instructions to be added to POWER8 binaries that can be
run on POWER8, POWER9 and POWER10 cpus. On POWER8 and POWER9, these
instructions just act as nop's.
opcodes/
* ppc-opc.c (insert_dw, (extract_dw): New functions.
(DW, (XRC_MASK): Define.
(powerpc_opcodes) <hashchk, hashchkp, hashst, haststp>: New mnemonics.
gas/
* testsuite/gas/ppc/rop-checks.d,
* testsuite/gas/ppc/rop-checks.l,
* testsuite/gas/ppc/rop-checks.s,
* testsuite/gas/ppc/rop.d,
* testsuite/gas/ppc/rop.s: New tests.
* testsuite/gas/ppc/ppc.exp: Run them.
commit f478212851 did the regen by hand, missed a change in
ld/configure and didn't update line numbers. Fix that, and an old
regen of ld/Makefile.in with the wrong automake.
bfd/
* configure: Regenerate.
binutils/
* configure: Regenerate.
gas/
* configure: Regenerate.
gprof/
* configure: Regenerate.
ld/
* Makefile.in: Regenerate.
* configure: Regenerate.
libctf/
* configure: Regenerate.
opcodes/
* configure: Regenerate.
zlib/
* configure: Regenerate.
PR 27129
* aarch64-dis.c (determine_disassembling_preference): Move call to
aarch64_match_operands_constraint outside of the assertion.
* aarch64-asm.c (aarch64_ins_limm_1): Remove call to assert.
Replace with a return of FALSE.
Add support for the pause hint instruction, as specified in the
Zihintpause extension. The pause instruction is encoded as a
special form of a memory fence (which is available as part of the
base instruction set). The chosen encoding does not mandate any
particular memory ordering and therefore is a true hint.
bfd/
* elfxx-riscv.c (riscv_std_z_ext_strtab): Added zihintpause.
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Added
INSN_CLASS_ZIHINTPAUSE.
* testsuite/gas/riscv/pause.d: New testcase. Adding coverage for
the pause hint instruction.
* testsuite/gas/riscv/pause.s: Likewise.
include/
* opcode/riscv-opc.h: Added MATCH_PAUSE, MASK_PAUSE and DECLARE_INSN
for pause hint instruction.
* opcode/riscv.h (enum riscv_insn_class): Added INSN_CLASS_ZIHINTPAUSE.
opcodes/
* riscv-opc.c (riscv_opcodes): Add pause hint instruction.
In fact rev8/orc.b/zext.h are the aliases of grevi/gorci/pack[w], so we
should update them to INSN_ALIAS when we have supported their true instruction
in the future. Though we still use the [MATCH|MAKS]_[GREVI|GORCI|PACK|PACKW]
to encode them. Besides, the orc.b has the same encoding both in rv32 and
rv64, so we just keep one of them in the opcode table.
This patch is implemented according to the following link,
https://github.com/riscv/riscv-bitmanip/pull/101
2021-01-07 Claire Xenia Wolf <claire@symbioticeda.com>
Jim Wilson <jimw@sifive.com>
Andrew Waterman <andrew@sifive.com>
Maxim Blinov <maxim.blinov@embecosm.com>
Kito Cheng <kito.cheng@sifive.com>
Nelson Chu <nelson.chu@sifive.com>
bfd/
* elfxx-riscv.c (riscv_std_z_ext_strtab): Added zba, zbb and zbc.
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Handle INSN_CLASS_ZB*.
(riscv_get_default_ext_version): Do not check the default_isa_spec when
the version defined in the riscv_opcodes table is ISA_SPEC_CLASS_DRAFT.
* testsuite/gas/riscv/bitmanip-insns-32.d: New testcase.
* testsuite/gas/riscv/bitmanip-insns-64.d: Likewise.
* testsuite/gas/riscv/bitmanip-insns.s: Likewise.
include/
* opcode/riscv-opc.h: Added MASK/MATCH/DECLARE_INSN for ZBA/ZBB/ZBC.
* opcode/riscv.h (riscv_insn_class): Added INSN_CLASS_ZB*.
(enum riscv_isa_spec_class): Added ISA_SPEC_CLASS_DRAFT for the
frozen extensions.
opcodes/
* riscv-opc.c (riscv_opcodes): Add ZBA/ZBB/ZBC instructions.
(MASK_RVB_IMM): Used for rev8 and orc.b encoding.
https://github.com/riscv/riscv-asm-manual/pull/61
We aleady have sext.w, so just add sext.b, sext.h, zext.b, zext.h
and zext.w. In a certain sense, zext.b is not a pseudo - It is an
alias of andi. Similarly, sext.b and sext.h are aliases of other
rvb instructions, when we enable b extension; But they are pseudos
when we just enable rvi. However, this patch does not consider the
rvb cases. Besides, zext.w is only valid in rv64.
gas/
* config/tc-riscv.c (riscv_ext): New function. Use md_assemblef
to expand the zext and sext pseudos, to give them a chance to be
expanded into c-ext instructions.
(macro): Handle M_ZEXTH, M_ZEXTW, M_SEXTB and M_SEXTH.
* testsuite/gas/riscv/ext.s: New testcase.
* testsuite/gas/riscv/ext-32.d: Likewise.
* testsuite/gas/riscv/ext-64.d: Likewise.
include/
* opcode/riscv.h (M_ZEXTH, M_ZEXTW, M_SEXTB, M_SEXTH.): Added.
opcodes/
* riscv-opc.c (riscv_opcodes): Add sext.[bh] and zext.[bhw].
opcodes/
* disassemble.h (riscv_get_disassembler): Declare.
* disassemble.c (disassembler): Changed to riscv_get_disassembler.
* riscv-dis.c (riscv_get_disassembler): Check the elf privileged spec
attributes before calling print_insn_riscv.
(parse_riscv_dis_option): Same as the assembler, the priority of elf
attributes are higher than the options. If we find the privileged
attributes, but the -Mpriv-spec= is different, then output error/warning
and still use the elf attributes set.
bfd/
* elfxx-riscv.c (riscv_ext_dont_care_version): New function. Return
TRUE if we don't care the versions of the extensions. These extensions
are added to the subset list for special purposes, with the explicit
versions or the RISCV_UNKNOWN_VERSION versions.
(riscv_parse_add_subset): If we do care the versions of the extension,
and the versions are unknown, then report errors for the non-implicit
extensions, and return directly for the implicit one.
(riscv_arch_str1): Do not output i extension after e, and the extensions
which versions are unknown.
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Handle INSN_CLASS_ZICSR
and INSN_CLASS_ZIFENCEI.
* testsuite/gas/riscv/march-imply-i.s: New testcase.
* testsuite/gas/riscv/march-imply-i2p0-01.d: New testcase. The version
of i is less than 2.1, and zi* are supported in the chosen spec, so
enable the fence.i and csr instructions, also output the implicit zi* to
the arch string.
* testsuite/gas/riscv/march-imply-i2p0-02.d: Likewise, but the zi* are
not supported in the spec 2.2. Enable the related instructions since
i's version is less than 2.1, but do not output them.
* testsuite/gas/riscv/march-imply-i2p1-01.d: New testcase. The version
of i is 2.1, so don't add it's implicit zi*, and disable the related
instructions.
* testsuite/gas/riscv/march-imply-i2p1-01.l: Likewise.
* testsuite/gas/riscv/march-imply-i2p1-02.d: Likewise, and set the zi*
explicitly, so enable the related instructions.
* testsuite/gas/riscv/march-imply-i2p0.d: Removed.
* testsuite/gas/riscv/march-imply-i2p1.d: Removed.
include/
* opcode/riscv.h: Add INSN_CLASS_ZICSR and INSN_CLASS_ZIFENCEI.
opcodes/
* riscv-opc.c (riscv_opcodes): Control fence.i and csr instructions by
zifencei and zicsr.
These two extended mnemonics are documented in the Principles of
Operations manual but currently not supported by Binutils. They
provide aliases for already supported instructions with the zero flag
being set. The flag otherwise is mingled into one of the immediate
operands what makes asm code much harder to read.
opcodes/
* s390-opc.txt: Add risbgz and risbgnz.
* s390-opc.c (U6_26): New operand type.
(INSTR_RIE_RRUUU2, MASK_RIE_RRUUU2): New instruction format and
mask.
gas/
* testsuite/gas/s390/zarch-z10.s: Add tests for risbgz.
* testsuite/gas/s390/zarch-z10.d: Add regexp for risbgz.
* testsuite/gas/s390/zarch-zEC12.s: Add tests for risbgnz.
* testsuite/gas/s390/zarch-zEC12.d: Add regexp for risbgnz.
Add extended mnemonics used in the HLASM assembler. All of them are
just aliases for instructions we already support and help when
assembling code which was written for the HLASM assembler.
The HLASM mnemonics are documented here:
https://www.ibm.com/support/knowledgecenter/SSENW6_1.6.0/com.ibm.hlasm.v1r6.asm/asmr1023.pdf
See the 'Branching with extended mnemonic codes' chapter.
objdump will still print the existing mnemonics with the exception of
relative nop branches (i.e. conditional branches with an empty
condition code mask). Now we have jnop and jgnop which will be used
by objdump when possible.
The same change have been applied to the LLVM assembler:
https://reviews.llvm.org/D92185
opcodes/
* s390-opc.txt: Add extended mnemonics.
gas/
* testsuite/gas/s390/esa-g5.s: Test new extended mnemonics.
* testsuite/gas/s390/esa-g5.d: Likewise.
* testsuite/gas/s390/esa-z900.s: Likewise.
* testsuite/gas/s390/esa-z900.d: Likewise.
* testsuite/gas/s390/zarch-z900.s: Likewise.
* testsuite/gas/s390/zarch-z900.d: Likewise.
ld/
* testsuite/ld-s390/tlsbin_64.dd: The newly added jgnop mnemonic
replaces long relative branches with empty condition code mask.
Although spec had defined and ratified p, v and n extensions,
but we don't have any related implementaitons so far, so keep
them in the supported extension table looks weird. Remove them
until we have the related implementations.
opcodes/
* riscv-opc.c (riscv_ext_version_table): Remove the p, v, n
and their versions.
The previous change
"x86: Ignore CS/DS/ES/SS segment-override prefixes in 64-bit mode"
to ignore segment override prefixes in 64-bit mode lead to dumping
branch hints as excessive prefixes:
ffffffff8109d5a0 <vmx_get_rflags>:
...
ffffffff8109d601: 3e 77 0a ds ja,pt ffffffff8109d60e <vmx_get_rflags+0x6e>
^^^^^
In this particular case, those prefixes are not excessive but are used
to provide branch hints - taken/not-taken - to the CPU.
Assign active_seg_prefix in that particular case to consume them.
gas/
2002-11-29 Borislav Petkov <bp@suse.de>
* testsuite/gas/i386/branch.d: Add new branch insns test.
* testsuite/gas/i386/branch.s: Likewise.
* testsuite/gas/i386/i386.exp: Insert the new branch test.
* testsuite/gas/i386/x86-64-branch.d: Test for branch hints insns.
* testsuite/gas/i386/x86-64-branch.s: Likewise.
* testsuite/gas/i386/ilp32/x86-64-branch.d: Likewise.
opcodes/
2020-11-28 Borislav Petkov <bp@suse.de>
* i386-dis.c (print_insn): Set active_seg_prefix for branch hint insns
to not dump branch hint prefixes 0x2E and 0x3E as unused prefixes.
Extract FLAGM (Condition flag manipulation) feature from Armv8.4-A.
Please note that FLAGM stays a Armv8.4-A feature but now can be
assigned to other architectures or CPUs.
New -march option +flagm is added to enable independently this
feature.
include * opcode/pru.h: Add LMBD (left-most bit detect) opcode index
opcodes * pru-opc.c: Add opcode description for LMBD (left-most bit detect)
gas * testsuite/gas/pru/misc.s: Add tests for lmbd (left-most bit detect)
* testsuite/gas/pru/misc.d: Add tests for lmbd (left-most bit
This patch:
+ Adds new ACCDATA_EL1 (Accelerator Data) system register, see [0].
+ Adds LS64 instruction tests.
+ Update LS64 feature test with new register.
+ Fix comment for AARCH64_OPND_Rt_LS64.
[0] https://developer.arm.com/docs/ddi0595/i/aarch64-system-registers/accdata_el1
Note: as this is register only extension we do not want to hide these
registers behind -march flag going forward (they should be enabled by
default).
Atomic 64-byte load/store instructions limit Rt register number to
values matching below condition (register <Xt> number must be even
and <= 22):
if Rt<4:3> == '11' || Rt<0> == '1' then UNDEFINED;
This patch adds check if Rt fulfills above requirement.
For more details regarding atomic 64-byte load/store instruction for
Armv8.7 please refer to Arm A64 Instruction set documentation for
Armv8-A architecture profile, see document page 157 for load
instruction, and pages 414-418 for store instructions of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
Extract PAC (Pointer Authentication) feature from Armv8.3-A.
Please note that PAC stays a Armv8.3-A feature but now can be
assigned to other architectures or CPUs.
This patch:
+ updates RAS feature system registers with new RAS 1.1 regs.
+ extends RAS/RAS 1.1 support for all architecture levels of Armv8-A.
Please note that early Armv8-A architectures do not officially support RAS
extension.
Rationale of the patch:
To ease development so that user-friendly RAS system registers operands can be
used. Certain use cases require developers to enable only more generic
architecture (e.g. -march=armv8-a) during system development. Users must use
RAS extension registers bearing in mind that system they use must support it.
The RAS (Reliability, Availability, Serviceability) extension is a
system-level extension that defines a number of system registers.
RAS 1.1 (FEAT_RASv1p1) introduces five new system registers:
ERXPFGCTL_EL1, ERXPFGCDN_EL1, ERXMISC2_EL1, ERXMISC3_EL1 and
ERXPFGF_EL1.
For details see [0].
[0] https://developer.arm.com/docs/ddi0595/i/
Armv8.7 architecture introduces the "accelerator extension", aka
load/store of 64 bytes. New atomic load/store instructions are: LD64B,
ST64B, ST64BV and ST64BV0.
This patch adds:
+ New feature +ls64 to -march command line.
+ New atomic load/store instructions associated with above feature.
For more details regarding atomic 64-byte load/store instruction for
Armv8.7 please refer to Arm A64 Instruction set documentation for
Armv8-A architecture profile, see document page 157 for load
instruction, and pages 414-418 for store instructions of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
This patch adds new to Armv8.7 WFIT instruction which take one operand:
WFIT <Xt>
Where:
<Xt> is 64-bit name of the general-purpose source register, encoded in the
"Rd" field.
For more details regarding WFIT (Wait For Interrupt with Timeout) instruction for
Armv8.7-a please refer to Arm A64 Instruction set documentation for Armv8-A
architecture profile, see document pages 570 of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
gas/ChangeLog:
2020-10-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update docs.
* testsuite/gas/aarch64/system-5.d: Update test with WFIT insn.
* testsuite/gas/aarch64/system-5.s: Update test with WFIT insn.
opcodes/ChangeLog:
2020-10-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-tbl.h (struct aarch64_opcode): New instruction WFIT.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds:
+ New feature +csre to -march command line.
+ New instruction CSR PDEC associated with CSRE feature.
Please note that CSRE system registers were already upstreamed. This patch
should finalize CSRE feature implementation.
CSRE feature adds CSR PDEC (Decrements Call stack pointer by the size of
a Call stack record) instruction. Although this instruction has operand
(PDEC) it's instruction's only operand. PDEC forces instruction field Rt
to be set to 0b1111. This results in fixed opcode of the instruction.
gas/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update docs.
* config/tc-aarch64.c (parse_csr_operand): New operand parser.
(parse_operands): Call to CSR operand parser.
* testsuite/gas/aarch64/csre_csr-invalid.d: New test.
* testsuite/gas/aarch64/csre_csr-invalid.l: New test.
* testsuite/gas/aarch64/csre_csr-invalid.s: New test.
* testsuite/gas/aarch64/csre_csr.d: New test.
* testsuite/gas/aarch64/csre_csr.s: New test.
include/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_CSRE): New -march feature.
(enum aarch64_opnd): New CSR instruction field AARCH64_OPND_CSRE_CSR.
opcodes/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-opc.c (aarch64_print_operand): CSR PDEC operand print-out.
* aarch64-tbl.h (CSRE): New CSRE feature handler.
(_CSRE_INSN): New CSRE instruction type.
(struct aarch64_opcode): New 'csre' entry for a CSRE CLI feature.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds new to Armv8.7 WFET instruction which take one operand:
WFET <Xt>
Where:
<Xt> is 64-bit name of the general-purpose source register, encoded in the
"Rd" field.
For more details regarding WFET (Wait For Event with Timeout) instruction for
Armv8.7-a please refer to Arm A64 Instruction set documentation for Armv8-A
architecture profile, see document pages 565 of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
gas/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update docs.
* testsuite/gas/aarch64/system-5.d: New test.
* testsuite/gas/aarch64/system-5.s: New test.
opcodes/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-tbl.h (struct aarch64_opcode): Add new WFET instruction encoding
and operand description.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds new variant (nXS) of DSB memory barrier instruction
available in Armv8.7-a. New nXS variant has different encoding in
comparison with pre Armv8.7-a DSB memory barrier variant thus new
instruction and new operand was added.
DSB memory nXS barrier variant specifies the limitation on the barrier
operation. Allowed values are:
DSB SYnXS|#28
DSB ISHnXS|#24
DSB NSHnXS|#20
DSB OSHnXS|#16
Please note that till now, for barriers, barrier operation was encoded in
4-bit unsigned immediate CRm field (in the range 0 to 15).
For DSB memory nXS barrier variant, barrier operation is a 5-bit unsigned
assembly instruction immediate, encoded in instruction in two bits CRm<3:2>:
CRm<3:2> #imm
00 16
01 20
10 24
11 28
This patch extends current AArch64 barrier instructions with above mapping.
Notable patch changes include:
+ New DSB memory barrier variant encoding for Armv8.7-a.
+ New operand BARRIER_DSB_NXS for above instruction in order to
distinguish between existing and new DSB instruction flavour.
+ New set of DSB nXS barrier options.
+ New instruction inserter and extractor map between instruction
immediate 5-bit value and 2-bit CRm field of the instruction itself (see
FLD_CRm_dsb_nxs).
+ Regeneration of aarch64-[asm|dis|opc]-2.c files.
+ Test cases to cover new instruction assembling and disassembling.
For more details regarding DSB memory barrier instruction and its
Armv8.7-a flavour please refer to Arm A64 Instruction set documentation
for Armv8-A architecture profile, see document pages 132-133 of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
gas/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Docs update.
* config/tc-aarch64.c (parse_operands): Add
AARCH64_OPND_BARRIER_DSB_NXS handler.
(md_begin): Add content of aarch64_barrier_dsb_nxs_options to
aarch64_barrier_opt_hsh hash.
* testsuite/gas/aarch64/system-4-invalid.d: New test.
* testsuite/gas/aarch64/system-4-invalid.l: New test.
* testsuite/gas/aarch64/system-4-invalid.s: New test.
* testsuite/gas/aarch64/system-4.d: New test.
* testsuite/gas/aarch64/system-4.s: New test.
include/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_BARRIER_DSB_NXS.
(aarch64_barrier_dsb_nxs_options): Declare DSB nXS options.
opcodes/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-asm.c (aarch64_ins_barrier_dsb_nxs): New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): New inserter
ins_barrier_dsb_nx.
* aarch64-dis.c (aarch64_ext_barrier_dsb_nxs): New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): New extractor
ext_barrier_dsb_nx.
* aarch64-opc.c (aarch64_print_operand): New options table
aarch64_barrier_dsb_nxs_options.
* aarch64-opc.h (enum aarch64_field_kind): New field name FLD_CRm_dsb_nxs.
* aarch64-tbl.h (struct aarch64_opcode): Define DSB nXS barrier
Armv8.7-a instruction.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds support for AArch64 -march=armv8.7-a command line option
in GAS.
Please note that this change ONLY extends -march= command line interface
with a new "armv8.7-a" option. Architectural changes like new instructions
will be added in following patches.
gas/ChangeLog:
2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Docs update.
* config/tc-aarch64.c (armv8.7-a): New arch.
* doc/c-aarch64.texi (-march=armv8.7-a): Update docs.
include/ChangeLog:
2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_7): New feature bitmask.
(AARCH64_ARCH_V8_7): New arch feature set.
opcodes/ChangeLog:
2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-tbl.h (ARMV8_7): New macro.
gas/
* config/tc-csky.c (get_operand_value): Add handler for
OPRND_TYPE_IMM5b_VSH and OPRND_TYPE_VREG_WITH_INDEX.
* testsuite/gas/csky/csky_vdsp.d : Fix the disassembling
for vector register.
opcodes/
* csky-dis.c (csky_output_operand): Add handler for
OPRND_TYPE_IMM5b_VSH and OPRND_TYPE_VREG_WITH_INDEX.
* csky-opc.h (OPRND_TYPE_VREG_WITH_INDEX): New enum.
(OPRND_TYPE_IMM5b_VSH): New enum.
(csky_v2_opcodes): Fix and add some instructions for VDSPV1.
Change-Id: Ia5675d7b716fe5c331e6121ad8f83061ef6454bb
This patch introduces BRBE (Branch Record Buffer Extension) system
registers.
Note: as this is register only extension we do not want to hide these
registers behind -march flag going forward (they should be enabled by
default).
gas/ChangeLog:
2020-10-08 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Docs update.
* testsuite/gas/aarch64/brbe-invalid.d: New test.
* testsuite/gas/aarch64/brbe-invalid.l: New test.
* testsuite/gas/aarch64/brbe-invalid.s: New test.
* testsuite/gas/aarch64/brbe.d: New test.
* testsuite/gas/aarch64/brbe.s: New test.
opcodes/ChangeLog:
2020-10-08 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-opc.c: Add BRBE system registers.
This patch introduces CSRE (Call Stack Recorder Extension) system
registers.
Note: as this is register only extension we do not want to hide these
registers behind -march flag going forward (they should be enabled by
default).
CSRE feature adds CSR PDEC (Decrements Call stack pointer by the size
of a Call stack record) instruction. This instruction will be added in
a following, separate patch. This change only adds CSRE system
registers.
gas/ChangeLog:
2020-10-08 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Docs update.
* testsuite/gas/aarch64/csre-invalid.d: New test.
* testsuite/gas/aarch64/csre-invalid.l: New test.
* testsuite/gas/aarch64/csre-invalid.s: New test.
* testsuite/gas/aarch64/csre.d: New test.
* testsuite/gas/aarch64/csre.s: New test.
opcodes/ChangeLog:
2020-10-08 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-opc.c: New CSRE system registers defined.
Remove the duplicated entry in opcodes/po/es.po:
binutils-gdb/opcodes/po/es.po:749: duplicate message definition...
binutils-gdb/opcodes/po/es.po:742: ...this is the location of the first definition
* po/es.po: Remove the duplicated entry.
bfd * po/es.po: Fix printf format
binutils * windmc.c: Fix printf format
gas * config/tc-arc.c: Fix printf format
opcodes * po/es.po: Fix printf format
sim * arm/armos.c: Fix printf format
* ppc/emul_netbsd.c: Fix printf format
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
Rename VexOpcode to OpcodePrefix so that OpcodePrefix can be used for
regular encoding prefix.
gas/
* config/tc-i386.c (build_vex_prefix): Replace vexopcode with
opcodeprefix.
(build_evex_prefix): Likewise.
(is_any_vex_encoding): Don't check vexopcode.
(output_insn): Handle opcodeprefix.
opcodes/
* i386-gen.c (opcode_modifiers): Replace VexOpcode with
OpcodePrefix.
* i386-opc.h (VexOpcode): Renamed to ...
(OpcodePrefix): This.
(PREFIX_NONE): New.
(PREFIX_0X66): Likewise.
(PREFIX_0XF2): Likewise.
(PREFIX_0XF3): Likewise.
* i386-opc.tbl (Prefix_0X66): New.
(Prefix_0XF2): Likewise.
(Prefix_0XF3): Likewise.
Replace VexOpcode= with OpcodePrefix=. Use Prefix_0X66 on xorpd.
Use Prefix_0XF3 on cvtdq2pd. Use Prefix_0XF2 on cvtpd2dq.
* i386-tbl.h: Regenerated.
In 64bit, assembler generates a warning for "sysret":
$ echo sysret | as --64 -o x.o -
{standard input}: Assembler messages:
{standard input}:1: Warning: no instruction mnemonic suffix given and no register operands; using default for `sysret'
Always display suffix for %LQ in 64bit to display "sysretl".
gas/
PR binutils/26704
* testsuite/gas/i386/noreg64-data16.d: Expect sysretl instead of
sysret.
* testsuite/gas/i386/noreg64.d: Likewise.
* testsuite/gas/i386/x86-64-intel64.d: Likewise.
* testsuite/gas/i386/x86-64-opcode.d: Likewise.
opcodes/
PR binutils/26704
* i386-dis.c (putop): Always display suffix for %LQ in 64bit.
The MODRM byte can be checked to display the instruction name only if the
MODRM byte needed. Clear modrm if the MODRM byte isn't needed so that
modrm field checks in putop like, modrm.mod == N with N != 0, can be done
without checking need_modrm.
gas/
PR binutils/26705
* testsuite/gas/i386/x86-64-suffix.s: Add "mov %rsp,%rbp" before
sysretq.
* testsuite/gas/i386/x86-64-suffix-intel.d: Updated.
* testsuite/gas/i386/x86-64-suffix.d: Likewise.
opcodes/
PR binutils/26705
* i386-dis.c (print_insn): Clear modrm if not needed.
(putop): Check need_modrm for modrm.mod != 3. Don't check
need_modrm for modrm.mod == 3.
gas * testsuite/gas/aarch64/ete.d: New test.
* testsuite/gas/aarch64/ete.s: New test.
opcodes * aarch64-opc.c: Add ETE system registers TRCEXTINSELR<0-3> and TRCRSR.
gas * testsuite/gas/aarch64/trbe-invalid.d: New test.
* testsuite/gas/aarch64/trbe-invalid.l: New test.
* testsuite/gas/aarch64/trbe-invalid.s: New test.
* testsuite/gas/aarch64/trbe.d: New test.
* testsuite/gas/aarch64/trbe.s: New test.
opcodes * aarch64-opc.c: Add TRBE system registers TRBIDR_EL1 , TRBBASER_EL1 ,
TRBLIMITR_EL1 , TRBMAR_EL1 , TRBPTR_EL1, TRBSR_EL1 and TRBTRG_EL1.
There are 11 MOD_VEX_0F38* inserted in MOD_0F38* group,
which should be placed in MOD_VEX_0F38* group.
opcode/
PR 26654
*i386-dis.c (enum): Put MOD_VEX_0F38* together.
This commit:
commit afdcafe891
Date: Thu Sep 17 14:30:28 2020 +0800
CSKY: Add objdump option -M abi-names.
cases the build of GDB (configured with --enabled-targets=all) to fail
with this error:
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src/opcodes -I. -I../../src/opcodes -I../bfd -I../../src/opcodes/../include -I../../src/opcodes/../bfd -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Wstack-usage=262144 -Werror -O0 -g3 -D_GLIBCXX_DEBUG=1 -MT csky-dis.lo -MD -MP -MF .deps/csky-dis.Tpo -c ../../src/opcodes/csky-dis.c -o csky-dis.o
../../src/opcodes/csky-dis.c: In function 'csky_output_operand':
../../src/opcodes/csky-dis.c:849:7: error: this 'if' clause does not guard... [-Werror=misleading-indentation]
849 | if (IS_CSKY_V1 (mach_flag))
| ^~
../../src/opcodes/csky-dis.c:851:2: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if'
851 | strcat (str, buf);
| ^~~~~~
this commit adds { ... } around the if body to resolve this issue.
opcodes/ChangeLog:
* csky-dis.c (csky_output_operand): Enclose body of if in curly
braces.
Add option parser for disassembler, and refine the codes of
parse register operand and disassemble register operand.
While strengthen the operands legality check of some instructions.
Co-Authored-By: Lifang Xia <lifang_xia@c-sky.com>
gas/
* config/tc-csky.c (parse_type_ctrlreg): Use function
csky_get_control_regno to operand.
(csky_get_reg_val): Likewise.
(is_reg_sp_with_bracket): Use function csky_get_reg_val
to parse operand.
(is_reg_sp): Refine.
(is_oimm_within_range): Fix, report error when operand
is not constant.
(parse_type_cpreg): Refine.
(parse_type_cpcreg): Refine.
(get_operand_value): Add handle of OPRND_TYPE_IMM5b_LS.
(md_assemble): Fix no error reporting somtimes when
operands number are not fit.
(csky_addc64): Refine.
(csky_subc64): Refine.
(csky_or64): Refine.
(v1_work_fpu_fo): Refine.
(v1_work_fpu_read): Refine.
(v1_work_fpu_writed): Refine.
(v1_work_fpu_readd): Refine.
(v2_work_addc): New function, strengthen the operands legality
check of addc.
* gas/testsuite/gas/csky/all.d : Use register number format when
disassemble register name by default.
* gas/testsuite/gas/csky/cskyv2_all.d : Likewise.
* gas/testsuite/gas/csky/trust.d: Likewise.
* gas/testsuite/gas/csky/cskyv2_ck860.d : Fix.
* gas/testsuite/gas/csky/trust.s : Fix.
opcodes/
* csky-dis.c (using_abi): New.
(parse_csky_dis_options): New function.
(get_gr_name): New function.
(get_cr_name): New function.
(csky_output_operand): Use get_gr_name and get_cr_name to
disassemble and add handle of OPRND_TYPE_IMM5b_LS.
(print_insn_csky): Parse disassembler options.
* opcodes/csky-opc.h (OPRND_TYPE_IMM5b_LS): New enum.
(GENARAL_REG_BANK): Define.
(REG_SUPPORT_ALL): Define.
(REG_SUPPORT_ALL): New.
(ASH): Define.
(REG_SUPPORT_A): Define.
(REG_SUPPORT_B): Define.
(REG_SUPPORT_C): Define.
(REG_SUPPORT_D): Define.
(REG_SUPPORT_E): Define.
(csky_abiv1_general_regs): New.
(csky_abiv1_control_regs): New.
(csky_abiv2_general_regs): New.
(csky_abiv2_control_regs): New.
(get_register_name): New function.
(get_register_number): New function.
(csky_get_general_reg_name): New function.
(csky_get_general_regno): New function.
(csky_get_control_reg_name): New function.
(csky_get_control_regno): New function.
(csky_v2_opcodes): Prefer two oprerans format for bclri and
bseti, strengthen the operands legality check of addc, zext
and sext.
Add gas and opcodes support for two xBPF-exclusive ALU operations:
SDIV (signed division) and SMOD (signed modulo), and add tests for
them in gas.
cpu/
* bpf.cpu (insn-op-code-alu): Add SDIV and SMOD.
(define-alu-insn-bin, daib): Take ISAs as an argument.
(define-alu-instructions): Update calls to daib pmacro with
ISAs; add sdiv and smod.
gas/
* testsuite/gas/bpf/alu-xbpf.d: New file.
* testsuite/gas/bpf/alu-xbpf.s: Likewise.
* testsuite/gas/bpf/alu32-xbpf.d: Likewise.
* testsuite/gas/bpf/alu32-xbpf.d: Likewise.
* testuiste/gas/bpf/bpf.exp: Run new tests.
opcodes/
* bpf-desc.c: Regenerate.
* bpf-desc.h: Likewise.
* bpf-opc.c: Likewise.
* bpf-opc.h: Likewise.
The disassembler function should return a valid disassembler function
even when there is no BFD present. This is implied (I believe) by the
comment in dis-asm.h which says the BFD may be NULL. Further, it
makes sense when considering that the disassembler is used in GDB, and
GDB may connect to a target and perform debugging even without a BFD
being supplied.
This commit makes the csky_get_disassembler function return the
default disassembler configuration when no bfd is supplied, this is
the same default configuration as is used when a BFD is supplied, but
the BFD has no attributes section.
Before the change configuring GDB with --enable-targets=all and
running the tests gdb.base/all-architectures-2.exp results in many
errors, but after this change there are no failures.
opcodes/ChangeLog:
* csky-dis.c (csky_get_disassembler): Don't return NULL when there
is no BFD.
* ppc-dis.c (ppc_symbol_is_valid): New function. Returns false
for hidden, local, no-type symbols.
(disassemble_init_powerpc): Point the symbol_is_valid field in the
info structure at the new function.
Add arches CK804, CK805 and CK800. CK800 is an special arch which
support all instructions for CSKYV2. Refine the cpu tables to
simplify adding a new cpu.
Co-Authored-By: Lifang Xia <lifang_xia@c-sky.com>
gas/
* config/tc-csky.c (struct csky_cpu_info): Add new members
isa_flag, features and ver.
(struct csky_cpu_feature): New.
(struct csky_cpu_version): New.
(CSKY_FEATURE_MAX): Define.
(CSKY_CPU_REVERISON_MAX): Define.
(FEATURE_DSP_EXT, FEATURE_DSP, FEATURE_MMU, FEATURE_VDSP,
FEATURE_FLOAT, FEATURE_TRUST, FEATURE_JAVA, FEATURE_SHIELD):
Define, each standard one collection of instructions.
(CSKY_FEATURES_DEF_NULL, CSKY_FEATURES_DEF_e,
CSKY_FEATURES_DEF_t, CSKY_FEATURES_DEF_f, CSKY_FEATURES_DEF_v,
CSKY_FEATURES_DEF_ef, CSKY_FEATURES_DEF_jt,
CSKY_FEATURES_DEF_efht, CSKY_FEATURES_DEF_efv,
CSKY_FEATURES_DEF_eft, CSKY_FEATURES_DEF_d,
CSKY_FEATURES_DEF_df, CSKY_FEATURES_DEF_ft,
CSKY_FEATURES_DEF_tv, CSKY_FEATURES_DEF_fv,
CSKY_FEATURES_DEF_dft, CSKY_FEATURES_DEF_dfv,
CSKY_FEATURES_DEF_ftv, CSKY_FEATURES_DEF_eftv): Define,
the features combination used by cpu.
(CSKY_CPU_REVERISON_r0p0, CSKY_CPU_REVERISON_r1p0,
CSKY_CPU_REVERISON_r2p0, CSKY_CPU_REVERISON_r3p0,
CSKY_CPU_REVERISON_RESERVED, CSKY_CPU_REVERISON_R3):
Define, version information used by cpu.
(csky_cpus): Refine, and add CK804, CK805 and CK800.
(parse_cpu): Refine.
(parse_arch): Refine.
(md_show_usage): Refine.
(md_begin): Refine.
include/
* opcode/csky.h (CSKY_ARCH_804): Define.
(CSKY_ARCH_805): Define.
(CSKY_ARCH_800): Define.
incldue * opcode/csky.h (CSKY_ISA_FLOAT_7E60): Use a long long type for
this value.
opcodes * csky-dis.c (csky_output_operand): Coerce the immediate values to
long before printing.
This patch adds support for the system registers introduced in Armv8-R
AArch64.
gas/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* config/tc-aarch64.c (parse_sys_reg): Also pass sysreg name to
validation function.
(parse_sys_ins_reg): Likewise.
(print_operands): Pass CPU features to aarch64_print_operand().
* testsuite/gas/aarch64/v8-r-bad-sysregs.d: New test.
* testsuite/gas/aarch64/v8-r-bad-sysregs.l: Error output.
* testsuite/gas/aarch64/v8-r-bad-sysregs.s: Input.
* testsuite/gas/aarch64/v8-r-sysregs-need-arch.d: New test.
* testsuite/gas/aarch64/v8-r-sysregs-need-arch.l: Error output.
* testsuite/gas/aarch64/v8-r-sysregs.d: New test.
* testsuite/gas/aarch64/v8-r-sysregs.s: Input for previous two tests.
include/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* opcode/aarch64.h (aarch64_sys_ins_reg_supported_p): Also take
system register name in order to simplify validation for v8-R.
(aarch64_print_operand): Also take CPU feature set, as disassembly for
system registers now depends on arch variant.
opcodes/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* aarch64-dis.c (print_operands): Pass CPU features to
aarch64_print_operand().
* aarch64-opc.c (aarch64_print_operand): Use CPU features to determine
preferred disassembly of system registers.
(SR_RNG): Refactor to use new SR_FEAT2 macro.
(SR_FEAT2): New.
(SR_V8_1_A): New.
(SR_V8_4_A): New.
(SR_V8_A): New.
(SR_V8_R): New.
(SR_EXPAND_ELx): New.
(SR_EXPAND_EL12): New.
(aarch64_sys_regs): Specify which registers are only on
A-profile, add R-profile system registers.
(ENC_BARLAR): New.
(PRBARn_ELx): New.
(PRLARn_ELx): New.
(aarch64_sys_ins_reg_supported_p): Reject EL3 registers for
Armv8-R AArch64.
This patch adds the basic infrastructure needed to support Armv8-R in
AArch64 binutils: new command-line flags, new feature bits, a new BFD
architecture, and support for differentiating between architecture
variants in the disassembler.
The new command-line options added by this patch are -march=armv8-r in
GAS and -m aarch64:armv8-r in objdump.
The disassembler support is necessary since Armv8-R AArch64 introduces a
system register (VSCTLR_EL2) which shares an encoding with a different
system register (TTBR0_EL2) in Armv8-A. This also allows us to use the
correct preferred disassembly for the new DFB alias introduced in
Armv8-R.
bfd/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* archures.c (bfd_mach_aarch64_8R): New.
* bfd-in2.h: Regenerate.
* cpu-aarch64.c (bfd_aarch64_arch_v8_r): New.
(bfd_aarch64_arch_ilp32): Update tail pointer.
gas/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* config/tc-aarch64.c (aarch64_archs): Add armv8-r.
* doc/c-aarch64.texi: Document -march=armv8-r.
include/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_A): New.
(AARCH64_FEATURE_V8_R): New.
(AARCH64_ARCH_V8): Include new A-profile feature bit.
(AARCH64_ARCH_V8_R): New.
opcodes/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* aarch64-dis.c (arch_variant): New.
(determine_disassembling_preference): Disassemble according to
arch variant.
(select_aarch64_variant): New.
(print_insn_aarch64): Set feature set.
i386-dis.c:12207 left shift of 128 by 24 places cannot be represented in type 'long int'
i386-dis.c:12220 left shift of 128 by 24 places cannot be represented in type 'long int'
i386-dis.c:12222 left shift of 1 by 31 places cannot be represented in type 'long int'
i386-dis.c:12222 signed integer overflow: 162254319 - -2147483648 cannot be represented in type 'long int'
* i386-dis.c (OP_E_memory): Don't cast to signed type when
negating.
(get32, get32s): Use unsigned types in shift expressions.
bfin-dis.c:160 shift exponent 32 is too large for 32-bit type 'long unsigned int'
bpf-ibld.c:196 left shift of 1 by 31 places cannot be represented in type 'long int'
bpf-ibld.c:196 negation of -2147483648 cannot be represented in type 'long int'; cast to an unsigned type to negate this
itself
bpf-ibld.c:197 left shift of 1 by 31 places cannot be represented in type 'long int'
bpf-ibld.c:197 signed integer overflow: -2147483648 - 1 cannot be represented in type 'long int'
bpf-ibld.c:501 left shift of 1 by 31 places cannot be represented in type 'long int'
* cgen-ibld.in (insert_normal, extract_normal): Use 1UL in left shift.
* bpf-ibld.c: Regenerate.
* epiphany-ibld.c: Regenerate.
* fr30-ibld.c: Regenerate.
* frv-ibld.c: Regenerate.
* ip2k-ibld.c: Regenerate.
* iq2000-ibld.c: Regenerate.
* lm32-ibld.c: Regenerate.
* m32c-ibld.c: Regenerate.
* m32r-ibld.c: Regenerate.
* mep-ibld.c: Regenerate.
* mt-ibld.c: Regenerate.
* or1k-ibld.c: Regenerate.
* xc16x-ibld.c: Regenerate.
* xstormy16-ibld.c: Regenerate.
Move divul and divsl to CSKYV2_ISA_3E3R3 instruction set, which is
enabled by ck803r3, and it's still a part of enhance DSP instruction
set.
gas/
* config/tc-csky.c (csky_cpus): Add ck803r3.
(CSKY_ISA_803R3): Define.
(CSKY_ISA_803R2): Refine, use CSKY_ISA_803R1.
include/
* opcode/csky.h (CSKYV2_ISA_3E3R3): Define.
opcodes/
* csky-opc.h (csky_v2_opcodes): Move divul and divsl
to CSKYV2_ISA_3E3R3 instruction set.
cpu/
* mep-core.cpu (f-8s8a2, f-12s4a2, f-17s16a2): Multiply signed
value by two rather than shifting left.
(f-24s5a2n): Similarly multiply signed f-24s5a2n-hi to extract.
opcodes/
* mep-ibld.c: Regenerate.
When looking at the UB errors, I noticed that cbitb_test.d disassembly
wasn't reproducing the input assembly. That turned out to be an error
in make_argument case arg_cr. This fixes that and makes some general
tidies.
opcodes/
* cr16-dis.c: Formatting.
(parameter): Delete struct typedef. Use dwordU instead
throughout file.
(make_argument <arg_idxr>): Simplify detection of cbitb, sbitb
and tbitb.
(make_argument <arg_cr>): Extract 20-bit field not 16-bit.
gas/
* testsuite/gas/cr16/cbitb_test.d: Update expected output.
* testsuite/gas/cr16/cbitw_test.d: Likewise.
* testsuite/gas/cr16/sbitb_test.d: Likewise.
* testsuite/gas/cr16/sbitw_test.d: Likewise.
* testsuite/gas/cr16/storb_test.d: Likewise.
* testsuite/gas/cr16/storw_test.d: Likewise.
* testsuite/gas/cr16/tbitb_test.d: Likewise.
* testsuite/gas/cr16/tbitw_test.d: Likewise.
