libopcodes currently reports out-of-range registers as a general
AARCH64_OPDE_OTHER_ERROR. However, this means that each register
range needs its own hard-coded string, which is a bit cumbersome
if the range is determined programmatically. This patch therefore
adds a dedicated error type for out-of-range errors.
In SME, the vector select register had to be in the range
w12-w15, so it made sense to enforce that during parsing.
However, SME2 adds instructions for which the range is
w8-w11 instead.
This patch therefore moves the range check from the parsing
stage to the constraint-checking stage.
Also, the previous error used a capitalised range W12-W15,
whereas other register range errors used lowercase ranges
like p0-p7. A quick internal poll showed a preference for
the lowercase form, so the patch uses that.
The patch uses "selection register" rather than "vector
select register" so that the terminology extends more
naturally to PSEL.
This patch moves the range checks on ZA vector select offsets from
gas to libopcodes. Doing the checks there means that the error
messages contain the expected range. It also fits in better
with the error severity scheme, which becomes important later.
(This is because out-of-range indices are treated as more severe than
syntax errors, on the basis that parsing must have succeeded if we get
to the point of checking the completed opcode.)
The patch also adds a new check_za_access function for checking
ZA accesses. That's a bit over the top for one offset check, but the
function becomes more complex with later patches.
sme-9-illegal.s checked for an invalid .q suffix using:
psel p1, p15, p3.q[w15]
but this is doubly invalid because it misses the immediate part
of the index. The patch keeps that test but adds another with
a zero index, so that .q is the only thing wrong.
The aarch64-tbl.h change includes neatening up the backslash
positions.
A later patch moves the range checking for ZA vector select
offsets from gas to libopcodes. That in turn requires the
immediate field to be big enough to support all parsed values.
This shouldn't be a particularly size-sensitive structure,
so there should be no memory problems with doing this.
za_tile_vector is also used for indexing ZA as a whole, rather than
just for indexing tiles. The former is more common than the latter
in SME2, so this patch generalises the name to "indexed_za".
The patch also names the associated structure, so that later patches
can reuse it during parsing.
In the register-index forms of PRFM, the unallocated prefetch opcodes
24-31 have been reused for the encoding of the new RPRFM instruction.
The PRFM opcode space is now capped at 23 for these forms. The other
forms of PRFM are unaffected.
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
Current F_STRICT qualifier checking is enforced after the fact
rather than as part of the match. This makes it impossible to
have, e.g.:
QLF2(S_D, S_D)
QLF2(S_D, NIL)
in the same list.
opcodes/
* aarch64-opc.c (aarch64_find_best_match): Handle F_STRICT here
rather than...
(match_operands_qualifier): ...here.
This commit enables disassembler styling for AArch64. After this
commit it is possible to have objdump style AArch64 disassembler
output (using --disassembler-color option). Once the required GDB
patches are merged, GDB will also style the disassembler output.
The changes to support styling are mostly split between two files
opcodes/aarch64-dis.c and opcodes/aarch64-opc.c.
The entry point for the AArch64 disassembler can be found in
aarch64-dis.c, this file handles printing the instruction mnemonics,
and assembler directives (e.g. '.byte', '.word', etc). Some operands,
mostly relating to assembler directives are also printed from this
file. This commit changes all of this to pass through suitable
styling information.
However, for most "normal" instructions, the instruction operands are
printed using a two step process. From aarch64-dis.c, in the
print_operands function, the function aarch64_print_operand is called,
this function is in aarch64-opc.c, and converts an instruction operand
into a string. Then, back in print_operands (aarch64-dis.c), the
operand string is printed.
Unfortunately, the string returned by aarch64_print_operand can be
quite complex, it will include syntax elements, like '[' and ']', in
addition to register names and immediate values. In some cases, a
single operand will expand into what will appear (to the user) as
multiple operands separated with a ','.
This makes the task of styling more complex, all these different
components need to by styled differently, so we need to get the
styling information out of aarch64_print_operand in some way.
The solution that I propose here is similar to the solution that I
used for the i386 disassembler.
Currently, aarch64_print_operand uses snprintf to write the operand
text into a buffer provided by the caller.
What I propose is that we pass an extra argument to the
aarch64_print_operand function, this argument will be a structure, the
structure contains a callback function and some state.
When aarch64_print_operand needs to format part of its output this can
be done by using the callback function within the new structure, this
callback returns a string with special embedded markers that indicate
which mode should be used for each piece of text. Back in
aarch64-dis.c we can spot these special style markers and use this to
split the disassembler output up and apply the correct style to each
piece.
To make aarch64-opc.c clearer a series of new static functions have
been added, e.g. 'style_reg', 'style_imm', etc. Each of these
functions formats a piece of text in a different style, 'register' and
'immediate' in this case.
Here's an example taken from aarch64-opc.c of the new functions in
use:
snprintf (buf, size, "[%s, %s]!",
style_reg (styler, base),
style_imm (styler, "#%d", opnd->addr.offset.imm));
The aarch64_print_operand function is also called from the assembler
to aid in printing diagnostic messages. Right now I have no plans to
add styling to the assembler output, and so, the callback function
used in the assembler ignores the styling information and just returns
an plain string.
I've used the source files in gas/testsuite/gas/aarch64/ for testing,
and have manually gone through and checked that the styling looks
reasonable, however, I'm not an AArch64 expert, so it is possible that
the odd piece is styled incorrectly. Please point out any mistakes
I've made.
With objdump disassembler color turned off, there should be no change
in the output after this commit.
The function aarch64_print_operand (aarch64-opc.c) is responsible for
converting an instruction operand into the textual representation of
that operand.
In some cases, a comment is included in the operand representation,
though this (currently) only happens for the last operand of the
instruction.
In a future commit I would like to enable the new libopcodes styling
for AArch64, this will allow objdump and GDB[1] to syntax highlight
the disassembler output, however, having operands and comments
combined in a single string like this makes such styling harder.
In this commit, I propose to extend aarch64_print_operand to take a
second buffer. Any comments for the instruction are written into this
extra buffer. The two callers of aarch64_print_operand are then
updated to pass an extra buffer, and print any resulting comment.
In this commit no styling is added, that will come later. However, I
have adjusted the output slightly. Before this commit some comments
would be separated from the instruction operands with a tab character,
while in other cases the comment was separated with two single spaces.
After this commit I use a single tab character in all cases. This
means a few test cases needed updated. If people would prefer me to
move everyone to use the two spaces, then just let me know. Or maybe
there was a good reason why we used a mix of styles, I could probably
figure out a way to maintain the old output exactly if that is
critical.
Other than that, there should be no user visible changes after this
commit.
[1] GDB patches have not been merged yet, but have been posted to the
GDB mailing list:
https://sourceware.org/pipermail/gdb-patches/2022-June/190142.html
FEAT_RNG is an optional Armv8.5-A extension, but it can be backported
to earlier architectures as well. GAS previously made the RNG registers
conditional on having both armv8.5-a and +rng, but only +rng should be
required.
This seems to be the only feature that was handled like this.
opcodes/
* aarch64-opc.c (SR_RNG): Don't require V8_5.
gas/
* testsuite/gas/aarch64/rng-1.s, testsuite/gas/aarch64/rng-1.d: New
test.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
AARCH64_OPDE_EXPECTED_A_AFTER_B and AARCH64_OPDE_A_SHOULD_FOLLOW_B
are not paired with an error string, but we had an assert that the
error was nonnull. Previously this assert was testing uninitialised
memory and so could pass or fail arbitrarily.
opcodes/
* aarch64-opc.c (verify_mops_pme_sequence): Initialize the error
field to null for AARCH64_OPDE_EXPECTED_A_AFTER_B and
AARCH64_OPDE_A_SHOULD_FOLLOW_B.
* aarch64-dis.c (print_verifier_notes): Move assert.
The MOPS instructions should be used as a triple, such as:
cpyfp [x0]!, [x1]!, x2!
cpyfm [x0]!, [x1]!, x2!
cpyfe [x0]!, [x1]!, x2!
The registers should also be the same for each writeback operand.
This patch adds a warning for code that doesn't follow this rule,
along similar lines to the warning that we already emit for
invalid uses of MOVPRFX.
include/
* opcode/aarch64.h (C_SCAN_MOPS_P, C_SCAN_MOPS_M, C_SCAN_MOPS_E)
(C_SCAN_MOPS_PME): New macros.
(AARCH64_OPDE_A_SHOULD_FOLLOW_B): New aarch64_operand_error_kind.
(AARCH64_OPDE_EXPECTED_A_AFTER_B): Likewise.
(aarch64_operand_error): Make each data value a union between
an int and a string.
opcodes/
* aarch64-tbl.h (MOPS_CPY_OP1_OP2_INSN): Add scan flags.
(MOPS_SET_OP1_OP2_INSN): Likewise.
* aarch64-opc.c (set_out_of_range_error): Update after change to
aarch64_operand_error.
(set_unaligned_error, set_reg_list_error): Likewise.
(init_insn_sequence): Use a 3-instruction sequence for
MOPS P instructions.
(verify_mops_pme_sequence): New function.
(verify_constraints): Call it.
* aarch64-dis.c (print_verifier_notes): Handle
AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B.
gas/
* config/tc-aarch64.c (operand_mismatch_kind_names): Add entries
for AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B.
(operand_error_higher_severity_p): Check that
AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B
come between AARCH64_OPDE_RECOVERABLE and AARCH64_OPDE_SYNTAX_ERROR;
their relative order is not significant.
(record_operand_error_with_data): Update after change to
aarch64_operand_error.
(output_operand_error_record): Likewise. Handle
AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B.
* testsuite/gas/aarch64/mops_invalid_2.s,
testsuite/gas/aarch64/mops_invalid_2.d,
testsuite/gas/aarch64/mops_invalid_2.l: New test.
This patch adds support for FEAT_MOPS, an Armv8.8-A extension
that provides memcpy and memset acceleration instructions.
I took the perhaps controversial decision to generate the individual
instruction forms using macros rather than list them out individually.
This becomes useful with a follow-on patch to check that code follows
the correct P/M/E sequence.
[https://developer.arm.com/documentation/ddi0596/2021-09/Base-Instructions?lang=en]
include/
* opcode/aarch64.h (AARCH64_FEATURE_MOPS): New macro.
(AARCH64_ARCH_V8_8): Make armv8.8-a imply AARCH64_FEATURE_MOPS.
(AARCH64_OPND_MOPS_ADDR_Rd): New aarch64_opnd.
(AARCH64_OPND_MOPS_ADDR_Rs): Likewise.
(AARCH64_OPND_MOPS_WB_Rn): Likewise.
opcodes/
* aarch64-asm.h (ins_x0_to_x30): New inserter.
* aarch64-asm.c (aarch64_ins_x0_to_x30): New function.
* aarch64-dis.h (ext_x0_to_x30): New extractor.
* aarch64-dis.c (aarch64_ext_x0_to_x30): New function.
* aarch64-tbl.h (aarch64_feature_mops): New feature set.
(aarch64_feature_mops_memtag): Likewise.
(MOPS, MOPS_MEMTAG, MOPS_INSN, MOPS_MEMTAG_INSN)
(MOPS_CPY_OP1_OP2_PME_INSN, MOPS_CPY_OP1_OP2_INSN, MOPS_CPY_OP1_INSN)
(MOPS_CPY_INSN, MOPS_SET_OP1_OP2_PME_INSN, MOPS_SET_OP1_OP2_INSN)
(MOPS_SET_INSN): New macros.
(aarch64_opcode_table): Add MOPS instructions.
(aarch64_opcode_table): Add entries for AARCH64_OPND_MOPS_ADDR_Rd,
AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn.
* aarch64-opc.c (aarch64_print_operand): Handle
AARCH64_OPND_MOPS_ADDR_Rd, AARCH64_OPND_MOPS_ADDR_Rs and
AARCH64_OPND_MOPS_WB_Rn.
(verify_three_different_regs): New function.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
gas/
* doc/c-aarch64.texi: Document +mops.
* config/tc-aarch64.c (parse_x0_to_x30): New function.
(parse_operands): Handle AARCH64_OPND_MOPS_ADDR_Rd,
AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn.
(aarch64_features): Add "mops".
* testsuite/gas/aarch64/mops.s, testsuite/gas/aarch64/mops.d: New test.
* testsuite/gas/aarch64/mops_invalid.s,
* testsuite/gas/aarch64/mops_invalid.d,
* testsuite/gas/aarch64/mops_invalid.l: Likewise.
Armv8.8-A defines a read-only system register called id_aa64isar2_el1.
The register was previously RES0 and should therefore be accepted
at all architecture levels.
[https://developer.arm.com/documentation/ddi0595/2021-09/AArch64-Registers/ID-AA64ISAR2-EL1--AArch64-Instruction-Set-Attribute-Register-2?lang=en]
opcodes/
* aarch64-opc.c (aarch64_sys_regs): Add id_aa64isar2_el1.
gas/
* testsuite/gas/aarch64/sysreg-diagnostic.s: Test writes to
id_aa64isar2_el1.
* testsuite/gas/aarch64/sysreg-diagnostic.d: Update accordingly.
* testsuite/gas/aarch64/sysreg-diagnostic.l: Likewise.
* testsuite/gas/aarch64/sysreg.s: Test reads from
id_aa64isar2_el1.
* testsuite/gas/aarch64/sysreg.d: Update accordingly.
libopcodes has some code to check constraints across sequences
of consecutive instructions. It was added to support MOVPRFX
sequences but is going to be useful for the Armv8.8-A MOPS
feature as well.
Currently the structure has one field to record the instruction
that started a sequence and another to record the remaining
instructions in the sequence. It's more convenient for the
MOPS code if we put the instructions into a single array instead.
No functional change intended.
include/
* opcode/aarch64.h (aarch64_instr_sequence): Replace num_insns
and current_insns with num_added_insns and num_allocated_insns.
opcodes/
* aarch64-opc.c (add_insn_to_sequence): New function.
(init_insn_sequence): Update for new aarch64_instr_sequence layout.
Add the first instruction to the inst array.
(verify_constraints): Update for new aarch64_instr_sequence layout.
Don't add the last instruction to the array.
The immediate form of MSR has a 4-bit immediate field (in CRm).
However, many forms of MSR require a smaller immediate. These cases
are identified by value in operand_general_constraint_met_p,
but they're now the common case rather than the exception.
This patch therefore adds the maximum value to the sys_reg
description and gets the range from there. It also enforces
the minimum of 0, which avoids a situation in which:
msr dit, #2
would give the expected:
Error: immediate value out of range 0 to 1
whereas:
msr dit, #-1
would give:
Error: immediate value out of range 0 to 15
(from the later UIMM4 checking).
Also:
- we were reporting the first error above against the wrong operand
- TCO takes a single-bit immediate, but we previously allowed
all 16 values.
[https://developer.arm.com/documentation/ddi0596/2021-09/Base-Instructions/MSR--immediate---Move-immediate-value-to-Special-Register-?lang=en]
opcodes/
* aarch64-opc.h (F_REG_MAX_VALUE, F_GET_REG_MAX_VALUE): New macros.
* aarch64-opc.c (operand_general_constraint_met_p): Read the
maximum MSR immediate value from aarch64_pstatefields.
(aarch64_pstatefields): Add the maximum immediate value
for each register.
gas/
* testsuite/gas/aarch64/sysreg-4.s: Use an immediate value of 1
rather than 8 for the TCO test.
* testsuite/gas/aarch64/sysreg-4.d: Update accordingly.
* testsuite/gas/aarch64/armv8_2-a-illegal.l: Fix operand number
in MSR immediate error messages.
* testsuite/gas/aarch64/diagnostic.l: Likewise.
* testsuite/gas/aarch64/pan-illegal.l: Likewise.
* testsuite/gas/aarch64/ssbs-illegal1.l: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4b.s,
* testsuite/gas/aarch64/illegal-sysreg-4b.d,
* testsuite/gas/aarch64/illegal-sysreg-4b.l: New test.
This patch adds support for various system registers, up to Armv8.7-A.
This includes all the registers that were mentioned in the PR and that
hadn't become supported since.
opcodes/
PR aarch64/27145
* aarch64-opc.c (SR_V8_4): Remove duplicate definition.
(SR_V8_6, SR_V8_7, SR_GIC, SR_AMU): New macros.
(aarch64_sys_regs): Add missing entries (up to Armv8.7-A).
gas/
PR aarch64/27145
* testsuite/gas/aarch64/sysreg-8.s,
* testsuite/gas/aarch64/sysreg-8.d,
* testsuite/gas/aarch64/illegal-sysreg-8.s,
* testsuite/gas/aarch64/illegal-sysreg-8.d,
* testsuite/gas/aarch64/illegal-sysreg-8.l,
* testsuite/gas/aarch64/illegal-sysreg-8b.s,
* testsuite/gas/aarch64/illegal-sysreg-8b.d,
* testsuite/gas/aarch64/illegal-sysreg-8b.l: New tests.
* testsuite/gas/aarch64/sysreg.s: Change system register numbers
to ones that are still unallocated.
* testsuite/gas/aarch64/sysreg.d: Update accordingly.
We have a +lor feature flag for the Limited Ordering Regions
extension, but the associated registers didn't use it.
opcodes/
* aarch64-opc.c (SR_LOR): New macro.
(aarch64_sys_regs): Use it for lorc_el1, lorea_el1, lorn_el1 and
lorsa_el1.
gas/
* testsuite/gas/aarch64/sysreg-7.s: Enable +lor.
* testsuite/gas/aarch64/illegal-sysreg-7.s: Test for LOR registers
without +lor.
* testsuite/gas/aarch64/illegal-sysreg-7.d: Update accordingly.
* testsuite/gas/aarch64/illegal-sysreg-7.l: Likewise.
ZIDR_EL1 was part of an early version of SVE, but didn't make
it to the final release.
opcodes/
* aarch64-opc.c (aarch64_sys_regs): Remove zidr_el1 entry.
gas/
* testsuite/gas/aarch64/sve-sysreg.s: Remove zidr_el1.
* testsuite/gas/aarch64/sve-sysreg.d: Update accordingly.
* testsuite/gas/aarch64/sve-sysreg-invalid.l: Likewise.
MFAR_EL3 is a read/write register, but was incorrectly marked as
read-only
[https://developer.arm.com/documentation/ddi0601/2021-09/AArch64-Registers/MFAR-EL3--PA-Fault-Address-Register?lang=en]
opcodes/
* aarch64-opc.c (aarch64_sys_regs): Mark mfar_el3 as read-write.
gas/
* testsuite/gas/aarch64/rme.s: Test writing to mfar_el3.
* testsuite/gas/aarch64/rme.d: Update accordingly.
* testsuite/gas/aarch64/rme-invalid.s: Delete.
* testsuite/gas/aarch64/rme-invalid.l: Likewise.
* testsuite/gas/aarch64/rme-invalid.d: Likewise.
We were incorrectly allowing writes to PMSIDR_EL1, which is
a read-only register.
[https://developer.arm.com/documentation/ddi0595/2021-09/AArch64-Registers/PMSIDR-EL1--Sampling-Profiling-ID-Register?lang=en]
opcodes/
* aarch64-opc.c (aarch64_sys_regs): Make pmsidr_el1 as F_REG_READ.
gas/
* testsuite/gas/aarch64/msr.s: Remove write to pmsidr_el1.
* testsuite/gas/aarch64/msr.d: Update accordingly.
* testsuite/gas/aarch64/illegal-sysreg-2.s,
* testsuite/gas/aarch64/illegal-sysreg-2.d,
* testsuite/gas/aarch64/illegal-sysreg-2.l: New test.
There is a lot of overlap between the ETM and ETE system registers,
so some registers were listed twice.
Already tested by etm.[sd] and ete.[sd].
opcodes/
* aarch64-opc.c (aarch64_sys_regs): Combine ETE and ETM blocks
and remove redundant entries.
gas/
* testsuite/gas/aarch64/etm.s: Remove duplicated test.
* testsuite/gas/aarch64/etm.d: Update accordingly.
This patch is adding new SVE2 instructions added to support SME extension.
The following SVE2 instructions are added by the SME architecture:
* PSEL,
* REVD, SCLAMP and UCLAMP.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_pred_reg_with_index):
New parser.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-9-illegal.d: New test.
* testsuite/gas/aarch64/sme-9-illegal.l: New test.
* testsuite/gas/aarch64/sme-9-illegal.s: New test.
* testsuite/gas/aarch64/sme-9.d: New test.
* testsuite/gas/aarch64/sme-9.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_PnT_Wm_imm.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_pred_reg_with_index):
New inserter.
* aarch64-dis.c (aarch64_ext_sme_pred_reg_with_index):
New extractor.
* aarch64-opc.c (aarch64_print_operand): Printout of
OPND_SME_PnT_Wm_imm.
* aarch64-opc.h (enum aarch64_field_kind): New bitfields
FLD_SME_Rm, FLD_SME_i1, FLD_SME_tszh, FLD_SME_tszl.
* aarch64-tbl.h (OP_SVE_NN_BHSD): New qualifier.
(OP_SVE_QMQ): New qualifier.
(struct aarch64_opcode): New instructions PSEL, REVD,
SCLAMP and UCLAMP.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding miscellaneous SME related system registers.
gas/ChangeLog:
* testsuite/gas/aarch64/sme-sysreg.d: New test.
* testsuite/gas/aarch64/sme-sysreg.s: New test.
* testsuite/gas/aarch64/sme-sysreg-illegal.d: New test.
* testsuite/gas/aarch64/sme-sysreg-illegal.l: New test.
* testsuite/gas/aarch64/sme-sysreg-illegal.s: New test.
opcodes/ChangeLog:
* aarch64-opc.c: New system registers id_aa64smfr0_el1,
smcr_el1, smcr_el12, smcr_el2, smcr_el3, smpri_el1,
smprimap_el2, smidr_el1, tpidr2_el0 and mpamsm_el1.
This patch is adding new SME mode selection and state access instructions:
* Add SMSTART and SMSTOP instructions.
* Add SVCR system register.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_sm_za): New parser.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-8-illegal.d: New test.
* testsuite/gas/aarch64/sme-8-illegal.l: New test.
* testsuite/gas/aarch64/sme-8-illegal.s: New test.
* testsuite/gas/aarch64/sme-8.d: New test.
* testsuite/gas/aarch64/sme-8.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_SM_ZA.
(enum aarch64_insn_class): New instruction classes
sme_start and sme_stop.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_pstatefield): New inserter.
(aarch64_ins_sme_sm_za): New inserter.
* aarch64-dis.c (aarch64_ext_imm): New extractor.
(aarch64_ext_pstatefield): New extractor.
(aarch64_ext_sme_sm_za): New extractor.
* aarch64-opc.c (operand_general_constraint_met_p):
New pstatefield value for SME instructions.
(aarch64_print_operand): Printout for OPND_SME_SM_ZA.
(SR_SME): New register SVCR.
* aarch64-opc.h (F_REG_IN_CRM): New register endcoding.
* aarch64-opc.h (F_IMM_IN_CRM): New immediate endcoding.
(PSTATE_ENCODE_CRM): Encode CRm field.
(PSTATE_DECODE_CRM): Decode CRm field.
(PSTATE_ENCODE_CRM_IMM): Encode CRm immediate field.
(PSTATE_DECODE_CRM_IMM): Decode CRm immediate field.
(PSTATE_ENCODE_CRM_AND_IMM): Encode CRm and immediate
field.
* aarch64-tbl.h (struct aarch64_opcode): New SMSTART
and SMSTOP instructions.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new loads and stores defined by SME instructions.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_address): New parser.
(parse_sme_za_hv_tiles_operand_with_braces): New parser.
(parse_sme_za_array): New parser.
(output_operand_error_record): Print error details if
present.
(parse_operands): Support new operands.
* testsuite/gas/aarch64/sme-5-illegal.d: New test.
* testsuite/gas/aarch64/sme-5-illegal.l: New test.
* testsuite/gas/aarch64/sme-5-illegal.s: New test.
* testsuite/gas/aarch64/sme-5.d: New test.
* testsuite/gas/aarch64/sme-5.s: New test.
* testsuite/gas/aarch64/sme-6-illegal.d: New test.
* testsuite/gas/aarch64/sme-6-illegal.l: New test.
* testsuite/gas/aarch64/sme-6-illegal.s: New test.
* testsuite/gas/aarch64/sme-6.d: New test.
* testsuite/gas/aarch64/sme-6.s: New test.
* testsuite/gas/aarch64/sme-7-illegal.d: New test.
* testsuite/gas/aarch64/sme-7-illegal.l: New test.
* testsuite/gas/aarch64/sme-7-illegal.s: New test.
* testsuite/gas/aarch64/sme-7.d: New test.
* testsuite/gas/aarch64/sme-7.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operands.
(enum aarch64_insn_class): Added sme_ldr and sme_str.
(AARCH64_OPDE_UNTIED_IMMS): New operand error kind.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_za_hv_tiles): New inserter.
(aarch64_ins_sme_za_list): New inserter.
(aarch64_ins_sme_za_array): New inserter.
(aarch64_ins_sme_addr_ri_u4xvl): New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): Added
ins_sme_za_list, ins_sme_za_array and ins_sme_addr_ri_u4xvl.
* aarch64-dis.c (aarch64_ext_sme_za_hv_tiles): New extractor.
(aarch64_ext_sme_za_list): New extractor.
(aarch64_ext_sme_za_array): New extractor.
(aarch64_ext_sme_addr_ri_u4xvl): New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): Added
ext_sme_za_list, ext_sme_za_array and ext_sme_addr_ri_u4xvl.
* aarch64-opc.c (operand_general_constraint_met_p):
(aarch64_match_operands_constraint): Handle sme_ldr, sme_str
and sme_misc.
(aarch64_print_operand): New operands supported.
* aarch64-tbl.h (OP_SVE_QUU): New qualifier.
(OP_SVE_QZU): New qualifier.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding ZERO (a list of 64-bit element ZA tiles)
instruction.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_list_of_64bit_tiles):
New parser.
(parse_operands): Handle OPND_SME_list_of_64bit_tiles.
* testsuite/gas/aarch64/sme-4-illegal.d: New test.
* testsuite/gas/aarch64/sme-4-illegal.l: New test.
* testsuite/gas/aarch64/sme-4-illegal.s: New test.
* testsuite/gas/aarch64/sme-4.d: New test.
* testsuite/gas/aarch64/sme-4.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_list_of_64bit_tiles.
opcodes/ChangeLog:
* aarch64-opc.c (print_sme_za_list): New printing function.
(aarch64_print_operand): Handle OPND_SME_list_of_64bit_tiles.
* aarch64-opc.h (enum aarch64_field_kind): New bitfield
FLD_SME_zero_mask.
* aarch64-tbl.h (struct aarch64_opcode): New ZERO instruction.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new MOV (alias) and MOVA SME instruction.
gas/ChangeLog:
* config/tc-aarch64.c (enum sme_hv_slice): new enum.
(struct reloc_entry): Added ZAH and ZAV registers.
(parse_sme_immediate): Immediate parser.
(parse_sme_za_hv_tiles_operand): ZA tile parser.
(parse_sme_za_hv_tiles_operand_index): Index parser.
(parse_operands): Added ZA tile parser calls.
(REGNUMS): New macro. Regs with suffix.
(REGSET16S): New macro. 16 regs with suffix.
* testsuite/gas/aarch64/sme-2-illegal.d: New test.
* testsuite/gas/aarch64/sme-2-illegal.l: New test.
* testsuite/gas/aarch64/sme-2-illegal.s: New test.
* testsuite/gas/aarch64/sme-2.d: New test.
* testsuite/gas/aarch64/sme-2.s: New test.
* testsuite/gas/aarch64/sme-2a.d: New test.
* testsuite/gas/aarch64/sme-2a.s: New test.
* testsuite/gas/aarch64/sme-3-illegal.d: New test.
* testsuite/gas/aarch64/sme-3-illegal.l: New test.
* testsuite/gas/aarch64/sme-3-illegal.s: New test.
* testsuite/gas/aarch64/sme-3.d: New test.
* testsuite/gas/aarch64/sme-3.s: New test.
* testsuite/gas/aarch64/sme-3a.d: New test.
* testsuite/gas/aarch64/sme-3a.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New enums
AARCH64_OPND_SME_ZA_HV_idx_src and
AARCH64_OPND_SME_ZA_HV_idx_dest.
(struct aarch64_opnd_info): New ZA tile vector struct.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_za_hv_tiles):
New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER):
New inserter ins_sme_za_hv_tiles.
* aarch64-dis.c (aarch64_ext_sme_za_hv_tiles):
New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR):
New extractor ext_sme_za_hv_tiles.
* aarch64-opc.c (aarch64_print_operand):
Handle SME_ZA_HV_idx_src and SME_ZA_HV_idx_dest.
* aarch64-opc.h (enum aarch64_field_kind): New enums
FLD_SME_size_10, FLD_SME_Q, FLD_SME_V and FLD_SME_Rv.
(struct aarch64_operand): Increase fields size to 5.
* aarch64-tbl.h (OP_SME_BHSDQ_PM_BHSDQ): New qualifiers
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
Patch is adding new SME matrix instructions. Please note additional
instructions will be added in following patches.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_zada_operand):
New parser.
* config/tc-aarch64.c (parse_reg_with_qual):
New reg parser.
* config/tc-aarch64.c (R_ZA): New egister type.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-illegal.d: New test.
* testsuite/gas/aarch64/sme-illegal.l: New test.
* testsuite/gas/aarch64/sme-illegal.s: New test.
* testsuite/gas/aarch64/sme.d: New test.
* testsuite/gas/aarch64/sme.s: New test.
* testsuite/gas/aarch64/sme-f64.d: New test.
* testsuite/gas/aarch64/sme-f64.s: New test.
* testsuite/gas/aarch64/sme-i64.d: New test.
* testsuite/gas/aarch64/sme-i64.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operands
AARCH64_OPND_SME_ZAda_2b, AARCH64_OPND_SME_ZAda_3b and
AARCH64_OPND_SME_Pm.
(enum aarch64_insn_class): New instruction class sme_misc.
opcodes/ChangeLog:
* aarch64-opc.c (aarch64_print_operand):
Print OPND_SME_ZAda_2b and OPND_SME_ZAda_3b operands.
(verify_constraints): Handle OPND_SME_Pm.
* aarch64-opc.h (enum aarch64_field_kind):
New bit fields FLD_SME_ZAda_2b, FLD_SME_ZAda_3b and FLD_SME_Pm.
* aarch64-tbl.h (OP_SME_ZADA_PN_PM_ZN_S): New qualifier set.
(OP_SME_ZADA_PN_PM_ZN_D): New qualifier.
(OP_SME_ZADA_PN_PM_ZN_ZM): New qualifier.
(OP_SME_ZADA_S_PM_PM_S_S): New qualifier.
(OP_SME_ZADA_D_PM_PM_D_D): New qualifier.
(OP_SME_ZADA_S_PM_PM_H_H): New qualifier.
(OP_SME_ZADA_S_PM_PM_B_B): New qualifier.
(OP_SME_ZADA_D_PM_PM_H_H): New qualifier.
(SME_INSN): New instruction macro.
(SME_F64_INSN): New instruction macro.
(SME_I64_INSN): New instruction macro.
(SME_INSNC): New instruction macro.
(struct aarch64_opcode): New SME instructions.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch adds support to four new system registers (RPAOS, RPALOS, PAALLOS,
PAALL) in conjunction with TLBI instruction. This change is part of RME (Realm
Management Extension).
gas/ChangeLog:
2021-04-19 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update news.
* testsuite/gas/aarch64/rme.d: Update test.
* testsuite/gas/aarch64/rme.s: Update test.
opcodes/ChangeLog:
2021-04-19 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-opc.c: Add new registers (RPAOS, RPALOS, PAALLOS, PAALL) support for
TLBI instruction.
This patch adds support to two new system registers (CIPAPA, CIGDPAPA) in
conjunction with DC instruction. This change is part of RME (Realm Management
Extension).
gas/ChangeLog:
2021-04-19 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* testsuite/gas/aarch64/rme.d: Update test.
* testsuite/gas/aarch64/rme.s: Update test.
opcodes/ChangeLog:
2021-04-19 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-opc.c: Add new register (CIPAPA, CIGDPAPA) support for
DC instruction.
This patch:
+ Adds new ACCDATA_EL1 (Accelerator Data) system register, see [0].
+ Adds LS64 instruction tests.
+ Update LS64 feature test with new register.
+ Fix comment for AARCH64_OPND_Rt_LS64.
[0] https://developer.arm.com/docs/ddi0595/i/aarch64-system-registers/accdata_el1
Note: as this is register only extension we do not want to hide these
registers behind -march flag going forward (they should be enabled by
default).
Atomic 64-byte load/store instructions limit Rt register number to
values matching below condition (register <Xt> number must be even
and <= 22):
if Rt<4:3> == '11' || Rt<0> == '1' then UNDEFINED;
This patch adds check if Rt fulfills above requirement.
For more details regarding atomic 64-byte load/store instruction for
Armv8.7 please refer to Arm A64 Instruction set documentation for
Armv8-A architecture profile, see document page 157 for load
instruction, and pages 414-418 for store instructions of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
This patch:
+ updates RAS feature system registers with new RAS 1.1 regs.
+ extends RAS/RAS 1.1 support for all architecture levels of Armv8-A.
Please note that early Armv8-A architectures do not officially support RAS
extension.
Rationale of the patch:
To ease development so that user-friendly RAS system registers operands can be
used. Certain use cases require developers to enable only more generic
architecture (e.g. -march=armv8-a) during system development. Users must use
RAS extension registers bearing in mind that system they use must support it.
The RAS (Reliability, Availability, Serviceability) extension is a
system-level extension that defines a number of system registers.
RAS 1.1 (FEAT_RASv1p1) introduces five new system registers:
ERXPFGCTL_EL1, ERXPFGCDN_EL1, ERXMISC2_EL1, ERXMISC3_EL1 and
ERXPFGF_EL1.
For details see [0].
[0] https://developer.arm.com/docs/ddi0595/i/
This patch adds:
+ New feature +csre to -march command line.
+ New instruction CSR PDEC associated with CSRE feature.
Please note that CSRE system registers were already upstreamed. This patch
should finalize CSRE feature implementation.
CSRE feature adds CSR PDEC (Decrements Call stack pointer by the size of
a Call stack record) instruction. Although this instruction has operand
(PDEC) it's instruction's only operand. PDEC forces instruction field Rt
to be set to 0b1111. This results in fixed opcode of the instruction.
gas/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update docs.
* config/tc-aarch64.c (parse_csr_operand): New operand parser.
(parse_operands): Call to CSR operand parser.
* testsuite/gas/aarch64/csre_csr-invalid.d: New test.
* testsuite/gas/aarch64/csre_csr-invalid.l: New test.
* testsuite/gas/aarch64/csre_csr-invalid.s: New test.
* testsuite/gas/aarch64/csre_csr.d: New test.
* testsuite/gas/aarch64/csre_csr.s: New test.
include/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_CSRE): New -march feature.
(enum aarch64_opnd): New CSR instruction field AARCH64_OPND_CSRE_CSR.
opcodes/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-opc.c (aarch64_print_operand): CSR PDEC operand print-out.
* aarch64-tbl.h (CSRE): New CSRE feature handler.
(_CSRE_INSN): New CSRE instruction type.
(struct aarch64_opcode): New 'csre' entry for a CSRE CLI feature.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
