binutils-gdb

mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-11-25 19:14:52 +08:00

Author	SHA1	Message	Date
Markus Metzger	118e6252ca	target: allow decr_pc_after_break to be defined by the target Allow the target to define which value to use in decr_pc_after_break. It defaults to gdbarch_decr_pc_after_break (GDBARCH). 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * target.h (struct target_ops) <to_decr_pc_after_break>: New. (forward_target_decr_pc_after_break) (target_decr_pc_after_break): New. * target.c (forward_target_decr_pc_after_break) (target_decr_pc_after_break): New. * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * linux-thread-db.c (check_event): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * record-full.c (record_full_wait_1): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break.	2014-01-16 13:12:00 +01:00
Yao Qi	b55e14c72c	Change to_xfer_partial 'len' type to ULONGEST. This patch changes to_xfer_partial's len's type to ULONGEST, and adjust its implementations. gdb: 2014-01-14 Yao Qi <yao@codesourcery.com> * target.h (target_xfer_partial_ftype): Update. (struct target_ops) <to_xfer_partial>: Change 'len' type to ULONGEST. * aix-thread.c (aix_thread_xfer_partial): Change type of argument 'len' to ULONGEST. * auxv.c (procfs_xfer_auxv): Likewise. (ld_so_xfer_auxv): Likewise. (memory_xfer_auxv): Likewise. * bfd-target.c (target_bfd_xfer_partial): Likewise. * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise. * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise. * corelow.c (core_xfer_partial): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * darwin-nat.c (darwin_read_write_inferior): Likewise. Use '%u'. (darwin_read_dyld_info): Likewise. (darwin_xfer_partial): Likewise. * exec.c (section_table_xfer_memory_partial): Likewise. (exec_xfer_partial): Likewise. * exec.h (section_table_xfer_memory_partial): Update declaration. * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest instead of plongest. (gnu_xfer_partial): Likewise. * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise. (ia64_hpux_xfer_solib_got): Likewise. (ia64_hpux_xfer_partial): Likewise. * ia64-linux-nat.c (ia64_linux_xfer_partial): * inf-ptrace.c (inf_ptrace_xfer_partial): * inf-ttrace.c (inf_ttrace_xfer_partial): * linux-nat.c (linux_xfer_siginfo): Likewise. (linux_nat_xfer_partial): Likewise. (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise. (linux_nat_xfer_osdata, linux_xfer_partial): Likewise. * monitor.c (monitor_xfer_memory): Likewise. (monitor_xfer_partial): Likewise. * procfs.c (procfs_xfer_partial): Likewise. * record-full.c (record_full_xfer_partial): Likewise. (record_full_core_xfer_partial): Likewise. * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest instead of plongest. (gdbsim_xfer_partial): Likewise. * remote.c (remote_xfer_partial): Likewise. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update declaration. * rs6000-nat.c (rs6000_xfer_partial): Likewise. (rs6000_xfer_shared_libraries): Likewise. * sol-thread.c (sol_thread_xfer_partial): Likewise. * sparc-nat.c (sparc_xfer_wcookie): Likewise. (sparc_xfer_partial): Likewise. * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. (spu_xfer_partial): Likewise. * spu-multiarch.c (spu_xfer_partial): Likewise. * target.c (target_read_live_memory): Likewise. (memory_xfer_live_readonly_partial): Likewise. (memory_xfer_partial, memory_xfer_partial_1): Likewise. (target_xfer_partial, default_xfer_partial): Likewise. (current_xfer_partial): Likewise. * tracepoint.c (tfile_xfer_partial): Likewise. * windows-nat.c (windows_xfer_memory): Likewise. Call pulongest instead of plongest. (windows_xfer_partial): Likewise. (windows_xfer_shared_libraries): Likewise.	2014-01-14 22:20:44 +08:00
Honggyu Kim	e261678878	Remove duplicated #include's from GDB This patch simply removes duplicated #include statements in the gdb/ directory. If there are two duplicated #include statements, this patch keeps the first #include and removes the second. Those duplicates have been found by using the checkincludes.pl tool from the Linux kernel and double checked manually once again if the #include statements are affected by #ifdef macros. 2014-01-06 Honggyu Kim <hong.gyu.kim@lge.com> * ada-lang.c: Remove duplicated include statements. * alphabsd-nat.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64fbsd-nat.c: Ditto. * auto-load.c: Ditto. * ax-gdb.c: Ditto. * breakpoint.c: Ditto. * dbxread.c: Ditto. * fork-child.c: Ditto. * gdb_usleep.c: Ditto. * i386-darwin-tdep.c: Ditto. * i386fbsd-nat.c: Ditto. * infcmd.c: Ditto. * inferior.c: Ditto. * jv-lang.c: Ditto. * linux-nat.c: Ditto. * linux-tdep.c: Ditto. * m68kbsd-nat.c: Ditto. * m68klinux-nat.c: Ditto. * microblaze-tdep.c: Ditto. * mips-linux-tdep.c: Ditto. * mn10300-tdep.c: Ditto. * nto-tdep.c: Ditto. * opencl-lang.c: Ditto. * osdata.c: Ditto. * printcmd.c: Ditto. * regcache.c: Ditto. * remote-m32r-sdi.c: Ditto. * remote.c: Ditto. * symfile.c: Ditto. * symtab.c: Ditto. * tilegx-linux-nat.c: Ditto. * tilegx-tdep.c: Ditto. * tracepoint.c: Ditto. * valops.c: Ditto. * vaxbsd-nat.c: Ditto. * windows-nat.c: Ditto. * xtensa-tdep.c: Ditto.	2014-01-07 14:14:30 -02:00
Joel Brobecker	ecd75fc8ee	Update Copyright year range in all files maintained by GDB.	2014-01-01 07:54:24 +04:00
Yao Qi	4ac248ca0b	Add target_xfer_partial_ftype This patch adds a typedef target_xfer_partial_ftype. When we change the signature of xfer_partial functions (for example, adding a new parameter), we don't have to modify all of their declarations. This patch also updates the type of parameters of target_xfer_partial from "void " to "gdb_byte ". gdb: 2013-12-18 Yao Qi <yao@codesourcery.com> * target.h (target_xfer_partial_ftype): New typedef. (target_xfer_partial): Update declaration. * auxv.h (memory_xfer_auxv): Likewise. * ia64-hpux-nat.c (super_xfer_partial): Likewise. * ia64-linux-nat.c (super_xfer_partial): Likewise. * linux-nat.c (super_xfer_partial): Likewise. * procfs.c (procfs_xfer_partial): Likewise. * record-full.c (record_full_beneath_to_xfer_partial): (tmp_to_xfer_partial): Likewise. * sparc-nat.c (inf_ptrace_xfer_partial): Likewise. * target.c (default_xfer_partial): Likewise. (current_xfer_partial): Likewise. (target_xfer_partial): Change parameter type to 'gdb_byte *'.	2013-12-18 11:47:03 +08:00
Yao Qi	cde33bf103	Replace sprintf with xsnprintf gdb: 2013-12-18 Yao Qi <yao@codesourcery.com> * linux-nat.c (linux_proc_xfer_partial): Call xsnprintf instead of sprintf. (linux_nat_detach, linux_child_pid_to_exec_file): Likewise. (linux_proc_pending_signals): Likewise.	2013-12-18 11:46:56 +08:00
Tom Tromey	53ce3c3929	remove gdb_stat.h This patch is purely mechanical. It removes gdb_stat.h and changes the code to use sys/stat.h. 2013-11-18 Tom Tromey <tromey@redhat.com> * common/gdb_stat.h: Remove. * ada-lang.c: Use sys/stat.h, not gdb_stat.h. * common/filestuff.c: Use sys/stat.h, not gdb_stat.h. * common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h. * corefile.c: Use sys/stat.h, not gdb_stat.h. * ctf.c: Use sys/stat.h, not gdb_stat.h. * darwin-nat.c: Use sys/stat.h, not gdb_stat.h. * dbxread.c: Use sys/stat.h, not gdb_stat.h. * dwarf2read.c: Use sys/stat.h, not gdb_stat.h. * exec.c: Use sys/stat.h, not gdb_stat.h. * gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h. * gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h. * inf-child.c: Use sys/stat.h, not gdb_stat.h. * jit.c: Use sys/stat.h, not gdb_stat.h. * linux-nat.c: Use sys/stat.h, not gdb_stat.h. * m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h. * main.c: Use sys/stat.h, not gdb_stat.h. * mdebugread.c: Use sys/stat.h, not gdb_stat.h. * mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h. * nto-tdep.c: Use sys/stat.h, not gdb_stat.h. * objfiles.c: Use sys/stat.h, not gdb_stat.h. * procfs.c: Use sys/stat.h, not gdb_stat.h. * remote-fileio.c: Use sys/stat.h, not gdb_stat.h. * remote-mips.c: Use sys/stat.h, not gdb_stat.h. * remote.c: Use sys/stat.h, not gdb_stat.h. * rs6000-nat.c: Use sys/stat.h, not gdb_stat.h. * sol-thread.c: Use sys/stat.h, not gdb_stat.h. * solib-spu.c: Use sys/stat.h, not gdb_stat.h. * source.c: Use sys/stat.h, not gdb_stat.h. * symfile.c: Use sys/stat.h, not gdb_stat.h. * symmisc.c: Use sys/stat.h, not gdb_stat.h. * symtab.c: Use sys/stat.h, not gdb_stat.h. * top.c: Use sys/stat.h, not gdb_stat.h. * xcoffread.c: Use sys/stat.h, not gdb_stat.h.	2013-11-18 13:29:02 -07:00
Tom Tromey	2978b11100	remove gdb_dirent.h This removes gdb_dirent.h and updates the code to use dirent.h instead. It also removes the now-useless configure checks. 2013-11-18 Tom Tromey <tromey@redhat.com> * common/common.m4 (GDB_AC_COMMON): Don't use AC_HEADER_DIRENT. * common/gdb_dirent.h: Remove. * common/filestuff.c: Use dirent.h. * common/linux-osdata.c: Use dirent.h. (NAMELEN): Define. * config.in: Rebuild. * configure: Rebuild. * configure.ac: Don't use AC_HEADER_DIRENT. * linux-fork.c: Use dirent.h * linux-nat.c: Use dirent.h. * nto-procfs.c: Use dirent.h. * procfs.c: Use dirent.h. 2013-11-18 Tom Tromey <tromey@redhat.com> * config.in: Rebuild. * configure: Rebuild. * configure.ac: Don't use AC_HEADER_DIRENT.	2013-11-18 13:29:01 -07:00
Tom Tromey	0e9f083f4c	remove gdb_string.h This removes gdb_string.h. This patch is purely mechanical. I created it by running the two commands: git rm common/gdb_string.h perl -pi -e's/"gdb_string.h"/<string.h>/;' .[chyl] /.[chyl] 2013-11-18 Tom Tromey <tromey@redhat.com> common/gdb_string.h: Remove. * aarch64-tdep.c: Use string.h, not gdb_string.h. * ada-exp.y: Use string.h, not gdb_string.h. * ada-lang.c: Use string.h, not gdb_string.h. * ada-lex.l: Use string.h, not gdb_string.h. * ada-typeprint.c: Use string.h, not gdb_string.h. * ada-valprint.c: Use string.h, not gdb_string.h. * aix-thread.c: Use string.h, not gdb_string.h. * alpha-linux-tdep.c: Use string.h, not gdb_string.h. * alpha-mdebug-tdep.c: Use string.h, not gdb_string.h. * alpha-nat.c: Use string.h, not gdb_string.h. * alpha-osf1-tdep.c: Use string.h, not gdb_string.h. * alpha-tdep.c: Use string.h, not gdb_string.h. * alphanbsd-tdep.c: Use string.h, not gdb_string.h. * amd64-dicos-tdep.c: Use string.h, not gdb_string.h. * amd64-linux-nat.c: Use string.h, not gdb_string.h. * amd64-linux-tdep.c: Use string.h, not gdb_string.h. * amd64-nat.c: Use string.h, not gdb_string.h. * amd64-sol2-tdep.c: Use string.h, not gdb_string.h. * amd64fbsd-tdep.c: Use string.h, not gdb_string.h. * amd64obsd-tdep.c: Use string.h, not gdb_string.h. * arch-utils.c: Use string.h, not gdb_string.h. * arm-linux-nat.c: Use string.h, not gdb_string.h. * arm-linux-tdep.c: Use string.h, not gdb_string.h. * arm-tdep.c: Use string.h, not gdb_string.h. * arm-wince-tdep.c: Use string.h, not gdb_string.h. * armbsd-tdep.c: Use string.h, not gdb_string.h. * armnbsd-nat.c: Use string.h, not gdb_string.h. * armnbsd-tdep.c: Use string.h, not gdb_string.h. * armobsd-tdep.c: Use string.h, not gdb_string.h. * avr-tdep.c: Use string.h, not gdb_string.h. * ax-gdb.c: Use string.h, not gdb_string.h. * ax-general.c: Use string.h, not gdb_string.h. * bcache.c: Use string.h, not gdb_string.h. * bfin-tdep.c: Use string.h, not gdb_string.h. * breakpoint.c: Use string.h, not gdb_string.h. * build-id.c: Use string.h, not gdb_string.h. * buildsym.c: Use string.h, not gdb_string.h. * c-exp.y: Use string.h, not gdb_string.h. * c-lang.c: Use string.h, not gdb_string.h. * c-typeprint.c: Use string.h, not gdb_string.h. * c-valprint.c: Use string.h, not gdb_string.h. * charset.c: Use string.h, not gdb_string.h. * cli-out.c: Use string.h, not gdb_string.h. * cli/cli-cmds.c: Use string.h, not gdb_string.h. * cli/cli-decode.c: Use string.h, not gdb_string.h. * cli/cli-dump.c: Use string.h, not gdb_string.h. * cli/cli-interp.c: Use string.h, not gdb_string.h. * cli/cli-logging.c: Use string.h, not gdb_string.h. * cli/cli-script.c: Use string.h, not gdb_string.h. * cli/cli-setshow.c: Use string.h, not gdb_string.h. * cli/cli-utils.c: Use string.h, not gdb_string.h. * coffread.c: Use string.h, not gdb_string.h. * common/common-utils.c: Use string.h, not gdb_string.h. * common/filestuff.c: Use string.h, not gdb_string.h. * common/linux-procfs.c: Use string.h, not gdb_string.h. * common/linux-ptrace.c: Use string.h, not gdb_string.h. * common/signals.c: Use string.h, not gdb_string.h. * common/vec.h: Use string.h, not gdb_string.h. * core-regset.c: Use string.h, not gdb_string.h. * corefile.c: Use string.h, not gdb_string.h. * corelow.c: Use string.h, not gdb_string.h. * cp-abi.c: Use string.h, not gdb_string.h. * cp-support.c: Use string.h, not gdb_string.h. * cp-valprint.c: Use string.h, not gdb_string.h. * cris-tdep.c: Use string.h, not gdb_string.h. * d-lang.c: Use string.h, not gdb_string.h. * dbxread.c: Use string.h, not gdb_string.h. * dcache.c: Use string.h, not gdb_string.h. * demangle.c: Use string.h, not gdb_string.h. * dicos-tdep.c: Use string.h, not gdb_string.h. * disasm.c: Use string.h, not gdb_string.h. * doublest.c: Use string.h, not gdb_string.h. * dsrec.c: Use string.h, not gdb_string.h. * dummy-frame.c: Use string.h, not gdb_string.h. * dwarf2-frame.c: Use string.h, not gdb_string.h. * dwarf2loc.c: Use string.h, not gdb_string.h. * dwarf2read.c: Use string.h, not gdb_string.h. * elfread.c: Use string.h, not gdb_string.h. * environ.c: Use string.h, not gdb_string.h. * eval.c: Use string.h, not gdb_string.h. * event-loop.c: Use string.h, not gdb_string.h. * exceptions.c: Use string.h, not gdb_string.h. * exec.c: Use string.h, not gdb_string.h. * expprint.c: Use string.h, not gdb_string.h. * f-exp.y: Use string.h, not gdb_string.h. * f-lang.c: Use string.h, not gdb_string.h. * f-typeprint.c: Use string.h, not gdb_string.h. * f-valprint.c: Use string.h, not gdb_string.h. * fbsd-nat.c: Use string.h, not gdb_string.h. * findcmd.c: Use string.h, not gdb_string.h. * findvar.c: Use string.h, not gdb_string.h. * fork-child.c: Use string.h, not gdb_string.h. * frame.c: Use string.h, not gdb_string.h. * frv-linux-tdep.c: Use string.h, not gdb_string.h. * frv-tdep.c: Use string.h, not gdb_string.h. * gdb.c: Use string.h, not gdb_string.h. * gdb_bfd.c: Use string.h, not gdb_string.h. * gdbarch.c: Use string.h, not gdb_string.h. * gdbtypes.c: Use string.h, not gdb_string.h. * gnu-nat.c: Use string.h, not gdb_string.h. * gnu-v2-abi.c: Use string.h, not gdb_string.h. * gnu-v3-abi.c: Use string.h, not gdb_string.h. * go-exp.y: Use string.h, not gdb_string.h. * go-lang.c: Use string.h, not gdb_string.h. * go32-nat.c: Use string.h, not gdb_string.h. * hppa-hpux-tdep.c: Use string.h, not gdb_string.h. * hppa-linux-nat.c: Use string.h, not gdb_string.h. * hppanbsd-tdep.c: Use string.h, not gdb_string.h. * hppaobsd-tdep.c: Use string.h, not gdb_string.h. * i386-cygwin-tdep.c: Use string.h, not gdb_string.h. * i386-dicos-tdep.c: Use string.h, not gdb_string.h. * i386-linux-nat.c: Use string.h, not gdb_string.h. * i386-linux-tdep.c: Use string.h, not gdb_string.h. * i386-nto-tdep.c: Use string.h, not gdb_string.h. * i386-sol2-tdep.c: Use string.h, not gdb_string.h. * i386-tdep.c: Use string.h, not gdb_string.h. * i386bsd-tdep.c: Use string.h, not gdb_string.h. * i386gnu-nat.c: Use string.h, not gdb_string.h. * i386nbsd-tdep.c: Use string.h, not gdb_string.h. * i386obsd-tdep.c: Use string.h, not gdb_string.h. * i387-tdep.c: Use string.h, not gdb_string.h. * ia64-libunwind-tdep.c: Use string.h, not gdb_string.h. * ia64-linux-nat.c: Use string.h, not gdb_string.h. * inf-child.c: Use string.h, not gdb_string.h. * inf-ptrace.c: Use string.h, not gdb_string.h. * inf-ttrace.c: Use string.h, not gdb_string.h. * infcall.c: Use string.h, not gdb_string.h. * infcmd.c: Use string.h, not gdb_string.h. * inflow.c: Use string.h, not gdb_string.h. * infrun.c: Use string.h, not gdb_string.h. * interps.c: Use string.h, not gdb_string.h. * iq2000-tdep.c: Use string.h, not gdb_string.h. * irix5-nat.c: Use string.h, not gdb_string.h. * jv-exp.y: Use string.h, not gdb_string.h. * jv-lang.c: Use string.h, not gdb_string.h. * jv-typeprint.c: Use string.h, not gdb_string.h. * jv-valprint.c: Use string.h, not gdb_string.h. * language.c: Use string.h, not gdb_string.h. * linux-fork.c: Use string.h, not gdb_string.h. * linux-nat.c: Use string.h, not gdb_string.h. * lm32-tdep.c: Use string.h, not gdb_string.h. * m2-exp.y: Use string.h, not gdb_string.h. * m2-typeprint.c: Use string.h, not gdb_string.h. * m32c-tdep.c: Use string.h, not gdb_string.h. * m32r-linux-nat.c: Use string.h, not gdb_string.h. * m32r-linux-tdep.c: Use string.h, not gdb_string.h. * m32r-rom.c: Use string.h, not gdb_string.h. * m32r-tdep.c: Use string.h, not gdb_string.h. * m68hc11-tdep.c: Use string.h, not gdb_string.h. * m68k-tdep.c: Use string.h, not gdb_string.h. * m68kbsd-tdep.c: Use string.h, not gdb_string.h. * m68klinux-nat.c: Use string.h, not gdb_string.h. * m68klinux-tdep.c: Use string.h, not gdb_string.h. * m88k-tdep.c: Use string.h, not gdb_string.h. * macrocmd.c: Use string.h, not gdb_string.h. * main.c: Use string.h, not gdb_string.h. * mdebugread.c: Use string.h, not gdb_string.h. * mem-break.c: Use string.h, not gdb_string.h. * memattr.c: Use string.h, not gdb_string.h. * memory-map.c: Use string.h, not gdb_string.h. * mep-tdep.c: Use string.h, not gdb_string.h. * mi/mi-cmd-break.c: Use string.h, not gdb_string.h. * mi/mi-cmd-disas.c: Use string.h, not gdb_string.h. * mi/mi-cmd-env.c: Use string.h, not gdb_string.h. * mi/mi-cmd-stack.c: Use string.h, not gdb_string.h. * mi/mi-cmd-var.c: Use string.h, not gdb_string.h. * mi/mi-cmds.c: Use string.h, not gdb_string.h. * mi/mi-console.c: Use string.h, not gdb_string.h. * mi/mi-getopt.c: Use string.h, not gdb_string.h. * mi/mi-interp.c: Use string.h, not gdb_string.h. * mi/mi-main.c: Use string.h, not gdb_string.h. * mi/mi-parse.c: Use string.h, not gdb_string.h. * microblaze-rom.c: Use string.h, not gdb_string.h. * microblaze-tdep.c: Use string.h, not gdb_string.h. * mingw-hdep.c: Use string.h, not gdb_string.h. * minidebug.c: Use string.h, not gdb_string.h. * minsyms.c: Use string.h, not gdb_string.h. * mips-irix-tdep.c: Use string.h, not gdb_string.h. * mips-linux-tdep.c: Use string.h, not gdb_string.h. * mips-tdep.c: Use string.h, not gdb_string.h. * mips64obsd-tdep.c: Use string.h, not gdb_string.h. * mipsnbsd-tdep.c: Use string.h, not gdb_string.h. * mipsread.c: Use string.h, not gdb_string.h. * mn10300-linux-tdep.c: Use string.h, not gdb_string.h. * mn10300-tdep.c: Use string.h, not gdb_string.h. * monitor.c: Use string.h, not gdb_string.h. * moxie-tdep.c: Use string.h, not gdb_string.h. * mt-tdep.c: Use string.h, not gdb_string.h. * nbsd-tdep.c: Use string.h, not gdb_string.h. * nios2-linux-tdep.c: Use string.h, not gdb_string.h. * nto-procfs.c: Use string.h, not gdb_string.h. * nto-tdep.c: Use string.h, not gdb_string.h. * objc-lang.c: Use string.h, not gdb_string.h. * objfiles.c: Use string.h, not gdb_string.h. * opencl-lang.c: Use string.h, not gdb_string.h. * osabi.c: Use string.h, not gdb_string.h. * osdata.c: Use string.h, not gdb_string.h. * p-exp.y: Use string.h, not gdb_string.h. * p-lang.c: Use string.h, not gdb_string.h. * p-typeprint.c: Use string.h, not gdb_string.h. * parse.c: Use string.h, not gdb_string.h. * posix-hdep.c: Use string.h, not gdb_string.h. * ppc-linux-nat.c: Use string.h, not gdb_string.h. * ppc-sysv-tdep.c: Use string.h, not gdb_string.h. * ppcfbsd-tdep.c: Use string.h, not gdb_string.h. * ppcnbsd-tdep.c: Use string.h, not gdb_string.h. * ppcobsd-tdep.c: Use string.h, not gdb_string.h. * printcmd.c: Use string.h, not gdb_string.h. * procfs.c: Use string.h, not gdb_string.h. * prologue-value.c: Use string.h, not gdb_string.h. * python/py-auto-load.c: Use string.h, not gdb_string.h. * python/py-gdb-readline.c: Use string.h, not gdb_string.h. * ravenscar-thread.c: Use string.h, not gdb_string.h. * regcache.c: Use string.h, not gdb_string.h. * registry.c: Use string.h, not gdb_string.h. * remote-fileio.c: Use string.h, not gdb_string.h. * remote-m32r-sdi.c: Use string.h, not gdb_string.h. * remote-mips.c: Use string.h, not gdb_string.h. * remote-sim.c: Use string.h, not gdb_string.h. * remote.c: Use string.h, not gdb_string.h. * reverse.c: Use string.h, not gdb_string.h. * rs6000-aix-tdep.c: Use string.h, not gdb_string.h. * ser-base.c: Use string.h, not gdb_string.h. * ser-go32.c: Use string.h, not gdb_string.h. * ser-mingw.c: Use string.h, not gdb_string.h. * ser-pipe.c: Use string.h, not gdb_string.h. * ser-tcp.c: Use string.h, not gdb_string.h. * ser-unix.c: Use string.h, not gdb_string.h. * serial.c: Use string.h, not gdb_string.h. * sh-tdep.c: Use string.h, not gdb_string.h. * sh64-tdep.c: Use string.h, not gdb_string.h. * shnbsd-tdep.c: Use string.h, not gdb_string.h. * skip.c: Use string.h, not gdb_string.h. * sol-thread.c: Use string.h, not gdb_string.h. * solib-dsbt.c: Use string.h, not gdb_string.h. * solib-frv.c: Use string.h, not gdb_string.h. * solib-osf.c: Use string.h, not gdb_string.h. * solib-spu.c: Use string.h, not gdb_string.h. * solib-target.c: Use string.h, not gdb_string.h. * solib.c: Use string.h, not gdb_string.h. * somread.c: Use string.h, not gdb_string.h. * source.c: Use string.h, not gdb_string.h. * sparc-nat.c: Use string.h, not gdb_string.h. * sparc-sol2-tdep.c: Use string.h, not gdb_string.h. * sparc-tdep.c: Use string.h, not gdb_string.h. * sparc64-tdep.c: Use string.h, not gdb_string.h. * sparc64fbsd-tdep.c: Use string.h, not gdb_string.h. * sparc64nbsd-tdep.c: Use string.h, not gdb_string.h. * sparcnbsd-tdep.c: Use string.h, not gdb_string.h. * spu-linux-nat.c: Use string.h, not gdb_string.h. * spu-multiarch.c: Use string.h, not gdb_string.h. * spu-tdep.c: Use string.h, not gdb_string.h. * stabsread.c: Use string.h, not gdb_string.h. * stack.c: Use string.h, not gdb_string.h. * std-regs.c: Use string.h, not gdb_string.h. * symfile.c: Use string.h, not gdb_string.h. * symmisc.c: Use string.h, not gdb_string.h. * symtab.c: Use string.h, not gdb_string.h. * target.c: Use string.h, not gdb_string.h. * thread.c: Use string.h, not gdb_string.h. * tilegx-linux-nat.c: Use string.h, not gdb_string.h. * tilegx-tdep.c: Use string.h, not gdb_string.h. * top.c: Use string.h, not gdb_string.h. * tracepoint.c: Use string.h, not gdb_string.h. * tui/tui-command.c: Use string.h, not gdb_string.h. * tui/tui-data.c: Use string.h, not gdb_string.h. * tui/tui-disasm.c: Use string.h, not gdb_string.h. * tui/tui-file.c: Use string.h, not gdb_string.h. * tui/tui-layout.c: Use string.h, not gdb_string.h. * tui/tui-out.c: Use string.h, not gdb_string.h. * tui/tui-regs.c: Use string.h, not gdb_string.h. * tui/tui-source.c: Use string.h, not gdb_string.h. * tui/tui-stack.c: Use string.h, not gdb_string.h. * tui/tui-win.c: Use string.h, not gdb_string.h. * tui/tui-windata.c: Use string.h, not gdb_string.h. * tui/tui-winsource.c: Use string.h, not gdb_string.h. * typeprint.c: Use string.h, not gdb_string.h. * ui-file.c: Use string.h, not gdb_string.h. * ui-out.c: Use string.h, not gdb_string.h. * user-regs.c: Use string.h, not gdb_string.h. * utils.c: Use string.h, not gdb_string.h. * v850-tdep.c: Use string.h, not gdb_string.h. * valarith.c: Use string.h, not gdb_string.h. * valops.c: Use string.h, not gdb_string.h. * valprint.c: Use string.h, not gdb_string.h. * value.c: Use string.h, not gdb_string.h. * varobj.c: Use string.h, not gdb_string.h. * vax-tdep.c: Use string.h, not gdb_string.h. * vaxnbsd-tdep.c: Use string.h, not gdb_string.h. * vaxobsd-tdep.c: Use string.h, not gdb_string.h. * windows-nat.c: Use string.h, not gdb_string.h. * xcoffread.c: Use string.h, not gdb_string.h. * xml-support.c: Use string.h, not gdb_string.h. * xstormy16-tdep.c: Use string.h, not gdb_string.h. * xtensa-linux-nat.c: Use string.h, not gdb_string.h.	2013-11-18 13:29:00 -07:00
Tom Tromey	52554a0e32	constify to_detach This patch constifies the target_ops method to_detach. This is a small cleanup, but also, I think, a bug-prevention fix, since gdb already acts as if the "args" argument here was const. In particular, top.c:quit_force calls kill_or_detach via iterate_over_inferiors. kill_or_detach calls target_detach, passing the same argument each time. So, if one of these methods was not const-correct, then kill_or_detach would change its behavior in a strange way. I could not build every target I modified in this patch. I've inspected them all by hand, though. Many targets do not use the "args" parameter; a couple pass it to atoi; and a few pass it on to the to_detach method of the target beneath. The only code that required a real change was in linux-nat.c, and that only needed the introduction of a temporary variable for const-correctness. 2013-11-08 Tom Tromey <tromey@redhat.com> * aix-thread.c (aix_thread_detach): Update. * corelow.c (core_detach): Update. * darwin-nat.c (darwin_detach): Update. * dec-thread.c (dec_thread_detach): Update. * gnu-nat.c (gnu_detach): Update. * go32-nat.c (go32_detach): Update. * inf-ptrace.c (inf_ptrace_detach): Update. * inf-ttrace.c (inf_ttrace_detach): Update. * linux-fork.c (linux_fork_detach): Update. * linux-fork.h (linux_fork_detach): Update. * linux-nat.c (linux_nat_detach): Update. Introduce "tem" local for const-correctness. * linux-thread-db.c (thread_db_detach): Update. * monitor.c (monitor_detach): Update. * nto-procfs.c (procfs_detach): Update. * procfs.c (procfs_detach): Update. * record.c (record_detach): Update. * record.h (record_detach): Update. * remote-m32r-sdi.c (m32r_detach): Update. * remote-mips.c (mips_detach): Update. * remote-sim.c (gdbsim_detach): Update. * remote.c (remote_detach_1, remote_detach) (extended_remote_detach): Update. * sol-thread.c (sol_thread_detach): Update. * target.c (target_detach): Make "args" const. (init_dummy_target): Update. * target.h (struct target_ops) <to_detach>: Make argument const. (target_detach): Likewise. * windows-nat.c (windows_detach): Update.	2013-11-08 09:38:41 -07:00
Luis Machado	dfd4cc6311	* aarch64-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. Replace GET_LWP with ptid_get_lwp. * aix-thread.c (BUILD_THREAD, BUILD_LWP): Remove. Replace BUILD_THREAD with ptid_build. Replace BUILD_LWP with ptid_build. Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * alphabsd-nat.c: Replace PIDGET with ptid_get_pid. * amd64-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * amd64bsd-nat.c: Replace PIDGET with ptid_get_pid. * arm-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. Replace GET_LWP with ptid_get_lwp. * armnbsd-nat.c: Replace PIDGET with ptid_get_pid. * auxv.c: Likewise. * breakpoint.c: Likewise. * common/ptid.c (ptid_is_pid): Condense check for null_ptid and minus_one_ptid. (ptid_lwp_p): New function. (ptid_tid_p): New function. * common/ptid.h: Update comments for accessors. (ptid_lwp_p): New prototype. (ptid_tid_p): New prototype. * defs.h (PIDGET, TIDGET, MERGEPID): Do not define. * gcore.c: Replace PIDGET with ptid_get_pid. * gdbthread.h: Likewise. * gnu-nat.c: Likewise. * hppa-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * hppabsd-nat.c: Replace PIDGET with ptid_get_pid. * hppanbsd-nat.c: Likewise. * i386-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * i386bsd-nat.c: Replace PIDGET with ptid_get_pid. * ia64-linux-nat.c: Replace PIDGET with ptid_get_pid. * infcmd.c: Likewise. * inferior.h: Likewise. * inflow.c: Likewise. * infrun.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Replace PIDGET with ptid_get_pid. Replace GET_PID with ptid_get_pid. Replace is_lwp with ptid_lwp_p. Replace GET_LWP with ptid_get_lwp. Replace BUILD_LWP with ptid_build.	2013-09-30 11:50:12 +00:00
Luis Machado	07107ca6f9	* inf-child.c (inf_child_follow_fork) New parameter detach_fork. * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. * inf-ttrace.c (inf_ttrace_follow_fork): Likewise. * inferior.h (detach_fork): Remove. * infrun.c (detach_fork): Adjust comment and make it static. (follow_fork): Pass detach_fork parameter to target_follow_fork. * linux-nat.c (linux_child_follow_fork): New parameter detach_fork. * target.c (target_follow_fork): New parameter detach_fork. Pass detach_fork as parameter and print its value. * target.h (struct target_ops) <to_follow_fork>: New int parameter. (target_follow_fork): New parameter detach_fork.	2013-09-03 17:22:45 +00:00
Luis Machado	96d7229d2a	Unify ptrace options discovery code and make both GDB and gdbserver use it. gdb/ * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-nat.h and nat/linux-waitpid.h. (linux-waitpid.o): New object file rule. * common/linux-ptrace.c: Include nat/linux-waitpid.h. (current_ptrace_options): Moved from linux-nat.c. (linux_ptrace_test_ret_to_nx): Use type casts for ptrace parameters. (linux_fork_to_function): New function. (linux_grandchild_function): Likewise. (linux_child_function): Likewise. (linux_check_ptrace_features): New function, heavily based on linux-nat.c:linux_test_for_tracefork. (linux_enable_event_reporting): New function. (ptrace_supports_feature): Likewise. (linux_supports_tracefork): Likewise. (linux_supports_traceclone): Likewise. (linux_supports_tracevforkdone): Likewise. (linux_supports_tracesysgood): Likewise. * common/linux-ptrace.h (HAS_NOMMU): Moved from gdbserver/linux-low.c. (linux_enable_event_reporting): New declaration. (linux_supports_tracefork): Likewise. (linux_supports_traceclone): Likewise. (linux_supports_tracevforkdone): Likewise. (linux_supports_tracesysgood): Likewise. * config.in (PTRACE_TYPE_ARG4): Regenerate. * config/aarch64/linux.mh (NATDEPFILES): Add linux-waitpid.o. * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise. * config/arm/linux.mh (NATDEPFILES): Likewise. * config/i386/linux.mh (NATDEPFILES): Likewise. * config/i386/linux64.mh (NATDEPFILES): Likewise. * config/ia64/linux.mh (NATDEPFILES): Likewise. * config/m32r/linux.mh (NATDEPFILES): Likewise. * config/m68k/linux.mh (NATDEPFILES): Likewise. * config/mips/linux.mh (NATDEPFILES): Likewise. * config/pa/linux.mh (NATDEPFILES): Likewise.. * config/powerpc/linux.mh (NATDEPFILES): Likewise.. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise. * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise. * config/sparc/linux.mh (NATDEPFILES): Likewise. * config/sparc/linux64.mh (NATDEPFILES): Likewise. * config/tilegx/linux.mh (NATDEPFILES): Likewise. * config/xtensa/linux.mh (NATDEPFILES): Likewise. * configure.ac (AC_CACHE_CHECK): Add void * to the list of ptrace's 4th argument's types. Check the type of PTRACE_TYPE_ARG4. * configure: Regenerate. * linux-nat.c: Include nat/linux-nat.h and nat/linux-waitpid.h. (SYSCALL_SIGTRAP): Moved to nat/linux-nat.h. (linux_supports_tracefork_flag): Remove. (linux_supports_tracesysgood_flag): Likewise. (linux_supports_tracevforkdone_flag): Likewise. (current_ptrace_options): Moved to common/linux-ptrace.c. (linux_tracefork_child): Remove. (my_waitpid): Remove. (linux_test_for_tracefork): Renamed to linux_check_ptrace_features and moved to common/linux-ptrace.c. (linux_test_for_tracesysgood): Remove. (linux_supports_tracesysgood): Remove. (linux_supports_tracefork): Remove. (linux_supports_tracevforkdone): Remove. (linux_enable_tracesysgood): Remove. (linux_enable_event_reporting): Remove. (linux_init_ptrace): New function. (linux_child_post_attach): Call linux_init_ptrace. (linux_child_post_startup_inferior): Call linux_init_ptrace. (linux_child_follow_fork): Call linux_supports_tracefork and linux_supports_tracevforkdone. (linux_child_insert_fork_catchpoint): Call linux_supports_tracefork. (linux_child_insert_vfork_catchpoint): Likewise. (linux_child_set_syscall_catchpoint): Call linux_supports_tracesysgood. (lin_lwp_attach_lwp): Call linux_supports_tracefork. * nat/linux-nat.h: New file. * nat/linux-waitpid.c: New file. * nat/linux-waitpid.h: New file. gdb/gdbserver/ * Makefile.in: Explain why ../target and ../nat are not listed as include file search paths. (linux-waitpid.o): New object file rule. * configure.srv (srv_native_linux_obj): New variable. Replace all occurrences of linux native object files with $srv_native_linux_obj. * linux-low.c: Include nat/linux-nat.h and nat/linux-waitpid.h. (HAS_NOMMU): Move defining logic to common/linux-ptrace.c. (linux_enable_event_reporting): Remove declaration. (my_waitpid): Moved to common/linux-waitpid.c. (linux_wait_for_event): Pass ptid when calling linux_enable_event_reporting. (linux_supports_tracefork_flag): Remove. (linux_enable_event_reporting): Likewise. (linux_tracefork_grandchild): Remove. (STACK_SIZE): Moved to common/linux-ptrace.c. (linux_tracefork_child): Remove. (linux_test_for_tracefork): Remove. (linux_look_up_symbols): Call linux_supports_traceclone. (initialize_low): Remove call to linux_test_for_tracefork. * linux-low.h (PTRACE_TYPE_ARG3): Move to common/linux-ptrace.h. (PTRACE_TYPE_ARG4): Likewise. Include linux-ptrace.h.	2013-08-22 23:46:30 +00:00
Pedro Alves	12696c1090	linux-nat.c: no need to block child signals so aggressively. In http://sourceware.org/ml/gdb-patches/2013-08/msg00174.html , the issue of child signal handling around ptrace option support discovery being different between GDB and GDBserver came up. I recalled adding these block_child_signals calls, and the "We don't want those ptrace calls to be interrupted" comment, but not exactly why. So I looked into it. My first guess is that I got confused. The patch that added this <http://sourceware.org/ml/gdb-patches/2009-04/msg00125.html> rewrote the linux native async support completely, and the old async support code had the SIGCHLD handler itself do waitpid, so in places that we'd want a blocking waitpid, we'd have to have the signal handler blocked. That was probably the mindset I had at the time. Anyway, whatever the case, looks like I was wrong on the need for this blocking. Given GDBserver doesn't block like this, I investigated why this is currently needed on GDB but not on GDBserver. I removed the block_child_signals (and restore) calls, and hacked linux-nat.c to call linux_test_for_tracefork in a loop, like: @@ -534,7 +534,10 @@ static int linux_supports_tracefork (int pid) { if (linux_supports_tracefork_flag == -1) - linux_test_for_tracefork (pid); + { + while (1) + linux_test_for_tracefork (pid); + } return linux_supports_tracefork_flag; } Running the resulting GDB, I then saw bad things happening. Specifically, I'd end up with a bunch of zombies, and eventually, the machine would refuse to spawn new processes, claming insufficient resources. The issue is that linux_test_for_tracefork test forks, and has the child fork again. If we don't block SIGCHLD on entry to the function, the children will inherit SIGCHLD's action/disposition (meaning, SIGCHLD will be unblocked in the child). When the first child forks again a second child, and that child exits, the first child gets a SIGCHLD. Now, when we try to wrap up for the whole options test, we kill the first child, and collect the waitstatus. Here, when SIGCHLD isn't blocked, GDB will first see the child reporting a stop with SIGCHLD. gdbserver's ptrace options test does a PTRACE_KILL loop at the end, which catches the SIGCHLD, and retries the kill. The GDB version did not do that. So the GDB version would proceed, leaving the child zombie (until GDB exists), as nothing collected its final waitstatus. So this patch makes the GDB version of linux_test_for_tracefork do the exact same as the GDBserver version, removes all this unnecessary blocking throughout, and adds a couple comments at places that do need it -- namely: places where we'll use sleep with sigsuspend; and linux_async_pipe, as that destroys the pipe the signal handler touches. Tested on x86_64 Fedora 17, sync and async. gdb/ 2013-08-19 Pedro Alves <palves@redhat.com> * linux-nat.c (linux_test_for_tracefork) (linux_test_for_tracesysgood, linux_child_follow_fork) (lin_lwp_attach_lwp, linux_nat_resume): Don't block child signals. (linux_nat_wait_1): Extend comment. (linux_async_pipe): Add comment.	2013-08-19 13:44:41 +00:00
Pedro Alves	d8d2a3ee47	Normalize on PATH_MAX instead of MAXPATHLEN throughout. With the pathmax gnulib module in place, we can use PATH_MAX consistently throughout, instead of the current mixbag of PATH_MAX and MAXPATHLEN uses. It's no longer necessary to include sys/param.h (supposedly, I can't check all ports touched here) for MAXPATHLEN. Don't remove sys/param.h from GDB's configure.ac, as later tests in the file use HAVE_SYS_PARAM_H checks. Tested on x86_64 Fedora 17. Also cross-built for --host=i686-w64-mingw32, and --host=i586-pc-msdosdjgpp. gdb/ 2013-07-01 Pedro Alves <palves@redhat.com> * defs.h: Include "pathmax.h". * utils.c: Don't include sys/param.h. (gdb_realpath): Remove code that checks for MAXPATHLEN. * solib-ia64-hpux.c (ia64_hpux_handle_load_event): Use PATH_MAX instead of MAXPATHLEN. * solib-sunos.c: Don't include sys/param.h. * xcoffread.c: Don't include sys/param.h. * bsd-kvm.c: Don't include sys/param.h. * darwin-nat.c: Don't include sys/param.h. (darwin_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN. * darwin-nat-info.c: Don't include sys/param.h. * fbsd-nat.c (fbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN. * i386obsd-nat.c: Don't include sys/param.h. * inf-child.c: Don't include sys/param.h. (inf_child_fileio_readlink): Use PATH_MAX instead of MAXPATHLEN. * linux-fork.c: Don't include sys/param.h. (fork_save_infrun_state): Use PATH_MAX instead of MAXPATHLEN. * linux-nat.c: Don't include sys/param.h. (linux_child_pid_to_exec_file, linux_proc_pending_signals) (linux_proc_pending_signals): Use PATH_MAX instead of MAXPATHLEN. * m68klinux-nat.c: Don't include sys/param.h. * nbsd-nat.c: Don't include sys/param.h. (nbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN. * ppc-linux-nat.c: Don't include sys/param.h. * rs6000-nat.c: Don't include sys/param.h. * spu-linux-nat.c. Don't include sys/param.h. * windows-nat.c: Don't include sys/param.h. * xtensa-linux-nat.c: Don't include sys/param.h. * config/i386/nm-fbsd.h: Don't include sys/param.h. gdb/gdbserver/ 2013-07-01 Pedro Alves <palves@redhat.com> * server.h: Include "pathmax.h". * linux-low.c: Don't include sys/param.h. (linux_pid_exe_is_elf_64_file): Use PATH_MAX instead of MAXPATHLEN. * win32-low.c: Don't include sys/param.h. (win32_create_inferior): Use PATH_MAX instead of MAXPATHLEN.	2013-07-01 11:28:30 +00:00
Tom Tromey	614c279dda	PR gdb/7912: * Makefile.in (SFILES): Add filestuff.c (COMMON_OBS): Add filestuff.o. (filestuff.o): New target. * auto-load.c (auto_load_objfile_script_1): Use gdb_fopen_cloexec. * auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec. * cli/cli-cmds.c (shell_escape): Call close_most_fds. * cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec. * common/agent.c (gdb_connect_sync_socket): Use gdb_socket_cloexec. * common/filestuff.c: New file. * common/filestuff.h: New file. * common/linux-osdata.c (linux_common_core_of_thread) (command_from_pid, commandline_from_pid, print_source_lines) (linux_xfer_osdata_shm, linux_xfer_osdata_sem) (linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use gdb_fopen_cloexec. * common/linux-procfs.c (linux_proc_get_int) (linux_proc_pid_has_state): Use gdb_fopen_cloexec. * config.in, configure: Rebuild. * configure.ac: Don't check for sys/socket.h. Check for fdwalk, pipe2. * corelow.c (core_open): Use gdb_open_cloexec. * dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec. * fork-child.c (fork_inferior): Call close_most_fds. * gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec. * inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec. * linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals): Use gdb_fopen_cloexec. (linux_proc_xfer_partial, linux_proc_xfer_spu): Use gdb_open_cloexec. (linux_async_pipe): Use gdb_pipe_cloexec. * remote-fileio.c (remote_fileio_func_open): Use gdb_open_cloexec. * remote.c (remote_file_put, remote_file_get): Use gdb_fopen_cloexec. * ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec, close_most_fds. * ser-tcp.c (net_open): Use gdb_socket_cloexec. * ser-unix.c (hardwire_open): Use gdb_open_cloexec. * solib.c (solib_find): Use gdb_open_cloexec. * source.c (openp, find_and_open_source): Use gdb_open_cloexec. * tracepoint.c (tfile_start): Use gdb_fopen_cloexec. (tfile_open): Use gdb_open_cloexec. * tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec. * ui-file.c (gdb_fopen): Use gdb_fopen_cloexec. * xml-support.c (xml_fetch_content_from_file): Use gdb_fopen_cloexec. * main.c (captured_main): Call notice_open_fds. gdbserver * Makefile.in (SFILES): Add filestuff.c. (OBS): Add filestuff.o. (filestuff.o): New target. * config.in, configure: Rebuild. * configure.ac: Check for fdwalk, pipe2.	2013-04-22 16:46:15 +00:00
Pedro Alves	3e74e146f2	Linux: No need to set ptrace event options in fork/clone children. Oleg Nesterov told me that the Linux kernel copies the parent's ptrace options to fork/clone children, so there's no need for GDB to do that manually. I was actually a bit surprised, since I thought the ptracer had to always set the ptrace options itself, and GDB is indeed calling PTRACE_SETOPTIONS for each new fork child, if it'll stay attached. Looking at the history of that code, I found that is was actually I who added that set-ptrace-options-in-children bit, back in http://sourceware.org/ml/gdb-patches/2009-05/msg00656.html. But, honestly, I don't recall why I needed that. I think I may have just blindly believed it was necessary. I then looked back at the history of all the PTRACE_SETOPTIONS code we have, and found that gdb never did copy the ptrace options before my patch. But, when gdbserver learnt to use PTRACE_EVENT_CLONE, at http://sourceware.org/ml/gdb-patches/2007-10/msg00547.html, it was made to do 'ptrace (PTRACE_SETOPTIONS, new_pid, 0, PTRACE_O_TRACECLONE)' for all new clones. Hmmm. But, GDB itself never did that, so it can't really ever have been necessary, I believe, otherwise GDB should have been doing it too. (GDBserver doesn't support following forks, and so naturally doesn't do any PTRACE_SETOPTIONS on fork children.) So this patch removes the -I believe- unnecessary ptrace syscalls. Tested on x86_64 Fedora 17, native/gdbserver, and on x86_64 RHEL5 native/gdbserver (Linux 2.6.18, I think a ptrace-on-utrace kernel). No regressions. gdb/ 2013-03-22 Pedro Alves <palves@redhat.com> * linux-nat.c (linux_child_follow_fork): Don't call linux_enable_event_reporting. (linux_handle_extended_wait): Don't call linux_enable_event_reporting. gdb/gdbserver/ 2013-03-22 Pedro Alves <palves@redhat.com> * linux-low.c (handle_extended_wait): Don't call linux_enable_event_reporting.	2013-03-22 14:52:26 +00:00
Jan Kratochvil	460014f572	gdb/ Code cleanup. * bfd-target.c (target_bfd_xclose): Remove parameter quitting. * bsd-kvm.c (bsd_kvm_close): Likewise. * bsd-uthread.c (bsd_uthread_close): Likewise. * corelow.c (core_close): Likewise. (core_close_cleanup): Remove parameter quitting from a caller. * event-top.c (async_disconnect): Likewise. * exec.c (exec_close_1): Remove parameter quitting. * go32-nat.c (go32_close): Likewise. * linux-nat.c (linux_nat_close): Remove parameter quitting. Remove parameter quitting from a caller. * mips-linux-nat.c (super_close): Remove parameter quitting from the variable. (mips_linux_close): Remove parameter quitting. Remove parameter quitting from a caller. * monitor.c (monitor_close): Remove parameter quitting. * monitor.h (monitor_close): Likewise. * record-btrace.c (record_btrace_close): Likewise. * record-full.c (record_full_close): Likewise. * remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove it also from fprintf_unfiltered. * remote-mips.c (mips_close): Remove parameter quitting. (mips_detach): Remove parameter quitting from a caller. * remote-sim.c (gdbsim_close): Remove parameter quitting. (gdbsim_close): Remove duplicate function comment. Remove parameter quitting and remove it also from printf_filtered. * remote.c (remote_close): Remove parameter quitting. * solib-svr4.c (enable_break): Remove parameter quitting from a caller. * target.c (update_current_target): Remove parameter int from to_close de_fault. (push_target, unpush_target, pop_target): Remove parameter quitting from a caller. (pop_all_targets_above, pop_all_targets): Remove parameter quitting. Remove parameter quitting from a caller. (target_preopen): Remove parameter quitting from a caller. (target_close): Remove parameter quitting. Remove parameter quitting from a caller two times. Remove parameter quitting also from fprintf_unfiltered. * target.h (struct target_ops): Remove parameter quitting and as int from fields to_xclose and to_close. (extern struct target_ops current_target): (target_close, pop_all_targets): Remove parameter quitting. Update the comment. (pop_all_targets_above): Remove parameter quitting. * top.c (quit_target): Remove parameter quitting from a caller. * tracepoint.c (tfile_close): Remove parameter quitting. * windows-nat.c (windows_close): Remove parameter quitting.	2013-03-20 15:46:24 +00:00
Pedro Alves	26cb8b7c1a	[native x86 GNU/Linux] Access debug register mirror from the corresponding process. While reviewing the native AArch64 patch, I noticed a problem: On 02/06/2013 08:46 PM, Pedro Alves wrote: > >> > +static void >> > +aarch64_linux_prepare_to_resume (struct lwp_info lwp) >> > +{ >> > + struct arch_lwp_info info = lwp->arch_private; >> > + >> > + /* NULL means this is the main thread still going through the shell, >> > + or, no watchpoint has been set yet. In that case, there's >> > + nothing to do. / >> > + if (info == NULL) >> > + return; >> > + >> > + if (DR_HAS_CHANGED (info->dr_changed_bp) >> > + \|\| DR_HAS_CHANGED (info->dr_changed_wp)) >> > + { >> > + int tid = GET_LWP (lwp->ptid); >> > + struct aarch64_debug_reg_state state = aarch64_get_debug_reg_state (); > Hmm. This is always fetching the debug_reg_state of > the current inferior, but may not be the inferior of lwp. > I see the same bug on x86. Sorry about that. I'll fix it. A natural fix would be to make xxx_get_debug_reg_state take an inferior argument, but that doesn't work because of the case where we detach breakpoints/watchpoints from the child fork, at a time there's no inferior for the child fork at all. We do a nasty hack in i386_inferior_data_get, but that relies on all callers pointing the current inferior to the correct inferior, which isn't actually being done by all callers, and I don't think we want to enforce that -- deep in the bowls of linux-nat.c, there are many cases we resume lwps behind the scenes, and it's be better to not have that code rely on global state (as it doesn't today). The fix is to decouple the watchpoints code from inferiors, making it track target processes instead. This way, we can freely keep track of the watchpoint mirrors for these processes behind the core's back. Checkpoints also play dirty tricks with swapping the process behind the inferior, so they get special treatment too in the patch (which just amounts to calling a new hook). Instead of the old hack in i386_inferior_data_get, where we returned a copy of the current inferior's debug registers mirror, as soon as we detect a fork in the target, we copy the debug register mirror from the parent to the child process. I don't have an old kernel handy to test, but I stepped through gdb doing the watchpoint removal in the fork child in the watchpoint-fork test seeing that the debug registers end up cleared in the child. I didn't find the need for linux_nat_iterate_watchpoint_lwps. If we use plain iterate_over_lwps instead, what happens is that when removing watchpoints, that iterate_over_lwps doesn't actually iterate over anything, since the fork child is not added to the lwp list until later, at detach time, in linux_child_follow_fork. And if we don't iterate over that lwp, we don't mark its debug registers as needing update. But linux_child_follow_fork takes care of doing that explicitly: child_lp = add_lwp (inferior_ptid); child_lp->stopped = 1; child_lp->last_resume_kind = resume_stop; make_cleanup (delete_lwp_cleanup, child_lp); /* CHILD_LP has new PID, therefore linux_nat_new_thread is not called for it. See i386_inferior_data_get for the Linux kernel specifics. Ensure linux_nat_prepare_to_resume will reset the hardware debug registers. It is done by the linux_nat_new_thread call, which is being skipped in add_lwp above for the first lwp of a pid. / gdb_assert (num_lwps (GET_PID (child_lp->ptid)) == 1); if (linux_nat_new_thread != NULL) linux_nat_new_thread (child_lp); if (linux_nat_prepare_to_resume != NULL) linux_nat_prepare_to_resume (child_lp); ptrace (PTRACE_DETACH, child_pid, 0, 0); so unless I'm missing something (quite possible) it ends up all the same. But, the !detach-on-fork, and the "follow-fork child" paths should also call linux_nat_new_thread, and they don't presently. It seems to me in those cases we're not clearing debug regs correctly when that's needed. Instead of copying that bit that works around add_lwp bypassing the linux_nat_new_thread call, I thought it'd be better to add an add_initial_lwp call to be used in the case we really need to bypass linux_nat_new_thread, and make add_lwp always call linux_nat_new_thread. i386_cleanup_dregs is rewritten to forget about the current process debug mirrors, which takes cares of other i386 ports. Only a couple of extra tweaks here and there were needed, as some targets wheren't actually calling i386_cleanup_dregs. Tested on Fedora 17 x86_64 -m64/-m32. GDBserver already fetches the i386_debug_reg_state from the right process, and, it doesn't handle forks at all, so no fix is needed over there. gdb/ 2013-02-13 Pedro Alves <palves@redhat.com> amd64-linux-nat.c (update_debug_registers_callback): Update comment. (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use iterate_over_lwps. (amd64_linux_prepare_to_resume): Pass the lwp's pid to i386_debug_reg_state. (amd64_linux_new_fork): New function. (_initialize_amd64_linux_nat): Install amd64_linux_new_fork as linux_nat_new_fork hook, and i386_forget_process as linux_nat_forget_process hook. * i386-linux-nat.c (update_debug_registers_callback): Update comment. (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use iterate_over_lwps. (i386_linux_prepare_to_resume): Pass the lwp's pid to i386_debug_reg_state. (i386_linux_new_fork): New function. (_initialize_i386_linux_nat): Install i386_linux_new_fork as linux_nat_new_fork hook, and i386_forget_process as linux_nat_forget_process hook. * i386-nat.c (i386_init_dregs): Delete. (i386_inferior_data, struct i386_inferior_data): Delete. (struct i386_process_info): New. (i386_process_list): New global. (i386_find_process_pid, i386_add_process, i386_process_info_get): New functions. (i386_inferior_data_get): Delete. (i386_process_info_get): New function. (i386_debug_reg_state): New parameter 'pid'. Reimplement. (i386_forget_process): New function. (i386_cleanup_dregs): Rewrite. (i386_update_inferior_debug_regs, i386_insert_watchpoint) (i386_remove_watchpoint, i386_region_ok_for_watchpoint) (i386_stopped_data_address, i386_insert_hw_breakpoint) (i386_remove_hw_breakpoint): Adjust to pass the current process id to i386_debug_reg_state. (i386_use_watchpoints): Don't register inferior data. * i386-nat.h (i386_debug_reg_state): Add new 'pid' parameter, and adjust comment. (i386_forget_process): Declare. * linux-fork.c (delete_fork): Call linux_nat_forget_process. * linux-nat.c (linux_nat_new_fork, linux_nat_forget_process_hook): New static globals. (linux_child_follow_fork): Don't call linux_nat_new_thread here. (add_initial_lwp): New, factored out from ... (add_lwp): ... this. Don't check the number of lwps before calling linux_nat_new_thread. (linux_nat_iterate_watchpoint_lwps): Delete. (linux_nat_attach): Use add_initial_lwp instead of add_lwp. (linux_handle_extended_wait): Call the linux_nat_new_fork hook on forks and vforks. (linux_nat_wait_1): Use add_initial_lwp instead of add_lwp for the initial lwp. (linux_nat_kill, linux_nat_mourn_inferior): Call linux_nat_forget_process. (linux_nat_set_new_fork, linux_nat_set_forget_process) (linux_nat_forget_process): New functions. * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): Delete type. (linux_nat_iterate_watchpoint_lwps): Delete declaration. (linux_nat_new_fork_ftype, linux_nat_forget_process_ftype): New types. (linux_nat_set_new_fork, linux_nat_set_forget_process) (linux_nat_forget_process): New declarations. * amd64fbsd-nat.c (super_mourn_inferior): New global. (amd64fbsd_mourn_inferior): New function. (_initialize_amd64fbsd_nat): Override to_mourn_inferior. * windows-nat.c (windows_detach): Call i386_cleanup_dregs.	2013-02-13 14:59:49 +00:00
Aleksandar Ristovski	5799c0b969	2013-01-31 Aleksandar Ristovski <aristovski@qnx.com> * charset.c (intermediate_encoding): Remove unused i. * completer.c (signal_completer): Remove unused i. * continuations.c (discard_my_continuations_1): Remove unused continuation_ptr. * corelow.c (core_close): Remove unuseD name. (get_core_siginfo): Remove unused pid. * cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused i, cps. * dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset. (loclist_describe_location): Remove unused first. * event-top.c (command_line_handler): Remove unused got_eof. * exec.c (exec_close_1): Remove unused need_symtab_cleanup. (resize_section_table): Remove unused old_value. * gdb_bfd.c (gdb_bfd_map_section): Remove unused header. * gnu-v3-abi.c (compute_vtable_size): Remove unused addr. * i386-tdep.c (i386_process_record): Remove unused rex. * infcmd.c (get_return_value): Remove unused uiout. * jv-lang.c (type_from_class): Remove unused is_array. * jv-valprint.c (java_val_print): Remove unused i. * linux-nat.c (linux_nat_stop_lwp): Remove unused ptid. * linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid. * m2-typeprint.c (m2_print_type): Remove unused code. * macroexp.c (get_character_constant): Remove unused body_start. (macro_stringify): Remove unused result. * objc-lang.c (find_methods): Remove unused gdbarch. * objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2. * regcache.c (regcache_cooked_read): Remove unused gdbarch. * stack.c (print_frame_args): Remove unused summary. * thread.c (thread_apply_command): Remove unused p. * valarith.c (value_x_unop): Remove unused mangle_ptr. * valops.c (search_struct_method): Remove unused skip. * valprint.c (generic_val_print): Remove unused byte_order. * varobj.c (varobj_update): Remove unused changed. * cli/cli-cmds.c (complete_command): Remove unused next_item. (alias_command): Remove unused c. * mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c. * mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused format. (mi_cmd_data_write_memory): Remove unused word_format. (mi_cmd_data_write_memory_bytes): Remove unused r. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused p_start, p_end. * python/python.c (_initialize_python): Remove unused cmd_name, cmd. * tui/tui-disasm.c (tui_set_disassem_content): Remove unused line_width. Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00766.html	2013-01-31 18:37:39 +00:00
Joel Brobecker	28e7fd6234	Update years in copyright notice for the GDB files. Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.	2013-01-01 06:33:28 +00:00
Pedro Alves	0270a750ba	gdb/ 2012-11-26 Maxime Villard <rustyBSD@gmx.fr> Pedro Alves <palves@redhat.com> * common/linux-osdata.c (linux_xfer_osdata_fds): Decrease buffer size parameter passed to readlink by one byte. * fbsd-nat.c (fbsd_pid_to_exec_file): Ditto. * linux-nat.c (linux_child_pid_to_exec_file): Ditto. * nbsd-nat.c (nbsd_pid_to_exec_file): Ditto. * inf-child.c (inf_child_fileio_readlink): Decrease local buffer's size by one byte. gdb/gdbserver/ 2012-11-26 Maxime Villard <rustyBSD@gmx.fr> * hostio.c (handle_readlink): Decrease buffer size parameter passed to readlink by one byte.	2012-11-26 14:19:33 +00:00
Tom Tromey	f5656eadf4	* gdbarch.sh (target_gdbarch): Remove macro. (get_target_gdbarch): Rename to target_gdbarch. * gdbarch.c, gdbarch.h: Rebuild. * ada-tasks.c, aix-thread.c, amd64-linux-nat.c, arch-utils.c, arm-tdep.c, auxv.c, breakpoint.c, bsd-uthread.c, corefile.c, darwin-nat-info.c, dcache.c, dsrec.c, exec.c, fbsd-nat.c, filesystem.c, gcore.c, gnu-nat.c, i386-darwin-nat.c, i386-nat.c, ia64-vms-tdep.c, inf-ptrace.c, infcmd.c, jit.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, m32r-rom.c, memattr.c, mep-tdep.c, microblaze-tdep.c, mips-linux-nat.c, mips-linux-tdep.c, mips-tdep.c, monitor.c, moxie-tdep.c, nto-procfs.c, nto-tdep.c, ppc-linux-nat.c, proc-service.c, procfs.c, progspace.c, ravenscar-thread.c, record.c, remote-m32r-sdi.c, remote-mips.c, remote-sim.c, remote.c, rl78-tdep.c, rs6000-nat.c, rx-tdep.c, s390-nat.c, sol-thread.c, solib-darwin.c, solib-dsbt.c, solib-frv.c, solib-ia64-hpux.c, solib-irix.c, solib-pa64.c, solib-som.c, solib-spu.c, solib-sunos.c, solib-svr4.c, solib.c, spu-linux-nat.c, spu-multiarch.c, spu-tdep.c, symfile-mem.c, symfile.c, symtab.c, target-descriptions.c, target.c, target.h, tracepoint.c, windows-nat.c, windows-tdep.c, xcoffsolib.c, cli/cli-dump.c, common/agent.c, mi/mi-interp.c, python/py-finishbreakpoint.c, python/py-inferior.c, python/python.c: Update.	2012-11-09 19:58:03 +00:00
Pedro Alves	6ecd47299a	gdb/ 2012-11-09 Pedro Alves <palves@redhat.com> * gdbarch.sh (target_gdbarch) <gdbarch.h>: Reimplement as macro. (get_target_gdbarch) <gdbarch.h>: New function. (startup_gdbarch) <gdbarch.h>: Declare. <gdbarch.c> (target_gdbarch): Delete. <gdbarch.c> (deprecated_target_gdbarch_select_hack): Set the current inferior's gdbarch. <gdbarch.c> (get_target_gdbarch): New function. * inferior.c: Include target-descriptions.h. (free_inferior): Free target description info. (add_inferior_with_spaces): Set the inferior's initial architecture. (clone_inferior_command): Copy the original inferior's target description if it was user specified. (initialize_inferiors): Add comment. * inferior.h (struct target_desc_info): Forward declare. (struct inferior) <gdbarch>: New field. * linux-nat.c: Include target-descriptions.h. (linux_child_follow_fork): Copy the parent's architecture and target description to the child. * target-descriptions.c: Include inferior.h. (struct target_desc_info): New structure, holding the equivalents of ... (target_desc_fetched, current_target_desc) (target_description_filename): ... these removed globals. (get_tdesc_info, target_desc_info_from_user_p) (copy_inferior_target_desc_info, target_desc_info_free): New. (target_desc_fetched, current_target_desc) (target_description_filename): Reimplemented as convenience macros. (tdesc_filename_cmd_string): New global. (set_tdesc_filename_cmd): Copy the string manipulated by the "set tdescs filename ..." commands to the per-inferior equivalent. (show_tdesc_filename_cmd): Get the value to show from the per-inferior description filename. (_initilize_target_descriptions): Change the "set/show tdesc filename" commands' variable. * target-descriptions.h (struct target_desc, struct target_desc_info) (struct inferior): Forward declare. (target_find_description, target_clear_description) (target_current_description): Adjust comments. (copy_inferior_target_desc_info, target_desc_info_free) (target_desc_info_from_user_p). Declare. gdb/testsuite/ 2012-11-09 Pedro Alves <palves@redhat.com> * gdb.multi/multi-arch.exp: New.	2012-11-09 01:47:20 +00:00
Joel Brobecker	d80ee84fe2	Change detach_breakpoints to take a ptid instead of a pid Before this change, detach_breakpoints would take a pid, and then set inferior_ptid to a ptid that it constructs using pid_to_ptid (pid). Unfortunately, this ptid is not necessarily valid. Consider for instance the case of ia64-hpux, where ttrace refuses a register-read operation if the LWP is not provided. This problems shows up when GDB is trying to handle fork events. Assuming GDB is configured to follow the parent, GDB will try to detach from the child. But before doing so, it needs to remove all breakpoints inside that child. On ia64, this involves reading inferior (the child's) memory. And on ia64-hpux, reading memory requires us to read the bsp and bspstore registers, in order to determine where that memory is relative to the value of those registers, and thus to determine which ttrace operation to use in order to fetch that memory (see ia64_hpux_xfer_memory). This patch therefore changes detach_breakpoints to take a ptid instead of a pid, and then updates all callers. One of the consequences of this patch is that it trips an assert on GNU/Linux targets. But this assert appears to have not actual purpose, and is thus removed. gdb/ChangeLog: * breakpoint.h (detach_breakpoints): pid parameter is now a ptid. * breakpoint.c (detach_breakpoints): Change pid parameter into a ptid. Adjust code accordingly. * infrun.c (handle_inferior_event): Delete variable child_pid. Update call to detach_breakpoints to pass the child ptid for fork events. * linux-nat.c (linux_nat_iterate_watchpoint_lwps): Remove assert that inferior_ptid's lwp is zero. (linux_handle_extended_wait): Update call to detach_breakpoints. * inf-ttrace.c (inf_ttrace_follow_fork): Update call to detach_breakpoints.	2012-08-16 23:54:50 +00:00
Yao Qi	ccce17b060	gdb/ * dwarf2loc.c (entry_values_debug): Add 'unsigned'. (_initialize_dwarf2loc): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * dwarf2loc.h: Update the declaration of 'entry_values_debug'. * dwarf2read.c (dwarf2_die_debug): Add 'unsigned'. (_initialize_dwarf2_read): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * darwin-nat.c (dwarwin_debug_flag): Add 'unsigned'. (_initialize_darwin_inferior): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * frame.c (frame_debug): Add 'unsigned'. (_intialize_frame): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * frame.h: Update the declaration of 'frame_debug'. * gdbtypes.c (overload_debug): Add 'unsigned'. (_initialize_gdbtypes): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * inferior.h: Update declaration of 'debug_infrun'. * infrun.c (debug_infrun): Add 'unsigned'. (_initialize_infrun): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * jit.c (jit_debug): Add 'unsigned'. (_initialize_jit): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * linux-nat.c (debug_linux_nat): Add 'unsigned'. (_initialize_linux_nat): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * linux-thread-db.c (libthread_db_debug): Add 'unsigned'. (_initialize_thread_db): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * machoread.c (mach_o_debug_level): Add 'unsigned'. (_initialize_machoread): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * mi/mi-cmd-var.c: Update the declaration of 'varobjdebug'. * microblaze-tdep.c (microblaze_debug_flag): Add 'unsigned'. (_initialize_microblaze_tdep): Call add_setshow_zuinteger_cmd intead of add_setshow_zinteger_cmd. * mips-tdep.c (mips_debug): Add 'unsigned'. (_initialize_mips_tdep): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * monitor.c (monitor_debug): Add 'unsigned'. (_initialize_remote_monitors): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * observer.c (observer_debug): Add 'unsigned'. (_initialize_observer): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * parse.c (expressiondebug): Add 'unsigned'. (_initialize_parse): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * record.c (record_debug): Add 'unsigned'. (_initialize_record): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * record.h: Update the declaration of 'record_debug'. * stap-probe.c (stap_expression_debug): Add 'unsigned'. (_initialize_stap_probe): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * serial.c (global_serial_debug_p): Add 'unsigned'. (_initialize_serial): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * solib-dsbt.c (solib_dsbt_debug): Add 'unsigned'. (_initialize_dsbt_solib): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * solib-frv.c (solib_frv_debug): Add 'unsigned'. (_initialize_frv_solib): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * target.c (targetdebug): Add 'unsigned'. (initialize_targets): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * valops.c (overload_debug): Add 'unsigned'. * varobj.c (varobjdebug): Add 'unsigned'. (_initialize_varobj): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * xtensa-tdep.c (xtensa_debug_level): Add 'unsigned'. (_initialize_xtensa_tdep): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * arch-utils.h: Remove the declaration of 'gdbarch_debug'. * gdbarch.sh (gdbarch_debug): Add 'unsigned'. (extern void _initialize_gdbarch): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * gdbarch.c, gdbarch.h: Re-generated.	2012-08-02 09:36:40 +00:00
Pedro Alves	09826ec59d	2012-07-20 Pedro Alves <palves@redhat.com> * linux-nat.c (linux_nat_wait): Dump the passed in target options. * target.c (target_wait): Likewise. (str_comma_list_concat_elem, do_option, target_options_to_string): New functions. * target.h (target_options_to_string): Declare.	2012-07-20 16:57:32 +00:00
Marc Khouzam	ae5e0686ee	2012-07-16 Marc Khouzam <marc.khouzam@ericsson.com> Pedro Alves <palves@redhat.com> * linux-nat.c (linux_nat_detach): Don't unregister from the event loop.	2012-07-16 19:07:16 +00:00
Jan Kratochvil	aa7c744796	gdb/ * common/linux-ptrace.c: Include gdb_assert.h. <__i386__> (linux_ptrace_test_ret_to_nx_instr): New declaration. <__i386__>: Include sys/reg.h, sys/mman.h, signal.h, sys/wait.h and stdint.h. (linux_ptrace_test_ret_to_nx, linux_ptrace_init_warnings): New functions. * common/linux-ptrace.h (linux_ptrace_init_warnings): New declarations. * linux-nat.c (linux_child_post_attach) (linux_child_post_startup_inferior): Call linux_ptrace_init_warnings. gdb/gdbserver/ * gdbserver/linux-low.c (initialize_low): Call linux_ptrace_init_warnings.	2012-07-07 12:13:57 +00:00
Jan Kratochvil	da559b09fd	gdb/ * linux-nat.c (resume_lwp, linux_nat_resume): Remove LP->SIGINFO clearing. (save_siginfo): Remove. (stop_wait_callback, linux_nat_filter_event): Remove the save_siginfo call. (resume_stopped_resumed_lwps): Remove LP->SIGINFO clearing. (linux_nat_get_siginfo): Use PTRACE_GETSIGINFO. * linux-nat.h (struct lwp_info): Remove field siginfo.	2012-07-06 16:52:20 +00:00
Jan Kratochvil	f865ee35b7	gdb/ Code cleanup for the next patch. * arm-linux-nat.c (arm_linux_stopped_data_address): Change variable siginfo_p to siginfo, update its users incl. the linux_nat_get_siginfo call for it. * ia64-linux-nat.c (ia64_linux_stopped_data_address): Likewise. (ia64_linux_stopped_data_address): * linux-nat.c (linux_nat_get_siginfo): Add parameter siginfo, change the return value. * linux-nat.h (linux_nat_get_siginfo): Likewise. * ppc-linux-nat.c (ppc_linux_stopped_data_address): Change variable siginfo_p to siginfo, update its users incl. the linux_nat_get_siginfo call for it.	2012-07-06 16:49:43 +00:00
Pedro Alves	e5ef252af0	gdb/ 2012-06-28 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> * gdbthread.h (ALL_THREADS): New macro. (thread_list): Declare. * infrun.c (handle_inferior_event) <spurious signal>: Don't keep going, but instead fall through to the stepping handling. * linux-nat.c (resume_lwp): New parameter 'signo'. Resume with the passed in signal. Adjust debug output. (resume_callback): Rename to ... (linux_nat_resume_callback): ... this. Pass the thread's last stop signal, if in "pass" state. (linux_nat_resume): Adjust to rename. (stop_wait_callback): New assertion. Don't respawn signals; instead let the LWP remain with SIGNALLED set. (linux_nat_wait_1): Remove flushing of pending SIGSTOPs. * remote.c (append_pending_thread_resumptions): New. (remote_vcont_resume): Call it. * target.h (target_resume): Extend comment. gdb/testsuite/ 2012-06-28 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> * gdb.threads/siginfo-threads.exp: New file. * gdb.threads/siginfo-threads.c: New file. * gdb.threads/sigstep-threads.exp: New file. * gdb.threads/sigstep-threads.c: New file.	2012-06-28 16:34:04 +00:00
Pedro Alves	a493e3e2e4	gdb/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. gdb/gdbserver/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. include/gdb/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 * gdb/signals.def: Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/arm/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/avr/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/common/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/cr16/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/d10v/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/erc32/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/m32c/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/ppc/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/rl78/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/rx/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.	2012-05-24 16:51:47 +00:00
Pedro Alves	2ea286498f	gdb/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace target_signal with gdb_signal throughout. gdb/gdbserver/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace target_signal with gdb_signal throughout. include/gdb/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace target_signal with gdb_signal throughout. sim/common/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace target_signal with gdb_signal throughout.	2012-05-24 16:39:15 +00:00
Pedro Alves	dab06dbee5	2012-05-22 Pedro Alves <palves@redhat.com> * target.h (store_waitstatus): Move declaration ... * inf-child.h (store_waitstatus): ... here. * target.c: Move inclusion of gdb_wait.h, and ... (store_waitstatus): ... this ... * inf-child.c: ... here. * linux-nat.c: Include inf-child.h. * rs6000-nat.c: Include inf-child.h. * spu-linux-nat.c: Include inf-child.h.	2012-05-22 15:04:57 +00:00
Yao Qi	42476b702c	gdb/ * common/agent.c (agent_run_command): Add one more parameter `len'. Update callers. * common/agent.h: Update declaration. * linux-nat.c (linux_child_static_tracepoint_markers_by_strid): Update. (linux_child_static_tracepoint_markers_by_strid): Ditto. gdb/gdbserver/ * tracepoint.c (COPY_FIELD_TO_BUF): New macro. (struct tracepoint_action_ops) <send>: New field. (m_tracepoint_action_send, r_tracepoint_action_send): New. (agent_expr_send, x_tracepoint_action_send): New. (l_tracepoint_action_send): New. (cmd_qtdp): Download and install tracepoint according to `use_agent'. (run_inferior_command): Add one more parameter `len'. Update callers. (tracepoint_send_agent): New. (cmd_qtdp, cmd_qtstart): Call tracepoint_send_agent.	2012-04-16 11:24:47 +00:00
Thomas Schwinge	a5362b9aa4	struct siginfo vs. siginfo_t gdb/ * amd64-linux-nat.c (amd64_linux_siginfo_fixup): Use siginfo_t instead of struct siginfo. * arm-linux-nat.c (arm_linux_stopped_data_address): Likewise. * ia64-linux-nat.c (ia64_linux_stopped_data_address): Likewise. * linux-nat.c (linux_nat_siginfo_fixup, siginfo_fixup) (linux_xfer_siginfo, linux_nat_set_siginfo_fixup) (linux_nat_get_siginfo): Likewise. * linux-nat.h (struct lwp_info, linux_nat_set_siginfo_fixup) (linux_nat_get_siginfo): Likewise. * linux-tdep.c (linux_get_siginfo_type): Likewise. * ppc-linux-nat.c (ppc_linux_stopped_data_address): Likewise. * procfs.c (gdb_siginfo_t): Likewise. gdbserver/ * linux-arm-low.c (arm_stopped_by_watchpoint): Use siginfo_t instead of struct siginfo. * linux-low.c (siginfo_fixup, linux_xfer_siginfo): Likewise. * linux-x86-low.c (x86_siginfo_fixup): Likewise. * linux-low.h: Include <signal.h>. (struct siginfo): Remove forward declaration. (struct linux_target_ops) <siginfo_fixup>: Use siginfo_t instead of struct siginfo.	2012-03-21 13:43:55 +00:00
Jan Kratochvil	87b0bb13cb	gdb/ * common/linux-procfs.c (linux_proc_get_int): New, from linux_proc_get_tgid, change its LWPID type to pid_t, add parameter field. (linux_proc_get_tgid): Only call linux_proc_get_int. (linux_proc_get_tracerpid): New. (linux_proc_pid_has_state): New, from linux_proc_pid_is_zombie. (linux_proc_pid_is_stopped, linux_proc_pid_is_zombie): Only call linux_proc_pid_has_state. * common/linux-procfs.h (linux_proc_get_tracerpid): New declaration. * common/linux-ptrace.c: Include linux-procfs.h and buffer.h. (linux_ptrace_attach_warnings): New. * common/linux-ptrace.h (struct buffer, linux_ptrace_attach_warnings): New declaration. * linux-nat.c: Include exceptions.h, linux-ptrace.h and buffer.h. (linux_nat_attach): New variables ex, buffer, message and message_s. Wrap to_attach by TRY_CATCH and call linux_ptrace_attach_warnings. gdb/gdbserver/ * linux-low.c (linux_attach_lwp_1): New variable buffer. Call linux_ptrace_attach_warnings. gdb/testsuite/ * gdb.base/attach-twice.c: New files. * gdb.base/attach-twice.exp: New files.	2012-03-13 15:02:25 +00:00
Jan Kratochvil	5f572decf9	gdb/ * Makefile.in (linux-ptrace.o): New. * common/linux-procfs.c (linux_proc_pid_is_zombie): New, from linux-nat.c. * common/linux-procfs.h (linux_proc_pid_is_zombie): New declaration. * common/linux-ptrace.c: New file. * config/alpha/alpha-linux.mh (NATDEPFILES): Add linux-ptrace.o. * config/arm/linux.mh: Likewise. * config/i386/linux.mh: Likewise. * config/i386/linux64.mh: Likewise. * config/ia64/linux.mh: Likewise. * config/m32r/linux.mh: Likewise. * config/m68k/linux.mh: Likewise. * config/mips/linux.mh: Likewise. * config/pa/linux.mh: Likewise. * config/powerpc/linux.mh: Likewise. * config/powerpc/ppc64-linux.mh: Likewise. * config/powerpc/spu-linux.mh: Likewise. * config/s390/s390.mh: Likewise. * config/sparc/linux.mh: Likewise. * config/sparc/linux64.mh: Likewise. * config/xtensa/linux.mh: Likewise. * linux-nat.c (linux_lwp_is_zombie): Remove, move it to common/linux-procfs.c. (wait_lwp): Rename linux_lwp_is_zombie to linux_proc_pid_is_zombie. gdb/gdbserver/ * Makefile.in (linux-ptrace.o): New. * configure.srv (arm--linux, bfin--linux, crisv32--linux) (cris--linux, i[34567]86--linux, ia64--linux, m32r--linux) (m68--linux, m68--uclinux, mips--linux, powerpc--linux) (s390--linux, sh--linux, sparc--linux, tic6x--uclinux) (x86_64--linux, xtensa--linux): Add linux-ptrace.o to SRV_TGTOBJ of these targets. * linux-low.c (linux_attach_lwp_1): Remove redundent else clause.	2012-03-13 15:00:37 +00:00
Jan Kratochvil	2e7941949d	gdb/ Code cleanup. * common/linux-osdata.c (linux_common_core_of_thread): New function comment. * linux-nat.c (linux_nat_wait_1): Replace linux_nat_core_of_thread_1 call by linux_common_core_of_thread. (linux_nat_core_of_thread_1): Remove. * linux-nat.h (linux_nat_core_of_thread_1): Remove declaration. * linux-thread-db.c: Include linux-osdata.h. (update_thread_core): Replace linux_nat_core_of_thread_1 call by linux_common_core_of_thread.	2012-03-05 21:07:46 +00:00
Yao Qi	5808517f9a	gdb: * common/agent.c (agent_look_up_symbols): Add one parameter 'arg'. * common/agent.h: Update declaration. * inf-child.c (inf_child_use_agent): New. (inf_child_can_use_agent): New. (inf_child_target): Initialize fields `to_use_agent' and `to_can_use_agent'. * agent.c (agent_new_objfile): New. (_initialize_agent): Add agent_new_objfile to new_objfile observer. * linux-nat.c (linux_child_static_tracepoint_markers_by_strid): New. (linux_target_install_ops): Initialize field `to_static_tracepoint_markers_by_strid'. * remote.c (free_current_marker): Move it to ... * tracepoint.c (free_current_marker): ... here. New. (cleanup_target_stop): New. * tracepoint.h: Declare free_current_marker. * NEWS: Add one entry about `info static-tracepoint-marker'. gdb/gdbserver: * tracepoint.c (tracepoint_look_up_symbols): Update call to agent_look_up_symbols. gdb/testsuite: * gdb.trace/strace.exp: run strace_info_marker in linux native gdb.	2012-03-03 09:51:29 +00:00
Pedro Alves	70221824e3	2012-03-01 Pedro Alves <palves@redhat.com> * amd64-linux-tdep.c (amd64_linux_record_signal): Make static. * breakpoint.c (create_exception_master_breakpoint, trace_command) (ftrace_command, strace_command): Make static. * d-lang.c (_initialize_d_language): Declare. * dwarf2expr.c (_initialize_dwarf2expr): Declare. * dwarf2loc.c (_initialize_dwarf2loc): * dwarf2read.c (process_psymtab_comp_unit): Make static. * exec.c (exec_get_section_table): Make static. * i386-linux-tdep.c (i386_linux_record_signal): Make static. * infcmd.c (ensure_valid_thread, ensure_not_tfind_mode): Make static. * inferior.c (remove_inferior_command, add_inferior_command) (clone_inferior_command): Make static. * linux-nat.c (linux_nat_thread_address_space) (linux_nat_core_of_thread): Make static. * linux-tdep.c (_initialize_linux_tdep): Declare. * objc-lang.c (_initialize_objc_lang): Declare. * opencl-lang.c (builtin_opencl_type, opencl_language_arch_info): Make static. (_initialize_opencl_language): Declare. * record.c (_initialize_record): Declare. * remote.c (demand_private_info, remote_get_tib_address) (remote_supports_cond_tracepoints) (remote_supports_fast_tracepoints, remote_get_tracepoint_status): Make static. * skip.c (_initialize_step_skip): Declare. * symtab.c (skip_prologue_using_lineinfo): Make static. * tracepoint.c (delete_trace_state_variable) (trace_variable_command, delete_trace_variable_command) (get_uploaded_tsv, find_matching_tracepoint_location) (find_matching_tsv, create_tsv_from_upload, get_traceframe_info): Make static. * value.c (pack_unsigned_long): Make static. * varobj.c (varobj_ensure_python_env): Make static. * windows-tdep.c (_initialize_windows_tdep): Declare. * xml-syscall.c (make_cleanup_free_syscalls_info): Make static.	2012-03-01 21:14:00 +00:00
Pedro Alves	644cebc98c	2012-02-27 Pedro Alves <palves@redhat.com> gdb/gdbserver/ * linux-low.c (pid_is_stopped): Delete, moved to common/. (linux_attach_lwp_1): Adjust to use linux_proc_pid_is_stopped. gdb/ * linux-nat.c (pid_is_stopped): Delete, moved to common/. (linux_nat_post_attach_wait): Adjust to use linux_proc_pid_is_stopped. * common/linux-procfs.h (linux_proc_pid_is_stopped): Declare. * common/linux-procfs.c (linux_proc_pid_is_stopped): New function, based on pid_is_stopped from both linux-nat.c and gdbserver/linux-low.c, and renamed.	2012-02-27 16:22:16 +00:00
Tom Tromey	7dcd53a074	* symfile.c (symbol_file_add_main_1): Use inferior's symfile_flags. * solib.c (solib_read_symbols): Use inferior's symfile_flags. * linux-nat.c (linux_child_follow_fork): Set symfile_flags on inferior. * infrun.c (handle_vfork_child_exec_or_exit): Set symfile_flags on inferior. (follow_exec): Use inferior's symfile_flags. * inferior.h (struct inferior) <symfile_flags>: New field.	2012-02-16 21:07:20 +00:00
Jan Kratochvil	4403d8e9b3	gdb/ Fix watchpoints across inferior fork. * amd64-linux-nat.c (update_debug_registers_callback): Update the comment for linux_nat_iterate_watchpoint_lwps. (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use linux_nat_iterate_watchpoint_lwps. (amd64_linux_prepare_to_resume): New comment on Linux kernel. * i386-linux-nat.c (update_debug_registers_callback): Update the comment for linux_nat_iterate_watchpoint_lwps. (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use linux_nat_iterate_watchpoint_lwps. (i386_linux_prepare_to_resume): New comment on Linux kernel. * i386-nat.c: Include inferior.h. (dr_mirror): Remove. (i386_inferior_data, struct i386_inferior_data) (i386_inferior_data_get): New. (i386_debug_reg_state): Use i386_inferior_data_get. (i386_cleanup_dregs, i386_update_inferior_debug_regs) (i386_insert_watchpoint, i386_remove_watchpoint) (i386_stopped_data_address, i386_insert_hw_breakpoint) (i386_remove_hw_breakpoint): New variable state, use i386_debug_reg_state instead of DR_MIRROR. * linux-nat.c (delete_lwp): New declaration. (num_lwps): Move here from downwards. (delete_lwp_cleanup): New. (linux_child_follow_fork): Create new child_lp, call linux_nat_new_thread and linux_nat_prepare_to_resume before calling PTRACE_DETACH. (num_lwps): Move upwards. (linux_nat_iterate_watchpoint_lwps): New. * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): New. (linux_nat_iterate_watchpoint_lwps_ftype): New declaration. gdb/testsuite/ Fix watchpoints across inferior fork. * gdb.threads/watchpoint-fork-child.c: New file. * gdb.threads/watchpoint-fork-mt.c: New file. * gdb.threads/watchpoint-fork-parent.c: New file. * gdb.threads/watchpoint-fork-st.c: New file. * gdb.threads/watchpoint-fork.exp: New file. * gdb.threads/watchpoint-fork.h: New file.	2012-01-24 13:46:55 +00:00
Ulrich Weigand	35c2fab7c6	* gdbarch.sh (find_memory_regions): New callback. * gdbarch.c, gdbarch.h: Regenerate. * gcore.c (gcore_memory_sections): Try gdbarch find_memory_regions callback before falling back to target method. * linux-nat.c (read_mapping, linux_nat_find_memory_regions): Remove. (linux_target_install_ops): No longer install it. * linux-tdep.c (linux_find_memory_regions): New function. (linux_init_abi): Install it.	2012-01-20 09:59:15 +00:00
Ulrich Weigand	6432734d1d	* gdbarch.sh (make_corefile_notes): New architecture callback. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * gcore.c (write_gcore_file): Try gdbarch_make_corefile_notes before target_make_corefile_notes. If NULL is returned, the target does not support core file generation. * linux-nat.c: Include "linux-tdep.h". (find_signalled_thread, find_stop_signal): Remove. (linux_nat_do_thread_registers): Likewise. (struct linux_nat_corefile_thread_data): Likewise. (linux_nat_corefile_thread_callback): Likewise. (iterate_over_spus): Likewise. (struct linux_spu_corefile_data): Likewise. (linux_spu_corefile_callback): Likewise. (linux_spu_make_corefile_notes): Likewise. (linux_nat_collect_thread_registers): New function. (linux_nat_make_corefile_notes): Replace contents by call to linux_make_corefile_notes passing linux_nat_collect_thread_registers as native-only callback. * linux-tdep.h: Include "bfd.h". (struct regcache): Add forward declaration. (linux_collect_thread_registers_ftype): New typedef. (linux_make_corefile_notes): Add prototype. * linux-tdep.c: Include "gdbthread.h", "gdbcore.h", "regcache.h", "regset.h", and "elf-bfd.h". (find_signalled_thread, find_stop_signal): New functions. (linux_spu_make_corefile_notes): Likewise. (linux_collect_thread_registers): Likewise. (struct linux_corefile_thread_data): New data structure. (linux_corefile_thread_callback): New funcion. (linux_make_corefile_notes): Likewise. (linux_make_corefile_notes_1): Likewise. (linux_init_abi): Install it.	2012-01-20 09:56:56 +00:00
Ulrich Weigand	3030c96e66	* gdbarch.sh (info_proc): New callback. * gdbarch.c, gdbarch.h: Regenerate. * infcmd.c (info_proc_cmd_1): Try gdbarch info_proc callback before falling back to the target info_proc callback. * linux-nat.c: Do not include "cli/cli-utils.h". (linux_nat_info_proc): Remove. (linux_target_install_ops): No longer install it. * linux-tdep.c: Include "cli/cli-utils.h" and <ctype.h>. (read_mapping): New function. (linux_info_proc): Likewise. (linux_init_abi): Install it.	2012-01-20 09:49:58 +00:00
Ulrich Weigand	145b16a97a	ChangeLog: * defs.h (enum info_proc_what): Moved here from linux-nat.c * infcmd.c: (info_proc_cmd_1): New function. (info_proc_cmd): New function, moved here from equivalent routine orignally in linux-nat.c. (info_proc_cmd_mappings): Likewise. (info_proc_cmd_stat): Likewise. (info_proc_cmd_status): Likewise. (info_proc_cmd_cwd): Likewise. (info_proc_cmd_cmdline): Likewise. (info_proc_cmd_exe): Likewise. (info_proc_cmd_all): Likewise. (_initialize_infcmd): Install "info proc" command and subcommands. * target.h (struct target_ops): Add to_info_proc. (target_info_proc): Add prototype. * target.c (target_info_proc): New function. * procfs.c (procfs_info_proc): Add prototype. (info_proc_cmd): Rename into ... (procfs_info_proc): ... this. Update argument types as appropriate for a to_info_proc implementation. Handle "what" argument. (procfs_target): Install procfs_info_proc. (_initialize_procfs): No longer install "info proc" command. * linux-nat.c: (enum info_proc_what): Remove. (linux_nat_info_proc_cmd_1): Rename into ... (linux_nat_info_proc): ... this. Update argument types as appropriate for a to_info_proc implementation. (linux_nat_info_proc_cmd): Remove. (linux_nat_info_proc_cmd_mappings): Likewise. (linux_nat_info_proc_cmd_stat): Likewise. (linux_nat_info_proc_cmd_status): Likewise. (linux_nat_info_proc_cmd_cwd): Likewise. (linux_nat_info_proc_cmd_cmdline): Likewise. (linux_nat_info_proc_cmd_exe): Likewise. (linux_nat_info_proc_cmd_all): Likewise. (linux_target_install_ops): Install linux_nat_info_proc. (_initialize_linux_nat): No longer install "info proc" command and subcommands. testsuite/ChangeLog: * gdb.base/info-proc.exp: Also run on remote targets. Main "info proc" command is now always present; whether target supports actual info proc operation is detected when attempting to issue the command.	2012-01-20 09:49:01 +00:00
Pedro Alves	305436e07a	2012-01-19 Pedro Alves <palves@redhat.com> * linux-nat.c (linux_nat_close): Call linux_nat_is_async_p and linux_nat_async directly instead of going through the target vector. * target.c (unpush_target): Close target after unpushing it, not before.	2012-01-19 16:32:59 +00:00

1 2 3 4 5 ...

282 Commits