2015-07-07 Han Shen <shenhan@google.com>
gold/ChangeLog:
2015-07-06 Han Shen <shenhan@google.com>
* aarch64.cc (AArch64_relobj::do_count_local_symbols): Make legal
of mapping symbols.
Some tests expect the the target is aarch64, but checking target
triplet is not accurate, because target triplet can be aarch64 but
the program is in arm (or aarch32) state.
This patch addes a new proc is_aarch64_target which returns true
if the target is on aarch64 state.
gdb/testsuite:
2015-07-07 Yao Qi <yao.qi@linaro.org>
* gdb.arch/aarch64-atomic-inst.exp: Check is_aarch64_target
instead of istarget "aarch64*-*-*".
* gdb.arch/aarch64-fp.exp: Likewise.
* gdb.base/float.exp: Likewise.
* gdb.reverse/aarch64.exp: Likewise.
* lib/gdb.exp (is_aarch64_target): New proc.
GDB tests running on arm target should be also run on aarch32
(32-bit mode on aarch64). There should be no difference. It is not
precise to check target triplet to decide which tests should be run,
because if I compiler all the test binary in 32-bit (arm program),
but target triplet is still aarch64, so that these arm specific tests
are skipped.
This patch is to add a new proc is_aarch32_target which return true
if target triplet is arm or the test binary is compiled for arm.
gdb/testsuite:
2015-07-07 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (is_aarch32_target): New proc.
* gdb.arch/arm-bl-branch-dest.exp: Check is_aarch32_target
instead of "istarget "arm*-*-*"".
* gdb.arch/arm-disp-step.exp: Likewise.
* gdb.arch/thumb-bx-pc.exp: Likewise.
* gdb.arch/thumb-prologue.exp: Likewise.
* gdb.arch/thumb-singlestep.exp: Likewise.
* gdb.base/disp-step-syscall.exp: Likewise.
* gdb.base/float.exp: Likewise.
This patch is to enable test_catch_syscall_multi_arch on aarch64.
gdb/testsuite:
2015-07-07 Yao Qi <yao.qi@linaro.org>
* gdb.base/catch-syscall.exp (test_catch_syscall_multi_arch):
Set arch1, arch2, syscall1_name, syscall2_name and syscall_number.
Multi-arch related tests under gdb.multi are to compile programs with
the same compiler but different compiler options (-m64 vs -m32). However,
different compilers are needed to compile both aarch64 program and
arm (aarch32) program. This patch is to adjust these test cases to
compile programs in different modes with different compiler.
When we use gcc for arm-linux target, its file name can be different,
arm-linux-gnueabihf-gcc, arm-linux-gnueabi-gcc, or arm-none-linux-gnueabi-gcc,
so I add a variable ARM_CC_FOR_TARGET, so that user can set the name
of gcc for arm-linux target on aarch64, like:
$ make check RUNTESTFLAGS='ARM_CC_FOR_TARGET=arm-linux-gnueabihf-gcc multi-arch.exp'
gdb/testsuite:
2015-07-07 Yao Qi <yao.qi@linaro.org>
* gdb.multi/multi-arch-exec.exp: Set march1 and march2 to "" if target
is aarch64. If target is aarch64, set compiler=${ARM_CC_FOR_TARGET}
if it exists.
* gdb.multi/multi-arch.exp: Likewise.
This patch is to add the following line to various arm target description
xml files,
<architecture>arm</architecture>
in order to fix problems I've seen on aarch64 multi-arch debugging,
detach^M
Detaching from program: build-gdb/gdb/testsuite/gdb.base/attach, process 17145^M
(gdb) PASS: gdb.base/attach.exp: attach1 detach file^M
No executable file now.^M
Architecture of file not recognized.^M
(gdb) FAIL: gdb.base/attach.exp: attach1, purging symbols after detach
Without this patch, struct target_desc *tdesc_* are not initialised
properly, that is, fields arch and osabi in 'struct target_desc' are
not set properly. This doesn't cause any problems on single arch
debugging, because arch-utils.c:gdbarch_info_fill will guess correctly.
However, in multi-arch debugging, gdbarch_info_fill gets the aarch64
arch, but the target description is for arm (because the current
inferior is 32-bit arm).
It is a surprise to me we didn't set architecture to "arm" before in *.xml
files, and I didn't find out why didn't do so. AFAICS,
gdb/features/arm-with-iwmmxt.xml was added firstly (in patch
https://sourceware.org/ml/gdb-patches/2007-01/msg00593.html)
which had <architecture>iwmmxt</architecture>, however, afterwards,
architecture isn't set anymore in features/arm-*.xml files (in patches
https://sourceware.org/ml/gdb-patches/2009-07/msg00689.html and
https://sourceware.org/ml/gdb-patches/2010-08/msg00225.html).
gdb:
2015-07-07 Yao Qi <yao.qi@linaro.org>
* features/arm-with-m-fpa-layout.xml: Set architecture to arm.
* features/arm-with-m-fpa-layout.c: Regenerated.
* features/arm-with-m-vfp-d16.xml: Likewise.
* features/arm-with-m-vfp-d16.c: Regenerated.
* features/arm-with-m.xml: Likewise.
* features/arm-with-m.c: Regenerated.
* features/arm-with-neon.xml: Likewise.
* features/arm-with-neon.c: Regenerated.
* features/arm-with-vfpv2.xml: Likewise.
* features/arm-with-vfpv2.c: Regenerated.
* features/arm-with-vfpv3.xml: Likewise.
* features/arm-with-vfpv3.c: Regenerated.
This patch is to let aarch64 GDB debug 32-bit arm program natively. In
each function for fetching and storing registers, GDB will check
gdbarch_bfd_arch_info (gdbarch)->bits_per_word, if it is 32, call
the corresponding aarch32 functions in aarch32-linux-nat.c, otherwise
fall back to aarch64 code to fetch and store registers.
aarch64_linux_read_description has to return the right target description,
but we don't have gdbarch available there, so GDB fetches auxv and gets
AT_PHENT, in order to determine whether the target is 32-bit or 64-bit.
I learned this trick from solib-svr4.c.
gdb:
2015-07-07 Yao Qi <yao.qi@linaro.org>
* aarch32-linux-nat.h (VFP_REGS_SIZE): New macro, moved from
arm-linux-nat.c.
* aarch64-linux-nat.c: Include aarch32-linux-nat.h and
elf/external.h.
(fetch_gregs_from_thread): Call aarch32_gp_regcache_supply
if target is 32-bit.
(store_gregs_to_thread): Call aarch32_gp_regcache_collect
if target is 32-bit.
(fetch_fpregs_from_thread): Call aarch32_vfp_regcache_supply
if target is 32-bit.
(store_fpregs_to_thread): Call aarch32_vfp_regcache_collect
if target is 32-bit.
(tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare.
(aarch64_linux_read_description): Return the right target
description.
* arm-linux-nat.c (VFP_REGS_SIZE): Moved to aarch32-linux-nat.h.
* config/aarch64/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
* configure.tgt (aarch64*-*-linux*): Add arm-tdep.o and
arm-linux-tdep.o
This patch is to move all the code about transferring
regcache <-> byte buffer for arm (aarch32) to a separate file
aarch32-linux-nat.c. Then, in the following patch, aarch64 code
can use it to do multi-arch debugging. This is a refactory patch.
gdb:
2015-07-07 Yao Qi <yao.qi@linaro.org>
* aarch32-linux-nat.c: New file.
* aarch32-linux-nat.h: New file.
* arm-linux-nat.c: Include aarch32-linux-nat.h.
(fetch_regs): Move code to aarch32-linux-nat.c. Call
aarch32_gp_regcache_supply.
(store_regs): Move code to aarch32-linux-nat.c. Call
aarch32_gp_regcache_collect.
(fetch_vfp_regs): Move code to aarch32-linux-nat.c. Call
aarch32_vfp_regcache_supply.
(store_vfp_regs): Move code to aarch32-linux-nat.c. Call
aarch32_vfp_regcache_collect.
* config/arm/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
This patch is to remove fetch_fpregister, fech_register,
store_fpregister and store_register, and use fetch_fpregs,
fetch_regs, store_regs, and store_fpregs instead.
gdb:
2015-07-07 Yao Qi <yao.qi@linaro.org>
* arm-linux-nat.c (store_fpregister): Remove.
(store_register): Likewise.
(fetch_fpregister): Likewise.
(fetch_register): Likewise.
(arm_linux_store_inferior_registers): Call store_regs and
store_fpregs instead.
(arm_linux_fetch_inferior_registers): Call fetch_fpregs and
fetch_regs instead.
Patch "Do not skip prologue for asm (.S) files" [1] changes GDB's
behaviour on which test gdb.arch/thumb-singlestep.exp depends, so
it causes the fail below:
(gdb) si^M
37 blx foo^M
(gdb) FAIL: gdb.arch/thumb-singlestep.exp: step into foo
the test assumes the program will stop at the instruction after "push"
but it doesn't. The fix to this fail is to do one more single step.
[1] https://sourceware.org/ml/gdb-patches/2015-06/msg00561.html
gdb/testsuite:
2015-07-07 Yao Qi <yao.qi@linaro.org>
* gdb.arch/thumb-singlestep.exp: Do one more single step.
Changes the documentation for the layout and focus commands.
Instead of documenting each layout (or focus) sub-command as a separate
command, document a single layout (and focus) command which takes a
parameter, then list the possible parameters in a table nested under
each command.
The documentation for the layout command has been extended little to
make it clearer which windows are shown in each layout.
gdb/ChangeLog:
* doc/gdb.texinfo (TUI): Restructure documentation on TUI layout
and focus commands.
Now that the GDB 7.10 branch has been created, we can
bump the version number.
gdb/ChangeLog:
GDB 7.10 branch created (66c4b3e8a6):
* version.in: Bump version to 7.10.50.DATE-cvs.
This fixes regressions introduced with the original change to not
consider permanent breakpoints always inserted:
6ae8866180 is the first bad commit
commit 6ae8866180
Author: Luis Machado <lgustavo@codesourcery.com>
Date: Wed Jun 17 16:50:57 2015 -0300
Fix problems with finishing a dummy function call on simulators.
Some checks were mistakenly left out of the original patch, which
caused the following failures:
-PASS: gdb.base/shlib-call.exp: print mainshr1(1)
-PASS: gdb.base/shlib-call.exp: step into mainshr1
+FAIL: gdb.base/shlib-call.exp: print mainshr1(1)
+FAIL: gdb.base/shlib-call.exp: step into mainshr1
-PASS: gdb.cp/chained-calls.exp: q(p())
+FAIL: gdb.cp/chained-calls.exp: q(p())
-PASS: gdb.cp/chained-calls.exp: q(p() + r())
+FAIL: gdb.cp/chained-calls.exp: q(p() + r())
-PASS: gdb.cp/chained-calls.exp: g(f(g(f() + f())) + f())
+FAIL: gdb.cp/chained-calls.exp: g(f(g(f() + f())) + f())
-PASS: gdb.cp/chained-calls.exp: *c
-PASS: gdb.cp/chained-calls.exp: *c + *c
-PASS: gdb.cp/chained-calls.exp: q(*c + *c)
+FAIL: gdb.cp/chained-calls.exp: *c
+FAIL: gdb.cp/chained-calls.exp: *c + *c
+FAIL: gdb.cp/chained-calls.exp: q(*c + *c)
-PASS: gdb.cp/classes.exp: calling method for small class
+FAIL: gdb.cp/classes.exp: calling method for small class
The above is likely caused by GDB not removing the permanent
breakpoints from the target, leading to the inferior executing
the breakpoint instruction and tripping on a SIGSEGV.
gdb/ChangeLog:
2015-07-06 Luis Machado <lgustavo@codesourcery.com>
* breakpoint.c (remove_breakpoint_1): Don't handle permanent
breakpoints in a special way.
(remove_breakpoint): Likewise.
(mark_breakpoints_out): Likewise.
All uses of @xref must be followed by either '.' or ','. In commit
a4ea0946c an incorrect use of @xref was introduced. This commit
adds a comma after the use of @xref.
gdb/ChangeLog:
* doc/gdb.texinfo (TUI): Add comma after @xref.
Instead of casting between structure types to get the 'tui_gen_win_info'
info from a 'tui_win_info' access the generic member variable. This is
inline with what is done throughout the rest of the tui code.
gdb/ChangeLog:
* tui/tui-win.c (tui_set_focus): Use structure member 'generic'
instead of casting the structure type.
I was trying to understand what the OFFSET parameter was for, and
realized it was set to 0 in every call to search_struct_field. I
assume that it was used at some point, but some subsequent changes
made it useless.
gdb/ChangeLog:
* valops.c (search_struct_field): Remove OFFSET parameter.
(value_cast_structs): Adjust calls to search_struct_field.
(value_struct_elt): Same.
(find_overload_match): Same.
The comment for value_fetch_lazy seems outdated. It says that it's only
called from the value_contents and value_contents_all (macros!), which
is not true. Also, the return value seems useless now, despite what the
comment says.
gdb/ChangeLog:
* value.c (value_fetch_lazy): Update comment, change return
value to void.
* value.h (value_fetch_lazy): Change return value to void.
This commit makes the parameter and the result for 'tui_win_name'
constant. There's one place in the code that is then updated as a
result of this change.
gdb/ChangeLog:
* tui/tui-data.c (tui_partial_win_by_name): Window name is const.
(tui_win_name): Make parameter and result const.
* tui/tui-data.h (tui_win_name): Make parameter and result const.
"show" functions should not throw an exception in part because it causes
the output of the commands "info set" and "show" to get truncated.
This fixes the following fails:
FAIL: gdb.base/default.exp: info set
FAIL: gdb.base/default.exp: show
gdb/ChangeLog:
* i386-tdep.c (i386_mpx_info_bounds): Don't call error, instead
use printf_unfiltered.
(set_mpx_cmd): Add missing trailing space to command string
literal.
(_initialize_i386_tdep): Give the "mpx" prefix command its
correct name.
bfd/
* elf64-ppc.c (toc_adjusting_stub_needed): Use the symbol value
plus addend rather than the original st_value when looking up
entries in opd->adjust.
ld/testsuite/
* ld-powerpc/tocopt6-inc.s, ld-powerpc/tocopt6a.s,
ld-powerpc/tocopt6b.s, ld-powerpc/tocopt6c.s,
ld-powerpc/tocopt6.d: New test.
* ld-powerpc/powerpc.exp (ppc64elftests): Add it.
Back in the day support for these processors was added, we probably
didn't want to waste PPC_OPCODE bits on minor variations. I've had a
complaint that disassembly of mfspr/mtspr was wrong for power8. This
patch fixes that problem.
Note that since -m860/-m850/-m821 are new gas options enabling the
mpc8xx specific mfspr/mtspr variants it is possible that this change
will break some mpc8xx assembly code. ie. you might need to modify
makefiles to pass -m860 to gas.
include/opcode/
* ppc.h (PPC_OPCODE_750, PPC_OPCODE_7450, PPC_OPCODE_860): Define.
opcodes/
* ppc-opc.c (PPC750, PPC7450, PPC860): Define using PPC_OPCODE_*.
* ppc-dis.c (ppc_opts): Add 821, 850 and 860 entries. Add
PPC_OPCODE_7450 to 7450 entry. Add PPC_OPCODE_750 to 750cl entry.
gas/
* config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
gas/testsuite/
* gas/ppc/titan.d: Correct mfmcsrr0 disassembly.
This change adds support for backtracing through Renesas RX exception
frames.
Determination about the type of frame is made by scanning the
remainder of the function for a return instruction and then looking at
which, if any, return instruction is found. A normal RTS instruction
indicates that the frame is a normal frame. An RTFI instruction
indicates that it's a fast interrupt, and an RTE instruction indicates
that the frame is a (normal) exception frame. If no return instruction
is found within the scanned region - which can happen when the end of
the function cannot be found - it is assumed to be a normal frame.
I was able to test that normal prologue scanning still works by
disabling the dwarf2 sniffer. I've tested this code for normal
interrupts. The fast interrupt case has not been tested.
gdb/ChangeLog:
* rx-tdep.c (RX_USP_REGNUM, RX_BPC_REGNUM): New constants.
(enum rx_frame_type): New.
(struct rx_prologue): Add new field `frame_type'.
(rx_analyze_prologue): Add `frame_type' parameter. Cache this
parameter in the prologue struct. Add code for recording
locations of PC and PSW for fast interrupt and exception frames.
(rx_skip_prologue): Adjust call to rx_analyze_prologue.
(rx_analyze_frame_prologue): Add `frame_type' parameter.
(rx_frame_type): New function.
(rx_frame_base): Fetch frame type and pass it to rx_analyze_prologue.
(rx_frame_this_id): Rename parameter `this_prologue_cache' to
`this_cache'.
(rx_frame_prev_register): Rename parameter `this_prologue_cache' to
`this_cache'. Add cases for RX_FRAME_TYPE_EXCEPTION and
RX_FRAME_TYPE_FAST_INTERRUPT.
(normal_frame_p, exception_frame_p, rx_frame_sniffer_common)
(rx_frame_sniffer, rx_exception_sniffer): New functions.
(rx_frame_unwind): Use rx_frame_sniffer instead of
default_frame_sniffer.
(rx_frame_unwind): New unwinder.
(rx_gdbarch_init): Register new unwinder.
This change adds two flags types for the (Renesas RX) psw, bpsw, and
fpsw registers. As a result, symbolic flags are displayed for these
registers in the output of GDB's "info registers" command as well as
in output from other commands, such as "print".
gdb/ChangeLog:
* rx-tdep.c (RX_BPSW_REGNUM, RX_FPSW_REGNUM): New constants.
(struct gdbarch_tdep): Add fields rx_psw_type and rx_fpsw_type.
(rx_register_type): Add cases for RX_PSW_REGNUM, RX_BPSW_REGNUM,
and RX_FPSW_REGNUM.
(rx_gdbarch_init): Initialize PSW, BPSW, and FPSW flags types.
At least on
gcc-4.4.7-11.el6.i686
./configure --enable-64-bit-bfd --enable-targets=all
GDB does not build due to:
cc1: warnings being treated as errors
s390-linux-tdep.c: In function ‘s390_handle_arg’:
s390-linux-tdep.c:2575: error: ‘val’ may be used uninitialized in this function
gdb/ChangeLog
2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix GCC false warning.
* s390-linux-tdep.c (s390_handle_arg): Initialize VAL.
It should be "insert_hw_breakpoint" rather than "insert_hw_watchpoint".
gdb:
2015-07-02 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Fix
typo in the debugging message.
Add maintenance commands that help debugging the btrace record target.
The following new commands are added:
maint info btrace
Print information about branch tracing internals.
maint btrace packet-history
Print the raw branch tracing data.
maint btrace clear-packet-history
Discard the stored raw branch tracing data.
maint btrace clear
Discard all branch tracing data. It will be fetched and processed
anew by the next "record" command.
maint set|show btrace pt skip-pad
Set and show whether PAD packets are skipped when computing the
packet history.
gdb/
* btrace.c: Include gdbcmd.h, cli/cli-utils.h, and ctype.h.
(maint_btrace_cmdlist, maint_btrace_set_cmdlist)
(maint_btrace_show_cmdlist, maint_btrace_pt_set_cmdlist)
(maint_btrace_pt_show_cmdlist, maint_btrace_pt_skip_pad)
(btrace_maint_clear): New.
(btrace_fetch, btrace_clear): Call btrace_maint_clear.
(pt_print_packet, btrace_maint_decode_pt)
(btrace_maint_update_pt_packets, btrace_maint_update_packets)
(btrace_maint_print_packets, get_uint, get_context_size, no_chunk)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd, maint_btrace_clear_cmd)
(maint_btrace_cmd, maint_btrace_set_cmd, maint_btrace_show_cmd)
(maint_btrace_pt_set_cmd, maint_btrace_pt_show_cmd)
(maint_info_btrace_cmd, _initialize_btrace): New.
* btrace.h (btrace_pt_packet, btrace_pt_packet_s)
(btrace_maint_packet_history, btrace_maint_info): New.
(btrace_thread_info) <maint>: New.
* NEWS: Announce it.
doc/
* gdb.texinfo (Maintenance Commands): Document "maint btrace"
commands.
Store the raw branch trace data that has been read from the target.
This data can be used for maintenance commands as well as for generating
a core file for the "record save" command.
gdb/
* btrace.c (btrace_fetch): Append the new trace data.
(btrace_clear): Clear the stored trace data.
* btrace.h (btrace_thread_info) <data>: New.
* common/btrace-common.h (btrace_data_clear)
(btrace_data_append): New.
* common/btrace-common.c (btrace_data_clear)
(btrace_data_append): New.
In struct perf_event_mmap_page there are new fields data_size and data_offset
that give the location of the perf_event data buffer relative to the mmap
page. Use them if they are present.
gdb/
* nat/linux-btrace.c (linux_enable_bts): Check for
PERF_ATTR_SIZE_VER5.
Check for data_offset and data_size fields. Use them.
Adds a new command "record btrace pt" to configure the kernel to use
Intel(R) Processor Trace instead of Branch Trace Strore.
The "record btrace" command chooses the tracing format automatically.
Intel(R) Processor Trace support requires Linux 4.1 and libipt.
gdb/
* NEWS: Announce new commands "record btrace pt" and "record pt".
Announce new options "set|show record btrace pt buffer-size".
* btrace.c: Include "rsp-low.h".
Include "inttypes.h".
(btrace_add_pc): Add forward declaration.
(pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback)
(pt_translate_cpu_vendor, btrace_finalize_ftrace_pt)
(btrace_compute_ftrace_pt): New.
(btrace_compute_ftrace): Support BTRACE_FORMAT_PT.
(check_xml_btrace_version): Update version check.
(parse_xml_raw, parse_xml_btrace_pt_config_cpu)
(parse_xml_btrace_pt_raw, parse_xml_btrace_pt)
(btrace_pt_config_cpu_attributes, btrace_pt_config_children)
(btrace_pt_children): New.
(btrace_children): Add support for "pt".
(parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New.
(btrace_conf_children): Add support for "pt".
* btrace.h: Include "intel-pt.h".
(btrace_pt_error): New.
* common/btrace-common.c (btrace_format_string, btrace_data_fini)
(btrace_data_empty): Support BTRACE_FORMAT_PT.
* common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT.
(struct btrace_config_pt): New.
(struct btrace_config)<pt>: New.
(struct btrace_data_pt_config, struct btrace_data_pt): New.
(struct btrace_data)<pt>: New.
* features/btrace-conf.dtd (btrace-conf)<pt>: New.
(pt): New.
* features/btrace.dtd (btrace)<pt>: New.
(pt, pt-config, cpu): New.
* nat/linux-btrace.c (perf_event_read, perf_event_read_all)
(perf_event_pt_event_type, kernel_supports_pt)
(linux_supports_pt): New.
(linux_supports_btrace): Support BTRACE_FORMAT_PT.
(linux_enable_bts): Free tinfo on error.
(linux_enable_pt): New.
(linux_enable_btrace): Support BTRACE_FORMAT_PT.
(linux_disable_pt): New.
(linux_disable_btrace): Support BTRACE_FORMAT_PT.
(linux_fill_btrace_pt_config, linux_read_pt): New.
(linux_read_btrace): Support BTRACE_FORMAT_PT.
* nat/linux-btrace.h (struct btrace_tinfo_pt): New.
(struct btrace_target_info)<pt>: New.
* record-btrace.c (set_record_btrace_pt_cmdlist)
(show_record_btrace_pt_cmdlist): New.
(record_btrace_print_pt_conf): New.
(record_btrace_print_conf): Support BTRACE_FORMAT_PT.
(btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT.
(cmd_record_btrace_pt_start): New.
(cmd_record_btrace_start): Support BTRACE_FORMAT_PT.
(cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New.
(_initialize_record_btrace): Add new commands.
* remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New.
(remote_protocol_features): Add "Qbtrace:pt".
Add "Qbtrace-conf:pt:size".
(remote_supports_btrace): Support BTRACE_FORMAT_PT.
(btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size.
(remote_enable_btrace): Support BTRACE_FORMAT_PT.
(_initialize_remote): Add new commands.
gdbserver/
* linux-low.c: Include "rsp-low.h"
(linux_low_encode_pt_config, linux_low_encode_raw): New.
(linux_low_read_btrace): Support BTRACE_FORMAT_PT.
(linux_low_btrace_conf): Support BTRACE_FORMAT_PT.
(handle_btrace_enable_pt): New.
(handle_btrace_general_set): Support "pt".
(handle_btrace_conf_general_set): Support "pt:size".
doc/
* gdb.texinfo (Process Record and Replay): Spell out that variables
and registers are not available during btrace replay.
Describe the new "record btrace pt" command.
Describe the new "set|show record btrace pt buffer-size" options.
(General Query Packets): Describe the new Qbtrace:pt and
Qbtrace-conf:pt:size packets.
Expand "bts" to "Branch Trace Store".
Update the branch trace DTD.
Check for libipt, an Intel(R) Processor Trace decoder library. The sources
can be found on github at:
https://github.com/01org/processor-trace
gdb/
* configure.ac: Check for libipt
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in (LIBIPT): New.
(CLIBS): Add $LIBIPT.
* NEWS: document new configure options
It was found that from
(gdb) set debug compile 1
(gdb) compile code 1
[...]
allocated 0x7f bytes at 0x7ffff7ff9000 prot 5
allocated 0x38 bytes at 0x7ffff7ff8000 prot 1
lookup undefined ELF symbol "_GLOBAL_OFFSET_TABLE_"
allocated 0x10 bytes at 0x7ffff7ff7000 for registers
(gdb) _
the message 'lookup undefined ELF symbol' looks as an error to people,
including to myself once.
Change it to:
allocated 0x7f bytes at 0x7ffff7ff9000 prot 5
allocated 0x38 bytes at 0x7ffff7ff8000 prot 1
ELF symbol "_GLOBAL_OFFSET_TABLE_" relocated to zero
allocated 0x10 bytes at 0x7ffff7ff7000 for registers
(gdb) _
gdb/ChangeLog
2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
* compile/compile-object-load.c (compile_object_load): Replace debug
message "lookup undefined ELF symbol" by 3 more specific messages.
For the Renesas rl78 architecture, associate a flags type with the PSW
register. This will cause symbolic flags to be printed when using
the "info registers" command.
gdb/ChangeLog:
* rl78-tdep.c (struct gdbarch_tdep): Add new field, rl78_psw_type.
(rl78_register_type): Add case for RL78_PSW_REGNUM.
(rl78_gdbarch_init): Initialize rl78_psw_type.
