* Makefile.am (eelf64bmip.c): Depend on emulparams/elf64bmip-defs.sh.
(eelf64btsmip.c, eelf64ltsmip.c): Likewise.
* Makefile.in: Regenerate.
* emulparams/elf32bmipn32-defs.sh (INITIAL_READONLY_SECTIONS): Include
.reginfo rather than .MIPS.options.
* emulparams/elf64bmip-defs.sh: New file.
* emulparams/elf64bmip.sh: Include it.
(COMMONPAGESIZE): Delete.
* emulparams/elf64btsmip.sh: As for elf64bmip.sh.
ld/testsuite/
* ld-mips-elf/branch-misc-1.d: Set the start address to 0x20000000.
* ld-mips-elf/jalbal.d: Likewise 0x200000a0.
* ld-mips-elf/jaloverflow-2.d: Likewise 0x20000000.
* ld-mips-elf/reloc-3-n32.d: Likewise.
* ld-mips-elf/reloc-3.d: Likewise.
* ld-mips-elf/textrel-1.d: Don't require a specific file offset for
.dynamic.
* emulparams/elf32xtensa.sh: Set MAXPAGESIZE here instead of including
xtensa-config.sh.
* Makefile.am (eelf32xtensa.c): Remove dependency on xtensa-config.sh.
* Makefile.in: Regenerate.
* Makefile.am: Add rules to build pe-arm-wince.lo and pei-arm-wince.lo objects.
* Makefile.in: Regenerate.
* pe-arm-wince.c: New file.
* pei-arm-wince.c: New file.
* pei-arm.c: Remove ARM_WINCE block.
* pe-arm.c: Remove ARM_WINCE block. Rename
bfd_arm_pe_allocate_interworking_sections,
bfd_arm_pe_get_bfd_for_interworking, and
bfd_arm_pe_process_before_allocation to
bfd_armpe_allocate_interworking_sections,
bfd_armpe_get_bfd_for_interworking, and
bfd_armpe_process_before_allocation. Move them before including bfd.h.
* bfd.c: ARM wince bfd format names were renamed. Adjust.
* coff-arm.c [ARM_WINCE]: Adjust so Windows CE doesn't end up with unexpected/conflicting relocs.
* targets.c: The arm-wince-pe target got its own new vector. Adjust.
* config.bfd: Likewise.
* configure.in: Likewise.
* configure: Regenerate.
binutils
* configure.in: Split arm-pe and arm-wince-pe. Build dlltool with -DDLLTOOL_ARM_WINCE for Windows CE case.
* configure: Regenerate.
* dlltool.c: Add support for arm-wince.
gas
* Makefile.am (TARG_ENV_HFILES): Add te-wince-pe.h.
* Makefile.in: Regenerate.
* config/tc-arm.h [TARGET_FORMAT]: ARM wince bfd names were renamed. Adjust.
ld
* Makefile.am: Split arm-wince into its own emulation.
* Makefile.in: Regenerate.
* configure.tgt: Set targ_emul to arm_wince_pe for ARM Windows CE targets.
* pe-dll.c : Define PE_ARCH_arm_wince.
(pe_detail_list): Add PE_ARCH_arm_wince case.
(make_one): Handle PE_ARCH_arm_epoc and PE_ARCH_arm_wince cases.
* emulparams/arm_wince_pe.sh: New file.
* emultempl/pe.em: Handle new TARGET_IS_arm_wince_pe define.
Remap bfd_arm_allocate_interworking_sections, bfd_arm_get_bfd_for_interworking and
bfd_arm_process_before_allocation for arm-pe and arm-wince-pe targets too.
(gld_${EMULATION_NAME}_recognized_file): Handle arm-wince and arm-epoc bfd format names.
2006-08-02 Richard Sandiford <richard@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
* config.bfd (sh-*-vxworks): Use bfd_elf32_shvxworks_vec and
bfd_elf32_shlvxworks_vec.
* configure.in (bfd_elf32_sh64_vec): Add elf-vxworks.lo.
(bfd_elf32_sh64l_vec, bfd_elf32_sh64lin_vec): Likewise.
(bfd_elf32_sh64blin_vec, bfd_elf32_sh64lnbsd_vec): Likewise.
(bfd_elf32_sh64nbsd_vec, bfd_elf32_sh_vec): Likewise.
(bfd_elf32_shblin_vec, bfd_elf32_shl_vec): Likewise.
(bfd_elf32_shl_symbian_vec, bfd_elf32_shlin_vec): Likewise.
(bfd_elf32_shlnbsd_vec, bfd_elf32_shnbsd_vec): Likewise.
(bfd_elf32_shlvxworks_vec, bfd_elf32_shvxworks_vec): New stanzas.
* configure: Regenerate.
* Makefile.am: Regenerate dependencies.
* Makefile.in: Regenerate.
* elf-vxworks.c (elf_vxworks_gott_symbol_p): New function.
(elf_vxworks_add_symbol_hook): Use it.
(elf_vxworks_link_output_symbol_hook): Likewise. Use the hash
table entry to check for weak undefined symbols and to obtain
the original bfd.
(elf_vxworks_emit_relocs): Use target_index instead of this_idx.
* elf32-sh-relocs.h: New file, split from elf32-sh.c.
(R_SH_DIR32): Use SH_PARTIAL32 for the partial_inplace field,
SH_SRC_MASK32 for the src_mask field, and SH_ELF_RELOC for the
special_function field.
(R_SH_REL32): Use SH_PARTIAL32 and SH_SRC_MASK32 here too.
(R_SH_REL32, R_SH_TLS_GD_32, R_SH_TLS_LD_32): Likewise.
(R_SH_TLS_LDO_32, R_SH_TLS_IE_32, R_SH_TLS_LE_32): Likewise.
(R_SH_TLS_DTPMOD32, R_SH_TLS_DTPOFF32, R_SH_TLS_TPOFF32): Likewise.
(R_SH_GOT32, R_SH_PLT32, R_SH_COPY, R_SH_GLOB_DAT): Likewise.
(R_SH_JMP_SLOT, R_SH_RELATIVE, R_SH_GOTOFF, R_SH_GOTPC): Likewise.
(SH_PARTIAL32, SH_SRC_MASK32, SH_ELF_RELOC): Undefine at end of file.
* elf32-sh.c: Include elf32-vxworks.h.
(MINUS_ONE): Define.
(sh_elf_howto_table): Include elf32-sh-relocs.h with SH_PARTIAL32
set to TRUE, SH_SRC_MASK32 set to 0xffffffff, and SH_ELF_RELOC set
to sh_elf_reloc.
(sh_vxworks_howto_table): New variable. Include elf32-sh-relocs.h
with SH_PARTIAL32 set to FALSE, SH_SRC_MASK32 set to 0, and
SH_ELF_RELOC set to bfd_elf_generic_reloc.
(vxworks_object_p, get_howto_table): New functions.
(sh_elf_reloc_type_lookup): Fix typo. Use get_howto_table.
(sh_elf_info_to_howto): Use get_howto_table.
(sh_elf_relax_section): Honor the partial_inplace field of the
R_SH_DIR32 howto.
(sh_elf_relax_delete_bytes): Likewise.
(elf_sh_plt_info): New structure.
(PLT_ENTRY_SIZE): Replace both definitions with...
(ELF_PLT_ENTRY_SIZE): ...this new macro, with separate definitions for
INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_entry_be): Update sizes of both definitions accordingly.
(elf_sh_plt0_entry_le): Likewise.
(elf_sh_plt_entry_be, elf_sh_plt_entry_le): Likewise.
(elf_sh_pic_plt_entry_be, elf_sh_pic_plt_entry_le): Likewise.
(elf_sh_plts): New structure, with separate definitions for
INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_entry): Delete both definitions.
(elf_sh_plt_entry, elf_sh_pic_plt_entry): Likewise.
(elf_sh_sizeof_plt, elf_sh_plt_plt0_offset): Likewise.
(elf_sh_plt_temp_offset, elf_sh_plt_symbol_offset): Likewise.
(elf_sh_plt_reloc_offset): Likewise.
(movi_shori_putval): Delete in favor of...
(install_plt_field): ...this new function, with separate definitions
for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(get_plt_info): New function, with separate definitions
for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_linker_offset, elf_sh_plt0_gotid_offset): Delete.
(VXWORKS_PLT_HEADER_SIZE, VXWORKS_PLT_ENTRY_SIZE): New macros.
(vxworks_sh_plt0_entry_be, vxworks_sh_plt0_entry_le): New constants.
(vxworks_sh_plt_entry_be, vxworks_sh_plt_entry_le): Likewise.
(vxworks_sh_pic_plt_entry_be, vxworks_sh_pic_plt_entry_le): Likewise.
(get_plt_index, get_plt_offset): New functions.
(elf_sh_link_hash_table): Add srelplt2, plt_info and vxworks_p fields.
(sh_elf_link_hash_table_create): Initialize them.
(sh_elf_create_dynamic_sections): Call
elf_vxworks_create_dynamic_sections for VxWorks.
(allocate_dynrelocs): Use htab->plt_info to get the size of PLT
entries. Allocate relocation entries in .rela.plt.unloaded if
generating a VxWorks executable.
(sh_elf_always_size_sections): New function.
(sh_elf_size_dynamic_sections): Extend .rela.plt handling to
.rela.plt.unloaded.
(sh_elf_relocate_section): Use get_howto_table. Honor
partial_inplace when calculating the addend for dynamic
relocations. Use get_plt_index.
(sh_elf_finish_dynamic_symbol): Use get_plt_index, install_plt_field
and htab->plt_info. Fill in the bra .plt offset for VxWorks
executables. Populate .rela.plt.unloaded. Do not make
_GLOBAL_OFFSET_TABLE_ absolute on VxWorks.
(sh_elf_finish_dynamic_sections): Use install_plt_field and
htab->plt_info. Handle cases where there is no special PLT header.
Populate the first relocation in .rela.plt.unloaded and fix up
the remaining entries.
(sh_elf_plt_sym_val): Use get_plt_info.
(elf_backend_always_size_sections): Define.
(TARGET_BIG_SYM, TARGET_BIG_NAME): Override for VxWorks.
(TARGET_LITTLE_SYM, TARGET_BIG_SYM): Likewise.
(elf32_bed, elf_backend_want_plt_sym): Likewise.
(elf_symbol_leading_char, elf_backend_want_got_underscore): Likewise.
(elf_backend_grok_prstatus, elf_backend_grok_psinfo): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing): Likewise.
(ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): Likewise.
* targets.c (bfd_elf32_shlvxworks_vec): Declare.
(bfd_elf32_shvxworks_vec): Likewise.
(_bfd_target_vector): Include bfd_elf32_shlvxworks_vec and
bfd_elf32_shvxworks_vec.
gas/
* config/tc-sh.c (apply_full_field_fix): New function.
(md_apply_fix): Use it instead of md_number_to_chars. Do not fill
in fx_addnumber for BFD_RELOC_32_PLT_PCREL.
(tc_gen_reloc): Use fx_addnumber rather than 0 as the default case.
* config/tc-sh.h (TARGET_FORMAT): Override for TE_VXWORKS.
ld/
2006-08-02 Richard Sandiford <richard@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* Makefile.am (ALL_EMULATIONS): Add eshelf_vxworks.o and
eshlelf_vxworks.o.
(eshelf_vxworks.c, eshlelf_vxworks.c): New rules.
* Makefile.in: Regenerate.
* configure.tgt (sh-*-vxworks): Use shelf_vxworks and
shlelf_vxworks.
* emulparams/shelf_vxworks.sh: New file.
* emulparams/shlelf_vxworks.sh: Likewise.
* emulparams/vxworks.sh (FINI): Prefix _etext with ${SYMPREFIX}.
(OTHER_END_SYMBOLS): Likewise _ehdr.
(DATA_END_SYMBOLS): Likewise _edata.
* emultempl/vxworks.em (vxworks_after_open): Check whether output_bfd
is indeed an ELF file before dealing with --force-dynamic.
ld/testsuite/
* ld-sh/rd-sh.exp: Treat vxworks1-static.d specially.
* ld-sh/sh-vxworks.exp: New file.
* ld-sh/sh.exp: Extend sh-linux SIZEOF_HEADERS handling to
sh-*-vxworks.
* ld-sh/vxworks1-le.dd, ld-sh/vxworks1-lib-le.dd,
* ld-sh/vxworks1-lib.dd, ld-sh/vxworks1-lib.nd,
* ld-sh/vxworks1-lib.rd, ld-sh/vxworks1-lib.s,
* ld-sh/vxworks1-static.d, ld-sh/vxworks1.dd,
* ld-sh/vxworks1.ld, ld-sh/vxworks1.rd, ld-sh/vxworks1.s,
* ld-sh/vxworks2-static.sd, ld-sh/vxworks2.s,
* ld-sh/vxworks2.sd, ld-sh/vxworks3-le.dd,
* ld-sh/vxworks3-lib-le.dd, ld-sh/vxworks3-lib.dd,
* ld-sh/vxworks3-lib.s, ld-sh/vxworks3.dd, ld-sh/vxworks3.s,
* ld-sh/vxworks4.d, ld-sh/vxworks4a.s, ld-sh/vxworks4b.s,
* ld-sh/reloc1.s, ld-sh/reloc1.d: New tests.
Daniel Jacobowitz <dan@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Zack Weinberg <zack@codesourcery.com>
Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
bfd/
* bfd-in2.h: Regenerate.
* config.bfd (mips*-*-vxworks*, mips*el-*-vxworks*): New stanzas.
* configure.in (bfd_elf32_bigmips_vxworks_vec): New stanza.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(bfd_elf32_bigmips_vec): Add elf-vxworks.lo.
(bfd_elf32_littlemips_vec): Likewise.
(bfd_elf32_nbigmips_vec): Likewise.
(bfd_elf32_nlittlemips_vec): Likewise.
(bfd_elf32_ntradbigmips_vec): Likewise.
(bfd_elf32_ntradlittlemips_vec): Likewise.
(bfd_elf32_tradbigmips_vec): Likewise.
(bfd_elf32_tradlittlemips_vec): Likewise.
(bfd_elf64_bigmips_vec): Likewise.
(bfd_elf64_littlemips_vec): Likewise.
(bfd_elf64_tradbigmips_vec): Likewise.
(bfd_elf64_tradlittlemips_vec): Likewise.
* elf32-mips.c: Include elf-vxworks.h.
(mips_info_to_howto_rel): Use elf_backend_mips_rtype_to_howto
instead of calling mips_elf32_rtype_to_howto directly.
(mips_vxworks_copy_howto_rela): New reloc howto.
(mips_vxworks_jump_slot_howto_rela): Likewise.
(mips_vxworks_bfd_reloc_type_lookup): New function.
(mips_vxworks_rtype_to_howto): Likewise.
(mips_vxworks_final_write_processing): Likewise.
(TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Override for VxWorks.
(TARGET_BIG_SYM, TARGET_BIG_NAME, elf_bed, ELF_MAXPAGESIZE): Likewise.
(elf_backend_want_got_plt): Likewise.
(elf_backend_want_plt_sym): Likewise.
(elf_backend_got_symbol_offset): Likewise.
(elf_backend_want_dynbss): Likewise.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_got_header_size: Likewise.
(elf_backend_plt_readonly): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Likewise.
(elf_backend_mips_rtype_to_howto): Likewise.
(elf_backend_adjust_dynamic_symbol): Likewise.
(elf_backend_finish_dynamic_symbol): Likewise.
(bfd_elf32_bfd_link_hash_table_create): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing: Likewise.
(elf_backend_additional_program_headers): Likewise.
(elf_backend_modify_segment_map): Likewise.
(elf_backend_symbol_processing): Likewise.
* elfxx-mips.c: Include elf-vxworks.h.
(mips_elf_link_hash_entry): Add is_relocation_target and
is_branch_target fields.
(mips_elf_link_hash_table): Add is_vxworks, srelbss, sdynbss, srelplt,
srelplt2, sgotplt, splt, plt_header_size and plt_entry_size fields.
(MIPS_ELF_RELA_SIZE, MIPS_ELF_REL_DYN_NAME): New macros.
(MIPS_RESERVED_GOTNO): Take a mips_elf_link_hash_table argument.
Return 3 for VxWorks.
(ELF_MIPS_GP_OFFSET): Change the argument from a bfd to a
mips_elf_link_hash_table. Return 0 for VxWorks.
(MIPS_ELF_GOT_MAX_SIZE): Change the argument from a bfd to a
mips_elf_link_hash_table. Update the call to ELF_MIPS_GP_OFFSET.
(mips_vxworks_exec_plt0_entry): New variable.
(mips_vxworks_exec_plt_entry): Likewise.
(mips_vxworks_shared_plt0_entry): Likewise.
(mips_vxworks_shared_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize the new hash_entry fields.
(mips_elf_rel_dyn_section): Change the bfd argument to a
mips_elf_link_hash_table. Use MIPS_ELF_REL_DYN_NAME to get
the name of the section.
(mips_elf_initialize_tls_slots): Update the call to
mips_elf_rel_dyn_section.
(mips_elf_gotplt_index): New function.
(mips_elf_local_got_index): Add an input_section argument.
Update the call to mips_elf_create_local_got_entry.
(mips_elf_got_page): Likewise.
(mips_elf_got16_entry): Likewise.
(mips_elf_create_local_got_entry): Add bfd_link_info and input_section
arguments. Create dynamic relocations for each entry on VxWorks.
(mips_elf_merge_gots): Update the use of MIPS_ELF_GOT_MAX_SIZE.
(mips_elf_multi_got): Update the uses of MIPS_ELF_GOT_MAX_SIZE
and MIPS_RESERVED_GOTNO.
(mips_elf_create_got_section): Update the uses of
MIPS_ELF_GOT_MAX_SIZE. Create .got.plt on VxWorks.
(is_gott_symbol): New function.
(mips_elf_calculate_relocation): Use a dynobj local variable.
Update the calls to mips_elf_local_got_index, mips_elf_got16_entry and
mips_elf_got_page_entry. Set G to the .got.plt entry when calculating
VxWorks R_MIPS_CALL* relocations. Calculate and use G for all GOT
relocations on VxWorks. Add dynamic relocations for references
to the VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Don't
create dynamic relocations for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64
in VxWorks executables.
(mips_elf_allocate_dynamic_relocations): Add a bfd_link_info argument.
Use MIPS_ELF_RELA_SIZE to calculate the size of a VxWorks entry.
Don't allocate a null entry on VxWorks.
(mips_elf_create_dynamic_relocation): Update the call to
mips_elf_rel_dyn_section. Use absolute rather than relative
relocations for VxWorks, and make them RELA rather than REL.
(_bfd_mips_elf_create_dynamic_sections): Don't make .dynamic
read-only on VxWorks. Update the call to mips_elf_rel_dyn_section.
Create the .plt, .rela.plt, .dynbss and .rela.bss sections on
VxWorks. Likewise create the _PROCEDURE_LINKAGE_TABLE symbol.
Call elf_vxworks_create_dynamic_sections for VxWorks and
initialize the plt_header_size and plt_entry_size fields.
(_bfd_mips_elf_check_relocs): Don't allow GOT relocations to be
used in VxWorks executables. Don't allocate dynamic relocations
for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 in VxWorks executables.
Set is_relocation_target for each symbol referenced by a relocation.
Allocate .rela.dyn entries for relocations against the special
VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Create GOT
entries for all VxWorks R_MIPS_GOT16 relocations. Don't allocate
a global GOT entry for symbols mentioned in VxWorks R_MIPS_CALL*,
R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 relocations. Update the calls
to mips_elf_rel_dyn_section and mips_elf_allocate_dynamic_relocations.
Set is_branch_target for symbols mentioned in R_MIPS_PC16 or R_MIPS_26
relocations. Don't set no_fn_stub on VxWorks.
(_bfd_mips_elf_adjust_dynamic_symbol): Update the call to
mips_elf_allocate_dynamic_relocations.
(_bfd_mips_vxworks_adjust_dynamic_symbol): New function.
(_bfd_mips_elf_always_size_sections): Do not allocate GOT page
entries for VxWorks, and do not create multiple GOTs.
(_bfd_mips_elf_size_dynamic_sections): Use MIPS_ELF_REL_DYN_NAME.
Handle .got specially for VxWorks. Update the uses of
MIPS_RESERVED_GOTNO and mips_elf_allocate_dynamic_relocations.
Check for sgotplt and splt. Allocate the .rel(a).dyn contents last,
once its final size is known. Set DF_TEXTREL for VxWorks. Add
DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL, DT_PLTRELSZ and DT_JMPREL
tags on VxWorks. Do not add the MIPS-specific tags for VxWorks.
(_bfd_mips_vxworks_finish_dynamic_symbol): New function.
(mips_vxworks_finish_exec_plt): Likewise.
(mips_vxworks_finish_shared_plt): Likewise.
(_bfd_mips_elf_finish_dynamic_sections): Remove an unncessary call
to mips_elf_rel_dyn_section. Use a VxWorks-specific value of
DT_PLTGOT. Handle DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL,
DT_PLTRELSZ and DT_JMPREL. Update the uses of MIPS_RESERVED_GOTNO
and mips_elf_rel_dyn_section. Use a different GOT header for
VxWorks. Don't sort .rela.dyn on VxWorks. Finish the PLT on VxWorks.
(_bfd_mips_elf_link_hash_table_create): Initialize the new
mips_elf_link_hash_table fields.
(_bfd_mips_vxworks_link_hash_table_create): New function.
(_bfd_mips_elf_final_link): Set the GP value to _GLOBAL_OFFSET_TABLE_
on VxWorks. Update the call to ELF_MIPS_GP_OFFSET.
* elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Declare.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_vxworks_link_hash_table_create): Likewise.
* libbfd.h: Regenerate.
* Makefile.am (elfxx-mips.lo): Depend on elf-vxworks.h.
(elf32-mips.lo): Likewise.
* Makefile.in: Regenerate.
* reloc.c (BFD_RELOC_MIPS_COPY, BFD_RELOC_MIPS_JUMP_SLOT): Declare.
* targets.c (bfd_elf32_bigmips_vxworks_vec): Declare.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(_bfd_target_vector): Add entries for them.
gas/
* config/tc-mips.c (mips_target_format): Handle vxworks targets.
(md_begin): Complain about -G being used for PIC. Don't change
the text, data and bss alignments on VxWorks.
(reloc_needs_lo_p): Don't return true for R_MIPS_GOT16 when
generating VxWorks PIC.
(load_address): Extend SVR4_PIC handling to VXWORKS_PIC.
(macro): Likewise, but do not treat la $25 specially for
VxWorks PIC, and do not handle jal.
(OPTION_MVXWORKS_PIC): New macro.
(md_longopts): Add -mvxworks-pic.
(md_parse_option): Don't complain about using PIC and -G together here.
Handle OPTION_MVXWORKS_PIC.
(md_estimate_size_before_relax): Always use the first relaxation
sequence on VxWorks.
* config/tc-mips.h (VXWORKS_PIC): New.
gas/testsuite/
* gas/mips/vxworks1.s, gas/mips/vxworks1.d,
* gas/mips/vxworks1-xgot.d: New tests.
* gas/mips/mips.exp: Run them. Do not run other tests on VxWorks.
include/elf/
* mips.h (R_MIPS_COPY, R_MIPS_JUMP_SLOT): New relocs.
ld/
* configure.tgt (mips*el-*-vxworks*, mips*-*-vxworks*): Use
separate VxWorks emulations.
* emulparams/elf32ebmipvxworks.sh: New file.
* emulparams/elf32elmipvxworks.sh: New file.
* Makefile.am (ALL_EMULATIONS): Add eelf32ebmipvxworks.o and
eelf32elmipvxworks.o.
(eelf32ebmipvxworks.c, eelf32elmipvxworks.c): New rules.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-mips/vxworks1.dd, ld-mips/vxworks1.ld, ld-mips/vxworks1-lib.dd,
* ld-mips/vxworks1-lib.nd, ld-mips/vxworks1-lib.rd,
* ld-mips/vxworks1-lib.s, ld-mips/vxworks1.rd, ld-mips/vxworks1.s,
* ld-mips/vxworks1-static.d, ld-mips/vxworks2.s, ld-mips/vxworks2.sd,
* ld-mips/vxworks2-static.sd: New tests.
* ld-mips/mips-elf.exp: Run them.
* configure.in (bfd_elf32_bigarm_vec): Include elf-vxworks.lo.
(bfd_elf32_bigarm_symbian_vec): Likewise.
(bfd_elf32_bigarm_vxworks_vec): Likewise.
(bfd_elf32_littlearm_vec): Likewise.
(bfd_elf32_littlearm_symbian_vec): Likewise.
(bfd_elf32_littlearm_vxworks_vec): Likewise.
* configure: Regenerate.
* elf32-arm.c: Include libiberty.h and elf-vxworks.h.
(RELOC_SECTION, RELOC_SIZE, SWAP_RELOC_IN, SWAP_RELOC_OUT): New macros.
(elf32_arm_vxworks_bed): Add forward declaration.
(elf32_arm_howto_table_1): Fix the masks for R_ASM_ABS12.
(elf32_arm_vxworks_exec_plt0_entry): New table.
(elf32_arm_vxworks_exec_plt_entry): Likewise.
(elf32_arm_vxworks_shared_plt_entry): Likewise.
(elf32_arm_link_hash_table): Add vxworks_p and srelplt2 fields.
(reloc_section_p): New function.
(create_got_section): Use RELOC_SECTION.
(elf32_arm_create_dynamic_sections): Likewise. Call
elf_vxworks_create_dynamic_sections for VxWorks targets.
Choose between the two possible values of plt_header_size
and plt_entry_size.
(elf32_arm_link_hash_table_create): Initialize vxworks_p and srelplt2.
(elf32_arm_abs12_reloc): New function.
(elf32_arm_final_link_relocate): Call it. Allow the creation of
dynamic R_ARM_ABS12 relocs on VxWorks. Use reloc_section_p,
RELOC_SIZE, SWAP_RELOC_OUT and RELOC_SECTION. Initialize the
r_addend fields of relocs. On rela targets, skip any code that
adjusts in-place addends. When using _bfd_link_final_relocate
to perform a final relocation, pass rel->r_addend as the addend
argument.
(elf32_arm_merge_private_bfd_data): If one of the bfds is a VxWorks
object, ignore flags that are not standard on VxWorks.
(elf32_arm_check_relocs): Allow the creation of dynamic R_ARM_ABS12
relocs on VxWorks. Use reloc_section_p.
(elf32_arm_adjust_dynamic_symbol): Use RELOC_SECTION and RELOC_SIZE.
(allocate_dynrelocs): Use RELOC_SIZE. Account for the size of
.rela.plt.unloaded relocs on VxWorks targets.
(elf32_arm_size_dynamic_sections): Use RELOC_SIZE. Check for
.rela.plt.unloaded as well as .rel(a).plt. Add DT_RELA* tags
instead of DT_REL* tags on RELA targets.
(elf32_arm_finish_dynamic_symbol): Use RELOC_SECTION, RELOC_SIZE
and SWAP_RELOC_OUT. Initialize r_addend fields. Handle VxWorks
PLT entries. Do not make _GLOBAL_OFFSET_TABLE_ absolute on VxWorks.
(elf32_arm_finish_dynamic_sections): Use RELOC_SECTION, RELOC_SIZE
and SWAP_RELOC_OUT. Initialize r_addend fields. Handle DT_RELASZ
like DT_RELSZ. Handle the VxWorks form of initial PLT entry.
Correct the .rela.plt.unreloaded symbol indexes.
(elf32_arm_output_symbol_hook): Call the VxWorks version of this
hook on VxWorks targets.
(elf32_arm_vxworks_link_hash_table_create): Set vxworks_p to true.
Minor formatting tweak.
(elf32_arm_vxworks_final_write_processing): New function.
(elf_backend_add_symbol_hook): Override for VxWorks and reset
for Symbian.
(elf_backend_final_write_processing): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_want_plt_sym): Likewise.
(ELF_MAXPAGESIZE): Likewise.
(elf_backend_may_use_rel_p): Minor formatting tweak.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_rela_normal): Likewise.
* Makefile.in (elf32-arm.lo): Depend on elf-vxworks.h.
gas/
* config/tc-arm.c (md_apply_fix): Install a value of zero into a
BFD_RELOC_ARM_OFFSET_IMM field if we're going to generate a RELA
R_ARM_ABS12 reloc.
(tc_gen_reloc): Keep the original fx_offset for RELA pc-relative
relocs, but adjust by md_pcrel_from_section. Create R_ARM_ABS12
relocations for BFD_RELOC_ARM_OFFSET_IMM on RELA targets.
gas/testsuite/
* gas/arm/abs12.s, gas/arm/abs12.d: New test.
* gas/arm/pic.d: Skip for *-*-vxworks*...
* gas/arm/pic_vxworks.d: ...use this version instead.
* gas/arm/unwind_vxworks.d: Fix expected output.
ld/
* emulparams/armelf_vxworks.sh: Include vxworks.sh.
(MAXPAGESIZE): Define.
* emulparams/vxworks.sh: Undefine.
* Makefile.am (earmelf_vxworks.c): Depend on vxworks.sh and vxworks.em.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-arm/vxworks1.dd, ld-arm/vxworks1.ld, ld-arm/vxworks1-lib.dd,
* ld-arm/vxworks1-lib.nd, ld-arm/vxworks1-lib.rd,
* ld-arm/vxworks1-lib.s, ld-arm/vxworks1.rd, ld-arm/vxworks1.s,
* ld-arm/vxworks1-static.d, ld-arm/vxworks2.s, ld-arm/vxworks2.sd,
* ld-arm/vxworks2-static.sd: New tests.
* ld-arm/arm-elf.exp: Run them.
* elf32-ppc.c (ppc_elf_plt_type): New enumeration.
(ppc_elf_link_hash_table): Replace old_got and new_got with
plt_type and can_use_new_plt.
(ppc_elf_create_dynamic_sections): Add SEC_HAS_CONTENTS,
SEC_LOAD and SEC_READONLY to the VxWorks .plt flags.
(ppc_elf_check_relocs): Set can_use_new_plt instead of new_plt.
Move from plt_type == PLT_UNSET to PLT_OLD instead of setting old_plt.
(ppc_elf_select_plt_layout): Move from plt_type == PLT_UNSET to
either plt_type == PLT_OLD or plt_type == PLT_NEW. Assert that
this function should not be called for VxWorks targets.
(ppc_elf_tls_setup): Use plt_type instead of old_got.
(allocate_got): Likewise. Rearrange so that max_before_header
is only used for PLT_OLD and PLT_NEW.
(allocate_dynrelocs): Use plt_type instead of old_got and is_vxworks.
(ppc_elf_size_dynamic_sections): Likewise.
(ppc_elf_relax_section): Likewise.
(ppc_elf_relocate_section): Likewise.
(ppc_elf_finish_dynamic_symbol): Likewise.
(ppc_elf_vxworks_link_hash_table_create): Initialize plt_type.
ld/
* emulparams/elf32ppccommon.sh: New file, extracted from...
* emulparams/elf32ppc.sh: ...here.
* emulparams/elf32ppcvxworks.sh: Include elf32ppccommon.sh
instead of elf32ppc.sh.
(BSS_PLT): Remove override.
* Makefile.am (eelf32lppc.c): Depend on elf32ppccommons.h.
(eelf32lppcnto.c, eelf32lppcsim.c, eelf32ppcnto.c): Likewise.
(eelf32ppc.c, eelf32ppc_fbsd.c, eelf32ppcsimm): Likewise.
(eelf32ppclinux.c): Likewise.
(eelf32ppcvxworks.c): Likewise. Add missing vxworks.sh dependency.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-powerpc/vxworks1-lib.s, ld-powerpc/vxworks1-lib.dd,
* ld-powerpc/vxworks1-lib.rd, ld-powerpc/vxworks1.s,
* ld-powerpc/vxworks1.dd, ld-powerpc/vxworks1.rd,
* ld-powerpc/vxworks1.ld, ld-powerpc/vxworks1.sd: New test.
* ld-powerpc/powerpc.exp: Run it.
for manual pages.
* Makefile.am (gprof.info, gprof.1): Depend on config.texi.
(config.texi): New file.
* Makefile.in: Regenerated.
* Makefile.am (configdoc.texi): Set top_srcdir in configdoc.texi..
* Makefile.in: Regenerated.
* ld.texinfo: Include configdoc.texi and ldver.texi in man pages.
Add @file documentation.
2005-07-14 Jim Blandy <jimb@redhat.com>
* configure.in: Add cases for Renesas m32c.
* configure: Regenerated.
bfd/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for m32c-*-elf (Renesas m32c and m16c).
* Makefile.am (ALL_MACHINES): Add cpu-m32c.lo.
(ALL_MACHINES_CFILES): Add cpu-m32c.c.
(BFD32_BACKENDS): Add elf32-m32c.lo.
(BFD32_BACKENDS_CFILES): Add elf32-m32c.c.
(cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'.
* Makefile.in: Regenerated.
* archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New
arch and mach codes.
(bfd_m32c_arch): New arch info object.
(bfd_archures_list): List bfd_m32c_arch.
* bfd-in2.h: Regenerated.
* config.bfd: Add case for the m32c.
* configure.in: Add case for the m32c.
* configure: Regenerated.
* cpu-m32c.c, elf32-m32c.c: New files.
* libbfd.h: Regenerated.
* targets.c (bfd_elf32_m32c_vec): Declare.
(_bfd_target_vector): List bfd_elf32_m32c_vec.
binutils/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* readelf.c: #include "elf/m32c.h"
(guess_is_rela, dump_relocations, get_machine_name): Add cases for
EM_M32C.
* Makefile.am (readelf.o): Update dependencies.
* Makefile.in: Regenerated.
cpu/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* m32c.cpu, m32c.opc: Machine description for the Renesas M32C.
gas/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C.
* Makefile.am (CPU_TYPES): List m32c.
(TARGET_CPU_CFILES): List config/tc-m32c.c.
(TARGET_CPU_HFILES): List config/tc-m32c.h.
* configure.in: Add case for m32c.
* configure.tgt: Add cases for m32c and m32c-*-elf.
* configure: Regenerated.
* config/tc-m32c.c, config/tc-m32c.h: New files.
* doc/Makefile.am (CPU_DOCS): Add c-m32c.texi.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set M32C.
* doc/as.texinfo: Add text for the M32C-specific options and line
comment characters, and refer to c-m32c.texi.
* doc/c-m32c.texi: New file.
include/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* dis-asm.h (print_insn_m32c): New declaration.
include/elf/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for Renesas M32C and M16C.
* common.h (EM_M32C): New machine number.
* m32c.h: New file.
ld/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o.
(eelf32m32c.c): New target.
* Makefile.in: Regenerated.
* configure.tgt: Add case for m32c-*-elf.
* emulparams/elf32m32c.sh: New file.
opcodes/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New.
* m32c-desc.h, m32c-opc.h: New.
* Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h.
(CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c,
m32c-opc.c.
(ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo,
m32c-ibld.lo, m32c-opc.lo.
(CLEANFILES): List stamp-m32c.
(M32C_DEPS): List stamp-m32c, if CGEN_MAINT.
(CGEN_CPUS): Add m32c.
(m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c)
(m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS.
(m32c_opc_h): New variable.
(stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo)
(m32c-opc.lo): New rules.
* Makefile.in: Regenerated.
* configure.in: Add case for bfd_m32c_arch.
* configure: Regenerated.
* disassemble.c (ARCH_m32c): New.
[ARCH_m32c]: #include "m32c-desc.h".
(disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c.
(disassemble_init_for_target) [ARCH_m32c]: Same.
* cgen-ops.h, cgen-types.h: New files.
* Makefile.am (HFILES): List them.
* Makefile.in: Regenerated.
* gas/Makefile.am: Have 'all' depend on 'info'.
* ld/Makefile.am: Have 'all' depend on 'info' and 'ld.1'.
* bfd/Makefile.in, binutils/Makefile.in, gas/Makefile.in
* ld/Makefile.in: Regenerate.
