The final "match all" case can take care of a few explicit entries:
Purge those. Also move s12z* into proper position (the table is
otherwise sorted, after all).
Commit 04f096fb9e ("Move the xc16x target to the obsolete list") moved
the architecture from the "obsolete but still available" to the
"obsolete / support removed" list in config.bfd, making the architecture
impossible to enable (except maybe via "enable everything" options").
Note that I didn't touch */po/*.po{,t} on the assumption that these
would be updated by some (half)automatic means.
cris support will be built into a 32-bit bfd if using --enable-targets=all
on a 32-bit host, so we may as well make targmatch.h include cris.
* config.bfd (cris): Remove #idef BFD64.
Add support for the AMDGCN architecture to BFD.
This is the bare minimum to get
$ ./configure --target=amdgcn-hsa-amdhsa --disable-gas
$ make all-binutils
working later in this series.
The specific AMDGCN models added here are a bit arbitrary, based on
what we intend to initially support in GDB. This list will need to be
updated in the future anyway. The complete up-to-date list of existing
AMDGPU models can be found here:
https://llvm.org/docs/AMDGPUUsage.html#processors
The ELF format for this architecture is documented here:
https://llvm.org/docs/AMDGPUUsage.html#elf-code-object
The flags for the "HSA" OS ABI are properly versioned and documented on
that page. But the NONE, PAL and MESA3D OS ABIs are not well documented
nor versioned. Taking a peek at the LLVM source code, we see that they
encode their flags the same way as HSA v3. For example, for PAL:
c8b614cd74/llvm/lib/Target/AMDGPU/MCTargetDesc/AMDGPUTargetStreamer.cpp (L601)
So at least, we know that all AMDGPU objects (of which AMDGCN objects
are a subset of) at the time of writing encode the specific GPU model in
the EF_AMDGPU_MACH field of e_flags.
bfd/ChangeLog:
* Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES):
Add cpu-amdgcn.c.
(BFD64_BACKENDS): Add elf64-amdgcn.lo.
(BFD64_BACKENDS_CFILES): Add elf64-amdgcn.c.
* Makefile.in: Re-generate.
* cpu-amdgcn.c: New.
* elf64-amdgcn.c: New.
* archures.c (bfd_architecture): Add bfd_arch_amdgcn and related
mach defines.
(bfd_amdgcn_arch): New.
(bfd_archures_list): Add bfd_amdgcn_arch.
* bfd-in2.h: Re-generate.
* config.bfd: Handle amdgcn* target.
* configure.ac: Handle amdgcn_elf64_le_vec.
* configure: Re-generate.
* elf-bfd.h (elf_target_id): Add AMDGCN_ELF_DATA.
* targets.c (amdgcn_elf64_le_vec): New.
(_bfd_target_vector): Add amdgcn_elf64_le_vec.
include/ChangeLog:
* elf/amdgpu.h: New.
* elf/common.h (ELFOSABI_AMDGPU_HSA): Add.
Change-Id: I969f7b14960797e88891c308749a6e341eece5b2
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
gas/config/tc-loongarch.c: In function ‘assember_macro_helper’:
gas/config/tc-loongarch.c:915:28: error: right shift count >= width of type [-Werror=shift-count-overflow]
915 | hi32 = insn->args[1] >> 32;
| ^~
One possible fix is to make offsetT a 64-bit type for loongarch32.
This also makes bfd/targmatch.h (generated from bfd/config.bfd)
consistent since the loongarch32 match is inside #ifdef BFD64.
* config.bfd (loongarch32-*): Set want64.
This adds support for efi-*-aarch64 by virtue of adding a new PEI target
pei-aarch64-little. This is not a full target and only exists to support EFI
at this time.
This means that this target does not support relocation processing and is mostly
a container format. This format has been added to elf based aarch64 targets
such that efi images can be made natively on Linux.
However this target is not valid for use with gas but only with objcopy.
With these changes the resulting file is recognized as an efi image by
third party tools:
> pecli info hello.efi
Metadata
================================================================================
MD5: 598c32a778b0f0deebe977fef8578c4e
SHA1: 4580121edd5cb4dc40f51b28f171fd15250df84c
SHA256: 3154bd7cf42433d1c957f6bf55a17ad8c57ed41b29df2d485703349fd6ff1d5c
Imphash:
Size: 47561 bytes
Type: PE32+ executable (EFI application) (stripped to external PDB), for MS Windows
Compile Time: 1970-01-01 00:00:00 (UTC - 0x0 )
Entry point: 0x2000 (section .text)
Sections
================================================================================
Name RWX VirtSize VirtAddr RawAddr RawSize Entropy md5
.text R-X 0x5bb0 0x2000 0x400 0x5c00 6.39 551fbc264256a3f387de8a891500ae0d
.reloc R-- 0xc 0x8000 0x6000 0x200 0.02 0c45f6d812d079821c1d54c09ab89e1d
.data RW- 0x1d88 0x9000 0x6200 0x1e00 4.18 5d1137c09f01289dc62bf754f7290db3
.dynamic RW- 0xf0 0xb000 0x8000 0x200 0.34 5c94ed3206f05a277e6f04fbf131f131
.rela R-- 0xe58 0xc000 0x8200 0x1000 1.87 8b5c6bc30f3acb7ca7bf2e6789d68519
.dynsym R-- 0x138 0xd000 0x9200 0x200 0.96 bdcf5101da51aadc663ca8859f88138c
Imports
================================================================================
Any magic number is based on the Microsoft PE specification [1].
[1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format
bfd/ChangeLog:
2021-10-21 Tamar Christina <tamar.christina@arm.com>
PR binutils/26206
* .gitignore (pe-aarch64igen.c): New.
* Makefile.am (pei-aarch64.lo, pe-aarch64igen.lo, pei-aarch64.c,
pe-aarch64igen.c): Add support.
* Makefile.in: Likewise.
* bfd.c (bfd_get_sign_extend_vma): Add pei-aarch64-little.
* coff-aarch64.c: New file.
* coffcode.h (coff_set_arch_mach_hook, coff_set_flags,
coff_write_object_contents) Add aarch64 (aarch64_pei_vec) support.
* config.bfd: Likewise.
* configure: Likewise.
* configure.ac: Likewise.
* libpei.h (GET_OPTHDR_IMAGE_BASE, PUT_OPTHDR_IMAGE_BASE,
GET_OPTHDR_SIZE_OF_STACK_RESERVE, PUT_OPTHDR_SIZE_OF_STACK_RESERVE,
GET_OPTHDR_SIZE_OF_STACK_COMMIT, PUT_OPTHDR_SIZE_OF_STACK_COMMIT,
GET_OPTHDR_SIZE_OF_HEAP_RESERVE, PUT_OPTHDR_SIZE_OF_HEAP_RESERVE,
GET_OPTHDR_SIZE_OF_HEAP_COMMIT, PUT_OPTHDR_SIZE_OF_HEAP_COMMIT,
GET_PDATA_ENTRY, _bfd_peAArch64_bfd_copy_private_bfd_data_common,
_bfd_peAArch64_bfd_copy_private_section_data,
_bfd_peAArch64_get_symbol_info, _bfd_peAArch64_only_swap_filehdr_out,
_bfd_peAArch64_print_private_bfd_data_common,
_bfd_peAArch64i_final_link_postscript,
_bfd_peAArch64i_only_swap_filehdr_out, _bfd_peAArch64i_swap_aouthdr_in,
_bfd_peAArch64i_swap_aouthdr_out, _bfd_peAArch64i_swap_aux_in,
_bfd_peAArch64i_swap_aux_out, _bfd_peAArch64i_swap_lineno_in,
_bfd_peAArch64i_swap_lineno_out, _bfd_peAArch64i_swap_scnhdr_out,
_bfd_peAArch64i_swap_sym_in, _bfd_peAArch64i_swap_sym_out,
_bfd_peAArch64i_swap_debugdir_in, _bfd_peAArch64i_swap_debugdir_out,
_bfd_peAArch64i_write_codeview_record,
_bfd_peAArch64i_slurp_codeview_record,
_bfd_peAArch64_print_ce_compressed_pdata): New.
* peXXigen.c (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out,
pe_print_pdata, _bfd_XX_print_private_bfd_data_common,
_bfd_XX_bfd_copy_private_section_data, _bfd_XXi_final_link_postscript):
Support COFF_WITH_peAArch64,
* pei-aarch64.c: New file.
* peicode.h (coff_swap_scnhdr_in, pe_ILF_build_a_bfd, pe_ILF_object_p):
Support COFF_WITH_peAArch64.
(jtab): Add dummy entry that traps.
* targets.c (aarch64_pei_vec): New.
binutils/ChangeLog:
2021-10-21 Tamar Christina <tamar.christina@arm.com>
PR binutils/26206
* NEWS: Add new support.
* objcopy.c (convert_efi_target): Add efi-*-aarch64 support.
* testsuite/binutils-all/aarch64/pei-aarch64-little.d: New test.
* testsuite/binutils-all/aarch64/pei-aarch64-little.s: New test.
include/ChangeLog:
2021-10-21 Tamar Christina <tamar.christina@arm.com>
PR binutils/26206
* coff/aarch64.h: New file.
* coff/pe.h (IMAGE_FILE_MACHINE_ARM64): New.
Since ns32k-netbsd is as yet not removed, just marked obsolete,
the target should still be accepted with --enable-obsolete.
I also enabled ns32k-openbsd in ld since there doesn't seem to be a
good reason why that target is not supported there but is elsewhere.
bfd/
* config.bfd: Allow ns32k-netbsd.
ld/
* configure.tgt: Allow ns32k-openbsd.
As discussed previously, a.out support is now quite deprecated, and in
some cases removed, in both Binutils itself and NetBSD, so this legacy
default makes little sense. `netbsdelf*` and `netbsdaout*` still work
allowing the user to be explicit about there choice. Additionally, the
configure script warns about the change as Nick Clifton requested.
One possible concern was the status of NetBSD on NS32K, where only a.out
was supported. But per [1] NetBSD has removed support, and if it were to
come back, it would be with ELF. The binutils implementation is
therefore marked obsolete, per the instructions in the last message.
With that patch and this one applied, I have confirmed the following:
--target=i686-unknown-netbsd
--target=i686-unknown-netbsdelf
builds completely
--target=i686-unknown-netbsdaout
properly fails because target is deprecated.
--target=vax-unknown-netbsdaout builds completely except for gas, where
the target is deprecated.
[1]: https://mail-index.netbsd.org/tech-toolchain/2021/07/19/msg004025.html
---
bfd/config.bfd | 43 +++++++++++++--------
bfd/configure.ac | 5 +--
binutils/testsuite/binutils-all/nm.exp | 2 +-
binutils/testsuite/lib/binutils-common.exp | 7 +---
config/picflag.m4 | 4 +-
gas/configure.tgt | 9 +++--
gas/testsuite/gas/arm/blx-bl-convert.d | 2 +-
gas/testsuite/gas/arm/blx-local-thumb.d | 2 +-
gas/testsuite/gas/sh/basic.exp | 2 +-
gdb/configure.host | 34 +++++++----------
gdb/configure.tgt | 2 +-
gdb/testsuite/gdb.asm/asm-source.exp | 6 +--
intl/configure | 2 +-
ld/configure.tgt | 44 +++++++++++-----------
ld/testsuite/ld-arm/arm-elf.exp | 4 +-
ld/testsuite/ld-elf/elf.exp | 2 +-
ld/testsuite/ld-elf/shared.exp | 4 +-
libiberty/configure | 4 +-
netbsdpe was deprecated in c2ce831330.
Since then, a release has passed (2.37), and it was marked obselete in
5c9cbf07f3. Unless I am mistaken, that
means we can now remove support altogether.
All branches in the "active" code are remove, and the target is
additionally marked as obsolete next to the other removed ones for
libbfd and gdb.
Per [1] from the NetBSD toolchain list, PE/COFF support was removed a
decade ago. Furthermore, the sole mention of this target in the binutils
commit history was in 2002. Together, I'm led to believe this target
hasn't seen much attention in quite a while.
[1]: https://mail-index.netbsd.org/tech-toolchain/2021/06/16/msg003996.html
bfd/
* config.bfd: Remove netbsdpe entry.
binutils/
* configure.ac: Remove netbsdpe entry.
* testsuite/lib/binutils-common.exp (is_pecoff_format): Likewise.
* configure: Regenerate.
gas/
* configure.tgt: Remove netbsdpe entry.
gdb/
* configure.tgt: Add netbsdpe to removed targets.
ld/
* configure.tgt: Remove netbsdpe entry.
* testsuite/ld-bootstrap/bootstrap.exp: Likewise.
PR 27666
bfd * config.bfd: Do not add the sparc_elf32_vec or sparc_elf64_vec
vectors to Sparc Solaris2 targets.
ld * testsuite/ld-sparc/sparc.exp: Do not run the sparctests or
sparc64tests for Solaris2 targets.
RISC-V instruction/code is always little endian, but data might be
big-endian. Therefore, we can not use the original bfd_get/bfd_put
to get/put the code for big endian targets. Add new riscv_get_insn
and riscv_put_insn to always get/put code as little endian can resolve
the problem. Just remember to update them once we have supported
the 48-bit/128-bit instructions in the future patches.
bfd/
* config.bfd: Added targets riscv64be*-*-*, riscv32be*-*-* and
riscvbe*-*-*. Also added riscv_elf[32|64]_be_vec.
* configure.ac: Handle riscv_elf[32|64]_be_vec.
* configure: Regenerate.
* elfnn-riscv.c: Include <limits.h> and define CHAR_BIT for
riscv_is_insn_reloc.
(riscv_get_insn): RISC-V instructions are always little endian, but
bfd_get may be used for big-endian, so add new riscv_get_insn to handle
the insturctions.
(riscv_put_insn): Likewsie.
(riscv_is_insn_reloc): Check if we are relocaing an instruction.
(perform_relocation): Call riscv_is_insn_reloc to decide if we should
use riscv_[get|put]_insn or bfd_[get|put].
(riscv_zero_pcrel_hi_reloc): Use riscv_[get|put]_insn, bfd_[get|put]l32
or bfd_[get|put]l16 for code.
(riscv_elf_relocate_section): Likewise.
(riscv_elf_finish_dynamic_symbol): Likewise.
(riscv_elf_finish_dynamic_sections): Likewise.
(_bfd_riscv_relax_call): Likewise.
(_bfd_riscv_relax_lui): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_pc): Likewise.
(riscv_elf_object_p): Handled for big endian.
(TARGET_BIG_SYM, TARGET_BIG_NAME): Defined.
* targets.c: Add riscv_elf[32|64]_be_vec.
(_bfd_target_vector): Likewise.
gas/
* config/tc-riscv.c (riscv_target_format): Add elf64-bigriscv and
elf32-bigriscv.
(install_insn): Always write instructions as little endian.
(riscv_make_nops): Likewise.
(md_convert_frag_branch): Likewise.
(md_number_to_chars): Write data in target endianness.
(options, md_longopts): Add -mbig-endian and -mlittle-endian options.
(md_parse_option): Handle the endian options.
* config/tc-riscv.h: Only define TARGET_BYTES_BIG_ENDIAN if not
already defined.
* configure.tgt: Added riscv64be*, riscv32be*, riscvbe*.
ld/
* configure.tgt: Added riscvbe-*-*, riscv32be*-*-*, riscv64be*-*-*,
riscv32be*-*-linux*, and riscv64be*-*-linux*.
* Makefile.am: Added eelf32briscv.c, eelf32briscv_ilp32f.c and
eelf32briscv_ilp32.c.
* Makefile.in: Regenerate.
* emulparams/elf32briscv.sh: Added.
* emulparams/elf32briscv_ilp32.sh: Likewise.
* emulparams/elf32briscv_ilp32f.sh: Likewise.
* emulparams/elf64briscv.sh: Likewise.
* emulparams/elf64briscv_lp64.sh: Likewise.
* emulparams/elf64briscv_lp64f.sh: Likewise.
The xc16x md_apply_fix code is just so broken that in my opinion the
target should never have been accepted, and from a quick look at
commit logs for the target it appears that no one has ever contributed
fixes for anything. This target has just been a 14 year burden on
global binutils and cgen maintainers. That's not how free software is
supposed to work.
bfd/
* config.bfd: Obsolete xc16x.
gas/
* config/tc-xc16x.c (md_apply_fix): Add FIXME.
The PowerPC PE support is so old and bitrotted that it ought to be
removed. Test results for a cross from x86_64 with no C cross
compiler currently shows 109 fails. I don't think anyone cares about
the target.
This FIXME in bfd/peXXigen.c has been around since 1999, git commit
277d1b5e45:
/* FIXME: This file has various tests of POWERPC_LE_PE. Those tests
worked when the code was in peicode.h, but no longer work now that
the code is in peigen.c. PowerPC NT is said to be dead. If
anybody wants to revive the code, you will have to figure out how
to handle those issues. */
and this one in gas/config/tc-ppc.c since 1995, git commit
cd557d83d6:
* FIXME: I just noticed this. This doesn't work at all really. It it
* setting bits that bfd probably neither understands or uses. The
* correct approach (?) will have to incorporate extra fields attached
* to the section to hold the system specific stuff. (krk)
* config.bfd: Obsolete powerpcle-*-pe targets.
The 64-bit version of binutils got support for the PE COFF BIG OBJ format a
couple of years ago. The BIG OBJ format is a slightly different COFF format
which extends the size of the number of section field in the header from a
uint16_t to a uint32_t and so greatly increases the number of sections allowed.
However the 32-bit version of bfd never got support for this. The GHC Haskell
compiler generates a great deal of symbols due to it's use of
-ffunction-sections and -fdata-sections.
This meant that we could not build the 32-bit version of the GHC Compiler for
many releases now as binutils didn't have this support.
This patch adds the support to the 32-bit port of binutils as well and also does
come cleanup in the code.
bfd/ChangeLog:
* coff-i386.c (COFF_WITH_PE_BIGOBJ): New.
* coff-x86_64.c (COFF_WITH_PE_BIGOBJ): New.
* config.bfd (targ_selvecs): Rename x86_64_pe_be_vec
to x86_64_pe_big_vec as it not a big-endian format.
(vec i386_pe_big_vec): New.
* configure.ac: Likewise.
* targets.c: Likewise.
* configure: Regenerate.
* pe-i386.c (TARGET_SYM_BIG, TARGET_NAME_BIG,
COFF_WITH_PE_BIGOBJ): New.
* pe-x86_64.c (TARGET_SYM_BIG, TARGET_NAME_BIG):
New.
(x86_64_pe_be_vec): Moved.
gas/ChangeLog:
* NEWS: Add news entry for big-obj.
* config/tc-i386.c (i386_target_format): Support new format.
* doc/c-i386.texi: Add i386 support.
* testsuite/gas/pe/big-obj.d: Rename test to not be x64 specific.
* testsuite/gas/pe/pe.exp (big-obj): Make test run on i386 as well.
ld/ChangeLog:
* pe-dll.c (pe_detail_list): Add pe-bigobj-i386.
PR 25224
bfd * Makefile.am: Add z80-elf target support.
* configure.ac: Likewise.
* targets.c: Likewise.
* config.bfd: Add z80-elf target support and new arches: ez80 and z180.
* elf32-z80.c: New file.
* archures.c: Add new z80 architectures: eZ80 and Z180.
* coffcode.h: Likewise.
* cpu-z80.c: Likewise.
* bfd-in2.h: Likewise plus additional Z80 relocations.
* coff-z80.c: Add new relocations for Z80 target and local label check.
gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support
for assembler code generated by SDCC. Add new relocation types. Add
z80-elf target support.
* config/tc-z80.h: Add z80-elf target support. Enable dollar local
labels. Local labels starts from ".L".
* testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict.
* testsuite/gas/all/fwdexp.s: Likewise.
* testsuite/gas/z80/suffix.d: Fix failure on ELF target.
* testsuite/gas/z80/z80.exp: Add new tests
* testsuite/gas/z80/dollar.d: New file.
* testsuite/gas/z80/dollar.s: New file.
* testsuite/gas/z80/ez80_adl_all.d: New file.
* testsuite/gas/z80/ez80_adl_all.s: New file.
* testsuite/gas/z80/ez80_adl_suf.d: New file.
* testsuite/gas/z80/ez80_isuf.s: New file.
* testsuite/gas/z80/ez80_z80_all.d: New file.
* testsuite/gas/z80/ez80_z80_all.s: New file.
* testsuite/gas/z80/ez80_z80_suf.d: New file.
* testsuite/gas/z80/r800_extra.d: New file.
* testsuite/gas/z80/r800_extra.s: New file.
* testsuite/gas/z80/r800_ii8.d: New file.
* testsuite/gas/z80/r800_z80_doc.d: New file.
* testsuite/gas/z80/z180.d: New file.
* testsuite/gas/z80/z180.s: New file.
* testsuite/gas/z80/z180_z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.s: New file.
* testsuite/gas/z80/z80_ii8.d: New file.
* testsuite/gas/z80/z80_ii8.s: New file.
* testsuite/gas/z80/z80_in_f_c.d: New file.
* testsuite/gas/z80/z80_in_f_c.s: New file.
* testsuite/gas/z80/z80_op_ii_ld.d: New file.
* testsuite/gas/z80/z80_op_ii_ld.s: New file.
* testsuite/gas/z80/z80_out_c_0.d: New file.
* testsuite/gas/z80/z80_out_c_0.s: New file.
* testsuite/gas/z80/z80_reloc.d: New file.
* testsuite/gas/z80/z80_reloc.s: New file.
* testsuite/gas/z80/z80_sli.d: New file.
* testsuite/gas/z80/z80_sli.s: New file.
ld * Makefile.am: Add new target z80-elf
* configure.tgt: Likewise.
* emultempl/z80.em: Add support for eZ80 and Z180 architectures.
* emulparams/elf32z80.sh: New file.
* emultempl/z80elf.em: Likewise.
* testsuite/ld-z80/arch_ez80_adl.d: Likewise.
* testsuite/ld-z80/arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/arch_r800.d: Likewise.
* testsuite/ld-z80/arch_z180.d: Likewise.
* testsuite/ld-z80/arch_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_z180.d: Likewise.
* testsuite/ld-z80/labels.s: Likewise.
* testsuite/ld-z80/relocs.s: Likewise.
* testsuite/ld-z80/relocs_b_ez80.d: Likewise.
* testsuite/ld-z80/relocs_b_z80.d: Likewise.
* testsuite/ld-z80/relocs_f_z80.d: Likewise.
* testsuite/ld-z80/z80.exp: Likewise.
opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
I think it is past time to remove CR16C support. CR16C was added in
2004, and only for ld. gas and binutils support is lacking, and there
have been no commits to bfd/elf32-cr16c.c other than warning fixes or
global maintainers making changes to all targets. I see no maintainer
listed for CR16C, and no commits from anyone at NSC supporting the
target. Furthermore, at the time the CR16 support was added in 2007,
config.sub was changed upstream to no longer recognise cr16c as a
valid cpu. That means the CR16C ld support is only available as a
secondary target by configuring with, for example,
--enable-targets=all or --enable-targets=cr16c-unknown-elf. No
testing of the CR16C target is possible.
include/
* elf/cr16c.h: Delete.
bfd/
* cpu-cr16c.c: Delete.
* elf32-cr16c.c: Delete.
* Makefile.am,
* archures.c,
* config.bfd,
* configure.ac,
* reloc.c,
* targets.c: Remove cr16c support.
* Makefile.in,
* bfd-in2.h,
* configure,
* libbfd.h,
* po/SRC-POTFILES.in: Regenerate.
ld/
* emulparams/elf32cr16c.sh: Delete.
* scripttempl/elf32cr16c.sc: Delete.
* Makefile.am,
* configure.tgt: Remove cr16c support.
* NEWS: Mention removal of cr16c.
* Makefile.in,
* po/BLD-POTFILES.in: Regenerate.
This patch fixes failures with LTO on mingw32 targets. Since git
commit 7cf7fcc83c all possible targets (minus binary) are matched in
bfd_check_format_matches rather than lower priority targets being
excluded once a higher priority target matches. During linking that
results in the ld/plugin.c plugin_object_p function being called with
the input file xvec set to plugin_vec, which means
plugin_get_ir_dummy_bfd doesn't see the real format of the file
(pe-i386). It defaults to the output format instead, which happens to
be pei-i386, and this wrong choice persists for the dummy bfd.
pei-i386 isn't recognised as a valid linker input file.
So, omit recognizing a plugin object in bfd_check_format_matches when
some other object format matches, and make sure those other object
formats are checked first.
* format.c (bfd_check_format_matches): Don't match plugin target
if another target matches. Expand comment.
* targets.c (_bfd_target_vector): Move plugin_vec after all other
non-corefile targets, outside !SELECT_VECS.
* config.bfd: Don't handle targ=plugin here.
* configure.ac: Don't add plugin to enable_targets or handle in
target loop setting selvecs and other target vars.
* configure: Regenerate.
See also the FIXME. tic30-aout linker support is so bad (and has been
that way since the initial tic30-aout commit) that I'm obsoleting the
target. This patch fixes numerous linker testsuite segmentation faults.
PR 24596
* aout-tic30.c (MY_bfd_final_link): Don't segfault on missing
create_object_symbols_section, obj_textsec, obj_datasec or
obj_bsssec. Fix other errors in placement.
* config.bfd: Obsolete tic30-aout.
This patch avoids for bpf_elf64_le_vec to be referenced in targmatch.h
when building a BFD without BFD64, resulting in an undefined symbol.
This was a regression introduced along with the BPF target.
bfd/ChangeLog:
2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
* config.bfd (targ_cpu): Process bpf-*-none only if BFD64.
* configure.ac: Set target_size=64 for bpf_elf64_le_vec and
bpf_elf64_be_vec.
* configure: Regenerate.
