Alexandre Oliva
38c3873e5d
Speed up locview resolution with relaxable frags
...
Targets such as xtensa incur a much higher overhead to resolve
location view numbers than e.g. x86, because the expressions used to
compute view numbers cannot be resolved soon enough.
Each view number is computed by incrementing the previous view, if
they are both at the same address, or by resetting it to zero
otherwise. If PV is the previous view number, PL is its location, and
NL is the location of the next view, its number is computed by
evaluating NV = !(NL > PL) * (PV + 1).
set_or_check_view uses resolve_expression to decide whether portions
of this expression can be simplified to constants. The (NL > PL)
subexpression is one that can often be resolved to a constant,
breaking chains of view number computations at instructions of nonzero
length, but not after alignment that might be unnecessary.
Alas, when nearly every frag ends with a relaxable instruction,
frag_offset_fixed_p will correctly fail to determine a known offset
between two unresolved addresses in neighboring frags, so the
unresolved symbolic operation will be constructed and used in the
computation of most view numbers. This results in very deep
expressions.
As view numbers get referenced in location view lists, each operand in
the list goes through symbol_clone_if_forward_ref, which recurses on
every subexpression. If each view number were to be referenced, this
would exhibit O(n^2) behavior, where n is the depth of the view number
expressions, i.e., the length of view number sequences without an
early resolution that cuts the expression short.
This patch enables address compares used by view numbering to be
resolved even when exact offsets are not known, using new logic to
determine when the location either remained the same or changed for
sure, even with the possibility of relaxation. This enables most view
number expressions to be resolved with a small, reasonable depth.
PR gas/24444
* frags.c (frag_gtoffset_p): New.
* frags.h (frag_gtoffset_p): Declare it.
* expr.c (resolve_expression): Use it.
2019-04-25 08:35:13 +09:30
Alan Modra
871a6bd2d8
Make frag fr_fix unsigned
...
The field only stores unsigned values, so let's make it unsigned to
stop people worrying about the possibility of negative values.
* frags.h (struct frag <fr_fix>): Use unsigned type.
* frags.c (frag_new): Assert that current size exceeds
old_frags_var_max_size.
* ehopt.c (get_cie_info): Adjust for unsigned fr_fix.
* listing.c (calc_hex): Likewise.
* write.c (cvt_frag_to_fill, write_relocs): Likewise.
* config/tc-arc.c (md_convert_frag): Likewise.
* config/tc-avr.c (avr_patch_gccisr_frag): Likewise.
* config/tc-mips.c (md_convert_frag): Likewise.
* config/tc-rl78.c (md_convert_frag): Likewise.
* config/tc-rx.c (md_convert_frag): Likewise.
* config/tc-sparc.c (md_apply_fix): Likewise.
* config/tc-xtensa.c (next_instrs_are_b_retw): Likewise.
(unrelaxed_frag_min_insn_count, unrelaxed_frag_has_b_j): Likewise.
2019-04-16 17:12:09 +09:30
H.J. Lu
db22231044
gas: Pass max_bytes to TC_FRAG_INIT
...
ommit 3ae729d5a4
2019-02-10 04:34:22 -08:00
Alan Modra
827041555a
Update year range in copyright notice of binutils files
2019-01-01 22:06:53 +10:30
Alan Modra
219d1afa89
Update year range in copyright notice of binutils files
2018-01-03 17:49:56 +10:30
Alan Modra
992a06eea4
gas and ld pluralization fixes
...
gas/
* as.c (main): Properly pluralize messages.
* frags.c (frag_grow): Likewise.
* read.c (emit_expr_with_reloc, emit_expr_fix): Likewise.
(parse_bitfield_cons): Likewise.
* write.c (fixup_segment, compress_debug, write_contents): Likewise.
(relax_segment): Likewise.
* config/tc-arm.c (s_arm_elf_cons): Likewise.
* config/tc-cr16.c (l_cons): Likewise.
* config/tc-i370.c (i370_elf_cons): Likewise.
* config/tc-m68k.c (m68k_elf_cons): Likewise.
* config/tc-msp430.c (msp430_operands): Likewise.
* config/tc-s390.c (s390_elf_cons, s390_literals): Likewise.
* config/tc-mcore.c (md_apply_fix): Likewise.
* config/tc-tic54x.c (md_assemble): Likewise.
* config/tc-xtensa.c (xtensa_elf_cons): Likewise.
(xg_expand_assembly_insn): Likewise.
* config/xtensa-relax.c (build_transition): Likewise.
ld/
* ldlang.c (lang_size_sections_1): Properly pluralize messages.
(lang_check_section_addresses): Likewise.
2017-11-07 17:00:37 +10:30
Alan Modra
2571583aed
Update year range in copyright notice of all files.
2017-01-02 14:08:56 +10:30
Trevor Saunders
3b4dbbbf59
Add more const type qualifiers to GAS sources.
...
* output-file.c (output_file_create): Make file name argument const.
(output_file_close): Likewise.
* output-file.h (output_file_create): Adjust.
(output_file_close): Likewise.
* depend.c (quote_string_for_make): Make src argument const char *.
(register_dependency): Likewise.
(wrap_output): Likewise.
* as.h (register_dependency): Adjust.
* config/tc-xtensa.c (finish_vinsn): Remove unnecessary calls to
as_where ();
* symbols.c (S_SET_EXTERNAL): Likewise.
* input-scrub.c (as_where): Return the file name.
* as.h (as_where): Adjust prototype.
* app.c (do_scrub_chars): Adjust.
* cond.c (s_elseif): Likewise.
(s_else): Likewise.
(initialize_cframe): Likewise.
* config/obj-coff.c (obj_coff_init_stab_section): Likewise.
* config/obj-elf.c (obj_elf_init_stab_section): Likewise.
* config/obj-som.c (obj_som_init_stab_section): Likewise.
* config/tc-aarch64.c (output_info): Likewise.
* config/tc-ia64.c (md_assemble): Likewise.
(dot_alias): Likewise.
* config/tc-m68k.c (m68k_frob_label): Likewise.
* config/tc-mmix.c (s_bspec): Likewise.
(mmix_handle_mmixal): Likewise.
* config/tc-rx.c (rx_include): Likewise.
* config/tc-tic54x.c (tic54x_set_default_include): Likewise.
(tic54x_adjust_symtab): Likewise.
* config/tc-xtensa.c (directive_push): Likewise.
(xtensa_sanity_check): Likewise.
(xtensa_relax_frag): Likewise.
(md_convert_frag): Likewise.
(tinsn_to_slotbuf): Likewise.
* dwarf2dbg.c (dwarf2_where): Likewise.
* ecoff.c (add_file): Likewise.
(ecoff_generate_asm_lineno): Likewise.
* expr.c (make_expr_symbol): Likewise.
* frags.c (frag_new): Likewise.
(frag_var_init): Likewise.
* listing.c (listing_newline): Likewise.
* messages.c (identify): Likewise.
(as_show_where): Likewise.
(as_warn_internal): Likewise.
(as_bad_internal): Likewise.
* read.c (s_irp): Likewise.
(s_macro): Likewise.
(s_reloc): Likewise.
* stabs.c (stabs_generate_asm_file): Likewise.
(stabs_generate_asm_lineno): Likewise.
(stabs_generate_asm_func): Likewise.
* write.c (fix_new_internal): Likewise.
* as.h (PRINTF_WHERE_LIKE): Make file name argument const.
(as_warn_value_out_of_range): Adjust prototype.
(as_bad_value_out_of_range): Adjust prototype.
* messages.c (identify): Make file name argument const char *.
(as_warn_internal): Likewise.
(as_warn_where): Likewise.
(as_bad_internal): Likewise.
(as_bad_where): Likewise.
(as_internal_value_out_of_range): Likewise.
(as_warn_value_out_of_range): Likewise.
(as_bad_value_out_of_range): Likewise.
* as.h (found_comment_file): Change type to const char *.
* cond.c (file_line::file): Likewise.
* config/obj-coff.c (obj_coff_init_stab_section): Make variable const.
* config/obj-elf.c (obj_elf_init_stab_section): Likewise.
* config/obj-som.c (obj_som_init_stab_section): Likewise.
* config/tc-aarch64.c (output_info): Likewise.
* config/tc-alpha.c (insert_operand): Likewise.
* config/tc-arc.c (insert_operand): Likewise.
* config/tc-d30v.c (check_size): Likewise.
* config/tc-ia64.c (struct alias): Likewise.
* config/tc-m68k.c (struct label_line): Likewise.
* config/tc-mcore.c (md_apply_fix): Likewise.
* config/tc-microblaze.c (md_estimate_size_before_relax): Likewise.
* config/tc-mips.c (mips16_immed): Likewise.
* config/tc-mmix.c (mmix_handle_mmixal): Likewise.
* config/tc-ppc.c (ppc_insert_operand): Likewise.
* config/tc-rx.c (rx_include): Likewise.
* config/tc-s390.c (s390_insert_operand): Likewise.
* config/tc-tic54x.c (tic54x_set_default_include): Likewise.
(tic54x_adjust_symtab): Likewise.
* config/tc-tilegx.c (insert_operand): Likewise.
(apply_special_operator): Likewise.
* config/tc-tilepro.c (insert_operand): Likewise.
* config/tc-xtensa.c (directive_push): Likewise.
* ecoff.c (add_file): Likewise.
(ecoff_generate_asm_lineno): Likewise.
* listing.c (listing_newline): Likewise.
* read.c (s_irp): Likewise.
* write.c (install_reloc): Likewise.
* write.h (struct fix): Likewise.
* input-file.c (file_name): Change type to const char *.
(saved_file::file_name): Likewise.
(input_file_open): Change type of argument to const char *.
* input-file.h (input_file_open): Adjust.
* input-scrub.c (logical_input_file): change type to const char *.
(physical_input_file): Likewise.
(struct input_save): Adjust.
(input_scrub_push): Adjust.
(input_scrub_begin): Adjust.
(as_where): Adjust.
* input-scrub.c (input_scrub_new_file): Make file name argument const.
(input_scrub_include_file): Likewise.
(new_logical_line_flags): Likewise.
(new_logical_line): Likewise.
* as.h: Adjust.
* frags.h (struct frag): Change type of fr_file to const char *.
* expr.c (expr_symbol_where): Change type of file argument to
const char **.
* expr.h (expr_symbol_where): Likewise.
* config/tc-i370.c (md_apply_fix): adjust.
* config/tc-mmix.c (mmix_md_end): Likewise.
* config/tc-ppc.c (md_apply_fix): Likewise.
* config/tc-s390.c (md_apply_fix): Likewise.
* symbols.c (report_op_error): Likewise.
(resolve_symbol_value): Likewise.
* config/tc-ia64.c (slot::src_file): Change type to const char *.
(rsrc::file): Likewise.
* config/tc-xtensa.c (xtensa_sanity_check): Change type of variable to
const char *.
(xtensa_relax_frag): Likewise.
(md_convert_frag): Likewise.
(tinsn_to_slotbuf): Likewise.
* expr.c (expr_symbol_line): Likewise.
* macro.c (define_macro): Likewise.
* macro.h (macro_struct): Likewise.
* messages.c (as_show_where): Likewise.
* read.c (s_macro): Likewise.
* stabs.c (stabs_generate_asm_file): Likewise.
(generate_asm_file): Likewise.
(stabs_generate_asm_lineno): Likewise.
* write.h (struct reloc_list): Likewise.
* input-scrub.c (as_where): Change return type to const char *.
* as.h (as_wheree): Adjust.
2016-02-22 14:11:27 +00:00
Alan Modra
6f2750feaf
Copyright update for binutils
2016-01-01 23:00:01 +10:30
Alan Modra
b90efa5b79
ChangeLog rotatation and copyright year update
2015-01-02 00:53:45 +10:30
Alan Modra
ed9e98c214
Don't use register keyword
...
* expr.c (expr_symbol_where): Don't use register keyword.
* app.c (app_push, app_pop, do_scrub_chars): Likewise.
* ecoff.c (add_string, add_ecoff_symbol, add_aux_sym_symint,
add_aux_sym_rndx, add_aux_sym_tir, add_procedure, add_file,
ecoff_build_lineno, ecoff_setup_ext, allocate_cluster.
allocate_scope, allocate_vlinks, allocate_shash,
allocate_thash, allocate_tag, allocate_forward, allocate_thead,
allocate_lineno_list): Likewise.
* frags.c (frag_more, frag_var, frag_variant, frag_wane): Likewise.
* input-file.c (input_file_push, input_file_pop): Likewise.
* input-scrub.c (input_scrub_push, input_scrub_next_buffer): Likewise.
* subsegs.c (subseg_change): Likewise.
* symbols.c (colon, symbol_table_insert, symbol_find_or_make)
(dollar_label_name, fb_label_name): Likewise.
* write.c (relax_align): Likewise.
* config/tc-alpha.c (s_alpha_pdesc): Likewise.
* config/tc-bfin.c (bfin_s_bss): Likewise.
* config/tc-i860.c (md_estimate_size_before_relax): Likewise.
* config/tc-m68hc11.c (md_convert_frag): Likewise.
* config/tc-m68k.c (m68k_ip, crack_operand): Likewise.
(md_convert_frag_1, s_even): Likewise.
* config/tc-mips.c (mips_clear_insn_labels): Likewise.
* config/tc-mn10200.c (md_begin): Likewise.
* config/tc-s390.c (s390_setup_opcodes, md_begin): Likewise.
* config/tc-sh.c (sh_elf_cons): Likewise.
* config/tc-tic4x.c (tic4x_cons, tic4x_stringer): Likewise.
* config/m68k-parse.y (m68k_reg_parse): Likewise. Convert from K&R.
(yylex, m68k_ip_op, yyerror): Convert from K&R.
2014-11-04 22:40:45 +10:30
Alan Modra
e57e6ddc2e
Prepare gas for 64-bit obstacks
...
Use size_t in a few places involved with obstacks, and don't include
obstack.h in files that don't use obstacks.
gas/
* config/bfin-parse.y: Don't include obstack.h.
* config/obj-aout.c: Likewise.
* config/obj-coff.c: Likewise.
* config/obj-som.c: Likewise.
* config/tc-bfin.c: Likewise.
* config/tc-i960.c: Likewise.
* config/tc-rl78.c: Likewise.
* config/tc-rx.c: Likewise.
* config/tc-tic4x.c: Likewise.
* expr.c: Likewise.
* listing.c: Likewise.
* config/obj-elf.c (elf_file_symbol): Make name_length a size_t.
* config/tc-aarch64.c (symbol_locate): Likewise.
* config/tc-arm.c (symbol_locate): Likewise.
* config/tc-mmix.c (mmix_handle_mmixal): Make len_0 a size_t.
* config/tc-score.c (s3_build_score_ops_hsh): Make len a size_t.
(s3_build_dependency_insn_hsh): Likewise.
* config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
(s7_build_dependency_insn_hsh): Likewise.
* frags.c (frag_grow): Make parameter a size_t, and use size_t locals.
(frag_new): Make parameter a size_t.
(frag_var_init): Make max_chars and var parameters size_t.
(frag_var, frag_variant): Likewise.
(frag_room): Return a size_t.
(frag_align_pattern): Make n_fill parameter a size_t.
* frags.h: Update function prototypes.
* symbols.c (save_symbol_name): Make name_length a size_t.
2014-07-26 21:00:50 +09:30
David Weatherford
a82c7d9030
Add support to the Xtensa target for creating trampolines for out-of-range branches.
...
* tc-xtensa.c (xtensa_check_frag_count, xtensa_create_trampoline_frag)
(xtensa_maybe_create_trampoline_frag, init_trampoline_frag)
(find_trampoline_seg, search_trampolines, get_best_trampoline)
(check_and_update_trampolines, add_jump_to_trampoline)
(dump_trampolines): New function.
(md_parse_option): Add cases for --[no-]trampolines options.
(md_assemble, finish_vinsn, xtensa_end): Add call to
xtensa_check_frag_count.
(xg_assemble_vliw_tokens): Add call to
xtensa_maybe_create_trampoline_frag.
(xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state.
(relax_frag_immed): Relax jump instructions that cannot reach its
target.
* tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New relax
state.
* as.texinfo: Document --[no-]trampolines command-line options.
* c-xtensa.texi: Document trampolines relaxation and command line
options.
* frags.c (get_frag_count, clear_frag_count): New function.
(frag_alloc): Increment totalfrags counter.
* frags.h (get_frag_count, clear_frag_count): New function.
* all.exp: Add test for trampoline relaxation.
* trampoline.d: Trampoline relaxation expected dump.
* trampoline.s: Trampoline relaxation test source.
2014-03-21 11:53:42 +00:00
Alan Modra
4b95cf5c0c
Update copyright years
2014-03-05 22:16:15 +10:30
Maciej W. Rozycki
3db8daf394
* frags.c (frag_grow): Never shrink the obstack size requested
...
below the default.
2012-08-03 22:23:44 +00:00
Alan Modra
08ea70204d
* frags.h (frag_offset_fixed_p): Update prototype.
...
* frags.c (frag_offset_fixed_p): Change type of "offset" to offsetT.
* expr.c (expr, resolve_expression): Likewise for frag_off var.
2012-06-30 00:27:31 +00:00
Alan Modra
6885131b49
* as.c (main): Define .gasversion. rather than __GAS_VERSION__.
...
* frags.h (bss_address_frag): Delete
(predefined_address_frag): New.
* frags.c (frag_init): Init predefined_address_frag. Delete ref
to bss_addres_frag.
* symbols.c (S_CAN_BE_REDEFINED): New function.
* symbols.h (S_CAN_BE_REDEFINED): Declare.
* read.c (assign_symbol): Use S_CAN_BE_REDEFINED.
2011-10-12 21:07:07 +00:00
Tristan Gingold
8d8385cfb8
2011-08-01 Tristan Gingold <gingold@adacore.com>
...
* frags.c (frag_grow): Simplify the code.
2011-08-01 08:05:49 +00:00
Tristan Gingold
69b1d6052d
2011-07-29 Tristan Gingold <gingold@adacore.com>
...
* frags.c (frag_var_init): New function.
(frag_var): Call frag_var_init to initialize.
(frag_variant): Ditto.
2011-07-29 07:34:14 +00:00
Tristan Gingold
088b3cd0ce
2011-07-27 Tristan Gingold <gingold@adacore.com>
...
* frags.c (frag_grow): Revert previous patch.
2011-07-27 06:54:12 +00:00
Tristan Gingold
179809c050
2011-07-25 Tristan Gingold <gingold@adacore.com>
...
* frags.c (frag_grow): Simplify the code.
2011-07-25 13:34:40 +00:00
Nick Clifton
1e9cc1c27b
* po/bfd.pot: Updated by the Translation project.
...
* po/binutils.pot: Updated by the Translation project.
* po/gold.pot: Updated by the Translation project.
* po/gold.pot: Updated by the Translation project.
* po/gprof.pot: Updated by the Translation project.
* po/sv.po: Updated Swedish translation.
* po/ld.pot: Updated by the Translation project.
* po/fi.po: Updated Finnish translation.
* po/ld.pot: Updated by the Translation project.
* po/fi.po: Updated Finnish translation.
Updated sources to compile cleanly with -Wc++-compat:
* basic_blocks.c: Add casts.
* cg_dfn.c: Add cast.
* corefile.c: Add casts.
* gmon_io.c: Add casts.
* hist.c: Add cast.
* source.c: Add cast.
* sym_ids.c (struct match): Moved to top level.
Updated soruces in ld/* to compile cleanly with -Wc++-compat:
* ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
* ldcref.c: Add casts.
* ldctor.c: Add casts.
* ldexp.c
* ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
* ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
* ldlang.h (enum statement_enum): Move to top level.
* ldmain.c: Add casts.
* ldwrite.c: Add casts.
* lexsup.c: Add casts. (enum control_enum): Move to top level.
* mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
Updated sources to compile cleanly with -Wc++-compat:
* basic_blocks.c: Add casts.
* cg_dfn.c: Add cast.
* corefile.c: Add casts.
* gmon_io.c: Add casts.
* hist.c: Add cast.
* source.c: Add cast.
* sym_ids.c (struct match): Moved to top level.
* as.c (main): Call dwarf2_init.
* config/obj-elf.c (struct group_list): New field.
(build_group_lists): Use hash lookup.
(free_section_idx): New function.
(elf_frob_file): Adjust.
* dwarf2dbg.c (all_segs_hash, last_seg_ptr): New variables.
(get_line_subseg): Adjust.
(dwarf2_init): New function.
* dwarf2dbg.h (dwarf2_init): New declaration.
2009-09-11 15:27:38 +00:00
Alan Modra
aa820537ea
update copyright dates
2009-09-02 07:25:43 +00:00
Nick Clifton
9c2799c243
* gas/app, gas/as.c, gas/as.h, gas/atof-generic.c, gas/cgen.c,
...
gas/config/atof-ieee.c, gas/config/obj-aout.c,
gas/config/obj-coff.c, gas/config/obj-ecoff.c,
gas/config/obj-elf.c, gas/config/obj-som.c, gas/config/tc-alpha.c,
gas/config/tc-arc.c, gas/config/tc-arm.c, gas/config/tc-cr16.c,
gas/config/tc-cris.c, gas/config/tc-crx.c, gas/config/tc-d30v.c,
gas/config/tc-dlx.c, gas/config/tc-hppa.c, gas/config/tc-i370.c,
gas/config/tc-i386-intel.c, gas/config/tc-i386.c,
gas/config/tc-i860.c, gas/config/tc-i960.c, gas/config/tc-ia64.c,
gas/config/tc-iq2000.c, gas/config/tc-m32c.c,
gas/config/tc-m32r.c, gas/config/tc-m68hc11.c,
gas/config/tc-m68k.c, gas/config/tc-maxq.c, gas/config/tc-mcore.c,
gas/config/tc-mep.c, gas/config/tc-mips.c, gas/config/tc-mmix.c,
gas/config/tc-mn10300.c, gas/config/tc-moxie.c,
gas/config/tc-ns32k.c, gas/config/tc-pj.c, gas/config/tc-ppc.c,
gas/config/tc-s390.c, gas/config/tc-score.c,
gas/config/tc-score7.c, gas/config/tc-sh.c, gas/config/tc-sparc.c,
gas/config/tc-spu.c, gas/config/tc-tic30.c, gas/config/tc-vax.c,
gas/config/tc-xtensa.c, gas/config/xtensa-relax.c,
gas/dw2gencfi.c, gas/dwarf2dbg.c, gas/ehopt.c, gas/expr.c,
gas/frags.c, gas/input-file.c, gas/read.c, gas/sb.c,
gas/subsegs.c, gas/symbols.c, gas/write.c: Change the name of the
gas macro `assert' to `gas_assert'.
2009-06-22 17:56:02 +00:00
Alan Modra
78aff5a527
Remove unnecessary casts on obstack_alloc invocations.
2008-10-21 00:26:17 +00:00
Nick Clifton
ec2655a6a7
Switch to GPLv3
2007-07-03 11:01:12 +00:00
Alan Modra
6cbe03fb0f
* frags.c (frag_offset_fixed_p): Constify args.
...
* frags.h (frag_offset_fixed_p): Ditto.
2006-04-18 09:58:26 +00:00
Alan Modra
ec651a3b25
* frags.c (frag_offset_fixed_p): Reinitialise offset before
...
second scan.
2006-04-06 04:38:33 +00:00
Alan Modra
9963077898
PR 997
...
* frags.c (frag_offset_fixed_p): New function.
* frags.h (frag_offset_fixed_p): Declare.
* expr.c (expr): Use frag_offset_fixed_p when simplifying subtraction.
(resolve_expression): Likewise.
2006-04-04 08:04:57 +00:00
Michael Matz
ee1923668e
gas/
...
* frags.c (frag_grow): Don't be too greedy in allocating memory.
* config/tc-hppa.c (pa_block): Check arguments to .block[z].
gas/testsuite/
* gas/hppa/parse/block1.s: Use official limit (0x3fffffff) for
.block.
2005-05-10 15:10:08 +00:00
Nick Clifton
4b4da1607a
Update the address and phone number of the FSF
2005-05-05 09:13:19 +00:00
Alan Modra
2da5c03714
update copyright dates
2005-03-03 01:29:54 +00:00
Richard Sandiford
0530d30a58
* frags.h (frag_room): Declare.
...
* frags.c (frag_room): New function.
* doc/internals.texi: Document it.
2004-01-23 12:52:20 +00:00
Kazu Hirata
dd625418be
* ehopt.c: Convert to ISO-C.
...
* emul.h: Likewise.
* expr.c: Likewise.
* expr.h: Likewise.
* flonum-copy.c: Likewise.
* flonum-mult.c: Likewise.
* flonum.h: Likewise.
* frags.c: Likewise.
* frags.h: Likewise.
2003-11-22 16:03:03 +00:00
Alan Modra
e85ca5bb79
* frags.c (frag_more): Move segment checks to..
...
(frag_alloc_check): ..here. New function.
(frag_append_1_char): Call frag_alloc_check.
2003-07-15 01:33:54 +00:00
Alan Modra
33861b119a
revert last change.
2001-11-15 09:16:46 +00:00
Nick Clifton
c1a44b0823
Use frag_make_room() to grow the obstack.
2001-11-14 17:43:32 +00:00
Alan Modra
0e389e770d
* read.c: Standardize error/warning messages - don't capitalise, no
...
final period or newline, don't say "ignored" or "zero assumed" for
as_bad messages. In some cases, change the wording to that used
elsewhere for similar messages.
* app.c, as.c, atof-generic.c, cgen.c, cond.c, depend.c, dwarf2dbg.c,
ecoff.c, expr.c, frags.c, input-file.c, input-scrub.c, listing.c,
output-file.c, stabs.c, subsegs.c, symbols.c, write.c: Likewise.
* ecoff.c (ecoff_directive_end): Test for missing name by
comparing input line pointers rather than reading string.
(ecoff_directive_ent): Likewise.
* read.c (s_set): Likewise.
(s_align): Report a warning rather than an error for
alignment too large.
(s_comm): Check for missing symbol name.
(s_lcomm_internal): Likewise.
(s_lsym): Likewise.
(s_globl): Use is_end_of_line instead of looking for '\n'.
(s_lcomm_internal): Likewise.
(ignore_rest_of_line): Report a warning rather than an error.
2001-08-01 01:44:25 +00:00
Nick Clifton
f7e42eb4af
Fix copyright notices
2001-03-08 23:24:26 +00:00
Richard Henderson
0a9ef43907
* as.h (rs_align_test): New.
...
* frags.c (NOP_OPCODE): Move default from read.c.
(MAX_MEM_FOR_RS_ALIGN_CODE): New default.
(frag_align_code): New.
* frags.h (frag_align_code): Declare.
* read.c (NOP_OPCODE): Remove.
(do_align): Use frag_align_code.
* write.c (NOP_OPCODE): Remove.
(get_recorded_alignment): New.
(cvt_frag_to_fill): Handle rs_align_test.
(relax_segment): Likewise.
(subsegs_finish): Align last subseg in section to the
section alignment. Use frag_align_code.
* write.h (get_recorded_alignment): Declare.
* config/obj-coff.c (size_section): Handle rs_align_test.
(fill_section, fixup_mdeps): Likewise.
(write_object_file): Use frag_align_code.
* config/tc-alpha.c (alpha_align): Use frag_align_code.
(alpha_handle_align): New.
* config/tc-alpha.h (HANDLE_ALIGN): New.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-i386.h (md_do_align): Use frag_align_code.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-ia64.c (ia64_md_do_align): Don't do code alignment.
(ia64_handle_align): New.
* config/tc-ia64.h (HANDLE_ALIGN): New.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-m32r.c (m32r_do_align): Remove.
(m32r_handle_align): New.
(fill_insn): Use frag_align_code.
* config/tc-m32r.h (md_do_align): Remove.
(HANDLE_ALIGN, MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-m88k.c, config/tc-m88k.h: Similarly.
* config/tc-mips.c, config/tc-mips.h: Similarly.
* config/tc-sh.c (sh_cons_align): Use rs_align_test.
(sh_handle_align): Likewise. Handle rs_align_code.
(sh_do_align): Remove.
* config/tc-sh.h (md_do_align): Remove.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-sparc.c (sparc_cons_align): Use rs_align_test.
(sparc_handle_align): Likewise. Handle rs_align_code.
* config/tc-sparc.h (md_do_align): Remove.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
2000-12-28 10:07:56 +00:00
Kazu Hirata
29f8404ce7
2000-08-31 Kazu Hirata <kazu@hxi.com>
...
* frags.c: Fix formatting.
* macro.c: Likewise.
2000-08-31 18:36:18 +00:00
Alan Modra
65e68b04b1
Correct absolute section alignment.
2000-07-22 04:23:48 +00:00
Alan Modra
5a327c7ac2
Missed copyright update in last patch.
2000-05-23 05:07:47 +00:00
Alan Modra
ee7fcc42b1
Pass jump reloc in fr_var so it can be used in
...
md_estimate_size_before_relax, replacing old kludge.
2000-05-23 04:48:21 +00:00
Alan Modra
3f9b03b5da
Assorted code cleanup and fixes for hppa. Re-enable elf32-hppa as
...
it now compiles even if it doesn't work too well.
2000-05-02 00:12:52 +00:00
Timothy Wall
bea9907b2a
octets vs bytes changes for GAS
2000-02-03 18:20:23 +00:00
Richard Henderson
252b5132c7
19990502 sourceware import
1999-05-03 07:29:11 +00:00
