bfcvt converts a .S input to a .H output, so any predicated movprfx
needs to operate on .S rather than .H. In common with SVE2 narrowing
top operations, bfcvtnt doesn't accept movprfx.
2020-01-31 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-tbl.h (aarch64_opcode): Set C_MAX_ELEM for SVE bfcvt.
Remove C_SCAN_MOVPRFX for SVE bfcvtnt.
gas/
* testsuite/gas/aarch64/sve-bfloat-movprfx.s: Use .h rather than
.s for the movprfx.
* testsuite/gas/aarch64/sve-bfloat-movprfx.d: Update accordingly.
* testsuite/gas/aarch64/sve-movprfx_28.d,
* testsuite/gas/aarch64/sve-movprfx_28.l,
* testsuite/gas/aarch64/sve-movprfx_28.s: New test.
This fixes the preferred disassembly for cfinv. The Armv8.4-a instruction
overlaps with the possible encoding space for msr. This because msr allows you
to use unallocated encoding space using the general sA_B_cC_cD_E form.
However when an encoding does become allocated then we need to ensure that it's
used as the preferred disassembly. The problem with cfinv is that its mask has
all bits sets because it has no arguments.
This causes issues for the Alias resolver in gas as it uses the mask to build
alias graph. In this case it can't do it since it thinks almost everything
would alias with cfinv. So instead we can only fix this by moving cfinv before
msr.
gas/ChangeLog:
PR 25403
* testsuite/gas/aarch64/armv8_4-a.d: Add cfinv.
* testsuite/gas/aarch64/armv8_4-a.s: Likewise.
opcodes/ChangeLog:
PR 25403
* aarch64-tbl.h (struct aarch64_opcode): Re-order cfinv.
* aarch64-asm-2.c: Regenerate
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
According to the specification these permit the Q bit to control the
vector length operated on, and hence this bit should not already be set
in the opcode table entries (it rather needs setting dynamically). Note
how the test case output did also not match its input. Besides
correcting the test case also extend it to cover both forms.
This, at the assembler level, is just a "brace" feature covering both
AES and SHA2. Hence there's no need for it to have a separate feature
flag, freeing up a bit for future re-use. Along these lines there are
also a number of dead definitions/variables in the opcode table file.
Hi,
This patch is part of a series that adds support for Armv8.6-A
to binutils.
In this last patch, the new Data Gathering Hint mnemonic is introduced.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* testsuite/gas/aarch64/dgh.s: New test.
* testsuite/gas/aarch64/dgh.d: New test.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcodes/aarch64-tbl.h (V8_6_INSN): New macro for v8.6 instructions.
(aarch64_opcode_table): Add data gathering hint mnemonic.
* opcodes/aarch64-dis-2.c: Account for new instruction.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the Matrix Multiply (Int8, F32, F64) extensions
to the aarch64 backend.
The following instructions are added: {s/u}mmla, usmmla, {us/su}dot,
fmmla, ld1rob, ld1roh, d1row, ld1rod, uzip{1/2}, trn{1/2}.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-aarch64.c: Add new arch fetures to suppport the mm extension.
(parse_operands): Add new operand.
* testsuite/gas/aarch64/i8mm.s: New test.
* testsuite/gas/aarch64/i8mm.d: New test.
* testsuite/gas/aarch64/f32mm.s: New test.
* testsuite/gas/aarch64/f32mm.d: New test.
* testsuite/gas/aarch64/f64mm.s: New test.
* testsuite/gas/aarch64/f64mm.d: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.s: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_I8MM): New.
(AARCH64_FEATURE_F32MM): New.
(AARCH64_FEATURE_F64MM): New.
(AARCH64_OPND_SVE_ADDR_RI_S4x32): New.
(enum aarch64_insn_class): Add new instruction class "aarch64_misc" for
instructions that do not require special handling.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* aarch64-tbl.h (aarch64_feature_i8mm_sve, aarch64_feature_f32mm_sve,
aarch64_feature_f64mm_sve, aarch64_feature_i8mm, aarch64_feature_f32mm,
aarch64_feature_f64mm): New feature sets.
(INT8MATMUL_INSN, F64MATMUL_SVE_INSN, F64MATMUL_INSN,
F32MATMUL_SVE_INSN, F32MATMUL_INSN): New macros to define matrix multiply
instructions.
(I8MM_SVE, F32MM_SVE, F64MM_SVE, I8MM, F32MM, F64MM): New feature set
macros.
(QL_MMLA64, OP_SVE_SBB): New qualifiers.
(OP_SVE_QQQ): New qualifier.
(INT8MATMUL_SVE_INSNC, F64MATMUL_SVE_INSNC,
F32MATMUL_SVE_INSNC): New feature set for bfloat16 instructions to support
the movprfx constraint.
(aarch64_opcode_table): Support for SVE_ADDR_RI_S4x32.
(aarch64_opcode_table): Define new instructions smmla,
ummla, usmmla, usdot, sudot, fmmla, ld1rob, ld1roh, ld1row, ld1rod
uzip{1/2}, trn{1/2}.
* aarch64-opc.c (operand_general_constraint_met_p): Handle
AARCH64_OPND_SVE_ADDR_RI_S4x32.
(aarch64_print_operand): Handle AARCH64_OPND_SVE_ADDR_RI_S4x32.
* aarch64-dis-2.c (aarch64_opcode_lookup_1, aarch64_find_next_opcode):
Account for new instructions.
* opcodes/aarch64-asm-2.c (aarch64_insert_operand): Support the new
S4x32 operand.
* aarch64-opc-2.c (aarch64_operands): Support the new S4x32 operand.
Regression tested on arm-none-eabi.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the following BFloat16 instructions to the
aarch64 backend: bfdot, bfmmla, bfcvt, bfcvtnt, bfmlal[t/b],
bfcvtn2.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (vectype_to_qualifier): Special case the
S_2H operand qualifier.
* doc/c-aarch64.texi: Document bf16 and bf16mmla4 extensions.
* testsuite/gas/aarch64/bfloat16.d: New test.
* testsuite/gas/aarch64/bfloat16.s: New test.
* testsuite/gas/aarch64/illegal-bfloat16.d: New test.
* testsuite/gas/aarch64/illegal-bfloat16.l: New test.
* testsuite/gas/aarch64/illegal-bfloat16.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_BFLOAT16): New feature macros.
(AARCH64_ARCH_V8_6): Include BFloat16 feature macros.
(enum aarch64_opnd_qualifier): Introduce new operand qualifier
AARCH64_OPND_QLF_S_2H.
(enum aarch64_insn_class): Introduce new class "bfloat16".
(BFLOAT16_SVE_INSNC): New feature set for bfloat16
instructions to support the movprfx constraint.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_ins_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-dis-2.c (aarch64_opcode_lookup_1,
aarch64_find_next_opcode): Account for new instructions.
* aarch64-dis.c (aarch64_ext_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-opc.c (struct operand_qualifier_data): Add data for
new AARCH64_OPND_QLF_S_2H qualifier.
* aarch64-tbl.h (QL_BFDOT QL_BFDOT64, QL_BFDOT64I, QL_BFMMLA2,
QL_BFCVT64, QL_BFCVTN64, QL_BFCVTN2_64): New qualifiers.
(aarch64_feature_bfloat16, aarch64_feature_bfloat16_sve,
aarch64_feature_bfloat16_bfmmla4): New feature sets.
(BFLOAT_SVE, BFLOAT): New feature set macros.
(BFLOAT_SVE_INSN, BFLOAT_BFMMLA4_INSN, BFLOAT_INSN): New macros
to define BFloat16 instructions.
(aarch64_opcode_table): Define new instructions bfdot,
bfmmla, bfcvt, bfcvtnt, bfdot, bfdot, bfcvtn, bfmlal[b/t]
bfcvtn2, bfcvt.
Regression tested on aarch64-elf.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
to binutils.
This first patch adds the Armv8.6-A flag to binutils.
No instructions are behind it at the moment.
Commited on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (armv8.6-a): New arch.
* doc/c-aarch64.texi (armv8.6-a): Document new arch.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_6): New.
(AARCH64_ARCH_V8_6): New.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-tbl.h (ARMV8_6): New macro.
Is it ok for trunk?
Regards,
Mihail
This is a shorthand for the immediate argument being 0, as described here:
https://developer.arm.com/docs/ddi0596/latest/base-instructions-alphabetic-order/ldraa-ldrab-load-register-with-pointer-authentication
This is because the instructions still have a use with an immediate
argument of 0, unlike loads without the PAC functionality. Currently,
the mnemonics are
LDRAA Xt, [Xn, #<simm10>]!
LDRAB Xt, [Xn, #<simm10>]!
After this patch they become
LDRAA Xt, [Xn {, #<simm10>}]!
LDRAB Xt, [Xn {, #<simm10>}]!
gas * config/tc-aarch64.c (parse_address_main): Accept the omission of
the immediate argument for ldraa and ldrab as a shorthand for the
immediate being 0.
* testsuite/gas/aarch64/ldraa-ldrab-no-offset.d: New test.
* testsuite/gas/aarch64/ldraa-ldrab-no-offset.s: New test.
* testsuite/gas/aarch64/illegal-ldraa.s: Modified to accept the
writeback form with no offset.
* testsuite/gas/aarch64/illegal-ldraa.s: Removed missing offset
error.
opcodes * aarch64-opc.c (print_immediate_offset_address): Don't print the
immediate for the writeback form of ldraa/ldrab if it is 0.
* aarch64-tbl.h: Updated the documentation for ADDR_SIMM10.
* aarch64-opc-2.c: Regenerated.
The entry for the FMOV alias of FCPY was missing C_SCAN_MOVPRFX.
(The entry for FCPY itself was OK.)
This was the only /m-predicated instruction I could see that was
missing the flag.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-tbl.h (aarch64_opcode): Set C_SCAN_MOVPRFX for the
SVE FMOV alias of FCPY.
gas/
* testsuite/gas/aarch64/sve-movprfx_27.s,
* testsuite/gas/aarch64/sve-movprfx_27.d: New test.
SVE FCVTZS, FCVTZU, SCVTF and UCVTF need the same treatment as FCVT:
the register size used in a predicated MOVPRFX must be the wider of
the destination and source sizes.
Since I was adding a (supposedly) complete set of tests for converts,
it seemed more consistent to add a complete set of tests for shifts
as well, even though there's no bug to fix there.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-tbl.h (aarch64_opcode_table): Add C_MAX_ELEM flags
to SVE fcvtzs, fcvtzu, scvtf and ucvtf entries.
gas/
* testsuite/gas/aarch64/sve-movprfx_26.s: Also test FCVTZS, FCVTZU,
SCVTF, UCVTF, LSR and ASR.
* testsuite/gas/aarch64/sve-movprfx_26.d: Update accordingly.
* testsuite/gas/aarch64/sve-movprfx_26.l: Likewise.
I had mistakenly given all variants of the new SVE2 instructions
pmull{t,b} a dependency on the feature +sve2-aes.
Only the variant specifying .Q -> .D sizes should have that
restriction.
This patch fixes that mistake and updates the testsuite to have extra
tests (matching the given set of tests per line in aarch64-tbl.h that
the rest of the SVE2 tests follow).
We also add a line in the documentation of the command line to clarify
how to enable `pmull{t,b}` of this larger size. This is needed because
all other instructions gated under the `sve2-aes` architecture extension
are marked in the instruction documentation by an `HaveSVE2AES` check
while pmull{t,b} is gated under the `HaveSVE2PMULL128` check.
Regtested targeting aarch64-linux.
gas/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* testsuite/gas/aarch64/illegal-sve2-aes.d: Update tests.
* testsuite/gas/aarch64/illegal-sve2.l: Update tests.
* doc/c-aarch64.texi: Add special note of pmull{t,b}
instructions under the sve2-aes architecture extension.
* testsuite/gas/aarch64/illegal-sve2.s: Add small size
pmull{t,b} instructions.
* testsuite/gas/aarch64/sve2.d: Add small size pmull{t,b}
disassembly.
* testsuite/gas/aarch64/sve2.s: Add small size pmull{t,b}
instructions.
include/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_insn_class): sve_size_013
renamed to sve_size_13.
opcodes/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_encode_variant_using_iclass): Use new
sve_size_13 icode to account for variant behaviour of
pmull{t,b}.
* aarch64-dis-2.c: Regenerate.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Use new
sve_size_13 icode to account for variant behaviour of
pmull{t,b}.
* aarch64-tbl.h (OP_SVE_VVV_HD_BS): Add new qualifier.
(OP_SVE_VVV_Q_D): Add new qualifier.
(OP_SVE_VVV_QHD_DBS): Remove now unused qualifier.
(struct aarch64_opcode): Split pmull{t,b} into those requiring
AES and those not.
This patch adds all the SVE2 instructions and their associated qualifier
sets.
Ok for trunk?
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-dis-2.c: Regenerate.
* aarch64-tbl.h (OP_SVE_BBU): New variant set.
(OP_SVE_BBB): New variant set.
(OP_SVE_DDDD): New variant set.
(OP_SVE_HHH): New variant set.
(OP_SVE_HHHU): New variant set.
(OP_SVE_SSS): New variant set.
(OP_SVE_SSSU): New variant set.
(OP_SVE_SHH): New variant set.
(OP_SVE_SBBU): New variant set.
(OP_SVE_DSS): New variant set.
(OP_SVE_DHHU): New variant set.
(OP_SVE_VMV_HSD_BHS): New variant set.
(OP_SVE_VVU_HSD_BHS): New variant set.
(OP_SVE_VVVU_SD_BH): New variant set.
(OP_SVE_VVVU_BHSD): New variant set.
(OP_SVE_VVV_QHD_DBS): New variant set.
(OP_SVE_VVV_HSD_BHS): New variant set.
(OP_SVE_VVV_HSD_BHS2): New variant set.
(OP_SVE_VVV_BHS_HSD): New variant set.
(OP_SVE_VV_BHS_HSD): New variant set.
(OP_SVE_VVV_SD): New variant set.
(OP_SVE_VVU_BHS_HSD): New variant set.
(OP_SVE_VZVV_SD): New variant set.
(OP_SVE_VZVV_BH): New variant set.
(OP_SVE_VZV_SD): New variant set.
(aarch64_opcode_table): Add sve2 instructions.
New operand describes a shift-left immediate encoded in bits
22:20-19:18-16 where UInt(bits) - esize == shift.
This operand is useful for instructions like sshllb.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_SHLIMM_UNPRED_22
operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_SHLIMM_UNPRED_22
operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_SHLIMM_UNPRED_22.
(aarch64_print_operand): Add printing for SVE_SHLIMM_UNPRED_22.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHLIMM_UNPRED_22
operand.
This includes defining a new single bit field SVE_i2h at position 20.
SVE_Zm4_11_INDEX handles indexed Zn registers where the index is encoded
in bits 20:11 and the register is chosed from range z0-z15 in bits 19-16.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_Zm4_11_INDEX
operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_Zm4_11_INDEX operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_Zm4_11_INDEX.
(aarch64_print_operand): Add printing for SVE_Zm4_11_INDEX.
(fields): Handle SVE_i2h field.
* aarch64-opc.h (enum aarch64_field_kind): New SVE_i2h field.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm4_11_INDEX operand.
Include a new iclass to extract the variant from the most significant 3
bits of this operand.
Instructions such as rshrnb include a constant shift amount as an
operand, where the most significant three bits of this operand determine
what size elements the instruction is operating on.
The new SVE_SHRIMM_UNPRED_22 operand denotes this constant encoded in
bits 22:20-19:18-16 while the new sve_shift_tsz_hsd iclass denotes that
the SVE qualifier is encoded in bits 22:20-19.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_SHRIMM_UNPRED_22
operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_SHRIMM_UNPRED_22
operand.
(enum aarch64_insn_class): Add sve_shift_tsz_hsd iclass.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-asm.c (aarch64_ins_sve_shrimm):
(aarch64_encode_variant_using_iclass): Handle
sve_shift_tsz_hsd iclass encode.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle
sve_shift_tsz_hsd iclass decode.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_SHRIMM_UNPRED_22.
(aarch64_print_operand): Add printing for SVE_SHRIMM_UNPRED_22.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHRIMM_UNPRED_22
operand.
Add AARCH64_OPND_SVE_ADDR_ZX operand that allows a vector of addresses
in a Zn register, offset by an Xm register.
This is used with scatter/gather SVE2 instructions.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (REG_ZR): Macro specifying zero register.
(parse_address_main): Account for new addressing mode [Zn.S, Xm].
(parse_operands): Handle new SVE_ADDR_ZX operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_ADDR_ZX operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_ADDR_ZX.
(aarch64_print_operand): Add printing for SVE_ADDR_ZX.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_ADDR_ZX operand.
Introduce new operand SVE_Zm3_11_INDEX that indicates a register between
z0-z7 stored in bits 18-16 and an index stored in bits 20-19:11.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_Zm3_11_INDEX
operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_Zm3_11_INDEX operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_Zm3_11_INDEX.
(aarch64_print_operand): Add printing for SVE_Zm3_11_INDEX.
(fields): Handle SVE_i3l and SVE_i3h2 fields.
* aarch64-opc.h (enum aarch64_field_kind): New SVE_i3l and SVE_i3h2
fields.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm3_11_INDEX operand.
New operand AARCH64_OPND_SVE_IMM_ROT3 handles a single bit rotate
operand encoded at bit position 10.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_IMM_ROT3 operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_IMM_ROT3 operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_IMM_ROT3.
(aarch64_print_operand): Add printing for SVE_IMM_ROT3.
(fields): Handle SVE_rot3 field.
* aarch64-opc.h (enum aarch64_field_kind): New SVE_rot3 field.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_IMM_ROT3 operand.
Include all feature flag macros.
The "sve2" extension that enables the core sve2 instructions.
This also enables the sve extension, since sve is a requirement of sve2.
Extra optional sve2 features are the bitperm, sm4, aes, and sha3 extensions.
These are all given extra feature flags, "bitperm", "sve2-sm4",
"sve2-aes", and "sve2-sha3" respectively.
The sm4, aes, and sha3 extensions are explicitly marked as sve2
extensions to distinguish them from the corresponding NEON extensions.
Rather than continue extending the current feature flag numbers, I used
some bits that have been skipped.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c: Add command line architecture feature flags
"sve2", "sve2-sm4", "sve2-aes", "sve2-sha3", "bitperm".
* doc/c-aarch64.texi: Document new architecture feature flags.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SVE2
AARCH64_FEATURE_SVE2_AES, AARCH64_FEATURE_SVE2_BITPERM,
AARCH64_FEATURE_SVE2_SM4, AARCH64_FEATURE_SVE2_SHA3): New
feature macros.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-tbl.h
(aarch64_feature_sve2, aarch64_feature_sve2aes,
aarch64_feature_sve2sha3, aarch64_feature_sve2sm4,
aarch64_feature_sve2bitperm): New feature sets.
(SVE2, SVE2_AES, SVE2_SHA3, SVE2_SM4, SVE2_BITPERM): New macros
for feature set addresses.
(SVE2_INSN, SVE2_INSNC, SVE2AES_INSN, SVE2SHA3_INSN,
SVE2SM4_INSN, SVE2SM4_INSNC, SVE2BITPERM_INSN): New macros.
This patch enables the new Transactional Memory Extension added recently
as part of Arm's new architecture technologies.
We introduce a new optional extension "tme" to enable this. The following
instructions are part of the extension:
* tstart <Xt>
* ttest <Xt>
* tcommit
* tcancel #<imm>
The ISA for the above can be found here:
https://developer.arm.com/docs/ddi0602/latest/base-instructions-alphabetic-order
*** gas/ChangeLog ***
2019-05-01 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add case for
AARCH64_OPND_TME_UIMM16.
(aarch64_features): Add "tme".
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/tme-invalid.d: New test.
* testsuite/gas/aarch64/tme-invalid.l: New test.
* testsuite/gas/aarch64/tme-invalid.s: New test.
* testsuite/gas/aarch64/tme.d: New test.
* testsuite/gas/aarch64/tme.s: New test.
*** include/ChangeLog ***
2019-05-01 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_TME): New.
(enum aarch64_opnd): Add AARCH64_OPND_TME_UIMM16.
*** opcodes/ChangeLog ***
2019-05-01 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Add case for
AARCH64_OPND_TME_UIMM16.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_IMM_NIL): New.
(TME): New.
(_TME_INSN): New.
(struct aarch64_opcode): Add tstart, tcommit, ttest and tcancel.
This patch updates the Store allocation tags instructions in
Armv8.5-A Memory Tagging Extension. This is part of the changes
that have been introduced recently in the 00bet10 release
All of these instructions have an updated register operand (Xt -> <Xt|SP>)
- STG <Xt|SP>, [<Xn|SP>, #<simm>]
- STG <Xt|SP>, [<Xn|SP>, #<simm>]!
- STG <Xt|SP>, [<Xn|SP>], #<simm>
- STZG <Xt|SP>, [<Xn|SP>, #<simm>]
- STZG <Xt|SP>, [<Xn|SP>, #<simm>]!
- STZG <Xt|SP>, [<Xn|SP>], #<simm>
- ST2G <Xt|SP>, [<Xn|SP>, #<simm>]
- ST2G <Xt|SP>, [<Xn|SP>, #<simm>]!
- ST2G <Xt|SP>, [<Xn|SP>], #<simm>
- STZ2G <Xt|SP>, [<Xn|SP>, #<simm>]
- STZ2G <Xt|SP>, [<Xn|SP>, #<simm>]!
- STZ2G <Xt|SP>, [<Xn|SP>], #<simm>
In order to accept <Rt|SP> a new operand type Rt_SP is introduced which has
the same field as FLD_Rt but follows other semantics of Rn_SP.
*** gas/ChangeLog ***
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (process_omitted_operand): Add case for
AARCH64_OPND_Rt_SP.
(parse_operands): Likewise.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Update tests.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** include/ChangeLog ***
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_Rt_SP.
*** opcodes/ChangeLog ***
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_print_operand): Add case for
AARCH64_OPND_Rt_SP.
(verify_constraints): Likewise.
* aarch64-tbl.h (QL_LDST_AT): Update to add SP qualifier.
(struct aarch64_opcode): Update stg, stzg, st2g, stz2g instructions
to accept Rt|SP as first operand.
(AARCH64_OPERANDS): Add new Rt_SP.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds the new LDGM/STGM instructions of the
Armv8.5-A Memory Tagging Extension. This is part of the changes
that have been introduced recently in the 00bet10 release
The instructions are as follows:
LDGM Xt, [<Xn|SP>]
STGM Xt, [<Xn|SP>]
*** gas/ChangeLog ***
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-memtag.d: New tests for ldgm and stgm.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** opcodes/ChangeLog ***
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
* aarch64-tbl.h (aarch64_opcode): Add new ldgm and stgm.
The AArch64 instruction set has cut-outs inside instructions encodings for
when a given encoding that would normally fall within the encoding space of
an instruction is instead undefined.
This updates the first few instructions FMLA, FMLA, FMUL and FMULX in the case
where sz:L == 11.
gas/ChangeLog:
PR binutils/23212
* testsuite/gas/aarch64/undefined_by_elem_sz_l.s: New test.
* testsuite/gas/aarch64/undefined_by_elem_sz_l.d: New test.
opcodes/ChangeLog:
PR binutils/23212
* aarch64-opc.h (enum aarch64_field_kind): Add FLD_sz.
* aarch64-opc.c (verify_elem_sd): New.
(fields): Add FLD_sz entr.
* aarch64-tbl.h (_SIMD_INSN): New.
(aarch64_opcode_table): Add elem_sd verifier to fmla, fmls, fmul and
fmulx scalar and vector by element isns.
This patch is part of a series of patches to introduce a few changes to the
Armv8.5-A Memory Tagging Extension. This patch updates the st*g instructions
to use a previously reserved field for a new register operand. Thus the
new versions of the instructions are as follows:
- STG Xt, [<Xn|SP>, #<simm>]
- STG Xt, [<Xn|SP>, #<simm>]!
- STG Xt, [<Xn|SP>], #<simm>
- STZG Xt, [<Xn|SP>, #<simm>]
- STZG Xt, [<Xn|SP>, #<simm>]!
- STZG Xt, [<Xn|SP>], #<simm>
- ST2G Xt, [<Xn|SP>, #<simm>]
- ST2G Xt, [<Xn|SP>, #<simm>]!
- ST2G Xt, [<Xn|SP>], #<simm>
- STZ2G Xt, [<Xn|SP>, #<simm>]
- STZ2G Xt, [<Xn|SP>, #<simm>]!
- STZ2G Xt, [<Xn|SP>], #<simm>
Committed on behalf of Sudakshina Das.
*** gas/ChangeLog ***
* config/tc-aarch64.c (warn_unpredictable_ldst): Exempt
stg, st2g, stzg and stz2g from Xt == Xn with writeback warning.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Change tests for
stg, stzg, st2g and stz2g.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** opcodes/ChangeLog ***
* aarch64-tbl.h (QL_LDST_AT): Update macro.
(aarch64_opcode): Change encoding for stg, stzg
st2g and st2zg.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch is part of a series of patches to introduce a few changes to the
Armv8.5-A Memory Tagging Extension. This patch adds the new STZGM instruction.
STGZM Xt, [<Xn|SP>]
Committed on behalf of Sudakshina Das.
*** gas/ChangeLog ***
* testsuite/gas/aarch64/armv8_5-a-memtag.d: New tests for stzgm.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** opcodes/ChangeLog ***
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
* aarch64-tbl.h (aarch64_opcode): Add new stzgm.
This patch is part of a series of patches to introduce a few changes to the
Armv8.5-A Memory Tagging Extension. This patch removes the LDGV and STGV
instructions. These instructions needed special infrastructure to support
[base]! style for addressing mode. That is also removed now.
Committed on behalf of Sudakshina Das.
*** gas/ChangeLog ***
* config/tc-aarch64.c (parse_address_main): Remove support for
[base]! address expression.
(parse_operands): Remove support for AARCH64_OPND_ADDR_SIMPLE_2.
(warn_unpredictable_ldst): Remove support for ldstgv_indexed.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Remove tests for ldgv
and stgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** include/ChangeLog ***
* opcode/aarch64.h (enum aarch64_opnd): Remove
AARCH64_OPND_ADDR_SIMPLE_2.
(enum aarch64_insn_class): Remove ldstgv_indexed.
*** opcodes/ChangeLog ***
* aarch64-asm.c (aarch64_ins_addr_simple_2): Remove.
* aarch64-asm.h (ins_addr_simple_2): Likeiwse.
* aarch64-dis.c (aarch64_ext_addr_simple_2): Likewise.
* aarch64-dis.h (ext_addr_simple_2): Likewise.
* aarch64-opc.c (operand_general_constraint_met_p): Remove
case for ldstgv_indexed.
(aarch64_print_operand): Remove case for AARCH64_OPND_ADDR_SIMPLE_2.
* aarch64-tbl.h (struct aarch64_opcode): Remove ldgv and stgv.
(AARCH64_OPERANDS): Remove ADDR_SIMPLE_2.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
ARM Architecture Reference Manual for the profile ARMv8-A, Issue C.a,
states that MOV (register) is an alias of the ORR (shifted register)
iff shift == '00' && imm6 == '000000' && Rn == '11111'. However, mov
is currently preferred for a broader range of orr instructions, which
is incorrect.
2018-12-03 Egeyar Bagcioglu <egeyar.bagcioglu@oracle.com>
opcodes:
PR 23193
PR 19721
* aarch64-tbl.h (aarch64_opcode_table): Only disassemble an ORR
encoding as MOV if the shift operation is a left shift of zero.
gas:
PR 23193
PR 19721
* testsuite/gas/aarch64/pr19721.s: Add new test cases.
* testsuite/gas/aarch64/pr19721.d: Correct existing test
cases and add new ones.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Bulk Allocation Tag instructions from
MTE. These are the following instructions added in this patch:
- LDGV <Xt>, [<Xn|SP>]!
- STGV <Xt>, [<Xn|SP>]!
This needed a new kind of operand for the new addressing [<Xn|SP>]!
since this has no offset and only takes a pre-indexed version.
Hence AARCH64_OPND_ADDR_SIMPLE_2 and ldtdgv_indexed are introduced.
(AARCH64_OPND_ADDR_SIMPLE fulfilled the no offset criteria but does
not allow writeback). We also needed new encoding and decoding
functions to be able to do the same.
where
<Xt> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMPLE_2.
(aarch64_insn_class): Add ldstgv_indexed.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm.c (aarch64_ins_addr_simple_2): New.
* aarch64-asm.h (ins_addr_simple_2): Declare the above.
* aarch64-dis.c (aarch64_ext_addr_simple_2): New.
* aarch64-dis.h (ext_addr_simple_2): Declare the above.
* aarch64-opc.c (operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMPLE_2 and ldstgv_indexed.
(aarch64_print_operand): Add case for AARCH64_OPND_ADDR_SIMPLE_2.
* aarch64-tbl.h (aarch64_opcode_table): Add stgv and ldgv.
(AARCH64_OPERANDS): Define ADDR_SIMPLE_2.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_ADDR_SIMPLE_2 and allow [base]! for it.
(warn_unpredictable_ldst): Exempt ldstgv_indexed for ldgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldgv and stgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag Getting instruction from Memory Tagging
Extension.
- LDG <Xt>, [<Xn|SP>, #<simm>]
where
<Xt> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.
<simm> : Is the optional signed immediate offset, a multiple of 16
in the range of -4096 and 4080, defaulting to 0.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (QL_LDG): New.
(aarch64_opcode_table): Add ldg.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldg.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag setting instructions from
MTE which consists of the following instructions:
- STG [<Xn|SP>, #<simm>]
- STG [<Xn|SP>, #<simm>]!
- STG [<Xn|SP>], #<simm>
- STZG [<Xn|SP>, #<simm>]
- STZG [<Xn|SP>, #<simm>]!
- STZG [<Xn|SP>], #<simm>
- ST2G [<Xn|SP>, #<simm>]
- ST2G [<Xn|SP>, #<simm>]!
- ST2G [<Xn|SP>], #<simm>
- STZ2G [<Xn|SP>, #<simm>]
- STZ2G [<Xn|SP>, #<simm>]!
- STZ2G [<Xn|SP>], #<simm>
- STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]
- STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]!
- STGP <Xt>, <Xt2>, [<Xn|SP>], #<imm>
where
<Xn|SP> : Is the 64-bit GPR or Stack pointer.
<simm> : Is the optional signed immediate offset, a multiple of 16
in the range -4096 to 4080, defaulting to 0.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMM11
and AARCH64_OPND_ADDR_SIMM13.
(aarch64_opnd_qualifier): Add new AARCH64_OPND_QLF_imm_tag.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_opnd_qualifiers): Add new data
for AARCH64_OPND_QLF_imm_tag.
(operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_LDST_AT, QL_STGP): New.
(aarch64_opcode_table): Add stg, stzg, st2g, stz2g and stgp
for both offset and pre/post indexed versions.
(AARCH64_OPERANDS): Define ADDR_SIMM11 and ADDR_SIMM13.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(fix_insn): Likewise.
(warn_unpredictable_ldst): Exempt STGP.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for stg, st2g,
stzg, stz2g and stgp.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Pointer Arithmetic instructions from
MTE. These are the following instructions added in this patch:
- SUBP <Xd>, <Xn|SP>, <Xm|SP>
- SUBPS <Xd>, <Xn|SP>, <Xm|SP>
- CMPP <Xn|SP>, <Xm|SP>
where CMPP is an alias to SUBPS XZR, <Xn|SP>, <Xm|SP>
where
<Xd> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.
<Xm|SP> : Is the 64-bit second source GPR or Stack pointer.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_opcode_table): Add subp, subps and cmpp.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for subp,
subps and cmpp.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag generation instructions from
MTE. These are the following instructions added in this patch:
- IRG <Xd|SP>, <Xn|SP>{, Xm}
- ADDG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2>
- SUBG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2>
- GMI <Xd>, <Xn|SP>, <Xm>
where
<Xd|SP> : Is the 64-bit destination GPR or Stack pointer.
<Xn|SP> : Is the 64-bit source GPR or Stack pointer.
<uimm6> : Is the unsigned immediate, a multiple of 16
in the range 0 to 1008.
<uimm4> : Is the unsigned immediate, in the range 0 to 15.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10 as new enums.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.h (aarch64_field_kind): New FLD_imm4_3.
(OPD_F_SHIFT_BY_4, operand_need_shift_by_four): New.
* aarch64-opc.c (fields): Add entry for imm4_3.
(operand_general_constraint_met_p): Add cases for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_ADDG): New.
(aarch64_opcode_table): Add addg, subg, irg and gmi.
(AARCH64_OPERANDS): Define UIMM4_ADDG and UIMM10.
* aarch64-asm.c (aarch64_ins_imm): Add case for
operand_need_shift_by_four.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: New.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.d: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions. Memory Tagging Extension is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch adds the new command line option and the new feature macros.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_MEMTAG): New.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_memtag): New.
(MEMTAG, MEMTAG_INSN): New.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "memtag"
as a new option.
* doc/c-aarch64.texi: Document the same.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order/bti-branch-target-identification)
The Branch Target Identification instructions (BTI) are allocated to
existing HINT space, using HINT numbers 32, 34, 36, 38, such that
bits[7:6] of the instruction identify the compatibility of the BTI
instruction to different branches.
BTI {<targets>}
where <targets> one of the following, specifying which type of
indirection is allowed:
j : Can be a target of any BR Xn isntruction.
c : Can be a target of any BLR Xn and BR {X16|X17}.
jc: Can be a target of any free branch.
A BTI instruction without any <targets> is the strictest of all and
can not be a target of nay free branch.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_BTI): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_BTI by default.
(aarch64_opnd): Add AARCH64_OPND_BTI_TARGET.
(HINT_OPD_CSYNC, HINT_OPD_C, HINT_OPD_J): New macros to
define HINT #imm values.
(HINT_OPD_JC, HINT_OPD_NULL): Likewise.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.h (HINT_OPD_NOPRINT, HINT_ENCODE): New.
(HINT_FLAG, HINT_VALUE): New macros to encode NO_PRINT flag
with the hint immediate.
* aarch64-opc.c (aarch64_hint_options): New entries for
c, j, jc and default (with HINT_OPD_F_NOPRINT flag) for BTI.
(aarch64_print_operand): Add case for AARCH64_OPND_BTI_TARGET
while checking for HINT_OPD_F_NOPRINT flag.
* aarch64-dis.c (aarch64_ext_hint): Use new HINT_VALUE to
extract value.
* aarch64-tbl.h (aarch64_feature_bti, BTI, BTI_INSN): New.
(aarch64_opcode_table): Add entry for BTI.
(AARCH64_OPERANDS): Add new description for BTI targets.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_bti_operand): New.
(process_omitted_operand): Add case for AARCH64_OPND_BTI_TARGET.
(parse_operands): Likewise.
* testsuite/gas/aarch64/system.d: Update for BTI.
* testsuite/gas/aarch64/bti.s: New.
* testsuite/gas/aarch64/bti.d: New.
* testsuite/gas/aarch64/illegal-bti.d: New.
* testsuite/gas/aarch64/illegal-bti.l: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This patch adds the prediction restriction instructions (that is, cfp,
dvp, cpp). These instructions are retrospectively made optional for
all versions of the architecture from ARMv8.0 to ARMv8.4 and is
mandatory from ARMv8.5. Hence adding a new +predres which can be used
by the older architectures.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_PREDRES): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_PREDRES by default.
(aarch64_opnd): Add AARCH64_OPND_SYSREG_SR.
(aarch64_sys_regs_sr): Declare new table.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-dis.c (aarch64_ext_sysins_op): Add case for
AARCH64_OPND_SYSREG_SR.
* aarch64-opc.c (aarch64_print_operand): Likewise.
(aarch64_sys_regs_sr): Define table.
(aarch64_sys_ins_reg_supported_p): Check for RCTX with
AARCH64_FEATURE_PREDRES.
* aarch64-tbl.h (aarch64_feature_predres): New.
(PREDRES, PREDRES_INSN): New.
(aarch64_opcode_table): Add entries for cfp, dvp and cpp.
(AARCH64_OPERANDS): Add new description for SYSREG_SR.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_sys_regs_sr_hsh): New.
(parse_operands): Add entry for AARCH64_OPND_SYSREG_SR.
(md_begin): Allocate and initialize aarch64_sys_regs_sr_hsh
with aarch64_sys_regs_sr.
(aarch64_features): Add new "predres" option for older
architectures.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sysreg-4.s: New.
* testsuite/gas/aarch64/sysreg-4.d: New.
* testsuite/gas/aarch64/illegal-sysreg-4.d: New.
* testsuite/gas/aarch64/illegal-sysreg-4.l: New.
* testsuite/gas/aarch64/predres.s: New.
* testsuite/gas/aarch64/predres.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This instruction is retrospectively made optional for all versions of
the architecture from ARMv8.0 to ARMv8.4 and is mandatory from
ARMv8.5. Hence a new command line option of "+sb" is added for older
architectures.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SB): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SB by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_sb): New.
(SB, SB_INSN): New.
(aarch64_opcode_table): Add entry for sb.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add new "sb" option
for older architectures.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sb.s: New.
* testsuite/gas/aarch64/sb.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This patch adds the data processing instructions that are new to
ARMv8.5-A.
1) There are 2 instructions: xaflag, axflag, that are added to
manipulate the states of the flag and are used to convert between the
Arm representation and the fcmp representation.
2) The other instructions are rounding instructions which have 8
versions based on whether the floating-point number is a
Single-Precision or Double-Precision number, whether the target
integer is a 32-bit or 64-bit integer and whether the rounding mode is
the ambient rounding mode or to zero. Each of these instruction is
available in both Scalar and Vector forms.
Since both 1) and 2) have separate identification mechanism and it is
permissible that a ARMv8.4 compliant implementation may include any
arbitrary subset of the ARMv8.5 features unless otherwise specified,
new feature bits are added.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_FLAGMANIP): New.
(AARCH64_FEATURE_FRINTTS): New.
(AARCH64_ARCH_V8_5): Add both by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_flagmanip): New.
(aarch64_feature_frintts): New.
(FLAGMANIP, FRINTTS): New.
(aarch64_opcode_table): Add entries for xaflag, axflag
and frint[32,64][x,z] instructions.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-dp.s: New.
* testsuite/gas/aarch64/armv8_5-a-dp.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This is the first of the patch series and adds -march=armv8.5-a and
other internal feature marcos needed for it.
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_archs): New entry for armv8.5-a.
* doc/c-aarch64.texi: Add documentation for the same.
*** include/ChnageLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_5): New.
(AARCH64_ARCH_V8_5): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_set aarch64_feature_v8_5): New.
(ARMV8_5, V8_5_INSN): New.
This patch series is to allow certain instructions such as the SVE MOVPRFX
instruction to apply a constraint/dependency on the instruction at PC+4.
This patch starts this off by marking which instructions impose the constraint
and which instructions must adhere to the constraint. This is done in a
generic way by extending the verifiers.
* The constraint F_SCAN indicates that an instruction opens a sequence and imposes
a constraint on an instructions following it. The length of the sequence depends
on the instruction itself and it handled in the verifier code.
* The C_SCAN_MOVPRFX flag is used to indicate which constrain the instruction is
checked against. An instruction with both F_SCAN and C_SCAN_MOVPRFX starts a
block for the C_SCAN_MOVPRFX instruction, and one with only C_SCAN_MOVPRFX must
adhere to a previous block constraint is applicable.
The SVE instructions in this list have been marked according to the SVE
specification[1].
[1] https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a
include/
* opcode/aarch64.h (struct aarch64_opcode): Add constraints,
extend flags field size.
(F_SCAN, C_SCAN_MOVPRFX, C_MAX_ELEM): New.
opcodes/
* aarch64-tbl.h (CORE_INSN, __FP_INSN, SIMD_INSN, CRYP_INSN, _CRC_INSN,
_LSE_INSN, _LOR_INSN, RDMA_INSN, FF16_INSN, SF16_INSN, V8_2_INSN,
_SVE_INSN, V8_3_INSN, CNUM_INSN, RCPC_INSN, SHA2_INSN, AES_INSN,
V8_4_INSN, SHA3_INSN, SM4_INSN, FP16_V8_2_INSN, DOT_INSN): Initialize
constraints.
(_SVE_INSNC): New.
(struct aarch64_opcode): (fjcvtzs, ldpsw, ldpsw, esb, psb): Initialize
constraints.
(movprfx): Change _SVE_INSN into _SVE_INSNC, add C_SCAN_MOVPRFX and
F_SCAN flags.
(msb, mul, neg, not, orr, rbit, revb, revh, revw, sabd, scvtf,
sdiv, sdivr, sdot, smax, smin, smulh, splice, sqadd, sqdecd, sqdech,
sqdecp, sqdecw, sqincd, sqinch, sqincp, sqincw, sqsub, sub, subr, sxtb,
sxth, sxtw, uabd, ucvtf, udiv, udivr, udot, umax, umin, umulh, uqadd,
uqdecd, uqdech, uqdecp, uqdecw, uqincd, uqinch, uqincp, uqincw, uqsub,
uxtb, uxth, uxtw, bic, eon, orn, mov, fmov): Change _SVE_INSN into _SVE_INSNC and add
C_SCAN_MOVPRFX and C_MAX_ELEM constraints.
For more details see: https://static.docs.arm.com/ddi0596/a/DDI_0596_ARM_a64_instruction_set_architecture.pdf
opcodes * aarch64-tbl.h (aarch64_opcode_table): Add entry for
ssbb and pssbb and update dsb flags to F_HAS_ALIAS.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
gas * testsuite/gas/aarch64/system.s: Add test for ssbb
and pssbb.
* testsuite/gas/aarch64/system.d: Update accordingly
and remove explicit addresses.
This adds the missing Em16 constraints the rest of the instructions requiring them
and also adds a testcase to test all the instructions so these are checked from
now on.
The Em16 operand constrains the valid registers to the lower 16 registers when used
with a half precision qualifier.
The list has been cross checked (by hand) through the Arm ARM version Ca.
opcodes/
PR binutils/23192
* aarch64-tbl.h (sqdmlal, sqdmlal2, smlsl, smlsl2, sqdmlsl, sqdmlsl2,
mul, smull, smull2, sqdmull, sqdmull2, sqdmulh, sqrdmulh, mla, umlal,
umlal2, mls, umlsl, umlsl2, umull, umull2, sqdmlal, sqdmlsl, sqdmull,
sqdmulh, sqrdmulh): Use Em16.
gas/
PR binutils/23192
* testsuite/gas/aarch64/illegal-by-element.s: New.
* testsuite/gas/aarch64/illegal-by-element.d: New.
* testsuite/gas/aarch64/illegal-by-element.l: New.
The disassembly mask for ldarh incorrectly didn't mask out bit 20 which
is part of the SBO part of the instruction and shouldn't be considered input.
This fixes the wrong bit fixing the disassembly of instructions to
ldarh and makes the behavior consistent.
opcodes/
PR binutils/23242
* aarch64-tbl.h (ldarh): Fix disassembly mask.
Some instructions in Armv8-a place a limitation on FP16 registers that can be
used as the register from which to select an element from.
e.g. fmla restricts Rm to 4 bits when using an FP16 register. This restriction
does not apply for all instructions, e.g. fcmla does not have this restriction
as it gets an extra bit from the M field.
Unfortunately, this restriction to S_H was added for all _Em operands before,
meaning for a large number of instructions you couldn't use the full register
file.
This fixes the issue by introducing a new operand _Em16 which applies this
restriction only when paired with S_H and leaves the _Em and the other
qualifiers for _Em16 unbounded (i.e. using the full 5 bit range).
Also the patch updates all instructions that should be affected by this.
opcodes/
PR binutils/23192
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
* aarch64-dis.c (aarch64_ext_reglane): Add AARCH64_OPND_Em16 constraint.
* aarch64-opc.c (operand_general_constraint_met_p,
aarch64_print_operand): Likewise.
* aarch64-tbl.h (aarch64_opcode_table): Change Em to Em16 for smlal,
smlal2, fmla, fmls, fmul, fmulx, sqrdmlah, sqrdlsh, fmlal, fmlsl,
fmlal2, fmlsl2.
(AARCH64_OPERANDS): Add Em2.
gas/
PR binutils/23192
* config/tc-aarch64.c (process_omitted_operand, parse_operands): Add
AARCH64_OPND_Em16
* testsuite/gas/aarch64/advsimd-armv8_3.s: Expand tests to cover upper
16 registers.
* testsuite/gas/aarch64/advsimd-armv8_3.d: Likewise.
* testsuite/gas/aarch64/advsimd-compnum.s: Likewise.
* testsuite/gas/aarch64/advsimd-compnum.d: Likewise.
* testsuite/gas/aarch64/sve.d: Likewise.
include/
PR binutils/23192
*opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_Em16.
