The format_pieces selftest currently fails on Windows hosts.
The selftest doesn't handle the "%ll" -> "%I64" rewrite that the
formatter may perform, but also gdbsupport was missing a configure
check for PRINTF_HAS_LONG_LONG. This patch fixes both issues.
In the gdbsupport configure.ac file, there is an attempt to define
TARGET_WORD_SIZE. This is done by running grep on the file
../bfd/bfd-in3.h.
The problem with this is, the file bfd-in3.h is generated into the bfd
build directory when bfd is configured, and there is no dependency
between the gdbsupport module and the bfd module, so, for example, if
I do:
$ ../src/configure
$ make all-gdbsupport
Then bfd will neither be configured, or built. In this case
TARGET_WORD_SIZE ends up being defined, but with no value because the
grep on bfd-in3.h fails.
However, it turns out that this doesn't matter; we don't actually use
TARGET_WORD_SIZE anywhere.
My proposal in this commit is to just remove the definition of
TARGET_WORD_SIZE, the alternative would be to add a dependency between
configure-gdbsupport and configure-bfd into Makefile.def, but adding a
dependency for something we don't need seems pretty pointless.
The next patch will make the use of sigtimedwait conditional to whether
the platform provides it. Start by adding a configure check for it.
gdbsupport/ChangeLog:
* common.m4 (GDB_AC_COMMON): Check for sigtimedwait.
* config.in, configure: Re-generate.
gdb/ChangeLog:
* config.in, configure: Re-generate.
gdbserver/ChangeLog:
* config.in, configure: Re-generate.
Change-Id: Ic7613fe14521b966b4d991bbcd0933ab14629c05
I get these changes when re-generating the autoconf stuff in gdbsupport,
fallouts from 4655f8509f ("Don't run personality syscall at configure
time; don't check it at all").
gdbsupport/ChangeLog:
* Makefile.in: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
Change-Id: Ie1876ee58d6f4f1cf25fa14900eecf4c85a744c1
FreeBSD systems have provided these functions in libutil since 7.1
release. The most recent release without support is 6.4 released in
November of 2008.
This also requires libutil-freebsd on GNU/kFreeBSD systems. I assume
that those systems have supported kinfo_get_file and kinfo_get_vmmap
over a similar timeframe.
gdb/ChangeLog:
* configure.ac: Remove check for kinfo_getvmmap().
* configure, config.in: Regenerate.
* fbsd-nat.c (fbsd_read_mapping): Remove
(fbsd_nat_target::find_memory_regions): Remove the procfs version.
(fbsd_nat_target::info_proc): Assume kinfo_getfile() and
kinfo_get_vmmap() are always present.
gdbsupport/ChangeLog:
* common.m4 (GDB_AC_COMMON): Refactor checks for kinfo_getfile().
* configure, config.in: Regenerate.
GDB currently doesn't build on 32-bit Solaris:
* On Solaris 11.4/x86:
In file included from /usr/include/sys/procfs.h:26,
from /vol/src/gnu/gdb/hg/master/dist/gdb/i386-sol2-nat.c:24:
/usr/include/sys/old_procfs.h:31:2: error: #error "Cannot use procfs in the large file compilation environment"
#error "Cannot use procfs in the large file compilation environment"
^~~~~
* On Solaris 11.3/x86 there are several more instances of this.
The interaction between procfs and large-file support historically has
been a royal mess on Solaris:
* There are two versions of the procfs interface:
** The old ioctl-based /proc, deprecated and not used any longer in
either gdb or binutils.
** The `new' (introduced in Solaris 2.6, 1997) structured /proc.
* There are two headers one can possibly include:
** <procfs.h> which only provides the structured /proc, definining
_STRUCTURED_PROC=1 and then including ...
** <sys/procfs.h> which defaults to _STRUCTURED_PROC=0, the ioctl-based
/proc, but provides structured /proc if _STRUCTURED_PROC == 1.
* procfs and the large-file environment didn't go well together:
** Until Solaris 11.3, <sys/procfs.h> would always #error in 32-bit
compilations when the large-file environment was active
(_FILE_OFFSET_BITS == 64).
** In both Solaris 11.4 and Illumos, this restriction was lifted for
structured /proc.
So one has to be careful always to define _STRUCTURED_PROC=1 when
testing for or using <sys/procfs.h> on Solaris. As the errors above
show, this isn't always the case in binutils-gdb right now.
Also one may need to disable large-file support for 32-bit compilations
on Solaris. config/largefile.m4 meant to do this by wrapping the
AC_SYS_LARGEFILE autoconf macro with appropriate checks, yielding
ACX_LARGEFILE. Unfortunately the macro doesn't always succeed because
it neglects the _STRUCTURED_PROC part.
To make things even worse, since GCC 9 g++ predefines
_FILE_OFFSET_BITS=64 on Solaris. So even if largefile.m4 deciced not to
enable large-file support, this has no effect, breaking the gdb build.
This patch addresses all this as follows:
* All tests for the <sys/procfs.h> header are made with
_STRUCTURED_PROC=1, the definition going into the various config.h
files instead of having to make them (and sometimes failing) in the
affected sources.
* To cope with the g++ predefine of _FILE_OFFSET_BITS=64,
-U_FILE_OFFSET_BITS is added to various *_CPPFLAGS variables. It had
been far easier to have just
#undef _FILE_OFFSET_BITS
in config.h, but unfortunately such a construct in config.in is
commented by config.status irrespective of indentation and whitespace
if large-file support is disabled. I found no way around this and
putting the #undef in several global headers for bfd, binutils, ld,
and gdb seemed way more invasive.
* Last, the applicability check in largefile.m4 was modified only to
disable largefile support if really needed. To do so, it checks if
<sys/procfs.h> compiles with _FILE_OFFSET_BITS=64 defined. If it
doesn't, the disabling only happens if gdb exists in-tree and isn't
disabled, otherwise (building binutils from a tarball), there's no
conflict.
What initially confused me was the check for $plugins here, which
originally caused the disabling not to take place. Since AC_PLUGINGS
does enable plugin support if <dlfcn.h> exists (which it does on
Solaris), the disabling never happened.
I could find no explanation why the linker plugin needs large-file
support but thought it would be enough if gld and GCC's lto-plugin
agreed on the _FILE_OFFSET_BITS value. Unfortunately, that's not
enough: lto-plugin uses the simple-object interface from libiberty,
which includes off_t arguments. So to fully disable large-file
support would mean also disabling it in libiberty and its users: gcc
and libstdc++-v3. This seems highly undesirable, so I decided to
disable the linker plugin instead if large-file support won't work.
The patch allows binutils+gdb to build on i386-pc-solaris2.11 (both
Solaris 11.3 and 11.4, using GCC 9.3.0 which is the worst case due to
predefined _FILE_OFFSET_BITS=64). Also regtested on
amd64-pc-solaris2.11 (again on Solaris 11.3 and 11.4),
x86_64-pc-linux-gnu and i686-pc-linux-gnu.
config:
* largefile.m4 (ACX_LARGEFILE) <sparc-*-solaris*|i?86-*-solaris*>:
Check for <sys/procfs.h> incompatilibity with large-file support
on Solaris.
Only disable large-file support and perhaps plugins if needed.
Set, substitute LARGEFILE_CPPFLAGS if so.
bfd:
* bfd.m4 (BFD_SYS_PROCFS_H): New macro.
(BFD_HAVE_SYS_PROCFS_TYPE): Require BFD_SYS_PROCFS_H.
Don't define _STRUCTURED_PROC.
(BFD_HAVE_SYS_PROCFS_TYPE_MEMBER): Likewise.
* elf.c [HAVE_SYS_PROCFS_H] (_STRUCTURED_PROC): Don't define.
* configure.ac: Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>.
* configure, config.in: Regenerate.
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
binutils:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gas:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gdb:
* proc-api.c (_STRUCTURED_PROC): Don't define.
* proc-events.c: Likewise.
* proc-flags.c: Likewise.
* proc-why.c: Likewise.
* procfs.c: Likewise.
* Makefile.in (INTERNAL_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* configure, config.in: Regenerate.
gdbserver:
* configure, config.in: Regenerate.
gdbsupport:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* common.m4 (GDB_AC_COMMON): Use BFD_SYS_PROCFS_H to check for
<sys/procfs.h>.
* Makefile.in: Regenerate.
* configure, config.in: Regenerate.
gnulib:
* configure.ac: Run ACX_LARGEFILE before gl_EARLY.
* configure: Regenerate.
gprof:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
ld:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
gdb_select.h and the event loop require some configure checks, so this
moves the needed checks to common.m4 and updates the configure
scripts.
gdb/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Remove checks that are now in GDB_AC_COMMON.
gdbserver/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* config.in: Rebuild.
gdbsupport/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* config.in, configure: Rebuild.
* common.m4 (GDB_AC_COMMON): Check for poll.h, sys/poll.h,
sys/select.h, and poll.
I stumbled on this snippet in nat/gdb_ptrace.h:
/* Some systems, in particular DEC OSF/1, Digital Unix, Compaq Tru64
or whatever it's called these days, don't provide a prototype for
ptrace. Provide one to silence compiler warnings. */
#ifndef HAVE_DECL_PTRACE
extern PTRACE_TYPE_RET ptrace();
#endif
I believe this is unnecessary today and should be removed. First, the
comment only mentions OSes we don't support (and to be honest, I had
never even heard of).
But most importantly, in C++, a declaration with empty parenthesis
declares a function that accepts no arguments, unlike in C. So if this
declaration was really used, GDB wouldn't build, since all ptrace call
sites pass some arguments. Since we haven't heard anything about this
causing some build failures since we have transitioned to C++, I
conclude that it's not used.
This patch removes it as well as the corresponding configure check.
gdb/ChangeLog:
* ptrace.m4: Don't check for ptrace declaration.
* config.in: Re-generate.
* configure: Re-generate.
* nat/gdb_ptrace.h: Don't declare ptrace if HAVE_DECL_PTRACE is
not defined.
gdbserver/ChangeLog:
* config.in: Re-generate.
* configure: Re-generate.
gdbsupport/ChangeLog:
* config.in: Re-generate.
* configure: Re-generate.
This moves many needed configure checks from gdb and gdbserver into
common.m4. This helps gdbsupport, nat, and target be self-contained.
The result is a bit spaghetti-ish, because gdbsupport uses another m4
file from gdb/. The resulting code is somewhat non-obvious. However,
these problems already exist, so it's not really that much worse than
what is already done.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Move many checks to ../gdbsupport/common.m4.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Remove any checks that were added to common.m4.
* acinclude.m4: Include lib-ld.m4, lib-prefix.m4, and
lib-link.m4.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure, Makefile.in, aclocal.m4, common.m4, config.in:
Rebuild.
* common.m4 (GDB_AC_COMMON): Move many checks from
gdb/configure.ac.
* acinclude.m4: Include bfd.m4, ptrace.m4.
Change-Id: I931eaa94065df268b30a2f1354390710df89c7f8
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
