Commit 04f096fb9e ("Move the xc16x target to the obsolete list") moved
the architecture from the "obsolete but still available" to the
"obsolete / support removed" list in config.bfd, making the architecture
impossible to enable (except maybe via "enable everything" options").
Note that I didn't touch */po/*.po{,t} on the assumption that these
would be updated by some (half)automatic means.
Add a -z pack-relative-relocs option to enable DT_RELR and create a
relr.dyn section for DT_RELR. DT_RELR is implemented with the linker
relaxation infrastructure, but it doesn't require the --relax option
enabled. -z pack-relative-relocs implies -z combreloc. -z nocombreloc
implies -z nopack-relative-relocs.
-z pack-relative-relocs is chosen over the similar option in lld,
--pack-dyn-relocs=relr, to implement a glibc binary lockout mechanism
with a special glibc version symbol, to avoid random crashes of DT_RELR
binaries with the existing glibc binaries.
bfd/
* elf-bfd.h (elf_link_hash_table): Add srelrdyn.
* elflink.c (_bfd_elf_link_create_dynamic_sections): Create a
.relr.dyn section for DT_RELR.
include/
* bfdlink.h (bfd_link_info): Add enable_dt_relr.
ld/
* News: Mention -z pack-relative-relocs and
-z nopack-relative-relocs.
* ld.texi: Document -z pack-relative-relocs and
-z nopack-relative-relocs.
* ldelf.c (ldelf_after_parse): Disable DT_RELR if not building
PIE nor shared library. Add 3 spare dynamic tags for DT_RELR,
DT_RELRSZ and DT_RELRENT.
* ldlang.c (lang_relax_sections): Also enable relaxation if
DT_RELR is enabled.
* emulparams/elf32_x86_64.sh: Source dt-relr.sh.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Likewise.
* emulparams/dt-relr.sh: New file.
* scripttempl/elf.sc: Support .relr.dyn.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
My commit 261980de18 added alignment for the resource table symbol.
But it is wrong. The Linux remoteproc driver loads and interprets the
contents of the .resource_table ELF section, not of a table symbol.
Without this patch, if the linker happens to output padding for symbol
alignment, then the resource table contents as viewed by the kernel
loader would "shift" and look corrupted.
ld/ChangeLog:
* scripttempl/pru.sc (.resource_table): Align the output
section, not the first symbol.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
Add support for TLS in XCOFF. Amongst the things done by this commit:
- Update XCOFF auxialiary header to match new version and allow TLS
sections.
- Add TLS sections (.tdata and .tbss) support in gas and ld.
- Add support for the TLS relocations in gas and ld.
Two different types BFD_RELOC are created for PPC and PPC64 as
the size is a pointer, thus distinct in 32 or 64bit.
The addresses given by ld to .tdata and .tbss is a bit special. In
XCOFF, these addresses are actually offsets from the TLS pointer
computed at runtime. AIX assembly and linker does the same. In
top of that, the .tdata must be before .data (this is mandatory for AIX
loader). Thus, the aix ld script is recomputing "." before .data to restore
its original value. There might be a simpler way, but this one is working.
Optimisation linked to TLS relocations aren't yet implemented.
bfd/
* reloc.c (BFD_RELOC_PPC_TLS_LE, BFD_RELOC_PPC_TLS_IE,
BFD_RELOC_PPC_TLS_M, BFD_RELOC_PPC_TLS_ML, BFD_RELOC_PPC64_TLS_GD,
BFD_RELOC_PPC64_TLS_LD, BFD_RELOC_PPC64_TLS_LE,
BFD_RELOC_PPC64_TLS_IE, BFD_RELOC_PPC64_TLS_M,
BFD_RELOC_PPC64_TLS_ML): New relocations.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* coff-rs6000.c (xcoff_calculate_relocation): Call
xcoff_reloc_type_tls for TLS relocations.
(xcoff_howto_table): Implement TLS relocations.
(_bfd_xcoff_reloc_type_lookup): Add cases TLS relocations.
(xcoff_reloc_type_tls): New function.
* coff64-rs6000.c (xcoff_calculate_relocation): Likewise.
(xcoff_howto_table): Likewise.
(_bfd_xcoff_reloc_type_lookup): Likewise.
* coffcode.h (sec_to_styp_flags): Handle TLS sections.
(styp_to_sec_flags): Likewise.
(coff_compute_section_file_positions): Avoid file offset
optimisation for .data when the previous section is .tdata.
(coff_write_object_contents): Handle TLS sections.
* coffswap.h (coff_swap_aouthdr_out): Add support for
new fields in aouthdr.
* libxcoff.h (xcoff_reloc_type_tls): Add prototype.
* xcofflink.c (xcoff_link_add_symbols): Handle XMC_UL.
(xcoff_need_ldrel_p): Add cases for TLS relocations.
(xcoff_create_ldrel): Add l_symndx for TLS sections.
gas/
* config/tc-ppc.c (ppc_xcoff_text_section, ppc_xcoff_data_section,
(ppc_xcoff_bss_section, ppc_xcoff_tdata_section,
(ppc_xcoff_tbss_section): New variables.
(ppc_text_subsegment, ppc_text_csects, ppc_data_subgments,
(ppc_data_csects): Removed.
(ppc_xcoff_section_is_initialized, ppc_init_xcoff_section,
ppc_xcoff_parse_cons): New functions.
(md_being): Initialize XCOFF sections.
(ppc_xcoff_suffix): Add support for TLS relocations
(fixup_size, md_apply_fix): Add support for new BFD_RELOC.
(ppc_change_csect): Handle XMC_TL, XMC_UL. Correctly, add XMC_BS
to .bss section. Handle new XCOFF section variables.
(ppc_comm): Likewise.
(ppc_toc): Likewise.
(ppc_symbol_new_hook): Likewise.
(ppc_frob_symbol): Likewise.
(ppc_fix_adjustable): Add tbss support.
* config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): New define.
(ppc_xcoff_parse_cons): Add prototype.
(struct ppc_xcoff_section): New structure.
ld/
* emultempl/aix.em: Ensure .tdata section is removed
if empty, even with -r flag.
* scripttempl/aix.sc: Handle TLS sections.
* testsuite/ld-powerpc/aix52.exp: Add new tests.
* testsuite/ld-powerpc/aix-tls-reloc-32.d: New test.
* testsuite/ld-powerpc/aix-tls-reloc-64.d: New test.
* testsuite/ld-powerpc/aix-tls-reloc.ex: New test.
* testsuite/ld-powerpc/aix-tls-reloc.s: New test.
* testsuite/ld-powerpc/aix-tls-section-32.d: New test.
* testsuite/ld-powerpc/aix-tls-section-64.d: New test.
* testsuite/ld-powerpc/aix-tls-section.ex: New test.
* testsuite/ld-powerpc/aix-tls-section.s: New test.
include/
* coff/internal.h (struct internal_aouthdr): Add new fields.
* coff/rs6000.h (AOUTHDRÃ): Add new fields.
* coff/rs6k64.h (struct external_filehdr): Likewise.
* coff/xcoff.h (_TDATA), _TBSS): New defines
(RS6K_AOUTHDR_TLS_LE, RS6K_AOUTHDR_RAS, RS6K_AOUTHDR_ALGNTDATA,
RS6K_AOUTHDR_SHR_SYMTAB, RS6K_AOUTHDR_FORK_POLICY,
RS6K_AOUTHDR_FORK_COR): New defines.
(XMC_TU): Removed.
(XMC_UL): New define.
Implement support for largetoc on XCOFF.
R_TOCU and R_TOCL are referenced by the new BFD defines:
BFD_RELOC_PPC_TOC16_HI and BFD_RELOC_PPC_TOC16_LO.
A new toc storage class is added XMC_TE.
In order to correctly handle R_TOCU, the logic behind
xcoff_reloc_type_toc is changed to compute the whole TOC offset
instead of just the difference between the "link" offset and the
"assembly" offset.
In gas, add a function to transform addis format used by AIX
"addis RT, D(RA)" into the ELF format "addis RT, RA, SI".
bfd/
* reloc.c (BFD_RELOC_PPC_TOC16_HI, BFD_RELOC_PPC_TOC16_LO):
New relocations.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* coff-rs6000.c (xcoff_calculate_relocation): Call
xcoff_reloc_type_toc for R_TOCU and R_TOCL.
(xcoff_howto_table): Remove src_mask for TOC relocations.
Add R_TOCU and R_TOCL howtos.
(_bfd_xcoff_reloc_type_lookup): Add cases for
BFD_RELOC_PPC_TOC16_HI and BFD_RELOC_PPC_TOC16_LO.
(xcoff_reloc_type_toc): Compute the whole offset.
Implement R_TOCU and R_TOCL.
* coff64-rs6000.c (xcoff64_calculate_relocation):
Likewise.
(xcoff64_howto_table): Likewise.
(xcoff64_reloc_type_lookup): Likewise.
gas/
* config/tc-ppc.c (ppc_xcoff_suffix): New function.
(MAP, MAP32, MAP64): New macros for XCOFF.
(ppc_xcoff_fixup_addis): New function.
(ppc_is_toc_sym): Handle XMC_TE.
(fixup_size): Add cases for BFD_RELOC_PPC_TOC16_HI and
BFD_RELOC_PPC_TOC16_LO.
(md_assemble): Call ppc_xcoff_fixup_addis for XCOFF.
(ppc_change_csect): Handle XMC_TE.
(ppc_tc): Enable .tc symbols to have only a XMC_TC or XMC_TE
storage class.
(ppc_symbol_new_hook): Handle XMC_TE.
(ppc_frob_symbol): Likewise.
(ppc_fix_adjustable): Likewise.
(md_apply_fix): Handle BFD_RELOC_PPC_TOC16_HI and
BFD_RELOC_PPC_TOC16_LO.
ld/
* scripttempl/aix.sc: Add .te to .data section.
* testsuite/ld-powerpc/aix52.exp: Add test structure for AIX7+.
Add aix-largetoc-1 test.
* testsuite/ld-powerpc/aix-largetoc-1-32.d: New test.
* testsuite/ld-powerpc/aix-largetoc-1-64.d: New test.
* testsuite/ld-powerpc/aix-largetoc-1.ex: New test.
* testsuite/ld-powerpc/aix-largetoc-1.s: New test.
The offset-within-section field in the symbol table entry is only 32
bits wide, so rather than emitting bogus entries omit them, and issue
a diagnostic identifying the issue.
This requires adjusting the PR/22267 test to no longer produce symbols
with out of range values on 64-bit BFD. This also depends on
adjustments to testsuite/ld-scripts/map-address.* made by an earlier
patch. The purpose of the test can very well be achieved nevertheless.
This makes it possible to build ld without any compiled-in scripts,
by setting COMPILE_IN=no in the environment. pe, beos and pdp11
targets didn't support scripts from the file system, with pdp11
nastily editing the ld/ldscripts file so that the built-in script
didn't match.
PR 27226
* emulparams/alphavms.sh: Don't set COMPILE_IN.
* emulparams/elf64_ia64_vms.sh: Likewise.
* emulparams/elf64mmix.sh: Likewise.
* emulparams/elf_iamcu.sh: Likewise.
* emulparams/elf_k1om.sh: Likewise.
* emulparams/elf_l1om.sh: Likewise.
* emulparams/mmo.sh: Likewise.
* emulparams/pdp11.sh: Set DATA_SEG_ADDR.
* scripttempl/pdp11.sc: Use it.
* emultempl/pdp11.em: Don't edit .xn script for separate_code,
instead use .xe script. Support scripts from file system.
* emultempl/beos.em: Support scripts from file system.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* testsuite/ld-bootstrap/bootstrap.exp: Make tmpdir/ldscripts link.
* scripttempl/DWARF.sc: Add .debug_loclists, .debug_rnglists,
.debug_line_str and .debug_str_offsets. Move .debug_macro and
.debug_addr into DWARF-5 section.
The ".persistent" section is for data that should be initialized during
load, but not during application reset.
The ".noinit" section is for data that should not be initialized during
load or application reset.
Targets utilizing the elf.sc linker script template can define
HAVE_{NOINIT,PERSISTENT}=yes to include the .noinit or .persistent
output sections in the generated linker script.
Targets with existing support for .noinit did not handle unique
.noinit.* and .gnu.linkonce.n.* sections the .noinit output section,
this patch also fixes that.
bfd/ChangeLog:
* elf.c (special_sections_g): Add .gnu.linkonce.n and .gnu.linkonce.p.
(special_sections_n): Add .noinit.
(special_sections_p): Add .persistent.
binutils/ChangeLog:
* testsuite/lib/binutils-common.exp (supports_noinit_section): New.
(supports_persistent_section): New.
gas/ChangeLog:
* testsuite/gas/elf/elf.exp: Run new tests.
* testsuite/gas/elf/section25.d: New test.
* testsuite/gas/elf/section25.s: New test.
* testsuite/gas/elf/section26.d: New test.
* testsuite/gas/elf/section26.s: New test.
ld/ChangeLog:
* emulparams/armelf.sh (OTHER_SECTIONS): Remove .noinit section
definition.
Define HAVE_{NOINIT,PERSISTENT}=yes.
* scripttempl/avr.sc (.noinit): Add .noinit.* and .gnu.linkonce.n.*
input section wildcard patterns.
* scripttempl/elf.sc: Define .noinit and .persistent sections when
HAVE_NOINIT or HAVE_PERSISTENT are defined to "yes".
* scripttempl/elf32msp430.sc (.noinit): Add .noinit.* and
.gnu.linkonce.n.*. input section wildcard patterns.
(.persistent): Add .persistent.* and
.gnu.linkonce.p.*. input section wildcard patterns.
* scripttempl/elfarcv2.sc (.noinit): Add .noinit.* and
.gnu.linkonce.n.*. input section wildcard patterns.
* scripttempl/pru.sc: Likewise.
* testsuite/ld-elf/noinit-sections-1.d: New test.
* testsuite/ld-elf/noinit-sections-2.d: New test.
* testsuite/ld-elf/noinit-sections-2.l: New test.
* testsuite/ld-elf/noinit-sections.s: New test.
* testsuite/ld-elf/persistent-sections-1.d: New test.
* testsuite/ld-elf/persistent-sections-2.d: New test.
* testsuite/ld-elf/persistent-sections-2.l: New test.
* testsuite/ld-elf/persistent-sections.s: New test.
__{preinit,init,fini}_array_start symbols must be word aligned in
linker scripts. If the section preceding the __*_array_start symbol
has an odd size, then a NULL byte will be present between the start
symbol and the .*_array section itself, when the section gets
automatically word-aligned.
This results in a branch to an invalid address when the CRT startup
code tries to run through the functions listed in the array sections.
Some MSP430 linker scripts do not align the __*_array start symbols, so
this added warning will catch that problem and help the user avoid
the potential incorrect execution of the program.
ld/ChangeLog:
* emultempl/msp430.em (input_section_exists): New.
(check_array_section_alignment): New.
(gld${EMULATION_NAME}_finish): New.
* scripttempl/elf32msp430.sc: Add ALIGN directives before the
definition of __*_array_start symbols.
* testsuite/ld-msp430-elf/finiarray-warn.ld: New test.
* testsuite/ld-msp430-elf/finiarray-warn.r: New test.
* testsuite/ld-msp430-elf/initarray-nowarn.ld: New test.
* testsuite/ld-msp430-elf/initarray-warn.ld: New test.
* testsuite/ld-msp430-elf/initarray-warn.r: New test.
* testsuite/ld-msp430-elf/initarray.s: New test.
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
* testsuite/ld-msp430-elf/preinitarray-warn.ld: New test.
* testsuite/ld-msp430-elf/preinitarray-warn.r: New test.
With this patch, ld/pr24511 test passes for ARC.
At first glance, the test was failing because the order of
"__init_array_start" and "__fini_array_start" weak symbols were
reversed:
$ nm -n dump.out
expected output | real output
00002104 D __init_array_start | 00002104 D __fini_array_start
0000210c D __fini_array_start | 00002104 D __init_array_start
The order of the symbols are different as a side effect of both
symbols being mapped to the _same_ address (0x2104). Looking
further into the mapping logs [1] revealed that the linker
script must consider all instances of ".init_array" (in other
words ".init_array.*") inside its relevant section. Same logic
holds for ".fini_array".
Therefore, adding "KEEP (*(SORT(.init_array.*)))" to the linker
script, along with the one for ".finit_array.*", resolved the
problem. While at it, I took the liberty of refactoring the
script a little bit and made those pieces of script macros.
[1] Linker's mapping for the relevant part of the test
---------------------------------------------------------------
.init_array 0x2104 0x0
0x2104 PROVIDE (__init_array_start = .)
*(.init_array)
[!provide] PROVIDE (__init_array_end = .)
.fini_array 0x2104 0x0
0x2104 PROVIDE (__fini_array_start = .)
*(.fini_array)
[!provide] PROVIDE (__fini_array_end = .)
.data 0x2104 0x0
*(.data .data.* .gnu.linkonce.d.*)
.data 0x2104 0x0 pr24511.o
.init_array.01000
0x2104 0x8
.init_array.01000
0x2104 0x8 pr24511.o
.fini_array.01000
0x210c 0x8
.fini_array.01000
0x210c 0x8 pr24511.o
---------------------------------------------------------------
ld:
* scripttempl/elfarc.sc (.init_array): Keep ".init_array.*".
(.fini_array): Keep ".fini_array.*".
Signed-off-by: Claudiu Zissulescu <claziss@gmail.com>
So, here's my suggestion for making _init .. __etext cover .text +
.rodata (including things like the read-only exception tables) for
elf64mmix. A quick web search gives that __etext (and friends) isn't
well defined, so each target can interpret the "end of text segment"
to their own liking. It seems likely this change is also a better fit
than the default for other ports, at least those with .rodata after
.text in the same segment.
The presence of a separate rodata-segment is optional (and not true
for elf64mmix). This is reflected in the name as SEPARATE_TEXT /
SEPARATE_CODE isn't considered, to keep it simple; each target has to
make sure their settings of variables make sense.
ld:
* scripttempl/elf.sc (ETEXT_LAST_IN_RODATA_SEGMENT): New variable.
* emulparams/elf64mmix.sh (ETEXT_LAST_IN_RODATA_SEGMENT): Define.
* testsuite/ld-mmix/sec-1.d: Adjust.
This both makes the section layout more similar to that of the general
default for ELF and fixes (makes true) an assumption that code and
rodata is located between _init and __etext, in
libgcc/config/mmix/crti.S. Sadly, that's not actually true for ELF
(generally and for elf64mmix), where exception-tables and .rodata is
after _etext; I'm pondering what to do about that.
The original mmix simulator behavior is that memory magically appears
on access, initialized with 0, which is not preferable when chasing
bugs by throwing code the size of the gcc test-suite to the simulator.
The code in crti.S compatibly enables simulator machinery to identify
undefined memory and instead stopping the simulator with an error
(going to interactive mode for interactive runs). See
http://gcc.gnu.org/legacy-ml/gcc-patches/2012-10/msg01871.html for
more, including the mmix-sim.ch "patch file".
This fixes only one error in the gcc testsuite,
gcc.c-torture/execute/pr20621-1.c with LTO, where for some reason
gcc/lto chooses to move (writable) data that is only used to read 0 to
.rodata. An access (sufficiently far inside a block) in an
unregistered place is flagged as an invalid access.
The bpo-9m test that I had to adjust, actually exposes a wart: mmo
does not have the notion of symbol types (or sections) and the
test-case now has leading zeros at "Main" eventually leading to it
being misdiagnosed as being outside .text and .data, thus here mapped
to BFD as an absolute symbol. The test is not intended to check the
mmo symbol-type machinery, so I'm just tweaking it to be
symbol-type-neutral for "Main".
Since you have to jump through hoops to see the problem, I don't think
this commit is worth putting on the 2.35-branch.
ld:
* scripttempt/mmo.sc: Move .init first in .text output section.
* testsuite/ld-mmix/bpo-9m.d: Adjust accordingly.
microblaze-linux uses the standard ELF script, microblaze-elf its own
script lacking an input section pattern needed to make this test pass.
Add the missing pattern for .data, in line with most other sections
that do have .* patterns.
* scripttempl/elfmicroblaze.sc (.data): Add .data.* entry.
* testsuite/ld-elf/var1.d: Don't xfail microblaze.
ld/ChangeLog:
2020-01-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* scripttempl/elf32msp430.sc: Add input section rules for
.upper.{text,data,rodata,bss}.
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new test.
* testsuite/ld-msp430-elf/upper-input-sections.s: New test.
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* elfarcv2.sc : Allow interrupt vector table to be located at an
arbitrary address. Use DWARF.sc file.
* elfarc.sc: Use DWARF.sc file.
PR 25224
bfd * Makefile.am: Add z80-elf target support.
* configure.ac: Likewise.
* targets.c: Likewise.
* config.bfd: Add z80-elf target support and new arches: ez80 and z180.
* elf32-z80.c: New file.
* archures.c: Add new z80 architectures: eZ80 and Z180.
* coffcode.h: Likewise.
* cpu-z80.c: Likewise.
* bfd-in2.h: Likewise plus additional Z80 relocations.
* coff-z80.c: Add new relocations for Z80 target and local label check.
gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support
for assembler code generated by SDCC. Add new relocation types. Add
z80-elf target support.
* config/tc-z80.h: Add z80-elf target support. Enable dollar local
labels. Local labels starts from ".L".
* testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict.
* testsuite/gas/all/fwdexp.s: Likewise.
* testsuite/gas/z80/suffix.d: Fix failure on ELF target.
* testsuite/gas/z80/z80.exp: Add new tests
* testsuite/gas/z80/dollar.d: New file.
* testsuite/gas/z80/dollar.s: New file.
* testsuite/gas/z80/ez80_adl_all.d: New file.
* testsuite/gas/z80/ez80_adl_all.s: New file.
* testsuite/gas/z80/ez80_adl_suf.d: New file.
* testsuite/gas/z80/ez80_isuf.s: New file.
* testsuite/gas/z80/ez80_z80_all.d: New file.
* testsuite/gas/z80/ez80_z80_all.s: New file.
* testsuite/gas/z80/ez80_z80_suf.d: New file.
* testsuite/gas/z80/r800_extra.d: New file.
* testsuite/gas/z80/r800_extra.s: New file.
* testsuite/gas/z80/r800_ii8.d: New file.
* testsuite/gas/z80/r800_z80_doc.d: New file.
* testsuite/gas/z80/z180.d: New file.
* testsuite/gas/z80/z180.s: New file.
* testsuite/gas/z80/z180_z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.s: New file.
* testsuite/gas/z80/z80_ii8.d: New file.
* testsuite/gas/z80/z80_ii8.s: New file.
* testsuite/gas/z80/z80_in_f_c.d: New file.
* testsuite/gas/z80/z80_in_f_c.s: New file.
* testsuite/gas/z80/z80_op_ii_ld.d: New file.
* testsuite/gas/z80/z80_op_ii_ld.s: New file.
* testsuite/gas/z80/z80_out_c_0.d: New file.
* testsuite/gas/z80/z80_out_c_0.s: New file.
* testsuite/gas/z80/z80_reloc.d: New file.
* testsuite/gas/z80/z80_reloc.s: New file.
* testsuite/gas/z80/z80_sli.d: New file.
* testsuite/gas/z80/z80_sli.s: New file.
ld * Makefile.am: Add new target z80-elf
* configure.tgt: Likewise.
* emultempl/z80.em: Add support for eZ80 and Z180 architectures.
* emulparams/elf32z80.sh: New file.
* emultempl/z80elf.em: Likewise.
* testsuite/ld-z80/arch_ez80_adl.d: Likewise.
* testsuite/ld-z80/arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/arch_r800.d: Likewise.
* testsuite/ld-z80/arch_z180.d: Likewise.
* testsuite/ld-z80/arch_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_z180.d: Likewise.
* testsuite/ld-z80/labels.s: Likewise.
* testsuite/ld-z80/relocs.s: Likewise.
* testsuite/ld-z80/relocs_b_ez80.d: Likewise.
* testsuite/ld-z80/relocs_b_z80.d: Likewise.
* testsuite/ld-z80/relocs_f_z80.d: Likewise.
* testsuite/ld-z80/z80.exp: Likewise.
opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
I think it is past time to remove CR16C support. CR16C was added in
2004, and only for ld. gas and binutils support is lacking, and there
have been no commits to bfd/elf32-cr16c.c other than warning fixes or
global maintainers making changes to all targets. I see no maintainer
listed for CR16C, and no commits from anyone at NSC supporting the
target. Furthermore, at the time the CR16 support was added in 2007,
config.sub was changed upstream to no longer recognise cr16c as a
valid cpu. That means the CR16C ld support is only available as a
secondary target by configuring with, for example,
--enable-targets=all or --enable-targets=cr16c-unknown-elf. No
testing of the CR16C target is possible.
include/
* elf/cr16c.h: Delete.
bfd/
* cpu-cr16c.c: Delete.
* elf32-cr16c.c: Delete.
* Makefile.am,
* archures.c,
* config.bfd,
* configure.ac,
* reloc.c,
* targets.c: Remove cr16c support.
* Makefile.in,
* bfd-in2.h,
* configure,
* libbfd.h,
* po/SRC-POTFILES.in: Regenerate.
ld/
* emulparams/elf32cr16c.sh: Delete.
* scripttempl/elf32cr16c.sc: Delete.
* Makefile.am,
* configure.tgt: Remove cr16c support.
* NEWS: Mention removal of cr16c.
* Makefile.in,
* po/BLD-POTFILES.in: Regenerate.
This patch makes the elf64bpf emulation to use it's own linker script,
based on elf.sc. At the moment, the only change is that the BPF
executable doesn't define an entry symbol (BPF programs feature
several entry points scattered in several sections.)
This is a step towards the goal of generating proper ELF executables
that would be loaded by the kernel's libbpf. We are not there yet:
BPF "programs" should still be linked with -r.
This change removes a warning while linking executables, decreases the
number of unsupported tests in the target from 47 to 29, and increases
the number of expected passes from 104 to 145.
Regtested in x86_64 for all targets.
No regressions.
ld/ChangeLog:
2019-08-07 Jose E. Marchesi <jose.marchesi@oracle.com>
* scripttempl/elf64bpf.sc: Adapted from elf.sc.
* emulparams/elf64bpf.sh (SCRIPT_NAME): Use elf64bpf.
(EMBEDDED): Define.
* testsuite/ld-bpf/call-1.d: Do not expect a warning regarding an
undefined entry symbol.
* testsuite/ld-bpf/jump-1.d: Likewise.
* testsuite/ld-undefined/undefined.exp: Do not pass '-e entry' to
ld in BPF targets, and do not expect line number information.
* testsuite/ld-srec/srec.exp (run_srec_test): xfail s-record tests
in BPF targets.
__rel[a]_iplt_start and __rel[a]_iplt_end are defined to handle IFUNC in
static executables. For PIE, since IFUNC is handled as the part of the
normal dynamic relocation processing, there is no need to define these
symbols in PIE.
* scripttempl/elf.sc (CREATE_PIC): New. Set for CREATE_SHLIB or
CREATE_PIE.
(__rel_iplt_start): Don't define for CREATE_PIC.
(__rel_iplt_end): Likewise.
(__rela_iplt_start): Likewise.
(__rela_iplt_end): Likewise.
The special case for .init and .fini in update_wild_statements is
ineffective for .init or .fini wildcards inside other output sections.
The special case needs to be on the wildcard, not the output section.
This patch is belt and braces, both fixing update_wild_statements and
the scripts.
* scripttempl/alpha.sc, * scripttempl/armbpabi.sc,
* scripttempl/crisaout.sc, * scripttempl/elf32cr16.sc,
* scripttempl/elf32crx.sc, * scripttempl/elf32xc16x.sc,
* scripttempl/elf32xc16xl.sc, * scripttempl/elf32xc16xs.sc,
* scripttempl/elf64hppa.sc, * scripttempl/elf_chaos.sc,
* scripttempl/elfarc.sc, * scripttempl/elfarcv2.sc,
* scripttempl/elfd30v.sc, * scripttempl/elfm68hc11.sc,
* scripttempl/elfm68hc12.sc, * scripttempl/elfm9s12z.sc,
* scripttempl/elfmicroblaze.sc, * scripttempl/elfxgate.sc,
* scripttempl/elfxtensa.sc, * scripttempl/epiphany_4x4.sc,
* scripttempl/ft32.sc, * scripttempl/i386beos.sc,
* scripttempl/iq2000.sc, * scripttempl/mcorepe.sc,
* scripttempl/mep.sc, * scripttempl/mips.sc, * scripttempl/moxie.sc,
* scripttempl/pe.sc, * scripttempl/pep.sc, * scripttempl/ppcpe.sc,
* scripttempl/tic4xcoff.sc, * scripttempl/tic80coff.sc,
* scripttempl/v850.sc, * scripttempl/v850_rh850.sc,
* scripttempl/visium.sc, * scripttempl/xstormy16.sc: Add KEEP and
SORT_NONE to .init and .fini wildcards.
* scripttempl/elf32xc16x.sc,
* scripttempl/elf32xc16xl.sc,
* scripttempl/elf32xc16xs.sc: Add .fini wildcard.
* scripttempl/elf_chaos.sc: Add .init output section.
* scripttempl/elfd30v.sc: Remove duplicate .init.
* scripttempl/elfm68hc11.sc, * scripttempl/elfm68hc12.sc,
* scripttempl/elfm9s12z.sc, * scripttempl/elfxgate.sc: Remove
duplicate .init, and add .fini wildcard.
* scripttempl/ppcpe.sc (INIT, FINI): Delete.
* ldlang.c (update_wild_statements): Special case .init and
.fini in the wildcard, not the output section.
For ld -r, we generally set the VMA of sections to zero. This is done
to make the output of ld -r most similar to that output by the
assembler, which generally has sections starting at VMA zero. In some
cases that covers for backend bugs which would mis-handle relocatable
object files with non-zero section VMAs.
This patch fixes a few sections that didn't have zero VMAs for ld -r.
A missing zero on .note.gnu.build-id and .eh_frame_hdr doesn't matter
much since these are linker generated symbols only output on final
link, but it's good to be consistent.
* Makefile.am (ei386beos.c, ei386go32.c): Correct dependencies.
* Makefile.in: Regenerate.
* scripttempl/elf.sc (.note.gnu.build-id, .eh_frame_hdr): Set
address with ${RELOCATING-0}.
* scripttempl/arclinux.sc: Likewise.
* scripttempl/armbpabi.sc: Likewise.
* scripttempl/avr.sc: Likewise.
* scripttempl/elf64hppa.sc: Likewise.
* scripttempl/elf_chaos.sc: Likewise.
* scripttempl/elfarc.sc: Likewise.
* scripttempl/elfxtensa.sc: Likewise.
* scripttempl/mep.sc: Likewise.
* scripttempl/nds32elf.sc: Likewise.
* scripttempl/pru.sc: Likewise.
* scripttempl/elf32msp430.sc: Likewise, and for other sections.
* scripttempl/epiphany_4x4.sc: Similarly.
