We need to check the versioned __tls_get_addr symbol when looking up
"__tls_get_addr".
bfd/
PR ld/22721
* elfxx-x86.c (_bfd_x86_elf_link_check_relocs): Check the
versioned __tls_get_addr symbol.
ld/
PR ld/22721
* testsuite/ld-plugin/lto.exp: Run PR ld/22721 tests.
* testsuite/ld-plugin/pr22721.t: New file.
* testsuite/ld-plugin/pr22721a.s: Likewise.
* testsuite/ld-plugin/pr22721b.c: Likewise.
Also xfail ld-elf/group1.d for Solaris since _GLOBAL_OFFSET_TABLE_ is
always generated for Solaris as a global symbol after
.*: 0+1000 +0 +(NOTYPE|OBJECT) +WEAK +DEFAULT +. foo
instead of appending "#..." which will weaken the test.
* testsuite/ld-elf/group1.d: Also xfail Solaris.
Update ld-elf/linkinfo1[ab].d to accommodate slightly different PLT/GOT
order/layout for Solaris/x86 targets.
* testsuite/ld-elf/linkinfo1a.d: Updated for slightly different
PLT/GOT order/layout for Solaris/x86 targets.
* testsuite/ld-elf/linkinfo1b.d: Likewise.
Since all ELF linkers call check_relocs after opening all inputs, we
can fold after_allocation into before_allocation so that local dynamic
symbols will be placed before global dynamic symbols in .dynsym section.
This fixed:
FAIL: Common symbol override test (auxiliary shared object build)
FAIL: ld-elf/pr19617a
FAIL: ld-elf/pr19698
for i386-solaris2.12 and x86_64-solaris2.12 targets.
PR ld/22728
* emultempl/solaris2.em (elf_solaris2_after_allocation): Fold
into ...
(elf_solaris2_before_allocation): This.
(LDEMUL_AFTER_ALLOCATION): Removed.
Asking for ppc32 plt call stubs to be aligned at 32 byte boundaries
didn't quite work. For ld.bfd they were spaced 32 bytes apart, but
only started on a 16 byte boundary. ld.gold also didn't get it right.
Finding that bug made me check over the ppc64 plt stub alignment,
where I found that negative values for alignment (meaning align to
minimize boundary crossing) were not accepted. Since no one has
complained about that, I guess I could have removed the feature from
ld.bfd documentation, but I've opted instead to correct the code.
I've also added an optional alignment paramenter for ppc32
--plt-align, for some consistency with gold and ppc64 ld.bfd.
bfd/
* elf32-ppc.c (ppc_elf_create_glink): Correct alignment of .glink.
* elf64-ppc.c (ppc64_elf_size_stubs): Handle negative plt_stub_align.
(ppc64_elf_build_stubs): Likewise.
gold/
* powerpc.cc (param_plt_align): New function supplying default
--plt-align values. Use it..
(Stub_table::plt_call_align): ..here, and..
(Output_data_glink::global_entry_align): ..here.
(Stub_table::stub_align): Correct 32-bit minimum alignment.
ld/
* emultempl/ppc32elf.em: Support optional --plt-align arg.
* emultempl/ppc64elf.em: Support negative --plt-align arg.
This is in preparation for the next patch adding Spectre variant 2
mitigation for PowerPC and PowerPC64. Besides tidying code involved
in stub output (to reduce the number of places where bctr is output),
the patch adds some user visible features:
1) PowerPC64 ELFv2 global entry stubs now are aligned under the
control of --plt-align, with a default alignment of 32 bytes.
2) PowerPC64 __glink_PLTresolve is no longer padded out with nops.
3) PowerPC32 PLT stubs are aligned under the control of --plt-align,
with the default alignment being 16 bytes as before.
4) The PowerPC32 branch/nop table emitted before __glink_PLTresolve
is now smaller in many cases. It was sized incorrectly when the
__tls_get_addr_opt stub was used, and unnecessarily included space
for local ifuncs.
bfd/
* elf32-ppc.c (GLINK_ENTRY_SIZE): Add parameters, handle
__tls_get_addr_opt, and alignment sizing.
(TLS_GET_ADDR_GLINK_SIZE): Delete.
(is_nonpic_glink_stub): Don't use GLINK_ENTRY_SIZE.
(ppc_elf_get_synthetic_symtab): Recognize stubs spaced at 4, 6,
or 8 insns.
(ppc_elf_link_hash_table_create): Init new ppc_elf_params field.
(allocate_dynrelocs): Use new GLINK_ENTRY_SIZE.
(ppc_elf_size_dynamic_sections): Likewise. Size branch table
by PLT reloc count.
(write_glink_stub): Handle __tls_get_addr_opt stub.
Pad out to size given by GLINK_ENTRY_SIZE.
(ppc_elf_relocate_section): Adjust write_glink_stub call.
(ppc_elf_finish_dynamic_symbol): Likewise.
(ppc_elf_finish_dynamic_sections): Write PLTresolve without using
insn array since so many need rewriting.
* elf32-ppc.h (struct ppc_elf_params): Add plt_stub_align.
* elf64-ppc.c (GLINK_PLTRESOLVE_SIZE): Rename from
GLINK_CALL_STUB_SIZE. Add htab param and evaluate to size without
nops. Adjust all uses.
(ppc64_elf_get_synthetic_symtab): Don't use GLINK_CALL_STUB_SIZE
in glink_vma calculation.
(struct ppc_link_hash_table): Add global_entry section pointer.
(create_linkage_sections): Create separate section for global
entry stubs.
(PPC_LO, PPC_HI, PPC_HA): Move earlier.
(size_global_entry_stubs): Handle sizing for aligned stubs.
(ppc64_elf_size_dynamic_sections): Handle global_entry alloc,
and don't stash end of glink branch table in rawsize.
(ppc_build_one_stub): Rewrite stub size calculations.
(build_global_entry_stubs): Use new section.
(ppc64_elf_build_stubs): Don't pad __glink_PLTresolve with nops.
Build lazy link stubs out to end of section. Build global entry
stubs in new section.
gold/
* options.h (plt_align): Support for PowerPC32 too.
* powerpc.cc (Stub_table::stub_align): Heed --plt-align for 32-bit.
(Stub_table::plt_call_size, branch_stub_size): Tidy.
(Stub_table::plt_call_align): Implement using stub_align.
(Output_data_glink::global_entry_align): New function.
(Output_data_glink::global_entry_off): New function.
(Output_data_glink::global_entry_address): Use global_entry_off.
(Output_data_glink::pltresolve_size): New function, replacing
pltresolve_size_ constant. Update all uses.
(Output_data_glink::add_global_entry): Align offset.
(Output_data_glink::set_final_data_size): Use global_entry_align.
(Stub_table::do_write): Don't pad __glink_PLTrelsolve with nops.
Tidy stub output. Use global_entry_off.
ld/
* emultempl/ppc32elf.em (params): Init new field.
(enum ppc32_opt): New enum to define OPTION_* values. Add
OPTION_PLT_ALIGN and OPTION_NO_PLT_ALIGN.
(PARSE_AND_LIST_LONGOPTS): Handle new options.
(PARSE_AND_LIST_ARGS_CASES): Likewise.
(PARSE_AND_LIST_OPTIONS): Likewise. Break up help output.
* emultempl/ppc64elf.em (ppc_add_stub_section): Init alignment
correctly for negative --plt-stub-align.
* testsuite/ld-powerpc/elfv2exe.d,
* testsuite/ld-powerpc/elfv2so.d,
* testsuite/ld-powerpc/relbrlt.d,
* testsuite/ld-powerpc/relbrlt.s,
* testsuite/ld-powerpc/tlsexe.d,
* testsuite/ld-powerpc/tlsexe.r,
* testsuite/ld-powerpc/tlsexe32.d,
* testsuite/ld-powerpc/tlsexe32.g,
* testsuite/ld-powerpc/tlsexe32.r,
* testsuite/ld-powerpc/tlsexetoc.d,
* testsuite/ld-powerpc/tlsexetoc.r,
* testsuite/ld-powerpc/tlsopt5_32.d,
* testsuite/ld-powerpc/tlsso.d,
* testsuite/ld-powerpc/tlstocso.d: Update for changed stub order.
When I added this test I said I'd look at fixing more targets.
That hasn't happened yet, so xfail to tidy results.
* testsuite/ld-elf/elf.exp: xfail "pr22374 function pointer
initialization" for currently failing targets.
PowerPC64 has its own mark_dynamic_ref, which needs the same change as
made by d664fd41e1 to the generic ELF version. Some other targets
discard more than just .data, so allow for that too in expected ld
messages.
bfd/
PR ld/22649
* elf64-ppc.c (ppc64_elf_gc_mark_dynamic_ref): Ignore dynamic
references on forced local symbols.
ld/
PR ld/22649
* testsuite/ld-elf/pr22649.msg: Allow other messages.
* testsuite/ld-elf/shared.exp: Check that --gc-sections is
supported before running ld/22649 tests.
Currently we have no obvious way to revert the action of the "-z defs"
command line option. The "--unresolved-symbols=ignore-in-object-files"
does pretty much what is needed, but it is non-obvious and it also
touches the setting for reporting unresolved symbol references from
shared libraries. So I am proposing adding a "-z undefs" option to be
the inverse of "-z defs". (I thought that "-z nodefs" might be
confusing since it implies banning all definitions, rather than
allowing them).
In addition the description of the "-z defs" option in the linker
documentation is misleading in one place, where it says:
'defs'
Disallows undefined symbols in object files. Undefined
symbols in shared libraries are still allowed.
whereas later on it gets it right:
'-z defs'
Report unresolved symbol references from regular object files.
This is done even if the linker is creating a non-symbolic shared
library. The switch '--[no-]allow-shlib-undefined' controls the
behaviour for reporting unresolved references found in shared
libraries being linked in.
* emultempl/elf32.em (_handle_option): Add support for "-z undefs"
as the opposite of "-z defs".
* ld.texinfo: Document the new option. Update the description of
the -z defs option to make it clear that it does generate an error
if an undefined symbol reference is found in an object file whilst
creating a shared library.
* NEWS: Document this new feature.
Although they aren't passed to linker, we should get it right.
* testsuite/ld-elf/pr22393-2a.rd: Replace "-z textonly" with
"-z separate-code".
* testsuite/ld-elf/pr22393-2b.rd: Likewise.
* testsuite/ld-x86-64/pr22393-3a.rd: Likewise.
* testsuite/ld-x86-64/pr22393-3b.rd: Likewise.
The new "-z separate-code" option will generate separate code LOAD
segment which must be in wholly disjoint pages from any other data.
include/
PR ld/22393
* bfdlink.h (bfd_link_info): Add separate_code.
ld/
PR ld/22393
* NEWS: Mention "-z separate-code".
* emultempl/elf32.em (gld${EMULATION_NAME}_get_script): Get
builtin linker scripts and return linker scripts from disk for
"-z separate-code".
(gld${EMULATION_NAME}_handle_option): Handle "-z separate-code"
and "-z noseparate-code".
* genscripts.sh: Generate linker scripts for "-z separate-code".
(LD_FLAG): Set to *textonly for "-z separate-code".
* ld.texinfo: Document "-z separate-code".
* lexsup.c (elf_shlib_list_options): Add linker help messsages
for "-z separate-code" and "-z noseparate-code".
* scripttempl/elf.sc (SEPARATE_TEXT): New
(TEXT_SEGMENT_ALIGN): Likewise.
Use ${TEXT_SEGMENT_ALIGN} to align and pad text segment to
${MAXPAGESIZE}.
We should ignore dynamic references on forced local symbols during
garbage collection since they can never be referenced dynamically.
bfd/
PR ld/22649
* elflink.c (bfd_elf_gc_mark_dynamic_ref_symbol): Ignore dynamic
references on forced local symbols.
ld/
PR ld/22649
* testsuite/ld-elf/pr22649-1.s: New file.
* testsuite/ld-elf/pr22649-2a.s: Likewise.
* testsuite/ld-elf/pr22649-2b.s: Likewise.
* testsuite/ld-elf/pr22649.msg: Likewise.
* testsuite/ld-elf/shared.exp: Run ld/22649 tests.
We must keep all PREINIT_ARRAY, INIT_ARRAY as well as FINI_ARRAY sections
for ld -r --gc-sections.
bfd/
PR ld/22677
* elflink.c (bfd_elf_gc_sections): Keep all PREINIT_ARRAY,
INIT_ARRAY as well as FINI_ARRAY sections for ld -r --gc-sections.
ld/
PR ld/22677
* scripttempl/elf.sc (PREINIT_ARRAY): New.
Don't add .preinit_array for ld -r.
* testsuite/ld-elf/pr22677.d: New file.
* testsuite/ld-elf/pr22677.s: Likewise.
Previous commit removed all uses of the defsym field within the linker
expression union. This commit cleans up the now redundant state.
ld/ChangeLog:
* ldexp.h (union etree_union): Remove defsym field.
* ldexp.c (exp_assop): Remove defsym parameter, and use of defsym
parameter.
(exp_assign): Remove passing of defsym parameter.
(exp_defsym): Likewise.
(exp_provide): Likewise.
In a linker script, a sequence like this:
foo = ADDR (.some_section);
bar = foo;
PROVIDE (foo = 0);
will result in 'bar = ADDR (.some_section)' and 'foo = 0', which seems
like incorrect behaviour, foo is clearly defined elsewhere, and so the
PROVIDE should not trigger.
The problem is that an expression like this:
foo = ADDR (.some_section);
can't be evaluated until a late phase of the linker, due to the need
for the section '.some_section' to have been placed, then the PROVIDE
was being marked as being used during an earlier phase. At the end of
the link, both lines:
foo = ADDR (.some_section);
PROVIDE (foo = 0);
are active, and this causes the final value of 'foo' to be 0.
The solution proposed in this commit is that, during earlier phases of
the linker, when we see the expression 'foo = ADDR (.some_section);',
instead of ignoring the expression, we create a "fake" definition of
'foo'. The existence of this "fake" definition prevents the PROVIDE
from being marked used, and during the final phase the real definition
of 'foo' will replace the "fake" definition.
The new test provide-6 covers the exact case described above. The
provide-7 test is similar to the above, but using constant
expressions, this was never broken, but is added here to increase
coverage.
The provide-8 case also didn't fail before this commit, but I did
manage to break this case during development of this patch. This case
was only covered by a mmix test before, so I've added this here to
increase coverage.
ld/ChangeLog:
* ldexp.c (exp_fold_tree_1): Rework condition underwhich provide
nodes are ignored in the tree walk, and move the location at which
we change provide nodes into provided nodes.
(exp_init_os): Add etree_provided.
* testsuite/ld-scripts/provide-6.d: New file.
* testsuite/ld-scripts/provide-6.t: New file.
* testsuite/ld-scripts/provide-7.d: New file.
* testsuite/ld-scripts/provide-7.t: New file.
* testsuite/ld-scripts/provide-8.d: New file.
* testsuite/ld-scripts/provide-8.t: New file.
Find the ld-script/provide-*.d tests using a wildcard, then run them in
a loop. This will make it easier to add more tests in the future. Some
associated clean up is required.
ld/ChangeLog:
* testsuite/ld-scripts/provide-3.d: Add xfail directive.
* testsuite/ld-scripts/provide-4.d: Use new map file name.
* testsuite/ld-scripts/provide-5.d: Use new map file name.
* testsuite/ld-scripts/provide-4-map.d: Renamed to...
* testsuite/ld-scripts/provide-4.map: ...this.
* testsuite/ld-scripts/provide-5-map.d: Renamed to...
* testsuite/ld-scripts/provide-5.map: ...this.
* testsuite/ld-scripts/provide.exp: Move xfail into provide-3.d
file, and run tests in a loop.
Currently when recording a PROVIDE statement in a linker map file we
display something like:
PROVIDE (SYMBOL, VALUE)
However, in a linker script we write these statements like this:
PROVIDE (SYMBOL = VALUE);
This commit changes the output in the map file to be closer to linker
script format, the map file now contains:
PROVIDE (SYMBOL = VALUE)
The ';' is still missing from the end, but map files are not intended
to be valid linker script input, so adding the ';' just seems like
clutter.
ld/ChangeLog:
* ldexp.c (exp_print_tree): Use '=' instead of ',' when printing
PROVIDE statements.
* testsuite/ld-scripts/provide-4.map: Update expected output.
* testsuite/ld-scripts/provide-5.map: Likewise.
elf.sc has
if test -n "${RODATA_ADDR}"; then
RODATA_ADDR="\
SEGMENT_START(\"rodata-segment\", ${RODATA_ADDR}) + SIZEOF_HEADERS"
else
RODATA_ADDR="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
^^^^^^^^^^ Set RODATA_ADDR
RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${RODATA_ADDR})"
^^^^^^^^^^ Set RODATA_ADDR with ${RODATA_ADDR}
fi
if test -n "${SHLIB_RODATA_ADDR}"; then
SHLIB_RODATA_ADDR="\
SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR}) + SIZEOF_HEADERS"
else
SHLIB_RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR})"
^^^^^^^^^^ Set SHLIB_RODATA_ADDR
SHLIB_RODATA_ADDR="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
^^^^^^^^^^ Override SHLIB_RODATA_ADDR
fi
The order should be:
if test -n "${SHLIB_RODATA_ADDR}"; then
SHLIB_RODATA_ADDR="\
SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR}) + SIZEOF_HEADERS"
else
SHLIB_RODATA_ADDR="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
SHLIB_RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR})"
fi
PR ld/22696
* scripttempl/elf.sc: Fix the order of SHLIB_RODATA_ADDR.
ld/
* emulparams/elf32lriscv-defs.sh (GENERATE_SHLIB_SCRIPT): Move inside
case on $target, and don't set for riscv*-elf targets.
(GENERATE_PIE_SCRIPT): Likewise.
R_AARCH64_ABS64, R_AARCH64_ABS32 and R_AARCH64_ABS16 are data relocations
supported in AArch64 elf ABI.
R_AARCH64_ABS64 under LP64 is allowed in shared object and a dynamic relocation entry
will be generated. This allows the dynamic linker to do further symbol resolution.
R_AARCH64_ABS32 likewise is allowed in shared object, however under ILP32 abi.
The original behavior for R_AARCH64_ABS32 under LP64 is that, it's allowed
in shared object and silently resolved at static linking time.
No dynamic relocation entry is generate for it.
R_AARCH64_ABS16 is allowed in shared object under both L64 and ILP32.
It's resolved at static linking time as well.
Under LP64, the address should be 64-bit. R_AARCH64_ABS32 relocation indicates
an address that is only sized 32 bits which is meaningless in LP64 shared object.
It's useful to error out.
I have checked glibc dynamic linker code, R_AARCH64_ABS16 is not supported at all. So
R_AARCH64_ABS16 should be reject in shared object completely.
In this patch, R_AARCH64_ABS32 is rejected under LP64 in constant section of shared object.
R_AARCH64_ABS16 is rejected in constant section of shared object in both ABI.
This will sometimes provide useful information for buggy code.
PR 22465
* testsuite/ld-elf/interleave.s: Use .data sections and provide
section attrs.
* testsuite/ld-elf/interleave.ld: Discard other sections. Adjust
for changed section names.
elf32-mcore.c has no backend create_dynamic_sections function so can't
support shared libs.
* emulparams/elf32mcore.sh (GENERATE_SHLIB_SCRIPT): Don't define.
PR 22465
binutils/
* objcopy.c (copy_section): New local extra. If isection->lma not
exactly divisible by interleave, then bias from. Also adjust
osection->lma if necessary.
ld/
* testsuite/ld-elf/interleave-0.d, testsuite/ld-elf/interleave-4.d,
* testsuite/ld-elf/interleave.ld, testsuite/ld-elf/interleave.s: New.
These claim to support shared libs when configuring for <target>-linux
(in contrast to <target>-elf which doesn't support shared libs).
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Return true
for frv, lm32, m32r, microblaze, nds32 and or1k linux targets.
This adds the test I was using when testing 60d67dc8.
* testsuite/ld-elfweak/alias.c,
* testsuite/ld-elfweak/alias.dat,
* testsuite/ld-elfweak/aliasmain.c,
* testsuite/ld-elfweak/weakref1.c,
* testsuite/ld-elfweak/weakref2.c: New test.
* testsuite/ld-elfweak/elfweak.exp: Run it. Don't return on fails,
attempt other tests.
In early October, HJ Lu added support for a number of targets to "Dump
dynamic relocation in read-only section with minfo". This extends
that support to more targets, displays the symbol involved, and splits
the existing function that sets TEXTREL into a "readonly_dynrelocs"
and "maybe_set_textrel" function. I'll need "readonly_dynrelocs" if I
ever get around to fixing "pr22374 function pointer initialization"
fails.
am33_2.0, arc, bfin, hppa64, mn10300, and nios2 fail to mark a binary
needing text relocations with DT_TEXTREL. That's not good. xtensa also
fails to do so but complains about "dangerous relocation: dynamic
relocation in read-only section" so I reckon that is fine and have
marked the test as an xfail. The other targets need maintainer
attention.
Curiously, the map file dump wasn't added for x86, so the map test
currently fail on x86. It also fails on alpha, am33_2.0, arc, bfin,
hppa64, ia64, m68k, mips, mn10300, nios2, score and vax. cris
complains with "tmpdir/textrel.o, section .rodata: relocation
R_CRIS_32 should not be used in a shared object; recompile with -fPIC"
so I've marked it as an xfail.
bfd/
* elf32-hppa.c (maybe_set_textrel): Print symbol for map file output.
* elf32-ppc.c (maybe_set_textrel): Likewise.
* elf64-ppc.c (maybe_set_textrel): Likewise.
* elf32-arm.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(elf32_arm_readonly_dynrelocs): ..this.
* elf32-lm32.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-m32r.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-metag.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-nds32.c: Delete unnecessary forward declarations.
(readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-or1k.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-s390.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-sh.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-tic6x.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(elf32_tic6x_readonly_dynrelocs): ..this.
* elf32-tilepro.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf64-s390.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfnn-aarch64.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(aarch64_readonly_readonly_dynrelocs): ..this.
* elfnn-riscv.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfxx-sparc.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfxx-tilegx.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
ld/
* testsuite/ld-elf/shared.exp: Run new textrel tests.
* testsuite/ld-elf/textrel.map: New file.
* testsuite/ld-elf/textrel.rd: New file.
* testsuite/ld-elf/textrel.s: New file.
* testsuite/ld-elf/textrel.warn: New file.
ASFLAGS should be restored after any modification. Fixes
metag-linux +FAIL: Long branch stub
metag-linux +FAIL: Long branch stub (PIC, app)
mn10300-elf +FAIL: difference of two same-section symbols where the difference is held in another section
mn10300-elf +FAIL: relaxation and alignment directives
PR 22471
* testsuite/ld-elf/shared.exp: Save and restore ASFLAGS.
