cpu/ChangeLog:
2020-06-02 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (define-bpf-isa): Set base-insn-bitsize to 64.
* bpf.opc (bpf_print_insn): Do not set endian_code here.
gas/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c (md_begin): Pass CGEN_CPU_OPEN_INSN_ENDIAN to
bpf_cgen_cpu_open.
(md_assemble): Remove no longer needed hack.
opcodes/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* disassemble.c (disassemble_init_for_target): Set endian_code for
bpf targets.
* bpf-desc.c: Regenerate.
* bpf-opc.c: Likewise.
* bpf-dis.c: Likewise.
The CGEN support code in opcodes accesses instruction contents using a
couple of functions defined in cgen-opc.c: cgen_get_insn_value and
cgen_put_insn_value. These functions use the "instruction endianness"
in the CPU description to order the read/written bytes.
The process of writing an instruction to the object file is:
a) cgen_put_insn_value ;; Writes out the opcodes.
b) ARCH_cgen_insert_operand
insert_normal
insert_1
cgen_put_insn_value ;; Writes out the bytes of the
;; operand.
Likewise, the process of reading an instruction from the object file
is:
a) cgen_get_insn_value ;; Reads the opcodes.
b) ARCH_cgen_extract_operand
extract_normal
extract_1
cgen_get_insn_value ;; Reads in the bytes of the
;; operand.
As can be seen above, cgen_{get,put}_insn_value are used to both
process the instruction opcodes (the constant fields conforming the
base instruction) and also the values of the instruction operands,
such as immediates.
This is problematic for architectures in which the endianness of
instructions is different to the endianness of data. An example is
BPF, where instructions are always encoded big-endian but the data may
be either big or little.
This patch changes the cgen_{get,put}_insn_value functions in order to
get an extra argument with the endianness to use, and adapts the
existin callers to these functions in order to provide cd->endian or
cd->insn_endian, whatever appropriate. Callers like extract_1 and
insert_1 pass cd->endian (since they are reading/writing operand
values) while callers reading/writing the base instruction pass
cd->insn_endian instead.
A few little adjustments have been needed in some existing CGEN based
ports:
* The BPF assembler uses cgen_put_insn_value. It has been adapted to
pass the new endian argument.
* The mep port has code in mep.opc that uses cgen_{get,put}_insn_value.
It has been adapted to pass the new endianargument. Ditto for a
call in the assembler.
Tested with --enable-targets=all.
Regested in all supported targets.
No regressions.
include/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/cgen.h: Get an `endian' argument in both
cgen_get_insn_value and cgen_put_insn_value.
opcodes/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* cgen-opc.c (cgen_get_insn_value): Get an `endian' argument.
(cgen_put_insn_value): Likewise.
(cgen_lookup_insn): Pass endianness to cgen_{get,put}_insn_value.
* cgen-dis.in (print_insn): Likewise.
* cgen-ibld.in (insert_1): Likewise.
(insert_1): Likewise.
(insert_insn_normal): Likewise.
(extract_1): Likewise.
* bpf-dis.c: Regenerate.
* bpf-ibld.c: Likewise.
* bpf-ibld.c: Likewise.
* cgen-dis.in: Likewise.
* cgen-ibld.in: Likewise.
* cgen-opc.c: Likewise.
* epiphany-dis.c: Likewise.
* epiphany-ibld.c: Likewise.
* fr30-dis.c: Likewise.
* fr30-ibld.c: Likewise.
* frv-dis.c: Likewise.
* frv-ibld.c: Likewise.
* ip2k-dis.c: Likewise.
* ip2k-ibld.c: Likewise.
* iq2000-dis.c: Likewise.
* iq2000-ibld.c: Likewise.
* lm32-dis.c: Likewise.
* lm32-ibld.c: Likewise.
* m32c-dis.c: Likewise.
* m32c-ibld.c: Likewise.
* m32r-dis.c: Likewise.
* m32r-ibld.c: Likewise.
* mep-dis.c: Likewise.
* mep-ibld.c: Likewise.
* mt-dis.c: Likewise.
* mt-ibld.c: Likewise.
* or1k-dis.c: Likewise.
* or1k-ibld.c: Likewise.
* xc16x-dis.c: Likewise.
* xc16x-ibld.c: Likewise.
* xstormy16-dis.c: Likewise.
* xstormy16-ibld.c: Likewise.
gas/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* cgen.c (gas_cgen_finish_insn): Pass the endianness to
cgen_put_insn_value.
(gas_cgen_md_apply_fix): Likewise.
(gas_cgen_md_apply_fix): Likewise.
* config/tc-bpf.c (md_apply_fix): Pass data endianness to
cgen_put_insn_value.
* config/tc-mep.c (mep_check_ivc2_scheduling): Pass endianness to
cgen_put_insn_value.
cpu/ChangeLog:
2020-06-02 Jose E. Marchesi <jose.marchesi@oracle.com>
* mep.opc (print_slot_insn): Pass the insn endianness to
cgen_get_insn_value.
This patch adds support for a new CGEN_OPEN_INSN_ENDIAN argument
for @arch@_cgen_cpu_open. This is useful for architectures in
which the endianness of the instruction words is not the same
than the endianness used for data.
An accompanying patch has been sent to the CGEN mailing list that
adds support for this argument on the CGEN side [1]. Its been
already pre-approved [2], and will be applied simultaneously with
this binutils series.
[1] https://sourceware.org/pipermail/cgen/2020q2/002733.html
[2] https://sourceware.org/pipermail/cgen/2020q2/002737.html
include/ChangeLog:
2020-06-04 Jose E. Marchesi <jemarch@gnu.org>
* opcode/cgen.h (enum cgen_cpu_open_arg): New value
CGEN_CPU_OPEN_INSN_ENDIAN.
opcodes/ChangeLog:
2020-06-04 Jose E. Marchesi <jemarch@gnu.org>
* cgen-dis.in (cpu_desc_list): New field `insn_endian'.
(print_insn_): Handle instruction endian.
* bpf-dis.c: Regenerate.
* bpf-desc.c: Regenerate.
* epiphany-dis.c: Likewise.
* epiphany-desc.c: Likewise.
* fr30-dis.c: Likewise.
* fr30-desc.c: Likewise.
* frv-dis.c: Likewise.
* frv-desc.c: Likewise.
* ip2k-dis.c: Likewise.
* ip2k-desc.c: Likewise.
* iq2000-dis.c: Likewise.
* iq2000-desc.c: Likewise.
* lm32-dis.c: Likewise.
* lm32-desc.c: Likewise.
* m32c-dis.c: Likewise.
* m32c-desc.c: Likewise.
* m32r-dis.c: Likewise.
* m32r-desc.c: Likewise.
* mep-dis.c: Likewise.
* mep-desc.c: Likewise.
* mt-dis.c: Likewise.
* mt-desc.c: Likewise.
* or1k-dis.c: Likewise.
* or1k-desc.c: Likewise.
* xc16x-dis.c: Likewise.
* xc16x-desc.c: Likewise.
* xstormy16-dis.c: Likewise.
* xstormy16-desc.c: Likewise.
binutils/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* objdump.c (disassemble_data): Set disasm_info.endian_code to
disasm_info.endian after the latter is initialized to the
endianness reported by BFD.
This patch adds semantic RTL descriptions to the eBPF instructions
defined in cpu/bpf.cpu. It also contains a couple of minor
improvements.
Tested in bpf-unknown-none targets.
No regressions.
cpu/ChangeLog:
2020-05-28 Jose E. Marchesi <jose.marchesi@oracle.com>
David Faust <david.faust@oracle.com>
* bpf.cpu (define-alu-insn-un): Add definitions of semantics.
(define-alu-insn-mov): Likewise.
(daib): Likewise.
(define-alu-instructions): Likewise.
(define-endian-insn): Likewise.
(define-lddw): Likewise.
(dlabs): Likewise.
(dlind): Likewise.
(dxli): Likewise.
(dxsi): Likewise.
(dsti): Likewise.
(define-ldstx-insns): Likewise.
(define-st-insns): Likewise.
(define-cond-jump-insn): Likewise.
(dcji): Likewise.
(define-condjump-insns): Likewise.
(define-call-insn): Likewise.
(ja): Likewise.
("exit"): Likewise.
(define-atomic-insns): Likewise.
(sem-exchange-and-add): New macro.
* bpf.cpu ("brkpt"): New instruction.
(bpfbf): Set word-bitsize to 32 and insn-endian big.
(h-gpr): Prefer r0 to `a' and r6 to `ctx'.
(h-pc): Expand definition.
* bpf.opc (bpf_print_insn): Set endian_code to BIG.
opcodes/ChangeLog:
2020-05-28 Jose E. Marchesi <jose.marchesi@oracle.com>
David Faust <david.faust@oracle.com>
* bpf-desc.c: Regenerate.
* bpf-opc.h: Likewise.
* bpf-opc.c: Likewise.
* bpf-dis.c: Likewise.
This patch adds support for the Linux kernel eBPF architecture to the
opcodes. The port is based on CGEN.
opcodes/ChangeLog:
2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure.ac (SHARED_DEPENDENCIES): Add case for bfd_bpf_arch.
* configure: Regenerated.
* Makefile.am: Add rules for the files generated from cpu/bpf.cpu
and cpu/bpf.opc.
(HFILES): Add bpf-desc.h and bpf-opc.h.
(TARGET_LIBOPCODES_CFILES): Add bpf-asm.c, bpf-desc.c, bpf-dis.c,
bpf-ibld.c and bpf-opc.c.
(BPF_DEPS): Define.
* Makefile.in: Regenerated.
* disassemble.c (ARCH_bpf): Define.
(disassembler): Add case for bfd_arch_bpf.
(disassemble_init_for_target): Likewise.
(enum epbf_isa_attr): Define.
* disassemble.h: extern print_insn_bpf.
* bpf-asm.c: Generated.
* bpf-opc.h: Likewise.
* bpf-opc.c: Likewise.
* bpf-ibld.c: Likewise.
* bpf-dis.c: Likewise.
* bpf-desc.h: Likewise.
* bpf-desc.c: Likewise.
