2008-01-03 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Change opcode set for avr3,
at90usb82, at90usb162.
* doc/c-avr.texi: Change architecture grouping for at90usb82,
at90usb162.
These changes support the new avr35 architecture group in gcc.
/include:
2008-01-03 Eric B. Weddington <eric.weddington@atmel.com>
* opcode/avr.h (AVR_ISA_USB162): Add new opcode set.
(AVR_ISA_AVR3): Likewise.
* mn10300-tdep.c (set_reg_offsets, mn10300_analyze_prologue): Use
get_frame_arch to get at the current_architecture. Update AM33_MODE
call.
(mn10300_analyze_prologue): Add gdbarch as parameter. Update caller.
(mn10300_frame_unwind_cache): Use get_frame_arch to get at the current
architecture.
(set_reg_offsets, mn10300_analyze_prologue): Fix indentation.
parameter.
* amd64-nat.c (amd64_native_gregset_supplies_p): Likewise.
(amd64_native_gregset_reg_offset): Add gdbarch as parameter. Replace
current_gdbarch by gdbarch. Update caller.
* amd64-linux-nat.c (amd64_linux_fetch_inferior_registers)
(amd64_linux_store_inferior_registers): Use get_regcache_arch to get at
the current architecture. Update calls of
amd64_native_gregset_supplies_p.
* amd64bsd-nat.c (amd64bsd_fetch_inferior_registers)
(amd64bsd_store_inferior_registers): Likewise.
* i386-dis.c (Mx): New.
(PREFIX_0FC3): Likewise.
(PREFIX_0FC7_REG_6): Updated.
(dis386_twobyte): Use PREFIX_0FC3.
(prefix_table): Add PREFIX_0FC3. Use Mq on movntq and movntsd.
Use Mx on movntps, movntpd, movntdq and movntdqa. Use Md on
movntss.
PR 5604
* elf-bfd.h (struct elf_backend_data): Add gc_keep. Remove param
names from others.
(_bfd_elf_gc_keep): Declare.
* elfxx-target.h (elf_backend_gc_keep): Define.
(elfNN_bed): Init new field.
* elflink.c (_bfd_elf_gc_keep): New function.
(bfd_elf_gc_sections): Call gc_keep.
* elf64-ppc.c (elf_backend_gc_keep): Define.
(struct _ppc64_elf_section_data): Move .opd related fields to
a struct so they don't occupy the same storage. Adjust accesses
throughout file.
(ppc64_elf_gc_keep): New function, split out from..
(ppc64_elf_gc_mark_hook): ..here. Don't call _bfd_elf_gc_mark
to mark .opd section, just set gc_mark.
(ppc64_elf_edit_opd): Remove no_opd_opt parm. Don't set opd->adjust
unless we are changing .opd. Test non-NULL opd->adjust at all
accesses throughout file.
* elf64-ppc.h (ppc64_elf_edit_opd): Update prototype.
ld/
PR 5604
* ldlang.c (lang_gc_sections): Move code to set SEC_KEEP on entry
syms to _bfd_elf_gc_keep.
* emultempl/ppc64elf.em (ppc_before_allocation): Don't call
ppc64_elf_edit_opd if no_opd_opt.
when the .debug_info section could not be loaded/parsed.
(process_debug_info): Display the length of the compilation unit
in hex, so that it corresponds with the offsets that will follow.
Tell the user if the length was 32-bit or 64-bit.
If a DIE abbreviation could not be found, tell the user the offset
of the DIE.
(free_debug_memory): Do not attempt to free any entries in the
debug_information array if num_debug_info_entries is set to
DEBUG_INFO_UNAVAILABLE.
version value when reporting unrecognised DWARF version numbers.
(load_debug_info): Remember a failed attempt to load and parse the
.debug_info section and do not repeat such attempts.
(display_debug_lines): Check the return value from load_debug_info
and return whilst displaying a warning message if the load failed.
(display_debug_loc): Likewise.
(display_debug_ranges): Likewise.
(alpha_sigtramp_register_address): Add gdbarch as parameter. Replace
current_gdbarch by gdbarch.
(alpha_heuristic_frame_unwind_cache): Use get_frame_arch to get at the
current architecture by frame_info. Update alpha_heuristic_proc_start
call.
(alpha_sigtramp_frame_this_id, alpha_sigtramp_frame_prev_register): Use
get_frame_arch to get at the current architecture by frame_info. Update
alpha_sigtramp_register_address call.
* arm-tdep.c (thumb_scan_prologue): Add gdbarch as parameter and replace
current_gdbarch by gdbarch. Update caller.
(convert_to_extended, convert_from_extended): Add endianess parameter
for comparison. Update caller.
(arm_extract_return_value, arm_store_return_value): Use
get_regcache_arch to get at the current architecture.
* cris-tdep.c (cris_register_size): Add gdbarch as parameter. Replace
current_gdbarch by gdbarch. Update caller.
(cris_gdb_func, move_to_preg_op, none_reg_mode_move_from_preg_op): Add
gdbarch as parameter. Update caller. Replace current_gdbarch by gdbarch.
* h8300-tdep.c (E_PSEUDO_CCR_REGNUM, E_PSEUDO_EXR_REGNUM, BINWORD): Add
gdbarch as parameter. Update caller.
(h8300_init_frame_cache): Add gdbarch as parameter. Replace
current_gdbarch by gdbarch. Update caller.
* hppa-tdep.c (skip_prologue_hard_way): Add gdbarch as parameter and
update caller. Replace current_gdbarch by gdbarch.
* m32c-tdep.c (m32c_skip_trampoline_code): Use get_frame_arch to get at
the current architecture. Replace current_gdbarch by gdbarch.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise.
(STACK_CORRECTION, USE_PAGE_REGISTER): Replace M6811_TDEP by its
expression. Add gdbarch as parameter and replace current_gdbarch with
it. Update caller.
(M6811_TDEP): Remove.
(m68hc11_frame_prev_register): Use get_frame_arch to get at the current
architecture.
(m68hc11_scan_prologue): Add gdbarch as parameter. Replace
current_gdbarch by gdbarch. Update caller.
* m68k-tdep.c (m68k_analyze_prologue): Add gdbarch as parameter and
update caller.
(m68k_analyze_register_saves): Likewise. Also replace current_gdbarch
by gdbarch.
* rs6000-tdep.c (skip_prologue): Add gdbarch as parameter and update
caller. Relace current_gdbarch by gdbarch.
(altivec_register_p, spe_register_p): Likewise.
* ppc-tdep.h (altivec_register_p, spe_register_p): Add gdbarch as
parameter.
* ppc-linux-nat.c (fetch_register, store_register): Update caller of
altivec_register_p and spe_register_p.
* score-tdep.c (score_fetch_inst): Add gdbarch as parameter. Update
caller. Replace current_gdbarch by gdbarch.
(score_analyze_prologue): use get_frame_arch to get at the current
architecture.
* sparc-tdep.h (sparc_analyze_prologue): Add gdbarch as parameter.
* sparc-tdep.c (sparc_analyze_prologue): Likewise. Replace
current_gdbarch by gdbarch. Update caller.
(sparc_frame_cache): Use get_frame_arch to get at the current
architecture.
* sparce64-tdep.c (sparc64_skip_prologue): Update call of
sparc_analyze_prologue.
* mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Add gdbarch as
parameter.
2008-01-11 Tristan Gingold <gingold@adacore.com>
Eric Botcazou <ebotcazou@adacore.com>
* ldlang.c (lang_end): Warns if the entry point is not found when
--gc-sections.
Emit an error if no root is specified when --gc-sections -r.
* ld.texinfo (Options): Document that --gc-sections is compatible
with -r and -q.
* ldmain.c (main): Do not error out if -r and --gc-sections.
* scripttempl/elf.sc: Emit ENTRY command only if relocating.
ld/testsuite:
2008-01-11 Tristan Gingold <gingold@adacore.com>
* lib/ld-lib.exp (check_gc_sections_available): Now available on
VxWorks.
* ld-gc: New directory for testing --gc-sections.
* ld-gc/gc.c: New file.
* ld-gc/gc.exp: New file.
* ld-gc/noent.s: New file.
* ld-gc/noent.d: New file.
2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/nops.s: Add more tests with opcodes from 0x0f19
to 0x0f1f.
* gas/i386/x86-64-nops.s: Likewise.
* gas/i386/nops.d: Updated.
* gas/i386/x86-64-nops.d: Likewise.
opcodes/
2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (REG_0F0E): Renamed to REG_0F0D.
(REG_0F18): Updated.
(reg_table): Updated.
(dis386_twobyte): Updated. Use "nopQ" on 0x19 to 0x1e.
(twobyte_has_modrm): Set 1 for 0x19 to 0x1e.
