359 Commits

Author	SHA1	Message	Date
Stafford Horne	c8e98e3692	or1k: Add the l.adrp insn and supporting relocations ... This patch adds the new instruction and relocation as per proposal: https://openrisc.io/proposals/ladrp This is to be added to the spec in an upcoming revision. The new instruction l.adrp loads the page offset of the current instruction offset by a 21-bit immediate shifted left 13-bits. This is meant to be used with a 13-bit lower bit page offset. This allows us to free up the got register r16. l.adrp r3, foo l.ori r4, r3, po(foo) l.lbz r5, po(foo)(r3) l.sb po(foo)(r3), r6 The relocations we add are: - BFD_RELOC_OR1K_PLTA26 For PLT jump relocation with PLT entry asm: plta() implemented using l.ardp, meaning no need for r16 (the GOT reg) - BFD_RELOC_OR1K_GOT_PG21 Upper 21-bit Page offset got address asm: got() - BFD_RELOC_OR1K_TLS_GD_PG21 Upper 21-bit Page offset with TLS General asm: tlsgd() Dynamic calculation - BFD_RELOC_OR1K_TLS_LDM_PG21 Upper 21-bit Page offset with TLS local asm: tlsldm() dynamic calculation - BFD_RELOC_OR1K_TLS_IE_PG21 Upper 21-bit Page offset with TLS Initial asm: gottp() Executable calculation - BFD_RELOC_OR1K_PCREL_PG21 Default relocation for disp21 (l.adrp instructions) - BFD_RELOC_OR1K_LO13 low 13-bit page offset relocation asm: po() i.e. mem loads, addi etc - BFD_RELOC_OR1K_SLO13 low 13-bit page offset relocation asm: po() i.e. mem stores, with split immediate - BFD_RELOC_OR1K_GOT_LO13, low 13-bit page offset with GOT calcs asm: gotpo() - BFD_RELOC_OR1K_TLS_GD_LO13 Lower 13-bit offset with TLS GD calcs asm: tlsgdpo() - BFD_RELOC_OR1K_TLS_LDM_LO13 Lower 13-bit offset with TLS LD calcs asm: tlsldmpo() - BFD_RELOC_OR1K_TLS_IE_LO13 Lower 13-bit offset with TLS IE calcs asm: gottppo() bfd/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * bfd-in2.h: Regenerated. * elf32-or1k.c: (or1k_elf_howto_table): Fix formatting for R_OR1K_PLT26, Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26. (or1k_reloc_map): Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_GOT_LO13, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_LO13, BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_PLTA26. (elf_or1k_link_hash_table): Add field saw_plta. (or1k_final_link_relocate): Add value calculations for new relocations. (or1k_elf_relocate_section): Add section relocations for new relocations. (or1k_write_plt_entry): New function. (or1k_elf_finish_dynamic_sections): Add support for PLTA relocations using new l.adrp instruction. Cleanup PLT relocation code generation. * libbfd.h: Regenerated. * reloc.c: Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_GOT_LO13, BFD_RELOC_OR1K_PLTA26, BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_TLS_IE_LO13. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k.opc (parse_disp26): Add support for plta() relocations. (parse_disp21): New function. (or1k_rclass): New enum. (or1k_rtype): New enum. (or1k_imm16_relocs): Define new PO and SPO relocation mappings. (parse_reloc): Add new po(), gotpo() and gottppo() for LO13 relocations. (parse_imm16): Add support for the new 21bit and 13bit relocations. * or1korbis.cpu (f-disp26): Don't assume SI. (f-disp21): New pc-relative 21-bit 13 shifted to right. (insn-opcode): Add ADRP. (l-adrp): New instruction. gas/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * config/tc-or1k.c (or1k_apply_fix): Add BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_TLS_IE_LO13. * testsuite/gas/or1k/allinsn.s: Add test for l.adrp. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions. * testsuite/gas/or1k/reloc-1.s: Add tests to generate R_OR1K_PLTA26, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLD_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_LO13, R_OR1K_SLO13 relocations. * testsuite/gas/or1k/reloc-1.d: Add relocation results for tests. * testsuite/gas/or1k/reloc-2.s: Add negative tests for store to gotpo(). * testsuite/gas/or1k/reloc-2.l: Add expected error test results. ld/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/ld-or1k/or1k.exp: Add test cases for plt generation. * testsuite/ld-or1k/plt1.dd: New file. * testsuite/ld-or1k/plt1.s: New file. * testsuite/ld-or1k/plt1.x.dd: New file. * testsuite/ld-or1k/plta1.dd: New file. * testsuite/ld-or1k/plta1.s: New file. * testsuite/ld-or1k/pltlib.s: New file. include/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k-asm.c: Regenerated. * or1k-desc.c: Regenerated. * or1k-desc.h: Regenerated. * or1k-dis.c: Regenerated. * or1k-ibld.c: Regenerated. * or1k-opc.c: Regenerated. * or1k-opc.h: Regenerated. * or1k-opinst.c: Regenerated.	2018-10-05 11:41:41 +09:00
Richard Henderson	1c4f3780f7	or1k: Add relocations for high-signed and low-stores ... This patch adds the following target relocations: - BFD_RELOC_HI16_S High 16-bit relocation, for used with signed asm: ha() lower. - BFD_RELOC_HI16_S_GOTOFF High 16-bit GOT offset relocation for local asm: gotoffha() symbols, for use with signed lower. - BFD_RELOC_OR1K_TLS_IE_AHI16 High 16-bit TLS relocation with initial asm: gottpoffha() executable calculation, for use with signed lower. - BFD_RELOC_OR1K_TLS_LE_AHI16 High 16-bit TLS relocation for local executable asm: tpoffha() variables, for use with signed lower. - BFD_RELOC_OR1K_SLO16 Split lower 16-bit relocation, used with asm: lo() OpenRISC store instructions. - BFD_RELOC_OR1K_GOTOFF_SLO16 Split lower 16-bit GOT offset relocation for asm: gotofflo() local symbols, used with OpenRISC store instructions. - BFD_RELOC_OR1K_TLS_LE_SLO16 Split lower 16-bit relocation for TLS local asm: tpofflo() executable variables, used with OpenRISC store instructions. bfd/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * bfd-in2.h: Regenerated. * elf32-or1k.c (N_ONES): New macro. (or1k_elf_howto_table): Fix R_OR1K_PLT26 to complain on overflow. Add definitions for R_OR1K_TLS_TPOFF, R_OR1K_TLS_DTPOFF, R_OR1K_TLS_DTPMOD, R_OR1K_AHI16, R_OR1K_GOTOFF_AHI16, R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16, R_OR1K_SLO16, R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16. (or1k_reloc_map): Add entries for BFD_RELOC_HI16_S, BFD_RELOC_LO16_GOTOFF, BFD_RELOC_HI16_GOTOFF, BFD_RELOC_HI16_S_GOTOFF, BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16, BFD_RELOC_OR1K_SLO16, BFD_RELOC_OR1K_GOTOFF_SLO16, BFD_RELOC_OR1K_TLS_LE_SLO16. (or1k_reloc_type_lookup): Change search loop to start ad index 0 and also check results before returning. (or1k_reloc_name_lookup): Simplify loop to use R_OR1K_max as index limit. (or1k_final_link_relocate): New function. (or1k_elf_relocate_section): Add support for new AHI and SLO relocations. Use or1k_final_link_relocate instead of generic _bfd_final_link_relocate. (or1k_elf_check_relocs): Add support for new AHI and SLO relocations. * reloc.c: Add new enums for BFD_RELOC_OR1K_SLO16, BFD_RELOC_OR1K_GOTOFF_SLO16, BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16, BFD_RELOC_OR1K_TLS_LE_SLO16. Remove unused BFD_RELOC_OR1K_GOTOFF_HI16 and BFD_RELOC_OR1K_GOTOFF_LO16. * libbfd.h: Regenerated. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k.opc: Add RTYPE_ enum. (INVALID_STORE_RELOC): New string. (or1k_imm16_relocs): New array array. (parse_reloc): New static function that just does the parsing. (parse_imm16): New static function for generic parsing. (parse_simm16): Change to just call parse_imm16. (parse_simm16_split): New function. (parse_uimm16): Change to call parse_imm16. (parse_uimm16_split): New function. * or1korbis.cpu (simm16-split): Change to use new simm16_split. (uimm16-split): Change to use new uimm16_split. gas/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/gas/or1k/allinsn.d (l_ha): Add result for ha() relocation. * testsuite/gas/or1k/allinsn.s (l_ha): Add test for ha() relocations. * testsuite/gas/or1k/allinsn.exp: Renamed to or1k.exp. * testsuite/gas/or1k/or1k.exp: Add reloc-2 list test. * testsuite/gas/or1k/reloc-1.d: New file. * testsuite/gas/or1k/reloc-1.s: New file. * testsuite/gas/or1k/reloc-2.l: New file. * testsuite/gas/or1k/reloc-2.s: New file. include/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_AHI16, R_OR1K_GOTOFF_AHI16, R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16, R_OR1K_SLO16, R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16. ld/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/ld-or1k/offsets1.d: New file. * testsuite/ld-or1k/offsets1.s: New file. * testsuite/ld-or1k/or1k.exp: New file. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k-asm.c: Regenerate.	2018-10-05 11:41:40 +09:00
Nick Clifton	fbaf61ad52	Andes Technology has good news for you, we plan to update the nds32 port of binutils on upstream! ... We have not only removed all unsupported and obsolete code, but also supported lost of new features, including better link-time relaxations and TLS implementations. Besides, the files generated by the newly assembler and linker usually get higher performance and more optimized code size. ld * emultempl/nds32elf.em (hyper_relax): New variable. (nds32_elf_create_output_section_statements): the parameters of bfd_elf32_nds32_set_target_option (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Add new option --mhyper-relax. * emultempl/nds32elf.em (nds32_elf_after_open): Updated. * emultempl/nds32elf.em (tls_desc_trampoline): New variable. * (nds32_elf_create_output_section_statements): Updated. * (nds32_elf_after_parse): Disable relaxations when PIC is enable. * (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Add new option --m[no-]tlsdesc-trampoline. include * elf/nds32.h: Remove the unused target features. * dis-asm.h (disassemble_init_nds32): Declared. * elf/nds32.h (E_NDS32_NULL): Removed. (E_NDS32_HAS_DSP_INST, E_NDS32_HAS_ZOL): New. * opcode/nds32.h: Ident. (N32_SUB6, INSN_LW): New macros. (enum n32_opcodes): Updated. * elf/nds32.h: Doc fixes. * elf/nds32.h: Add R_NDS32_LSI. * elf/nds32.h: Add new relocations for TLS. gas * config/tc-nds32.c: Remove the unused target features. (nds32_relax_relocs, md_pseudo_table, nds32_elf_record_fixup_exp, nds32_set_elf_flags_by_insn, nds32_insert_relax_entry, nds32_apply_fix): Likewise. (nds32_no_ex9_begin): Removed. * config/tc-nds32.c (add_mapping_symbol_for_align, make_mapping_symbol, add_mapping_symbol): New functions. * config/tc-nds32.h (enum mstate): New. (nds32_segment_info_type): Likewise. * configure.ac (--enable-dsp-ext, --enable-zol-ext): New options. * config.in: Regenerated. * configure: Regenerated. * config/tc-nds32.c (nds32_dx_regs): Set the value according to the configuration. (nds32_perf_ext, nds32_perf_ext2, nds32_string_ext, nds32_audio_ext): Likewise. (nds32_dsp_ext): New variable. Set the value according to the configuration. (nds32_zol_ext): Likewise. (asm_desc, nds32_pseudo_opcode_table): Make them static. (nds32_set_elf_flags_by_insn): Updated. (nds32_check_insn_available): Updated. (nds32_str_tolower): New function. * config/tc-nds32.c (relax_table): Updated. (md_begin): Updated. (md_assemble): Use XNEW macro to allocate space for `insn.info', and then remember to free it. (md_section_align): Cast (-1) to ValueT. (nds32_get_align): Cast (~0U) to addressT. (nds32_relax_branch_instructions): Updated. (md_convert_frag): Add new local variable `final_r_type'. (invalid_prev_frag): Add new bfd_boolean parameter `relax'. All callers changed. * config/tc-nds32.c (struct nds32_relocs_pattern): Add `insn' field. (struct nds32_hint_map): Add `option_list' field. (struct suffix_name, suffix_table): Remove the unused `pic' field. (do_pseudo_b, do_pseudo_bal): Remove the suffix checking. (do_pseudo_la_internal, do_pseudo_pushpopm): Indent. (relax_hint_bias, relax_hint_id_current): New static variables. (reset_bias, relax_hint_begin): New variables. (nds_itoa): New function. (CLEAN_REG, GET_OPCODE): New macros. (struct relax_hint_id): New. (nds32_relax_hint): For .relax_hint directive, we can use `begin' and `end' to mark the relax pattern without giving exactly id number. (nds32_elf_append_relax_relocs): Handle the case that the .relax_hint directives are attached to pseudo instruction. (nds32_elf_save_pseudo_pattern): Change the second parameter from instruction's opcode to byte code. (nds32_elf_build_relax_relation): Add new bfd_boolean parameter `pseudo_hint'. (nds32_lookup_pseudo_opcode): Fix the overflow issue. (enum nds32_insn_type): Add N32_RELAX_ALU1 and N32_RELAX_16BIT. (nds32_elf_record_fixup_exp, relax_ls_table, hint_map, nds32_find_reloc_table, nds32_match_hint_insn, nds32_parse_name): Updated. * config/tc-nds32.h (MAX_RELAX_NUM): Extend it to 6. (enum nds32_relax_hint_type): Merge NDS32_RELAX_HINT_LA and NDS32_RELAX_HINT_LS into NDS32_RELAX_HINT_LALS. Add NDS32_RELAX_HINT_LA_PLT, NDS32_RELAX_HINT_LA_GOT and NDS32_RELAX_HINT_LA_GOTOFF. * config/tc-nds32.h (relax_ls_table): Add floating load/store to gp relax pattern. (hint_map, nds32_find_reloc_table): Likewise. * configure.ac: Define NDS32_LINUX_TOOLCHAIN. * configure: Regenerated. * config.in: Regenerated. * config/tc-nds32.h (enum nds32_ramp): Updated. (enum nds32_relax_hint_type): Likewise. * config/tc-nds32.c: Include "errno.h" and "limits.h". (relax_ls_table): Add TLS relax patterns. (nds32_elf_append_relax_relocs): Attach BFD_RELOC_NDS32_GROUP on each instructions of TLS patterns. (nds32_elf_record_fixup_exp): Updated. (nds32_apply_fix): Likewise. (suffix_table): Add TLSDESC suffix. binutils* testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number from 215 to 255 for NDS32. bfd * elf32-nds32.c (nds32_elf_relax_loadstore): Remove the unused target features. (bfd_elf32_nds32_set_target_option): Remove the unused parameters. (nds32_elf_relax_piclo12, nds32_elf_relax_letlslo12, nds32_elf_relax_letlsadd, nds32_elf_relax_letlsls, nds32_elf_relax_pltgot_suff, nds32_elf_relax_got_suff nds32_elf_relax_gotoff_suff, calculate_plt_memory_address, calculate_plt_offset, calculate_got_memory_address, nds32_elf_check_dup_relocs): Removed. All callers changed. * elf32-nds32.h: Remove the unused macros and defines. (elf_nds32_link_hash_table): Remove the unused variable. (bfd_elf32_nds32_set_target_option): Update prototype. (nds32_elf_ex9_init): Removed. * elf32-nds32.c (nds32_convert_32_to_16): Updated. * elf32-nds32.c (HOWTO2, HOWTO3): Define new HOWTO macros to initialize array nds32_elf_howto_table in any order without lots of EMPTY_HOWTO. (nds32_reloc_map): Updated. * reloc.c: Add BFD_RELOC_NDS32_LSI. * bfd-in2.h: Regenerated. * bfd/libbfd.h: Regenerated. * elf32-nds32.c (nds32_elf_relax_howto_table): Add R_NDS32_LSI. (nds32_reloc_map): Likewise. (nds32_elf_relax_flsi): New function. (nds32_elf_relax_section): Support floating load/store relaxation. * elf32-nds32.c (NDS32_GUARD_SEC_P, elf32_nds32_local_gp_offset): New macro. (struct elf_nds32_link_hash_entry): New `offset_to_gp' field. (struct elf_nds32_obj_tdata): New `offset_to_gp' and `hdr_size' fields. (elf32_nds32_allocate_local_sym_info, nds32_elf_relax_guard, nds32_elf_is_target_special_symbol, nds32_elf_maybe_function_sym): New functions. (nds32_info_to_howto_rel): Add BFD_ASSERT. (bfd_elf32_bfd_reloc_type_table_lookup, nds32_elf_link_hash_newfunc, nds32_elf_link_hash_table_create, nds32_elf_relocate_section, nds32_elf_relax_loadstore, nds32_elf_relax_lo12, nds32_relax_adjust_label, bfd_elf32_nds32_set_target_option, nds32_fag_mark_relax): Updated. (nds32_elf_final_sda_base): Improve it to find the better gp value. (insert_nds32_elf_blank): Must consider `len' when inserting blanks. * elf32-nds32.h (bfd_elf32_nds32_set_target_option): Update prototype. (struct elf_nds32_link_hash_table): Add new variable `hyper_relax'. * elf32-nds32.c (elf32_nds32_allocate_dynrelocs): New function. (create_got_section): Likewise. (allocate_dynrelocs, nds32_elf_size_dynamic_sections, nds32_elf_relocate_section, nds32_elf_finish_dynamic_symbol): Updated. (nds32_elf_check_relocs): Fix the issue that the shared library may has TEXTREL entry in the dynamic section. (nds32_elf_create_dynamic_sections): Enable to call readonly_dynrelocs since the TEXTREL issue is fixed in the nds32_elf_check_relocs. (nds32_elf_finish_dynamic_sections): Update and add DT_RELASZ dynamic entry. (calculate_offset): Remove the unused parameter `pic_ext_target' and related codes. All callers changed. (elf_backend_dtrel_excludes_plt): Disable it temporarily since it will cause some errors for our test cases. * elf32-nds32.c (nds32_elf_merge_private_bfd_data): Allow to link the generic object. * reloc.c: Add TLS relocations. * libbfd.h: Regenerated. * bfd-in2.h: Regenerated. * elf32-nds32.h (struct section_id_list_t): New. (elf32_nds32_lookup_section_id, elf32_nds32_check_relax_group, elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New prototypes. (elf32_nds32_compute_jump_table_size, elf32_nds32_local_tlsdesc_gotent): New macro. (nds32_insertion_sort, bfd_elf32_nds32_set_target_option, elf_nds32_link_hash_table): Updated. * elf32-nds32.c (enum elf_nds32_tls_type): New. (struct elf32_nds32_relax_group_t, struct relax_group_list_t): New. (elf32_nds32_add_dynreloc, patch_tls_desc_to_ie, get_tls_type, fls, ones32, list_insert, list_insert_sibling, dump_chain, elf32_nds32_check_relax_group, elf32_nds32_lookup_section_id, elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New functions. (elf_nds32_obj_tdata): Add new fields. (elf32_nds32_relax_group_ptr, nds32_elf_local_tlsdesc_gotent): New macros. (nds32_elf_howto_table): Add TLS relocations. (nds32_reloc_map): Likewise. (nds32_elf_copy_indirect_symbol, nds32_elf_size_dynamic_sections, nds32_elf_finish_dynamic_symbol, elf32_nds32_allocate_local_sym_info, nds32_elf_relocate_section, bfd_elf32_nds32_set_target_option, nds32_elf_check_relocs, allocate_dynrelocs): Updated. (nds32_elf_relax_section): Call nds32_elf_unify_tls_model. (dtpoff_base): Rename it to `gottpof' and then update it. opcodes * nds32-asm.c (operand_fields): Remove the unused fields. (nds32_opcodes): Remove the unused instructions. * nds32-dis.c (nds32_ex9_info): Removed. (nds32_parse_opcode): Updated. (print_insn_nds32): Likewise. * nds32-asm.c (config.h, stdlib.h, string.h): New includes. (LEX_SET_FIELD, LEX_GET_FIELD): Update defines. (nds32_asm_init, build_operand_hash_table, build_keyword_hash_table, build_opcode_hash_table): New functions. (nds32_keyword_table, nds32_keyword_count_table, nds32_field_table, nds32_opcode_table): New. (hw_ktabs): Declare it to a pointer rather than an array. (build_hash_table): Removed. * nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT, SYN_ROPT and upadte HW_GPR and HW_INT. * nds32-dis.c (keywords): Remove const. (match_field): New function. (nds32_parse_opcode): Updated. * disassemble.c (disassemble_init_for_target): Add disassemble_init_nds32. * nds32-dis.c (eum map_type): New. (nds32_private_data): Likewise. (get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid, nds32_add_opcode_hash_table, disassemble_init_nds32): New functions. (print_insn_nds32): Updated. * nds32-asm.c (parse_aext_reg): Add new parameter. (parse_re, parse_re2, parse_aext_reg): Only reduced registers are allowed to use. All callers changed. * nds32-asm.c (keyword_usr, keyword_sr): Updated. (operand_fields): Add new fields. (nds32_opcodes): Add new instructions. (keyword_aridxi_mx): New keyword. * nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX and NASM_ATTR_ZOL. (ALU2_1, ALU2_2, ALU2_3): New macros. * nds32-dis.c (nds32_filter_unknown_insn): Updated.	2018-09-20 13:32:58 +01:00
Alan Modra	a4cd947aca	PR23425, unresolved symbol diagnostic ... dwarf2.c code reasonably assumes that debug info is local to a file, an assumption now violated by gcc, resulting in "DWARF error: invalid abstract instance DIE ref" or wrong details when attempting to print linker error messages with file, function and line reported. This is because find_abstract_instance is only prepared to handle DW_FORM_ref_addr when the .debug_info section referenced is in the current file. When that isn't the case, relocations to access another file's .debug_info will typically be against a symbol defined at the start of that .debug_info section, plus an addend. Since the dwarf2.c code only considers the current file's debug info, that symbol will be undefined, resolving to zero. In effect the ref_addr will wrongly resolve to the current file's .debug_info. This patch avoids the problem by treating relocations in debug sections against undefined symbols in a similar manner to the way relocations against symbols defined in discarded sections are resolved. They result in a zero value (except in .debug_ranges) regardless of the addend. PR 23425 * reloc.c (bfd_generic_get_relocated_section_contents): Zero reloc fields in debug sections when reloc is against an undefined symbol and called from bfd_simple_get_relocated_section_contents or similar. * dwarf2.c (find_abstract_instance): Return true for zero offset DW_FORM_ref_addr without returning values.	2018-09-14 21:21:28 +09:30
Alan Modra	4a9699735b	PowerPC64 higher REL16 relocations ... There are occasions where someone might want to build a 64-bit pc-relative offset from 16-bit pieces. This adds the necessary REL16 relocs corresponding to existing ADDR16 relocs that can be used to build 64-bit absolute values. include/ * elf/ppc64.h (R_PPC64_REL16_HIGH, R_PPC64_REL16_HIGHA), (R_PPC64_REL16_HIGHER, R_PPC64_REL16_HIGHERA), (R_PPC64_REL16_HIGHEST, R_PPC64_REL16_HIGHESTA): Define. (R_PPC64_LO_DS_OPT, R_PPC64_16DX_HA): Bump value. bfd/ * reloc.c (BFD_RELOC_PPC64_REL16_HIGH, BFD_RELOC_PPC64_REL16_HIGHA), (BFD_RELOC_PPC64_REL16_HIGHER, BFD_RELOC_PPC64_REL16_HIGHERA), (BFD_RELOC_PPC64_REL16_HIGHEST, BFD_RELOC_PPC64_REL16_HIGHESTA): Define. * elf64-ppc.c (ppc64_elf_howto_raw): Add new REL16 howtos. (ppc64_elf_reloc_type_lookup): Translate new REL16 relocs. (ppc64_elf_check_relocs, ppc64_elf_relocate_section): Handle them. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): Allow ADDR16 HIGH, HIGHA, HIGHER, HIGHERA, HIGHEST, and HIGHESTA relocs. Group 16-bit relocs. * config/tc-ppc.c (md_apply_fix): Translate those ADDR16 relocs to REL16 when pcrel. Sort relocs.	2018-08-31 22:15:05 +09:30
Alan Modra	706704c883	Pack reloc_howto_struct ... This patch uses bitfields in reloc_howto_struct, reducing its size from 80 to 40 bytes on 64-bit hosts and from 52 to 32 bytes on 32-bit hosts (with a 32-bit bfd_vma). I've also added a new "negate" field rather than making the encoded "size" field do double duty as both a size and a flag. There was just one use of an encoded size of 8, which according to bfd_get_reloc_size meant 16 bytes, in vms-alpha.c ALPHA_R_LINKAGE. See git commit c3d8e071bf adding ALPHA_R_LINKAGE and git commit 8612a388f7 decoding size 8 in bfd_get_reloc_size. Since no other part of BFD handles 16 byte relocs, I've removed that encoding and special cased the ALPHA_R_LINKAGE size in vms-alpha.c. * reloc.c (reloc_howto_type): Typedef. (bfd_symbol): Delete forward declaration. (struct reloc_howto_struct): Add "negate" field. Make "size", "bitsize", "rightshift", "bitpos", "complain_on_overflow", "pc_relative", "partial_inplace", and "pcrel_offset" bitfields. Rearrange for better packing. Revise comments. (HOWTO): Map to rearranged reloc_howto_struct. (bfd_get_reloc_size): Delete now unused cases. (read_reloc, write_reloc): Likewise. (apply_reloc, _bfd_relocate_contents): Test howto->negate rather than howto->size < 0 for negated relocation values. * coff-rs6000.c (xcoff_complain_overflow_bitfield_func): Avoid signed/unsigned warning. (xcoff_ppc_relocate_section): Delete "condition is always false" code. * coff64-rs6000.c (xcoff64_ppc_relocate_section): Likewise. * cpu-ns32k.c (do_ns32k_reloc): Adjust to suit reloc_howto_struct changes. * vms-alpha.c (_bfd_vms_write_etir, alpha_vms_slurp_relocs): Use size 16 for ALPHA_R_LINKAGE. (alpha_howto_table <ALPHA_R_LINKAGE>): Set encoded size and bitsize to zero. * bfd-in.h (reloc_howto_type): Delete. * bfd-in2.h: Regenerate.	2018-08-21 14:59:53 +09:30
Alan Modra	487096bf0b	Delete NEWHOWTO and tidy some uses of reloc_howto_struct ... NEWHOWTO was promised way back in 1991 (git commit e568362218). I doubt it's ever going to be implemented. This patch removes it, and tidies some reloc howtos. I was going to make some changes to reloc_howto_struct, so I think it's important that all relocs howtos are initialized with HOWTO. * reloc.c (HOWTO): Revise comment. (NEWHOWTO, HOWTO_PREPARE): Delete. * coff-arm.c (coff_arm_reloc_type_lookup): Replace const struc reloc_howto_struct with reloc_howto_type. * ns32knetbsd.c (MY_bfd_reloc_type_lookup): Likewise. * vms-alpha.c (alpha_vms_bfd_reloc_type_lookup): Likewise. * elf-hppa.h (HOW): Define. (elf_hppa_howto_table): Use it to simplify this table, correcting name of R_PARISC_LTOFF16WF, R_PARISC_LTOFF_FPTR64, and R_PARISC_LTOFF_FPTR16DF. * elf32-mep.c (MEPREL): Use HOWTO. * bfd-in2.h: Regenerate.	2018-08-21 14:59:53 +09:30
Alan Modra	1dc9e2d63e	Factor out common relocation processing ... This patch factors out some code common to both bfd_perform_relocation and bfd_install_relocation, in the process fixing the omission of "case -1" in bfd_install_relocation. * reloc.c (bfd_get_reloc_size): Sort switch. (read_reloc, write_reloc, apply_reloc): New functions. (bfd_perform_relocation, bfd_install_relocation): Use apply_reloc. (_bfd_relocate_contents): Use read_reloc and write_reloc. (_bfd_clear_contents): Likewise.	2018-08-11 13:39:16 +09:30
John Darrington	7cf9ebc695	Deal with relocations which are 3 bytes in size ... * reloc.c (_bfd_relocate_contents): Handle 3 byte relocs. (_bfd_clear_contents): Likewise. (bfd_perform_relocation): Likewise. (bfd_install_relocation): Likewise.	2018-08-11 11:11:39 +09:30
Alan Modra	05d0e962f0	R_PPC64_REL24_NOTOC support ... R_PPC64_REL24_NOTOC is used on calls like "bl foo@notoc" to tell the linker that linkage stubs for PLT calls or long branches can't use r2 for pic addressing. Instead, new stubs that generate pc-relative addresses are used. One complication is that pc-relative offsets to the PLT may need to be 64-bit in large programs, in contrast to the toc-relative addressing used by older PLT linkage stubs where a 32-bit offset is sufficient until the PLT itself exceeds 2G in size. .eh_frame info to cover the _notoc stubs is yet to be implemented. bfd/ * elf64-ppc.c (ADDI_R12_R11, ADDI_R12_R12, LIS_R12), (ADDIS_R12_R11, ORIS_R12_R12_0, ORI_R12_R12_0), (SLDI_R12_R12_32, LDX_R12_R11_R12, ADD_R12_R11_R12): Define. (ppc64_elf_howto_raw): Add R_PPC64_REL24_NOTOC entry. (ppc64_elf_reloc_type_lookup): Support R_PPC64_REL24_NOTOC. (ppc_stub_type): Add ppc_stub_long_branch_notoc, ppc_stub_long_branch_both, ppc_stub_plt_branch_notoc, ppc_stub_plt_branch_both, ppc_stub_plt_call_notoc, and ppc_stub_plt_call_both. (is_branch_reloc): Add R_PPC64_REL24_NOTOC. (build_offset, size_offset): New functions. (plt_stub_size): Support plt_call_notoc and plt_call_both. (ppc_build_one_stub, ppc_size_one_stub): Support new stubs. (toc_adjusting_stub_needed): Handle R_PPC64_REL24_NOTOC. (ppc64_elf_size_stubs): Likewise, and new stubs. (ppc64_elf_build_stubs, ppc64_elf_relocate_section): Likewise. * reloc.c: Add BFD_RELOC_PPC64_REL24_NOTOC. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.c (ppc_elf_suffix): Support @notoc. (ppc_force_relocation, ppc_fix_adjustable): Handle REL24_NOTOC. ld/ * testsuite/ld-powerpc/ext.d, * testsuite/ld-powerpc/ext.s, * testsuite/ld-powerpc/ext.lnk, * testsuite/ld-powerpc/notoc.d, * testsuite/ld-powerpc/notoc.s: New tests. * testsuite/ld-powerpc/powerpc.exp: Run them.	2018-08-05 12:11:51 +09:30
Andrew Jenner	b8891f8d62	Add support for the C_SKY series of processors. ... This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc. This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about. bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY. (BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise. * Makefile.in: Regenerated. * archures.c (enum bfd_architecture): Add bfd_arch_csky and related bfd_mach defines. (bfd_csky_arch): Declare. (bfd_archures_list): Add C-SKY. * bfd-in.h (elf32_csky_build_stubs): Declare. (elf32_csky_size_stubs): Declare. (elf32_csky_next_input_section: Declare. (elf32_csky_setup_section_lists): Declare. * bfd-in2.h: Regenerated. * config.bfd: Add C-SKY. * configure.ac: Likewise. * configure: Regenerated. * cpu-csky.c: New file. * elf-bfd.h (enum elf_target_id): Add C-SKY. * elf32-csky.c: New file. * libbfd.h: Regenerated. * reloc.c: Add C-SKY relocations. * targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare. (_bfd_target_vector): Add C-SKY target vector entries. binutils* readelf.c: Include elf/csky.h. (guess_is_rela): Handle EM_CSKY. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. include * dis-asm.h (csky_symbol_is_valid): Declare. * opcode/csky.h: New file. opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c. * Makefile.in: Regenerated. * configure.ac: Add C-SKY. * configure: Regenerated. * csky-dis.c: New file. * csky-opc.h: New file. * disassemble.c (ARCH_csky): Define. (disassembler, disassemble_init_for_target): Add case for ARCH_csky. * disassemble.h (print_insn_csky, csky_get_disassembler): Declare. gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY. (TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise. * Makefile.in: Regenerated. * config/tc-csky.c: New file. * config/tc-csky.h: New file. * config/te-csky_abiv1.h: New file. * config/te-csky_abiv1_linux.h: New file. * config/te-csky_abiv2.h: New file. * config/te-csky_abiv2_linux.h: New file. * configure.tgt: Add C-SKY. * doc/Makefile.am (CPU_DOCS): Add entry for C-SKY. * doc/Makefile.in: Regenerated. * doc/all.texi: Set CSKY feature. * doc/as.texi (Overview): Add C-SKY options. (Machine Dependencies): Likewise. * doc/c-csky.texi: New file. * testsuite/gas/csky/*: New test cases. ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations. (ecskyelf.c, ecskyelf_linux.c): New rules. * Makefile.in: Regenerated. * configure.tgt: Add C-SKY. * emulparams/cskyelf.sh: New file. * emulparams/cskyelf_linux.sh: New file. * emultempl/cskyelf.em: New file. * gen-doc.texi: Add C-SKY. * ld.texi: Likewise. (Options specific to C-SKY targets): New section. * testsuite/ld-csky/*: New tests.	2018-07-30 12:24:14 +01:00
Mephi	ed1299fe46	Add support for the TLV relocation generated by LLVM for x86_64 MACH-O targets. ... PR 23297 * mach-o-x86-64.c (x86_64_howto_table): Add entry for BFD_RELOC_MACH_O_X86_64_RELOC_TLV. (bfd_mach_o_x86_64_canonicalize_one_reloc): Handle the new reloc. (bfd_mach_o_x86_64_swap_reloc_out): Likewise. * reloc.c (BFD_RELOC_MACH_O_X86_64_TV): New entry. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate.	2018-06-18 12:56:44 +01:00
John Darrington	7b4ae82428	Add support for the Freescale s12z processor. ... bfd * Makefile.am: Add s12z files. * Makefile.in: Regenerate. * archures.c: Add bfd_s12z_arch. * bfd-in.h: Add exports of bfd_putb24 and bfd_putl24. * bfd-in2.h: Regenerate. * config.bfd: Add s12z target. * configure.ac: Add s12z target. * configure: Regenerate. * cpu-s12z.c: New file. * elf32-s12z.c: New file. * libbfd.c (bfd_putb24): New function. (bfd_putl24): New function. * libbfd.h: Regenerate. * reloc.c: Add s12z relocations. (bfd_get_reloc_size): Handle size 5 relocs. * targets.c: Add s12z_elf32_vec. opcodes * Makefile.am: Add support for s12z architecture. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * s12z-dis.c: New file. * s12z.h: New file. include * elf/s12z.h: New header. ld * Makefile.am: Add support for s12z architecture. * configure.tgt: Likewise. * Makefile.in: Regenerate. * emulparams/m9s12zelf.sh: New file. * scripttempl/elfm9s12z.sc: New file. * testsuite/ld-discard/static.d: Expect to fail for the s12z target. * testsuite/ld-elf/endsym.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr14926.d: Skip for the s12z target. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-s12z: New directory. * testsuite/ld-s12z/opr-linking.d: New file. * testsuite/ld-s12z/opr-linking.s: New file. * testsuite/ld-s12z/relative-linking.d: New file. * testsuite/ld-s12z/relative-linking.s: New file. * testsuite/ld-s12z/z12s.exp: New file. gas * Makefile.am: Add support for s12z target. * Makefile.in: Regenerate. * NEWS: Mention the new support. * config/tc-s12z.c: New file. * config/tc-s12z.h: New file. * configure.tgt: Add s12z support. * doc/Makefile.am: Likewise. * doc/Makefile.in: Regenerate. * doc/all.texi: Add s12z documentation. * doc/as.textinfo: Likewise. * doc/c-s12z.texi: New file. * testsuite/gas/s12z: New directory. * testsuite/gas/s12z/abs.d: New file. * testsuite/gas/s12z/abs.s: New file. * testsuite/gas/s12z/adc-imm.d: New file. * testsuite/gas/s12z/adc-imm.s: New file. * testsuite/gas/s12z/adc-opr.d: New file. * testsuite/gas/s12z/adc-opr.s: New file. * testsuite/gas/s12z/add-imm.d: New file. * testsuite/gas/s12z/add-imm.s: New file. * testsuite/gas/s12z/add-opr.d: New file. * testsuite/gas/s12z/add-opr.s: New file. * testsuite/gas/s12z/and-imm.d: New file. * testsuite/gas/s12z/and-imm.s: New file. * testsuite/gas/s12z/and-opr.d: New file. * testsuite/gas/s12z/and-opr.s: New file. * testsuite/gas/s12z/and-or-cc.d: New file. * testsuite/gas/s12z/and-or-cc.s: New file. * testsuite/gas/s12z/bfext-special.d: New file. * testsuite/gas/s12z/bfext-special.s: New file. * testsuite/gas/s12z/bfext.d: New file. * testsuite/gas/s12z/bfext.s: New file. * testsuite/gas/s12z/bit-manip.d: New file. * testsuite/gas/s12z/bit-manip.s: New file. * testsuite/gas/s12z/bit.d: New file. * testsuite/gas/s12z/bit.s: New file. * testsuite/gas/s12z/bra-expression-defined.d: New file. * testsuite/gas/s12z/bra-expression-defined.s: New file. * testsuite/gas/s12z/bra-expression-undef.d: New file. * testsuite/gas/s12z/bra-expression-undef.s: New file. * testsuite/gas/s12z/bra.d: New file. * testsuite/gas/s12z/bra.s: New file. * testsuite/gas/s12z/brclr-symbols.d: New file. * testsuite/gas/s12z/brclr-symbols.s: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file. * testsuite/gas/s12z/clb.d: New file. * testsuite/gas/s12z/clb.s: New file. * testsuite/gas/s12z/clr-opr.d: New file. * testsuite/gas/s12z/clr-opr.s: New file. * testsuite/gas/s12z/clr.d: New file. * testsuite/gas/s12z/clr.s: New file. * testsuite/gas/s12z/cmp-imm.d: New file. * testsuite/gas/s12z/cmp-imm.s: New file. * testsuite/gas/s12z/cmp-opr-inc.d: New file. * testsuite/gas/s12z/cmp-opr-inc.s: New file. * testsuite/gas/s12z/cmp-opr-rdirect.d: New file. * testsuite/gas/s12z/cmp-opr-rdirect.s: New file. * testsuite/gas/s12z/cmp-opr-reg.d: New file. * testsuite/gas/s12z/cmp-opr-reg.s: New file. * testsuite/gas/s12z/cmp-opr-rindirect.d: New file. * testsuite/gas/s12z/cmp-opr-rindirect.s: New file. * testsuite/gas/s12z/cmp-opr-sxe4.d: New file. * testsuite/gas/s12z/cmp-opr-sxe4.s: New file. * testsuite/gas/s12z/cmp-opr-xys.d: New file. * testsuite/gas/s12z/cmp-opr-xys.s: New file. * testsuite/gas/s12z/cmp-s-imm.d: New file. * testsuite/gas/s12z/cmp-s-imm.s: New file. * testsuite/gas/s12z/cmp-s-opr.d: New file. * testsuite/gas/s12z/cmp-s-opr.s: New file. * testsuite/gas/s12z/cmp-xy.d: New file. * testsuite/gas/s12z/cmp-xy.s: New file. * testsuite/gas/s12z/com-opr.d: New file. * testsuite/gas/s12z/com-opr.s: New file. * testsuite/gas/s12z/complex-shifts.d: New file. * testsuite/gas/s12z/complex-shifts.s: New file. * testsuite/gas/s12z/db-tb-cc-opr.d: New file. * testsuite/gas/s12z/db-tb-cc-opr.s: New file. * testsuite/gas/s12z/db-tb-cc-reg.d: New file. * testsuite/gas/s12z/db-tb-cc-reg.s: New file. * testsuite/gas/s12z/dbCC.d: New file. * testsuite/gas/s12z/dbCC.s: New file. * testsuite/gas/s12z/dec-opr.d: New file. * testsuite/gas/s12z/dec-opr.s: New file. * testsuite/gas/s12z/dec.d: New file. * testsuite/gas/s12z/dec.s: New file. * testsuite/gas/s12z/div.d: New file. * testsuite/gas/s12z/div.s: New file. * testsuite/gas/s12z/eor.d: New file. * testsuite/gas/s12z/eor.s: New file. * testsuite/gas/s12z/exg.d: New file. * testsuite/gas/s12z/exg.s: New file. * testsuite/gas/s12z/ext24-ld-xy.d: New file. * testsuite/gas/s12z/ext24-ld-xy.s: New file. * testsuite/gas/s12z/inc-opr.d: New file. * testsuite/gas/s12z/inc-opr.s: New file. * testsuite/gas/s12z/inc.d: New file. * testsuite/gas/s12z/inc.s: New file. * testsuite/gas/s12z/inh.d: New file. * testsuite/gas/s12z/inh.s: New file. * testsuite/gas/s12z/jmp.d: New file. * testsuite/gas/s12z/jmp.s: New file. * testsuite/gas/s12z/jsr.d: New file. * testsuite/gas/s12z/jsr.s: New file. * testsuite/gas/s12z/ld-imm-page2.d: New file. * testsuite/gas/s12z/ld-imm-page2.s: New file. * testsuite/gas/s12z/ld-imm.d: New file. * testsuite/gas/s12z/ld-imm.s: New file. * testsuite/gas/s12z/ld-immu18.d: New file. * testsuite/gas/s12z/ld-immu18.s: New file. * testsuite/gas/s12z/ld-large-direct.d: New file. * testsuite/gas/s12z/ld-large-direct.s: New file. * testsuite/gas/s12z/ld-opr.d: New file. * testsuite/gas/s12z/ld-opr.s: New file. * testsuite/gas/s12z/ld-s-opr.d: New file. * testsuite/gas/s12z/ld-s-opr.s: New file. * testsuite/gas/s12z/ld-small-direct.d: New file. * testsuite/gas/s12z/ld-small-direct.s: New file. * testsuite/gas/s12z/lea-immu18.d: New file. * testsuite/gas/s12z/lea-immu18.s: New file. * testsuite/gas/s12z/lea.d: New file. * testsuite/gas/s12z/lea.s: New file. * testsuite/gas/s12z/mac.d: New file. * testsuite/gas/s12z/mac.s: New file. * testsuite/gas/s12z/min-max.d: New file. * testsuite/gas/s12z/min-max.s: New file. * testsuite/gas/s12z/mod.d: New file. * testsuite/gas/s12z/mod.s: New file. * testsuite/gas/s12z/mov.d: New file. * testsuite/gas/s12z/mov.s: New file. * testsuite/gas/s12z/mul-imm.d: New file. * testsuite/gas/s12z/mul-imm.s: New file. * testsuite/gas/s12z/mul-opr-opr.d: New file. * testsuite/gas/s12z/mul-opr-opr.s: New file. * testsuite/gas/s12z/mul-opr.d: New file. * testsuite/gas/s12z/mul-opr.s: New file. * testsuite/gas/s12z/mul-reg.d: New file. * testsuite/gas/s12z/mul-reg.s: New file. * testsuite/gas/s12z/mul.d: New file. * testsuite/gas/s12z/mul.s: New file. * testsuite/gas/s12z/neg-opr.d: New file. * testsuite/gas/s12z/neg-opr.s: New file. * testsuite/gas/s12z/not-so-simple-shifts.d: New file. * testsuite/gas/s12z/not-so-simple-shifts.s: New file. * testsuite/gas/s12z/opr-18u.d: New file. * testsuite/gas/s12z/opr-18u.s: New file. * testsuite/gas/s12z/opr-expr.d: New file. * testsuite/gas/s12z/opr-expr.s: New file. * testsuite/gas/s12z/opr-ext-18.d: New file. * testsuite/gas/s12z/opr-ext-18.s: New file. * testsuite/gas/s12z/opr-idx-24-reg.d: New file. * testsuite/gas/s12z/opr-idx-24-reg.s: New file. * testsuite/gas/s12z/opr-idx3-reg.d: New file. * testsuite/gas/s12z/opr-idx3-reg.s: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.d: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.s: New file. * testsuite/gas/s12z/opr-indirect-expr.d: New file. * testsuite/gas/s12z/opr-indirect-expr.s: New file. * testsuite/gas/s12z/opr-symbol.d: New file. * testsuite/gas/s12z/opr-symbol.s: New file. * testsuite/gas/s12z/or-imm.d: New file. * testsuite/gas/s12z/or-imm.s: New file. * testsuite/gas/s12z/or-opr.d: New file. * testsuite/gas/s12z/or-opr.s: New file. * testsuite/gas/s12z/p2-mul.d: New file. * testsuite/gas/s12z/p2-mul.s: New file. * testsuite/gas/s12z/page2-inh.d: New file. * testsuite/gas/s12z/page2-inh.s: New file. * testsuite/gas/s12z/psh-pul.d: New file. * testsuite/gas/s12z/psh-pul.s: New file. * testsuite/gas/s12z/qmul.d: New file. * testsuite/gas/s12z/qmul.s: New file. * testsuite/gas/s12z/rotate.d: New file. * testsuite/gas/s12z/rotate.s: New file. * testsuite/gas/s12z/s12z.exp: New file. * testsuite/gas/s12z/sat.d: New file. * testsuite/gas/s12z/sat.s: New file. * testsuite/gas/s12z/sbc-imm.d: New file. * testsuite/gas/s12z/sbc-imm.s: New file. * testsuite/gas/s12z/sbc-opr.d: New file. * testsuite/gas/s12z/sbc-opr.s: New file. * testsuite/gas/s12z/shift.d: New file. * testsuite/gas/s12z/shift.s: New file. * testsuite/gas/s12z/simple-shift.d: New file. * testsuite/gas/s12z/simple-shift.s: New file. * testsuite/gas/s12z/single-ops.d: New file. * testsuite/gas/s12z/single-ops.s: New file. * testsuite/gas/s12z/specd6.d: New file. * testsuite/gas/s12z/specd6.s: New file. * testsuite/gas/s12z/st-large-direct.d: New file. * testsuite/gas/s12z/st-large-direct.s: New file. * testsuite/gas/s12z/st-opr.d: New file. * testsuite/gas/s12z/st-opr.s: New file. * testsuite/gas/s12z/st-s-opr.d: New file. * testsuite/gas/s12z/st-s-opr.s: New file. * testsuite/gas/s12z/st-small-direct.d: New file. * testsuite/gas/s12z/st-small-direct.s: New file. * testsuite/gas/s12z/st-xy.d: New file. * testsuite/gas/s12z/st-xy.s: New file. * testsuite/gas/s12z/sub-imm.d: New file. * testsuite/gas/s12z/sub-imm.s: New file. * testsuite/gas/s12z/sub-opr.d: New file. * testsuite/gas/s12z/sub-opr.s: New file. * testsuite/gas/s12z/tfr.d: New file. * testsuite/gas/s12z/tfr.s: New file. * testsuite/gas/s12z/trap.d: New file. * testsuite/gas/s12z/trap.s: New file. binutils* readelf.c: Add support for s12z architecture. * testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z targets.	2018-05-18 15:26:18 +01:00
Christophe Lyon	5c5a4843ec	[ARM] Add TLS relocations for FDPIC. ... Define and handle TLS relocations for FDPIC in BFD and gas. In gas, the new relocations are rejected if the --fdpic option was not specified. We also define the __tdata_start symbol to mark the start of the .tdata section. This allows FDPIC static binaries to find the start of .tdata section, since phdr->p_vaddr of TLS segment is not a valid value for FDPIC. 2018-04-25 Christophe Lyon <christophe.lyon@st.com> Mickaël Guêné <mickael.guene@st.com> bfd/: * bfd-in2.h (BFD_RELOC_ARM_TLS_GD32_FDPIC) (BFD_RELOC_ARM_TLS_LDM32_FDPIC, BFD_RELOC_ARM_TLS_IE32_FDPIC): New relocations. * elf32-arm.c (elf32_arm_howto_table_2): Add R_ARM_TLS_GD32_FDPIC, R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC relocations. (elf32_arm_reloc_map): Add R_ARM_TLS_GD32_FDPIC, R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC. (struct elf32_arm_link_hash_table): Update comment. (elf32_arm_final_link_relocate): Handle TLS FDPIC relocations. (IS_ARM_TLS_RELOC): Likewise. (elf32_arm_check_relocs): Likewise. (allocate_dynrelocs_for_symbol): Likewise. (elf32_arm_size_dynamic_sections): Update comment. * reloc.c: Add BFD_RELOC_ARM_TLS_GD32_FDPIC, BFD_RELOC_ARM_TLS_LDM32_FDPIC, BFD_RELOC_ARM_TLS_IE32_FDPIC. gas/ * config/tc-arm.c (reloc_names): Add TLSGD_FDPIC, TLSLDM_FDPIC, GOTTPOFF_FDIC relocations. (md_apply_fix): Handle the new TLS FDPIC relocations. (tc_gen_reloc): Likewise. (arm_fix_adjustable): Likewise. include/ * elf/arm.h: Add R_ARM_TLS_GD32_FDPIC, R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC. ld/ * scripttempl/elf.sc: Define __tdata_start for .tdata section.	2018-04-25 20:57:02 +00:00
Christophe Lyon	188fd7aea6	[ARM] Add FDPIC relocations definitions ... Add FDPIC relocation definitions in BFD and gas. Gas rejects them if the --fdpic option was not specified. 2018-04-25 Christophe Lyon <christophe.lyon@st.com> Mickaël Guêné <mickael.guene@st.com> bfd/ * bfd-in2.c (BFD_RELOC_ARM_GOTFUNCDESC) (BFD_RELOC_ARM_GOTOFFFUNCDESC, BFD_RELOC_ARM_FUNCDESC) (BFD_RELOC_ARM_FUNCDESC_VALUE): New. * elf32-arm.c (elf32_arm_howto_table_2): Add R_ARM_GOTFUNCDESC, R_ARM_GOTOFFFUNCDESC, R_ARM_FUNCDESC, R_ARM_FUNCDESC_VALUE. (elf32_arm_howto_from_type): Take new members of elf32_arm_howto_table_2 into account. (elf32_arm_reloc_map): Add BFD_RELOC_ARM_GOTFUNCDESC, BFD_RELOC_ARM_GOTOFFFUNCDESC, BFD_RELOC_ARM_FUNCDESC, BFD_RELOC_ARM_FUNCDESC_VALUE. * reloc.c: Add BFD_RELOC_ARM_GOTFUNCDESC, BFD_RELOC_ARM_GOTOFFFUNCDESC, BFD_RELOC_ARM_FUNCDESC, BFD_RELOC_ARM_FUNCDESC_VALUE. gas/ * config/tc-arm.c (reloc_names): Add gotfuncdesc, gotofffuncdesc, funcdesc. (md_apply_fix): Support the new relocations. (tc_gen_reloc): Likewise. * testsuite/gas/arm/reloc-fdpic.d: New. * testsuite/gas/arm/reloc-fdpic.s: New. include/ * elf/arm.h (R_ARM_GOTFUNCDESC, R_ARM_GOTOFFFUNCDESC) (R_ARM_FUNCDESC) (R_ARM_FUNCDESC_VALUE): Define new relocations.	2018-04-25 20:51:53 +00:00
Michael Eager	3f0a5f17d7	[MicroBlaze] PIC data text relative ... Andrew Sadek <andrew.sadek.se@gmail.com> A new implemented feature in GCC Microblaze that allows Position Independent Code to run using Data Text Relative addressing instead of using Global Offset Table. Its aim was to make 'PIC' more efficient and flexible as elf size excess performance overhead were noticed when using GOT due to the indirect addressing. include/ChangeLog: * bfdlink.h (Add flag): Add new flag @ 'bfd_link_info' struct. * elf/microblaze.h (Add 3 new relocations): R_MICROBLAZE_TEXTPCREL_64, R_MICROBLAZE_TEXTREL_64 and R_MICROBLAZE_TEXTREL_32_LO for relax function. bfd/ChangeLog: * bfd/reloc.c (2 new BFD relocations): BFD_RELOC_MICROBLAZE_64_TEXTPCREL & BFD_RELOC_MICROBLAZE_64_TEXTPCREL * bfd/bfd-in2.h: Regenerate * bfd/libbfd.h: Regenerate * bfd/elf32-microblaze.c (Handle new relocs): define 'HOWTO' of 3 new relocs and handle them in both relocate and relax functions. (microblaze_elf_reloc_type_lookup): add mapping between for new bfd relocs. (microblaze_elf_relocate_section): Handle new relocs in case of elf relocation. (microblaze_elf_relax_section): Handle new relocs for elf relaxation. gas/ChangeLog: * gas/config/tc-microblaze.c (Handle new relocs directives in assembler): Handle new relocs from compiler output. (imm_types): add new imm types for data text relative addressing TEXT_OFFSET, TEXT_PC_OFFSET (md_convert_frag): conversion for BFD_RELOC_MICROBLAZE_64_TEXTPCREL, BFD_RELOC_MICROBLAZE_64_TEXTPCREL (md_apply_fix): apply fix for BFD_RELOC_MICROBLAZE_64_TEXTPCREL, BFD_RELOC_MICROBLAZE_64_TEXTPCREL (md_estimate_size_before_relax): estimate size for BFD_RELOC_MICROBLAZE_64_TEXTPCREL, BFD_RELOC_MICROBLAZE_64_TEXTPCREL (tc_gen_reloc): generate relocations for BFD_RELOC_MICROBLAZE_64_TEXTPCREL, BFD_RELOC_MICROBLAZE_64_TEXTPCREL ld/ChangeLog: * ld/lexsup.c (Add 2 ld options): (ld_options): add disable-multiple-abs-defs @ 'ld_options' array (parse_args): parse new option and pass flag to 'link_info' struct. * ld/ldlex.h (Add enum): add new enum @ 'option_values' enum. * ld/ld.texinfo (Add new option): Add description for 'disable-multiple-abs-defs' * ld/main.c: Initialize flags with false @ 'main'. Handle disable-multiple-abs-defs @ 'mutiple_definition'.	2018-04-17 14:47:13 -07:00
Alan Modra	c2bf1eecf9	Remove m88k support ... include/ * coff/internal.h: Remove m88k support. * coff/m88k.h: Delete. * opcode/m88k.h: Delete. bfd/ * Makefile.am: Remove m88k support. * aoutx.h: Likewise. * archures.c: Likewise. * coffcode.h: Likewise. * coffswap.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-ns32k.c: Likewise. * elf32-nds32.c: Likewise. * mach-o.c: Likewise. * netbsd-core.c: Likewise. * reloc.c: Likewise. * targets.c: Likewise. * coff-m88k.c: Delete. * cpu-m88k.c: Delete. * elf32-m88k.c: Delete. * hosts/m88kmach3.h: Delete. * m88kmach3.c: Delete. * m88kopenbsd.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove m88k support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * m88k-dis.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * MAINTAINERS (Mark Kettenis): Move to past maintainers. * testsuite/binutils-all/objdump.exp: Remove m88k support. gas/ * configure.ac: Remove m88k support. * config.in: Regenerate. * configure: Regenerate. ld/ * Makefile.am: Remove m88k support. * configure.host: Likewise. * configure.tgt: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * emulparams/m88kbcs.sh: Delete. * scripttempl/m88kbcs.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.	2018-04-16 15:23:38 +09:30
Alan Modra	a8eb42a8b7	Remove i860, i960, bout and aout-adobe targets ... Plus remove a few leftovers from the 29k support. include/ * aout/adobe.h: Delete. * aout/reloc.h: Delete. * coff/i860.h: Delete. * coff/i960.h: Delete. * elf/i860.h: Delete. * elf/i960.h: Delete. * opcode/i860.h: Delete. * opcode/i960.h: Delete. * aout/aout64.h (enum reloc_type): Trim off 29k and other unused values. * aout/ar.h (ARMAGB): Remove. * coff/internal.h (struct internal_aouthdr, struct internal_scnhdr, union internal_auxent): Remove i960 support. bfd/ * aout-adobe.c: Delete. * bout.c: Delete. * coff-i860.c: Delete. * coff-i960.c: Delete. * cpu-i860.c: Delete. * cpu-i960.c: Delete. * elf32-i860.c: Delete. * elf32-i960.c: Delete. * hosts/i860mach3.h: Delete. * Makefile.am: Remove i860, i960, bout, and adobe support. * archures.c: Remove i860 and i960 support. * coffcode.h: Likewise. * reloc.c: Likewise. * aoutx.h: Comment updates. * archive.c: Remove BOUT and i960 support. * bfd.c: Remove BOUT support. * coffswap.h: Remove i960 support. * config.bfd: Remove i860, i960 and adobe targets. * configure.ac: Remove adode, bout, i860, i960, icoff targets. * targets.c: Likewise. * ieee.c: Remove i960 support. * mach-o.c: Remove i860 support. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * opcodes/i860-dis.c: Delete. * opcodes/i960-dis.c: Delete. * Makefile.am: Remove i860 and i960 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * ieee.c: Remove i960 support. * od-macho.c: Remove i860 support. * readelf.c: Remove i860 and i960 support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/binutils-all/objdump.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/aout_gnu.h: Delete. * config/tc-i860.c: Delete. * config/tc-i860.h: Delete. * config/tc-i960.c: Delete. * config/tc-i960.h: Delete. * doc/c-i860.texi: Delete. * doc/c-i960.texi: Delete. * testsuite/gas/i860/README.i860: Delete. * testsuite/gas/i860/bitwise.d: Delete. * testsuite/gas/i860/bitwise.s: Delete. * testsuite/gas/i860/branch.d: Delete. * testsuite/gas/i860/branch.s: Delete. * testsuite/gas/i860/bte.d: Delete. * testsuite/gas/i860/bte.s: Delete. * testsuite/gas/i860/dir-align01.d: Delete. * testsuite/gas/i860/dir-align01.s: Delete. * testsuite/gas/i860/dir-intel01.d: Delete. * testsuite/gas/i860/dir-intel01.s: Delete. * testsuite/gas/i860/dir-intel02.d: Delete. * testsuite/gas/i860/dir-intel02.s: Delete. * testsuite/gas/i860/dir-intel03-err.l: Delete. * testsuite/gas/i860/dir-intel03-err.s: Delete. * testsuite/gas/i860/dual01.d: Delete. * testsuite/gas/i860/dual01.s: Delete. * testsuite/gas/i860/dual02-err.l: Delete. * testsuite/gas/i860/dual02-err.s: Delete. * testsuite/gas/i860/dual03.d: Delete. * testsuite/gas/i860/dual03.s: Delete. * testsuite/gas/i860/fldst01.d: Delete. * testsuite/gas/i860/fldst01.s: Delete. * testsuite/gas/i860/fldst02.d: Delete. * testsuite/gas/i860/fldst02.s: Delete. * testsuite/gas/i860/fldst03.d: Delete. * testsuite/gas/i860/fldst03.s: Delete. * testsuite/gas/i860/fldst04.d: Delete. * testsuite/gas/i860/fldst04.s: Delete. * testsuite/gas/i860/fldst05.d: Delete. * testsuite/gas/i860/fldst05.s: Delete. * testsuite/gas/i860/fldst06.d: Delete. * testsuite/gas/i860/fldst06.s: Delete. * testsuite/gas/i860/fldst07.d: Delete. * testsuite/gas/i860/fldst07.s: Delete. * testsuite/gas/i860/fldst08.d: Delete. * testsuite/gas/i860/fldst08.s: Delete. * testsuite/gas/i860/float01.d: Delete. * testsuite/gas/i860/float01.s: Delete. * testsuite/gas/i860/float02.d: Delete. * testsuite/gas/i860/float02.s: Delete. * testsuite/gas/i860/float03.d: Delete. * testsuite/gas/i860/float03.s: Delete. * testsuite/gas/i860/float04.d: Delete. * testsuite/gas/i860/float04.s: Delete. * testsuite/gas/i860/form.d: Delete. * testsuite/gas/i860/form.s: Delete. * testsuite/gas/i860/i860.exp: Delete. * testsuite/gas/i860/iarith.d: Delete. * testsuite/gas/i860/iarith.s: Delete. * testsuite/gas/i860/ldst01.d: Delete. * testsuite/gas/i860/ldst01.s: Delete. * testsuite/gas/i860/ldst02.d: Delete. * testsuite/gas/i860/ldst02.s: Delete. * testsuite/gas/i860/ldst03.d: Delete. * testsuite/gas/i860/ldst03.s: Delete. * testsuite/gas/i860/ldst04.d: Delete. * testsuite/gas/i860/ldst04.s: Delete. * testsuite/gas/i860/ldst05.d: Delete. * testsuite/gas/i860/ldst05.s: Delete. * testsuite/gas/i860/ldst06.d: Delete. * testsuite/gas/i860/ldst06.s: Delete. * testsuite/gas/i860/pfam.d: Delete. * testsuite/gas/i860/pfam.s: Delete. * testsuite/gas/i860/pfmam.d: Delete. * testsuite/gas/i860/pfmam.s: Delete. * testsuite/gas/i860/pfmsm.d: Delete. * testsuite/gas/i860/pfmsm.s: Delete. * testsuite/gas/i860/pfsm.d: Delete. * testsuite/gas/i860/pfsm.s: Delete. * testsuite/gas/i860/pseudo-ops01.d: Delete. * testsuite/gas/i860/pseudo-ops01.s: Delete. * testsuite/gas/i860/regress01.d: Delete. * testsuite/gas/i860/regress01.s: Delete. * testsuite/gas/i860/shift.d: Delete. * testsuite/gas/i860/shift.s: Delete. * testsuite/gas/i860/simd.d: Delete. * testsuite/gas/i860/simd.s: Delete. * testsuite/gas/i860/system.d: Delete. * testsuite/gas/i860/system.s: Delete. * testsuite/gas/i860/xp.d: Delete. * testsuite/gas/i860/xp.s: Delete. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/all.texi: Likewise. * testsuite/gas/all/gas.exp * config/obj-coff.h: Remove i960 support. * doc/internals.texi: Likewise. * expr.c: Likewise. * read.c: Likewise. * write.c: Likewise. * write.h: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * testsuite/gas/symver/symver.exp: Likewise. * config/tc-m68k.c: Remove BOUT support. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * symbols.c: Likewise. * doc/h8.texi: Likewise. * configure.ac: Remove BOUT and i860 support. * doc/as.texinfo: Remove BOUT, i860 and i960 support * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * emulparams/coff_i860.sh: Delete. * emulparams/elf32_i860.sh: Delete. * emulparams/elf32_i960.sh: Delete. * emulparams/gld960.sh: Delete. * emulparams/gld960coff.sh: Delete. * emulparams/lnk960.sh: Delete. * emultempl/gld960.em: Delete. * emultempl/gld960c.em: Delete. * emultempl/lnk960.em: Delete. * scripttempl/i860coff.sc: Delete. * scripttempl/i960.sc: Delete. * ld.texinfo: Remove i960 support. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * testsuite/ld-discard/extern.d: Likewise. * testsuite/ld-discard/start.d: Likewise. * testsuite/ld-discard/static.d: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group1.d: Likewise. * testsuite/ld-elf/group3b.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/linkonce2.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/merge2.d: Likewise. * testsuite/ld-elf/merge3.d: Likewise. * testsuite/ld-elf/orphan-10.d: Likewise. * testsuite/ld-elf/orphan-11.d: Likewise. * testsuite/ld-elf/orphan-12.d: Likewise. * testsuite/ld-elf/orphan-9.d: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/orphan3.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17550a.d: Likewise. * testsuite/ld-elf/pr17550b.d: Likewise. * testsuite/ld-elf/pr17550c.d: Likewise. * testsuite/ld-elf/pr17550d.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr20528a.d: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/ld-elf/pr22836-1a.d: Likewise. * testsuite/ld-elf/pr22836-1b.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-elf/warn1.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elf/warn3.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.	2018-04-11 21:49:30 +09:30
Renlin Li	84f1b9fb08	[1/2][GAS][AARCH64]Add BFD_RELOC_AARCH64_TLSLE_LDST8/16/32/64_TPREL_LO12 support in GAS. ... This patch adds the following relocation support into binutils gas. BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12, BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC, BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12, BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC, BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12, BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC, BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12, BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC. Those relocations includes both ip64 and ilp32 variant.	2018-03-28 18:03:55 +01:00
Alan Modra	6e05870c97	BFD messages ... bfd/ * archive.c, * bfd.c, * linker.c, * reloc.c, * stabs.c, * syms.c: Standardize error/warning messages. binutils/ * testsuite/binutils-all/mips/mips-reginfo-n32.d, * testsuite/binutils-all/mips/mips-reginfo.d: Update. gas/ * testsuite/gas/mips/reginfo-2.l: Update. ld/ * testsuite/ld-arm/cmse-implib-errors.out, * testsuite/ld-arm/cmse-new-earlier-later-implib.out, * testsuite/ld-arm/cmse-new-implib-not-sg-in-implib.out, * testsuite/ld-arm/cmse-new-wrong-implib.out, * testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out, * testsuite/ld-arm/cmse-veneers-wrong-entryfct.out, * testsuite/ld-cris/badgotr1.d, * testsuite/ld-cris/tls-err-24.d, * testsuite/ld-cris/tls-err-25.d, * testsuite/ld-cris/tls-err-26.d, * testsuite/ld-cris/tls-err-27.d, * testsuite/ld-cris/tls-err-28.d, * testsuite/ld-cris/tls-err-40.d, * testsuite/ld-cris/tls-err-44.d, * testsuite/ld-cris/tls-err-48.d, * testsuite/ld-cris/tls-err-52.d, * testsuite/ld-cris/tls-err-53.d, * testsuite/ld-cris/tls-err-55.d, * testsuite/ld-cris/tls-err-56.d, * testsuite/ld-cris/tls-err-62.d, * testsuite/ld-cris/tls-err-65.d, * testsuite/ld-cris/tls-err-77.d, * testsuite/ld-elf/empty-implib.out, * testsuite/ld-elf/indirect.exp: Update.	2018-02-26 09:33:15 +10:30
Alan Modra	0aa13feeeb	unrecognized/unsupported reloc message ... It must get boring translating all the variants we have of unrecognized/unsupported/invalid/unexpected reloc number. This patch cuts down on the number of variations. * aoutx.h, * coff-alpha.c, * coff-i860.c, * coff-m68k.c, * coff-mcore.c, * coff-ppc.c, * coff-rs6000.c, * coff-sh.c, * coff-tic4x.c, * coff-tic54x.c, * coff-tic80.c, * coff-w65.c, * elf-bfd.h, * elf-m10300.c, * elf.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-i370.c, * elf32-i386.c, * elf32-i960.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c, * elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c, * elf32-wasm32.c, * elf32-xgate.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-mips.c, * elfxx-riscv.c, * elfxx-riscv.h, * elfxx-sparc.c, * elfxx-sparc.h, * reloc.c: Standardize unrecognized/unsupported reloc message.	2018-02-26 09:28:27 +10:30
Alan Modra	c1c8c1ef9a	Use %pI, %pR, %pS, %pT in place of %I, %R, %S and %T. ... bfd/ * elf32-arm.c, * elf32-hppa.c, * elf32-lm32.c, * elf32-m32r.c, * elf32-metag.c, * elf32-nds32.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-s390.c, * elf32-sh.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf64-ppc.c, * elf64-s390.c, * elflink.c, * elfnn-aarch64.c, * elfnn-riscv.c, * elfxx-sparc.c, * elfxx-tilegx.c, * elfxx-x86.c, * reloc.c: Replace use of %R and %T in format strings passed to einfo and friends by %pR and %pT. ld/ * ldmisc.c (vfinfo) Handle %pI, %pR, %pS and %pT in place of %I, %R, %S and %T. * ldcref.c, * ldctor.c, * ldemul.c, * ldexp.c, * ldgram.y, * ldlang.c, * ldlex.l, * ldmain.c, * ldmisc.c, * pe-dll.c, * emultempl/sh64elf.em: Replace use of of %I, %R, %S and %T in format strings passed to einfo and friends by %pI, %pR, %pS and %pT.	2018-02-19 23:55:53 +10:30
Alan Modra	871b3ab29e	Use %pA and %pB in messages rather than %A and %B ... First step towards compiler verification of _bfd_error_handler arguments, and better verification of translated messages. bfd/ * bfd.c (_bfd_doprnt, _bfd_doprnt_scan): Handle %pA and %pB in place of %A and %B. * aout-adobe.c: Update all messages using %A and %B. * aout-cris.c: Likewise. * aoutx.h: Likewise. * archive.c: Likewise. * binary.c: Likewise. * cache.c: Likewise. * coff-alpha.c: Likewise. * coff-arm.c: Likewise. * coff-i860.c: Likewise. * coff-mcore.c: Likewise. * coff-ppc.c: Likewise. * coff-rs6000.c: Likewise. * coff-sh.c: Likewise. * coff-tic4x.c: Likewise. * coff-tic54x.c: Likewise. * coff-tic80.c: Likewise. * coff64-rs6000.c: Likewise. * coffcode.h: Likewise. * coffgen.c: Likewise. * cofflink.c: Likewise. * coffswap.h: Likewise. * compress.c: Likewise. * cpu-arm.c: Likewise. * ecoff.c: Likewise. * elf-attrs.c: Likewise. * elf-eh-frame.c: Likewise. * elf-ifunc.c: Likewise. * elf-m10300.c: Likewise. * elf-properties.c: Likewise. * elf-s390-common.c: Likewise. * elf.c: Likewise. * elf32-arc.c: Likewise. * elf32-arm.c: Likewise. * elf32-avr.c: Likewise. * elf32-bfin.c: Likewise. * elf32-cr16.c: Likewise. * elf32-cr16c.c: Likewise. * elf32-cris.c: Likewise. * elf32-crx.c: Likewise. * elf32-d10v.c: Likewise. * elf32-d30v.c: Likewise. * elf32-epiphany.c: Likewise. * elf32-fr30.c: Likewise. * elf32-frv.c: Likewise. * elf32-gen.c: Likewise. * elf32-hppa.c: Likewise. * elf32-i370.c: Likewise. * elf32-i386.c: Likewise. * elf32-i960.c: Likewise. * elf32-ip2k.c: Likewise. * elf32-iq2000.c: Likewise. * elf32-lm32.c: Likewise. * elf32-m32c.c: Likewise. * elf32-m32r.c: Likewise. * elf32-m68hc11.c: Likewise. * elf32-m68hc12.c: Likewise. * elf32-m68hc1x.c: Likewise. * elf32-m68k.c: Likewise. * elf32-mcore.c: Likewise. * elf32-mep.c: Likewise. * elf32-metag.c: Likewise. * elf32-microblaze.c: Likewise. * elf32-moxie.c: Likewise. * elf32-msp430.c: Likewise. * elf32-mt.c: Likewise. * elf32-nds32.c: Likewise. * elf32-nios2.c: Likewise. * elf32-or1k.c: Likewise. * elf32-pj.c: Likewise. * elf32-ppc.c: Likewise. * elf32-rl78.c: Likewise. * elf32-rx.c: Likewise. * elf32-s390.c: Likewise. * elf32-score.c: Likewise. * elf32-score7.c: Likewise. * elf32-sh-symbian.c: Likewise. * elf32-sh.c: Likewise. * elf32-sh64.c: Likewise. * elf32-sparc.c: Likewise. * elf32-spu.c: Likewise. * elf32-tic6x.c: Likewise. * elf32-tilepro.c: Likewise. * elf32-v850.c: Likewise. * elf32-vax.c: Likewise. * elf32-visium.c: Likewise. * elf32-wasm32.c: Likewise. * elf32-xgate.c: Likewise. * elf32-xtensa.c: Likewise. * elf64-alpha.c: Likewise. * elf64-gen.c: Likewise. * elf64-hppa.c: Likewise. * elf64-ia64-vms.c: Likewise. * elf64-mmix.c: Likewise. * elf64-ppc.c: Likewise. * elf64-s390.c: Likewise. * elf64-sh64.c: Likewise. * elf64-sparc.c: Likewise. * elf64-x86-64.c: Likewise. * elfcode.h: Likewise. * elfcore.h: Likewise. * elflink.c: Likewise. * elfnn-aarch64.c: Likewise. * elfnn-ia64.c: Likewise. * elfnn-riscv.c: Likewise. * elfxx-mips.c: Likewise. * elfxx-sparc.c: Likewise. * elfxx-tilegx.c: Likewise. * elfxx-x86.c: Likewise. * hpux-core.c: Likewise. * ieee.c: Likewise. * ihex.c: Likewise. * libbfd.c: Likewise. * linker.c: Likewise. * mach-o.c: Likewise. * merge.c: Likewise. * mmo.c: Likewise. * oasys.c: Likewise. * pdp11.c: Likewise. * pe-mips.c: Likewise. * peXXigen.c: Likewise. * peicode.h: Likewise. * reloc.c: Likewise. * rs6000-core.c: Likewise. * srec.c: Likewise. * stabs.c: Likewise. * vms-alpha.c: Likewise. * xcofflink.c: Likewise. ld/ * ldmisc.c (vfinfo): Handle %pA and %pB in place of %A and %B. * ldcref.c: Update all messages using %A and %B. * ldexp.c: Likewise. * ldlang.c: Likewise. * ldmain.c: Likewise. * ldmisc.c: Likewise. * pe-dll.c: Likewise. * plugin.c: Likewise. * emultempl/beos.em: Likewise. * emultempl/cr16elf.em: Likewise. * emultempl/elf32.em: Likewise. * emultempl/m68kcoff.em: Likewise. * emultempl/m68kelf.em: Likewise. * emultempl/mmo.em: Likewise. * emultempl/nds32elf.em: Likewise. * emultempl/pe.em: Likewise. * emultempl/pep.em: Likewise. * emultempl/spuelf.em: Likewise. * emultempl/sunos.em: Likewise. * emultempl/xtensaelf.em: Likewise.	2018-02-19 23:55:53 +10:30
Alan Modra	d00dd7dc5e	Remove bfd stub function casts. ... This patch defines a bunch of new functions to use in the BFD target structs rather than casting bfd_false or bfd_true and similar stub functions. I've also renamed the stub functions to reflect their parameters and put "error" in the name if they set bfd_error. The latter change is important since there were quite a few uses of bfd_false where setting bfd_error was inappropriate, for example in elf_backend_allow_non_load_phdr and is_target_special_symbol. * libbfd.c (_bfd_bool_bfd_false_error): Rename from bfd_false. (_bfd_bool_bfd_true): Rename from bfd_true. (_bfd_ptr_bfd_null_error): Rename from bfd_nullvoidptr. (_bfd_int_bfd_0): Rename from bfd_0. (_bfd_uint_bfd_0): Rename from bfd_0u. (_bfd_long_bfd_0): Rename from bfd_0l. (_bfd_long_bfd_n1_error): Rename from _bfd_n1. (_bfd_void_bfd): Rename from bfd_void. (_bfd_bool_bfd_false, _bfd_bool_bfd_asymbol_false), (_bfd_bool_bfd_link_false_error), (_bfd_bool_bfd_link_true, _bfd_bool_bfd_bfd_true), (_bfd_bool_bfd_uint_true, _bfd_bool_bfd_ptr_true), (_bfd_bool_bfd_asection_bfd_asection_true), (_bfd_bool_bfd_asymbol_bfd_asymbol_true), (_bfd_void_bfd_link, _bfd_void_bfd_asection): New functions. * archive.c (_bfd_noarchive_get_elt_at_index), (_bfd_noarchive_openr_next_archived_file), (_bfd_noarchive_construct_extended_name_table), (_bfd_noarchive_write_ar_hdr, _bfd_noarchive_truncate_arname), (_bfd_noarchive_write_armap): New functions. * archures.c (_bfd_nowrite_set_arch_mach): New function. * coff-alpha.c (alpha_ecoff_swap_coff_aux_in), (alpha_ecoff_swap_coff_sym_in, alpha_ecoff_swap_coff_lineno_in), (alpha_ecoff_swap_coff_aux_out, alpha_ecoff_swap_coff_sym_out), (alpha_ecoff_swap_coff_lineno_out), (alpha_ecoff_swap_coff_reloc_out): New functions. * coff-mips.c (mips_ecoff_swap_coff_aux_in), (mips_ecoff_swap_coff_sym_in, mips_ecoff_swap_coff_lineno_in), (mips_ecoff_swap_coff_aux_out, mips_ecoff_swap_coff_sym_out), (mips_ecoff_swap_coff_lineno_out), (mips_ecoff_swap_coff_reloc_out): New functions. * coffcode.h (coff_set_alignment_hook): Replace define with new function. (symname_in_debug_hook): Likewise. * ecoff.c (_bfd_ecoff_set_alignment_hook): New function. * elfxx-target.h (elf_backend_allow_non_load_phdr): Default to 0. * elf.c (assign_file_positions_except_relocs): Test elf_backend_allow_non_load_phdr for NULL. * elflink.c (_bfd_elf_omit_section_dynsym_default): Rename from _bfd_elf_link_omit_section_dynsym. Update uses. (_bfd_elf_omit_section_dynsym_all): New function. * elf-bfd.h (_bfd_elf_link_omit_section_dynsym): Delete. (_bfd_elf_omit_section_dynsym_default): Declare. (_bfd_elf_omit_section_dynsym_all): Declare. * linker.c (_bfd_nolink_sizeof_headers, _bfd_nolink_bfd_relax_section), (_bfd_nolink_bfd_get_relocated_section_contents), (_bfd_nolink_bfd_lookup_section_flags), (_bfd_nolink_bfd_is_group_section, _bfd_nolink_bfd_discard_group), (_bfd_nolink_bfd_link_hash_table_create), (_bfd_nolink_bfd_link_just_syms), (_bfd_nolink_bfd_copy_link_hash_symbol_type), (_bfd_nolink_bfd_link_split_section), (_bfd_nolink_section_already_linked), (_bfd_nolink_bfd_define_common_symbol), (_bfd_nolink_bfd_define_start_stop): New functions. * reloc.c (_bfd_norelocs_bfd_reloc_type_lookup), (_bfd_norelocs_bfd_reloc_name_lookup), (_bfd_nodynamic_canonicalize_dynamic_reloc): New functions. * section.c (_bfd_nowrite_set_section_contents): New function. * syms.c (_bfd_nosymbols_canonicalize_symtab), (_bfd_nosymbols_print_symbol, _bfd_nosymbols_get_symbol_info), (_bfd_nosymbols_get_symbol_version_string), (_bfd_nosymbols_bfd_is_local_label_name), (_bfd_nosymbols_get_lineno, _bfd_nosymbols_find_nearest_line), (_bfd_nosymbols_find_line, _bfd_nosymbols_find_inliner_info), (_bfd_nosymbols_bfd_make_debug_symbol), ( _bfd_nosymbols_read_minisymbols), ( _bfd_nosymbols_minisymbol_to_symbol), (_bfd_nodynamic_get_synthetic_symtab): New functions. * libbfd-in.h: Declare new functions. Update existing defines, removing casts. * aix386-core.c: Update to use new hooks. Formatting. * aout-adobe.c: Likewise. * aout-arm.c: Likewise. * aout-target.h: Likewise. * aout-tic30.c: Likewise. * aoutf1.h: Likewise. * binary.c: Likewise. * bout.c: Likewise. * cisco-core.c: Likewise. * coff-alpha.c: Likewise. * coff-i386.c: Likewise. * coff-i860.c: Likewise. * coff-i960.c: Likewise. * coff-ia64.c: Likewise. * coff-mips.c: Likewise. * coff-ppc.c: Likewise. * coff-rs6000.c: Likewise. * coff-sh.c: Likewise. * coff-tic30.c: Likewise. * coff-tic54x.c: Likewise. * coff-x86_64.c: Likewise. * coff64-rs6000.c: Likewise. * coffcode.h: Likewise. * elf-m10300.c: Likewise. * elf32-cr16.c: Likewise. * elf32-lm32.c: Likewise. * elf32-m32r.c: Likewise. * elf32-metag.c: Likewise. * elf32-score.c: Likewise. * elf32-score7.c: Likewise. * elf32-tilepro.c: Likewise. * elf32-xstormy16.c: Likewise. * elf32-xtensa.c: Likewise. * elf64-alpha.c: Likewise. * elf64-hppa.c: Likewise. * elf64-ia64-vms.c: Likewise. * elf64-mmix.c: Likewise. * elf64-sh64.c: Likewise. * elfnn-ia64.c: Likewise. * elfxx-sparc.c: Likewise. * elfxx-target.h: Likewise. * elfxx-tilegx.c: Likewise. * elfxx-x86.h: Likewise. * hp300hpux.c: Likewise. * hppabsd-core.c: Likewise. * hpux-core.c: Likewise. * i386msdos.c: Likewise. * i386os9k.c: Likewise. * ieee.c: Likewise. * ihex.c: Likewise. * irix-core.c: Likewise. * libaout.h: Likewise. * libecoff.h: Likewise. * mach-o-target.c: Likewise. * mach-o.c: Likewise. * mipsbsd.c: Likewise. * mmo.c: Likewise. * netbsd-core.c: Likewise. * nlm-target.h: Likewise. * oasys.c: Likewise. * osf-core.c: Likewise. * pdp11.c: Likewise. * pe-mips.c: Likewise. * pe-x86_64.c: Likewise. * pef.c: Likewise. * plugin.c: Likewise. * ppcboot.c: Likewise. * ptrace-core.c: Likewise. * sco5-core.c: Likewise. * som.c: Likewise. * sparclynx.c: Likewise. * srec.c: Likewise. * tekhex.c: Likewise. * trad-core.c: Likewise. * verilog.c: Likewise. * versados.c: Likewise. * vms-alpha.c: Likewise. * vms-lib.c: Likewise. * wasm-module.c: Likewise. * xsym.c: Likewise. * libbfd.h: Regenerate.	2018-02-16 19:09:23 +10:30
Renlin Li	322474019d	[GAS][AARCH64]Add group relocations to create PC-relative offset. ... This is a patch to add the gas support for group relocations to create a 16, 32, 48, or 64 bit PC-relative offset inline. The following relocations are added along with the test cases: BFD_RELOC_AARCH64_MOVW_PREL_G0, BFD_RELOC_AARCH64_MOVW_PREL_G0_NC, BFD_RELOC_AARCH64_MOVW_PREL_G1, BFD_RELOC_AARCH64_MOVW_PREL_G1_NC, BFD_RELOC_AARCH64_MOVW_PREL_G2, BFD_RELOC_AARCH64_MOVW_PREL_G2_NC, BFD_RELOC_AARCH64_MOVW_PREL_G3. bfd/ 2018-01-24 Renlin Li <renlin.li@arm.com> * reloc.c: Add BFD_RELOC_AARCH64_MOVW_PREL_G0, BFD_RELOC_AARCH64_MOVW_PREL_G0_NC, BFD_RELOC_AARCH64_MOVW_PREL_G1, BFD_RELOC_AARCH64_MOVW_PREL_G1_NC, BFD_RELOC_AARCH64_MOVW_PREL_G2, BFD_RELOC_AARCH64_MOVW_PREL_G2_NC, BFD_RELOC_AARCH64_MOVW_PREL_G3. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elfnn-aarch64.c (elfNN_aarch64_howto_table): Add entries for BFD_RELOC_AARCH64_MOVW_PREL_G0, BFD_RELOC_AARCH64_MOVW_PREL_G0_NC, BFD_RELOC_AARCH64_MOVW_PREL_G1, BFD_RELOC_AARCH64_MOVW_PREL_G1_NC, BFD_RELOC_AARCH64_MOVW_PREL_G2, BFD_RELOC_AARCH64_MOVW_PREL_G2_NC, BFD_RELOC_AARCH64_MOVW_PREL_G3. gas/ 2018-01-24 Renlin Li <renlin.li@arm.com> * config/tc-aarch64.c (reloc_table): add entries for BFD_RELOC_AARCH64_MOVW_PREL_G0, BFD_RELOC_AARCH64_MOVW_PREL_G0_NC, BFD_RELOC_AARCH64_MOVW_PREL_G1, BFD_RELOC_AARCH64_MOVW_PREL_G1_NC, BFD_RELOC_AARCH64_MOVW_PREL_G2, BFD_RELOC_AARCH64_MOVW_PREL_G2_NC, BFD_RELOC_AARCH64_MOVW_PREL_G3. (process_movw_reloc_info): Supports newly added MOVW_PREL relocations. (md_apply_fix): Likewise * testsuite/gas/aarch64/prel_g0.s: New. * testsuite/gas/aarch64/prel_g0.d: New. * testsuite/gas/aarch64/prel_g0_nc.s: New. * testsuite/gas/aarch64/prel_g0_nc.d: New. * testsuite/gas/aarch64/prel_g1.s: New. * testsuite/gas/aarch64/prel_g1.d: New. * testsuite/gas/aarch64/prel_g1_nc.s: New. * testsuite/gas/aarch64/prel_g1_nc.d: New. * testsuite/gas/aarch64/prel_g2.s: New. * testsuite/gas/aarch64/prel_g2.d: New. * testsuite/gas/aarch64/prel_g2_nc.s: New. * testsuite/gas/aarch64/prel_g2_nc.d: New. * testsuite/gas/aarch64/prel_g3.s: New. * testsuite/gas/aarch64/prel_g3.d: New.	2018-01-24 16:19:47 +00:00
Alan Modra	219d1afa89	Update year range in copyright notice of binutils files	2018-01-03 17:49:56 +10:30
Alan Modra	07d6d2b834	BFD whitespace fixes ... Binutils is supposed to use tabs. In my git config I have whitespace = indent-with-non-tab,space-before-tab,trailing-space and I got annoyed enough seeing red in "git diff" output to fix the problems. * doc/header.sed: Trim trailing space when splitting lines. * aix386-core.c, * aout-adobe.c, * aout-arm.c, * aout-cris.c, * aout-ns32k.c, * aout-target.h, * aout-tic30.c, * aoutf1.h, * aoutx.h, * arc-got.h, * arc-plt.def, * arc-plt.h, * archive.c, * archive64.c, * archures.c, * armnetbsd.c, * bfd-in.h, * bfd.c, * bfdio.c, * binary.c, * bout.c, * cache.c, * cisco-core.c, * coff-alpha.c, * coff-apollo.c, * coff-arm.c, * coff-h8300.c, * coff-i386.c, * coff-i860.c, * coff-i960.c, * coff-m68k.c, * coff-m88k.c, * coff-mcore.c, * coff-mips.c, * coff-ppc.c, * coff-rs6000.c, * coff-sh.c, * coff-stgo32.c, * coff-tic4x.c, * coff-tic54x.c, * coff-tic80.c, * coff-we32k.c, * coff-x86_64.c, * coff-z80.c, * coff-z8k.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * coffswap.h, * compress.c, * corefile.c, * cpu-alpha.c, * cpu-arm.c, * cpu-avr.c, * cpu-bfin.c, * cpu-cr16.c, * cpu-cr16c.c, * cpu-crx.c, * cpu-d10v.c, * cpu-frv.c, * cpu-ft32.c, * cpu-i370.c, * cpu-i960.c, * cpu-ia64-opc.c, * cpu-ip2k.c, * cpu-lm32.c, * cpu-m32r.c, * cpu-mcore.c, * cpu-microblaze.c, * cpu-mips.c, * cpu-moxie.c, * cpu-mt.c, * cpu-nios2.c, * cpu-ns32k.c, * cpu-or1k.c, * cpu-powerpc.c, * cpu-pru.c, * cpu-sh.c, * cpu-spu.c, * cpu-v850.c, * cpu-v850_rh850.c, * cpu-xgate.c, * cpu-z80.c, * dwarf1.c, * dwarf2.c, * ecoff.c, * ecofflink.c, * ecoffswap.h, * elf-bfd.h, * elf-eh-frame.c, * elf-hppa.h, * elf-m10200.c, * elf-m10300.c, * elf-s390-common.c, * elf-strtab.c, * elf-vxworks.c, * elf.c, * elf32-am33lin.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-avr.h, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c, * elf32-i860.c, * elf32-i960.c, * elf32-ip2k.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c, * elf32-m68hc1x.c, * elf32-m68hc1x.h, * elf32-m68k.c, * elf32-m88k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nds32.h, * elf32-nios2.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-ppc.h, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score.h, * elf32-score7.c, * elf32-sh-symbian.c, * elf32-sh.c, * elf32-sh64.c, * elf32-sparc.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilegx.c, * elf32-tilegx.h, * elf32-tilepro.c, * elf32-tilepro.h, * elf32-v850.c, * elf32-vax.c, * elf32-wasm32.c, * elf32-xc16x.c, * elf32-xgate.c, * elf32-xgate.h, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sh64.c, * elf64-sparc.c, * elf64-tilegx.c, * elf64-tilegx.h, * elf64-x86-64.c, * elfcore.h, * elflink.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-aarch64.c, * elfxx-aarch64.h, * elfxx-ia64.c, * elfxx-ia64.h, * elfxx-mips.c, * elfxx-riscv.c, * elfxx-sparc.c, * elfxx-tilegx.c, * elfxx-x86.c, * elfxx-x86.h, * freebsd.h, * hash.c, * host-aout.c, * hp300hpux.c, * hppabsd-core.c, * hpux-core.c, * i386aout.c, * i386linux.c, * i386lynx.c, * i386mach3.c, * i386msdos.c, * i386netbsd.c, * ieee.c, * ihex.c, * irix-core.c, * libaout.h, * libbfd-in.h, * libbfd.c, * libcoff-in.h, * libnlm.h, * libpei.h, * libxcoff.h, * linker.c, * lynx-core.c, * m68k4knetbsd.c, * m68klinux.c, * m68knetbsd.c, * m88kmach3.c, * mach-o-aarch64.c, * mach-o-arm.c, * mach-o-i386.c, * mach-o-target.c, * mach-o-x86-64.c, * mach-o.c, * mach-o.h, * merge.c, * mipsbsd.c, * mmo.c, * netbsd.h, * netbsd-core.c, * newsos3.c, * nlm-target.h, * nlm32-ppc.c, * nlm32-sparc.c, * nlmcode.h, * ns32k.h, * ns32knetbsd.c, * oasys.c, * opncls.c, * pc532-mach.c, * pdp11.c, * pe-arm.c, * pe-i386.c, * pe-mcore.c, * pe-mips.c, * pe-x86_64.c, * peXXigen.c, * pef.c, * pef.h, * pei-arm.c, * pei-i386.c, * pei-mcore.c, * pei-x86_64.c, * peicode.h, * plugin.c, * ppcboot.c, * ptrace-core.c, * reloc.c, * riscix.c, * rs6000-core.c, * section.c, * som.c, * som.h, * sparclinux.c, * sparcnetbsd.c, * srec.c, * stabs.c, * sunos.c, * syms.c, * targets.c, * tekhex.c, * trad-core.c, * vax1knetbsd.c, * vaxnetbsd.c, * verilog.c, * versados.c, * vms-alpha.c, * vms-lib.c, * vms-misc.c, * wasm-module.c, * wasm-module.h, * xcofflink.c, * xsym.c, * xsym.h: Whitespace fixes. * bfd-in2.h, * libbfd.h, * libcoff.h: Regenerate.	2017-12-06 17:51:43 +10:30
Nick Clifton	b23dc97fe2	Fix a memory access violation when attempting to parse a corrupt COFF binary with a relocation that points beyond the end of the section to be relocated. ... PR 22506 * reloc.c (reloc_offset_in_range): Rename to bfd_reloc_offset_in_range and export. (bfd_perform_relocation): Rename function invocation. (bfd_install_relocation): Likewise. (bfd_final_link_relocate): Likewise. * bfd-in2.h: Regenerate. * coff-arm.c (coff_arm_reloc): Use bfd_reloc_offset_in_range. * coff-i386.c (coff_i386_reloc): Likewise. * coff-i860.c (coff_i860_reloc): Likewise. * coff-m68k.c (mk68kcoff_common_addend_special_fn): Likewise. * coff-m88k.c (m88k_special_reloc): Likewise. * coff-mips.c (mips_reflo_reloc): Likewise. * coff-x86_64.c (coff_amd64_reloc): Likewise.	2017-11-28 13:20:31 +00:00
James Bowman	81b42bcab1	FT32B is a new FT32 family member. It has a code compression scheme, which requires the use of linker relaxations. The change is quite large, so submission is in several parts. ... Part 2 adds a relaxation pass, which actually implements the code compression scheme. bfd * archures.c: Add bfd_mach_ft32b. * cpu-ft32.c: Add arch_info_struct. * elf32-ft32.c: Add R_FT32_RELAX, SC0, SC1, DIFF32. (ft32_elf_relocate_section): Add clauses for R_FT32_SC0, SC1, DIFF32. (ft32_reloc_shortable, elf32_ft32_is_diff_reloc, elf32_ft32_adjust_diff_reloc_value, elf32_ft32_adjust_reloc_if_spans_insn, elf32_ft32_relax_delete_bytes, elf32_ft32_relax_is_branch_target, ft32_elf_relax_section): New function. * reloc.c: Add BFD_RELOC_FT32_RELAX, SC0, SC1, DIFF32. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas * config/tc-ft32.c (md_assemble): add relaxation reloc BFD_RELOC_FT32_RELAX. (md_longopts): Add "norelax" and "no-relax". (md_apply_fix): Add reloc BFD_RELOC_FT32_DIFF32. (relaxable_section, ft32_validate_fix_sub, ft32_force_relocation, ft32_allow_local_subtract): New function. * config/tc-ft32.h: remove unused MD_PCREL_FROM_SECTION. * testsuite/gas/ft32/insnsc.s: New test exercising all FT32B shortcodes. include * elf/ft32.h: Add R_FT32_RELAX, SC0, SC1, DIFF32.	2017-11-01 15:33:24 +00:00
James Bowman	3b4b0a629a	FT32: support for FT32B processor - part 1 ... FT32B is a new FT32 family member. It has a code compression scheme, which requires the use of linker relaxations. The change is quite large, so submission is in several parts. Part 1 adds a 15-bit instruction field, and CPU-specific functions for the code compression that are used in binutils and GDB. bfd/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf32-ft32.c: Add HOWTO R_FT32_15. * reloc.c: Add BFD_RELOC_FT32_15. gas/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * config/tc-ft32.c (md_assemble): Replace FT32_FLD_K8 with K15. (md_apply_fix, tc_gen_reloc): Add BFD_RELOC_FT32_15. include/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * elf/ft32.h: Add R_FT32_15. * opcode/ft32.h: Replace FT32_FLD_K8 with K15. (ft32_shortcode, sc_compar, ft32_split_shortcode, ft32_merge_shortcode, ft32_merge_shortcode): New functions. opcodes/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * opcodes/ft32-dis.c (print_insn_ft32): Replace FT32_FLD_K8 with K15. * opcodes/ft32-opc.c (ft32_opc_info): Replace FT32_FLD_K8 with K15. Add jmpix pattern. sim/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * sim/ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.	2017-10-12 18:41:29 -07:00
Nick Clifton	1d75a8e26e	Force the AArch64 linker backend to refuse to link when it encounters unresoleable relocations. ... * reloc.c (enum bfd_reloc_status): Start values at 2. * bfd-in2.h: Regenerate. * elfnn-aarch64.c (aarch64_relocate): Invert sense of function, so that a TRUE return indicates success. Compare the result of calling _bfd_aarch64_elf_put_addend against bfd_reloc_ok. (build_one_stub): Change sense of tests against aarch64_relocate return value. (elfNN_aarch64_tls_relax): Return bfd_reloc_notsupported, rather than FALSE, when an error is detected. (elfNN_aarch64_final_link_relocate): Likewise. * testsuite/ld-aarch64/pcrel_pic_defined.d: Expect errors not warnings. Expect errors about unsupported relocations. * testsuite/ld-aarch64/pcrel_pic_undefined.d: Likewise.	2017-10-12 13:38:20 +01:00
Nick Clifton	47aeb64c10	Improve "unrecognized relocation" error messages to add the suggestion that the linker might be out of date. ... PR 21803 * reloc.c (_bfd_unrecognized_reloc): New function. Reports an unrecognized reloc and sets the bfd_error value. * libbfd.h: Regenerate. * elf32-arm.c (elf32_arm_final_link_relocate): Use the new function. * elf32-i386.c (elf_i386_relocate_section): Likewise. * elf32-tilepro.c (tilepro_elf_relocate_section): Likewise. * elf64-x86-64.c (elf_x86_64_relocate_section): Likewise. * elfnn-aarch64.c (elfNN_aarch64_relocate_section): Likewise. * elfxx-tilegx.c (tilegx_elf_relocate_section): Likewise.	2017-07-24 11:27:33 +01:00
John Eric Martin	684d5a10b1	[ARC] Add JLI support. ... The following relocation types were added to GCC/binutils: ARC_JLI_SECTOFF is a relocation type in Metaware that is now used by GCC as well to adjust the index of function calls to functions with attribute jli_call_always. bfd/ 2017-07-19 Claudiu Zissulescu <claziss@synopsys.com> John Eric Martin <John.Martin@emmicro-us.com> * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf32-arc.c (JLI): Define. * reloc.c: Add JLI relocations. gas/ 2017-07-19 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/jli-1.d: New file. * testsuite/gas/arc/jli-1.s: Likewise. * testsuite/gas/arc/taux.d: Update for jli_base. include/ 2017-07-19 Claudiu Zissulescu <claziss@synopsys.com> John Eric Martin <John.Martin@emmicro-us.com> * elf/arc-reloc.def: Add JLI relocs howto. * opcode/arc-func.h (replace_jli): New function. ld/ 2017-07-19 Claudiu Zissulescu <claziss@synopsys.com> John Eric Martin <John.Martin@emmicro-us.com> * emulparams/arcelf.sh (JLI_START_TABLE): Define. * scripttempl/elfarc.sc: Handle jlitab section. * scripttempl/elfarcv2.sc: Likewise. * testsuite/ld-arc/arc.exp: Add JLI test. * testsuite/ld-arc/jli-script.ld: New file. * testsuite/ld-arc/jli-simple.dd: Likewise. * testsuite/ld-arc/jli-simple.rd: Likewise. * testsuite/ld-arc/jli-simple.s: Likewise. * testsuite/ld/testsuite/ld-arc/jli-overflow.s: Likewise. * testsuite/ld/testsuite/ld-arc/jli-overflow.d: Likewise. * testsuite/ld/testsuite/ld-arc/jli-overflow.err: Likewise. opcode/ 2017-07-19 Claudiu Zissulescu <claziss@synopsys.com> John Eric Martin <John.Martin@emmicro-us.com> * arc-opc.c (UIMM10_6_S_JLIOFF): Define. (UIMM3_23): Adjust accordingly. * arc-regs.h: Add/correct jli_base register. * arc-tbl.h (jli_s): Likewise.	2017-07-19 09:56:55 +02:00
Kuan-Lin Chen	a6cbf936e3	RISC-V: Use pc-relative relocation for FDE initial location ... The symbol address in .eh_frame may be adjusted in _bfd_elf_discard_section_eh_frame, and the content of .eh_frame will be adjusted in _bfd_elf_write_section_eh_frame. Therefore, we cannot insert a relocation whose addend symbol is in .eh_frame. Othrewise, the value may be adjusted twice. bfd/ChangeLog 2017-06-26 Kuan-Lin Chen <rufus@andestech.com> * elfnn-riscv.c (perform_relocation): Support the new R_RISCV_32_PCREL relocation. (riscv_elf_relocate_section): Likewise. * elfxx-riscv.c (howto_table): Likewise. (riscv_reloc_map): Likewise. * bfd-in2.h (BFD_RELOC_RISCV_32_PCREL): New relocation. * libbfd.h: Regenerate. gas/ChangeLog 2017-06-26 Kuan-Lin Chen <rufus@andestech.com> * config/tc-riscv.c (md_apply_fix) [BFD_RELOC_32]: Convert to a R_RISCV_32_PCREL relocation. include/ChangeLog 2017-06-26 Kuan-Lin Chen <rufus@andestech.com> * elf/riscv.h (R_RISCV_32_PCREL): New.	2017-06-26 18:26:40 -07:00
Jiong Wang	4aa57d6a2b	[AArch64] Fix typo in comments on relocation name ... BFD_RELOC_AARCH64_ADR_GOTPAGE should be BFD_RELOC_AARCH64_ADR_GOT_PAGE. bfd/ * reloc.c (BFD_RELOC_AARCH64_ADR_GOTPAGE): Rename to BFD_RELOC_AARCH64_ADR_GOT_PAGE * bfd-in2.h: Regenerated.	2017-06-23 13:45:30 +01:00
Nick Clifton	20bd1b6ba5	Fix seg-fault in the BFD parsing a corrupt input binary. ... PR binutils/21645 * reloc.c (bfd_generic_get_relocated_section_contents): Fail if bfd_get_full_section_contents returns no contents.	2017-06-21 13:18:46 +01:00
Jose E. Marchesi	2318686590	bfd: new BFD target entry point _bfd_set_reloc. ... This patch adds a new entry point to the BFD_JUMP_TABLE_RELOCS. The previous common implementation `bfd_set_reloc', in bfd/bfd.c, has been moved to bfd/reloc.c with the name `_bfd_generic_set_reloc', and all BFD targets has been adapted to use it. This patch doesn't introduce any change on functionality, but prepares the ground for further work. bfd/ChangeLog: 2017-05-10 Jose E. Marchesi <jose.marchesi@oracle.com> * targets.c (BFD_JUMP_TABLE_RELOCS): Add NAME##_set_reloc. (struct bfd_target): New field _bfd_set_reloc. * bfd.c (bfd_set_reloc): Call backend _set_bfd. * reloc.c (_bfd_generic_set_reloc): New function. * coffcode.h (coff_set_reloc): Define to _bfd_generic_set_reloc. * nlm-target.h (nlm_set_reloc): Likewise. * coff-rs6000.c (_bfd_xcoff_set_reloc): Likewise. * aout-tic30.c (MY_set_reloc): Likewise. * aout-target.h (MY_set_reloc): Likewise. * elfxx-target.h (bfd_elfNN_set_reloc): Likewise. * coff-alpha.c (_bfd_ecoff_set_reloc): Likewise. * mach-o-target.c (bfd_mach_o_set_reloc): Likewise. * vms-alpha.c (alpha_vms_set_reloc): Likewise. * aout-adobe.c (aout_32_set_reloc): Likewise. * bout.c (b_out_set_reloc): Likewise. * coff-mips.c (_bfd_ecoff_set_reloc): Likewise. * i386os9k.c (aout_32_set_reloc): Likewise. * ieee.c (ieee_set_reloc): Likewise. * oasys.c (oasys_set_reloc): Likewise. * som.c (som_set_reloc): Likewise. * versados.c (versados_set_reloc): Likewise. * coff64-rs6000.c (rs6000_xcoff64_vec): Add _bfd_generic_set_reloc. (rs6000_xcoff64_aix_vec): LIkewise. * libbfd.c (_bfd_norelocs_set_reloc): New function. * libbfd-in.h: Prototype for _bfd_norelocs_set_reloc. * i386msdos.c (msdos_set_reloc): Define to _bfd_norelocs_set_reloc. * elfcode.h (elf_set_reloc): Define. * bfd-in2.h: Regenerated.	2017-05-10 18:45:30 +02:00
Alan Modra	a941291cab	PR21432, buffer overflow in perform_relocation ... The existing reloc offset range tests didn't catch small negative offsets less than the size of the reloc field. PR 21432 * reloc.c (reloc_offset_in_range): New function. (bfd_perform_relocation, bfd_install_relocation): Use it. (_bfd_final_link_relocate): Likewise.	2017-04-29 18:59:37 +09:30
Nick Clifton	04b31182bf	Fix a seg-fault when processing a corrupt binary containing reloc(s) with negative addresses. ... PR binutils/21434 * reloc.c (bfd_perform_relocation): Check for a negative address in the reloc.	2017-04-26 16:30:22 +01:00
Pip Cet	f96bd6c2d7	Add support for the WebAssembly file format and the wasm32 ELF conversion to gas and the binutils. ... binutils * readelf.c: Add support for wasm32 ELF format WebAssembly files. (guess_is_rela): Likewise. (dump_relocations): Likewise. (is_32bit_abs_reloc): Likewise. (is_none_reloc_): Likewise. * NEWS: Mention the new support. * testsuite/lib/binutils-common.exp (is_elf_format): Mark wasm32 as ELF target. (supports_gnu_unique): Mark wasm32 as supporting STB_GNU_UNIQUE. * testsuite/binutils-all/nm.exp: Mark wasm32 as requiring .size annotations. * testsuite/binutils-all/wasm32: New directory. * testsuite/binutils-all/wasm32/create-wasm.d: New file. * testsuite/binutils-all/wasm32/create-wasm.s: Likewise. * testsuite/binutils-all/wasm32/custom-section.d: Likewise. * testsuite/binutils-all/wasm32/custom-section.s: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.d: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.s: Likewise. * testsuite/binutils-all/wasm32/long-sections.d: Likewise. * testsuite/binutils-all/wasm32/long-sections.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.s: Likewise. * testsuite/binutils-all/wasm32/prepared-section.d: Likewise. * testsuite/binutils-all/wasm32/prepared-section.s: Likewise. * testsuite/binutils-all/wasm32/wasm32.exp: New file, run tests. gas * config/tc-wasm32.h: New file: Add WebAssembly assembler target. * config/tc-wasm32.c: New file: Add WebAssembly assembler target. * Makefile.am: Add WebAssembly assembler target. * configure.tgt: Add WebAssembly assembler target. * doc/c-wasm32.texi: New file: Start documenting WebAssembly assembler. * doc/all.texi: Define WASM32. * doc/as.texinfo: Add WebAssembly entries. * NEWS: Mention the new support. * Makefile.in: Regenerate. * po/gas.pot: Regenerate. * po/POTFILES.in: Regenerate. * testsuite/gas/wasm32: New directory. * testsuite/gas/wasm32/allinsn.d: New file. * testsuite/gas/wasm32/allinsn.s: New file. * testsuite/gas/wasm32/illegal.l: New file. * testsuite/gas/wasm32/illegal.s: New file. * testsuite/gas/wasm32/illegal-2.l: New file. * testsuite/gas/wasm32/illegal-2.s: New file. * testsuite/gas/wasm32/illegal-3.l: New file. * testsuite/gas/wasm32/illegal-3.s: New file. * testsuite/gas/wasm32/illegal-4.l: New file. * testsuite/gas/wasm32/illegal-4.s: New file. * testsuite/gas/wasm32/illegal-5.l: New file. * testsuite/gas/wasm32/illegal-5.s: New file. * testsuite/gas/wasm32/illegal-6.l: New file. * testsuite/gas/wasm32/illegal-6.s: New file. * testsuite/gas/wasm32/illegal-7.l: New file. * testsuite/gas/wasm32/illegal-7.s: New file. * testsuite/gas/wasm32/illegal-8.l: New file. * testsuite/gas/wasm32/illegal-8.s: New file. * testsuite/gas/wasm32/illegal-9.l: New file. * testsuite/gas/wasm32/illegal-9.s: New file. * testsuite/gas/wasm32/illegal-10.l: New file. * testsuite/gas/wasm32/illegal-10.s: New file. * testsuite/gas/wasm32/illegal-11.l: New file. * testsuite/gas/wasm32/illegal-11.s: New file. * testsuite/gas/wasm32/illegal-12.l: New file. * testsuite/gas/wasm32/illegal-12.s: New file. * testsuite/gas/wasm32/illegal-13.l: New file. * testsuite/gas/wasm32/illegal-13.s: New file. * testsuite/gas/wasm32/illegal-14.l: New file. * testsuite/gas/wasm32/illegal-14.s: New file. * testsuite/gas/wasm32/illegal-15.l: New file. * testsuite/gas/wasm32/illegal-15.s: New file. * testsuite/gas/wasm32/illegal-16.l: New file. * testsuite/gas/wasm32/illegal-16.s: New file. * testsuite/gas/wasm32/illegal-17.l: New file. * testsuite/gas/wasm32/illegal-17.s: New file. * testsuite/gas/wasm32/illegal-18.l: New file. * testsuite/gas/wasm32/illegal-18.s: New file. * testsuite/gas/wasm32/illegal-19.l: New file. * testsuite/gas/wasm32/illegal-19.s: New file. * testsuite/gas/wasm32/illegal-20.l: New file. * testsuite/gas/wasm32/illegal-20.s: New file. * testsuite/gas/wasm32/illegal-21.l: New file. * testsuite/gas/wasm32/illegal-21.s: New file. * testsuite/gas/wasm32/illegal-22.l: New file. * testsuite/gas/wasm32/illegal-22.s: New file. * testsuite/gas/wasm32/illegal-24.l: New file. * testsuite/gas/wasm32/illegal-24.s: New file. * testsuite/gas/wasm32/illegal-25.l: New file. * testsuite/gas/wasm32/illegal-25.s: New file. * testsuite/gas/wasm32/reloc.d: New file. * testsuite/gas/wasm32/reloc.s: New file. * testsuite/gas/wasm32/wasm32.exp: New tests for WebAssembly architecture. opcodes * configure.ac: Add (empty) bfd_wasm32_arch target. * configure: Regenerate * po/opcodes.pot: Regenerate. include * opcode/wasm.h: New file to support wasm32 architecture. * elf/wasm32.h: Add R_WASM32_32 relocation. bfd * elf32-wasm32.c: Add relocation code, two relocs. * reloc.c: Add wasm32 relocations. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. * bfd/po/bfd.pot: Regenerate.	2017-03-30 10:57:21 +01:00
Nick Clifton	f955cccff3	Rename R_AARCH64_TLSDESC_LD64_LO12_NC to R_AARCH64_TLSDESC_LD64_LO12 and R_AARCH64_TLSDESC_ADD_LO12_NC to R_AARCH64_TLSDESC_ADD_LO12. ... PR binutils/21202 include * elf/aarch64.h (R_AARCH64_TLSDESC_LD64_LO12_NC): Rename to R_AARCH64_TLSDESC_LD64_LO12. (R_AARCH64_TLSDESC_ADD_LO12_NC): Rename to R_AARCH64_TLSDESC_ADD_LO12_NC. bfd * reloc.c (BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC): Rename to BFD_RELOC_AARCH64_TLSDESC_LD64_LO12. (BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC): Rename to BFD_RELOC_AARCH64_TLSDESC_ADD_LO12. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elfnn-aarch64.c (IS_AARCH64_TLS_RELAX_RELOC): Update reloc names. (IS_AARCH64_TLSDESC_RELOC): Likewise. (elfNN_aarch64_howto_table): Likewise. (aarch64_tls_transition_without_check): Likewise. (aarch64_reloc_got_type): Likewise. (elfNN_aarch64_final_link_relocate): Likewise. (elfNN_aarch64_tls_relax): Likewise. (elfNN_aarch64_relocate_section): Likewise. (elfNN_aarch64_gc_sweep_hook): Likewise. (elfNN_aarch64_check_relocs): Likewise. * elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise. (_bfd_aarch64_elf_resolve_relocation): Likewise. gas * config/tc-aarch64.c (reloc_table): Rename BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC to BFD_RELOC_AARCH64_TLSDESC_LD64_LO12. Rname BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC to BFD_RELOC_AARCH64_TLSDESC_ADD_LO12. (md_apply_fix): Likewise. (aarch64_force_relocation): Likewise. * testsuite/gas/aarch64/tls.d: Update regexp. ld * testsuite/ld-aarch64/ifunc-5r-local.d: Update regexp.	2017-03-13 09:58:04 +00:00
Alan Modra	7ba71655a4	PowerPC addpcis fix ... This came up because I was looking at ld/tmpdir/addpcis.o and noticed the odd addends on REL16DX_HA. They ought to both be -4. The error crept in due REL16DX_HA howto being pc-relative (as indeed it should be), and code at gas/write.c:1001 after this comment /* Make it pc-relative. If the back-end code has not selected a pc-relative reloc, cancel the adjustment we do later on all pc-relative relocs. */ *not* cancelling the pc-relative adjustment. So I've made a dummy non-relative split reloc so that the generic code handles this, rather than attempting to add hacks later in md_apply_fix which would not be very robust. Having the new internal reloc also makes it easy to support addpcis rx,sym@ha as an equivalent to addpcis rx,(sym-0f)@ha 0: The patch also fixes overflow checking, which must test whether the addi will overflow too since @l relocs don't have any overflow check. Lastly, since I was poking at md_apply_fix, I arranged to have the generic gas/write.c code emit errors for subtraction expressions where we lack reloc support. include/ * elf/ppc64.h (R_PPC64_16DX_HA): New. Expand fake reloc comment. * elf/ppc.h (R_PPC_16DX_HA): Likewise. bfd/ * reloc.c (BFD_RELOC_PPC_16DX_HA): New. * elf64-ppc.c (ppc64_elf_howto_raw <R_PPC64_16DX_HA>): New howto. (ppc64_elf_reloc_type_lookup): Translate new bfd reloc. (ppc64_elf_ha_reloc): Correct overflow test on REL16DX_HA. (ppc64_elf_relocate_section): Likewise. * elf32-ppc.c (ppc_elf_howto_raw <R_PPC_16DX_HA>): New howto. (ppc_elf_reloc_type_lookup): Translate new bfd reloc. (ppc_elf_check_relocs): Handle R_PPC_16DX_HA to pacify gcc. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. gas/ * config/tc-ppc.c (md_assemble): Use BFD_RELOC_PPC_16DX_HA for addpcis. (md_apply_fix): Remove fx_subsy check. Move code converting to pcrel reloc earlier and handle BFD_RELOC_PPC_16DX_HA. Remove code emiiting errors on seeing fx_pcrel set on unexpected relocs, as that is done now by the generic code via.. * config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): ..this. Define. (TC_VALIDATE_FIX_SUB): Define. ld/ * testsuite/ld-powerpc/addpcis.d: Define ext1 and ext2 at limits of addpcis range.	2017-02-28 11:59:47 +10:30
Alan Modra	2571583aed	Update year range in copyright notice of all files.	2017-01-02 14:08:56 +10:30
Dimitar Dimitrov	889294f6ff	PRU BFD support ... include/ * elf/common.h: Add PRU ELF. * elf/pru.h: New file. * opcode/pru.h: New file. * dis-asm.h (print_insn_pru): Declare. bfd/ * archures.c: Add bfd_arch_pru. * Makefile.am: Add PRU target. * config.bfd: Ditto. * configure.ac: Ditto. * elf-bfd.h (enum elf_target_id): Add PRU_ELF_DATA. * targets.c: Add pru_elf32_vec. * reloc.c: Add PRU relocations. * cpu-pru.c: New file. * elf32-pru.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. * bfd-in2.h: Regenerate * libbfd.h: Regenerate. Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>	2016-12-31 12:02:09 +10:30
Andrew Waterman	45f764234a	Rework RISC-V relocations ... Before this commit we didn't cleanly support CFI directives because the internal offsets used to get relaxed which broke them. This patch significantly reworks how we handle linker relaxations: * DWARF is now properly supported * There is a ".option norelax" to disable relaxations, for when users write assembly that can't be relaxed (if it's to be later patched up, for example). * There is an additional _RELAX relocation that specifies when previous relocations can be relaxed. We're in the process of documenting the RISC-V ELF ABI, which will include documentation of our relocations https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md but we expect that this relocation set will remain ABI compatible in the future (ie, it's safe to release). Thanks to Kuan-Lin Chen for figuring out how to correctly relax the debug info! include/ * elf/riscv.h: Add R_RISCV_TPREL_I through R_RISCV_SET32. bfd/ * reloc.c (BFD_RELOC_RISCV_TPREL_I): New relocation. (BFD_RELOC_RISCV_TPREL_S): Likewise. (BFD_RELOC_RISCV_RELAX): Likewise. (BFD_RELOC_RISCV_CFA): Likewise. (BFD_RELOC_RISCV_SUB6): Likewise. (BFD_RELOC_RISCV_SET8): Likewise. (BFD_RELOC_RISCV_SET8): Likewise. (BFD_RELOC_RISCV_SET16): Likewise. (BFD_RELOC_RISCV_SET32): Likewise. * elfnn-riscv.c (perform_relocation): Handle the new relocations. (_bfd_riscv_relax_tls_le): Likewise. (_bfd_riscv_relax_align): Likewise. (_bfd_riscv_relax_section): Likewise. (howto_table): Likewise. (riscv_reloc_map): Likewise. (relax_func_t): New type. (_bfd_riscv_relax_call): Add reserve_size argument, which controls the maximal offset pessimism. Correct type of max_alignment. (_bfd_riscv_relax_lui): Likewise. (_bfd_riscv_relax_tls_le): Likewise. (_bfd_riscv_relax_align): Likewise. (_bfd_riscv_relax_section): Compute the required reserve size when relocating and use it to when calling relax_func. * bfd-in2.h: Regenerate. * libbfd.h: Likewise. gas/ * config/tc-riscv.c (riscv_set_options): Add relax. (riscv_opts): Likewise. (s_riscv_option): Add relax and norelax. (riscv_apply_const_reloc): New function. (append_insn): Move constant relocation handling to riscv_apply_const_reloc. (md_pcrel_from): Likewise. (parse_relocation): Skip BFD_RELOC_UNUSED. (md_pcrel_from): Handle BFD_RELOC_RISCV_SUB6, BFD_RELOC_RISCV_RELAX, BFD_RELOC_RISCV_CFA. (md_apply_fix): Likewise. (riscv_pre_output_hook): New function. * config/tc-riscv.h (md_pre_output_hook): Define. (riscv_pre_output_hook): Declare. (DWARF_CIE_DATA_ALIGNMENT): Always -4.	2016-12-20 12:26:33 +10:30
Maciej W. Rozycki	af955fe696	BFD: Fix double BFD_FAIL calls in `bfd_default_reloc_type_lookup' ... Break out of the outer switch statement once the inner switch for the BFD_RELOC_CTOR relocation has been processed, preventing double BFD_FAIL calls from being made, once from the inner switch and then again from the default case of the outer switch. Noticed with a `-Wimplicit-fallthrough' build error reported by a recent GCC version: In file included from .../bfd/reloc.c:52:0: .../bfd/reloc.c: In function 'bfd_default_reloc_type_lookup': .../bfd/libbfd.h:779:8: error: this statement may fall through [-Werror=implicit-fallthrough=] do { bfd_assert(__FILE__,__LINE__); } while (0) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .../bfd/reloc.c:7780:4: note: in expansion of macro 'BFD_FAIL' BFD_FAIL (); ^~~~~~~~ .../bfd/reloc.c:7782:5: note: here default: ^~~~~~~ cc1: all warnings being treated as errors make[4]: *** [reloc.lo] Error 1 bfd/ * reloc.c (bfd_default_reloc_type_lookup) <BFD_RELOC_CTOR>: Do not fall through to the default case.	2016-11-01 22:57:56 +00:00
Nick Clifton	e23eba971d	Add support for RISC-V architecture. ... bfd * Makefile.am: Add entries for riscv32-elf and riscv64-elf. * config.bdf: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * archures.c: Add bfd_riscv_arch. * reloc.c: Add riscv relocs. * targets.c: Add riscv_elf32_vec and riscv_elf64_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf-bfd.h: Add RISCV_ELF_DATA to enum elf_target_id. * elfnn-riscv.c: New file. * elfxx-riscv.c: New file. * elfxx-riscv.h: New file. binutils* readelf.c (guess_is_rela): Add EM_RISCV. (get_machine_name): Likewise. (dump_relocations): Add support for riscv relocations. (get_machine_flags): Add support for riscv flags. (is_32bit_abs_reloc): Add R_RISCV_32. (is_64bit_abs_reloc): Add R_RISCV_64. (is_none_reloc): Add R_RISCV_NONE. * testsuite/binutils-all/objdump.exp (cpus_expected): Add riscv. Expect the debug_ranges test to fail. gas * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this architecture. * configure.in: Define a default architecture. * configure: Regenerate. * configure.tgt: Add entries for riscv. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Expect the redef tests to fail. * testsuite/gas/elf/elf.exp: Expect the groupauto tests to fail. * config/tc-riscv.c: New file. * config/tc-riscv.h: New file. * doc/c-riscv.texi: New file. * testsuite/gas/riscv: New directory. * testsuite/gas/riscv/riscv.exp: New file. * testsuite/gas/riscv/t_insns.d: New file. * testsuite/gas/riscv/t_insns.s: New file. ld * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this target. * configure.tgt: Add riscv entries. * emulparams/elf32lriscv-defs.sh: New file. * emulparams/elf32lriscv.sh: New file. * emulparams/elf64lriscv-defs.sh: New file. * emulparams/elf64lriscv.sh: New file. * emultempl/riscvelf.em: New file. opcodes * configure.ac: Add entry for bfd_riscv_arch. * configure: Regenerate. * disassemble.c (disassembler): Add support for riscv. (disassembler_usage): Likewise. * riscv-dis.c: New file. * riscv-opc.c: New file. include * dis-asm.h: Add prototypes for print_insn_riscv and print_riscv_disassembler_options. * elf/riscv.h: New file. * opcode/riscv-opc.h: New file. * opcode/riscv.h: New file.	2016-11-01 16:45:57 +00:00
Nick Clifton	695344c018	Add c-format tags to translatable strings with more than one argument-using formatting token. ... * aout-adobe.c: Add missing c-format tags for translatable strings. * aout-cris.c: Likewise. * aoutx.h: Likewise. * bfd.c: Likewise. * binary.c: Likewise. * cache.c: Likewise. * coff-alpha.c: Likewise. * coff-arm.c: Likewise. * coff-i860.c: Likewise. * coff-mcore.c: Likewise. * coff-ppc.c: Likewise. * coff-rs6000.c: Likewise. * coff-sh.c: Likewise. * coff-tic4x.c: Likewise. * coff-tic54x.c: Likewise. * coff-tic80.c: Likewise. * coff64-rs6000.c: Likewise. * coffcode.h: Likewise. * coffgen.c: Likewise. * cofflink.c: Likewise. * coffswap.h: Likewise. * cpu-arm.c: Likewise. * dwarf2.c: Likewise. * ecoff.c: Likewise. * elf-attrs.c: Likewise. * elf-eh-frame.c: Likewise. * elf-ifunc.c: Likewise. * elf-m10300.c: Likewise. * elf-s390-common.c: Likewise. * elf.c: Likewise. * elf32-arc.c: Likewise. * elf32-arm.c: Likewise. * elf32-avr.c: Likewise. * elf32-bfin.c: Likewise. * elf32-cr16.c: Likewise. * elf32-cr16c.c: Likewise. * elf32-cris.c: Likewise. * elf32-crx.c: Likewise. * elf32-d10v.c: Likewise. * elf32-d30v.c: Likewise. * elf32-epiphany.c: Likewise. * elf32-fr30.c: Likewise. * elf32-frv.c: Likewise. * elf32-gen.c: Likewise. * elf32-hppa.c: Likewise. * elf32-i370.c: Likewise. * elf32-i386.c: Likewise. * elf32-i960.c: Likewise. * elf32-ip2k.c: Likewise. * elf32-iq2000.c: Likewise. * elf32-lm32.c: Likewise. * elf32-m32c.c: Likewise. * elf32-m32r.c: Likewise. * elf32-m68hc11.c: Likewise. * elf32-m68hc12.c: Likewise. * elf32-m68hc1x.c: Likewise. * elf32-m68k.c: Likewise. * elf32-mcore.c: Likewise. * elf32-mep.c: Likewise. * elf32-metag.c: Likewise. * elf32-microblaze.c: Likewise. * elf32-moxie.c: Likewise. * elf32-msp430.c: Likewise. * elf32-mt.c: Likewise. * elf32-nds32.c: Likewise. * elf32-nios2.c: Likewise. * elf32-or1k.c: Likewise. * elf32-pj.c: Likewise. * elf32-ppc.c: Likewise. * elf32-rl78.c: Likewise. * elf32-rx.c: Likewise. * elf32-s390.c: Likewise. * elf32-score.c: Likewise. * elf32-score7.c: Likewise. * elf32-sh-symbian.c: Likewise. * elf32-sh.c: Likewise. * elf32-sh64.c: Likewise. * elf32-spu.c: Likewise. * elf32-tic6x.c: Likewise. * elf32-tilepro.c: Likewise. * elf32-v850.c: Likewise. * elf32-vax.c: Likewise. * elf32-visium.c: Likewise. * elf32-xgate.c: Likewise. * elf32-xtensa.c: Likewise. * elf64-alpha.c: Likewise. * elf64-gen.c: Likewise. * elf64-hppa.c: Likewise. * elf64-ia64-vms.c: Likewise. * elf64-mmix.c: Likewise. * elf64-ppc.c: Likewise. * elf64-s390.c: Likewise. * elf64-sh64.c: Likewise. * elf64-sparc.c: Likewise. * elf64-x86-64.c: Likewise. * elfcode.h: Likewise. * elfcore.h: Likewise. * elflink.c: Likewise. * elfnn-aarch64.c: Likewise. * elfnn-ia64.c: Likewise. * elfxx-mips.c: Likewise. * elfxx-sparc.c: Likewise. * elfxx-tilegx.c: Likewise. * ieee.c: Likewise. * ihex.c: Likewise. * libbfd.c: Likewise. * linker.c: Likewise. * m68klinux.c: Likewise. * mach-o.c: Likewise. * merge.c: Likewise. * mmo.c: Likewise. * oasys.c: Likewise. * pdp11.c: Likewise. * pe-mips.c: Likewise. * peXXigen.c: Likewise. * pei-x86_64.c: Likewise. * peicode.h: Likewise. * ppcboot.c: Likewise. * reloc.c: Likewise. * sparclinux.c: Likewise. * srec.c: Likewise. * stabs.c: Likewise. * vms-alpha.c: Likewise. * vms-lib.c: Likewise. * xcofflink.c: Likewise.	2016-10-19 14:37:21 +01:00
Alan Modra	2b80414579	-Wimplicit-fallthrough error fixes ... Well, not all are errors, but a little more substantive than just fiddling with comments. bfd/ * coffcode.h (coff_slurp_symbol_table): Revert accidental commit made 2015-01-08. * elf32-nds32.c (nds32_elf_grok_psinfo): Add missing break. * reloc.c (bfd_default_reloc_type_lookup): Add missing breaks. opcodes/ * arc-ext.c (create_map): Add missing break. * msp430-decode.opc (encode_as): Likewise. * msp430-decode.c: Regenerate. binutils/ * coffdump.c (dump_coff_where): Add missing break. * stabs.c (stab_xcoff_builtin_type): Likewise. gas/ * config/tc-arc.c (find_opcode_match): Add missing break. * config/tc-i960.c (get_cdisp): Likewise. * config/tc-metag.c (parse_swap, md_apply_fix): Likewise. * config/tc-mt.c (md_parse_option): Likewise. * config/tc-nds32.c (nds32_apply_fix): Likewise. * config/tc-hppa.c (pa_ip): Assert rather than testing last condition of multiple if statements. * config/tc-s390.c (s390_exp_compare): Return 0 on error. * config/tc-tic4x.c (tic4x_operand_parse): Add as_bad and break out of case rather than falling into next case. Formatting. ld/ * plugin.c (asymbol_from_plugin_symbol): Avoid compiler warning by adding return.	2016-10-06 09:39:56 +10:30
Alan Modra	4eca02287c	Remove syntactic sugar ... Now that _bfd_error_handler is not a function pointer. * aout-adobe.c: Replace (*_bfd_error_handler) (...) with _bfd_error_handler (...) throughout. * aout-cris.c, * aoutx.h, * archive.c, * bfd.c, * binary.c, * cache.c, * coff-alpha.c, * coff-arm.c, * coff-h8300.c, * coff-i860.c, * coff-mcore.c, * coff-ppc.c, * coff-rs6000.c, * coff-sh.c, * coff-tic4x.c, * coff-tic54x.c, * coff-tic80.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * coffswap.h, * cpu-arm.c, * cpu-m68k.c, * cpu-sh.c, * dwarf2.c, * ecoff.c, * elf-eh-frame.c, * elf-m10300.c, * elf.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cris.c, * elf32-crx.c, * elf32-dlx.c, * elf32-frv.c, * elf32-hppa.c, * elf32-i370.c, * elf32-i386.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-rl78.c, * elf32-s390.c, * elf32-score.c, * elf32-score7.c, * elf32-sh.c, * elf32-sh64.c, * elf32-sparc.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sh64.c, * elf64-sparc.c, * elf64-x86-64.c, * elfcode.h, * elfcore.h, * elflink.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfxx-mips.c, * elfxx-sparc.c, * elfxx-tilegx.c, * hpux-core.c, * i386linux.c, * ieee.c, * ihex.c, * libbfd.c, * linker.c, * m68klinux.c, * mach-o.c, * merge.c, * mmo.c, * oasys.c, * osf-core.c, * pdp11.c, * pe-mips.c, * peXXigen.c, * pef.c, * plugin.c, * reloc.c, * rs6000-core.c, * sco5-core.c, * som.c, * sparclinux.c, * srec.c, * stabs.c, * syms.c, * vms-alpha.c, * vms-lib.c, * vms-misc.c, * xcofflink.c: Likewise.	2016-09-30 15:17:44 +09:30