When not stripping those sections, there was a bug where gold was incorrectly
adjusting section-relative offsets by the offset of the input section within
the output section. That adjustment was both unnecessary and wrong, causing
gold to miss a number of debug entries that should have been added to
.gdb_index. (With stripping, the adjustment was always 0, so the bug in
dwarf_reader.cc would have been hidden by the change to layout.cc.)
gold/
* dwarf_reader.h (Dwarf_pubnames_table): Remove output_section_offset_.
* dwarf_reader.cc (Dwarf_pubnames_table::read_section): Likewise.
(Dwarf_pubnames_table::read_header): Likewise.
* layout.cc (gdb_fast_lookup_sections): Add .debug_gnu_pubnames and
.debug_gnu_pubtypes.
2014-04-15 Sasa Stankovic <Sasa.Stankovic@imgtec.com>
gold/
* layout.cc (Layout::include_section): Allow a target to decide
whether to include a section.
* target.h (Target::should_include_section): New function.
(Target::do_should_include_section): New function.
* output.cc (Output_segment::set_section_addresses): Take new
Target* argument. If target->isolate_execinstr() and the segment
is executable and starts at a target->abi_pagesize() boundary,
pad its end out to a target->abi_pagesize() boundary with code fill.
* output.h (Output_segment::set_section_addresses): Update decl.
* layout.h (Layout::check_output_data_for_reset_values): Take new
argument RELAX_OUTPUTS.
(Layout): New member relax_output_list_.
(Layout::add_relax_output): New method.
* layout.cc (Layout::Layout): Update constructor.
(Layout::reset_relax_output): New method.
(Layout::clean_up_after_relaxation): Call it.
(Layout::prepare_for_relaxation): Update caller.
(Layout::set_segment_offsets): Update callers of set_section_addresses.
Call reset_relax_output before re-processing segments for
isolate_execinstr case.
(Layout::write_data): Handle relax_output_list_.
(Layout::Relaxation_debug_check::check_output_data_for_reset_values):
Take new argument RELAX_OUTPUTS. Assert it's an empty collection.
* options.h (General_options): Add -Trodata-segment option.
* parameters.cc (Parameters::check_rodata_segment): New function.
(Parameters::set_target_once): Call it.
* parameters.h (Parameters): Declare it (private member function).
* layout.cc (load_seg_unusable_for_headers): New function, broken
out of Layout::relaxation_loop_body. If TARGET->isolate_execinstr()
then validate rodata segment rather than text segment.
(relaxation_loop_body): Call that.
(is_text_segment): New function. Don't admit a non-executable
segment if TARGET->isolate_execinstr().
(set_segment_offsets): Call it. Honor -Trodata-segment option.
gold/
* layout.cc (Layout::set_segment_offsets): Taking care of the case when
the maximum segment alignment is larger than the page size.
* testsuite/Makefile.am (large_symbol_alignment): Test that Gold
correctly aligns the symbols with large alignemnt.
* testsuite/Makefile.in: Regenerate.
* testsuite/large_symbol_alignment.cc: New file.
Sriraman Tallam <tmsriram@google.com>
* options.h (sort_section): New option.
* output.h (Input_section_sort_section_prefix_special_ordering_compare):
Rename from Input_section_sort_section_name_special_ordering_compare.
(Input_section_sort_section_name_compare): New struct.
* output.cc (Output_section::Input_section_sort_section_name_compare::
operator()): New function.
(Output_section::sort_attached_input_sections): Use new sort function
for .text if --sort-section=name is specified.
* layout.cc (Layout::make_output_section):
Add sorting by name when --sort-section=name is specified.
* testsuite/Makefile.am (text_section_grouping): Test option
--sort-section=name.
* testsuite/Makefile.in: Regenerate.
* testsuite/section_sorting_name.cc: New file.
* testsuite/section_sorting_name.sh: New file.
PR ld/15365
* layout.cc (Layout::finalize): Make __ehdr_start STV_HIDDEN.
ld/
PR ld/15365
* emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation):
Restrict __ehdr_start's export class to no less than STV_HIDDEN.
ld/testsuite/
PR ld/15365
* ld-elf/ehdr_start.d: Expect __ehdr_start to be STB_LOCAL.
* ld-mips-elf/ehdr_start-1.nd: New test.
* ld-mips-elf/ehdr_start-2.nd: New test.
* ld-mips-elf/ehdr_start-1.ld: New test linker script.
* ld-mips-elf/ehdr_start-2.ld: New test linker script.
* ld-mips-elf/ehdr_start-new.s: New test source.
* ld-mips-elf/ehdr_start-o32.s: New test source.
* ld-mips-elf/mips-elf.exp: Run the new tests.
gold/
* gold.cc (queue_final_tasks): invoke layout->queue_build_id_tasks().
* layout.cc (Hash_task): New class.
(Layout::queue_build_id_tasks): New function.
(Layout::write_build_id): Handle single-thread portion of build ID
computation. (In some cases, all of it is single-threaded.) Replace
{sha1,md5}_process_bytes with {sha1,md5}_buffer to get the same
functionality in fewer lines of code.
* layout.h (Layout::queue_build_id_tasks): New function declaration.
* options.h (General_options): make "--build-id" default to tree
rather than sha1. Add two new options related to --build-id=tree:
--build-id-chunk-size-for-treehash and
--build-id-min-file-size-for-treehash.
* Makefile.am: add testing of --build-id=tree and related new options
(these tests will be invoked by "make check").
* Makefile.in: Regenerate.
2013-01-24 Sriraman Tallam <tmsriram@google.com>
* layout.cc (Layout::layout): Check for option text_reorder.
(Layout::make_output_section): Ditto.
* options.h (text_reorder): New option.
* output.cc (Input_section_sort_compare): Remove special ordering
of section names.
(Output_section::
Input_section_sort_section_name_special_ordering_compare::
operator()): New function.
(Output_section::sort_attached_input_sections): Use new sort function
for .text.
* output.h (Input_section_sort_section_name_special_ordering_compare):
New struct.
* testsuite/Makefile.am (text_section_grouping): Test option
--no-text-reorder
* testsuite/Makefile.in: Regenerate.
* testsuite/text_section_grouping.sh: Check order of functions without
default text reordering.
The "new" dtags options have been around for 14+ years, so there
shouldn't be a need to generate both new & old tags anymore.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* layout.cc (Layout::layout): Do not do default sorting for
text sections when section ordering is specified.
(make_output_section): Ditto.
* testsuite/plugin_final_layout.cc: Name the function sections
to catch reordering issues.
function.
(Layout::layout): If input section requires special ordering, must
sort input sections.
(Layout::make_output_section): May sort .text input sections.
(Layout::is_section_name_prefix_grouped): Remove.
* layout.h (class Layout): Declare
special_ordering_of_input_section. Don't declare
is_section_name_prefix_grouped.
* output.cc (Output_section::add_input_section): Revert last
change.
(Output_section::Input_section_sort::match_file_name): Don't crash
if called on output section data.
(Output_section::Input_section_sort_compare): Sort based on
special ordering.
(Output_section::Input_section_sort_section_order_index_compare):
Revert last patch.
(Output_section::sort_attached_input_sections): Likewise.
by default.
2012-12-18 Sriraman Tallam <tmsriram@google.com>
* layout.cc (Layout::is_section_name_prefix_grouped): New function.
* layout.h (Layout::is_section_name_prefix_grouped): New function.
* output.cc (Output_section::add_input_section): Check if section
name contains special prefix. Keep input sections to sort such
sections.
(Output_section::Input_section_sort_section_order_index_compare
::operator()): Group sections according to prefixes.
* (Output_section::sort_attached_input_sections): Add condition
to Input_section_entry constructor call.
* testsuite/Makefile.am (text_section_grouping): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/text_section_grouping.cc: New file.
* testsuite/text_section_grouping.sh: New file.
* layout.cc (Layout::get_executable_sections): New function.
* arm.cc (Target_arm::group_sections): Use it.
(Arm_output_section::group_sections): Delete now redundant test.
* output.cc (Output_reloc::Output_reloc): Add is_relative.
param to handle relative relocs.
* output.h (Output_reloc::Output_reloc <absolute reloc>): Likewise.
(Output_data_reloc::add_absolute): Adjust.
(Output_data_reloc::add_relative): New function.
(Output_data::reset_data_size): New function.
(Output_relaxed_input_section::set_relobj, set_shndx): New functions.
(Output_section::set_addralign): New function.
(Output_section::checkpoint_set_addralign): New function.
(Output_section::clear_section_offsets_need_adjustment): New function.
(Output_section::input_sections): Make public.
* powerpc.cc (class Output_data_brlt_powerpc): New.
(class Stub_table, class Stub_control): New.
(Powerpc_relobj::has14_, set_has_14bit_branch, has_14bit_branch,
stub_table_, set_stub_table, stub_table): New vectors and accessor
functions.
(Target_powerpc::do_may_relax, do_relax, push_branch,
new_stub_table, stub_tables, brlt_section, group_sections,
add_branch_lookup_table, find_branch_lookup_table,
write_branch_lookup_table, make_brlt_section): New functions.
(Target_powerpc::struct Sort_sections, class Branch_info): New.
(Target_powerpc::brlt_section_, stub_tables_, branch_lookup_table_,
branch_info_): New vars.
(Target_powerpc::make_plt_entry, make_local_ifunc_plt_entry): Don't
make call stubs here.
(Output_data_glink): Remove all call stub handling from this class.
(Target_powerpc::Scan::local, global): Save interesting branch
relocs and relocs for ifunc. Adjust calls to plt entry functions.
(Target_powerpc::do_finalize_sections): Only make reg save/restore
functions on final link.
(Target_powerpc::Relocate::relocate): Adjust lookup of call stubs.
Handle long branch destinations too.
(Target_powerpc::do_dynsym_value, do_plt_address_for_global,
do_plt_address_for_local): Adjust lookup of plt call stubs.
* layout.cc (Layout::set_segment_offsets): When using
common-page-size alignment, ensure we are on a new max-page-size
page.
* output.cc (Output_segment::set_section_addresses): Use
abi_pagesize, not common_pagesize for relro boundary.
(Output_segment::set_offset): Likewise.
segments.
2012-08-24 Sriraman Tallam <tmsriram@google.com>
* gold.cc (queue_middle_tasks): Call layout again when unique
segments for sections is desired.
* layout.cc (Layout::Layout): Initialize new members.
(Layout::get_output_section_flags): New function.
(Layout::choose_output_section): Call get_output_section_flags.
(Layout::layout): Make output section for mapping to a unique segment.
(Layout::insert_section_segment_map): New function.
(Layout::attach_allocated_section_to_segment): Make unique segment for
output sections marked so.
(Layout::segment_precedes): Check for unique segments when sorting.
* layout.h (Layout::Unique_segment_info): New struct.
(Layout::Section_segment_map): New typedef.
(Layout::insert_section_segment_map): New function.
(Layout::get_output_section_flags): New function.
(Layout::is_unique_segment_for_sections_specified): New function.
(Layout::set_unique_segment_for_sections_specified): New function.
(Layout::unique_segment_for_sections_specified_): New member.
(Layout::section_segment_map_): New member.
* object.cc (Sized_relobj_file<size, big_endian>::do_layout):
Rename is_gc_pass_one to is_pass_one.
Rename is_gc_pass_two to is_pass_two.
Rename is_gc_or_icf to is_two_pass.
Check for which pass based on whether symbols data is present.
Make it two pass when unique segments for sections is desired.
* output.cc (Output_section::Output_section): Initialize new
members.
* output.h (Output_section::is_unique_segment): New function.
(Output_section::set_is_unique_segment): New function.
(Output_section::is_unique_segment_): New member.
(Output_section::extra_segment_flags): New function.
(Output_section::set_extra_segment_flags): New function.
(Output_section::extra_segment_flags_): New member.
(Output_section::segment_alignment): New function.
(Output_section::set_segment_alignment): New function.
(Output_section::segment_alignment_): New member.
(Output_segment::Output_segment): Initialize is_unique_segment_.
(Output_segment::is_unique_segment): New function.
(Output_segment::set_is_unique_segment): New function.
(Output_segment::is_unique_segment_): New member.
* plugin.cc (allow_unique_segment_for_sections): New function.
(unique_segment_for_sections): New function.
(Plugin::load): Add new functions to transfer vector.
* Makefile.am (plugin_final_layout.readelf.stdout): Add readelf output.
* Makefile.in: Regenerate.
* testsuite/plugin_final_layout.sh: Check if unique segment
functionality works.
* testsuite/plugin_section_order.c (onload): Check if new interfaces
are available.
(allow_unique_segment_for_sections): New global.
(unique_segment_for_sections): New global.
(claim_file_hook): Call allow_unique_segment_for_sections.
(all_symbols_read_hook): Call unique_segment_for_sections.
2012-08-24 Sriraman Tallam <tmsriram@google.com>
* plugin-api.h (ld_plugin_allow_unique_segment_for_sections):
New interface.
(ld_plugin_unique_segment_for_sections): New interface.
(LDPT_ALLOW_UNIQUE_SEGMENT_FOR_SECTIONS): New enum val.
(LDPT_UNIQUE_SEGMENT_FOR_SECTIONS): New enum val.
(tv_allow_unique_segment_for_sections): New member.
(tv_unique_segment_for_sections): New member.
* script-sections.cc (Sections_element::output_section_name): Add
keep return parameter.
(Output_section_element::match_name): Add keep return parameter.
Return the value of the keep_ member.
* script-sections.h (class Output_section): Update
output_section_name prototype.
* layout.cc (Layout::keep_input_section): New public member
function.
(Layout::choose_output_section): Pass keep parameter to
output_section_name.
* layout.h (class Layout): Add keep_input_section.
* object.cc (Sized_relobj_file::do_layout): Check for kept input
sections.
* testsuite/Makefile.am: Add a test.
* testsuite/Makefile.in: Regenerate.
* testsuite/pr14265.c: Source file for the test.
* testsuite/pr14265.t: Linker script for the test.
* testsuite/pr14265.sh: Shell script for the test.
* ld-gc/gc.exp: Add a new test.
* ld-gc/pr14265.c: Source file for the new test.
* ld-gc/pr14265.t: Linker script for the new test.
* ld-gc/pr14265.d: Expected symbol dump.
(Target::do_output_section_name): New function.
* layout.cc (Layout::choose_output_section): Call the above.
* powerpc.cc (Target_powerpc::do_output_section_name): New function.
* layout.cc (gdb_sections): Remove ".debug_" prefixes,
add .debug_macro.
(lines_only_debug_sections): Likewise.
(gdb_fast_lookup_sections): New static array.
(is_gdb_debug_section): Rename formal parameter.
(is_lines_only_debug_section): Likewise.
(is_gdb_fast_lookup_section): New function.
(Layout::include_section): Check for ".zdebug_" prefix; pass
section name suffix to is_gdb_debug_section, et al.; check for
fast-lookup sections when building .gdb_index.
* options.h (--strip-debug-gdb): Update GDB version number.
* layout.cc (Layout::section_name_mapping): Add rules to handle
exact match on .data.rel.ro.local or .data.rel.ro.
(Layout::output_section_name): Check for exact matches.
* configure: Regenerate.
gold/
* nacl.cc: New file.
* nacl.h: New file.
* Makefile.am (CCFILES, HFILES): Add them.
* Makefile.in: Regenerate.
* i386.cc (Output_data_plt_i386_nacl): New class.
(Output_data_plt_i386_nacl_exec): New class.
(Output_data_plt_i386_nacl_dyn): New class.
(Target_i386_nacl): New class.
(Target_selector_i386_nacl): New class.
(target_selector_i386): Use it instead of Target_selector_i386.
* x86_64.cc (Output_data_plt_x86_64_nacl): New class.
(Target_x86_64_nacl): New class.
(Target_selector_x86_64_nacl): New class.
(target_selector_x86_64, target_selector_x32): Use it instead of
Target_selector_x86_64.
* arm.cc (Output_data_plt_arm_nacl): New class.
(Target_arm_nacl): New class.
(Target_selector_arm_nacl): New class.
(target_selector_arm, target_selector_armbe): Use it instead of
Target_selector_arm.
* target-select.cc (select_target): Take new Input_file* and off_t
arguments, pass them on to recognize method of selector.
* object.cc (make_elf_sized_object): Update caller.
* parameters.cc (parameters_force_valid_target): Likewise.
* incremental.cc (make_sized_incremental_binary): Likewise.
* target-select.h: Update decl.
(Target_selector::recognize): Take new Input_file* argument,
pass it on to do_recognize.
(Target_selector::do_recognize): Take new Input_file* argument.
* freebsd.h (Target_selector_freebsd::do_recognize): Likewise.
* powerpc.cc (Target_selector_powerpc::do_recognize): Likewise.
* sparc.cc (Target_selector_sparc::do_recognize): Likewise.
* testsuite/testfile.cc (Target_selector::do_recognize): Likewise.
* target.h (Target::Target_info): New members isolate_execinstr
and rosegment_gap.
(Target::isolate_execinstr, Target::rosegment_gap): New methods.
* arm.cc (Target_arm::arm_info): Update initializer.
* i386.cc (Target_i386::i386_info): Likewise.
* powerpc.cc (Target_powerpc::powerpc_info): Likewise.
* sparc.cc (Target_sparc::sparc_info): Likewise.
* x86_64.cc (Target_x86_64::x86_64_info): Likewise.
* testsuite/testfile.cc (Target_test::test_target_info): Likewise.
* layout.cc (Layout::attach_allocated_section_to_segment):
Take new const Target* argument. If target->isolate_execinstr(), act
like --rosegment.
(Layout::find_first_load_seg): Take new const Target* argument;
if target->isolate_execinstr(), reject PF_X segments.
(Layout::relaxation_loop_body): Update caller.
(Layout::set_segment_offsets): If target->isolate_execinstr(),
reset file offset to zero when we hit LOAD_SEG, and then do a second
loop over the segments before LOAD_SEG to reassign offsets after
addresses have been determined. Handle target->rosegment_gap().
(Layout::attach_section_to_segment): Take new const Target* argument;
pass it to attach_allocated_section_to_segment.
(Layout::make_output_section): Update caller.
(Layout::attach_sections_to_segments): Take new const Target* argument;
pass it to attach_section_to_segment.
* gold.cc (queue_middle_tasks): Update caller.
* layout.h (Layout): Update method decls with new arguments.
* arm.cc (Target_arm::Target_arm): Take optional argument for the
Target_info pointer to use.
(Target_arm::do_make_data_plt): New virtual method.
(Target_arm::make_data_plt): New method that calls it.
(Target_arm::make_plt_entry): Use it.
(Output_data_plt_arm::Output_data_plt_arm): Take additional argument
for the section alignment.
(Output_data_plt_arm::do_first_plt_entry_offset): New abstract virtual
method.
(Output_data_plt_arm::first_plt_entry_offset): Call it.
(Output_data_plt_arm::do_get_plt_entry_size): New abstract virtual
method.
(Output_data_plt_arm::get_plt_entry_size): Call it.
(Output_data_plt_arm::do_fill_plt_entry): New abstract virtual method.
(Output_data_plt_arm::fill_plt_entry): New method that calls it.
(Output_data_plt_arm::do_fill_first_plt_entry): New abstract virtual
method.
(Output_data_plt_arm::fill_first_plt_entry): New method that calls it.
(Output_data_plt_arm::set_final_data_size): Use get_plt_entry_size
method instead of sizeof(plt_entry).
(Output_data_plt_arm::add_entry): Likewise.
Use first_plt_entry_offset method instead of sizeof(first_plt_entry).
(Target_arm::first_plt_entry_offset): Call method on this->plt_ rather
than static method.
(Target_arm::plt_entry_size): Likewise.
(Output_data_plt_arm::first_plt_entry, Output_data_plt_arm::plt_entry):
Move to ...
(Output_data_plt_arm_standard): ... here, new class.
(Output_data_plt_arm::do_write): Move guts of PLT filling to...
(Output_data_plt_arm_standard::do_fill_first_plt_entry): ... here ...
(Output_data_plt_arm_standard::do_fill_plt_entry): ... and here.
* x86_64.cc (Output_data_plt_x86_64::Output_data_plt_x86_64):
Take additional argument for the PLT entry size.
(Output_data_plt_x86_64::get_tlsdesc_plt_offset):
Use get_plt_entry_size method rather than plt_entry_size variable.
(Output_data_plt_x86_64::reserve_slot): Likewise.
(Output_data_plt_x86_64::do_adjust_output_section): Likewise.
(Output_data_plt_x86_64::add_entry): Likewise.
(Output_data_plt_x86_64::add_local_ifunc_entry): Likewise.
(Output_data_plt_x86_64::address_for_global): Likewise.
(Output_data_plt_x86_64::address_for_local): Likewise.
(Output_data_plt_x86_64::set_final_data_size): Likewise.
(Output_data_plt_x86_64::first_plt_entry_offset): Likewise.
Make method non-static.
(Output_data_plt_x86_64::do_get_plt_entry_size): New abstract virtual
method.
(Output_data_plt_x86_64::get_plt_entry_size): Just call that.
(Output_data_plt_x86_64::do_add_eh_frame): New abstract virtual method.
(Output_data_plt_x86_64::add_eh_frame): New method to call it.
(Output_data_plt_x86_64::do_fill_first_plt_entry): New abstract
virtual method.
(Output_data_plt_x86_64::fill_first_plt_entry): New method to call it.
(Output_data_plt_x86_64::do_fill_plt_entry): New abstract
virtual method.
(Output_data_plt_x86_64::fill_plt_entry): New method to call it.
(Output_data_plt_x86_64::do_fill_tlsdesc_entry): New abstract
virtual method.
(Output_data_plt_x86_64::fill_tlsdesc_entry): New method to call it.
(Output_data_plt_x86_64::plt_entry_size)
(Output_data_plt_x86_64::first_plt_entry)
(Output_data_plt_x86_64::plt_entry)
(Output_data_plt_x86_64::tlsdesc_plt_entry)
(Output_data_plt_x86_64::plt_eh_frame_fde_size)
(Output_data_plt_x86_64::plt_eh_frame_fde): Move to ...
(Output_data_plt_x86_64_standard): ... here, new class.
(Target_x86_64::Target_x86_64): Take optional argument for the
Target_info pointer to use.
(Target_x86_64::do_make_data_plt): New virtual method.
(Target_x86_64::make_data_plt): New method to call it.
(Target_x86_64::init_got_plt_for_update): Use that.
Call this->plt_->add_eh_frame method here.
(Output_data_plt_x86_64::init): Don't do add_eh_frame_for_plt here.
(Target_x86_64::first_plt_entry_offset): Call method on this->plt_
rather than static method.
(Target_x86_64::plt_entry_size): Likewise.
(Output_data_plt_x86_64::do_write): Use get_plt_entry_size method
rather than plt_entry_size variable. Move guts of PLT filling to...
(Output_data_plt_x86_64_standard::do_fill_first_plt_entry): ... here ...
(Output_data_plt_x86_64_standard::do_fill_plt_entry): ... and here ...
(Output_data_plt_x86_64_standard::do_fill_tlsdesc_entry): ... and here.
* i386.cc (Output_data_plt_i386::Output_data_plt_i386): Take
additional argument for the section alignment.
Don't do add_eh_frame_for_plt here.
(Output_data_plt_i386::first_plt_entry_offset): Make the method
non-static. Use get_plt_entry_size method rather than plt_entry_size
variable.
(Output_data_plt_i386::do_get_plt_entry_size): New abstract virtual
method.
(Output_data_plt_i386::get_plt_entry_size): Call it.
(Output_data_plt_i386::do_add_eh_frame): New abstract virtual method.
(Output_data_plt_i386::add_eh_frame): New method to call it.
(Output_data_plt_i386::do_fill_first_plt_entry): New abstract virtual
method.
(Output_data_plt_i386::fill_first_plt_entry): New method to call it.
(Output_data_plt_i386::do_fill_plt_entry): New abstract virtual
method.
(Output_data_plt_i386::fill_plt_entry): New method to call it.
(Output_data_plt_i386::set_final_data_size): Use get_plt_entry_size
method instead of plt_entry_size.
(Output_data_plt_i386::plt_entry_size)
(Output_data_plt_i386::plt_eh_frame_fde_size)
(Output_data_plt_i386::plt_eh_frame_fde): Move to ...
(Output_data_plt_i386_standard): ... here, new class.
(Output_data_plt_i386_exec): New class.
(Output_data_plt_i386::exec_first_plt_entry): Move to ...
(Output_data_plt_i386_exec::first_plt_entry): ... here.
(Output_data_plt_i386::exec_plt_entry): Move to ...
(Output_data_plt_i386_exec::plt_entry): ... here.
(Output_data_plt_i386_dyn): New class.
(Output_data_plt_i386::first_plt_entry): Move to ...
(Output_data_plt_i386_dyn::first_plt_entry): ... here.
(Output_data_plt_i386::dyn_plt_entry): Move to ...
(Output_data_plt_i386_dyn::plt_entry): ... here.
(Target_i386::Target_i386): Take optional argument for the Target_info
pointer to use.
(Target_i386::do_make_data_plt): New virtual method.
(Target_i386::make_data_plt): New method to call it.
(Target_i386::make_plt_section): Use that.
Call this->plt_->add_eh_frame method here.
(Output_data_plt_i386::add_entry): Use get_plt_entry_size method
rather than plt_entry_size variable.
(Output_data_plt_i386::add_local_ifunc_entry): Likewise.
(Output_data_plt_i386::address_for_local): Likewise.
(Output_data_plt_i386::do_write): Likewise.
Move guts of PLT filling to...
(Output_data_plt_i386_exec::do_fill_first_plt_entry): ... here ...
(Output_data_plt_i386_exec::do_fill_plt_entry): ... and here ...
(Output_data_plt_i386_dyn::do_fill_first_plt_entry): ... and here ...
(Output_data_plt_i386_dyn::do_fill_plt_entry): ... and here.
Change-Id: Id24b95600489835ff5e860a39c147203d4380c2b
* Makefile.am: Add gdb-index.cc, gdb-index.h.
* Makefile.in: Regenerate.
* dwarf_reader.cc (Sized_elf_reloc_mapper::do_initialize): New function.
(Sized_elf_reloc_mapper::symbol_section): New function.
(Sized_elf_reloc_mapper::do_get_reloc_target): New function.
(make_elf_reloc_mapper): New function.
(Dwarf_abbrev_table::clear_abbrev_codes): New function.
(Dwarf_abbrev_table::do_read_abbrevs): New function.
(Dwarf_abbrev_table::do_get_abbrev): New function.
(Dwarf_ranges_table::read_ranges_table): New function.
(Dwarf_ranges_table::read_range_list): New function.
(Dwarf_pubnames_table::read_section): New function.
(Dwarf_pubnames_table::read_header): New function.
(Dwarf_pubnames_table::next_name): New function.
(Dwarf_die::Dwarf_die): New function.
(Dwarf_die::read_attributes): New function.
(Dwarf_die::skip_attributes): New function.
(Dwarf_die::set_name): New function.
(Dwarf_die::set_linkage_name): New function.
(Dwarf_die::attribute): New function.
(Dwarf_die::string_attribute): New function.
(Dwarf_die::int_attribute): New function.
(Dwarf_die::uint_attribute): New function.
(Dwarf_die::ref_attribute): New function.
(Dwarf_die::child_offset): New function.
(Dwarf_die::sibling_offset): New function.
(Dwarf_info_reader::check_buffer): New function.
(Dwarf_info_reader::parse): New function.
(Dwarf_info_reader::do_parse): New function.
(Dwarf_info_reader::do_read_string_table): New function.
(Dwarf_info_reader::lookup_reloc): New function.
(Dwarf_info_reader::get_string): New function.
(Dwarf_info_reader::visit_compilation_unit): New function.
(Dwarf_info_reader::visit_type_unit): New function.
(Sized_dwarf_line_info::Sized_dwarf_line_info): Use
Sized_elf_reloc_mapper.
(Sized_dwarf_line_info::symbol_section): Remove function.
(Sized_dwarf_line_info::read_relocs): Use Sized_elf_reloc_mapper.
(Sized_dwarf_line_info::read_line_mappings): Remove object
parameter, adjust callers.
(Sized_dwarf_line_info::format_file_lineno): Fix type of cast.
* dwarf_reader.h: Include <sys/types.h>.
(class Track_relocs): Remove forward declaration.
(class Elf_reloc_mapper): New class.
(class Sized_elf_reloc_mapper): New class.
(class Dwarf_abbrev_table): New class.
(class Dwarf_range_list): New class.
(class Dwarf_ranges_table): New class.
(class Dwarf_pubnames_table): New class.
(class Dwarf_die): New class.
(class Dwarf_info_reader): New class.
(Sized_dwarf_line_info::read_line_mappings): Remove object parameter.
(Sized_dwarf_line_info::symbol_section): Remove member function.
* dynobj.h (Sized_dynobj::do_section_contents): Refactor code from
base class.
* gdb-index.cc: New source file.
* gdb-index.h: New source file.
* incremental.cc (Sized_relobj_incr::do_layout): Track .debug_info
and .debug_types sections, call Layout::add_to_gdb_index.
(Sized_relobj_incr::do_section_name): Implement.
(Sized_relobj_incr::do_section_contents): Adjust parameter list and
return type; Implement.
(Sized_incr_dynobj::do_section_contents): Adjust parameter list and
return type.
* incremental.h (Sized_relobj_incr::do_section_contents): Adjust
parameter list and return type.
(Sized_incr_dynobj::do_section_contents): Likewise.
* layout.cc: Include gdb-index.h.
(Layout::Layout): Initialize gdb_index_data_.
(Layout::init_fixed_output_section): Check for .gdb_index section.
(Layout::add_to_gdb_index): New function. Instantiate.
* layout.h: Add forward declaration for class Gdb_index.
(Layout::add_to_gdb_index): New member function.
(Layout::gdb_index_data_): New data member.
* main.cc: Include gdb-index.h.
(main): Print statistics for gdb index.
* object.cc (Object::section_contents): Move code into
do_section_contents.
(need_decompressed_section): Check for sections needed when building
gdb index.
(build_compressed_section_map): Likewise.
(Sized_relobj_file::do_read_symbols): Need local symbols when building
gdb index.
(Sized_relobj_file::do_layout): Track .debug_info and .debug_types
sections; call Layout::add_to_gdb_index.
(Sized_relobj_file::do_decompressed_section_contents): Call
do_section_contents directly.
* object.h (Object::do_section_contents): Adjust parameter list and
return type.
(Object::do_decompressed_section_contents): Call do_section_contents
directly.
(Sized_relobj_file::do_section_contents): Adjust parameter list and
return type.
* options.h (class General_options): Add --gdb-index option.
* plugin.cc (Sized_pluginobj::do_section_contents): Adjust parameter
list and return type.
* plugin.h (Sized_pluginobj::do_section_contents): Likewise.
* reloc.h (Track_relocs::checkpoint): New function.
(Track_relocs::reset): New function.
* testsuite/Makefile.am (gdb_index_test_1.sh, gdb_index_test_2.sh):
New test cases.
* testsuite/Makefile.in: Regenerate.
* testsuite/gdb_index_test.cc: New test source file.
* testsuite/gdb_index_test_1.sh: New test source file.
* testsuite/gdb_index_test_2.sh: New test source file.
* layout.cc (Layout::segment_precedes): Don't assert failure if a
--section-start option was seen.
* options.h (General_options::any_section_start): New function.
* layout.h (section_order_map_): New member.
(get_section_order_map): New member function.
* output.cc (Output_section::add_input_section): Check for patterns
only when --section-ordering-file is specified.
* gold.cc (queue_middle_tasks): Delay updating order of sections till
output_sections have been formed.
* layout.cc (Layout_Layout): Initialize section_order_map_.
* plugin.cc (update_section_order): Store order in order_map. Do not
update the order.
* testsuite/Makefile.am: Add test case for plugin_final_layout.
* testsuite/Makefile.in: Regenerate.
* testsuite/plugin_section_order.c: New file.
* testsuite/plugin_final_layout.cc: New file.
* testsuite/plugin_final_layout.sh: New file.
remaining hole size when allocating.
(Layout::make_output_section): Set fill methods for debug sections.
* layout.h (Free_list::Free_list_node): Move from private to
public.
(Free_list::set_min_hole_size): New function.
(Free_list::begin, Free_list::end): New functions.
(Free_list::min_hole_): New data member.
* output.cc: Include dwarf.h.
(Output_fill_debug_info::do_minimum_hole_size): New function.
(Output_fill_debug_info::do_write): New function.
(Output_fill_debug_line::do_minimum_hole_size): New function.
(Output_fill_debug_line::do_write): New function.
(Output_section::Output_section): Initialize new data member.
(Output_section::set_final_data_size): Ensure patch space is larger
than minimum hole size.
(Output_section::do_write): Fill holes in debug sections.
* output.h (Output_fill): New class.
(Output_fill_debug_info): New class.
(Output_fill_debug_line): New class.
(Output_section::set_free_space_fill): New function.
(Output_section::free_space_fill_): New data member.
* testsuite/Makefile.am (incremental_test_3): Add
--incremental-patch option.
(incremental_test_4): Likewise.
(incremental_test_5): Likewise.
(incremental_test_6): Likewise.
(incremental_copy_test): Likewise.
(incremental_common_test_1): Likewise.
* testsuite/Makefile.in: Regenerate.
segment if -Ttext was specified.
* object.cc (Sized_relobj_file::Sized_relobj_file): Store the ELF
file type.
* object.h (Sized_relobj_file::e_type): New function.
(Sized_relobj_file::e_type_): New data member.
* symtab.cc (Symbol_table::add_from_relobj): Don't add section
base address for ET_EXEC files.
* target.cc (Target::do_make_elf_object_implementation): Allow
ET_EXEC files with --just-symbols option.
the -Ttext option is not 0 modulo the page size. If we clear
load_seg, clear phdr_seg too.
* testsuite/Makefile.am (check_PROGRAMS): Add flagstest_o_ttext_1.
(flagstest_o_ttext_1): New target.
(check_DATA): Add flagstest_o_ttext_2.
(flagstest_o_ttext_2): New target.
* testsuite/Makefile.in: Rebuild.
* plugin-api.h
(ld_plugin_section): New struct.
(ld_plugin_get_section_count): New typedef.
(ld_plugin_get_section_type): New typedef.
(ld_plugin_get_section_name): New typedef.
(ld_plugin_get_section_contents): New typedef.
(ld_plugin_update_section_order): New typedef.
(ld_plugin_allow_section_ordering): New typedef.
(LDPT_GET_SECTION_COUNT): New enum value.
(LDPT_GET_SECTION_TYPE): New enum value.
(LDPT_GET_SECTION_NAME): New enum value.
(LDPT_GET_SECTION_CONTENTS): New enum value.
(LDPT_UPDATE_SECTION_ORDER): New enum value.
(LDPT_ALLOW_SECTION_ORDERING): New enum value.
(tv_get_section_count): New struct members.
(tv_get_section_type): New struct members.
(tv_get_section_name): New struct members.
(tv_get_section_contents): New struct members.
(tv_update_section_order): New struct members.
(tv_allow_section_ordering): New struct members.
* archive.cc (Archive::get_elf_object_for_member): Add extra parameter
to claim_file call.
* layout.cc (Layout::Layout): Initialize section_ordering_specified_,
input_section_position_, and input_section_glob_.
(read_layout_from_file): Call function section_ordering_specified.
* layout.h (is_section_ordering_specified): New function.
(section_ordering_specified): New function.
(section_ordering_specified_): New boolean member.
* main.cc(main): Call load_plugins after layout object is defined.
* output.cc (Output_section::add_input_section): Use
function section_ordering_specified to check if section ordering is
needed.
* output.cc (Output_section::add_relaxed_input_section): Use
function section_ordering_specified to check if section ordering is
needed.
(Output_section::update_section_layout): New function.
(Output_section::sort_attached_input_sections): Check if input section
must be reordered.
* output.h (Output_section::update_section_layout): New function.
* plugin.cc (get_section_count): New function.
(get_section_type): New function.
(get_section_name): New function.
(get_section_contents): New function.
(update_section_order): New function.
(allow_section_ordering): New function.
(Plugin::load): Add the new interfaces to the transfer vector.
(Plugin_manager::load_plugins): New parameter.
(Plugin_manager::all_symbols_read): New parameter.
(Plugin_manager::claim_file): New parameter. Save the elf object for
unclaimed objects.
(Plugin_manager::get_elf_object): New function.
(Plugin_manager::get_view): Change to directly use the bool to check
if get_view is called from claim_file_hook.
* plugin.h (input_objects): New function
(Plugin__manager::load_plugins): New parameter.
(Plugin_manager::claim_file): New parameter.
(Plugin_manager::get_elf_object): New function.
(Plugin_manager::in_claim_file_handler): New function.
(Plugin_manager::in_claim_file_handler_): New member.
(layout): New function.
* readsyms.cc (Read_symbols::do_read_symbols): Call the claim_file
handler with an extra parameter. Make the elf object before calling
claim_file handler.
* testsuite/plugin_test.c (get_section_count): New function pointer.
(get_section_type): New function pointer.
(get_section_name): New function pointer.
(get_section_contents): New function pointer.
(update_section_order): New function pointer.
(allow_section_ordering): New function pointer.
(onload): Check if the new interfaces exist.
* target.h (Target::plt_address_for_global): New function.
(Target::plt_address_for_local): New function.
(Target::plt_section_for_global): Remove.
(Target::plt_section_for_local): Remove.
(Target::do_plt_address_for_global): New virtual function.
(Target::do_plt_address_for_local): New virtual function.
(Target::do_plt_section_for_global): Remove.
(Target::do_plt_section_for_local): Remove.
(Target::register_global_plt_entry): Add Symbol_table and Layout
parameters.
* output.cc (Output_data_got::Got_entry::write): Use
plt_address_for_global and plt_address_for_local.
* layout.cc (Layout::add_target_dynamic_tags): Use size and
address of output section.
* i386.cc (class Output_data_plt_i386): Add irelative_rel_,
got_irelative_, and irelative_count_ fields. Update
declarations.
(Output_data_plt_i386::has_irelative_section): New function.
(Output_data_plt_i386::entry_count): Add irelative_count_.
(Output_data_plt_i386::set_final_data_size): Likewise.
(class Target_i386): Add got_irelative_ and rel_irelative_
fields. Update declarations.
(Target_i386::Target_i386): Initialize new fields.
(Target_i386::do_plt_address_for_global): New function replacing
do_plt_section_for_global.
(Target_i386::do_plt_address_for_local): New function replacing
do_plt_section_for_local.
(Target_i386::got_section): Create got_irelative_.
(Target_i386::rel_irelative_section): New function.
(Output_data_plt_i386::Output_data_plt_i386): Initialize new
fields. Don't define __rel_iplt_{start,end}.
(Output_data_plt_i386::add_entry): Add symtab and layout
parameters. Change all callers. Use different PLT and GOT for
IFUNC symbols.
(Output_data_plt_i386::add_local_ifunc_entry): Add symtab and
layout parameters. Change all callers. Use different PLT and
GOT.
(Output_data_plt_i386::rel_tls_desc): Fix formatting.
(Output_data_plt_i386::rel_irelative): New function.
(Output_data_plt_i386::address_for_global): New function.
(Output_data_plt_i386::address_for_local): New function.
(Output_data_plt_i386::do_write): Write out IRELATIVE area. Use
IRELATIVE GOT when changing IFUNC GOT entries.
(Target_i386::Scan::global): Use IRELATIVE GOT for IRELATIVE
reloc.
(Target_i386::do_finalize_sections): Create the __rel_iplt symbols
if we didn't create an IRELATIVE GOT.
(Target_i386::Relocate::relocate): Use plt_address_for_global and
plt_address_for_local.
(Target_i386::do_dynsym_value): Use plt_address_for_global.
* x86_64.cc (class Output_data_plt_x86_64): Add irelative_rel_,
got_irelative_, and irelative_count_ fields. Update
declarations.
(Output_data_plt_x86_64::Output_data_plt_x86_64) [both versions]:
Initialize new fields. Remove symtab parameter. Change all
callers.
(Output_data_plt_x86_64::get_tlsdesc_plt_offset): Add
irelative_count_.
(Output_data_plt_x86_64::has_irelative_section): New function.
(Output_data_plt_x86_64::entry_count): Add irelative_count_.
(class Target_x86_64): Add got_irelative_ and rel_irelative_
fields. Update declarations.
(Target_x86_64::Target_x86_64): Initialize new fields.
(Target_x86_64::do_plt_address_for_global): New function replacing
do_plt_section_for_global.
(Target_x86_64::do_plt_address_for_local): New function replacing
do_plt_section_for_local.
(Target_x86_64::got_section): Create got_irelative_.
(Target_x86_64::rela_irelative_section): New function.
(Output_data_plt_x86_64::init): Remove symtab parameter. Change
all callers. Don't create __rel_iplt_{start,end}.
(Output_data_plt_x86_64::add_entry): Add symtab and layout
parameters. Change all callers. Use different PLT and GOT for
IFUNC symbols.
(Output_data_plt_x86_64::add_local_ifunc_entry): Add symtab and
layout parameters. Change all callers. Use different PLT and
GOT.
(Output_data_plt_x86_64::add_relocation): Add symtab and layout
parameters. Change all callers. Use different PLT and GOT for
IFUNC symbols.
(Output_data_plt_x86_64::rela_tlsdesc): Fix formatting.
(Output_data_plt_x86_64::rela_irelative): New function.
(Output_data_plt_x86_64::address_for_global): New function.
(Output_data_plt_x86_64::address_for_local): New function.
(Output_data_plt_x86_64::set_final_data_size): Likewise.
(Output_data_plt_x86_64::do_write): Write out IRELATIVE area.
(Target_x86_64::init_got_plt_for_update): Create got_irelative_.
(Target_x86_64::register_global_plt_entry): Add symtab and layout
parameters.
(Target_x86_64::Scan::global): Use IRELATIVE GOT for IRELATIVE
reloc.
(Target_x86_64::do_finalize_sections): Create the __rela_iplt
symbols if we didn't create an IRELATIVE GOT.
(Target_x86_64::Relocate::relocate): Use plt_address_for_global and
plt_address_for_local.
(Target_x86_64::do_dynsym_value): Use plt_address_for_global.
* testsuite/ifuncvar1.c: New test file.
* testsuite/ifuncvar2.c: New test file.
* testsuite/ifuncvar3.c: New test file.
* testsuite/Makefile.am (check_PROGRAMS): Add ifuncvar.
(ifuncvar1_pic.o, ifuncvar2_pic.o, ifuncvar.so): New targets.
(ifuncvar_SOURCES, ifuncvar_DEPENDENCIES): New variables.
(ifuncvar_LDFLAGS, ifuncvar_LDADD): New variables.
* testsuite/Makefile.in: Rebuild.
