https://github.com/riscv/riscv-asm-manual/pull/61
We aleady have sext.w, so just add sext.b, sext.h, zext.b, zext.h
and zext.w. In a certain sense, zext.b is not a pseudo - It is an
alias of andi. Similarly, sext.b and sext.h are aliases of other
rvb instructions, when we enable b extension; But they are pseudos
when we just enable rvi. However, this patch does not consider the
rvb cases. Besides, zext.w is only valid in rv64.
gas/
* config/tc-riscv.c (riscv_ext): New function. Use md_assemblef
to expand the zext and sext pseudos, to give them a chance to be
expanded into c-ext instructions.
(macro): Handle M_ZEXTH, M_ZEXTW, M_SEXTB and M_SEXTH.
* testsuite/gas/riscv/ext.s: New testcase.
* testsuite/gas/riscv/ext-32.d: Likewise.
* testsuite/gas/riscv/ext-64.d: Likewise.
include/
* opcode/riscv.h (M_ZEXTH, M_ZEXTW, M_SEXTB, M_SEXTH.): Added.
opcodes/
* riscv-opc.c (riscv_opcodes): Add sext.[bh] and zext.[bhw].
bfd/
* elfxx-riscv.c (riscv_ext_dont_care_version): New function. Return
TRUE if we don't care the versions of the extensions. These extensions
are added to the subset list for special purposes, with the explicit
versions or the RISCV_UNKNOWN_VERSION versions.
(riscv_parse_add_subset): If we do care the versions of the extension,
and the versions are unknown, then report errors for the non-implicit
extensions, and return directly for the implicit one.
(riscv_arch_str1): Do not output i extension after e, and the extensions
which versions are unknown.
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Handle INSN_CLASS_ZICSR
and INSN_CLASS_ZIFENCEI.
* testsuite/gas/riscv/march-imply-i.s: New testcase.
* testsuite/gas/riscv/march-imply-i2p0-01.d: New testcase. The version
of i is less than 2.1, and zi* are supported in the chosen spec, so
enable the fence.i and csr instructions, also output the implicit zi* to
the arch string.
* testsuite/gas/riscv/march-imply-i2p0-02.d: Likewise, but the zi* are
not supported in the spec 2.2. Enable the related instructions since
i's version is less than 2.1, but do not output them.
* testsuite/gas/riscv/march-imply-i2p1-01.d: New testcase. The version
of i is 2.1, so don't add it's implicit zi*, and disable the related
instructions.
* testsuite/gas/riscv/march-imply-i2p1-01.l: Likewise.
* testsuite/gas/riscv/march-imply-i2p1-02.d: Likewise, and set the zi*
explicitly, so enable the related instructions.
* testsuite/gas/riscv/march-imply-i2p0.d: Removed.
* testsuite/gas/riscv/march-imply-i2p1.d: Removed.
include/
* opcode/riscv.h: Add INSN_CLASS_ZICSR and INSN_CLASS_ZIFENCEI.
opcodes/
* riscv-opc.c (riscv_opcodes): Control fence.i and csr instructions by
zifencei and zicsr.
For
.globl foo2
.section .data.foo,"aR"
.align 4
.type foo2, @object
.size foo2, 4
foo2:
.long 2
.globl foo1
.section .data.foo
.align 4
.type foo1, @object
.size foo1, 4
foo1:
.long 1
generate a new section if the SHF_GNU_RETAIN bit doesn't match.
* config/obj-elf.c (SEC_ASSEMBLER_SHF_MASK): New.
(get_section_by_match): Also check if SEC_ASSEMBLER_SHF_MASK of
sh_flags matches. Rename info to sh_info.
(obj_elf_change_section): Don't check previous SHF_GNU_RETAIN.
Rename info to sh_info.
(obj_elf_section): Rename info to sh_info. Set sh_flags for
SHF_GNU_RETAIN.
* config/obj-elf.h (elf_section_match): Rename info to sh_info.
Add sh_flags.
* testsuite/gas/elf/elf.exp: Run section27.
* testsuite/gas/elf/section24b.d: Updated.
* testsuite/gas/elf/section27.d: New file.
* testsuite/gas/elf/section27.s: Likewise.
We have to parse and add all arch string extensions at first, and then
start to add their implicit extensions. That means we can always add
arch string extensions at the end of the subset list, but we need to
search the right place to add their implicit extensions. For now we
follow the following rules to add the implicit extensions,
* Add zicsr and zifencei only when the i's version less than 2.1.
* Add d, f and zicsr when q is found.
* Add f and zicsr when d is found.
* Add zicsr when f is found.
Besides, we do not add the implicit extensions if they are already added
in the subset list, or we cannot find their default versions according to
the chosen ISA spec.
bfd/
* elfnn-riscv.c (riscv_merge_std_ext): Updated since
riscv_lookup_subset is changed.
* elfxx-riscv.c (riscv_ext_order): New Array used to compare the
extensions' order quickly.
(riscv_init_ext_order): New function. Init the riscv_ext_order
according to the riscv_supported_std_ext and parse_config[i].class
automatically.
(riscv_compare_subsets): New function. Similar to the strcmp, but
compare the subsets with the specific order.
(riscv_lookup_subset): Return TRUE and set `current` to the subset
if it is found. Otherwise, return FALSE and set `current` to the
place where we should insert the subset.
(riscv_add_implicit_subset): New function. Search the list first,
and then find the right place to add the implicit_subset.
(riscv_parse_add_subset): Since We have to add all arch string
extensions first, and then start to add their implicit extensions.
We can add arch string extensions in order by the original
riscv_add_subset, and then add the implicit subsets by the
riscv_add_implicit_subset. Besides, do not add the implicit
extensions if we failed to find their default versions.
(riscv_parse_std_ext): Updated.
(riscv_parse_add_implicit_subsets): New function. Add all implicit
extensions according to the arch string extensions.
(riscv_parse_subset): Call riscv_init_ext_order and
riscv_parse_add_implicit_subsets, before and after parsing the
arch string. Remove parts of the ISA conflict checking since
the implicit extensions are added.
* elfxx-riscv.h (riscv_lookup_subset): Updated.
gas/
* config/tc-riscv.c (riscv_subset_supports): Updated.
* testsuite/gas/riscv/march-imply-i2p0.d: New testcase. Need to
add the implicit zicsr and zifencei when i's version less than 2.1.
* testsuite/gas/riscv/march-imply-i2p1.d: New testcase.
* testsuite/gas/riscv/march-imply-d.d: Likewise.
* testsuite/gas/riscv/march-imply-f.d: Likewise.
* testsuite/gas/riscv/march-imply-q.d: Likewise.
* testsuite/gas/riscv/march-fail-rv32iq.l: Updated.
* testsuite/gas/riscv/march-fail-rv32id.d: Removed.
* testsuite/gas/riscv/march-fail-rv32id.l: Likewise.
* testsuite/gas/riscv/march-fail-rv64iq.d: Likewise.
* testsuite/gas/riscv/march-fail-rv64iq.l: Likewise.
Keep the riscv_add_subset to do the same thing, and use a new
function, riscv_parse_add_subset, to cover most of the things
when parsing, including find the default versions for extensions,
and check whether the versions are valid. The version 0p0 should
be an invalid version, that is the mistake I made before. This
patch clarify the version rules as follows,
* We accept any version of extensions set by users, except 0p0.
* The non-standard x extensions must be set with versions in arch string.
* If user don't set the versions, or set 0p0 for the extensions, then try
to find the supported versions according to the chosen ISA spec.
Otherwise, report errors rather than output 0p0 for them.
Besides, we use as_bad rather than as_fatal to report more errors
for assembler.
bfd/
* elfxx-riscv.c (riscv_lookup_subset): Moved to front.
(riscv_add_subset): Likewise.
(riscv_release_subset_list): Likewise.
(riscv_parse_add_subset): New function. Find and check the
versions before adding them by riscv_add_subset.
(riscv_parsing_subset_version): Remove use_default_version
and change the version type from unsigned to int. Set the
versions to RISCV_UNKNOWN_VERSION if we can not find them
in the arch string.
(riscv_parse_std_ext): Updated.
(riscv_parse_prefixed_ext): Updated. Since we use as_bad
rather than as_fatal to report more errors, return NULL
string if the parsed end_of_version is NULL, too.
(riscv_parse_subset): Use a new boolean, no_conflict, to
report more errors when we have more than one ISA conflicts.
* elfxx-riscv.h (RISCV_DONT_CARE_VERSION): Changed to
RISCV_UNKNOWN_VERSION.
(riscv_lookup_subset_version): Removed.
(riscv_parse_subset_t): Updated.
gas/
* config/tc-riscv.c (riscv_get_default_ext_version):
Change the version type from unsigned to int.
(riscv_set_arch): Use as_bad rather than as_fatal to
report more errors.
* testsuite/gas/riscv/attribute-02.d: Updated since x must be
set with versions.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/march-ok-two-nse.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: zicsr wasn't supported
in the spec 2.2, so choose the newer spec.
* testsuite/gas/riscv/march-fail-base-01.l: Updated since as_bad.
* testsuite/gas/riscv/march-fail-base-02.l: Likewise.
* testsuite/gas/riscv/march-fail-order-std.l: Likewise.
* testsuite/gas/riscv/march-fail-order-x.l: Likewise.
* testsuite/gas/riscv/march-fail-order-z.l: Likewise.
* testsuite/gas/riscv/march-fail-porder.l: Likewise.
* testsuite/gas/riscv/march-fail-rv32ef.l: Likewise.
* testsuite/gas/riscv/march-fail-rv32id.l: Likewise.
* testsuite/gas/riscv/march-fail-rv32iq.l: Likewise.
* testsuite/gas/riscv/march-fail-rv64iq.l: Likewise.
* testsuite/gas/riscv/march-fail-single-char.l: Likewise.
* testsuite/gas/riscv/march-fail-unknown-std.l: Likewise.
* testsuite/gas/riscv/march-fail-unknown.l: Likewise.
* testsuite/gas/riscv/march-fail-uppercase.l: Likewise.
* testsuite/gas/riscv/march-fail-version.l: Likewise.
* testsuite/gas/riscv/march-fail-isa-spec.d: Likewise.
* testsuite/gas/riscv/march-fail-isa-spec.l: Likewise.
include/
* opcode/riscv.h (riscv_ext_version):
Change the version type from unsigned to int.
The SHF_GNU_RETAIN section flag is an extension to the GNU ELF OSABI.
It is defined as follows:
=========================================================
Section Attribute Flags
+-------------------------------------+
| Name | Value |
+-------------------------------------+
| SHF_GNU_RETAIN | 0x200000 (1 << 21) |
+-------------------------------------+
SHF_GNU_RETAIN
The link editor should not garbage collect the section.
=========================================================
The .section directive accepts the "R" flag, which indicates
SHF_GNU_RETAIN should be applied to the section.
There is not a direct mapping of SHF_GNU_RETAIN to the BFD
section flag SEC_KEEP. Keeping these flags distinct allows
SHF_GNU_RETAIN sections to be explicitly removed by placing them in
/DISCARD/.
bfd/ChangeLog:
* elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_retain.
(struct elf_obj_tdata): Increase has_gnu_osabi to 4 bits.
* elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_retain
for SHF_GNU_RETAIN.
(_bfd_elf_final_write_processing): Report if SHF_GNU_RETAIN is
not supported by the OSABI.
Adjust error messages.
* elflink.c (elf_link_input_bfd): Copy enabled has_gnu_osabi bits from
input BFD to output BFD.
(bfd_elf_gc_sections): gc_mark the section if SHF_GNU_RETAIN is set.
binutils/ChangeLog:
* NEWS: Announce SHF_GNU_RETAIN support.
* readelf.c (get_elf_section_flags): Handle SHF_GNU_RETAIN.
Recognize SHF_GNU_RETAIN and SHF_GNU_MBIND only for supported OSABIs.
* testsuite/binutils-all/readelf.exp: Run new tests.
Don't run run_dump_test when there isn't an assembler available.
* testsuite/lib/binutils-common.exp (supports_gnu_osabi): Adjust
comment.
* testsuite/binutils-all/readelf-maskos-1a.d: New test.
* testsuite/binutils-all/readelf-maskos-1b.d: New test.
* testsuite/binutils-all/readelf-maskos.s: New test.
* testsuite/binutils-all/retain1.s: New test.
* testsuite/binutils-all/retain1a.d: New test.
* testsuite/binutils-all/retain1b.d: New test.
gas/ChangeLog:
* NEWS: Announce SHF_GNU_RETAIN support.
* config/obj-elf.c (obj_elf_change_section): Merge SHF_GNU_RETAIN bit
between section declarations.
(obj_elf_parse_section_letters): Handle 'R' flag.
Handle numeric flag values within the SHF_MASKOS range.
(obj_elf_section): Validate SHF_GNU_RETAIN usage.
* doc/as.texi: Document 'R' flag to .section directive.
* testsuite/gas/elf/elf.exp: Run new tests.
* testsuite/gas/elf/section10.d: Unset SHF_GNU_RETAIN bit.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section22.d: New test.
* testsuite/gas/elf/section22.s: New test.
* testsuite/gas/elf/section23.s: New test.
* testsuite/gas/elf/section23a.d: New test.
* testsuite/gas/elf/section23b.d: New test.
* testsuite/gas/elf/section23b.err: New test.
* testsuite/gas/elf/section24.l: New test.
* testsuite/gas/elf/section24.s: New test.
* testsuite/gas/elf/section24a.d: New test.
* testsuite/gas/elf/section24b.d: New test.
include/ChangeLog:
* elf/common.h (SHF_GNU_RETAIN): Define.
ld/ChangeLog:
* NEWS: Announce support for SHF_GNU_RETAIN.
* ld.texi (garbage collection): Document SHF_GNU_RETAIN.
(Output Section Discarding): Likewise.
* testsuite/ld-elf/elf.exp: Run new tests.
* testsuite/ld-elf/retain1.s: New test.
* testsuite/ld-elf/retain1a.d: New test.
* testsuite/ld-elf/retain1b.d: New test.
* testsuite/ld-elf/retain2.d: New test.
* testsuite/ld-elf/retain2.ld: New test.
* testsuite/ld-elf/retain2.map: New test.
* testsuite/ld-elf/retain3.d: New test.
* testsuite/ld-elf/retain3.s: New test.
* testsuite/ld-elf/retain4.d: New test.
* testsuite/ld-elf/retain4.s: New test.
* testsuite/ld-elf/retain5.d: New test.
* testsuite/ld-elf/retain5.map: New test.
* testsuite/ld-elf/retain5lib.s: New test.
* testsuite/ld-elf/retain5main.s: New test.
* testsuite/ld-elf/retain6a.d: New test.
* testsuite/ld-elf/retain6b.d: New test.
* testsuite/ld-elf/retain6lib.s: New test.
* testsuite/ld-elf/retain6main.s: New test.
Extract FLAGM (Condition flag manipulation) feature from Armv8.4-A.
Please note that FLAGM stays a Armv8.4-A feature but now can be
assigned to other architectures or CPUs.
New -march option +flagm is added to enable independently this
feature.
This patch fixes a mistake when enabling MVE instructions that disabled support
for single precision vmla and vmul for arm mode.
gas/ChangeLog:
2020-11-12 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 26858
* config/tc-arm.c (asm_opcode insns): Fix vmul and vmla's ARM_VARIANT.
* testsuite/gas/arm/pr26858.s: New test.
* testsuite/gas/arm/pr26858.d: New test.
The redundant -md option was removed in e4ae357fe8, but it is required
for backwards compatibility with GCC 10, which passes it to the
assembler implicitly in certain situations.
It is now silently ignored.
gas/ChangeLog:
* config/tc-msp430.c (OPTION_MOVE_DATA): Define.
(md_parse_option): Ignore OPTION_MOVE_DATA.
(md_longopts): Handle -md option.
* testsuite/gas/msp430/msp430.exp: Run new test.
* testsuite/gas/msp430/empty.s: New test.
* testsuite/gas/msp430/ignore-md.d: New test.
This patch:
+ Adds new ACCDATA_EL1 (Accelerator Data) system register, see [0].
+ Adds LS64 instruction tests.
+ Update LS64 feature test with new register.
+ Fix comment for AARCH64_OPND_Rt_LS64.
[0] https://developer.arm.com/docs/ddi0595/i/aarch64-system-registers/accdata_el1
Note: as this is register only extension we do not want to hide these
registers behind -march flag going forward (they should be enabled by
default).
Atomic 64-byte load/store instructions limit Rt register number to
values matching below condition (register <Xt> number must be even
and <= 22):
if Rt<4:3> == '11' || Rt<0> == '1' then UNDEFINED;
This patch adds check if Rt fulfills above requirement.
For more details regarding atomic 64-byte load/store instruction for
Armv8.7 please refer to Arm A64 Instruction set documentation for
Armv8-A architecture profile, see document page 157 for load
instruction, and pages 414-418 for store instructions of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
Originally, if the -mabi option isn't set, then assembler will set the
abi according to the architecture string in the riscv_after_parse_args.
But we should also check and reset the abi later since the architecture
string may be reset by the elf attributes. Therefore, set the abi to
the elf_flags in the riscv_after_parse_args seems too early. Besides,
we have to set the abi_xlen before assembling any instruction, so it
should be safe to call riscv_set_abi_by_arch at the place that we set
start_assemble to TRUE. However, one minor case is that we won't call
the md_assemble when we are assembling an file without any instruction.
It seems that we still need to set the abi in riscv_elf_final_processing,
to make sure that abi can be updated according to the elf arch attributes.
For the rv32i and most elf toolchains, this patch can fix the mis-matched
ABI errors for Run pr26391-5 and Run pr26391-6 testcases. Besides, it
also correct the elf header flags of the output objects. Consider the
new testcases, mabi-fail-02 and mabi-noabi-attr-[01|02|03], they are
failed before applying this patch.
But I still get the mis-matched ABI errors for the following toolchains
when runnung the riscv-gnu-toolchain regressions,
newlib-rv32imafc-ilp32f-[medlow|medany]
linux-rv32imac-ilp32-[medlow|medany]
linux-rv32imafdc-ilp32-[medlow|medany}
linux-rv64imac-lp64-[medlow|medany]
linux-rv64imafdc-lp64-[medlow|medany}
For the newlib-rv32imafc-ilp32f, although we try to choose the abi
according to the elf attributes, we will use FLOAT_ABI_SOFT rather
than the FLOAT_ABI_SINGLE for the assmebly file wihtout setting the
-mabi, but compiler will set the abi to FLOAT_ABI_SINGLE for the
C files.
As for the linux toolchains, we also get fails for Run pr26391-5 and
Run pr26391-6 testcases. Since the linux toolchain won't generate elf
attributes to correct the ISA, and the --with-arch configure option
isn't set, assembler will try to set the default arch to rv[32|64]g,
which means the FLOAT_ABI_DOUBLE will be choosed, and may be conflict
with the abi set by the toolchain.
Therefore, I would suggest that it's is more safe to set the --with-arch
when building binutils, but it may break some testcases. For example,
ld-scripts/fill and ld-scripts/empty-address-2 may be broken when c-ext
is set. We might insert R_RISCV_ALIGN to make sure the 4-byte alignment,
but the dump result will be a bit different from what the testcase expected.
However, this patch only fix the problem - the abi, elf_flags and the
instruction, which is generated according to the abi_xlen, are all fixed
once the elf attributes are set for most elf toolchains. Other mis-matched
ABI problems should be fixed when we always build the binutils with the
--with-arch= configure option.
gas/
* config/tc-riscv.c (explicit_mabi): New boolean to indicate if
the -mabi= option is explictly set.
(md_parse_option): Set explicit_mabi to TRUE if -mabi is set.
(riscv_set_abi_by_arch): New function. If the -mabi option isn't
set, then we set the abi according to the architecture string.
Otherwise, check if there are conflicts between architecture
and abi setting.
(riscv_after_parse_args): Move the abi setting to md_assemble nad
riscv_elf_final_processing.
(md_assemble): Call the riscv_set_abi_by_arch when we set the
start_assemble to TRUE.
(riscv_elf_final_processing): Likewise, in case the file without
any instruction.
* testsuite/gas/riscv/mabi-attr-01.s: New testcase.
* testsuite/gas/riscv/mabi-attr-02.s: Likewise.
* testsuite/gas/riscv/mabi-attr-03.s: Likewise.
* testsuite/gas/riscv/mabi-fail-01.d: Likewise.
* testsuite/gas/riscv/mabi-fail-01.l: Likewise.
* testsuite/gas/riscv/mabi-fail-02.d: Likewise.
* testsuite/gas/riscv/mabi-fail-02.l: Likewise.
* testsuite/gas/riscv/mabi-noabi-attr-01a.d: Likewise.
* testsuite/gas/riscv/mabi-noabi-attr-01b.d: Likewise.
* testsuite/gas/riscv/mabi-noabi-attr-02a.d: Likewise.
* testsuite/gas/riscv/mabi-noabi-attr-02b.d: Likewise.
* testsuite/gas/riscv/mabi-noabi-attr-03a.d: Likewise.
* testsuite/gas/riscv/mabi-noabi-attr-03b.d: Likewise.
* testsuite/gas/riscv/mabi-noabi-march-01.d: Likewise.
* testsuite/gas/riscv/mabi-noabi-march-02.d: Likewise.
* testsuite/gas/riscv/mabi-noabi-march-03.d: Likewise.
Armv8.7 architecture introduces the "accelerator extension", aka
load/store of 64 bytes. New atomic load/store instructions are: LD64B,
ST64B, ST64BV and ST64BV0.
This patch adds:
+ New feature +ls64 to -march command line.
+ New atomic load/store instructions associated with above feature.
For more details regarding atomic 64-byte load/store instruction for
Armv8.7 please refer to Arm A64 Instruction set documentation for
Armv8-A architecture profile, see document page 157 for load
instruction, and pages 414-418 for store instructions of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
Symbol value is in bytes while fragS::fr_address is in octets. Fixes GAS
symver12 and symver13 tests on ELF targets with with OCTETS_PER_BYTE>1.
* config/obj-elf (elf_frob_symbol): Fix symbol value calculation
for versioned symbol aliases.
Signed-off-by: Christian Eggers <ceggers@gmx.de>
This patch fixes errors with DSB instruction after introduction of DSB nXS
variant. That change would cause GAS to reject valid DSB immediate string
operands.
gas/ChangeLog:
2020-10-28 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/tc-aarch64.c (parse_operands): Check for C0-C15 value of DSB
immediate string operand.
* testsuite/gas/aarch64/system-4.d: Update test.
* testsuite/gas/aarch64/system-4.s: Update test.
This patch adds:
+ New feature +csre to -march command line.
+ New instruction CSR PDEC associated with CSRE feature.
Please note that CSRE system registers were already upstreamed. This patch
should finalize CSRE feature implementation.
CSRE feature adds CSR PDEC (Decrements Call stack pointer by the size of
a Call stack record) instruction. Although this instruction has operand
(PDEC) it's instruction's only operand. PDEC forces instruction field Rt
to be set to 0b1111. This results in fixed opcode of the instruction.
gas/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update docs.
* config/tc-aarch64.c (parse_csr_operand): New operand parser.
(parse_operands): Call to CSR operand parser.
* testsuite/gas/aarch64/csre_csr-invalid.d: New test.
* testsuite/gas/aarch64/csre_csr-invalid.l: New test.
* testsuite/gas/aarch64/csre_csr-invalid.s: New test.
* testsuite/gas/aarch64/csre_csr.d: New test.
* testsuite/gas/aarch64/csre_csr.s: New test.
include/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_CSRE): New -march feature.
(enum aarch64_opnd): New CSR instruction field AARCH64_OPND_CSRE_CSR.
opcodes/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-opc.c (aarch64_print_operand): CSR PDEC operand print-out.
* aarch64-tbl.h (CSRE): New CSRE feature handler.
(_CSRE_INSN): New CSRE instruction type.
(struct aarch64_opcode): New 'csre' entry for a CSRE CLI feature.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds new variant (nXS) of DSB memory barrier instruction
available in Armv8.7-a. New nXS variant has different encoding in
comparison with pre Armv8.7-a DSB memory barrier variant thus new
instruction and new operand was added.
DSB memory nXS barrier variant specifies the limitation on the barrier
operation. Allowed values are:
DSB SYnXS|#28
DSB ISHnXS|#24
DSB NSHnXS|#20
DSB OSHnXS|#16
Please note that till now, for barriers, barrier operation was encoded in
4-bit unsigned immediate CRm field (in the range 0 to 15).
For DSB memory nXS barrier variant, barrier operation is a 5-bit unsigned
assembly instruction immediate, encoded in instruction in two bits CRm<3:2>:
CRm<3:2> #imm
00 16
01 20
10 24
11 28
This patch extends current AArch64 barrier instructions with above mapping.
Notable patch changes include:
+ New DSB memory barrier variant encoding for Armv8.7-a.
+ New operand BARRIER_DSB_NXS for above instruction in order to
distinguish between existing and new DSB instruction flavour.
+ New set of DSB nXS barrier options.
+ New instruction inserter and extractor map between instruction
immediate 5-bit value and 2-bit CRm field of the instruction itself (see
FLD_CRm_dsb_nxs).
+ Regeneration of aarch64-[asm|dis|opc]-2.c files.
+ Test cases to cover new instruction assembling and disassembling.
For more details regarding DSB memory barrier instruction and its
Armv8.7-a flavour please refer to Arm A64 Instruction set documentation
for Armv8-A architecture profile, see document pages 132-133 of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
gas/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Docs update.
* config/tc-aarch64.c (parse_operands): Add
AARCH64_OPND_BARRIER_DSB_NXS handler.
(md_begin): Add content of aarch64_barrier_dsb_nxs_options to
aarch64_barrier_opt_hsh hash.
* testsuite/gas/aarch64/system-4-invalid.d: New test.
* testsuite/gas/aarch64/system-4-invalid.l: New test.
* testsuite/gas/aarch64/system-4-invalid.s: New test.
* testsuite/gas/aarch64/system-4.d: New test.
* testsuite/gas/aarch64/system-4.s: New test.
include/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_BARRIER_DSB_NXS.
(aarch64_barrier_dsb_nxs_options): Declare DSB nXS options.
opcodes/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-asm.c (aarch64_ins_barrier_dsb_nxs): New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): New inserter
ins_barrier_dsb_nx.
* aarch64-dis.c (aarch64_ext_barrier_dsb_nxs): New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): New extractor
ext_barrier_dsb_nx.
* aarch64-opc.c (aarch64_print_operand): New options table
aarch64_barrier_dsb_nxs_options.
* aarch64-opc.h (enum aarch64_field_kind): New field name FLD_CRm_dsb_nxs.
* aarch64-tbl.h (struct aarch64_opcode): Define DSB nXS barrier
Armv8.7-a instruction.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds support for AArch64 -march=armv8.7-a command line option
in GAS.
Please note that this change ONLY extends -march= command line interface
with a new "armv8.7-a" option. Architectural changes like new instructions
will be added in following patches.
gas/ChangeLog:
2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Docs update.
* config/tc-aarch64.c (armv8.7-a): New arch.
* doc/c-aarch64.texi (-march=armv8.7-a): Update docs.
include/ChangeLog:
2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_7): New feature bitmask.
(AARCH64_ARCH_V8_7): New arch feature set.
opcodes/ChangeLog:
2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-tbl.h (ARMV8_7): New macro.
gas/
* config/tc-csky.c (get_operand_value): Add handler for
OPRND_TYPE_IMM5b_VSH and OPRND_TYPE_VREG_WITH_INDEX.
* testsuite/gas/csky/csky_vdsp.d : Fix the disassembling
for vector register.
opcodes/
* csky-dis.c (csky_output_operand): Add handler for
OPRND_TYPE_IMM5b_VSH and OPRND_TYPE_VREG_WITH_INDEX.
* csky-opc.h (OPRND_TYPE_VREG_WITH_INDEX): New enum.
(OPRND_TYPE_IMM5b_VSH): New enum.
(csky_v2_opcodes): Fix and add some instructions for VDSPV1.
Change-Id: Ia5675d7b716fe5c331e6121ad8f83061ef6454bb
bfd * po/es.po: Fix printf format
binutils * windmc.c: Fix printf format
gas * config/tc-arc.c: Fix printf format
opcodes * po/es.po: Fix printf format
sim * arm/armos.c: Fix printf format
* ppc/emul_netbsd.c: Fix printf format
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
Rename VexOpcode to OpcodePrefix so that OpcodePrefix can be used for
regular encoding prefix.
gas/
* config/tc-i386.c (build_vex_prefix): Replace vexopcode with
opcodeprefix.
(build_evex_prefix): Likewise.
(is_any_vex_encoding): Don't check vexopcode.
(output_insn): Handle opcodeprefix.
opcodes/
* i386-gen.c (opcode_modifiers): Replace VexOpcode with
OpcodePrefix.
* i386-opc.h (VexOpcode): Renamed to ...
(OpcodePrefix): This.
(PREFIX_NONE): New.
(PREFIX_0X66): Likewise.
(PREFIX_0XF2): Likewise.
(PREFIX_0XF3): Likewise.
* i386-opc.tbl (Prefix_0X66): New.
(Prefix_0XF2): Likewise.
(Prefix_0XF3): Likewise.
Replace VexOpcode= with OpcodePrefix=. Use Prefix_0X66 on xorpd.
Use Prefix_0XF3 on cvtdq2pd. Use Prefix_0XF2 on cvtpd2dq.
* i386-tbl.h: Regenerated.
This patch fixes a bogus use of type punning in parse_barrier() which
was causing an assembly failure on big endian LP64 hosts when attempting
to assemble "isb sy" for AArch64.
The type of the entries in aarch64_barrier_opt_hsh is
aarch64_name_value_pair. We were incorrectly casting this to the
locally-defined asm_barrier_opt which has a wider type (on LP64) for the
second member. This happened to work on little-endian hosts but fails on
LP64 big endian.
The fix is to use the correct type in parse_barrier(). This makes the
locally-defined asm_barrier_opt redundant, so remove it.
gas/ChangeLog:
* config/tc-aarch64.c (asm_barrier_opt): Delete.
(parse_barrier): Fix bogus type punning.
* testsuite/gas/aarch64/system.d: Update disassembly.
* testsuite/gas/aarch64/system.s: Add isb sy test.
PR 26692
* config/tc-z80.c (md_begin): Ensure that xpressions are empty
before using them.
(unify_indexed): Likewise.
(z80_start_line_hook): Improve hash sign handling when SDCC
compatibility mode enabled.
(md_parse_exp_not_indexed): Improve indirect addressing
detection.
(md_pseudo_table): Accept hd64 as an alias of z810.
This is feature flags update for Cortex-X1 CPU.
For more information about this processor, see [0].
[0] : https://www.arm.com/products/cortex-x
gas/ChangeLog:
2020-10-05 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/tc-aarch64.c: Update Cortex-X1 feature flags.
This is feature flags update for Cortex-X1 CPU.
For more information about this processor, see [0].
[0] : https://www.arm.com/products/cortex-x
gas/ChangeLog:
2020-10-05 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/tc-arm.c: Update Cortex-X1 feature flags.
PR 26253
gas * config/obj-elf.c (obj_elf_section): Accept a numeric value for
the "o" section flag. Interpret it as a section index. Allow an
index of zero.
* doc/as.texi: Document the new behaviour.
* NEWS: Mention the new feature. Tidy entries.
* testsuite/gas/elf/sh-link-zero.s: New test.
* testsuite/gas/elf/sh-link-zero.d: New test driver.
* testsuite/gas/elf/elf.exp: Run the new test.
* testsuite/gas/elf/section21.l: Updated expected assembler
output.
bfd * elf.c (_bfd_elf_setup_sections): Do not complain about an
sh_link value of zero when the SLF_LINK_ORDER flag is set.
(assign_section_numbers): Likewise.
When the address size prefix applies to both the memory and the register
operand, we need to extract the address size prefix from the register
operand if the memory operand has no real registers, like symbol, DISP
or symbol(%rip).
NB: GCC always generates symbol(%rip) for RIP-relative addressing for
both x32 and x86-64.
Move the .code16 tests in movdir.s to movdir-16bit to show the correct
output from objdump.
PR gas/26685
* config/tc-i386.c (process_suffix): Also check the register
operand for the address size prefix if the memory operand has
no real registers.
* testsuite/gas/i386/enqcmd-16bit.d: New file.
* testsuite/gas/i386/enqcmd-16bit.s: Likewise.
* testsuite/gas/i386/movdir-16bit.d: Likewise.
* testsuite/gas/i386/movdir-16bit.s: Likewise.
* testsuite/gas/i386/enqcmd.s: Add tests with symbol and DISP.
* testsuite/gas/i386/x86-64-enqcmd.s: Likewise.
* testsuite/gas/i386/x86-64-movdir.s: Likewise.
* testsuite/gas/i386/movdir.s: Add tests with symbol and DISP.
Remove the .code16 test.
* testsuite/gas/i386/i386.exp: Run movdir-16bit and enqcmd-16bit.
* testsuite/gas/i386/x86-64-enqcmd-intel.d: Updated.
* testsuite/gas/i386/x86-64-enqcmd.d: Likewise.
* testsuite/gas/i386/x86-64-movdir-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movdir.d: Likewise.
* testsuite/gas/i386/enqcmd-intel.d: Likewise.
* testsuite/gas/i386/enqcmd.d: Likewise.
* testsuite/gas/i386/movdir-intel.d: Likewise.
* testsuite/gas/i386/movdir.d: Likewise.
* testsuite/gas/i386/x86-64-enqcmd-intel.d: Likewise.
* testsuite/gas/i386/x86-64-enqcmd.d: Likewise.
* testsuite/gas/i386/x86-64-movdir-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movdir.d: Likewise.
* config/obj-elf (elf_pseudo_table): Add attach_to_group.
(obj_elf_attach_to_group): New function.
* doc/as.texi: Document the new directive.
* NEWS: Mention the new feature.
* testsuite/gas/elf/attach-1.s: New test.
* testsuite/gas/elf/attach-1.d: New test driver.
* testsuite/gas/elf/attach-2.s: New test.
* testsuite/gas/elf/attach-2.d: New test driver.
* testsuite/gas/elf/attach-err.s: New test.
* testsuite/gas/elf/attach-err.d: New test driver.
* testsuite/gas/elf/attach-err.err: New test error output.
* testsuite/gas/elf/elf.exp: Run the new tests.
If the address prefix changes the register operand, we need to check the
register operand when the memory operand is RIP-relative.
PR gas/26685
* config/tc-i386.c (process_suffix): Check the register operand
for the address size prefix if the memory operand is symbol(%rip).
* testsuite/gas/i386/x86-64-enqcmd.s: Add tests with RIP-relative
addressing.
* testsuite/gas/i386/x86-64-movdir.s: Likewise.
* testsuite/gas/i386/x86-64-enqcmd-intel.d: Updated.
* testsuite/gas/i386/x86-64-enqcmd.d: Likewise.
* testsuite/gas/i386/x86-64-movdir-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movdir.d: Likewise.
This patch adds support for Arm's Neoverse N2 CPU to AArch64 binutils.
gas/ChangeLog:
* config/tc-aarch64.c (aarch64_cpus): Add neoverse-n2.
* doc/c-aarch64.texi: Document support for Neoverse N2.
This simple follow-on patch adds a feature bit (FP16) that was missing
from the initial Neoverse V1 support.
gas/ChangeLog:
* config/tc-arm.c (arm_cpus): Add FP16 to Neoverse V1.
This simple follow-on patch groups the Neoverse cores together and adds
a missing feature bit (F16) to the entry for Neoverse V1.
gas/ChangeLog:
* config/tc-aarch64.c (aarch64_cpus): Group Neoverse cores
together, add missing F16 bit to Neoverse V1.
Emit an error instead of crashing in frag_new, handling this same as the
i386 port.
gas/
PR 26400
* config/tc-riscv.c (append_insn): If in absolute section, emit
error before add_relaxed_insn call.
* testsuite/gas/riscv/absolute-sec.d: New.
* testsuite/gas/riscv/absolute-sec.l: New.
* testsuite/gas/riscv/absolute-sec.s: New.
This patch adds support for Arm's Neoverse V1 CPU to AArch32 binutils.
gas/ChangeLog:
2020-09-24 Alex Coplan <alex.coplan@arm.com>
* config/tc-arm.c (arm_cpus): Add Neoverse V1.
* doc/c-arm.texi: Document Neoverse V1 support.
This adds support for Arm's Neoverse V1 CPU to AArch64 binutils.
gas/ChangeLog:
2020-09-24 Alex Coplan <alex.coplan@arm.com>
* config/tc-aarch64.c (aarch64_cpu_option_table): Add Neoverse V1.
* doc/c-aarch64.texi: Document Neoverse V1 support.
This adds support for Arm's Neoverse N2 CPU to AArch32 binutils. The
Neoverse N2 CPU builds AArch32 at EL0 and therefore needs support in the
AArch32 assembler.
gas/ChangeLog:
2020-09-24 Alex Coplan <alex.coplan@arm.com>
* config/tc-arm.c (arm_cpus): Add Neoverse N2.
* doc/c-arm.texi: Document -mcpu=neoverse-n2.
Add option parser for disassembler, and refine the codes of
parse register operand and disassemble register operand.
While strengthen the operands legality check of some instructions.
Co-Authored-By: Lifang Xia <lifang_xia@c-sky.com>
gas/
* config/tc-csky.c (parse_type_ctrlreg): Use function
csky_get_control_regno to operand.
(csky_get_reg_val): Likewise.
(is_reg_sp_with_bracket): Use function csky_get_reg_val
to parse operand.
(is_reg_sp): Refine.
(is_oimm_within_range): Fix, report error when operand
is not constant.
(parse_type_cpreg): Refine.
(parse_type_cpcreg): Refine.
(get_operand_value): Add handle of OPRND_TYPE_IMM5b_LS.
(md_assemble): Fix no error reporting somtimes when
operands number are not fit.
(csky_addc64): Refine.
(csky_subc64): Refine.
(csky_or64): Refine.
(v1_work_fpu_fo): Refine.
(v1_work_fpu_read): Refine.
(v1_work_fpu_writed): Refine.
(v1_work_fpu_readd): Refine.
(v2_work_addc): New function, strengthen the operands legality
check of addc.
* gas/testsuite/gas/csky/all.d : Use register number format when
disassemble register name by default.
* gas/testsuite/gas/csky/cskyv2_all.d : Likewise.
* gas/testsuite/gas/csky/trust.d: Likewise.
* gas/testsuite/gas/csky/cskyv2_ck860.d : Fix.
* gas/testsuite/gas/csky/trust.s : Fix.
opcodes/
* csky-dis.c (using_abi): New.
(parse_csky_dis_options): New function.
(get_gr_name): New function.
(get_cr_name): New function.
(csky_output_operand): Use get_gr_name and get_cr_name to
disassemble and add handle of OPRND_TYPE_IMM5b_LS.
(print_insn_csky): Parse disassembler options.
* opcodes/csky-opc.h (OPRND_TYPE_IMM5b_LS): New enum.
(GENARAL_REG_BANK): Define.
(REG_SUPPORT_ALL): Define.
(REG_SUPPORT_ALL): New.
(ASH): Define.
(REG_SUPPORT_A): Define.
(REG_SUPPORT_B): Define.
(REG_SUPPORT_C): Define.
(REG_SUPPORT_D): Define.
(REG_SUPPORT_E): Define.
(csky_abiv1_general_regs): New.
(csky_abiv1_control_regs): New.
(csky_abiv2_general_regs): New.
(csky_abiv2_control_regs): New.
(get_register_name): New function.
(get_register_number): New function.
(csky_get_general_reg_name): New function.
(csky_get_general_regno): New function.
(csky_get_control_reg_name): New function.
(csky_get_control_regno): New function.
(csky_v2_opcodes): Prefer two oprerans format for bclri and
bseti, strengthen the operands legality check of addc, zext
and sext.
This patch corrects "size" and "bitsize" in R_RISCV_RVC_* reloc howtos
so that elfnn-riscv.c:perform_relocation doesn't access past the end
of a section. I've also corrected "size" in the R_RISCV_CALL* reloc
howtos since these relocs apply to two consecutive instructions. That
caused fallout in the assembler with complaints about "fixup not
contained within frag" due to tc-riscv.c:append_insn finishing off a
frag after the auipc insn making up a "call" macro. Which is a little
rude since the CALL reloc also relocates the following jalr. Fixed by
changing the frag handling a little.
I've also changed R_RISCV_ALIGN and R_RISCV_TPREL_ADD marker reloc
howtos to look like R_RISCV_NONE, and corrected dst_mask for numerous
relocs, not that it matters very much.
bfd/
PR 26569
* elfxx-riscv.c (howto_table): Correct size and bitsize of
R_RISCV_RVC_BRANCH, R_RISCV_RVC_JUMP, and R_RISCV_RVC_LUI.
Correct size for R_RISCV_TLS_DTPMOD32, R_RISCV_TLS_DTPREL32,
R_RISCV_CALL, and R_RISCV_CALL_PLT. Make R_RISCV_TPREL_ADD and
R_RISCV_ALIGN like R_RISCV_NONE. Correct dst_mask many relocs.
gas/
* config/tc-riscv.c (append_insn): Don't tie off frags at CALL
relocs.
(riscv_call): Tie them off after the jalr.
(md_apply_fix): Zero fx_size of RELAX fixup.
I removed a few too many parentheses in git commit 7af677524e. This
patch fixes that problem, rewriting the expression so it won't happen
again. The patch also avoids more UB with shifts of signed values.
PR 26610
* config/tc-arm.c (move_or_literal_pool): Correct extraction of
bignum. Use unsigned "v"
(is_double_a_single): Make "v" and "mantissa" unsigned. Formatting.
(double_to_single): Likewise.
* read.c (s_nop): New function. Handles the .nop directive.
(potable): Add entry for "nop".
(s_nops): Code tidy.
* read.h (s_nop): Add prototype.
* config/tc-bpf.h (md_single_noop_insn): Define.
* config/tc-mmix.h (md_single_noop_insn): Define.
* config/tc-or1k.h (md_single_noop_insn): Define.
* config/tc-s12z.c (md_assemble): Preserve the input line pointer,
rather than corrupting it.
* write.c (relax_segment): Update error message regarding
non-absolute values passed to .fill and .nops.
* NEWS: Mention the new directive.
* doc/as.texi: Document the new directive.
* doc/internals.texi: Document the new internal macros used to
implement the new directive.
* testsuite/gas/all/nop.s: New test.
* testsuite/gas/all/nop.d: New test control file.
* testsuite/gas/all/gas.exp: Run the new test.
* testsuite/gas/elf/dwarf-5-nop-for-line-table.s: New test.
* testsuite/gas/elf/dwarf-5-nop-for-line-table.d: New test
control file.
* testsuite/gas/elf/elf.exp: Run the new test.
* testsuite/gas/i386/space1.l: Adjust expected output.
Add arches CK804, CK805 and CK800. CK800 is an special arch which
support all instructions for CSKYV2. Refine the cpu tables to
simplify adding a new cpu.
Co-Authored-By: Lifang Xia <lifang_xia@c-sky.com>
gas/
* config/tc-csky.c (struct csky_cpu_info): Add new members
isa_flag, features and ver.
(struct csky_cpu_feature): New.
(struct csky_cpu_version): New.
(CSKY_FEATURE_MAX): Define.
(CSKY_CPU_REVERISON_MAX): Define.
(FEATURE_DSP_EXT, FEATURE_DSP, FEATURE_MMU, FEATURE_VDSP,
FEATURE_FLOAT, FEATURE_TRUST, FEATURE_JAVA, FEATURE_SHIELD):
Define, each standard one collection of instructions.
(CSKY_FEATURES_DEF_NULL, CSKY_FEATURES_DEF_e,
CSKY_FEATURES_DEF_t, CSKY_FEATURES_DEF_f, CSKY_FEATURES_DEF_v,
CSKY_FEATURES_DEF_ef, CSKY_FEATURES_DEF_jt,
CSKY_FEATURES_DEF_efht, CSKY_FEATURES_DEF_efv,
CSKY_FEATURES_DEF_eft, CSKY_FEATURES_DEF_d,
CSKY_FEATURES_DEF_df, CSKY_FEATURES_DEF_ft,
CSKY_FEATURES_DEF_tv, CSKY_FEATURES_DEF_fv,
CSKY_FEATURES_DEF_dft, CSKY_FEATURES_DEF_dfv,
CSKY_FEATURES_DEF_ftv, CSKY_FEATURES_DEF_eftv): Define,
the features combination used by cpu.
(CSKY_CPU_REVERISON_r0p0, CSKY_CPU_REVERISON_r1p0,
CSKY_CPU_REVERISON_r2p0, CSKY_CPU_REVERISON_r3p0,
CSKY_CPU_REVERISON_RESERVED, CSKY_CPU_REVERISON_R3):
Define, version information used by cpu.
(csky_cpus): Refine, and add CK804, CK805 and CK800.
(parse_cpu): Refine.
(parse_arch): Refine.
(md_show_usage): Refine.
(md_begin): Refine.
include/
* opcode/csky.h (CSKY_ARCH_804): Define.
(CSKY_ARCH_805): Define.
(CSKY_ARCH_800): Define.
We don't support power10 on ppc32, mainly because some instructions
have 34-bit fields for which we don't have relocations on ppc32.
If you try to assemble typical code, you'll see errors saying
"reloc ... not supported by object file format". Also, on 32-bit
hosts with binutils configured without a 64-bit bfd, you'll see errors
saying "bignum invalid" when using large offsets. But let's not kill
output of prefix insns entirely on 32-bit hosts.
* config/tc-ppc.c (md_assemble): Emit prefix insn by parts when
valueT is smaller than 64 bits.
The option corresponds to GCC to control the float calling conversion,
and the value will be stored in .csky.attributes section.
Co-Authored-By: Lifang Xia <lifang_xia@c-sky.com>
gas/
* config/tc-csky.c (float_abi): New.
(md_longopts): Add mfloat-abi.
(struct sky_option_value_table): New.
(csky_float_abis): New, the possible values for -mfloat-abi.
(parse_float_abi): New funtion.
(md_show_usage): Show help information for -mfloat-abi.
(set_csky_attribute): Store float-abi value.
Link-time relaxations of branches are common for MSP430, given that GCC
can generate pessimal branch instructions, and the
-mcode-region=either/-mdata-region=either options to shuffle sections
can further change the type of branch instruction required.
These relaxations can result in invalid code when .uleb128
directives, used in the .gcc_except_table section, are used to calculate
the distance between two labels. A value for the .uleb128 directive is
calculated at assembly-time, and can't be updated at link-time, even if
relaxation causes the distance between the labels to change.
This patch adds relocations for subtract expressions in .uleb128
directives, to allow the linker to re-calculate the value of these
expressions after relaxation has been performed.
bfd/ChangeLog:
* bfd-in2.h (bfd_reloc_code_real): Add
BFD_RELOC_MSP430_{SET,SUB}_ULEB128.
* elf32-msp430.c (msp430_elf_ignore_reloc): New.
(elf_msp430_howto_table): Add R_MSP430{,X}_GNU_{SET,SUB}_ULEB128.
(msp430_reloc_map): Add R_MSP430_GNU_{SET,SUB}_ULEB128.
(msp430x_reloc_map): Add R_MSP430X_GNU_{SET,SUB}_ULEB128.
(write_uleb128): New.
(msp430_final_link_relocate): Handle R_MSP430{,X}_GNU_{SET,SUB}_ULEB128.
* libbfd.c (_bfd_write_unsigned_leb128): New.
* libbfd.h (_bfd_write_unsigned_leb128): New prototype.
Add BFD_RELOC_MSP430_{SET,SUB}_ULEB128.
* reloc.c: Document BFD_RELOC_MSP430_{SET,SUB}_ULEB128.
binutils/ChangeLog:
* readelf.c (target_specific_reloc_handling): Handle
R_MSP430{,X}_GNU_{SET,SUB}_ULEB128.
gas/ChangeLog:
* config/tc-msp430.c (msp430_insert_uleb128_fixes): New.
(msp430_md_end): Call msp430_insert_uleb128_fixes.
include/ChangeLog:
* elf/msp430.h (elf_msp430_reloc_type): Add
R_MSP430_GNU_{SET,SUB}_ULEB128.
(elf_msp430x_reloc_type): Add R_MSP430X_GNU_{SET,SUB}_ULEB128.
ld/ChangeLog:
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
* testsuite/ld-msp430-elf/uleb128.s: New test.
* testsuite/ld-msp430-elf/uleb128_430.d: New test.
* testsuite/ld-msp430-elf/uleb128_430x.d: New test.
This adds support for the Arm Cortex-R82 CPU in AArch64 GAS. For more
information about this processor, see [0].
[0] : https://developer.arm.com/ip-products/processors/cortex-r/cortex-r82
gas/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* config/tc-aarch64.c (aarch64_cpus): Add Cortex-R82.
* doc/c-aarch64.texi: Document -mcpu=cortex-r82.
This patch adds support for the system registers introduced in Armv8-R
AArch64.
gas/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* config/tc-aarch64.c (parse_sys_reg): Also pass sysreg name to
validation function.
(parse_sys_ins_reg): Likewise.
(print_operands): Pass CPU features to aarch64_print_operand().
* testsuite/gas/aarch64/v8-r-bad-sysregs.d: New test.
* testsuite/gas/aarch64/v8-r-bad-sysregs.l: Error output.
* testsuite/gas/aarch64/v8-r-bad-sysregs.s: Input.
* testsuite/gas/aarch64/v8-r-sysregs-need-arch.d: New test.
* testsuite/gas/aarch64/v8-r-sysregs-need-arch.l: Error output.
* testsuite/gas/aarch64/v8-r-sysregs.d: New test.
* testsuite/gas/aarch64/v8-r-sysregs.s: Input for previous two tests.
include/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* opcode/aarch64.h (aarch64_sys_ins_reg_supported_p): Also take
system register name in order to simplify validation for v8-R.
(aarch64_print_operand): Also take CPU feature set, as disassembly for
system registers now depends on arch variant.
opcodes/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* aarch64-dis.c (print_operands): Pass CPU features to
aarch64_print_operand().
* aarch64-opc.c (aarch64_print_operand): Use CPU features to determine
preferred disassembly of system registers.
(SR_RNG): Refactor to use new SR_FEAT2 macro.
(SR_FEAT2): New.
(SR_V8_1_A): New.
(SR_V8_4_A): New.
(SR_V8_A): New.
(SR_V8_R): New.
(SR_EXPAND_ELx): New.
(SR_EXPAND_EL12): New.
(aarch64_sys_regs): Specify which registers are only on
A-profile, add R-profile system registers.
(ENC_BARLAR): New.
(PRBARn_ELx): New.
(PRLARn_ELx): New.
(aarch64_sys_ins_reg_supported_p): Reject EL3 registers for
Armv8-R AArch64.
This patch adds the basic infrastructure needed to support Armv8-R in
AArch64 binutils: new command-line flags, new feature bits, a new BFD
architecture, and support for differentiating between architecture
variants in the disassembler.
The new command-line options added by this patch are -march=armv8-r in
GAS and -m aarch64:armv8-r in objdump.
The disassembler support is necessary since Armv8-R AArch64 introduces a
system register (VSCTLR_EL2) which shares an encoding with a different
system register (TTBR0_EL2) in Armv8-A. This also allows us to use the
correct preferred disassembly for the new DFB alias introduced in
Armv8-R.
bfd/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* archures.c (bfd_mach_aarch64_8R): New.
* bfd-in2.h: Regenerate.
* cpu-aarch64.c (bfd_aarch64_arch_v8_r): New.
(bfd_aarch64_arch_ilp32): Update tail pointer.
gas/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* config/tc-aarch64.c (aarch64_archs): Add armv8-r.
* doc/c-aarch64.texi: Document -march=armv8-r.
include/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_A): New.
(AARCH64_FEATURE_V8_R): New.
(AARCH64_ARCH_V8): Include new A-profile feature bit.
(AARCH64_ARCH_V8_R): New.
opcodes/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* aarch64-dis.c (arch_variant): New.
(determine_disassembling_preference): Disassemble according to
arch variant.
(select_aarch64_variant): New.
(print_insn_aarch64): Set feature set.
If bfd_vma is 32 bits, gcc complains about shift counts exceeding
width of the type.
* config/tc-pdp11.c (md_number_to_chars): Condition nbytes=8 code
on BFD64.
Move divul and divsl to CSKYV2_ISA_3E3R3 instruction set, which is
enabled by ck803r3, and it's still a part of enhance DSP instruction
set.
gas/
* config/tc-csky.c (csky_cpus): Add ck803r3.
(CSKY_ISA_803R3): Define.
(CSKY_ISA_803R2): Refine, use CSKY_ISA_803R1.
include/
* opcode/csky.h (CSKYV2_ISA_3E3R3): Define.
opcodes/
* csky-opc.h (csky_v2_opcodes): Move divul and divsl
to CSKYV2_ISA_3E3R3 instruction set.
PR 26420
PR 26421
PR 26425
PR 26427
* config/tc-arm.c (struct arm_it): Make size, size_req, cond and
uncond_value unsigned.
(parse_vfp_reg_list): Make setmask unsigned, vpr_str_len size_t.
(parse_big_immediate): Cast generic_bignum elements to unsigned.
(encode_thumb32_immediate): Shift left 0xffU.
(double_to_single): Make sign unsigned. Tidy.
(move_or_literal_pool): Cast LITTLE_NUM elements to uint64_t or
valueT.
(vfp_or_neon_is_neon): Adjust inst.uncond_value expression.
(md_assemble): Likewise.
(handle_pred_state): Make cond unsigned.
(thumb32_negate_data_op): Make variables unsigned.
(md_apply_fix): Make value and newval unsigned, adjust uses.
This also fixes the packing of the nibble buffer, which contains
rubbish in the top 4 bits of each element.
PR 26510
* config/tc-z8k.c (buffer): Use unsigned char.
(apply_fix): Use unsigned char* pointers.
(build_bytes): Likewise and mask nibbles when packing.
Always use unsigned constants in expressions generating masks. The
following trys mightily to avoid UB (but hits it anyway with bits=32
and 0x7fffffff << 1), and worse, for 32-bit int, 64-bit long, bits=32
doesn't generate 0xffffffff.
max = ((((1 << (bits - 1)) - 1) << 1) | 1);
results in -1, or max = 0xffffffffffffffff.
This patch fixes that problem, a possible shift exponent of -1U,
removes some dead code, and makes general tidies.
PR26437
PR26438
* config/tc-cr16.c: Include limits.h, formatting.
(CR16_PRINT): Wrap params in parentheses. Remove parens from uses
throughout file.
(getconstant): Handle zero nbits.
(print_operand): Simplify handling of index regs.
(check_range): Use int32_t variables. Correct range checks.
This patch adds support for xBPF, another ISA targetting the BPF
virtual architecture. For now, the primary difference between eBPF
and xBPF is that xBPF supports indirect calls through the
'call %reg' form of the call instruction.
bfd/
* archures.c (bfd_mach_xbpf): Define.
* bfd-in2.h: Regenerate.
* cpu-bpf.c (bfd_xbpf_arch) New.
(bfd_bpf_arch) Update next in list field to point to xbpf arch.
cpu/
* bpf.cpu (arch bpf): Add xbpf mach and isas.
(define-xbpf-isa) New pmacro.
(all-isas) Add xbpfle,xbpfbe.
(endian-isas): New pmacro.
(mach xbpf): New.
(model xbpf-def): Likewise.
(h-gpr): Add xbpf mach.
(f-dstle, f-srcle, dstle, srcle): Add xbpfle isa.
(f-dstbe, f-srcbe, dstbe, srcbe): Add xbpfbe isa.
(define-alu-insn-un): Use new endian-isas pmacro.
(define-alu-insn-bin, define-alu-insn-mov): Likewise.
(define-endian-insn, define-lddw): Likewise.
(dlind, dxli, dxsi, dsti): Likewise.
(define-cond-jump-insn, define-call-insn): Likewise.
(define-atomic-insns): Likewise.
gas/
* config/tc-bpf.c: Add option -mxbpf to select xbpf isa.
* testsuite/gas/bpf/indcall-1.d: New file.
* testsuite/gas/bpf/indcall-1.s: Likewise.
* testsuite/gas/bpf/indcall-bad-1.l: Likewise.
* testsuite/gas/bpf/indcall-bad-1.s: Likewise.
* testsuite/gas/bpf/bpf.exp: Run new tests.
opcodes/
* bpf-desc.c: Regenerate.
* bpf-desc.h: Likewise.
* bpf-opc.c: Likewise.
* bpf-opc.h: Likewise.
* disassemble.c (disassemble_init_for_target): Set bits for xBPF
ISA when appropriate.
Some versions of gcc with -Werror=format-overflow complain about using
a perfectly good 7 char buffer for "r%dr%d" when the int is between 0
and 64, apparently not seeing the value range.
note: __builtin___sprintf_chk output between 5 and 24 bytes into a destination of size 7
* config/tc-arc.c (declare_register_set): Avoid false positive
format-overflow warning.
* config/tc-epiphany.c (md_assemble): Likewise.
* config/tc-mips.c (md_begin): Likewise.
* config/tc-mmix.c (mmix_md_begin): Likewise.
* config/tc-nds32.c (nds32_elf_append_relax_relocs): Avoid false
positive "may be used uninitialized" warning.
A number of the tic54x tests were failing, and I thought it worth
investigating since the target makes use of a lot of hash tables, and
we've just changed gas hash tables. It turns out none of the gas
failures were due to hashing.
* config/tc-tic54x.c (stag_add_field_symbols): Don't free "name"
in case where it isn't copied.
* config/tc-tic54x.h (LOCAL_LABELS_FB): Undef.
* testsuite/gas/tic54x/field.d: Dump section contents and symbols
rather than disassembling.
* testsuite/gas/tic54x/set.d: Adjust for newer disassembly.
Get rid of sy_ prefix, and some unused fields.
* symbols.c (struct symbol_flags): Rename sy_volatile to volatil,
and remove sy_ from other field names. Update throughout.
(struct symbol): Remove sy_ from field names. Delete unused
TARGET_SYMBOL_FIELDS. Update throughout file. Move after..
(struct local_symbol): ..here. Remove lsy_ from field names.
Delete unused TC_LOCAL_SYMFIELD_TYPE. Update throughout file.
(local_symbol_resolved_p, local_symbol_mark_resolved): Delete.
Expand uses throughout file.
(local_symbol_get_frag, local_symbol_set_frag): Likewise.
(symbol_new): Move symbol_table_frozen test to..
(symbol_append): ..here, and..
(symbol_insert): ..here.
(resolve_symbol_value, symbol_relc_make_expr): White space fixes.
(HANDLE_XADD_OPT1, HANDLE_XADD_OPT2): Likewise.
* config/obj-coff.h (RESOLVE_SYMBOL_REDEFINITION): Update.
gas/
* config/tc-csky.c (csky_insn_info): Add member last_isize.
(md_assemble): Assign value to csky_insn.last_isize.
* testsuite/gas/csky/enhance_dsp.d: Test bloop's two operands form.
* testsuite/gas/csky/enhance_dsp.s: Likewise.
opcodes/
* csky-opc.h (csky_v2_opcodes): Add two operands form for bloop.
This patch fixes an internal error in GAS when defining a section using
a symbol that has already been named but not defined. For a minimal
reproducer, try the following input:
a=b
.sect a
The problem is that obj_elf_change_section() happily reuses the symbol
"a" created by equals() without clearing the sy_value field: prior to
this patch, it just set bsym. This caused a problem when attempting to
resolve the section symbol, since resolve_symbol_value() ended up
resolving the symbol as if it were the original symbol created by
equals(), which ends up leaving the section symbol in the undefined
section instead of in section a, hence the call to abort() in
S_SET_SEGMENT().
gas/ChangeLog:
* config/obj-elf.c (obj_elf_change_section): When repurposing an
existing symbol, ensure that we set sy_value as per other (fresh)
section symbols.
* testsuite/gas/elf/elf.exp: Add new test.
* testsuite/gas/elf/section-symbol-redef.d: New test.
* testsuite/gas/elf/section-symbol-redef.s: Input for test.
* config/tc-arm.c (do_neon_cvt_1): Parse vcvtne as vcvt-ne for
NS_FD shape when MVE is present
* testsuite/gas/arm/mve-vcvtne-it-bad.d: New test.
* testsuite/gas/arm/mve-vcvtne-it-bad.l: New test.
* testsuite/gas/arm/mve-vcvtne-it-bad.s: New test.
* testsuite/gas/arm/mve-vcvtne-it.d: New test.
* testsuite/gas/arm/mve-vcvtne-it.s: New test.
This patch fixes an assertion failure on long system register operands
in the AArch64 backend. See the new testcase for an input which
reproduces the issue.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sys_reg): Don't assert when parsing
a long system register.
(parse_sys_ins_reg): Likewise.
(sysreg_hash_insert): New.
(md_begin): Use sysreg_hash_insert() to ensure all system
registers are no longer than the maximum length at startup.
* testsuite/gas/aarch64/invalid-sysreg-assert.d: New test.
* testsuite/gas/aarch64/invalid-sysreg-assert.l: Error output.
* testsuite/gas/aarch64/invalid-sysreg-assert.s: Input.
include/ChangeLog:
* opcode/aarch64.h (AARCH64_MAX_SYSREG_NAME_LEN): New.
The MSP430 GAS option "-md" is supposed to indicate that the CRT startup
code should copy data from ROM to RAM at startup. However, this option
has no effect; GAS handles the related behaviour automatically by
looking for the presence of certain symbols in the input file.
gas/ChangeLog:
* config/tc-msp430.c (OPTION_MOVE_DATA): Remove.
(md_parse_option): Remove case for OPTION_MOVE_DATA.
(md_longopts): Remove "md" entry.
(md_show_usage): Likewise.
Since (%bp)/(%ebp)/(%rbp) are encoded as 0(%bp)/0(%ebp)/0(%rbp), use
disp32/disp16 on 0(%bp)/0(%ebp)/0(%rbp) for {disp32}.
Note: Since there is no disp32 on 0(%bp), use disp16 instead.
PR gas/26305
* config/tc-i386.c (build_modrm_byte): Use disp32/disp16 on
(%bp)/(%ebp)/(%rbp) for {disp32}.
* doc/c-i386.texi: Update {disp32} documentation.
* testsuite/gas/i386/pseudos.s: Add (%bp)/(%ebp) tests.
* testsuite/gas/i386/x86-64-pseudos.s: Add (%ebp)/(%rbp) tests.
* testsuite/gas/i386/pseudos.d: Updated.
* testsuite/gas/i386/x86-64-pseudos.d: Likewise.
Ever since commit 4d7206a284 ("Rework MIPS macro relaxation, fix string
merging bug"), <https://sourceware.org/ml/binutils/2004-01/msg00248.html>,
`prev_reloc_op_frag' has only been set and never used. Remove it then.
gas/
* config/tc-mips.c (prev_reloc_op_frag): Remove variable.
(my_getSmallExpression): Adjust accordingly.
PR gas/4572
When / is a comment character, its use as binary "divide" operator needs
escaping by a backslash. Besides the scrubber needing to support this
(addressed in an earlier change), there are also a few provisions needed
in target specific operator handling.
As the spec calls for % and * to also be escaped because of being
"overloaded", also recognize these, despite the overloading there not
really preventing their use as operators in most (%) or all (*) cases,
given the way how the rest of the assembler works.
To bring source and testsuite in line, also drop the TE_I386AIX part of
the respective conditional, as i?86-*-aix* support had been removed a
while ago.
Various provisions exist for insns to be placed in the absolute section,
yet actually trying to do so didn't work. While data emission (of non-
zero values) is not allowed by generic code, I think this functionality
is useful for the programmer to be able to determine the size of insns.
Therefore, rather than turning the silnet failure into a verbose one,
make things mostly work; the one class of insns not supported (yet) are
branches (JMP and Jcc) with dynamically determined displacement widths.
In this one case, an error now gets reported instead of silently
ignoring the code.
Also avoid recording ISA / feature usage for insns emitted to the
absolute section.
When encoding a 32-bit offset, there is no need to sign-extend it to 64
bits since only the lower 32 bits are used.
* config/tc-i386.c (offset_in_range): Remove 32-bit sign
extension.
Extract extended states from operand types in instruction template. Set
xstate_zmm for master register move.
* config/tc-i386.c (_i386_insn): Remove has_regmmx, has_regxmm,
has_regymm, has_regzmm and has_regtmm. Add xstate.
(md_assemble): Set i.xstate from operand types in instruction
template.
(build_modrm_byte): Updated.
(output_insn): Check i.xstate.
* testsuite/gas/i386/i386.exp: Run property-6 and
x86-64-property-6.
* testsuite/gas/i386/property-6.d: New file.
* testsuite/gas/i386/property-6.s: Updated.
* testsuite/gas/i386/x86-64-property-6.d: Likewise.
