This patch adds support for xBPF, another ISA targetting the BPF
virtual architecture. For now, the primary difference between eBPF
and xBPF is that xBPF supports indirect calls through the
'call %reg' form of the call instruction.
bfd/
* archures.c (bfd_mach_xbpf): Define.
* bfd-in2.h: Regenerate.
* cpu-bpf.c (bfd_xbpf_arch) New.
(bfd_bpf_arch) Update next in list field to point to xbpf arch.
cpu/
* bpf.cpu (arch bpf): Add xbpf mach and isas.
(define-xbpf-isa) New pmacro.
(all-isas) Add xbpfle,xbpfbe.
(endian-isas): New pmacro.
(mach xbpf): New.
(model xbpf-def): Likewise.
(h-gpr): Add xbpf mach.
(f-dstle, f-srcle, dstle, srcle): Add xbpfle isa.
(f-dstbe, f-srcbe, dstbe, srcbe): Add xbpfbe isa.
(define-alu-insn-un): Use new endian-isas pmacro.
(define-alu-insn-bin, define-alu-insn-mov): Likewise.
(define-endian-insn, define-lddw): Likewise.
(dlind, dxli, dxsi, dsti): Likewise.
(define-cond-jump-insn, define-call-insn): Likewise.
(define-atomic-insns): Likewise.
gas/
* config/tc-bpf.c: Add option -mxbpf to select xbpf isa.
* testsuite/gas/bpf/indcall-1.d: New file.
* testsuite/gas/bpf/indcall-1.s: Likewise.
* testsuite/gas/bpf/indcall-bad-1.l: Likewise.
* testsuite/gas/bpf/indcall-bad-1.s: Likewise.
* testsuite/gas/bpf/bpf.exp: Run new tests.
opcodes/
* bpf-desc.c: Regenerate.
* bpf-desc.h: Likewise.
* bpf-opc.c: Likewise.
* bpf-opc.h: Likewise.
* disassemble.c (disassemble_init_for_target): Set bits for xBPF
ISA when appropriate.
The GAS struct frag ends with a field `fr_literal' whose purpose is to
mark the begining of the frag's data:
struct frag {
...
/* Data begins here. */
char fr_literal[1];
};
The code in gas/config/tc-bpf.c recently committed:
where = fixP->fx_frag->fr_literal + fixP->fx_where;
where[1] = target_big_endian ? 0x01 : 0x10;
triggers the stringop-overflow warning in GCC 10+, since the compiler
assumes the size of the modified buffer is 1 byte. This patch
slightly modifies the code to make tc-bpf.c buildable with GCC 10+.
2020-06-05 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c (md_apply_fix): Avoid GCC 10 warning
stringop-overflow.
cpu/ChangeLog:
2020-06-02 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (define-bpf-isa): Set base-insn-bitsize to 64.
* bpf.opc (bpf_print_insn): Do not set endian_code here.
gas/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c (md_begin): Pass CGEN_CPU_OPEN_INSN_ENDIAN to
bpf_cgen_cpu_open.
(md_assemble): Remove no longer needed hack.
opcodes/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* disassemble.c (disassemble_init_for_target): Set endian_code for
bpf targets.
* bpf-desc.c: Regenerate.
* bpf-opc.c: Likewise.
* bpf-dis.c: Likewise.
The CGEN support code in opcodes accesses instruction contents using a
couple of functions defined in cgen-opc.c: cgen_get_insn_value and
cgen_put_insn_value. These functions use the "instruction endianness"
in the CPU description to order the read/written bytes.
The process of writing an instruction to the object file is:
a) cgen_put_insn_value ;; Writes out the opcodes.
b) ARCH_cgen_insert_operand
insert_normal
insert_1
cgen_put_insn_value ;; Writes out the bytes of the
;; operand.
Likewise, the process of reading an instruction from the object file
is:
a) cgen_get_insn_value ;; Reads the opcodes.
b) ARCH_cgen_extract_operand
extract_normal
extract_1
cgen_get_insn_value ;; Reads in the bytes of the
;; operand.
As can be seen above, cgen_{get,put}_insn_value are used to both
process the instruction opcodes (the constant fields conforming the
base instruction) and also the values of the instruction operands,
such as immediates.
This is problematic for architectures in which the endianness of
instructions is different to the endianness of data. An example is
BPF, where instructions are always encoded big-endian but the data may
be either big or little.
This patch changes the cgen_{get,put}_insn_value functions in order to
get an extra argument with the endianness to use, and adapts the
existin callers to these functions in order to provide cd->endian or
cd->insn_endian, whatever appropriate. Callers like extract_1 and
insert_1 pass cd->endian (since they are reading/writing operand
values) while callers reading/writing the base instruction pass
cd->insn_endian instead.
A few little adjustments have been needed in some existing CGEN based
ports:
* The BPF assembler uses cgen_put_insn_value. It has been adapted to
pass the new endian argument.
* The mep port has code in mep.opc that uses cgen_{get,put}_insn_value.
It has been adapted to pass the new endianargument. Ditto for a
call in the assembler.
Tested with --enable-targets=all.
Regested in all supported targets.
No regressions.
include/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/cgen.h: Get an `endian' argument in both
cgen_get_insn_value and cgen_put_insn_value.
opcodes/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* cgen-opc.c (cgen_get_insn_value): Get an `endian' argument.
(cgen_put_insn_value): Likewise.
(cgen_lookup_insn): Pass endianness to cgen_{get,put}_insn_value.
* cgen-dis.in (print_insn): Likewise.
* cgen-ibld.in (insert_1): Likewise.
(insert_1): Likewise.
(insert_insn_normal): Likewise.
(extract_1): Likewise.
* bpf-dis.c: Regenerate.
* bpf-ibld.c: Likewise.
* bpf-ibld.c: Likewise.
* cgen-dis.in: Likewise.
* cgen-ibld.in: Likewise.
* cgen-opc.c: Likewise.
* epiphany-dis.c: Likewise.
* epiphany-ibld.c: Likewise.
* fr30-dis.c: Likewise.
* fr30-ibld.c: Likewise.
* frv-dis.c: Likewise.
* frv-ibld.c: Likewise.
* ip2k-dis.c: Likewise.
* ip2k-ibld.c: Likewise.
* iq2000-dis.c: Likewise.
* iq2000-ibld.c: Likewise.
* lm32-dis.c: Likewise.
* lm32-ibld.c: Likewise.
* m32c-dis.c: Likewise.
* m32c-ibld.c: Likewise.
* m32r-dis.c: Likewise.
* m32r-ibld.c: Likewise.
* mep-dis.c: Likewise.
* mep-ibld.c: Likewise.
* mt-dis.c: Likewise.
* mt-ibld.c: Likewise.
* or1k-dis.c: Likewise.
* or1k-ibld.c: Likewise.
* xc16x-dis.c: Likewise.
* xc16x-ibld.c: Likewise.
* xstormy16-dis.c: Likewise.
* xstormy16-ibld.c: Likewise.
gas/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* cgen.c (gas_cgen_finish_insn): Pass the endianness to
cgen_put_insn_value.
(gas_cgen_md_apply_fix): Likewise.
(gas_cgen_md_apply_fix): Likewise.
* config/tc-bpf.c (md_apply_fix): Pass data endianness to
cgen_put_insn_value.
* config/tc-mep.c (mep_check_ivc2_scheduling): Pass endianness to
cgen_put_insn_value.
cpu/ChangeLog:
2020-06-02 Jose E. Marchesi <jose.marchesi@oracle.com>
* mep.opc (print_slot_insn): Pass the insn endianness to
cgen_get_insn_value.
Tested in a x86_64 host.
gas/ChangeLog:
2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c (pe_lcomm_internal): Adapted from tc-i386.c.
(pe_lcomm): Likewise.
(md_pseudo_table): Use pe_lcomm to implement .lcomm.
This little patch adds support to the eBPF port of GAS for a few data
directives. The names for the directives have been chosen to be
coherent with the suffixes used in eBPF instructions: b, h, w and dw
for 8, 16, 32 and 64-bit values respectively.
Documentation and tests included.
Tested in a x86_64 host.
gas/ChangeLog:
2019-07-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c (md_pseudo_table): .half, .word and .dword.
* testsuite/gas/bpf/data.s: New file.
* testsuite/gas/bpf/data.d: Likewise.
* testsuite/gas/bpf/data-be.d: Likewise.
* testsuite/gas/bpf/bpf.exp: Run data and data-be.
* doc/c-bpf.texi (BPF Directives): New section.
