Triggered by https://launchpad.net/bugs/1275210, to be able to cope
with UTF-8 characters in gdbtui.
Reference:
https://sourceware.org/ml/gdb-patches/2017-09/msg00356.html
gdb/ChangeLog:
2017-09-26 Matthias Klose <doko@ubuntu.com>
* configure.ac: Search ncursesw before ncurses.
Check ncursesw/ncurses.h before ncurses/ncurses.h.
* gdb_curses.h: Include <ncursesw/ncurses.h>
* config.in, configure: Regenerate.
Given that GCC has obsoleted/removed support for Solaris 9 in GCC 4.9/5 in 2013:
https://gcc.gnu.org/gcc-4.9/changes.htmlhttps://gcc.gnu.org/ml/gcc-patches/2013-05/msg00728.html
and the last gdb version that can be compiled with gcc 4.9 is 7.12.1 only when
configured with --disable-build-with-cxx, it's time to obsolete/remove support
for Solaris < 10.
This patch does this, simplifying configure.nat along the way (only a single
sol2 configuration with variants for i386 and sparc).
Some configure checks for older Solaris versions can go, too, and the check
for libthread_db.so.1 removed:
* Since Solaris 10, dlopen has moved to libc and libdl.so is just a
filter on ld.so.1, so no need to check.
* $RDYNAMIC is already handled above (and is a no-op with Solaris ld
anyway).
Both proc-service.c and sol-thread.c lose support for (Solaris-only)
PROC_SERVICE_IS_OLD.
The attached revised patch has been tested on sparcv9-sun-solaris2.10,
sparcv9-sun-solaris2.11.4, amd64-pc-solaris2.10, amd64-pc-solaris2.11.4,
and x86_64-pc-linux-gnu.
I've also started an i386-pc-solaris2.9 build to check that it really
stops as expected.
PR gdb/22185
* configure.host <*-*-solaris2.[01], *-*-solaris2.[2-9]*>: Mark as
obsolete.
Use gdb_host sol2 for i[34567]86-*-solaris2*, x86_64-*-solaris2*.
Remove i386sol2 support.
* configure.nat <i386sol2>: Remove.
<sol2-64>: Fold into ...
<sol2>: ... this.
Move common settings to default section.
Add sol-thread.o.
* configure.tgt <i[34567]86-*-solaris2.1[0-9]*,
x86_64-*-solaris2.1[0-9]*>: Rename to ...
<i[34567]86-*-solaris2*, x86_64-*-solaris2*>: ... this.
<i[34567]86-*-solaris*>: Remove.
<sparc-*-solaris2.[0-6], sparc-*-solaris2.[0-6].*>: Remove.
* configure.ac: Remove wctype in libw check.
(_MSE_INT_H): Don't define on Solaris 7-9.
<solaris*>: Remove libthread_db.so.1 check.
* configure: Regenerate.
* config.in: Regenerate.
* proc-service.c: Remove PROC_SERVICE_IS_OLD handling.
(gdb_ps_prochandle_t, gdb_ps_read_buf_t, gdb_ps_write_buf_t)
(gdb_ps_size_t): Remove.
Use base types in users.
* sol-thread.c: Likewise, also for gdb_ps_addr_t.
* NEWS (Changes since GDB 8.0): Document Solaris 2.0-9 removal.
Recent versions of NetBSD hide certain kernel structures needed by the
KVM target from userland unless this macro is defined.
gdb/ChangeLog:
* bsd-kvm.o: Define _KMEMUSER.
* configure.ac: Define _KMEMUSER when checking for "struct lwp".
* configure: Regenerate.
Version 2 of libipt adds an event system to instruction flow decoders and
deprecates indicating events via flags in struct pt_insn. Add configuration
checks to determine which version we have.
gdb/
* configure.ac: Check for pt_insn_event, struct pt_insn.enabled,
and struct pt_insn.resynced.
* configure: Regenerated.
* config.in: Regenerated.
Due to my ongoing work to make it possible for gdbserver to start the
inferior using the shell, I had to share the fork_inferior function
under the "nat/" directory. In order to do that, I created a new file
and put the function there; however, this meant that I now had to
update some of the *.mh files (under "gdb/config") and add the new
file as a dependency to be built natively. Bleh...
After talking a bit to Pedro about this, the idea came up to write a
new "gdb/configure.nat" file, a la "gdb/configure.tgt", which would
concentrate all of the native settings for each host/system. I
decided to tackle this issue.
The patch is simple. All of the previous Makefile variables that were
being declared inside the *.mh files are now inside "gdb/Makefile.in",
and "gdb/configure" is responsible for AC_SUBST'ing them. The
definitions of these variables were put inside "gdb/configure.nat", so
now they're shell variables. For excerpts of Makefile code, one must
create a file under "gdb/config/${gdb_cpu_host}" and reference it on
the "nat_extra_makefile_frag" variable.
It should now be easier to update the native dependencies of hosts in
this single file.
This has been tested on x86_64 without regressions.
gdb/ChangeLog:
2017-05-06 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in: Remove "@host_makefile_frag@". Add variables
NAT_FILE, NATDEPFILES, NAT_CDEPS, LOADLIBES, MH_CFLAGS, XM_CLIBS,
NAT_GENERATED_FILES, HAVE_NATIVE_GCORE_HOST. Add
"@nat_extra_makefile_frag@".
(Makefile): Remove dependency on "@frags@".
($(GNULIB_BUILDDIR)/Makefile): Likewise.
(data-directory/Makefile): Likewise.
* config/aarch64/linux.mh: Deleted; moved contents to
"gdb/configure.nat".
* config/alpha/alpha-linux.mh: Likewise.
* config/alpha/nbsd.mh: Likewise.
* config/arm/linux.mh: Likewise.
* config/arm/nbsdelf.mh: Likewise.
* config/i386/cygwin.mh: Likewise.
* config/i386/cygwin64.mh: Likewise.
* config/i386/darwin.mh: Likewise.
* config/i386/fbsd.mh: Likewise.
* config/i386/fbsd64.mh: Likewise.
* config/i386/go32.mh: Likewise.
* config/i386/i386gnu.mh: Likewise.
* config/i386/i386sol2.mh: Likewise.
* config/i386/linux.mh: Likewise.
* config/i386/linux64.mh: Likewise.
* config/i386/mingw.mh: Likewise.
* config/i386/mingw64.mh: Likewise.
* config/i386/nbsd64.mh: Likewise.
* config/i386/nbsdelf.mh: Likewise.
* config/i386/nto.mh: Likewise.
* config/i386/obsd.mh: Likewise.
* config/i386/obsd64.mh: Likewise.
* config/i386/sol2-64.mh: Likewise.
* config/ia64/linux.mh: Likewise.
* config/m32r/linux.mh: Likewise.
* config/m68k/linux.mh: Likewise.
* config/m68k/nbsdelf.mh: Likewise.
* config/m68k/obsd.mh: Likewise.
* config/m88k/obsd.mh: Likewise.
* config/mips/fbsd.mh: Likewise.
* config/mips/linux.mh: Likewise.
* config/mips/nbsd.mh: Likewise.
* config/mips/obsd64.mh: Likewise.
* config/pa/linux.mh: Likewise.
* config/pa/nbsd.mh: Likewise.
* config/pa/obsd.mh: Likewise.
* config/powerpc/aix.mh: Likewise.
* config/powerpc/fbsd.mh: Likewise.
* config/powerpc/linux.mh: Likewise.
* config/powerpc/nbsd.mh: Likewise.
* config/powerpc/obsd.mh: Likewise.
* config/powerpc/ppc64-linux.mh: Likewise.
* config/powerpc/spu-linux.mh: Likewise.
* config/s390/linux.mh: Likewise.
* config/sh/nbsd.mh: Likewise.
* config/sparc/fbsd.mh: Likewise.
* config/sparc/linux.mh: Likewise.
* config/sparc/linux64.mh: Likewise.
* config/sparc/nbsd64.mh: Likewise.
* config/sparc/nbsdelf.mh: Likewise.
* config/sparc/obsd64.mh: Likewise.
* config/sparc/sol2.mh: Likewise.
* config/tilegx/linux.mh: Likewise.
* config/vax/nbsdelf.mh: Likewise.
* config/vax/obsd.mh: Likewise.
* config/xtensa/linux.mh: Likewise.
* config/i386/i386gnu.mn: New file, with excerpts from
"config/i386/i386gnu.mh".
* configure: Regenerate.
* configure.ac: Rewrite code to use "gdb/configure.nat" instead of
*.mh files under "gdb/config".
* configure.nat: New file, with contents from the
"gdb/config/*/*.mh" files.
gdb/doc/ChangeLog:
2017-05-06 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile: Remove "@host_makefile_frag@".
This commit adds a new function_view type. This type holds a
non-owning reference to a callable. It is meant to be used as
callback type of functions, instead of using the C-style pair of
function pointer and 'void *data' arguments. function_view allows
passing references to stateful function objects / lambdas with
captures as callbacks efficiently, while function pointer + 'void *'
does not.
See the intro in the new function-view.h header for more.
Unit tests included, put into a new gdb/unittests/ subdir.
gdb/ChangeLog:
2017-02-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS, SUBDIR_UNITTESTS_OBS): New.
(%.o) <unittests/%.c>: New pattern.
* configure.ac ($development): Add $(SUBDIR_UNITTESTS_OBS) to
CONFIG_OBS, and $(SUBDIR_UNITTESTS_SRCS) to CONFIG_SRCS.
* common/function-view.h: New file.
* unittests/function-view-selftests.c: New file.
* configure: Regenerate.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Since GNU make is now required to build GDB, we can remove everything
that checks whether the current make implemention is the GNU one or
not. I simply removed the @GMAKE_TRUE@ prefixes and removed the whole
lines that were prefixed with @GMAKE_FALSE@.
I removed the code in the configure scripts that set those variables.
I also removed the following bits from the configure scripts:
AC_CHECK_PROGS(MAKE, make): GNU make already defines a MAKE variable
internally to be used when invoking Makefiles recursively. I don't see
this variable being used anywhere else (in scripts for example), so I
think it's safe for removal.
AC_PROG_MAKE_SET: This macro defines a SET_MAKE output variable, which
is meant to be used in Makefiles to define the MAKE variable when
using an implementation of make that doesn't already define it.
Since we are now requiring GNU make, we don't need it anymore.
Plus, I don't see SET_MAKE being used anywhere, so I don't think it
was actually doing anything...
gdb/ChangeLog:
* Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
make.
* configure.ac: Remove checks for the make program.
* configure: Re-generate.
gdb/gdbserver/ChangeLog:
* Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
make.
* configure.ac: Remove checks for the make program.
* configure: Re-generate.
gdb/testsuite/ChangeLog:
* Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
make.
* configure.ac: Remove checks for the make program.
* configure: Re-generate.
Use AX_CXX_COMPILE_STDCXX to detect if the compiler supports C++11,
and if -std=xxx switches are necessary to enable C++11.
We need to tweak AX_CXX_COMPILE_STDCXX a bit though. Pristine
upstream AX_CXX_COMPILE_STDCXX appends -std=gnu++11 to CXX directly.
That doesn't work for us, because the top level Makefile passes CXX
down to subdirs, and that overrides whatever gdb/Makefile may set CXX
to. The result would be that a make invocation from the build/gdb/
directory would use "g++ -std=gnu++11" as expected, while a make
invocation at the top level would not.
So instead of having AX_CXX_COMPILE_STDCXX set CXX directly, tweak it
to AC_SUBST a separate variable -- CXX_DIALECT -- and use '$(CXX)
(CXX_DIALECT)' to compile/link.
Confirmed that this enables C++11 starting with gcc 4.8, the first gcc
release with full C++11 support.
Also confirmed that configure errors out gracefully with older GCC
releases:
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features by default... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=gnu++11... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=gnu++0x... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=c++11... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=c++0x... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with +std=c++11... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -h std=c++11... no
configure: error: *** A compiler with support for C++11 language features is required.
Makefile:9451: recipe for target 'configure-gdb' failed
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory '/home/pedro/brno/pedro/gdb/mygit/cxx-convertion/build-gcc-4.7'
If we need to revert back to making C++11 optional, all that's
necessary is to change the "mandatory" to "optional" in configure.ac
and regenerate configure (both gdb and gdbserver).
gdb/ChangeLog:
2016-10-28 Pedro Alves <palves@redhat.com>
* Makefile.in (CXX_DIALECT): Get from configure.
(COMPILE.pre, CC_LD): Append $(CXX_DIALECT).
(FLAGS_TO_PASS): Pass CXX_DIALECT.
* acinclude.m4: Include ax_cxx_compile_stdcxx.m4.
* ax_cxx_compile_stdcxx.m4: Add FSF copyright header. Set and
AC_SUBST CXX_DIALECT instead of changing CXX/CXXCPP.
* configure.ac: Call AX_CXX_COMPILE_STDCXX.
* config.in: Regenerate.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-10-28 Pedro Alves <palves@redhat.com>
* Makefile.in (CXX_DIALECT): Get from configure.
(COMPILE.pre, CC_LD): Append $(CXX_DIALECT).
* acinclude.m4: Include ../ax_cxx_compile_stdcxx.m4.
* configure.ac: Call AX_CXX_COMPILE_STDCXX.
* config.in: Regenerate.
* configure: Regenerate.
This removes all support for building gdb & gdbserver with a C
compiler from gdb & gdbserver's build machinery.
gdb/ChangeLog:
2016-09-05 Pedro Alves <palves@redhat.com>
* NEWS: Mention that a C++ compiler is now required.
* Makefile.in (COMPILER, COMPILER_CFLAGS): Remove.
(COMPILE.pre, CC_LD): Use CXX directly.
(INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly.
* acinclude.m4: Don't include build-with-cxx.m4.
* build-with-cxx.m4: Delete file.
* configure.ac: Remove GDB_AC_BUILD_WITH_CXX call.
* warning.m4: Assume $enable_build_with_cxx is yes.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-09-05 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER, COMPILER_CFLAGS): Remove.
(COMPILE.pre, CC_LD): Use CXX directly.
(INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly.
* acinclude.m4: Don't include build-with-cxx.m4.
* configure.ac: Remove GDB_AC_BUILD_WITH_CXX call.
* configure: Regenerate.
Implement support to add catchpoints for a group of related syscalls
using the syntax:
(gdb) catch syscall group:<group>
or
(gdb) catch syscall g:<group>
Several groups are predefined in the xml files for all architectures
supported by GDB over Linux. They are based on the groups defined by
strace.
gdb/
* xml-syscall.c (get_syscalls_by_group): New.
(get_syscall_group_names): New.
(struct syscall_group_desc): New structure to store group data.
(struct syscalls_info): Include field to store the group list.
(sysinfo_free_syscall_group_desc): New.
(free_syscalls_info): Free group list.
(syscall_group_create_syscall_group_desc): New.
(syscall_group_add_syscall): New.
(syscall_create_syscall_desc): Add syscall to its groups.
(syscall_start_syscall): Load group attribute.
(syscall_group_get_group_by_name): New.
(xml_list_syscalls_by_group): New.
(xml_list_of_groups): New.
* xml-syscall.h (get_syscalls_by_group): Export function
to retrieve a list of syscalls filtered by the group name.
(get_syscall_group_names): Export function to retrieve the list
of syscall groups.
* break-catch-syscall.c (catch_syscall_split_args): Verify if
argument is a syscall group and expand it to a list of syscalls
when creating catchpoints.
(catch_syscall_completer): Add word completion for system call
groups.
* configure.ac: Include dependency for xsltproc when building
in maintainer-mode.
* break-catch-syscall.c (_initialize_breakpoint): Update catch
syscall command documentation.
* NEWS: Include section about catching groups of syscalls.
* configure: Regenerate.
* data-directory/Makefile.in: Generate syscall xml when building
in maintainer mode.
* syscalls/gdb-syscalls.dtd: Include group attribute to the
syscall element.
* syscalls/apply-defaults.xsl: New.
* syscalls/linux-defaults.xml.in: New.
* syscalls/aarch64-linux.xml: Rename to aarch64-linux.xml.in.
* syscalls/amd64-linux.xml: Rename to amd64-linux.xml.in.
* syscalls/arm-linux.xml: Rename to arm-linux.xml.in.
* syscalls/bfin-linux.xml: Rename to bfin-linux.xml.in.
* syscalls/i386-linux.xml: Rename to i386-linux.xml.in.
* syscalls/mips-n32-linux.xml: Rename to mips-n32-linux.xml.in.
* syscalls/mips-n64-linux.xml: Rename to mips-n64-linux.xml.in.
* syscalls/mips-o32-linux.xml: Rename to mips-o32-linux.xml.in.
* syscalls/ppc-linux.xml: Rename to ppc-linux.xml.in.
* syscalls/ppc64-linux.xml: Rename to ppc64-linux.xml.in.
* syscalls/s390-linux.xml: Rename to s390-linux.xml.in.
* syscalls/s390x-linux.xml: Rename to s390x-linux.xml.in.
* syscalls/sparc-linux.xml: Rename to sparc-linux.xml.in.
* syscalls/sparc64-linux.xml: Rename to sparc64-linux.xml.in.
* syscalls/aarch64-linux.xml: Regenerate.
* syscalls/amd64-linux.xml: Regenerate.
* syscalls/arm-linux.xml: Regenerate.
* syscalls/i386-linux.xml: Regenerate.
* syscalls/mips-n32-linux.xml: Regenerate.
* syscalls/mips-n64-linux.xml: Regenerate.
* syscalls/mips-o32-linux.xml: Regenerate.
* syscalls/ppc-linux.xml: Regenerate.
* syscalls/ppc64-linux.xml: Regenerate.
* syscalls/s390-linux.xml: Regenerate.
* syscalls/s390x-linux.xml: Regenerate.
* syscalls/sparc-linux.xml: Regenerate.
* syscalls/sparc64-linux.xml: Regenerate.
gdb/testsuite/
* gdb.base/catch-syscall.exp (do_syscall_tests): Add call
to test_catch_syscall_group.
(test_catch_syscall_group): New.
gdb/doc/
* gdb.texinfo (Set Catchpoints): Add 'group' argument to catch
syscall.
All platforms on FreeBSD use a shared system call table, so use a
single XML file to describe the system calls available on each FreeBSD
platform.
Recent versions of FreeBSD include the identifier of the current
system call when reporting a system call entry or exit event in the
ptrace_lwpinfo structure obtained via PT_LWPINFO in fbsd_wait. As
such, FreeBSD native targets do not use the gdbarch method to fetch
the system call code. In addition, FreeBSD register sets fetched via
ptrace do not include an equivalent of 'orig_rax' (on amd64 for
example), so the system call code cannot be extracted from the
available registers during a system call exit. However, GDB assumes
that system call catch points are not supported if the gdbarch method
is not present. As a workaround, FreeBSD ABIs install a dummy gdbarch
method that throws an internal_error if it is ever invoked.
gdb/ChangeLog:
* configure.ac: Check for support for system call LWP fields on
FreeBSD.
* config.in, configure: Rebuild.
* data-directory/Makefile.in (SYSCALLS_FILES): Add freebsd.xml.
* fbsd-nat.c (fbsd_wait) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
Report system call events.
[HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]
(fbsd_set_syscall_catchpoint): New function.
(fbsd_nat_add_target) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
Set "to_set_syscall_catchpoint" to "fbsd_set_syscall_catchpoint".
* fbsd-tdep.c: Include xml-syscall.h
(fbsd_get_syscall_number): New function.
(fbsd_init_abi): Set XML system call file name.
Add "get_syscall_number" gdbarch method.
* syscalls/freebsd.xml: New file.
GDB needs kinfo_getvmmap() on GNU/kFreeBSD systems same as on
pure FreeBSD. However on these systems the FreeBSD version of libutil
is renamed to libutil-freebsd.
2016-05-23 Jon Boden <jon@ubuntubsd.org>
* configure.ac: Search for libutil-freebsd as alternative to libutil.
* configure: Re-generated.
I wanted to unit test the Rust lexer, so I added a simple unit testing
command to gdb.
The intent is that self tests will only be compiled into gdb in
development mode. In release mode they simply won't exist. So, this
exposes $development to C code as GDB_SELF_TEST.
In development mode, test functions are registered with the self test
module. A test function is just a function that does some checks, and
throws an exception on failure.
Then this adds a new "maint selftest" command which invokes the test
functions, and a new dejagnu test case that invokes it.
2016-05-17 Tom Tromey <tom@tromey.com>
* NEWS: Add "maint selftest" entry.
* selftest.h: New file.
* selftest.c: New file.
* maint.c: Include selftest.h.
(maintenance_selftest): New function.
(_initialize_maint_cmds): Add "maint selftest" command.
* configure.ac (GDB_SELF_TEST): Maybe define.
* config.in, configure: Rebuild.
* Makefile.in (SFILES): Add selftest.c.
(COMMON_OBS): Add selftest.o.
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Maintenance Commands): Document "maint selftest".
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.gdb/unittest.exp: New file.
GDB's use of --dynamic-list to only export the proc-service symbols is
broken due to Python's "python-config --ldflags" saying we should link
with -export-dynamic, causing us to export _all_ extern symbols
anyway. On Fedora 23:
$ python-config --ldflags
-lpython2.7 -lpthread -ldl -lutil -lm -Xlinker -export-dynamic
$ python3.4-config --ldflags
-L/usr/lib64 -lpython3.4m -lpthread -ldl -lutil -lm -Xlinker -export-dynamic
Having GDB export all its symbols leads to issues such as PR gdb/16818
(GDB crashes when using name for target remote hostname:port), where a
GDB symbol unintentionally preempts a symbol in one of the NSS modules
glibc loads into the process. NSS modules should not define symbols
outside the implementation namespace or the relevant standards, but,
alas, that's a longstanding and hard to fix issue. See libc-alpha
discussion at:
[symbol name space issues with NSS modules]
https://sourceware.org/ml/libc-alpha/2016-04/msg00130.html
Python should instead be either using GCC's symbol visibility feature
or -Wl,--dynamic-list as well, to only export Python API symbols, but,
it doesn't. There are bugs open upstream for that:
[Use -Wl,--dynamic-list=x.list, not -Xlinker -export-dynamic]
http://bugs.python.org/issue10112
[Use GCC visibility attrs in PyAPI_*]
http://bugs.python.org/issue11410
But that's taking a long while to resolve.
I thought of working around this Python issue by making GDB build with
-fvisibility=hidden, as Jan suggests in Python issue 10112, as then
Python's "-Xlinker -export-dynamic" has no effect. However, that
would need to be done in the whole source tree (bfd, libiberty, etc.),
and I think that would break GCC plugins, as I believe those have
access to all of GCCs symbols, by "design". So we'd need a new
configure switch, or have the libraries in the tree detect which of
GCC or GDB is being built, but that doesn't work, because the answer
can be "both" with combined builds...
So this patch instead works around Python's bug, by simply sed'ing
away "-Xlinker -export-dynamic" from the result of python-config.py
--ldflags, making -Wl,--dynamic-list work again as it used to. It's
ugly, but so is the bug...
Note that if -Wl,--dynamic-list doesn't work, we always link with
-rdynamic, so static Python should still work.
Tested on F23 with --python=python (Python 2.7) and
--python=python3.4.
gdb/ChangeLog:y
2016-05-03 Pedro Alves <palves@redhat.com>
* configure.ac (PYTHON_LIBS): Sed away "-Xlinker -export-dynamic".
* configure: Regenerate.
The -Wl,--dynamic-list test is currently broken on Fedora 23, when you
configure with --with-python=python3.4. We see:
configure:13741: checking for the dynamic export flag
configure:13796: gcc -o conftest -g3 -O0 -fno-strict-aliasing -DNDEBUG -fwrapv -Wl,--dynamic-list=/home/pedro/gdb/mygit/src/gdb/proc-service.list conftest.c -ldl -lncurses -lm -ldl -lpthread -ldl -lutil -lm -lpython3.4m -Xlinker -export-dynamic >&5
conftest.c:182:30: fatal error: python3.4/Python.h: No such file or directory
compilation terminated.
configure:13796: $? = 1
The correct -I path is in PYTHON_CPPFLAGS:
PYTHON_CPPFLAGS='-I/usr/include/python3.4m -I/usr/include/python3.4m'
(Other Python-related tests in the file are already doing this.)
gdb/ChangeLog:
2016-05-03 Pedro Alves <palves@redhat.com>
* configure.ac (checking for the dynamic export flag): Add
$PYTHON_CPPFLAGS to CPPFLAGS.
* configure: Regenerate.
In some babeltrace versions before 1.2.0, the header file iterator.h
declares the enum values `BT_SEEK_*' within the struct declaration of
bt_iter_pos. The enum values are supposed to be globally-scoped, which
works for C, but not for C++. Later babeltrace versions declare the
enum outside the struct:
https://lists.lttng.org/pipermail/lttng-dev/2013-September/021411.html
Now that GDB is compiled with C++, the GDB build fails on a system with
an affected babeltrace version: the compiler complains about a missing
declaration of BT_SEEK_BEGIN in ctf.c.
This patch enhances the configure check to recognize such babeltrace
versions as unusable for GDB.
gdb/ChangeLog:
* configure.ac: Enhance configure check for babeltrace to reject
non-C++-enabled versions.
* configure: Regenerate.
Using AC_OUTPUT with arguments has been deprecated for some time in
autoconf, even in version 2.64, which we are using. This change should
not affect functionality.
I also removed the "exit 0"'s, they shouldn't be necessary.
gdb/ChangeLog:
* configure.ac: Use AC_CONFIG_FILES instead of passing arguments
to AC_OUTPUT. Remove "exit 0" at the end.
* configure: Regenerate.
gdb/testsuite/ChangeLog:
* configure.ac: Use AC_CONFIG_FILES instead of passing arguments
to AC_OUTPUT.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Use AC_CONFIG_FILES instead of passing arguments
to AC_OUTPUT.
* configure: Regenerate.
Older versions of FreeBSD supported userland threading via a pure
user-space threading library (N threads scheduled on 1 process) and
a N:M model (N threads scheduled on M LWPs). However, modern FreeBSD
versions only support a M:M threading model where each user thread is
backed by a dedicated LWP. This thread target only supports this
threading model. It also uses ptrace to query and alter LWP state
directly rather than using libthread_db to simplify the implementation.
FreeBSD recently gained support for reporting LWP events (birth and death
of LWPs). GDB will use LWP events when present. For older systems it
fetches the list of LWPs in the to_update_thread_list target op to update
the list of threads on each stop.
This target supports scheduler locking by using ptrace to suspend
individual LWPs as necessary before resuming a process.
gdb/ChangeLog:
* configure.ac: Check for support for LWP names on FreeBSD.
* fbsd-nat.c [PT_LWPINFO] New variable debug_fbsd_lwp.
[TDP_RFPPWAIT || HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]
(fbsd_fetch_kinfo_proc): Move function earlier.
[PT_LWPINFO] (fbsd_thread_alive): New function.
[PT_LWPINFO] (fbsd_pid_to_str): New function.
[HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME] (fbsd_thread_name): New function.
[PT_LWP_EVENTS] (fbsd_enable_lwp_events): New function.
[PT_LWPINFO] (fbsd_add_threads): New function.
[PT_LWPINFO] (fbsd_update_thread_list): New function.
[PT_LWPINFO] New variable super_resume.
[PT_LWPINFO] (resume_one_thread_cb): New function.
[PT_LWPINFO] (resume_all_threads_cb): New function.
[PT_LWPINFO] (fbsd_resume): New function.
(fbsd_remember_child): Save full ptid instead of plain pid.
(fbsd_is_child_pending): Return ptid of saved child process.
(fbsd_wait): Include lwp in returned ptid and switch to LWP ptid on
first stop.
[PT_LWP_EVENTS] Handle LWP events.
[TDP_RFPPWAIT] Include LWP in child ptid.
(fbsd_post_startup_inferior) [PT_LWP_EVENTS]: Enable LWP events.
(fbsd_post_attach) [PT_LWP_EVENTS]: Enable LWP events.
Add threads for existing processes.
(fbsd_nat_add_target) [PT_LWPINFO]: Set "to_thread_alive" to
"fbsd_thread_alive".
Set "to_pid_to_str" to "fbsd_pid_to_str".
[HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]: Set "to_thread_name" to
"fbsd_thread_name".
[PT_LWPINFO]: Set "to_update_thread_list" to "fbsd_update_thread_list".
Set "to_has_thread_control" to "tc_schedlock".
Set "to_resume" to "fbsd_resume".
(_initialize_fbsd_nat): New function.
* configure: Regenerate.
* config.in: Regenerate.
gdb/doc/ChangeLog:
* gdb.texinfo (Debugging Output): Document "set/show debug fbsd-lwp".
Include <sys/types.h> as a prerequisite for <machine/reg.h> when checking
for the r_fs and r_gs members in struct reg. Note that the previous test
for <machine/reg.h> already includes <sys/types.h> as a prerequisite.
gdb/ChangeLog:
* configure.ac: Include <sys/types.h when checking for "r_fs" in
"struct reg".
* configure: Regenerate.
The GNU Coding Standards say:
"Please do not include any trademark acknowledgements in GNU
software packages or documentation."
gdb/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
gdb/gdbserver/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
gdb/doc/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
Multitarget builds currently fail when:
(1) simulator support is enabled (the main --target supports target sim)
(2) powerpc is included in the --enable-targets list
(3) powerpc is not the main/default target (--target)
This is because the powerpc sim provides a non-standard API function
sim_spr_register_name which gdb/rs6000-tdep.c utilizes. Since the sim
does not yet support multitarget, only the sim (if one exists) for the
main target is built. When that target isn't powerpc, this function
is not available leading to linking errors:
rs6000-tdep.c:(.text+0x1e34d): undefined reference to
`sim_spr_register_name'
Fix this by only using that API if the sim linked in is the powerpc
sim.
gdb/ChangeLog:
2016-01-05 Pedro Alves <palves@redhat.com>
PR sim/13418
* configure.ac: Define WITH_PPC_SIM when linking in the sim and
the target is powerpc*.
* configure: Regenerate.
* config.in: Regenerate.
Since we now rely on PTRACE_EVENT_CLONE being available (added in
Linux 2.5.46), we're relying on NPTL.
This commit removes the support for older LinuxThreads, as well as the
workarounds for vendor 2.4 kernels with NPTL backported.
- Rely on tkill being available.
- Assume gdb doesn't get cancel signals.
- Remove code that checks the LinuxThreads restart and cancel signals
in the inferior.
- Assume that __WALL is available.
- Assume that non-leader threads report WIFEXITED.
- Thus, no longer need to send signal 0 to check whether threads are
still alive.
- Update comments throughout.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
* configure.ac: Remove tkill checks.
* configure, config.in: Regenerate.
* linux-nat.c: Remove HAVE_TKILL_SYSCALL check. Update top level
comments.
(linux_nat_post_attach_wait): Remove 'cloned' parameter. Use
__WALL.
(attach_proc_task_lwp_callback): Don't set the cloned flag.
(linux_nat_attach): Adjust.
(kill_lwp): Remove HAVE_TKILL_SYSCALL check. No longer fall back
to 'kill'.
(linux_handle_extended_wait): Use __WALL. Don't set the cloned
flag.
(wait_lwp): Use __WALL. Update comments.
(running_callback, stop_and_resume_callback): Delete.
(linux_nat_filter_event): Don't stop and resume all lwps. Don't
check if the event LWP has previously exited.
(check_zombie_leaders): Update comments.
(linux_nat_wait_1): Use __WALL.
(kill_wait_callback): Don't handle clone processes separately.
Use __WALL instead.
(linux_thread_alive): Delete.
(linux_nat_thread_alive): Return true as long as the LWP is in the
LWP list.
(linux_nat_update_thread_list): Assume the kernel supports
PTRACE_EVENT_CLONE.
(get_signo): Delete.
(lin_thread_get_thread_signals): Remove LinuxThreads references.
No longer check __pthread_sig_restart / __pthread_sig_cancel in
the inferior.
* linux-nat.h (struct lwp_info) <cloned>: Delete field.
* linux-thread-db.c: Update comments.
(_initialize_thread_db): Remove LinuxThreads references.
* nat/linux-waitpid.c (my_waitpid): No longer emulate __WALL.
Pass down flags unmodified.
* linux-waitpid.h (my_waitpid): Update documentation.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_kill_one_lwp): Remove references to
LinuxThreads.
(kill_lwp): Remove HAVE_TKILL_SYSCALL check. No longer fall back
to 'kill'.
(linux_init_signals): Delete.
(initialize_low): Adjust.
* thread-db.c (thread_db_init): Remove LinuxThreads reference.
Ref: https://sourceware.org/ml/gdb/2015-12/msg00024.html
We have code in configure.ac that tries to detect whether the compiler
supports each warning and suppress it if not, but that doesn't work
with "-Wno-" options, because gcc doesn't error out for
-Wno-unknown-warning unless other diagnostics are being produced.
See https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html.
Handle this by checking whether -Wfoo works when we actually want
-Wno-foo.
gdb/ChangeLog:
2015-12-16 Pedro Alves <palves@redhat.com>
* configure.ac (compiler warning flags): When testing a
-Wno-foo option, check whether -Wfoo works instead.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2015-12-16 Pedro Alves <palves@redhat.com>
* configure.ac (compiler warning flags): When testing a
-Wno-foo option, check whether -Wfoo works instead.
* configure: Regenerate.
Both x86_64 GNU/Linux and x86_64 mingw-w64 build cleanly with
--enable-targets=all. This enables -Werror by default in C++ mode
too, in order to let the buildbot catch C++ build regressions for us.
gdb/ChangeLog:
2015-11-19 Pedro Alves <palves@redhat.com>
* configure.ac (ERROR_ON_WARNING): Don't check whether in C++
mode.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2015-11-19 Pedro Alves <palves@redhat.com>
* configure.ac (ERROR_ON_WARNING): Don't check whether in C++
mode.
* configure: Regenerate.
Since we're using sighandler_t, nothing else refers to RETSIGTYPE in
gdb.
(Actually, given gdb/remote.c has been assuming signal handlers return
void for a long time, we could have gotten get rid of this even
without gnulib's sighandler_t.)
gdb/ChangeLog:
2015-08-27 Pedro Alves <palves@redhat.com>
* configure.ac: Remove AC_TYPE_SIGNAL call.
* configure, config.in: Regenerate.
Intel(R) Processor Trace support requires a recent linux/perf_event.h header.
When GDB is built on an older system, Intel(R) Processor Trace will not be
available and there is no indication in the configure and build log as to
what went wrong.
Check for a compatible linux/perf_event.h at configure-time.
gdb/
* configure.ac: Check for PERF_ATTR_SIZE_VER5 in linux/perf_event.h
* configure: Regenerate.
This factors the ptrace checks out of gdb's configure.ac to a new
ptrace.m4 file, and then makes gdbserver's configure.ac source it too.
gdb/ChangeLog:
2015-07-24 Pedro Alves <palves@redhat.com>
* acinclude.m4: Include ptrace.m4.
* configure.ac: Call GDB_AC_PTRACE and move ptrace checks ...
* ptrace.m4: ... to this new file.
gdb/gdbserver/ChangeLog:
2015-07-24 Pedro Alves <palves@redhat.com>
* acinclude.m4: Include ../ptrace.m4.
* configure.ac: Call GDB_AC_PTRACE.
* config.in, configure: Regenerate.
Later patches need regex support also in gdbserver.
gdb/ChangeLog
2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Change gdb_regex.h to
common/gdb_regex.h.
(COMMON_OBS): Add gdb_regex.o.
(gdb_regex.o): New.
* common/common.m4 (GDB_AC_COMMON): Add gdb_use_included_regex,
--without-included-regex and USE_INCLUDED_REGEX.
* common/gdb_regex.c: New file from utils.c functions.
* common/gdb_regex.h: Move it here from gdb_regex.h, update include
file wrapping define name.
* configure: Rebuilt.
* configure.ac (gdb_use_included_regex, --without-included-regex)
(USE_INCLUDED_REGEX): Move them to common/common.m4.
* gdb_regex.h: Move it to common/gdb_regex.h.
* utils.c: Remove include gdb_regex.h.
(do_regfree_cleanup, make_regfree_cleanup, get_regcomp_error)
(compile_rx_or_error): Move them to common/gdb_regex.c.
gdb/gdbserver/ChangeLog
2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (OBS): Add gdb_regex.o.
(gdb_regex.o): New.
* config.in: Rebuilt.
* configure: Rebuilt.
Check for libipt, an Intel(R) Processor Trace decoder library. The sources
can be found on github at:
https://github.com/01org/processor-trace
gdb/
* configure.ac: Check for libipt
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in (LIBIPT): New.
(CLIBS): Add $LIBIPT.
* NEWS: document new configure options
Currently building gdb is impossible without an installed termcap or
curses library. But, GDB already has a very minimal termcap in the
tree to handle this situation for Windows -- gdb/stub-termcap.c. This
patch makes that the fallback for all hosts.
Testing this on GNU/Linux (by simply hacking away the termcap/curses
detection in gdb/configure.ac), we trip on:
../readline/libreadline.a(terminal.o): In function `_rl_init_terminal_io':
/home/pedro/gdb/mygit/src/readline/terminal.c:527: undefined reference to `PC'
/home/pedro/gdb/mygit/src/readline/terminal.c:528: undefined reference to `BC'
/home/pedro/gdb/mygit/src/readline/terminal.c:529: undefined reference to `UP'
/home/pedro/gdb/mygit/src/readline/terminal.c:538: undefined reference to `PC'
/home/pedro/gdb/mygit/src/readline/terminal.c:539: undefined reference to `BC'
/home/pedro/gdb/mygit/src/readline/terminal.c:540: undefined reference to `UP'
These are globals that are normally defined by termcap (or ncurses'
termcap emulation).
Now, we could just define replacements in stub-termcap.c, but
readline/terminal.c (at least the copy in our tree) has this:
#if !defined (__linux__) && !defined (NCURSES_VERSION)
# if defined (__EMX__) || defined (NEED_EXTERN_PC)
extern
# endif /* __EMX__ || NEED_EXTERN_PC */
char PC, *BC, *UP;
#endif /* !__linux__ && !NCURSES_VERSION */
which can result in readline defining the globals too. That will
usually work out in C, given that "-fcommon" is usually the default
for C compilers, but that won't work for C++, or C with -fno-common
(link fails with "multiple definition" errors)...
Mirroring those #ifdef conditions in the stub termcap screams
"brittle" to me -- I can see them changing in latter readline
versions.
Work around that by simply using __attribute__((weak)).
Windows/PE/COFF's do support weak, but not on gcc 3.4 based toolchains
(4.8.x does work). Given the file never needed the variables while it
was Windows-only, just continue not defining them there. All other
supported hosts should support this.
gdb/ChangeLog:
2015-04-06 Pedro Alves <palves@redhat.com>
Bernd Edlinger <bernd.edlinger@hotmail.de>
* configure.ac: Remove the mingw32-specific stub-termcap.o
fallback, and instead fallback to the stub termcap on all hosts.
* configure: Regenerate.
* stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
symbols.
IIUC it is a pre-requisite for IPv6 support, some UNICes do not support
getaddrinfo required for IPv6. But coincidentally such UNICes are no longer
really supported by GDB. Therefore it was concluded we can remove all such
UNICes and then we can implement IPv6 easily with getaddrinfo.
In mail
Re: getaddrinfo available on all GDB hosts? [Re: [PATCH v2] Add IPv6 support for remote TCP connections]
Message-ID: <20140211034157.GG5485@adacore.com>
https://sourceware.org/ml/gdb-patches/2014-02/msg00333.html
Joel said:
So I chose HP-UX first for this patch.
gdb/ChangeLog
2014-10-16 Jan Kratochvil <jan.kratochvil@redhat.com>
Remove HPUX.
* Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
(ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
(HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
ia64-hpux-tdep.h, solib-ia64-hpux.h.
(ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
* config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
hppa-hpux-tdep.c.
* config/ia64/hpux.mh: Remove file.
* config/pa/hpux.mh: Remove file.
* configure: Rebuilt.
* configure.ac (dlgetmodinfo, somread.o): Remove.
* configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
(ia64-*-hpux*): Remove its float format exception.
* configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
* hppa-hpux-nat.c: Remove file.
* hppa-hpux-tdep.c: Remove file.
* hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
Move them here from hppa-tdep.h
(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
(hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
* hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
Move them to hppa-tdep.c.
(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
declarations.
* ia64-hpux-nat.c: Remove file.
* ia64-hpux-tdep.c: Remove file.
* ia64-hpux-tdep.h: Remove file.
* inf-ttrace.c: Remove file.
* inf-ttrace.h: Remove file.
* solib-ia64-hpux.c: Remove file.
* solib-ia64-hpux.h: Remove file.
* solib-pa64.c: Remove file.
* solib-pa64.h: Remove file.
* solib-som.c: Remove file.
* solib-som.h: Remove file.
* somread.c: Remove file.
Use kinfo_getvmmap from libutil on FreeBSD to enumerate memory
regions in a running process instead of /proc/<pid>/map. FreeBSD systems
do not mount procfs by default, but kinfo_getvmmap uses a sysctl that
is always available.
Skip memory regions for devices as well as regions an application has
requested to not be dumped via the MAP_NOCORE flag to mmap or
MADV_NOCORE advice to madvise.
gdb/ChangeLog:
* configure.ac: AC_CHECK_LIB(util, kinfo_getvmmap).
* configure: Regenerate.
* config.in: Regenerate.
* fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
define.
(fbsd_find_memory_regions): Use kinfo_getvmmap to
enumerate memory regions if present.
gdb/ChangeLog:
* guile/guile.c (_initialize_guile): Disable automatic
finalization, if Guile offers us that possibility.
* guile/guile.c (call_initialize_gdb_module):
* guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
finalizers in appropriate places.
* config.in (HAVE_GUILE_MANUAL_FINALIZATION): New definition.
* configure.ac (AC_TRY_LIBGUILE): Add a check for
scm_set_automatic_finalization_enabled.
* configure: Regenerated.
Whoops, these are C specific, but I somehow missed the warnings before:
cc1plus: warning: command line option ‘-Wmissing-prototypes’ is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option ‘-Wdeclaration-after-statement’ is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option ‘-Wmissing-parameter-type’ is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option ‘-Wold-style-declaration’ is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option ‘-Wold-style-definition’ is valid for C/ObjC but not for C++ [enabled by default]
gdb/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* configure.ac (build_warnings): Move -Wmissing-prototypes
-Wdeclaration-after-statement -Wmissing-parameter-type
-Wold-style-declaration -Wold-style-definition to the C-specific
set.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* configure.ac (build_warnings): Move
-Wdeclaration-after-statement to the C-specific set.
* configure: Regenerate.
This new option, disabled by default for now, allows specifying
whether to build GDB, GDBserver, and friends with a C++ (98/03)
compiler.
The name of the switch should be familiar to those who followed GCC's
own C++ conversion process.
. Adding -fpermissive to COMPILER in C++ mode (see the new
build-with-cxx.m4 file) makes errors like these be warnings instead:
gdb/infrun.c:6597:1: error: initializing argument 1 of ‘void sig_print_info(gdb_signal)’ [-fpermissive]
sig_print_info (enum gdb_signal oursig)
^
gdb/infrun.c: In function ‘void do_restore_infcall_suspend_state_cleanup(void*)’:
gdb/infrun.c:7164:39: error: invalid conversion from ‘void*’ to ‘infcall_suspend_state*’ [-fpermissive]
restore_infcall_suspend_state (state);
^
so that the compiler carries on compiling the file. -Werror still
catches the warnings, so nothing is lost, only our lifes are made
easier by concentrating on getting other more important things out of
the way first.
There's no way to quiet those warnings. Until they're all fixed, when
building in C++ mode, -Werror is disabled by default.
. Adding -Wno-narrowing suppresses thousands of instances of this warning:
gdb/arm-linux-tdep.c:439:1: error: narrowing conversion of ‘-1’ from ‘int’ to ‘ULONGEST {aka long unsigned int}’ inside { } is ill-formed in C++11 [-Werror=narrowing]
gdb/arm-linux-tdep.c:439:1: error: narrowing conversion of ‘-1l’ from ‘LONGEST {aka long int}’ to ‘ULONGEST {aka long unsigned int}’ inside { } is ill-formed in C++11 [-Werror=narrowing]
gdb/arm-linux-tdep.c:450:1: error: narrowing conversion of ‘-1’ from ‘int’ to ‘ULONGEST {aka long unsigned int}’ inside { } is ill-formed in C++11 [-Werror=narrowing]
We can defer handling those until we target C++11.
. Adding -Wno-sign-compare suppresses thousands of instances of this warning:
gdb/linux-record.c:1763:32: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
if (tmpulongest == tdep->fcntl_F_GETLK64)
^
. Adding -Wno-write-strings suppresses thousands of instances of this warning:
gdb/mi/mi-cmd-var.c: In function ‘void mi_cmd_var_show_attributes(char*, char**, int)’:
gdb/mi/mi-cmd-var.c:514:12: warning: deprecated conversion from string constant to ‘char*’ [-Wwrite-strings]
attstr = "editable";
^
gdb/mi/mi-cmd-var.c:516:12: warning: deprecated conversion from string constant to ‘char*’ [-Wwrite-strings]
attstr = "noneditable";
^
For now, it's best to hide these warnings from view until we're
'-fpermissive'-clean, and can thus start building with -Werror.
The C compiler has always managed to build working GDBs with these
issues in the code, so a C++ compiler should too.
gdb/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER): New, get it from autoconf.
(COMPILE.pre, CC_LD): Use COMPILER.
(CXX): Get from autoconf instead.
(CXX_FOR_TARGET): Default to g++ instead of gcc.
* acinclude.m4: Include build-with-cxx.m4.
* build-with-cxx.m4: New file.
* configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
Disable -Werror by default if building in C++ mode.
(build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
-Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
Run supported-warning-flags tests with the C++ compiler.
Save/restore CXXFLAGS too.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER): New, get it from autoconf.
(CXX): Get from autoconf instead.
(COMPILE.pre): Use COMPILER.
(CC-LD): Rename to ...
(CC_LD): ... this. Use COMPILER.
(gdbserver$(EXEEXT), gdbreplay$(EXEEXT), $(IPA_LIB)): Adjust.
(CXX_FOR_TARGET): Default to g++ instead of gcc.
* acinclude.m4: Include build-with-cxx.m4.
* configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
Disable -Werror by default if building in C++ mode.
(build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
-Wno-narrowing in C++ mode. Run supported-warning-flags tests with
the C++ compiler. Save/restore CXXFLAGS too.
* configure: Regenerate.
Converting GDB to be a C++ program, I stumbled on 'basename' issues,
like:
src/gdb/../include/ansidecl.h:169:64: error: new declaration ‘char* basename(const char*)’
/usr/include/string.h:597:26: error: ambiguates old declaration ‘const char* basename(const char*)’
which I believe led to this bit in gold's configure.ac:
dnl We have to check these in C, not C++, because autoconf generates
dnl tests which have no type information, and current glibc provides
dnl multiple declarations of functions like basename when compiling
dnl with C++.
AC_CHECK_DECLS([basename, ffs, asprintf, vasprintf, snprintf, vsnprintf, strverscmp])
These checks IIUC intend to generate all the HAVE_DECL_FOO symbols
that libiberty.h and ansidecl.h check.
GDB is missing these checks currently, which results in the conflict
shown above.
This adds an m4 file that both GDB and GDBserver's configury use to
pull in the autoconf checks that libiberty clients needs done in order
to use these libiberty.h/ansidecl.h.
gdb/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* libiberty.m4: New file.
* acinclude.m4: Include libiberty.m4.
* configure.ac: Call libiberty_INIT.
* config.in, configure: Regenerate.
gdb/gdbserver/
2015-02-27 Pedro Alves <palves@redhat.com>
* acinclude.m4: Include libiberty.m4.
* configure.ac: Call libiberty_INIT.
* config.in, configure: Regenerate.
Preparation for using this on all hosts.
Confirmed that --host=x86_64-w64-mingw32 still builds the stub
termcap.
gdb/ChangeLog:
2015-02-26 Pedro Alves <palves@redhat.com>
* windows-termcap.c: Rename to ...
* stub-termcap.c: ... this. Adjust header line.
* Makefile.in (SFILES): Refer to stub-termcap.c instead of
windows-termcap.c.
* configure: Regenerate.
* configure.ac: Refer to stub-termcap.o instead of
windows-termcap.o.
* gdb_curses.h: Mention stub-termcap.c instead of
windows-termcap.c.
This patch introduces a new M4 macro GDB_AC_TRANSFORM to avoid repeating
the common idiom which is the transformation of target program names,
i.e. from gdb to sparc64-linux-gnu-gdb. It also makes gdb/configure.ac
and gdb/testsuite/configure.ac to use the new macro.
gdb/ChangeLog:
2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure: Regenerated.
* configure.ac: Use GDB_AC_TRANSFORM.
* Makefile.in (aclocal_m4_deps): Added transform.m4.
* acinclude.m4: sinclude transform.m4.
* transform.m4: New file.
(GDB_AC_TRANSFORM): New macro.
gdb/testsuite/ChangeLog:
2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure: Regenerated.
* configure.ac: Use GDB_AC_TRANSFORM.
* aclocal.m4: sinclude ../transform.m4.
This patch adds a new type of probe to GDB: the DTrace USDT probes. The new
type is added by providing functions implementing all the entries of the
`probe_ops' structure defined in `probe.h'. The implementation is
self-contained and does not depend on DTrace source code in any way.
gdb/ChangeLog:
2015-02-7 Jose E. Marchesi <jose.marchesi@oracle.com>
* breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
the -probe-dtrace new vpossible value for PROBE_MODIFIER.
* configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
handle ELF files.
* Makefile.in (SFILES): dtrace-probe.c added.
* configure: Regenerate.
* dtrace-probe.c: New file.
(SHT_SUNW_dof): New constant.
(dtrace_probe_type): New enum.
(dtrace_probe_arg): New struct.
(dtrace_probe_arg_s): New typedef.
(struct dtrace_probe_enabler): New struct.
(dtrace_probe_enabler_s): New typedef.
(dtrace_probe): New struct.
(dtrace_probe_is_linespec): New function.
(dtrace_dof_sect_type): New enum.
(dtrace_dof_dofh_ident): Likewise.
(dtrace_dof_encoding): Likewise.
(DTRACE_DOF_ENCODE_LSB): Likewise.
(DTRACE_DOF_ENCODE_MSB): Likewise.
(dtrace_dof_hdr): New struct.
(dtrace_dof_sect): Likewise.
(dtrace_dof_provider): Likewise.
(dtrace_dof_probe): Likewise.
(DOF_UINT): New macro.
(DTRACE_DOF_PTR): Likewise.
(DTRACE_DOF_SECT): Likewise.
(dtrace_process_dof_probe): New function.
(dtrace_process_dof): Likewise.
(dtrace_build_arg_exprs): Likewise.
(dtrace_get_arg): Likewise.
(dtrace_get_probes): Likewise.
(dtrace_get_probe_argument_count): Likewise.
(dtrace_can_evaluate_probe_arguments): Likewise.
(dtrace_evaluate_probe_argument): Likewise.
(dtrace_compile_to_ax): Likewise.
(dtrace_probe_destroy): Likewise.
(dtrace_gen_info_probes_table_header): Likewise.
(dtrace_gen_info_probes_table_values): Likewise.
(dtrace_probe_is_enabled): Likewise.
(dtrace_probe_ops): New variable.
(info_probes_dtrace_command): New function.
(_initialize_dtrace_probe): Likewise.
(dtrace_type_name): Likewise.
When GDB is configured with "--without-tui --with-curses" or "--with-tui",
$prefer_curses is set to yes. But, that still doesn't mean that curses
will be used. configure will still search for the curses library, and
continue building without it. That's done here:
curses_found=no
if test x"$prefer_curses" = xyes; then
...
AC_SEARCH_LIBS(waddstr, [ncurses cursesX curses])
if test "$ac_cv_search_waddstr" != no; then
curses_found=yes
fi
fi
So if waddstr is not found, meaning curses is not really
available, even though it'd be preferred, $prefer_curses is
'yes', but $curses_found is 'no'.
So the right fix to tell whether we're linking with curses is
$curses_found=yes.
gdb/ChangeLog:
2015-01-22 Pedro Alves <palves@redhat.com>
* configure.ac [*mingw32*]: Check $curses_found instead of
$prefer_curses.
* configure: Regenerate.
* windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
HAVE_NCURSES_NCURSES_H checks.
gdb/
2015-01-17 Eli Zaretskii <eliz@gnu.org>
* configure.ac [*mingw32*]: Only add windows-termcap.o to
CONFIG_OBS if not building with a curses library.
* configure: Regenerate.
* windows-termcap.c: Include defs.h. Make the whole body empty if
either one of HAVE_CURSES_H or HAVE_NCURSES_H or
HAVE_NCURSES_NCURSES_H is defined.
