The former two are unused anyway. And having such constants isn't very
helpful either, when they live in a place where updating the register
table wouldn't even allow noticing the need to adjust these constants.
st(1) ... st(7) will never be looked up in the hash table, so there's no
point inserting the entries. It's also not really necessary to do a 2nd
hash lookup after parsing the register number, nor is there a real
reason for having both st and st(0) entries. Plus we can easily do away
with the need for st to be first in the table.
There's no need for the extra level of indirection and the extra storage
needed for the pointer, pointing from one piece of static data to
another. Key checking of rounding being in effect off of the type field
of the structure instead.
There's no need for the extra level of indirection and the extra storage
needed for the pointer, pointing from one piece of static data to
another. Key checking of broadcast being in effect off of the type field
of the structure instead.
There's no need for the extra level of indirection and the extra storage
needed for the pointer, pointing from one piece of static data to
another. Key checking of masking being in effect off of the register
field of the structure instead.
All callers pass unsigned values (in some cases by virtue of passing
non-negative literal numbers).
This in turn requires struct {Mask,RC,Broadcast}_Operation's "operand"
fields to become unsigned, in turn allowing to reduce the amount of
casting needed (the two new casts that are necessary cast _to_
"unsigned" instead of _from_, as that's the form that'll never case
undefined behavior).
Just like is already done for VEX/XOP/EVEX encoded insns, record the
encoding space information in the respective opcode modifier field. Do
this again without changing the source table, but rather by deriving the
values from their existing source representation.
In match_template() i.tm hasn't been filled yet, so it is necessarily t
which needs checking. This is only a latent issue as no other templates
with the same base_opcode have an extension_opcode of 1.
For INVLPGB the operand count was wrong (besides %edx there's also %ecx
which is an input to the insn). In this case I see little sense in
retaining the bogus 2-operand template. Plus swapping of the operands
wasn't properly suppressed for Intel syntax.
For PVALIDATE, RMPADJUST, and RMPUPDATE bogus single operand templates
were specified. These get retained, as the address operand is the only
one really needed to expressed non-default address size, but only for
compatibility reasons. Proper multi-operand insn get introduced and the
testcases get adjusted / extended accordingly.
While at it also drop the redundant definition of __amd64__ - we already
have x86_64 defined (or not) to distinguish 64-bit and non-64-bit cases.
This is only a partial fix for PR/gas 27419, in that it limits the bad
behavior of accepting mismatched operands to just x32 mode. The full fix
would be to revert commits 27f134698a and b3a3496f83, and to address
the issue in gcc instead.
In the majority of cases we can easily determine the length from the
encoding, irrespective of whether a prefix is specified there as well.
We further don't even need to record the value in the table entries, as
it's easy enough to determine it (without any guesswork, unless an insn
with major opcode 00 appeared that requires a 2nd opcode byte to be
specified explicitly) when installing the chosen template for further
processing.
Should an encoding appear which
- has a major opcode byte of 66, F3, or F2,
- requires a 2nd opcode byte to be specified explicitly,
- doesn't have a mandatory prefix
we'd need to convert all templates presently encoding a mandatory prefix
this way to the Prefix_0X<nn> model to eliminate the respective guessing
i386-gen does.
Just like is already done for legacy encoded insns, record the mandatory
prefix information in the respective opcode modifier field. Do this
without changing the source table, but rather by deriving the values from
their existing source representation.
This is in preparation of opcode_length going away as a field in the
templates. Identify pseudo prefixes by a base opcode of zero instead:
No real prefix has an opcode of zero. This at the same time allows
dropping a curious special case from i386-gen.
Since most attributes are identical for all pseudo prefixes, take the
opportunity and also template them.
In preparation to use PREFIX_0X<nn> attributes also in VEX/XOP/EVEX
encoding templates, renumber the pseudo-enumerators such that their
values can then also be used directly in the respective prefix bit
fields.
Commit 8b65b8953a ("x86: Remove the prefix byte from non-VEX/EVEX
base_opcode") used the opcodeprefix field for two distinct purposes. In
preparation of having VEX/XOP/EVEX and non-VEX templates become similar
in the representatioon of both encoding space and opcode prefixes, split
the field to have a separate one holding an insn's opcode space.
Commit 8b65b8953a ("x86: Remove the prefix byte from non-VEX/EVEX
base_opcode") dropped the mandatory prefix bytes from legacy encoded
insn templates, but failed to also adjust affected MPX-specific checks
in two places.
For the expressions to remain halfway readable, introduce local
variables to hold current_templates->start.
Add support for TLS in XCOFF. Amongst the things done by this commit:
- Update XCOFF auxialiary header to match new version and allow TLS
sections.
- Add TLS sections (.tdata and .tbss) support in gas and ld.
- Add support for the TLS relocations in gas and ld.
Two different types BFD_RELOC are created for PPC and PPC64 as
the size is a pointer, thus distinct in 32 or 64bit.
The addresses given by ld to .tdata and .tbss is a bit special. In
XCOFF, these addresses are actually offsets from the TLS pointer
computed at runtime. AIX assembly and linker does the same. In
top of that, the .tdata must be before .data (this is mandatory for AIX
loader). Thus, the aix ld script is recomputing "." before .data to restore
its original value. There might be a simpler way, but this one is working.
Optimisation linked to TLS relocations aren't yet implemented.
bfd/
* reloc.c (BFD_RELOC_PPC_TLS_LE, BFD_RELOC_PPC_TLS_IE,
BFD_RELOC_PPC_TLS_M, BFD_RELOC_PPC_TLS_ML, BFD_RELOC_PPC64_TLS_GD,
BFD_RELOC_PPC64_TLS_LD, BFD_RELOC_PPC64_TLS_LE,
BFD_RELOC_PPC64_TLS_IE, BFD_RELOC_PPC64_TLS_M,
BFD_RELOC_PPC64_TLS_ML): New relocations.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* coff-rs6000.c (xcoff_calculate_relocation): Call
xcoff_reloc_type_tls for TLS relocations.
(xcoff_howto_table): Implement TLS relocations.
(_bfd_xcoff_reloc_type_lookup): Add cases TLS relocations.
(xcoff_reloc_type_tls): New function.
* coff64-rs6000.c (xcoff_calculate_relocation): Likewise.
(xcoff_howto_table): Likewise.
(_bfd_xcoff_reloc_type_lookup): Likewise.
* coffcode.h (sec_to_styp_flags): Handle TLS sections.
(styp_to_sec_flags): Likewise.
(coff_compute_section_file_positions): Avoid file offset
optimisation for .data when the previous section is .tdata.
(coff_write_object_contents): Handle TLS sections.
* coffswap.h (coff_swap_aouthdr_out): Add support for
new fields in aouthdr.
* libxcoff.h (xcoff_reloc_type_tls): Add prototype.
* xcofflink.c (xcoff_link_add_symbols): Handle XMC_UL.
(xcoff_need_ldrel_p): Add cases for TLS relocations.
(xcoff_create_ldrel): Add l_symndx for TLS sections.
gas/
* config/tc-ppc.c (ppc_xcoff_text_section, ppc_xcoff_data_section,
(ppc_xcoff_bss_section, ppc_xcoff_tdata_section,
(ppc_xcoff_tbss_section): New variables.
(ppc_text_subsegment, ppc_text_csects, ppc_data_subgments,
(ppc_data_csects): Removed.
(ppc_xcoff_section_is_initialized, ppc_init_xcoff_section,
ppc_xcoff_parse_cons): New functions.
(md_being): Initialize XCOFF sections.
(ppc_xcoff_suffix): Add support for TLS relocations
(fixup_size, md_apply_fix): Add support for new BFD_RELOC.
(ppc_change_csect): Handle XMC_TL, XMC_UL. Correctly, add XMC_BS
to .bss section. Handle new XCOFF section variables.
(ppc_comm): Likewise.
(ppc_toc): Likewise.
(ppc_symbol_new_hook): Likewise.
(ppc_frob_symbol): Likewise.
(ppc_fix_adjustable): Add tbss support.
* config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): New define.
(ppc_xcoff_parse_cons): Add prototype.
(struct ppc_xcoff_section): New structure.
ld/
* emultempl/aix.em: Ensure .tdata section is removed
if empty, even with -r flag.
* scripttempl/aix.sc: Handle TLS sections.
* testsuite/ld-powerpc/aix52.exp: Add new tests.
* testsuite/ld-powerpc/aix-tls-reloc-32.d: New test.
* testsuite/ld-powerpc/aix-tls-reloc-64.d: New test.
* testsuite/ld-powerpc/aix-tls-reloc.ex: New test.
* testsuite/ld-powerpc/aix-tls-reloc.s: New test.
* testsuite/ld-powerpc/aix-tls-section-32.d: New test.
* testsuite/ld-powerpc/aix-tls-section-64.d: New test.
* testsuite/ld-powerpc/aix-tls-section.ex: New test.
* testsuite/ld-powerpc/aix-tls-section.s: New test.
include/
* coff/internal.h (struct internal_aouthdr): Add new fields.
* coff/rs6000.h (AOUTHDRÃ): Add new fields.
* coff/rs6k64.h (struct external_filehdr): Likewise.
* coff/xcoff.h (_TDATA), _TBSS): New defines
(RS6K_AOUTHDR_TLS_LE, RS6K_AOUTHDR_RAS, RS6K_AOUTHDR_ALGNTDATA,
RS6K_AOUTHDR_SHR_SYMTAB, RS6K_AOUTHDR_FORK_POLICY,
RS6K_AOUTHDR_FORK_COR): New defines.
(XMC_TU): Removed.
(XMC_UL): New define.
Implement support for largetoc on XCOFF.
R_TOCU and R_TOCL are referenced by the new BFD defines:
BFD_RELOC_PPC_TOC16_HI and BFD_RELOC_PPC_TOC16_LO.
A new toc storage class is added XMC_TE.
In order to correctly handle R_TOCU, the logic behind
xcoff_reloc_type_toc is changed to compute the whole TOC offset
instead of just the difference between the "link" offset and the
"assembly" offset.
In gas, add a function to transform addis format used by AIX
"addis RT, D(RA)" into the ELF format "addis RT, RA, SI".
bfd/
* reloc.c (BFD_RELOC_PPC_TOC16_HI, BFD_RELOC_PPC_TOC16_LO):
New relocations.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* coff-rs6000.c (xcoff_calculate_relocation): Call
xcoff_reloc_type_toc for R_TOCU and R_TOCL.
(xcoff_howto_table): Remove src_mask for TOC relocations.
Add R_TOCU and R_TOCL howtos.
(_bfd_xcoff_reloc_type_lookup): Add cases for
BFD_RELOC_PPC_TOC16_HI and BFD_RELOC_PPC_TOC16_LO.
(xcoff_reloc_type_toc): Compute the whole offset.
Implement R_TOCU and R_TOCL.
* coff64-rs6000.c (xcoff64_calculate_relocation):
Likewise.
(xcoff64_howto_table): Likewise.
(xcoff64_reloc_type_lookup): Likewise.
gas/
* config/tc-ppc.c (ppc_xcoff_suffix): New function.
(MAP, MAP32, MAP64): New macros for XCOFF.
(ppc_xcoff_fixup_addis): New function.
(ppc_is_toc_sym): Handle XMC_TE.
(fixup_size): Add cases for BFD_RELOC_PPC_TOC16_HI and
BFD_RELOC_PPC_TOC16_LO.
(md_assemble): Call ppc_xcoff_fixup_addis for XCOFF.
(ppc_change_csect): Handle XMC_TE.
(ppc_tc): Enable .tc symbols to have only a XMC_TC or XMC_TE
storage class.
(ppc_symbol_new_hook): Handle XMC_TE.
(ppc_frob_symbol): Likewise.
(ppc_fix_adjustable): Likewise.
(md_apply_fix): Handle BFD_RELOC_PPC_TOC16_HI and
BFD_RELOC_PPC_TOC16_LO.
ld/
* scripttempl/aix.sc: Add .te to .data section.
* testsuite/ld-powerpc/aix52.exp: Add test structure for AIX7+.
Add aix-largetoc-1 test.
* testsuite/ld-powerpc/aix-largetoc-1-32.d: New test.
* testsuite/ld-powerpc/aix-largetoc-1-64.d: New test.
* testsuite/ld-powerpc/aix-largetoc-1.ex: New test.
* testsuite/ld-powerpc/aix-largetoc-1.s: New test.
RepPrefixOk, HLEPrefixOk, and NoTrackPrefixOk can't be specified
together, so can share an enum-like field. IsLockable can be inferred
from HLE setting and hence only needs specifying when neither of them
is present.
PR 27411
* config/tc-arm.c (do_t_add_sub): Correct error message.
* testsuite/gas/arm/pr27411.s: New test.
* testsuite/gas/arm/pr27411.d: New test driver.
* testsuite/gas/arm/pr27411.l: Expected error output for new test.
A number of targets, bfin, rl78, rx, can show odd failures when
bfd/reloc.c changes BFD_RELOC_* enum values, if recompiling over a
build dir with existing objects. The problem is caused by
bfin-parse.o and similar not being recompiled and so using stale
BFD_RELOC_* values. This isn't fixed by making bfin-parse.c depend on
bfd/reloc.c, which isn't necessary anyway. bfin-parse.o should have
been recompiled due to bfd/bfd.h changing when extracted bfd/reloc.c
BFD_RELOC_* values change, but that wasn't happening. The problem is
that automake generates a makefile that loads gas/config/.deps/
dependency file for objects with corresponding sources mentioned in
EXTRA_as_new_SOURCES. Unless we want to mess around generating
explicit dependencies, I think that mean moving some object files to
the build gas/config/. This patch does that, removing some hacks for
m68k-parse.c that should no longer be necessary, and removes some
rules that catered to old bison producing code that triggers compiler
warnings.
PR 23691
* Makefile.am (TARGET_CPU_CFILES): Split off config/xtensa-relax.c..
(TARGET_CPU_HFILES): ..and config/xtensa-relax.h..
(TARGET_EXTRA_FILES): ..to here. Add config/bfin-lex-wrapper.c,
and use alongside TARGET_CPU_CFILES.
(EXTRA_DIST): Update location of generated .c files.
(config/m68k-parse.c): New rule replacing m68k-parse.c rule.
(config/bfin-parse.c, config/rl78-parse.cm config/rx-parse.c),
(config/bfin-lex.c, config/bfin-lex-wrapper.@OBJEXT@): Similarly.
(itbl-lex-wrapper.@OBJEXT@): Simplify to just the needed
dependencies.
(itbl-parse.@OBJEXT@): Delete rule using NO_WERROR.
(itbl-parse.c, itbl-parse.h): Tidy.
* config/bfin-lex-wrapper.c: Include config/bfin-lex.c.
* config/bfin-lex.l: Include config/bfin-parse.h.
* configure.ac (extra_objects): Move object files corresponding
to .y and .l files now in config/ to config/.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
Make the opcode/riscv-opc.c and include/opcode/riscv.h tidy, move the
spec versions stuff to bfd/cpu-riscv.h. Also move the csr stuff and
ext_version_table to gas/config/tc-riscv.c for internal use. To avoid
too many repeated code, define general RISCV_GET_SPEC_NAME/SPEC_CLASS
macros. Therefore, assembler/dis-assembler/linker/gdb can get all spec
versions related stuff from cpu-riscv.h and cpu-riscv.c, since the stuff
are defined there uniformly.
bfd/
* Makefile.am: Added cpu-riscv.h.
* Makefile.in: Regenerated.
* po/SRC-POTFILES.in: Regenerated.
* cpu-riscv.h: Added to support spec versions controlling.
Also added extern arrays and functions for cpu-riscv.c.
(enum riscv_spec_class): Define all spec classes here uniformly.
(struct riscv_spec): Added for all specs.
(RISCV_GET_SPEC_CLASS): Added to reduce repeated code.
(RISCV_GET_SPEC_NAME): Likewise.
(RISCV_GET_ISA_SPEC_CLASS): Added to get ISA spec class.
(RISCV_GET_PRIV_SPEC_CLASS): Added to get privileged spec class.
(RISCV_GET_PRIV_SPEC_NAME): Added to get privileged spec name.
* cpu-riscv.c (struct priv_spec_t): Replaced with struct riscv_spec.
(riscv_get_priv_spec_class): Replaced with RISCV_GET_PRIV_SPEC_CLASS.
(riscv_get_priv_spec_name): Replaced with RISCV_GET_PRIV_SPEC_NAME.
(riscv_priv_specs): Moved below.
(riscv_get_priv_spec_class_from_numbers): Likewise, updated.
(riscv_isa_specs): Moved from include/opcode/riscv.h.
* elfnn-riscv.c: Included cpu-riscv.h.
(riscv_merge_attributes): Initialize in_priv_spec and out_priv_spec.
* elfxx-riscv.c: Included cpu-riscv.h and opcode/riscv.h.
(RISCV_UNKNOWN_VERSION): Moved from include/opcode/riscv.h.
* elfxx-riscv.h: Removed extern functions to cpu-riscv.h.
gas/
* config/tc-riscv.c: Included cpu-riscv.h.
(enum riscv_csr_clas): Moved from include/opcode/riscv.h.
(struct riscv_csr_extra): Likewise.
(struct riscv_ext_version): Likewise.
(ext_version_table): Moved from opcodes/riscv-opc.c.
(default_isa_spec): Updated type to riscv_spec_class.
(default_priv_spec): Likewise.
(riscv_set_default_isa_spec): Updated.
(init_ext_version_hash): Likewise.
(riscv_init_csr_hash): Likewise, also fixed indent.
include/
* opcode/riscv.h: Moved stuff and make the file tidy.
opcodes/
* riscv-dis.c: Included cpu-riscv.h, and removed elfxx-riscv.h.
(default_priv_spec): Updated type to riscv_spec_class.
(parse_riscv_dis_option): Updated.
* riscv-opc.c: Moved stuff and make the file tidy.
Since SHF_GNU_RETAIN is allowed on all sections, strip SHF_GNU_RETAIN
when checking incorrect section attributes.
PR gas/27412
* config/obj-elf.c (obj_elf_change_section): Strip SHF_GNU_RETAIN
when checking incorrect section attributes.
* testsuite/gas/elf/elf.exp: Run section28 and section29.
* testsuite/gas/elf/section28.d: New file.
* testsuite/gas/elf/section28.s: Likewise.
* testsuite/gas/elf/section29.d: Likewise.
* testsuite/gas/elf/section29.s: Likewise.
This undoes a change to md_assemble() that 32930e4edb ("x86: Support
GNU_PROPERTY_X86_ISA_1_V[234] marker") did without any explanation. This
broke a CVTPI2PS property test that a subsequent test will add, and the
updates to existing tests also demonstrate what was wrong: For example,
AVX insns update the full YMM, even if a Vex128 variant is in use.
VZERO{ALL,UPPER} modify YMM registers despite having no operands.
While {,V}{LD,ST}MXCSR don't modify XMM registers, MXCSR and XMMn
collectively form underlying machine state.
opcodes/
* s390-mkopc.c (main): Accept arch14 as cpu string.
* s390-opc.txt: Add new arch14 instructions.
include/
* opcode/s390.h (enum s390_opcode_cpu_val): Add
S390_OPCODE_ARCH14.
gas/
* config/tc-s390.c (s390_parse_cpu): New entry for arch14.
* doc/c-s390.texi: Document arch14 march option.
* testsuite/gas/s390/s390.exp: Run the arch14 related tests.
* testsuite/gas/s390/zarch-arch14.d: New test.
* testsuite/gas/s390/zarch-arch14.s: New test.
GCC 11 passes --gdwarf-5 to assembler to enable DWARF5 debug info. Don't
disable relaxation when --gdwarf-N is specified. The assembler generated
debug information will treat the sequence of the relaxed instructions as
a single instruction.
PR gas/27243
* config/tc-nios2.c (md_begin): Don't disable relaxation with
--gdwarf-N.
* testsuite/gas/nios2/relax.d: New file.
* testsuite/gas/nios2/relax.s: Likewise.
Fix a NULL dereference seen when assembling invalid input.
PR 27198
* config/tc-i386.c (need_plt32_p): Return FALSE for NULL symbol.
* testsuite/gas/i386/pr27198.d,
* gas/testsuite/gas/i386/pr27198.err,
* gas/testsuite/gas/i386/pr27198.s: New test.
* gas/testsuite/gas/i386/i386.exp: Run it.
bfd/
* elfnn-riscv.c: Indent, labels and GNU coding standards tidy,
also aligned the code.
gas/
* config/tc-riscv.c: Indent and GNU coding standards tidy,
also aligned the code.
* config/tc-riscv.h: Likewise.
include/
* opcode/riscv.h: Indent and GNU coding standards tidy,
also aligned the code.
opcodes/
* riscv-opc.c (riscv_gpr_names_abi): Aligned the code.
(riscv_fpr_names_abi): Likewise.
(riscv_opcodes): Likewise.
(riscv_insn_types): Likewise.
Error and warning messages usually starting with lower case letter,
and without the period at the end. Besides, add the prefixed "internel:"
at the beginning of the messages when they are caused internally.
Also fix indents and typos.
bfd/
* elfnn-riscv.c (riscv_merge_attributes): Fix typos of messages.
gas/
* config/tc-riscv.c: Error and warning messages tidy.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Updated.
* testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-read-only-02.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
ld/
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-01.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-05.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-06.d: Likewise.
opcodes/
* riscv-dis.c (parse_riscv_dis_option): Fix typos of message.
The GNU coding standards said the comments should be complete sentences
and end with a period and two spaces. But sometimes it should be more
cleaner when the comments only include a word or codes. Therefore, I made
the following changes after referring to other target/generic codes,
* Try to write sentences in comments, must end with a period and two spaces.
* End with two spaces without a period for codes/instructions only.
* End with one space without a period for a single word/variable only.
Besids, also rewrite/remove some comments which are obsolete or too long,
and fix indents for comments.
bfd/
* elfnn-riscv.c: Comments tidy and improvement.
* elfxx-riscv.c: Likewise.
* elfxx-riscv.h: Likewise.
gas/
* config/tc-riscv.c: Comments tidy and improvement. Also update
comment "fallthru" to "Fall through" that end with a period and
two spaces.
include/
* elf/riscv.h: Comments tidy and improvement.
* opcode/riscv-opc.h: Likewise.
* opcode/riscv.h: Likewise.
opcodes/
* riscv-dis.c: Comments tidy and improvement.
* riscv-opc.c: Likewise.
