and other tidies. I think it's better to default to passing the
section to bfd_octets_per_byte, even in cases where we know it won't
make a difference.
A number of the coff reloc functions used bfd_octets_per_byte wrongly,
not factoring it into the offset into the data buffer. As it happens,
the targets using those files always had bfd_octets_per_byte equal to
one, so there wasn't any detectable wrong behaviour. However, it is
wrong in the source and might cause trouble for anyone creating a new
target. Besides fixing that, the patch also defines OCTETS_PER_BYTE
as one in target files where that is appropriate.
bfd/
* archures.c (bfd_octets_per_byte): Tail call
bfd_arch_mach_octets_per_byte.
* coff-arm.c (OCTETS_PER_BYTE): Define.
(coff_arm_reloc): Introduce new "octets" temp. Use OCTETS_PER_BYTE
with section. Correct "addr". Remove ATTRIBUTE_UNUSED.
* coff-i386.c (coff_i386_reloc): Similarly.
* coff-mips.c (mips_reflo_reloc): Similarly.
* coff-x86_64.c (coff_amd64_reloc): Similarly.
* elf32-msp430.c (OCTETS_PER_BYTE): Define.
(rl78_sym_diff_handler): Use OCTETS_PER_BYTE, with section.
* elf32-nds32.c (nds32_elf_get_relocated_section_contents): Similarly.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): Similarly.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): Similarly.
* elf32-s12z.c (opru18_reloc): Similarly.
* elf32-sh.c (sh_elf_reloc): Similarly.
* elf32-spu.c (spu_elf_rel9): Similarly.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): Similarly.
* elf64-ppc.c (ppc64_elf_ha_reloc, ppc64_elf_brtaken_reloc),
(ppc64_elf_toc64_reloc): Similarly.
* bfd.c (bfd_get_section_limit): Pass section to bfd_octets_per_byte.
* cofflink.c (_bfd_coff_link_input_bfd),
(_bfd_coff_reloc_link_order): Likewise.
* elf.c (_bfd_elf_section_offset): Likewise.
* elflink.c (resolve_section, bfd_elf_perform_complex_relocation),
(elf_link_input_bfd, elf_reloc_link_order, elf_fixup_link_order),
(bfd_elf_final_link): Likewise.
* elf.c (_bfd_elf_make_section_from_shdr): Don't strncmp twice
to set SEC_ELF_OCTETS.
* reloc.c (bfd_perform_relocation): Tidy SEC_ELF_OCTETS special case.
(bfd_install_relocation): Likewise.
(_bfd_final_link_relocate): Don't recalculate octets.
* syms.c (_bfd_stab_section_find_nearest_line): Introduc new
"octets" temp.
* bfd-in2.h: Regenerate.
ld/
* ldexp.c (fold_name): Pass section to bfd_octets_per_byte.
* ldlang.c (init_opb): Don't call bfd_arch_mach_octets_per_byte
unnecessarily.
All symbols, sizes and relocations in this section are octets instead of
bytes. Required for DWARF debug sections as DWARF information is
organized in octets, not bytes.
bfd/
* section.c (struct bfd_section): New flag SEC_ELF_OCTETS.
* archures.c (bfd_octets_per_byte): New parameter sec.
If section is not NULL and SEC_ELF_OCTETS is set, one octet es
returned [ELF targets only].
* bfd.c (bfd_get_section_limit): Provide section parameter to
bfd_octets_per_byte.
* bfd-in2.h: regenerate.
* binary.c (binary_set_section_contents): Move call to
bfd_octets_per_byte into section loop. Provide section parameter
to bfd_octets_per_byte.
* coff-arm.c (coff_arm_reloc): Provide section parameter
to bfd_octets_per_byte.
* coff-i386.c (coff_i386_reloc): likewise.
* coff-mips.c (mips_reflo_reloc): likewise.
* coff-x86_64.c (coff_amd64_reloc): likewise.
* cofflink.c (_bfd_coff_link_input_bfd): likewise.
(_bfd_coff_reloc_link_order): likewise.
* elf.c (_bfd_elf_section_offset): likewise.
(_bfd_elf_make_section_from_shdr): likewise.
Set SEC_ELF_OCTETS for sections with names .gnu.build.attributes,
.debug*, .zdebug* and .note.gnu*.
* elf32-msp430.c (rl78_sym_diff_handler): Provide section parameter
to bfd_octets_per_byte.
* elf32-nds.c (nds32_elf_get_relocated_section_contents): likewise.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): likewise.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): likewise.
* elf32-s12z.c (opru18_reloc): likewise.
* elf32-sh.c (sh_elf_reloc): likewise.
* elf32-spu.c (spu_elf_rel9): likewise.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): likewise
* elf64-ppc.c (ppc64_elf_brtaken_reloc): likewise.
(ppc64_elf_addr16_ha_reloc): likewise.
(ppc64_elf_toc64_reloc): likewise.
* elflink.c (bfd_elf_final_link): likewise.
(bfd_elf_perform_complex_relocation): likewise.
(elf_fixup_link_order): likewise.
(elf_link_input_bfd): likewise.
(elf_link_sort_relocs): likewise.
(elf_reloc_link_order): likewise.
(resolve_section): likewise.
* linker.c (_bfd_generic_reloc_link_order): likewise.
(bfd_generic_define_common_symbol): likewise.
(default_data_link_order): likewise.
(default_indirect_link_order): likewise.
* srec.c (srec_set_section_contents): likewise.
(srec_write_section): likewise.
* syms.c (_bfd_stab_section_find_nearest_line): likewise.
* reloc.c (_bfd_final_link_relocate): likewise.
(bfd_generic_get_relocated_section_contents): likewise.
(bfd_install_relocation): likewise.
For section which have SEC_ELF_OCTETS set, multiply output_base
and output_offset with bfd_octets_per_byte.
(bfd_perform_relocation): likewise.
include/
* coff/ti.h (GET_SCNHDR_SIZE, PUT_SCNHDR_SIZE, GET_SCN_SCNLEN),
(PUT_SCN_SCNLEN): Adjust bfd_octets_per_byte calls.
binutils/
* objdump.c (disassemble_data): Provide section parameter to
bfd_octets_per_byte.
(dump_section): likewise
(dump_section_header): likewise. Show SEC_ELF_OCTETS flag if set.
gas/
* as.h: Define SEC_OCTETS as SEC_ELF_OCTETS if OBJ_ELF.
* dwarf2dbg.c: (dwarf2_finish): Set section flag SEC_OCTETS for
.debug_line, .debug_info, .debug_abbrev, .debug_aranges, .debug_str
and .debug_ranges sections.
* write.c (maybe_generate_build_notes): Set section flag
SEC_OCTETS for .gnu.build.attributes section.
* frags.c (frag_now_fix): Don't divide by OCTETS_PER_BYTE if
SEC_OCTETS is set.
* symbols.c (resolve_symbol_value): Likewise.
ld/
* ldexp.c (fold_name): Provide section parameter to
bfd_octets_per_byte.
* ldlang (init_opb): New argument s. Set opb_shift to 0 if
SEC_ELF_OCTETS for the current section is set.
(print_input_section): Pass current section to init_opb.
(print_data_statement,print_reloc_statement,
print_padding_statement): Likewise.
(lang_check_section_addresses): Call init_opb for each
section.
(lang_size_sections_1,lang_size_sections_1,
lang_do_assignments_1): Likewise.
(lang_process): Pass NULL to init_opb.
Make _bfd_riscv_relax_call handle section alignment padding same as
the _bfd_riscv_relax_lui and _bfd_riscv_relax_pc functions already
do. Use the max section alignment if section boundaries are crossed,
otherwise the alignment of the containing section.
bfd/
PR 25181
* elfnn-riscv.c (_bfd_riscv_relax_call): Always add max_alignment to
foff. If sym_sec->output_section and sec->output_section are the same
and not *ABS* then set max_alignment to that section's alignment.
ld/
PR 25181
* testsuite/ld-riscv-elf/call-relax-0.s: New file.
* testsuite/ld-riscv-elf/call-relax-1.s: New file.
* testsuite/ld-riscv-elf/call-relax-2.s: New file.
* testsuite/ld-riscv-elf/call-relax-3.s: New file.
* testsuite/ld-riscv-elf/call-relax.d: New test.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run call-relax test.
Change-Id: Iaf65cee52345abf1955f36e8e72c4f6cc0db8d9a
I think it is past time to remove CR16C support. CR16C was added in
2004, and only for ld. gas and binutils support is lacking, and there
have been no commits to bfd/elf32-cr16c.c other than warning fixes or
global maintainers making changes to all targets. I see no maintainer
listed for CR16C, and no commits from anyone at NSC supporting the
target. Furthermore, at the time the CR16 support was added in 2007,
config.sub was changed upstream to no longer recognise cr16c as a
valid cpu. That means the CR16C ld support is only available as a
secondary target by configuring with, for example,
--enable-targets=all or --enable-targets=cr16c-unknown-elf. No
testing of the CR16C target is possible.
include/
* elf/cr16c.h: Delete.
bfd/
* cpu-cr16c.c: Delete.
* elf32-cr16c.c: Delete.
* Makefile.am,
* archures.c,
* config.bfd,
* configure.ac,
* reloc.c,
* targets.c: Remove cr16c support.
* Makefile.in,
* bfd-in2.h,
* configure,
* libbfd.h,
* po/SRC-POTFILES.in: Regenerate.
ld/
* emulparams/elf32cr16c.sh: Delete.
* scripttempl/elf32cr16c.sc: Delete.
* Makefile.am,
* configure.tgt: Remove cr16c support.
* NEWS: Mention removal of cr16c.
* Makefile.in,
* po/BLD-POTFILES.in: Regenerate.
The target list was supposed to be more or less alphabetically sorted,
but this wasn't anywhere near the case. The comment about keeping
architecture variants together seems odd to me, and is no doubt the
reason why ix86 and x86_64 were grouped together, so I removed that
comment. The patch doesn't change order of entries for a given cpu.
* configure.tgt: Order targets by cpu.
For targets with octets_per_byte > 1, testsuite/ld-scripts/rgn-over*
produce wrong sizes in the generated map files:
.text 0x0000000000001000 0x6
^^^ # correct
*(.txt)
.txt 0x0000000000001000 0xc tmpdir/rgn-over.o
^^^ # should also be 0x6
* ldlang.c (print_input_section): Shift printed size by opb_shift.
A target that sets EMBEDDED non-empty is one that doesn't want to put
the ELF file header or program header in a memory image. Likely the
target isn't interested in supporting dynamically loaded executables,
shared libraries, or PIEs, because loaders for such binaries generally
require program headers to be present. This isn't 100% true though.
The target might be one where the loader accesses the file system in
order to retrieve headers.
Also, note that not all "shared libraries" require gcc -shared or the
shared library support in the linker. I believe one implementation of
shared libraries on uclinux is like this.
So, this patch removes GENERATE_SHLIB_SCRIPT and GENERATE_PIE_SCRIPT
in most emulparams files where EMBEDDED is set, restoring the shared
lib and pie support in emulparams files that unset EMBEDDED after
including a file where the support is removed.
Exceptions to the general rule that EMBEDDED disables shared libs are:
arm*-*-symbianelf*, where the OS wants shared library support
without ELF program headers in the image, and
sh*-*-uclinux*, where I've left things as they were, ie. both
EMBEDDED and GENERATE_SHLIB_SCRIPT because I'm unsure as to the
shared library scheme.
* emulparams/aarch64elf.sh (GENERATE_SHLIB_SCRIPT),
(GENERATE_PIE_SCRIPT): Don't set.
* emulparams/aarch64elf32.sh (GENERATE_SHLIB_SCRIPT),
(GENERATE_PIE_SCRIPT): Don't set.
* emulparams/arcelf.sh (GENERATE_SHLIB_SCRIPT): Don't set.
* emulparams/armelf.sh (GENERATE_SHLIB_SCRIPT),
(GENERATE_PIE_SCRIPT): Don't set.
* emulparams/armelf_fbsd.sh (GENERATE_SHLIB_SCRIPT): Set.
* emulparams/armelf_nbsd.sh (GENERATE_SHLIB_SCRIPT),
(GENERATE_PIE_SCRIPT): Set.
* emulparams/armelf_vxworks.sh (GENERATE_SHLIB_SCRIPT): Set.
* emulparams/armsymbian.sh (GENERATE_SHLIB_SCRIPT): Set.
* emulparams/elf32bfin.sh (GENERATE_SHLIB_SCRIPT): Don't set.
* emulparams/elf32microblaze.sh (GENERATE_SHLIB_SCRIPT): Don't set.
* emulparams/score3_elf.sh (GENERATE_SHLIB_SCRIPT): Don't set.
* emulparams/shelf.sh (GENERATE_SHLIB_SCRIPT): Don't set.
* emulparams/shelf_nbsd.sh (GENERATE_SHLIB_SCRIPT),
(GENERATE_PIE_SCRIPT): Set.
* emulparams/shelf_uclinux.sh (GENERATE_SHLIB_SCRIPT): Set.
No real changes here, just making it that much easier to find targets
that set EMBEDDED to a non-empty string.
* emulparams/elf32bfinfd.sh: Unset EMBEDDED rather assigning as empty.
* emulparams/elf32frvfd.sh: Likewise.
* emulparams/elf32lm32fd.sh: Likewise.
* emulparams/i386lynx.sh: Likewise.
At least, not in the GOT. R_PPC64_RELATIVE is fine for powerpc64 in
the .opd section.
PR 22269
* testsuite/ld-elf/pr22269-1.rd: Look for GOT section NONE and
RELATIVE relocs.
* testsuite/ld-elf/shared.exp (pr22269-1): Give test a better
name. Use -z nocombreloc.
Two patches from Nelson Chu.
It is better to use the linker's callback functions to handle the link time
error when relocating. The unresolved relocation error can be regarded as
an unsupported relocation. To make user easier to understand different errors,
we need to extend the current error message format of the callback function
since the format is fixed.
bfd/
* elfnn-riscv.c (riscv_elf_relocate_section): Use asprintf to extend
the error message if needed, and then store the result into the
`msg_buf`. Finally, remember to free the unused `msg_buf`. All error
message for the dangerous relocation should be set before we call the
callback function. If we miss the error message since linker runs out
of memory, we should set the default error message for the error.
ld/
* testsuite/ld-riscv-elf/lib-nopic-01a.s: Create the shared library
lib-nopic-01a.so, it will be linked with lib-nopic-01b.s.
* testsuite/ld-riscv-elf/lib-nopic-01b.s: Add new test for the
unresolved relocation. Link the non-pic code into a shared library
may cause the error.
* testsuite/ld-riscv-elf/lib-nopic-01b.d: Likewise.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run the new test only when
the shared library is supported.
R_RISCV_CALL, R_RISCV_JAL and R_RISCV_RVC_JUMP are pc-relative relocation.
For now, we do not allow the object with these relocation links into a shared
library since the referenced symbols may be loaded to the places that too far
from the pc. We can improve the error message for these unsupported relocation
to notice user that they should recompile their code with `fPIC`.
bfd/
* elfnn-riscv.c (riscv_elf_relocate_section): Report the error message
that user should recompile their code with `fPIC` when linking non-pic
code into shared library.
ld/
* testsuite/ld-riscv-elf/lib-nopic-01b.d: Update the error message.
Change-Id: Ib3347a0a6fa1c2b20a9647c314d5bec2c322ff04
This implements padding of orphan executable sections for PowerPC.
Of course, the simple implementation of bfd_arch_ppc_nop_fill and
removing the NOP definition didn't work, with powerpc64 hitting a
testsuite failure linking to S-records. That's because the srec
target is BFD_ENDIAN_UNKNOWN so the test of bfd_big_endian (abfd) in
default_data_link_order therefore returned false, resulting in a
little-endian nop pattern. The rest of the patch fixes that problem
by adding a new field to bfd_link_info that can be used to determine
actual endianness on targets like srec.
PR 13616
include/
* bfdlink.h (struct bfd_link_info <big_endian>): New field.
bfd/
* cpu-powerpc.c (bfd_arch_ppc_nop_fill): New function, use it
for all ppc arch info.
* linker.c (default_data_link_order): Pass info->big_endian to
arch_info->fill function.
ld/
* emulparams/elf64lppc.sh (NOP): Don't define.
* emulparams/elf64ppc.sh (NOP): Don't define.
* ldwrite.c (build_link_order): Use link_info.big_endian. Move
code determining endian to use for data_statement to..
* ldemul.c (after_open_default): ..here. Set link_info.big_endian.
Some of the comments in this file are ancient and no longer reflect
reality. This patch removes those comments, and also the description
of ld options emitted to script files. While describing what an
option does in the script file might help reinforce what the option
does, it's unnecessary and makes for overlong lines. Also, some of
the descriptions did not mention all the options.
* genscripts.sh: Correct comments. Remove outdated comment block
saying "Generate 5 or 6 script files..". Remove description of
ld options from comment emitted to script files, and order options
as per comment block in genscripts.sh saying which scripts are
generated.
ctor_cmp had an ineffective comparison of addresses in an attempt to
ensure sort stability. Comparing the addresses passed to the
comparison function can't work since those addresses may be from an
array that is already perturbed by qsort.
* ldctor.h (struct set_element): Make next field a union, adding
idx field.
* ldctor.c (ctor_cmp): Dereference pointer and lose unnecessary
const. Replace final sort on pointer value with final sort on idx.
(ldctor_add_set_entry): Adjust next field access.
(ldctor_build_sets): Likewise. Set u.idx field for sort.
binutils* README-how-to-make-a-release: Add a note to reset the
development flag back to true after making a point release.
ld * NEWS: Delete superflous "Changes in 2.33" comment.
The testcase in the PR has two empty output sections, .sec1 with an
ALIGN and symbol assignment, and .sec2 just with an empty input
section. The symbol assignment results in .sec1 being kept, but
because it is empty this section doesn't take space from the memory
region as you might expect from the ALIGN. Instead the next section
.sec2, has vma/lma as if .sec1 wasn't present. However, .sec2 is
discarded and os->ignored set, which unfortunately meant that dot
wasn't set from .sec2 vma. That in turn results in .sec2 lma being
set incorrectly. That vma/lma difference is then propagated to
.sec3 where it is seen as an overlap.
PR 25081
* ldlang.c (lang_size_sections_1): Set lma from section vma
rather than dot.
This is the one that causes ld segfaults between 2019-10-04 and
2019-10-07. Bug introduced with f749f26eea, fixed by 93370e8e7b.
* testsuite/ld-powerpc/localgot.s,
* testsuite/ld-powerpc/localgot.d: New test.
* testsuite/ld-powerpc/powerpc.exp: Run it.
This functionality will generate a new GNU object attribute for the "data region"
has been added. This object attribute is used
mark whether the compiler has generated code assuming that data could be in the
upper or lower memory regions.
Code which assumes data is always in the lower memory region is incompatible
with code which uses the full memory range for data.
The patch also adds a new assembler directive ".mspabi_attribute" to handle the
existing MSPABI object attributes. GCC will now emit both .gnu_attribute and
.mspabi_attribute directives to indicate what options the source file was
compiled with.
The assembler will now check the values set in these directives against the
options that the it has been invoked with. If there is a discrepancy, the
assembler will exit with an error.
bfd * elf32-msp430.c (elf32_msp430_merge_mspabi_attributes): Rename to..
(elf32_msp430_merge_msp430_attributes): Add support for merging the GNU
object attribute for data region.
binutils* readelf.c (display_msp430_gnu_attribute): New.
(process_arch_specific): Use msp430 specific handler for GNU
attributes.
gas * config/tc-msp430.c (md_parse_option): Set lower_data_region_only to
FALSE if the data region is set to "upper", "either" or "none".
(msp430_object_attribute): New.
(md_pseudo_table): Handle .mspabi_attribute and .gnu_attribute.
(msp430_md_end): Replace hard-coded attribute values with enums.
Handle data region object attribute.
* doc/as.texi: Document MSP430 Data Region object attribute.
* doc/c-msp430.texi: Document the .mspabi_attribute directive.
* testsuite/gas/msp430/attr-430-small-bad.d: New test.
* testsuite/gas/msp430/attr-430-small-bad.l: New test.
* testsuite/gas/msp430/attr-430-small-good.d: New test.
* testsuite/gas/msp430/attr-430-small.s: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-any-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-any.s: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-lower-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower.s: New test.
* testsuite/gas/msp430/msp430.exp: Run new tests.
include * elf/msp430.h: Add enums for MSPABI and GNU object attribute tag names
and values.
ld * testsuite/ld-msp430-elf/attr-gnu-main.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-obj.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower-upper.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-upper.d: New test.
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
This patch is a result of noticing messages like the following:
tmpdir/tls32.o: in function `_start':
(.text+0x1c): unresolvable R_PPC_REL24 relocation against symbol `__tls_get_addr_opt'
./ld-new: final link failed: symbol needs debug section which does not exist
The "needs debug section" comes from attempting to use debug info to
find source line information to print the first error message. That
error isn't of interest to the user, and any previous bfd_error value
which might be of interest is overwritten. So save and restore
bfd_error around the fancy error reporting code.
That still doesn't leave us with a clean bfd_error. Now we get
./ld-new: final link failed: nonrepresentable section on output
An unresolvable relocation surely doesn't mean there is some bfd
section that ld doesn't know how to output! Digging into that showed
a _bfd_elf_section_from_bfd_section failure attempting to find an elf
section correcsponding to ".interp". So don't go looking for elf
sections on linker created bfd sections.
And then fix the linker testsuite which expected the bogus message..
bfd/
* elflink.c (elf_fixup_link_order): Don't attempt to find
an elf_section for linker created bfd sections.
ld/
* ldmisc.c (vfinfo): Save and restore bfd_error around bfd
function calls that might set it.
* testsuite/ld-elf/indirect.exp: Don't expect "nonrepresentable
section" message.
This patch adds some --no-tls-optimize tests and performs some of the
existing dynamic tests with tls markers in order to catch any
regression in PLT counting.
* testsuite/ld-powerpc/tlsexe.r: Adjust for added TLSMARK symbol.
* testsuite/ld-powerpc/tlsexe32.r: Likewise.
* testsuite/ld-powerpc/tlsso.r: Likewise.
* testsuite/ld-powerpc/tlsso32.r: Likewise.
* testsuite/ld-powerpc/tls32no.d,
* testsuite/ld-powerpc/tls32no.g: New test files.
* testsuite/ld-powerpc/tlsexe32no.d,
* testsuite/ld-powerpc/tlsexe32no.g,
* testsuite/ld-powerpc/tlsexe32no.r: New test files.
* testsuite/ld-powerpc/tlsexeno.d,
* testsuite/ld-powerpc/tlsexeno.g,
* testsuite/ld-powerpc/tlsexeno.r: New test files.
* testsuite/ld-powerpc/tlsexetocno.d,
* testsuite/ld-powerpc/tlsexetocno.g: New test files.
* testsuite/ld-powerpc/tlsno.d,
* testsuite/ld-powerpc/tlsno.g: New test files.
* testsuite/ld-powerpc/tlstocno.d,
* testsuite/ld-powerpc/tlstocno.g: New test files.
* testsuite/ld-powerpc/powerpc.exp: Run new tests.
1) GOT entries generated for any of the GOT TLS relocations don't need
dynamic relocations for locally defined symbols in PIEs. In the case
of a tls_index doubleword, the dtpmod entry is known to be 1, and the
dtprel entry is also known at link time and relative. Similarly,
dtprel and tprel words are known at link time and relative. (GOT
entries for other than TLS symbols are not relative and thus need
dynamic relocations in PIEs.)
2) Local dynamic TLS code is really only meant for accesses local to
the current binary. There was a cheapskate test for this before using
the common tlsld_got slot, but the test wasn't exactly correct and
might confuse anyone looking at the code. The proper test,
SYMBOL_REFERENCES_LOCAL isn't so expensive that it should be avoided.
3) The same cheap test for local syms when optimising TLS sequences
should be SYMBOL_REFERENCES_LOCAL too.
bfd/
* elf64-ppc.c (ppc64_elf_check_relocs): Move initialisation of vars.
(ppc64_elf_tls_optimize): Correct is_local condition.
(allocate_got): Don't reserve dynamic relocations for any of the
tls got relocs in PIEs when the symbol is local.
(allocate_dynrelocs): Correct validity test for local sym using
tlsld_got slot.
(ppc64_elf_size_dynamic_sections): Don't reserve dynamic relocations
for any of the tls got relocs in PIEs.
(ppc64_elf_layout_multitoc): Likewise.
(ppc64_elf_relocate_section): Correct validity test for local sym
using tlsld_got slot. Don't emit dynamic relocations for any of
the tls got relocs in PIEs when the symbol is local.
* elf32-ppc.c (ppc_elf_tls_optimize): Correct is_local condition.
(got_relocs_needed): Delete.
(allocate_dynrelocs): Correct validity test for local sym using
tlsld_got slot. Don't reserve dynamic relocations for any of the
tls got relocs in PIEs when the symbol is local.
(ppc_elf_size_dynamic_sections): Don't reserve dynamic relocations
for any of the tls got relocs in PIEs.
(ppc_elf_relocate_section): Correct validity test for local sym
using tlsld_got slot. Don't emit dynamic relocations for any of
the tls got relocs in PIEs when the symbol is local.
ld/
* testsuite/ld-powerpc/tlsso.d: Adjust to suit tlsld_got usage change.
* testsuite/ld-powerpc/tlsso.g: Likewise.
* testsuite/ld-powerpc/tlsso.r: Likewise.
* testsuite/ld-powerpc/tlsso32.d: Likewise.
* testsuite/ld-powerpc/tlsso32.g: Likewise.
* testsuite/ld-powerpc/tlsso32.r: Likewise.
On 64-bit host the 32-bit addend was loaded without sign extension into
an unsigned long.
bfd/ChangeLog:
PR ld/25062
* elf32-arm.c (elf32_arm_final_link_relocate): Sign extend data.
ld/ChangeLog:
PR ld/25062
* testsuite/ld-arm/arm-elf.exp: Update.
* testsuite/ld-arm/tls-gdesc-neg.d: New test.
* testsuite/ld-arm/tls-gdesc-neg.s: New test.
This lets other programs read and write CTF-format data.
Two versioned shared libraries are created: libctf.so and
libctf-nobfd.so. They contain identical content except that
libctf-nobfd.so contains no references to libbfd and does not implement
ctf_open, ctf_fdopen, ctf_bfdopen or ctf_bfdopen_ctfsect, so it can be
used by programs that cannot use BFD, like readelf.
The soname major version is presently .0 until the linker API
stabilizes, when it will flip to .1 and hopefully never change again.
New in v3.
v4: libtoolize and turn into a pair of shared libraries. Drop
--enable-install-ctf: now controlled by --enable-shared and
--enable-install-libbfd, like everything else.
v5: Add ../bfd to ACLOCAL_AMFLAGS and AC_CONFIG_MACRO_DIR. Fix tabdamage.
* Makefile.def (host_modules): libctf is no longer no_install.
* Makefile.in: Regenerated.
libctf/
* configure.ac (AC_DISABLE_SHARED): New, like opcodes/.
(LT_INIT): Likewise.
(AM_INSTALL_LIBBFD): Likewise.
(dlopen): Note why this is necessary in a comment.
(SHARED_LIBADD): Initialize for possibly-PIC libiberty: derived from
opcodes/.
(SHARED_LDFLAGS): Likewise.
(BFD_LIBADD): Likewise, for libbfd.
(BFD_DEPENDENCIES): Likewise.
(VERSION_FLAGS): Initialize, using a version script if ld supports
one, or libtool -export-symbols-regex otherwise.
(AC_CONFIG_MACRO_DIR): Add ../BFD.
* Makefile.am (ACLOCAL_AMFLAGS): Likewise.
(INCDIR): New.
(AM_CPPFLAGS): Use $(srcdir), not $(top_srcdir).
(noinst_LIBRARIES): Replace with...
[INSTALL_LIBBFD] (lib_LTLIBRARIES): This, or...
[!INSTALL_LIBBFD] (noinst_LTLIBRARIES): ... this, mentioning new
libctf-nobfd.la as well.
[INSTALL_LIBCTF] (include_HEADERS): Add the CTF headers.
[!INSTALL_LIBCTF] (include_HEADERS): New, empty.
(libctf_a_SOURCES): Rename to...
(libctf_nobfd_la_SOURCES): ... this, all of libctf other than
ctf-open-bfd.c.
(libctf_la_SOURCES): Now derived from libctf_nobfd_la_SOURCES,
with ctf-open-bfd.c added.
(libctf_nobfd_la_LIBADD): New, using @SHARED_LIBADD@.
(libctf_la_LIBADD): New, using @BFD_LIBADD@ as well.
(libctf_la_DEPENDENCIES): New, using @BFD_DEPENDENCIES@.
* Makefile.am [INSTALL_LIBCTF]: Use it.
* aclocal.m4: Add ../bfd/acinclude.m4, ../config/acx.m4, and the
libtool macros.
* libctf.ver: New, everything is version LIBCTF_1.0 currently (even
the unstable components).
* Makefile.in: Regenerated.
* config.h.in: Likewise.
* configure: Likewise.
binutils/
* Makefile.am (LIBCTF): Mention the .la file.
(LIBCTF_NOBFD): New.
(readelf_DEPENDENCIES): Use it.
(readelf_LDADD): Likewise.
* Makefile.in: Regenerated.
ld/
* configure.ac (TESTCTFLIB): Set to the .so or .a, like TESTBFDLIB.
* Makefile.am (TESTCTFLIB): Use it.
(LIBCTF): Use the .la file.
(check-DEJAGNU): Use it.
* Makefile.in: Regenerated.
* configure: Likewise.
include/
* ctf-api.h: Note the instability of the ctf_link interfaces.
This is quite complicated because the CTF section's contents depend on
the final contents of the symtab and strtab, because it has two sections
whose contents are shuffled to be in 1:1 correspondence with the symtab,
and an internal strtab that gets deduplicated against the ELF strtab
(with offsets adjusted to point into the ELF strtab instead). It is
also compressed if large enough, so its size depends on its contents!
So we cannot construct it as early as most sections: we cannot even
*begin* construction until after the symtab and strtab are finalized.
Thankfully there is already one section treated similarly: compressed
debugging sections: the only differences are that compressed debugging
sections have extra handling to deal with their changing name if
compressed (CTF sections are always called ".ctf" for now, though we
have reserved ".ctf.*" against future use), and that compressed
debugging sections have previously-uncompressed content which has to be
stashed away for later compression, while CTF sections have no content
at all until we generate it (very late).
BFD also cannot do the link itself: libctf knows how to do it, and BFD
cannot call libctf directly because libctf already depends on bfd for
file I/O. So we have to use a pair of callbacks, one, examine_strtab,
which allows a caller to examine the symtab and strtab after
finalization (called from elf_link_swap_symbols_out(), right before the
symtabs are written, and after the strtab has been finalized), and one
which actually does the emission (called emit_ctf simply because it is
grouped with a bunch of section-specific late-emission function calls at
the bottom of bfd_elf_final_link, and a section-specific name seems best
for that). emit_ctf is actually called *twice*: once from lang_process
if the emulation suggests that this bfd target does not examine the
symtab or strtab, and once via a bfd callback if it does. (This means
that non-ELF targets still get CTF emitted, even though the late CTF
emission stage is never called for them).
v2: merged with non-ELF support patch: slight commit message
adjustments.
v3: do not spend time merging CTF, or crash, if the CTF section is
explicitly discarded. Do not try to merge or compress CTF unless
linking.
v4: add CTF_COMPRESSION_THRESHOLD. Annul the freed input ctf_file_t's
after writeout: set SEC_IN_MEMORY on the output contents so a future
bfd enhancement knows it could free it. Add SEC_LINKER_CREATED |
SEC_KEEP to avoid having to add .ctf to the linker script. Drop
now-unnecessary ldlang.h-level elf-bfd.h include and hackery around
it. Adapt to elf32.em->elf.em and elf-generic.em->ldelf*.c
changes.
v5: fix tabdamage. Drop #inclusions in .h files: include in .c files,
.em files, and use struct forwards instead. Use bfd_section_is_ctf
inline function rather than SECTION_IS_CTF macro. Move a few
comments.
* Makefile.def (dependencies): all-ld depends on all-libctf.
* Makefile.in: Regenerated.
include/
* bfdlink.h (elf_strtab_hash): New forward.
(elf_sym_strtab): Likewise.
(struct bfd_link_callbacks <examine_strtab>): New.
(struct bfd_link_callbacks <emit_ctf>): Likewise.
bfd/
* elf-bfd.h (bfd_section_is_ctf): New inline function.
* elf.c (special_sections_c): Add ".ctf".
(assign_file_positions_for_non_load_sections): Note that
compressed debugging sections etc are not assigned here. Treat
CTF sections like SEC_ELF_COMPRESS sections when is_linker_output:
sh_offset -1.
(assign_file_positions_except_relocs): Likewise.
(find_section_in_list): Note that debugging and CTF sections, as
well as reloc sections, are assigned later.
(_bfd_elf_assign_file_positions_for_non_load): CTF sections get
their size and contents updated.
(_bfd_elf_set_section_contents): Skip CTF sections: unlike
compressed sections, they have no uncompressed content to copy at
this stage.
* elflink.c (elf_link_swap_symbols_out): Call the examine_strtab
callback right before the strtab is written out.
(bfd_elf_final_link): Don't cache the section contents of CTF
sections: they are not populated yet. Call the emit_ctf callback
right at the end, after all the symbols and strings are flushed
out.
ld/
* ldlang.h: (struct lang_input_statement_struct): Add the_ctf.
(struct elf_sym_strtab): Add forward.
(struct elf_strtab_hash): Likewise.
(ldlang_ctf_apply_strsym): Declare.
(ldlang_write_ctf_late): Likewise.
* ldemul.h (ldemul_emit_ctf_early): New.
(ldemul_examine_strtab_for_ctf): Likewise.
(ld_emulation_xfer_type) <emit_ctf_early>: Likewise.
(ld_emulation_xfer_type) <examine_strtab_for_ctf>: Likewise.
* ldemul.c (ldemul_emit_ctf_early): New.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldlang.c: Include ctf-api.h.
(CTF_COMPRESSION_THRESHOLD): New.
(ctf_output): New. Initialized in...
(ldlang_open_ctf): ... this new function. Open all the CTF
sections in the input files: mark them non-loaded and empty
so as not to copy their contents to the output, but linker-created
so the section gets created in the target.
(ldlang_merge_ctf): New, merge types via ctf_link_add_ctf and
ctf_link.
(ldlang_ctf_apply_strsym): New, an examine_strtab callback: wrap
ldemul_examine_strtab_for_ctf.
(lang_write_ctf): New, write out the CTF section.
(ldlang_write_ctf_late): New, late call via bfd's emit_ctf hook.
(lang_process): Call ldlang_open_ctf, ldlang_merge_ctf, and
lang_write_ctf.
* ldmain.c (link_callbacks): Add ldlang_ctf_apply_strsym,
ldlang_write_ctf_late.
* emultempl/aix.em: Add ctf-api.h.
* emultempl/armcoff.em: Likewise.
* emultempl/beos.em: Likewise.
* emultempl/elf.em: Likewise.
* emultempl/generic.em: Likewise.
* emultempl/linux.em: Likewise.
* emultempl/msp430.em: Likewise.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/ticoff.em: Likewise.
* emultempl/vanilla.em: Likewise.
* ldcref.c: Likewise.
* ldctor.c: Likewise.
* ldelf.c: Likewise.
* ldelfgen.c: Likewise.
* ldemul.c: Likewise.
* ldexp.c: Likewise.
* ldfile.c: Likewise.
* ldgram.c: Likewise.
* ldlex.l: Likewise.
* ldmain.c: Likewise.
* ldmisc.c: Likewise.
* ldver.c: Likewise.
* ldwrite.c: Likewise.
* lexsup.c: Likewise.
* mri.c: Likewise.
* pe-dll.c: Likewise.
* plugin.c: Likewise.
* ldelfgen.c (ldelf_emit_ctf_early): New.
(ldelf_examine_strtab_for_ctf): tell libctf about the symtab and
strtab.
(struct ctf_strsym_iter_cb_arg): New, state to do so.
(ldelf_ctf_strtab_iter_cb): New: tell libctf about
each string in the strtab in turn.
(ldelf_ctf_symbols_iter_cb): New, tell libctf
about each symbol in the symtab in turn.
* ldelfgen.h (struct elf_sym_strtab): Add forward.
(struct elf_strtab_hash): Likewise.
(struct ctf_file): Likewise.
(ldelf_emit_ctf_early): Declare.
(ldelf_examine_strtab_for_ctf): Likewise.
* emultempl/elf-generic.em (LDEMUL_EMIT_CTF_EARLY): Set it.
(LDEMUL_EXAMINE_STRTAB_FOR_CTF): Likewise.
* emultempl/aix.em (ld_${EMULATION_NAME}_emulation): Add
emit_ctf_early and examine_strtab_for_ctf, NULL by default.
* emultempl/armcoff.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/beos.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/elf.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/generic.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/linux.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/msp430.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/pe.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/pep.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/ticoff.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/vanilla.em (ld_vanilla_emulation): Likewise.
* Makefile.am: Pull in libctf (and zlib, a transitive requirement
for compressed CTF section emission). Pass it on to DejaGNU.
* configure.ac: Add AM_ZLIB.
* aclocal.m4: Added zlib.m4.
* Makefile.in: Regenerated.
* testsuite/ld-bootstrap/bootstrap.exp: Use it when relinking ld.
Despite PR19615, it doesn't make sense to use -Bsymbolic with PIEs.
Dynamic symbols in an executable won't be overridden anyway.
* ld.texi (-Bsymbolic, -Bsymbolic-functions): Don't mention PIEs.
* ld.h (symbolic_enum, dynamic_list_enum),
(args_type <symbolic, dynamic_list>): Move to..
* lexsup.c (parse_args): ..here, using auto vars opt_symbolic
and opt_dynamic_list rather than command_line fields. Only
act on -Bsymbolic and -Bsymbolic-functions for shared library
output. Free dynamic_list.
I was looking at the implementation of this script keyword today and
couldn't remember why we do what we do in get_init_priority, because
the comments explain how the init_priority is encoded but don't say
why it is necessary to extract the priority and sort on that. So
after figuring out why (again), I wrote some more comments.
Then I simplified get_init_priority a little, adding some sanity
checking on the strtoul result. This actually makes get_init_priority
support sorting by numerical suffix more generally, but I figure this
feature would be better as a new keyword (without the .ctors/.dtors
special case), so haven't documented the extension.
* ld.texi (SORT_BY_ALIGNMENT): Reword slightly.
(SORT_BY_INIT_PRIORITY): Elucidate.
* ldlang.c: Include limits.h.
(get_init_priority): Comment. Change param to a section,
return an int. Sanity check priority digits. Support sorting
more sections with trailing digits. Return -1 on error.
(compare_section): Adjust.
bfd/
* bfd-in.h: Move arm declaraions..
* cpu-arm.h: ..to here, new file..
* coff-arm.h: ..and here, new file..
* elf32-arm.h: ..and here, new file.
* cpu-arm.c: Include cpu-arm.h.
* coff-arm.c: Include cpu-arm.h and coff-arm.h.
* elf32-arm.c: Include cpu-arm.h and elf32-arm.h.
* pe-arm.c: Move function rename defines later.
* pe-arm-wince.c: Likewise and include sysdep.h and bfd.h early.
* bfd-in2.h: Regenerate.
gas/
* config/tc-arm.c: Include cpu-arm.h.
ld/
* emultempl/armelf.em: Include elf32-arm.h.
* emultempl/pe.em: Move func defines later and include coff-arm.h.
gcc10 on x86_64 and powerpc64le recognises that the loop in
Foo::operator= can be turned into a call to memmove, which then
results in an undefined symbol when linking. Avoid that by making the
loop smaller.
* testsuite/ld-srec/sr3.cc (FOO_MSG_LEN): Set to 4.
For the lui and auipc relaxations, since the symbol value of an undefined weak
symbol is always be zero, we can optimize the patterns into a single LI/MV/ADDI
instruction.
bfd/
* elfnn-riscv.c (riscv_pcgp_hi_reloc): Add new field undefined_weak.
(riscv_record_pcgp_hi_reloc): New parameter undefined_weak.
Set undefined_weak field from it.
(relax_func_t): New parameter undefined_weak.
(_bfd_riscv_relax_call): New ignored parameter undefined_weak.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_delete): Likewise.
(_bfd_riscv_relax_lui): New parameter undefined_weak. If true,
allow relaxing. For LO12* relocs, set rs1 to x0 when undefined_weak.
(_bfd_riscv_relax_pc): New parameter undefined_weak. For LO12* relocs,
set undefined_weak from hi_reloc. If true, allow relaxing. For LO12*
relocs, set rs1 to x0 when undefined_weak and change to non-pcrel
reloc.
(_bfd_riscv_relax_section): New local undefined_weak. Set for
undef weak relocs that can be relaxed. Pass to relax_func call.
ld/
* testsuite/ld-riscv-elf/weakref32.s: Add relaxable undef weak code.
* testsuite/ld-riscv-elf/weakref64.s: Likewise.
* testsuite/ld-riscv-elf/weakref32.d: Updated.
* testsuite/ld-riscv-elf/weakref64.d: Updated.
