mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-11-23 18:14:13 +08:00
22d31b1192
601 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Pierre Langlois
|
6b940e6a06 |
Remove isize output argument from fast_tracepoint_valid_at
This patch removes the isize output argument from the fast_tracepoint_valid_at gdbarch hook. It was used to return the size of the instruction that needs to be replaced when installing a fast tracepoint. Instead of getting this value from the fast_tracepoint_valid_at hook, we can call the gdb_insn_length function. If we do not do this, then architectures which do not have a restriction on where to install the fast tracepoint will send uninitialized memory off to GDBserver. See remote_download_tracepoint: ~~~ int isize; if (gdbarch_fast_tracepoint_valid_at (target_gdbarch (), tpaddr, &isize, NULL)) xsnprintf (buf + strlen (buf), BUF_SIZE - strlen (buf), ":F%x", isize); ~~~ The default implementation of fast_tracepoint_valid_at will not set isize resulting in uninitialized memory being sent. Later on, GDBserver could use this information to compute a jump offset. gdb/ChangeLog: * arch-utils.c (default_fast_tracepoint_valid_at): Remove unused isize argument. * arch-utils.h (default_fast_tracepoint_valid_at): Likewise. * breakpoint.c (check_fast_tracepoint_sals): Adjust call to gdbarch_fast_tracepoint_valid_at. * gdbarch.sh (fast_tracepoint_valid_at): Remove isize argument. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. * i386-tdep.c (i386_fast_tracepoint_valid_at): Remove isize argument. Do not set it. * remote.c (remote_download_tracepoint): Adjust call to gdbarch_fast_tracepoint_valid_at. Call gdb_insn_length to get the instruction length. |
||
Simon Marchi
|
3374165f51 |
gdbarch: add addressable_memory_unit_size method
Add a new gdbarch method to get the length of an addressable memory unit for a given architecture. The default implementation returns 1. gdb/ChangeLog: * arch-utils.h (default_addressable_memory_unit_size): New. * arch-utils.c (default_addressable_memory_unit_size): New. * gdbarch.sh (addressable_memory_unit_size): New. * gdbarch.h: Re-generate. * gdbarch.c: Re-generate. |
||
Jan Kratochvil
|
7f36105668 |
compile: Use also inferior munmap
Currently inferior memory is allocated by inferior mmap() but it is never deallocated; despite the injected objfile incl. its symbols is freed. This was intentional so that one can do for example: inferior: char *str = "foo"; GDB: (gdb) compile code str = "bar"; I believe later patches will be needed to introduce full control over keeping vs. discarding the injected module as being discussed in: compile: objfiles lifetime UI https://sourceware.org/ml/gdb/2015-04/msg00051.html Message-ID: <20150429135735.GA16974@host1.jankratochvil.net> https://sourceware.org/ml/gdb/2015-05/msg00007.html As decided by Phil it is better not to leak inferior pages as users can workaround the issue above for example by: (gdb) compile code str = strdup ("bar"); I have checked that in fact gdb/doc/ (written by Phil) already expects the injected code will be unmapped so that does not need to be changed: compile code int ff = 5; p = &ff; In this example, @code{p} would point to @code{ff} when the @code{compile} command is executing the source code provided to it. However, as variables in the (example) program persist with their assigned values, the variable @code{p} would point to an invalid location when the command exists. gdb/ChangeLog 2015-04-28 Jan Kratochvil <jan.kratochvil@redhat.com> * arch-utils.c (default_infcall_munmap): New. * arch-utils.h (default_infcall_munmap): New declaration. * compile/compile-object-load.c (struct munmap_list, munmap_list_add) (munmap_list_free, munmap_listp_free_cleanup): New. (struct setup_sections_data): Add field munmap_list_headp. (setup_sections): Call munmap_list_add. (compile_object_load): New variable munmap_list_head, initialize setup_sections_data.munmap_list_headp, return munmap_list_head. * compile/compile-object-load.h (struct munmap_list): New declaration. (struct compile_module): Add field munmap_list_head. (munmap_list_free): New declaration. * compile/compile-object-run.c (struct do_module_cleanup): Add field munmap_list_head. (do_module_cleanup): Call munmap_list_free. (compile_object_run): Pass munmap_list_head to do_module_cleanup. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (infcall_munmap): New. * linux-tdep.c (linux_infcall_munmap): New. (linux_init_abi): Install it. gdb/testsuite/ChangeLog 2015-04-28 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.compile/compile.exp (keep jit in memory): Rename to ... (do not keep jit in memory): ... this. (expect 5): Change it to ... (expect no 5): ... this. |
||
Martin Galvan
|
c9cf6e20c6 |
Rename in_function_epilogue_p to stack_frame_destroyed_p
We concluded that gdbarch_in_function_epilogue_p is misnamed, since it returns true if the given PC is one instruction after the one that destroyed the stack (which isn't necessarily inside an epilogue), therefore it should be renamed to stack_frame_destroyed_p. I also took the liberty of renaming the arch-specific implementations to *_stack_frame_destroyed_p as well for consistency. gdb: 2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com> * amd64-tdep.c: Replace in_function_epilogue_p with stack_frame_destroyed_p throughout. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * arm-tdep.c: Ditto. * breakpoint.c: Ditto. * gdbarch.sh: Ditto. * hppa-tdep.c: Ditto. * i386-tdep.c: Ditto. * mips-tdep.c: Ditto. * nios2-tdep.c: Ditto. * rs6000-tdep.c: Ditto. * s390-linux-tdep.c: Ditto. * score-tdep.c: Ditto. * sh-tdep.c: Ditto. * sparc-tdep.c: Ditto. * sparc-tdep.h: Ditto. * sparc64-tdep.c: Ditto. * spu-tdep.c: Ditto. * tic6x-tdep.c: Ditto. * tilegx-tdep.c: Ditto. * xstormy16-tdep.c: Ditto. * gdbarch.c, gdbarch.h: Re-generated. |
||
Pedro Alves
|
8a526fa69a |
gdbarch.h: include regcache.h
Building GDB in C++ mode, I got: src/gdb/gdbarch.h:240:149: error: invalid type in declaration before ‘;’ token src/gdb/gdbarch.h:240:14: error: use of enum ‘register_status’ without previous declaration src/gdb/gdbarch.h:241:13: error: use of enum ‘register_status’ without previous declaration src/gdb/gdbarch.h:241:140: error: invalid type in declaration before ‘;’ token That's because 'enum register_status' has not been declared (and we can't forward declare enums in C++). gdb/ChangeLog: 2015-02-27 Pedro Alves <palves@redhat.com> * gdbarch.sh: Include regcache.h. * gdbarch.h: Regenerate. |
||
|
Pedro Alves
|
fe978cb071 |
C++ keyword cleanliness, mostly auto-generated
This patch renames symbols that happen to have names which are reserved keywords in C++. Most of this was generated with Tromey's cxx-conversion.el script. Some places where later hand massaged a bit, to fix formatting, etc. And this was rebased several times meanwhile, along with re-running the script, so re-running the script from scratch probably does not result in the exact same output. I don't think that matters anyway. gdb/ 2015-02-27 Tom Tromey <tromey@redhat.com> Pedro Alves <palves@redhat.com> Rename symbols whose names are reserved C++ keywords throughout. gdb/gdbserver/ 2015-02-27 Tom Tromey <tromey@redhat.com> Pedro Alves <palves@redhat.com> Rename symbols whose names are reserved C++ keywords throughout. |
||
Jose E. Marchesi
|
8b367e1771 |
New gdbarch functions: dtrace_parse_probe_argument, dtrace_probe_is_enabled, dtrace_enable_probe, dtrace_disable_probe.
This patch adds several gdbarch functions (along with the corresponding predicates): `dtrace_parse_probe_argument', `dtrace_probe_is_enabled', `dtrace_enable_probe' and `dtrace_disable_probe'. These functions will be implemented by target-specific code, and called from the DTrace probes implementation in order to calculate the value of probe arguments, and manipulate is-enabled probes. gdb/ChangeLog: 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com> * gdbarch.sh (dtrace_parse_probe_argument): New. (dtrace_probe_is_enabled): Likewise. (dtrace_enable_probe): Likewise. (dtrace_disable_probe): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. |
||
Andreas Arnez
|
1528345d6c |
Fix internal error when core file section is too big
As reported in PR 17808, a test case with a forged (invalid) core file can crash GDB with an assertion failure. In that particular case the prstatus of an i386 core file looks like that from an AMD64 core file. Consequently the respective regset supply function i386_supply_gregset is invoked with a larger buffer than usual. But i386_supply_gregset asserts a specific buffer size, and this assertion fails. The patch relaxes all buffer size assertions in regset supply functions such that they merely check for a sufficiently large buffer. For consistency the regset collect functions are adjusted as well. gdb/ChangeLog: PR corefiles/17808: * gdbarch.sh (iterate_over_regset_sections_cb): Document this function type, particularly its SIZE parameter. * gdbarch.h: Regenerate. * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare actual against required size using ">=" instead of "==". (amd64_collect_fpregset): Likewise. * i386-tdep.c (i386_supply_gregset): Likewise. (i386_collect_gregset): Likewise. (i386_supply_fpregset): Likewise. (i386_collect_fpregset): Likewise. * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise. (mips_fill_gregset_wrapper): Likewise. (mips_supply_fpregset_wrapper): Likewise. (mips_fill_fpregset_wrapper): Likewise. (mips64_supply_gregset_wrapper): Likewise. (mips64_fill_gregset_wrapper): Likewise. (mips64_supply_fpregset_wrapper): Likewise. (mips64_fill_fpregset_wrapper): Likewise. * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise. (am33_supply_fpregset_method): Likewise. (am33_collect_gregset_method): Likewise. (am33_collect_fpregset_method): Likewise. |
||
Joel Brobecker
|
32d0add0a6 |
Update year range in copyright notice of all files owned by the GDB project.
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
||
Yao Qi
|
cc86d1cb95 |
Refactor gdbarch method print_float_info
This patch is to change print_float_info gdbarch method for the
following two reasons,
1. we want to add a default implementation of print_float_info to
dump the float pointer registers. It can be reused by backend to
print something more than float point registers.
2. we want to simplify the caller of print_float_info,
infcmd.c:print_float_info.
gdb:
2014-12-18 Yao Qi <yao@codesourcery.com>
* gdbarch.sh (print_float_info): Change its type from 'M' to 'm'.
* gdbarch.c: Re-generated.
* gdbarch.h: Likewise.
* infcmd.c (default_print_float_info): New function.
(print_float_info): Removed. Move code to
default_print_float_info.
(float_info): Adjust to call gdbarch_print_float_info.
* inferior.h (default_print_float_info): Declare it.
|
||
Tom Tromey
|
ac04f72bb4 |
add gnu_triplet_regexp gdbarch method
gdb has to inform libcc1.so of the target being used, so that the correct compiler can be invoked. The compiler is invoked using the GNU configury triplet prefix, e.g., "x86_64-unknown-linux-gnu-gcc". In order for this to work we need to map the gdbarch to the GNU configury triplet arch. In most cases these are identical; however, the x86 family poses some problems, as the BFD arch names are quite different from the GNU triplet names. So, we introduce a new gdbarch method for this. A regular expression is used because there are various valid values for the arch prefix in the triplet. This patch also updates the osabi code to associate a regular expression with the OS ABI. I have only added a concrete value for Linux. Note that the "-gnu" part is optional, at least on Fedora it is omitted from the installed GCC executable's name. gdb/ChangeLog 2014-12-12 Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * osabi.h (osabi_triplet_regexp): Declare. * osabi.c (struct osabi_names): New. (gdb_osabi_names): Change type to struct osabi_names. Update values. (gdbarch_osabi_name): Update. (osabi_triplet_regexp): New function. (osabi_from_tdesc_string, _initialize_gdb_osabi): Update. * i386-tdep.c (i386_gnu_triplet_regexp): New method. (i386_elf_init_abi, i386_go32_init_abi, i386_gdbarch_init): Call set_gdbarch_gnu_triplet_regexp. * gdbarch.sh (gnu_triplet_regexp): New method. * gdbarch.c, gdbarch.h: Rebuild. * arch-utils.h (default_gnu_triplet_regexp): Declare. * arch-utils.c (default_gnu_triplet_regexp): New function. |
||
|
Jan Kratochvil
|
f208eee0f3 |
add infcall_mmap and gcc_target_options gdbarch methods
The compiler needed two new gdbarch methods. The infcall_mmap method allocates memory in the inferior. This is used when inserting the object code. The gcc_target_options method computes some arch-specific gcc options to pass to the compiler. This is used to ensure that gcc generates object code for the correct architecture. gdb/ChangeLog 2014-12-12 Jan Kratochvil <jan.kratochvil@redhat.com> * arch-utils.c (default_infcall_mmap) (default_gcc_target_options): New functions. * arch-utils.h (GDB_MMAP_PROT_READ, GDB_MMAP_PROT_WRITE) (GDB_MMAP_PROT_EXEC): Define. (default_infcall_mmap, default_gcc_target_options): Declare. * gdbarch.h: Rebuild. * gdbarch.c: Rebuild. * gdbarch.sh (infcall_mmap, gcc_target_options): New methods. |
||
Maciej W. Rozycki
|
3e29f34a4e |
MIPS: Keep the ISA bit in compressed code addresses
1. Background information The MIPS architecture, as originally designed and implemented in mid-1980s has a uniform instruction word size that is 4 bytes, naturally aligned. As such all MIPS instructions are located at addresses that have their bits #1 and #0 set to zeroes, and any attempt to execute an instruction from an address that has any of the two bits set to one causes an address error exception. This may for example happen when a jump-register instruction is executed whose register value used as the jump target has any of these bits set. Then in mid 1990s LSI sought a way to improve code density for their TinyRISC family of MIPS cores and invented an alternatively encoded instruction set in a joint effort with MIPS Technologies (then a subsidiary of SGI). The new instruction set has been named the MIPS16 ASE (Application-Specific Extension) and uses a variable instruction word size, which is 2 bytes (as the name of the ASE suggests) for most, but there are a couple of exceptions that take 4 bytes, and then most of the 2-byte instructions can be treated with a 2-byte extension prefix to expand the range of the immediate operands used. As a result instructions are no longer 4-byte aligned, instead they are aligned to a multiple of 2. That left the bit #0 still unused for code references, be it for the standard MIPS (i.e. as originally invented) or for the MIPS16 instruction set, and based on that observation a clever trick was invented that on one hand allowed the processor to be seamlessly switched between the two instruction sets at any time at the run time while on the other avoided the introduction of any special control register to do that. So it is the bit #0 of the instruction address that was chosen as the selector and named the ISA bit. Any instruction executed at an even address is interpreted as a standard MIPS instruction (the address still has to have its bit #1 clear), any instruction executed at an odd address is interpreted as a MIPS16 instruction. To switch between modes ordinary jump instructions are used, such as used for function calls and returns, specifically the bit #0 of the source register used in jump-register instructions selects the execution (ISA) mode for the following piece of code to be interpreted in. Additionally new jump-immediate instructions were added that flipped the ISA bit to select the opposite mode upon execution. They were considered necessary to avoid the need to make register jumps in all cases as the original jump-immediate instructions provided no way to change the bit #0 at all. This was all important for cases where standard MIPS and MIPS16 code had to be mixed, either for compatibility with the existing binary code base or to access resources not reachable from MIPS16 code (the MIPS16 instruction set only provides access to general-purpose registers, and not for example floating-point unit registers or privileged coprocessor 0 registers) -- pieces of code in the opposite mode can be executed as ordinary subroutine calls. A similar approach has been more recently adopted for the MIPS16 replacement instruction set defined as the so called microMIPS ASE. This is another instruction set encoding introduced to the MIPS architecture. Just like the MIPS16 ASE, the microMIPS instruction set uses a variable-length encoding, where each instruction takes a multiple of 2 bytes. The ISA bit has been reused and for microMIPS-capable processors selects between the standard MIPS and the microMIPS mode instead. 2. Statement of the problem To put it shortly, MIPS16 and microMIPS code pointers used by GDB are different to these observed at the run time. This results in the same expressions being evaluated producing different results in GDB and in the program being debugged. Obviously it's the results obtained at the run time that are correct (they define how the program behaves) and therefore by definition the results obtained in GDB are incorrect. A bit longer description will record that obviously at the run time the ISA bit has to be set correctly (refer to background information above if unsure why so) or the program will not run as expected. This is recorded in all the executable file structures used at the run time: the dynamic symbol table (but not always the static one!), the GOT, and obviously in all the addresses embedded in code or data of the program itself, calculated by applying the appropriate relocations at the static link time. While a program is being processed by GDB, the ISA bit is stripped off from any code addresses, presumably to make them the same as the respective raw memory byte address used by the processor to access the instruction in the instruction fetch access cycle. This stripping is actually performed outside GDB proper, in BFD, specifically _bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at the very bottom of that function, starting with an: "If this is an odd-valued function symbol, assume it's a MIPS16 or microMIPS one." comment). This function is also responsible for symbol table dumps made by `objdump' too, so you'll never see the ISA bit reported there by that tool, you need to use `readelf'. This is however unlike what is ever done at the run time, the ISA bit once present is never stripped off, for example a cast like this: (short *) main will not strip the ISA bit off and if the resulting pointer is intended to be used to access instructions as data, for example for software instruction decoding (like for fault recovery or emulation in a signal handler) or for self-modifying code then the bit still has to be stripped off by an explicit AND operation. This is probably best illustrated with a simple real program example. Let's consider the following simple program: $ cat foobar.c int __attribute__ ((mips16)) foo (void) { return 1; } int __attribute__ ((mips16)) bar (void) { return 2; } int __attribute__ ((nomips16)) foo32 (void) { return 3; } int (*foo32p) (void) = foo32; int (*foop) (void) = foo; int fooi = (int) foo; int main (void) { return foop (); } $ This is plain C with no odd tricks, except from the instruction mode attributes. They are not necessary to trigger this problem, I just put them here so that the program can be contained in a single source file and to make it obvious which function is MIPS16 code and which is not. Let's try it with Linux, so that everyone can repeat this experiment: $ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c $ Let's have a look at some interesting symbols: $ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar' Symbol table '.dynsym' contains 7 entries: Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar 68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p 70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop 78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32 80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo 88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi $ Hmm, no sight of the ISA bit, but notice how foo and bar (but not foo32!) have been marked as MIPS16 functions (ELF symbol structure's `st_other' field is used for that). So let's try to run and poke at this program with GDB. I'll be using a native system for simplicity (I'll be using ellipses here and there to remove unrelated clutter): $ ./foobar $ echo $? 1 $ So far, so good. $ gdb ./foobar [...] (gdb) break main Breakpoint 1 at 0x400490: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Yay, it worked! OK, so let's poke at it: (gdb) print main $1 = {int (void)} 0x400490 <main> (gdb) print foo32 $2 = {int (void)} 0x400684 <foo32> (gdb) print foo32p $3 = (int (*)(void)) 0x400684 <foo32> (gdb) print bar $4 = {int (void)} 0x40068c <bar> (gdb) print foo $5 = {int (void)} 0x400680 <foo> (gdb) print foop $6 = (int (*)(void)) 0x400681 <foo> (gdb) A-ha! Here's the difference and finally the ISA bit! (gdb) print /x fooi $7 = 0x400681 (gdb) p/x $pc p/x $pc $8 = 0x400491 (gdb) And here as well... (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 main () at foobar.c:24 24 } Value returned is $9 = 1 (gdb) continue Continuing. [Inferior 1 (process 14103) exited with code 01] (gdb) So let's be a bit inquisitive... (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Actually we do not like to run foo here at all. Let's run bar instead! (gdb) set foop = bar (gdb) print foop $10 = (int (*)(void)) 0x40068c <bar> (gdb) Hmm, no ISA bit. Is it going to work? (gdb) advance bar bar () at foobar.c:9 9 } (gdb) p/x $pc $11 = 0x40068c (gdb) disassemble Dump of assembler code for function bar: => 0x0040068c <+0>: jr ra 0x0040068e <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 Program received signal SIGILL, Illegal instruction. bar () at foobar.c:9 9 } (gdb) Oops! (gdb) p/x $pc $12 = 0x40068c (gdb) We're still there! (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) So let's try something else: (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: => 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 Program received signal SIGILL, Illegal instruction. foo () at foobar.c:4 4 } (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) The same problem! (gdb) run Starting program: /net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo32 (gdb) advance foo32 foo32 () at foobar.c:14 14 } (gdb) disassemble Dump of assembler code for function foo32: => 0x00400684 <+0>: jr ra 0x00400688 <+4>: li v0,3 End of assembler dump. (gdb) finish Run till exit from #0 foo32 () at foobar.c:14 main () at foobar.c:24 24 } Value returned is $14 = 3 (gdb) continue Continuing. [Inferior 1 (process 14113) exited with code 03] (gdb) That did work though, so it's the ISA bit only! (gdb) quit Enough! That's the tip of the iceberg only though. So let's rebuild the executable with some dynamic symbols: $ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c $ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar' Symbol table '.dynsym' contains 32 entries: 6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi $ OK, now the ISA bit is there for a change, but the MIPS16 `st_other' attribute gone, hmm... What does `objdump' do then: $ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar' foobar-dyn: file format elf32-tradbigmips SYMBOL TABLE: 00000000 l df *ABS* 00000000 foobar.c 004009cc g F .text 00000004 0xf0 bar 00410b88 g O .data 00000004 foo32p 00410b84 g O .data 00000004 foop 004009c4 g F .text 00000008 foo32 004009c0 g F .text 00000004 0xf0 foo 00410b80 g O .data 00000004 fooi DYNAMIC SYMBOL TABLE: 004009cc g DF .text 00000004 Base 0xf0 bar 00410b88 g DO .data 00000004 Base foo32p 00410b84 g DO .data 00000004 Base foop 004009c4 g DF .text 00000008 Base foo32 004009c0 g DF .text 00000004 Base 0xf0 foo 00410b80 g DO .data 00000004 Base fooi $ Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone again. Let's have a look at some DWARF-2 records GDB uses (I'll be stripping off a lot here for brevity) -- debug info: $ mips-linux-gnu-readelf -wi foobar Contents of the .debug_info section: [...] Compilation Unit @ offset 0x88: Length: 0xbb (32-bit) Version: 4 Abbrev Offset: 62 Pointer Size: 4 <0><93>: Abbrev Number: 1 (DW_TAG_compile_unit) <94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2 <98> DW_AT_language : 1 (ANSI C) <99> DW_AT_name : (indirect string, offset: 0x190): foobar.c <9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...] <a1> DW_AT_ranges : 0x0 <a5> DW_AT_low_pc : 0x0 <a9> DW_AT_stmt_list : 0x27 <1><ad>: Abbrev Number: 2 (DW_TAG_subprogram) <ae> DW_AT_external : 1 <ae> DW_AT_name : foo <b2> DW_AT_decl_file : 1 <b3> DW_AT_decl_line : 1 <b4> DW_AT_prototyped : 1 <b4> DW_AT_type : <0xc2> <b8> DW_AT_low_pc : 0x400680 <bc> DW_AT_high_pc : 0x400684 <c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <c2> DW_AT_GNU_all_call_sites: 1 <1><c2>: Abbrev Number: 3 (DW_TAG_base_type) <c3> DW_AT_byte_size : 4 <c4> DW_AT_encoding : 5 (signed) <c5> DW_AT_name : int <1><c9>: Abbrev Number: 4 (DW_TAG_subprogram) <ca> DW_AT_external : 1 <ca> DW_AT_name : (indirect string, offset: 0x18a): foo32 <ce> DW_AT_decl_file : 1 <cf> DW_AT_decl_line : 11 <d0> DW_AT_prototyped : 1 <d0> DW_AT_type : <0xc2> <d4> DW_AT_low_pc : 0x400684 <d8> DW_AT_high_pc : 0x40068c <dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <de> DW_AT_GNU_all_call_sites: 1 <1><de>: Abbrev Number: 2 (DW_TAG_subprogram) <df> DW_AT_external : 1 <df> DW_AT_name : bar <e3> DW_AT_decl_file : 1 <e4> DW_AT_decl_line : 6 <e5> DW_AT_prototyped : 1 <e5> DW_AT_type : <0xc2> <e9> DW_AT_low_pc : 0x40068c <ed> DW_AT_high_pc : 0x400690 <f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <f3> DW_AT_GNU_all_call_sites: 1 <1><f3>: Abbrev Number: 5 (DW_TAG_subprogram) <f4> DW_AT_external : 1 <f4> DW_AT_name : (indirect string, offset: 0x199): main <f8> DW_AT_decl_file : 1 <f9> DW_AT_decl_line : 21 <fa> DW_AT_prototyped : 1 <fa> DW_AT_type : <0xc2> <fe> DW_AT_low_pc : 0x400490 <102> DW_AT_high_pc : 0x4004a4 <106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <108> DW_AT_GNU_all_tail_call_sites: 1 [...] $ -- no sign of the ISA bit anywhere -- frame info: $ mips-linux-gnu-readelf -wf foobar [...] Contents of the .debug_frame section: 00000000 0000000c ffffffff CIE Version: 1 Augmentation: "" Code alignment factor: 1 Data alignment factor: -4 Return address column: 31 DW_CFA_def_cfa_register: r29 DW_CFA_nop 00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684 00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c 00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690 00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4 DW_CFA_advance_loc: 6 to 00400496 DW_CFA_def_cfa_offset: 32 DW_CFA_offset: r31 at cfa-4 DW_CFA_advance_loc: 6 to 0040049c DW_CFA_restore: r31 DW_CFA_def_cfa_offset: 0 DW_CFA_nop DW_CFA_nop DW_CFA_nop [...] $ -- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange): $ mips-linux-gnu-readelf -wR foobar Contents of the .debug_ranges section: Offset Begin End 00000000 00400680 00400690 00000000 00400490 004004a4 00000000 <End of list> $ -- no sign of the ISA bit anywhere -- line info: $ mips-linux-gnu-readelf -wl foobar Raw dump of debug contents of section .debug_line: [...] Offset: 0x27 Length: 78 DWARF Version: 2 Prologue Length: 31 Minimum Instruction Length: 1 Initial value of 'is_stmt': 1 Line Base: -5 Line Range: 14 Opcode Base: 13 Opcodes: Opcode 1 has 0 args Opcode 2 has 1 args Opcode 3 has 1 args Opcode 4 has 1 args Opcode 5 has 1 args Opcode 6 has 0 args Opcode 7 has 0 args Opcode 8 has 0 args Opcode 9 has 1 args Opcode 10 has 0 args Opcode 11 has 0 args Opcode 12 has 1 args The Directory Table is empty. The File Name Table: Entry Dir Time Size Name 1 0 0 0 foobar.c Line Number Statements: Extended opcode 2: set Address to 0x400681 Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2 Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4 Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12 Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14 Advance Line by -7 to 7 Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7 Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9 Advance PC by 3 to 0x400690 Extended opcode 1: End of Sequence Extended opcode 2: set Address to 0x400491 Advance Line by 21 to 22 Copy Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23 Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22 Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23 Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24 Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23 Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24 Advance PC by 7 to 0x4004a4 Extended opcode 1: End of Sequence [...] -- a-ha, the ISA bit is there! However it's not always right for some reason, I don't have a small test case to show it, but here's an excerpt from MIPS16 libc, a prologue of a function: 00019630 <__libc_init_first>: 19630: e8a0 jrc ra 19632: 6500 nop 00019634 <_init>: 19634: f000 6a11 li v0,17 19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54> 1963c: f400 3240 sll v0,16 19640: e269 addu v0,v1 19642: 659a move gp,v0 19644: 64f6 save 48,ra,s0-s1 19646: 671c move s0,gp 19648: d204 sw v0,16(sp) 1964a: f352 984c lw v0,-27828(s0) 1964e: 6724 move s1,a0 and the corresponding DWARF-2 line info: Line Number Statements: Extended opcode 2: set Address to 0x19631 Advance Line by 44 to 45 Copy Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48 Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53 Advance PC by constant 17 to 0x19646 Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53 Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53 -- see that "Advance PC by constant 17" there? It clears the ISA bit, however code at 0x19646 is not standard MIPS code at all. For some reason the constant is always 17, I've never seen DW_LNS_const_add_pc used with any other value -- is that a binutils bug or what? 3. Solution: I think we should retain the value of the ISA bit in code references, that is effectively treat them as cookies as they indeed are (although trivially calculated) rather than raw memory byte addresses. In a perfect world both the static symbol table and the respective DWARF-2 records should be fixed to include the ISA bit in all the cases. I think however that this is infeasible. All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be tracked down. This function is used by `elf_slurp_symbol_table' that in turn is used by `bfd_canonicalize_symtab' and `bfd_canonicalize_dynamic_symtab', which are public interfaces. Similarly DWARF-2 records are used outside GDB, one notable if a bit questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have identified at least bits in `execute_cfa_program' and `uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame', that would need an update as they effectively flip the ISA bit freely; see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h. But there may be more places. Any change in how DWARF-2 records are produced would require an update there and would cause compatibility problems with libgcc.a binaries already distributed; given that this is a static library a complex change involving function renames would likely be required. I propose therefore to accept the existing inconsistencies and deal with them entirely within GDB. I have figured out that the ISA bit lost in various places can still be recovered as long as we have symbol information -- that'll have the `st_other' attribute correctly set to one of standard MIPS/MIPS16/microMIPS encoding. Here's the resulting change. It adds a couple of new `gdbarch' hooks, one to update symbol information with the ISA bit lost in `_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2 records as they're processed. The ISA bit is set in each address handled according to information retrieved from the symbol table for the symbol spanning the address if any; limits are adjusted based on the address they point to related to the respective base address. Additionally minimal symbol information has to be adjusted accordingly in its gdbarch hook. With these changes in place some complications with ISA bit juggling in the PC that never fully worked can be removed from the MIPS backend. Conversely, the generic dynamic linker event special breakpoint symbol handler has to be updated to call the minimal symbol gdbarch hook to record that the symbol is a MIPS16 or microMIPS address if applicable or the breakpoint will be set at the wrong address and either fail to work or cause SIGTRAPs (this is because the symbol is handled early on and bypasses regular symbol processing). 4. Results obtained The change fixes the example above -- to repeat only the crucial steps: (gdb) break main Breakpoint 1 at 0x400491: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) print foo $1 = {int (void)} 0x400681 <foo> (gdb) set foop = bar (gdb) advance bar bar () at foobar.c:9 9 } (gdb) disassemble Dump of assembler code for function bar: => 0x0040068d <+0>: jr ra 0x0040068f <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 main () at foobar.c:24 24 } Value returned is $2 = 2 (gdb) continue Continuing. [Inferior 1 (process 14128) exited with code 02] (gdb) -- excellent! The change removes about 90 failures per MIPS16 multilib in mips-sde-elf testing too, results for MIPS16 are now similar to that for standard MIPS; microMIPS results are a bit worse because of host-I/O problems in QEMU used instead of MIPSsim for microMIPS testing only: === gdb Summary === # of expected passes 14299 # of unexpected failures 187 # of expected failures 56 # of known failures 58 # of unresolved testcases 11 # of untested testcases 52 # of unsupported tests 174 MIPS16: === gdb Summary === # of expected passes 14298 # of unexpected failures 187 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 12 # of untested testcases 52 # of unsupported tests 174 microMIPS: === gdb Summary === # of expected passes 14149 # of unexpected failures 201 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 7 # of untested testcases 53 # of unsupported tests 175 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> Maciej W. Rozycki <macro@mips.com> Pedro Alves <pedro@codesourcery.com> gdb/ * gdbarch.sh (elf_make_msymbol_special): Change type to `F', remove `predefault' and `invalid_p' initializers. (make_symbol_special): New architecture method. (adjust_dwarf2_addr, adjust_dwarf2_line): Likewise. (objfile, symbol): New declarations. * arch-utils.h (default_elf_make_msymbol_special): Remove prototype. (default_make_symbol_special): New prototype. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * mips-tdep.h (mips_unmake_compact_addr): New prototype. * arch-utils.c (default_elf_make_msymbol_special): Remove function. (default_make_symbol_special): New function. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * dwarf2-frame.c (decode_frame_entry_1): Call `gdbarch_adjust_dwarf2_addr'. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. * dwarf2read.c (create_addrmap_from_index): Likewise. (process_psymtab_comp_unit_reader): Likewise. (add_partial_symbol): Likewise. (add_partial_subprogram): Likewise. (process_full_comp_unit): Likewise. (read_file_scope): Likewise. (read_func_scope): Likewise. Call `gdbarch_make_symbol_special'. (read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'. (read_call_site_scope): Likewise. (dwarf2_ranges_read): Likewise. (dwarf2_record_block_ranges): Likewise. (read_attribute_value): Likewise. (dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'. (new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'. * elfread.c (elf_symtab_read): Don't call `gdbarch_elf_make_msymbol_special' if unset. * mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip the ISA bit from the PC. * mips-tdep.c (mips_unmake_compact_addr): New function. (mips_elf_make_msymbol_special): Set the ISA bit in the symbol's address appropriately. (mips_make_symbol_special): New function. (mips_pc_is_mips): Set the ISA bit before symbol lookup. (mips_pc_is_mips16): Likewise. (mips_pc_is_micromips): Likewise. (mips_pc_isa): Likewise. (mips_adjust_dwarf2_addr): New function. (mips_adjust_dwarf2_line): Likewise. (mips_read_pc, mips_unwind_pc): Keep the ISA bit. (mips_addr_bits_remove): Likewise. (mips_skip_trampoline_code): Likewise. (mips_write_pc): Don't set the ISA bit. (mips_eabi_push_dummy_call): Likewise. (mips_o64_push_dummy_call): Likewise. (mips_gdbarch_init): Install `mips_make_symbol_special', `mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch handlers. * solib.c (gdb_bfd_lookup_symbol_from_symtab): Get target-specific symbol address adjustments. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> gdb/testsuite/ * gdb.base/func-ptrs.c: New file. * gdb.base/func-ptrs.exp: New file. |
||
Sergio Durigan Junior
|
458c8db89f |
Partial fix for PR breakpoints/10737: Make syscall info be per-arch instead of global
This patch intends to partially fix PR breakpoints/10737, which is about making the syscall information (for the "catch syscall" command) be per-arch, instead of global. This is not a full fix because of the other issues pointed by Pedro here: <https://sourceware.org/bugzilla/show_bug.cgi?id=10737#c5> However, I consider it a good step towards the real fix. It will also help me fix <https://sourceware.org/bugzilla/show_bug.cgi?id=17402>. What this patch does, basically, is move the "syscalls_info" struct to gdbarch. Currently, the syscall information is stored in a global variable inside gdb/xml-syscall.c, which means that there is no easy way to correlate this info with the current target or architecture being used, for example. This causes strange behaviors, because the syscall info is not re-read when the arch changes. For example, if you put a syscall catchpoint in syscall 5 on i386 (syscall open), and then load a x86_64 program on GDB and put the same syscall 5 there (fstat on x86_64), you will still see that GDB tells you that it is catching "open", even though it is not. With this patch, GDB correctly says that it will be catching fstat syscalls. (gdb) set architecture i386 The target architecture is assumed to be i386 (gdb) catch syscall 5 Catchpoint 1 (syscall 'open' [5]) (gdb) set architecture i386:x86-64 The target architecture is assumed to be i386:x86-64 (gdb) catch syscall 5 Catchpoint 2 (syscall 'open' [5]) But with the patch: (gdb) set architecture i386 The target architecture is assumed to be i386 (gdb) catch syscall 5 Catchpoint 1 (syscall 'open' [5]) (gdb) set architecture i386:x86-64 The target architecture is assumed to be i386:x86-64 (gdb) catch syscall 5 Catchpoint 2 (syscall 'fstat' [5]) As I said, there are still some problems on the "catch syscall" mechanism, because (for example) the user should be able to "catch syscall open" on i386, and then expect "open" to be caught also on x86_64. Currently, it doesn't work. I intend to work on this later. gdb/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Adjust call to set_xml_syscall_file_name to provide gdbarch. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * bfin-linux-tdep.c (bfin_linux_init_abi): Likewise. * breakpoint.c (print_it_catch_syscall): Adjust call to get_syscall_by_number to provide gdbarch. (print_one_catch_syscall): Likewise. (print_mention_catch_syscall): Likewise. (print_recreate_catch_syscall): Likewise. (catch_syscall_split_args): Adjust calls to get_syscall_by_number and get_syscall_by_name to provide gdbarch. (catch_syscall_completer): Adjust call to get_syscall_names to provide gdbarch. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * gdbarch.sh: Forward declare "struct syscalls_info". (xml_syscall_file): New variable. (syscalls_info): Likewise. * i386-linux-tdep.c (i386_linux_init_abi): Adjust call to set_xml_syscall_file_name to provide gdbarch. * mips-linux-tdep.c (mips_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise. * sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise. * xml-syscall.c: Include gdbarch.h. (set_xml_syscall_file_name): Accept gdbarch parameter. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. (my_gdb_datadir): Delete global variable. (struct syscalls_info) <my_gdb_datadir>: New variable. (struct syscalls_info) <sysinfo>: Rename variable to "syscalls_info". (sysinfo): Delete global variable. (have_initialized_sysinfo): Likewise. (xml_syscall_file): Likewise. (sysinfo_free_syscalls_desc): Rename to... (syscalls_info_free_syscalls_desc): ... this. (free_syscalls_info): Rename "sysinfo" to "syscalls_info". Adjust code to the new layout of "struct syscalls_info". (make_cleanup_free_syscalls_info): Rename parameter "sysinfo" to "syscalls_info". (syscall_create_syscall_desc): Likewise. (syscall_start_syscall): Likewise. (syscall_parse_xml): Likewise. (xml_init_syscalls_info): Likewise. Drop "const" from return value. (init_sysinfo): Rename to... (init_syscalls_info): ...this. Add gdbarch as a parameter. Adjust function to deal with gdbarch. (xml_get_syscall_number): Delete parameter sysinfo. Accept gdbarch as a parameter. Adjust code. (xml_get_syscall_name): Likewise. (xml_list_of_syscalls): Likewise. (set_xml_syscall_file_name): Accept gdbarch as parameter. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. * xml-syscall.h (set_xml_syscall_file_name): Likewise. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. gdb/testsuite/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * gdb.base/catch-syscall.exp (do_syscall_tests): Call test_catch_syscall_multi_arch. (test_catch_syscall_multi_arch): New function. |
||
|
Pedro Alves
|
ae9bb220ca |
add a default method for gdbarch_skip_permanent_breakpoint
breakpoint.c uses gdbarch_breakpoint_from_pc to determine whether a
breakpoint location points at a permanent breakpoint:
static int
bp_loc_is_permanent (struct bp_location *loc)
{
...
addr = loc->address;
bpoint = gdbarch_breakpoint_from_pc (loc->gdbarch, &addr, &len);
...
if (target_read_memory (loc->address, target_mem, len) == 0
&& memcmp (target_mem, bpoint, len) == 0)
retval = 1;
...
So I think we should default the gdbarch_skip_permanent_breakpoint
hook to advancing the PC by the length of the breakpoint instruction,
as determined by gdbarch_breakpoint_from_pc. I believe that simple
implementation does the right thing for most architectures. If
there's an oddball architecture where that doesn't work, then it
should override the hook, just like it should be overriding the hook
if there was no default anyway.
The only two implementation of skip_permanent_breakpoint are
i386_skip_permanent_breakpoint, for x86, and
hppa_skip_permanent_breakpoint, for PA-RISC/HP-UX
The x86 implementation is trivial, and can clearly be replaced by the
new default.
I don't know about the HP-UX one though, I know almost nothing about
PA. It may well be advancing the PC ends up being equivalent.
Otherwise, it must be that "jump $pc_after_bp" doesn't work either...
Tested on x86_64 Fedora 20 native and gdbserver.
gdb/
2014-11-12 Pedro Alves <palves@redhat.com>
* arch-utils.c (default_skip_permanent_breakpoint): New function.
* arch-utils.h (default_skip_permanent_breakpoint): New
declaration.
* gdbarch.sh (skip_permanent_breakpoint): Now an 'f' function.
Install default_skip_permanent_breakpoint as default method.
* i386-tdep.c (i386_skip_permanent_breakpoint): Delete function.
(i386_gdbarch_init): Don't install it.
* infrun.c (resume): Assume there's always a
gdbarch_skip_permanent_breakpoint implementation.
* gdbarch.h, gdbarch.c: Regenerate.
|
||
|
Pedro Alves
|
3437254d7b |
Split vDSO range lookup to a gdbarch hook
We have a case in solib-svr4.c where we could reuse symfile-mem.c's vDSO range lookup. Since symfile-mem.c is not present in all configurations solib-svr4.c is, move that lookup to a gdbarch hook. This has the minor (good) side effect that we stop even trying the target_auxv_search lookup against targets that don't have a concept of a vDSO, in case symfile-mem.c happens to be linked in the build (--enable-targets=all). Tested on x86_64 Fedora 20. gdb/ 2014-10-10 Pedro Alves <palves@redhat.com> * arch-utils.c (default_vsyscall_range): New function. * arch-utils.h (default_vsyscall_range): New declaration. * gdbarch.sh (vsyscall_range): New hook. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c (linux_vsyscall_range): New function. (linux_init_abi): Install linux_vsyscall_range as vsyscall_range gdbarch hook. * memrange.c (address_in_mem_range): New function. * memrange.h (address_in_mem_range): New declaration. * symfile-mem.c (find_vdso_size): Delete function. (add_vsyscall_page): Use gdbarch_vsyscall_range. |
||
|
Andreas Arnez
|
29082443fc |
Drop 'regset_from_core_section' gdbarch method
Now that all instances of the regset_from_core_section gdbarch method have been replaced by the new iterator method, delete the obsolete method from the gdbarch interface. Adjust all invocations and references to it. gdb/ChangeLog: * gdbarch.sh (regset_from_core_section): Remove gdbarch method. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * corelow.c (sniff_core_bfd): Drop presence check for deleted gdbarch method 'regset_from_core_section'. (get_core_register_section): Remove handling for the case that regset == NULL and regset_from_core_section is defined. (get_core_registers): Drop check for deleted method. * procfs.c (procfs_do_thread_registers): Adjust comment. |
||
|
Andreas Arnez
|
8f0435f75e |
Add 'regset' parameter to 'iterate_over_regset_sections_cb'
This adds the 'regset' parameter to the iterator callback. Consequently the 'regset_from_core_section' method is dropped for all targets that provide the iterator method. This change prepares for replacing regset_from_core_section everywhere, thereby eliminating one gdbarch interface. Since the iterator is usually no more complex than regset_from_core_section alone, targets that previously didn't define core_regset_sections will then gain multi-arch capable core file generation support without increased complexity. gdb/ChangeLog: * gdbarch.sh (iterate_over_regset_sections_cb): Add regset parameter. * gdbarch.h: Regenerate. * corelow.c (sniff_core_bfd): Don't sniff if gdbarch has a regset iterator. (get_core_register_section): Add parameter 'regset' and use it, if set. Add parameter 'min_size' and verify the bfd section size against it. (get_core_registers_cb): Add parameter 'regset' and pass it to get_core_register section. For the "standard" register sections ".reg" and ".reg2", set an appropriate default for human_name. (get_core_registers): Don't abort when the gdbarch has an iterator but no regset_from_core_section. Add NULL/0 for parameters 'regset'/'min_size' in calls to get_core_register_section. * linux-tdep.c (linux_collect_regset_section_cb): Add parameter 'regset' and use it instead of calling the regset_from_core_section gdbarch method. * i386-tdep.h (struct gdbarch_tdep): Add field 'fpregset'. * i386-tdep.c (i386_supply_xstateregset) (i386_collect_xstateregset, i386_xstateregset): Moved to i386-linux-tdep.c. (i386_regset_from_core_section): Drop handling for .reg-xfp and .reg-xstate. (i386_gdbarch_init): Set tdep field 'fpregset'. Enable generic core file support only if the regset iterator hasn't been set. * i386-linux-tdep.c (i386_linux_supply_xstateregset) (i386_linux_collect_xstateregset, i386_linux_xstateregset): New. Moved from i386-tdep.c and renamed to *_linux*. (i386_linux_iterate_over_regset_sections): Add regset parameter to each callback invocation. Allow any .reg-xstate size when reading from a core file. * amd64-tdep.c (amd64_supply_xstateregset) (amd64_collect_xstateregset, amd64_xstateregset): Moved to amd64-linux-tdep.c. (amd64_regset_from_core_section): Remove. (amd64_init_abi): Set new tdep field 'fpregset'. No longer install an amd64-specific regset_from_core_section gdbarch method. * amd64-linux-tdep.c (amd64_linux_supply_xstateregset) (amd64_linux_collect_xstateregset, amd64_linux_xstateregset): New. Moved from amd64-tdep.c and renamed to *_linux*. (amd64_linux_iterate_over_regset_sections): Add regset parameter to each callback invocation. Allow any .reg-xstate size when reading from a core file. * arm-linux-tdep.c (arm_linux_regset_from_core_section): Remove. (arm_linux_iterate_over_regset_sections): Add regset parameter to each callback invocation. (arm_linux_init_abi): No longer set the regset_from_core_section gdbarch method. * ppc-linux-tdep.c (ppc_linux_regset_from_core_section): Remove. (ppc_linux_iterate_over_regset_sections): Add regset parameter to each callback invocation. (ppc_linux_init_abi): No longer set the regset_from_core_section gdbarch method. * s390-linux-tdep.c (struct gdbarch_tdep): Remove the fields gregset, sizeof_gregset, fpregset, and sizeof_fpregset. (s390_regset_from_core_section): Remove. (s390_iterate_over_regset_sections): Add regset parameter to each callback invocation. (s390_gdbarch_init): No longer set the regset_from_core_section gdbarch method. Drop initialization of deleted tdep fields. |
||
|
Andreas Arnez
|
5aa82d050d |
Replace 'core_regset_sections' by iterator method
The core_regset_sections list in gdbarch (needed for multi-arch capable core file generation support) is replaced by an iterator method. Overall, this reduces the code a bit, and it allows for more flexibility. gdb/ChangeLog: * amd64-linux-tdep.c (amd64_linux_regset_sections): Remove. (amd64_linux_iterate_over_regset_sections): New. (amd64_linux_init_abi_common): Don't install the regset section list, but the new iterator in gdbarch. * arm-linux-tdep.c (arm_linux_fpa_regset_sections) (arm_linux_vfp_regset_sections): Remove. Move combined logic... (arm_linux_iterate_over_regset_sections): ...here. New function. (arm_linux_init_abi): Set iterator instead of section list. * corelow.c (get_core_registers_cb): New function, logic moved from... (get_core_registers): ...loop body here. Use new iterator method instead of walking through the regset section list. * gdbarch.sh: Remove 'core_regset_sections'. New method 'iterate_over_regset_sections'. New typedef 'iterate_over_regset_sections_cb'. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * i386-linux-tdep.c (i386_linux_regset_sections) (i386_linux_sse_regset_sections, i386_linux_avx_regset_sections): Remove. (i386_linux_iterate_over_regset_sections): New. (i386_linux_init_abi): Don't choose a regset section list, but install new iterator in gdbarch. * linux-tdep.c (struct linux_collect_regset_section_cb_data): New. (linux_collect_regset_section_cb): New function, logic moved from... (linux_collect_thread_registers): ...loop body here. Use iterator method instead of walking through list. (linux_make_corefile_notes_1): Check for presence of iterator method instead of regset section list. * ppc-linux-tdep.c (ppc_linux_vsx_regset_sections) (ppc_linux_vmx_regset_sections, ppc_linux_fp_regset_sections) (ppc64_linux_vsx_regset_sections, ppc64_linux_vmx_regset_sections) (ppc64_linux_fp_regset_sections): Remove. Move combined logic... (ppc_linux_iterate_over_regset_sections): ...here. New function. (ppc_linux_init_abi): Don't choose from above regset section lists, but install new iterator in gdbarch. * regset.h (struct core_regset_section): Remove. * s390-linux-tdep.c (struct gdbarch_tdep): Add new fields have_linux_v1, have_linux_v2, and have_tdb. (s390_linux32_regset_sections, s390_linux32v1_regset_sections) (s390_linux32v2_regset_sections, s390_linux64_regset_sections) (s390_linux64v1_regset_sections, s390_linux64v2_regset_sections) (s390x_linux64_regset_sections, s390x_linux64v1_regset_sections) (s390x_linux64v2_regset_sections): Remove. Move combined logic... (s390_iterate_over_regset_sections): ...here. New function. Use new tdep fields. (s390_gdbarch_init): Set new tdep fields. Don't choose from above regset section lists, but install new iterator. |
||
|
Joel Brobecker
|
eb7a547ad4 |
Add "frame.h" #include in gdbarch.h.
This include is needed because gdbarch_dummy_id needs the full
definition of struct frame_id.
gdb/ChangeLog:
* gdbarch.sh: #include "frame.h" in gdbarch.h. Delete "struct
frame_info" partial declaration.
* gdbarch.h: Regenerate.
Tested on x86_64-linux by rebuilding GDB.
|
||
Gary Benson
|
6d3d12ebef |
Include string.h in common-defs.h
This commit includes string.h in common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include string.h. * aarch64-tdep.c: Do not include string.h. * ada-exp.y: Likewise. * ada-lang.c: Likewise. * ada-lex.l: Likewise. * ada-typeprint.c: Likewise. * ada-valprint.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alpha-nat.c: Likewise. * alpha-osf1-tdep.c: Likewise. * alpha-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-dicos-tdep.c: Likewise. * amd64-linux-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-sol2-tdep.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-linux-nat.c: Likewise. * arm-linux-tdep.c: Likewise. * arm-tdep.c: Likewise. * arm-wince-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * armnbsd-nat.c: Likewise. * armnbsd-tdep.c: Likewise. * armobsd-tdep.c: Likewise. * avr-tdep.c: Likewise. * ax-gdb.c: Likewise. * ax-general.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * breakpoint.c: Likewise. * build-id.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * c-typeprint.c: Likewise. * c-valprint.c: Likewise. * charset.c: Likewise. * cli-out.c: Likewise. * cli/cli-cmds.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-interp.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-setshow.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/agent.c: Likewise. * common/buffer.c: Likewise. * common/buffer.h: Likewise. * common/common-utils.c: Likewise. * common/filestuff.c: Likewise. * common/filestuff.c: Likewise. * common/format.c: Likewise. * common/print-utils.c: Likewise. * common/rsp-low.c: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * common/xml-utils.c: Likewise. * core-regset.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-support.c: Likewise. * cp-valprint.c: Likewise. * cris-tdep.c: Likewise. * d-exp.y: Likewise. * darwin-nat.c: Likewise. * dbxread.c: Likewise. * dcache.c: Likewise. * demangle.c: Likewise. * dicos-tdep.c: Likewise. * disasm.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * elfread.c: Likewise. * environ.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * exec.c: Likewise. * expprint.c: Likewise. * f-exp.y: Likewise. * f-lang.c: Likewise. * f-typeprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findcmd.c: Likewise. * findvar.c: Likewise. * fork-child.c: Likewise. * frame.c: Likewise. * frv-linux-tdep.c: Likewise. * frv-tdep.c: Likewise. * gdb.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v2-abi.c: Likewise. * gnu-v3-abi.c: Likewise. * go-exp.y: Likewise. * go-lang.c: Likewise. * go32-nat.c: Likewise. * guile/guile.c: Likewise. * guile/scm-auto-load.c: Likewise. * hppa-hpux-tdep.c: Likewise. * hppa-linux-nat.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-cygwin-tdep.c: Likewise. * i386-dicos-tdep.c: Likewise. * i386-linux-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-sol2-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-linux-nat.c: Likewise. * inf-child.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * inflow.c: Likewise. * infrun.c: Likewise. * interps.c: Likewise. * iq2000-tdep.c: Likewise. * irix5-nat.c: Likewise. * jv-exp.y: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * jv-valprint.c: Likewise. * language.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * lm32-tdep.c: Likewise. * m2-exp.y: Likewise. * m2-typeprint.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-linux-tdep.c: Likewise. * m32r-rom.c: Likewise. * m32r-tdep.c: Likewise. * m68hc11-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-tdep.c: Likewise. * m68klinux-nat.c: Likewise. * m68klinux-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macrocmd.c: Likewise. * main.c: Likewise. * mdebugread.c: Likewise. * mem-break.c: Likewise. * memattr.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-cmd-break.c: Likewise. * mi/mi-cmd-disas.c: Likewise. * mi/mi-cmd-env.c: Likewise. * mi/mi-cmd-stack.c: Likewise. * mi/mi-cmd-var.c: Likewise. * mi/mi-cmds.c: Likewise. * mi/mi-console.c: Likewise. * mi/mi-getopt.c: Likewise. * mi/mi-interp.c: Likewise. * mi/mi-main.c: Likewise. * mi/mi-parse.c: Likewise. * microblaze-rom.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * minidebug.c: Likewise. * minsyms.c: Likewise. * mips-irix-tdep.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mipsread.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * monitor.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-procfs.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/linux-waitpid.c: Likewise. * nbsd-tdep.c: Likewise. * nios2-linux-tdep.c: Likewise. * nto-procfs.c: Likewise. * nto-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * osdata.c: Likewise. * p-exp.y: Likewise. * p-lang.c: Likewise. * p-typeprint.c: Likewise. * parse.c: Likewise. * posix-hdep.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * python/py-auto-load.c: Likewise. * python/py-gdb-readline.c: Likewise. * ravenscar-thread.c: Likewise. * regcache.c: Likewise. * registry.c: Likewise. * remote-fileio.c: Likewise. * remote-m32r-sdi.c: Likewise. * remote-mips.c: Likewise. * remote-notif.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * reverse.c: Likewise. * rs6000-aix-tdep.c: Likewise. * ser-base.c: Likewise. * ser-go32.c: Likewise. * ser-mingw.c: Likewise. * ser-pipe.c: Likewise. * ser-tcp.c: Likewise. * ser-unix.c: Likewise. * serial.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * shnbsd-tdep.c: Likewise. * skip.c: Likewise. * sol-thread.c: Likewise. * solib-dsbt.c: Likewise. * solib-frv.c: Likewise. * solib-osf.c: Likewise. * solib-som.c: Likewise. * solib-spu.c: Likewise. * solib-target.c: Likewise. * solib.c: Likewise. * somread.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * spu-linux-nat.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * std-regs.c: Likewise. * symfile.c: Likewise. * symmisc.c: Likewise. * symtab.c: Likewise. * target.c: Likewise. * thread.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tracepoint.c: Likewise. * tui/tui-command.c: Likewise. * tui/tui-data.c: Likewise. * tui/tui-disasm.c: Likewise. * tui/tui-file.c: Likewise. * tui/tui-layout.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-regs.c: Likewise. * tui/tui-source.c: Likewise. * tui/tui-stack.c: Likewise. * tui/tui-win.c: Likewise. * tui/tui-windata.c: Likewise. * tui/tui-winsource.c: Likewise. * typeprint.c: Likewise. * ui-file.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valarith.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-tdep.c: Likewise. * vaxnbsd-tdep.c: Likewise. * vaxobsd-tdep.c: Likewise. * windows-nat.c: Likewise. * xcoffread.c: Likewise. * xml-support.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include string.h. * event-loop.c: Likewise. * linux-low.c: Likewise. * regcache.c: Likewise. * remote-utils.c: Likewise. * spu-low.c: Likewise. * utils.c: Likewise. |
||
|
Gary Benson
|
dccbb60975 |
Include gdb_assert.h in common-defs.h
This commit includes gdb_assert.h in common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include gdb_assert.h. * aarch64-tdep.c: Do not include gdb_assert.h. * addrmap.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-tdep.c: Likewise. * amd64bsd-nat.c: Likewise. * amd64fbsd-nat.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64nbsd-nat.c: Likewise. * amd64nbsd-tdep.c: Likewise. * amd64obsd-nat.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * auxv.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * blockframe.c: Likewise. * breakpoint.c: Likewise. * bsd-kvm.c: Likewise. * bsd-uthread.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * charset.c: Likewise. * cleanups.c: Likewise. * cli-out.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/common-utils.c: Likewise. * common/queue.h: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * complaints.c: Likewise. * completer.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-namespace.c: Likewise. * cp-support.c: Likewise. * cris-tdep.c: Likewise. * dbxread.c: Likewise. * dictionary.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame-tailcall.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2expr.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * expprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findvar.c: Likewise. * frame-unwind.c: Likewise. * frame.c: Likewise. * frv-tdep.c: Likewise. * gcore.c: Likewise. * gdb-dlfcn.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v3-abi.c: Likewise. * go-lang.c: Likewise. * guile/scm-exception.c: Likewise. * guile/scm-gsmob.c: Likewise. * guile/scm-lazy-string.c: Likewise. * guile/scm-math.c: Likewise. * guile/scm-pretty-print.c: Likewise. * guile/scm-safe-call.c: Likewise. * guile/scm-utils.c: Likewise. * guile/scm-value.c: Likewise. * h8300-tdep.c: Likewise. * hppa-hpux-nat.c: Likewise. * hppa-tdep.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-darwin-nat.c: Likewise. * i386-darwin-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-nat.c: Likewise. * i386fbsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-tdep.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * infrun.c: Likewise. * inline-frame.c: Likewise. * interps.c: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * linux-thread-db.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-nat.c: Likewise. * m68kbsd-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macroexp.c: Likewise. * macrotab.c: Likewise. * maint.c: Likewise. * mdebugread.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-common.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * mips-linux-nat.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/mips-linux-watch.c: Likewise. * nios2-linux-tdep.c: Likewise. * nios2-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * obsd-nat.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * parse.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-nat.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-nat.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-nat.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * psymtab.c: Likewise. * python/py-lazy-string.c: Likewise. * python/py-value.c: Likewise. * regcache.c: Likewise. * reggroups.c: Likewise. * registry.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * rs6000-aix-tdep.c: Likewise. * rs6000-tdep.c: Likewise. * s390-linux-tdep.c: Likewise. * score-tdep.c: Likewise. * ser-base.c: Likewise. * ser-mingw.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * solib-darwin.c: Likewise. * solib-spu.c: Likewise. * solib-svr4.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-sol2-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparc64obsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * sparcobsd-tdep.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * symfile.c: Likewise. * symtab.c: Likewise. * target-descriptions.c: Likewise. * target-memory.c: Likewise. * target.c: Likewise. * tic6x-linux-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tramp-frame.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-winsource.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valops.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-nat.c: Likewise. * xml-syscall.c: Likewise. * xml-tdesc.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. * xtensa-tdep.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include gdb_assert.h. |
||
|
Tom Tromey
|
7bc112c1b9 |
constify to_info_proc and friends
This makes a parameter of to_info_proc const and then fixes up some fallout, including parameters in a couple of gdbarch methods. I could not test the procfs.c change. I verified it by inspection. If this causes an error here, it will be trivial to fix. 2014-06-16 Tom Tromey <tromey@redhat.com> * target.h (struct target_ops) <to_info_proc>: Make parameter const. (target_info_proc): Update. * target.c (target_info_proc): Make "args" const. * procfs.c (procfs_info_proc): Update. * linux-tdep.c (linux_info_proc): Update. (linux_core_info_proc_mappings): Make "args" const. (linux_core_info_proc): Update. * gdbarch.sh (info_proc, core_info_proc): Make "args" const. * gdbarch.c: Rebuild. * gdbarch.h: Rebuild. * corelow.c (core_info_proc): Update. |
||
Ulrich Weigand
|
2ed3c037cf |
Use address_from_register in dwarf2-frame.c:read_addr_from_reg
This patch fixes a problem that prevented use of the Dwarf unwinders on SPU, because dwarf2-frame.c common code did not support the situation where the stack and/or frame pointer is maintained in a *vector* register. This is because read_addr_from_reg is hard-coded to assume that such pointers can be read from registers via a simple get_frame_register / unpack_pointer operation. Now, there *is* a routine address_from_register that calls into the appropriate tdep routines to handle pointer values in "weird" registers like on SPU, but it turns out I cannot simply change dwarf2-frame.c to use address_from_register. This is because address_from_register uses value_from_register to create a (temporary) value, and that routine at some point calls get_frame_id in order to set up that value's VALUE_FRAME_ID entry. However, the dwarf2-frame.c read_addr_from_reg routine will be called during early unwinding (to unwind the frame's CFA), at which point the frame's ID is not actually known yet! This would cause an assert. On the other hand, we may notice that VALUE_FRAME_ID is only needed in the value returned by value_from_register if that value is later used as an lvalue. But this is obviously never done to the temporary value used in address_from_register. So, if we could change address_from_register to not call value_from_register but instead accept constructing a value that doesn't have VALUE_FRAME_ID set, things should be fine. To do that, we can change the value_from_register callback to accept a FRAME_ID instead of a FRAME; the only existing uses of the FRAME argument were either to extract its frame ID, or its gdbarch. (To keep a way of getting at the latter, we also change the callback's type from "f" to "m".) Together with the required follow-on changes in the existing value_from_register implementations (including the default one), this seems to fix the problem. As another minor interface cleanup, I've removed the explicit TYPE argument from address_from_register. This routine really always uses a default pointer type, and in the new implementation it -to some extent- relies on that fact, in that it will now no longer handle types that require gdbarch_convert_register_p handling. gdb: 2014-04-17 Ulrich Weigand <uweigand@de.ibm.com> * gdbarch.sh (value_from_register): Make class "m" instead of "f". Replace FRAME argument with FRAME_ID. * gdbarch.c, gdbarch.h: Regenerate. * findvar.c (default_value_from_register): Add GDBARCH argument; replace FRAME by FRAME_ID. No longer call get_frame_id. (value_from_register): Update call to gdbarch_value_from_register. * value.h (default_value_from_register): Update prototype. * s390-linux-tdep.c (s390_value_from_register): Update interface and call to default_value_from_register. * spu-tdep.c (spu_value_from_register): Likewise. * findvar.c (address_from_register): Remove TYPE argument. Do not call value_from_register; use gdbarch_value_from_register with null_frame_id instead. * value.h (address_from_register): Update prototype. * dwarf2-frame.c (read_addr_from_reg): Use address_from_register. * dwarf2loc.c (dwarf_expr_read_addr_from_reg): Update for address_from_register interface change. |
||
Mark Kettenis
|
27a48a9223 |
Add auxv parsing to the architecture vector.
Necessary to fix parsing auxv entries from core files on systems that use
the layout specified by ELF instead of the incompatible variant used by Linux.
gdb/Changelog:
* gdbarch.sh (auxv_parse): New.
* gdbarch.h: Regenerated.
* gdbarch.c: Regenerated.
* auxv.c (target_auxv_parse): Call gdbarch_parse_auxv if provided.
|
||
|
Yao Qi
|
e095146be2 |
Fix PR16220
This patch removes startup_gdbarch because it is not used anymore. After this patch, [PATCH] Multi-process + multi-arch: GDB https://sourceware.org/ml/gdb-patches/2012-11/msg00228.html global variable target_gdbarch is removed and gdbarch becomes per-inferior. Then, we don't have to keep global variable startup_gdbarch. Rebuild GDB with all targets. Is it OK? gdb: 2014-02-18 Yao Qi <yao@codesourcery.com> PR gdb/16220 * gdbarch.sh: Remove startup_gdbarch. * gdbarch.c: Regenerated. * gdbarch.h: Likewise. |
||
|
Yao Qi
|
c09f20e469 |
core_xfer_shared_libraries and core_xfer_shared_libraries_aix returns ULONGEST
This patch documents the return value of core_xfer_shared_libraries_aix and core_xfer_shared_libraries gdbarch methods, and changes return type to ULONGEST from LONGEST. In a following patch, core_xfer_partial. is changed to check their return values and return an appropriate target_xfer_status. gdb: 2014-02-07 Yao Qi <yao@codesourcery.com> * gdbarch.sh (core_xfer_shared_libraries): Returns ULONGEST. Add comments. (core_xfer_shared_libraries_aix): Likewise. * gdbarch.c, gdbarch.h: Regenerated. * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Return ULONGEST. Change 'len_avail' type to ULONGEST. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update declaration. (rs6000_aix_core_xfer_shared_libraries_aix): Return ULONGEST. |
||
|
Ulrich Weigand
|
591a12a1d4 |
PowerPC64 ELFv2 ABI: skip global entry point code
This patch handles another aspect of the ELFv2 ABI, which unfortunately requires common code changes. In ELFv2, functions may provide both a global and a local entry point. The global entry point (where the function symbol points to) is intended to be used for function-pointer or cross-module (PLT) calls, and requires r12 to be set up to the entry point address itself. The local entry point (which is found at a fixed offset after the global entry point, as defined by bits in the symbol table entries' st_other field), instead expects r2 to be set up to the current TOC. Now, when setting a breakpoint on a function by name, you really want that breakpoint to trigger either way, no matter whether the function is called via its local or global entry point. Since the global entry point will always fall through into the local entry point, the way to achieve that is to simply set the breakpoint at the local entry point. One way to do that would be to have prologue parsing skip the code sequence that makes up the global entry point. Unfortunately, this does not work reliably, since -for optimized code- GDB these days will not actuall invoke the prologue parsing code but instead just set the breakpoint at the symbol address and rely on DWARF being correct at any point throughout the function ... Unfortunately, I don't really see any way to express the notion of local entry points with the current set of gdbarch callbacks. Thus this patch adds a new callback, skip_entrypoint, that is somewhat analogous to skip_prologue, but is called every time GDB needs to determine a function start address, even in those cases where GDB decides to not call skip_prologue. As a side effect, the skip_entrypoint implementation on ppc64 does not need to perform any instruction parsing; it can simply rely on the local entry point flags in the symbol table entry. With this implemented, two test cases would still fail to set the breakpoint correctly, but that's because they use the construct: gdb_test "break *hello" Now, using "*hello" explicitly instructs GDB to set the breakpoint at the numerical value of "hello" treated as function pointer, so it will by definition only hit the global entry point. I think this behaviour is unavoidable, but acceptable -- most people do not use this construct, and if they do, they get what they asked for ... In one of those two test cases, use of this construct is really not appropriate. I think this was added way back when as a means to work around prologue skipping problems on some platforms. These days that shouldn't really be necessary any more ... For the other (step-bt), we really want to make sure backtracing works on the very first instruction of the routine. To enable that test also on powerpc64le-linux, we can modify the code to call the test function via function pointer (which makes it use the global entry point in the ELFv2 ABI). gdb/ChangeLog: * gdbarch.sh (skip_entrypoint): New callback. * gdbarch.c, gdbarch.h: Regenerate. * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint. * infrun.c (fill_in_stop_func): Likewise. * ppc-linux-tdep.c: Include "elf/ppc64.h". (ppc_elfv2_elf_make_msymbol_special): New function. (ppc_elfv2_skip_entrypoint): Likewise. (ppc_linux_init_abi): Install them for ELFv2. gdb/testsuite/ChangeLog: * gdb.base/sigbpt.exp: Do not use "*" when setting breakpoint on a function. * gdb.base/step-bt.c: Call hello via function pointer to make sure its first instruction is executed on powerpc64le-linux. |
||
|
Simon Marchi
|
69f9764846 |
Add comments to gdbarch_address_class_name_to_type_flags.
gdb/ChangeLog 2014-01-17 Simon Marchi <simon.marchi@ericsson.com> * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add comments. * gdbarch.h: Regenerate. |
||
Markus Metzger
|
c2170eeffa |
gdbarch: add instruction predicate methods
Add new methods to gdbarch for analyzing the instruction at a given address. Implement those methods for i386 and amd64 architectures. This is needed by "record btrace" to detect function calls in the execution trace. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call) (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New. (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump to gdbarch. * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret) (i386_insn_is_jump, i386_jmp_p): New. (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and insn_is_jump to gdbarch. * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New. * gdbarch.h: Regenerated. * gdbarch.c: Regenerated. * arch-utils.h (default_insn_is_call, default_insn_is_ret) (default_insn_is_jump): New. * arch-utils.c (default_insn_is_call, default_insn_is_ret) (default_insn_is_jump): New. |
||
|
Yao Qi
|
7ec1862d1a |
Change 'len''s type from LONGEST to ULONGEST: gdbarch methods core_xfer_shared_libraries and core_xfer_shared_libraries_aix
This patch changes the type of 'len' from LONGEST to ULONGEST. 'len' is the argument of gdbarch methods core_xfer_shared_libraries and core_xfer_shared_libraries_aix. gdb: 2014-01-14 Yao Qi <yao@codesourcery.com> * gdbarch.sh (core_xfer_shared_libraries): Change its argument 'len''s type to ULONGEST. (core_xfer_shared_libraries_aix): Likewise. * gdbarch.c, gdbarch.h: Reenerated. * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Change type of 'len' to ULONGEST. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. (rs6000_aix_core_xfer_shared_libraries_aix): Likewise. |
||
|
Tom Tromey
|
70ba0933ad |
replace XMALLOC with XNEW
This replaces XMALLOC with XNEW, and removes XMALLOC. The only non-mechanical bit here was remembering to edit gdbarch.sh. 2014-01-13 Tom Tromey <tromey@redhat.com> * defs.h (XMALLOC): Remove. * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * cli-out.c (struct ui_out *): Likewise. * cli/cli-dump.c (add_dump_command): Likewise. (add_dump_command): Likewise. * complaints.c (get_complaints): Likewise. (find_complaint): Likewise. * dwarf2-frame.c (execute_cfa_program): Likewise. * dwarf2read.c (abbrev_table_read_table): Likewise. * gdbarch.sh: Likewise. * gdbarch.c: Rebuild. * inf-ttrace.c (inf_ttrace_add_page): Likewise. * interps.c (interp_new): Likewise. * lm32-tdep.c (lm32_gdbarch_init): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * mi/mi-console.c (mi_console_file_new): Likewise. * mi/mi-interp.c (mi_interpreter_init): Likewise. * mi/mi-out.c (mi_out_new): Likewise. * mi/mi-parse.c (mi_parse): Likewise. * microblaze-tdep.c (microblaze_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * observer.c (xalloc_observer_list_node): Likewise. * regcache.c (regcache_xmalloc_1): Likewise. * reggroups.c (reggroup_new): Likewise. (_initialize_reggroup): Likewise. * registry.c (register_data_with_cleanup): Likewise. * remote.c (remote_notif_stop_alloc_reply): Likewise. * ser-base.c (serial_ttystate): Likewise. * ser-mingw.c (make_pipe_state): Likewise. * ser-pipe.c (pipe_open): Likewise. * serial.c (serial_open): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * tui/tui-data.c (tui_alloc_generic_win_info): Likewise. (tui_alloc_win_info): Likewise. (tui_add_content_elements): Likewise. * tui/tui-file.c (tui_file_new): Likewise. * tui/tui-out.c (tui_out_new): Likewise. * ui-file.c (mem_file_new): Likewise. * ui-out.c (push_level): Likewise. (make_cleanup_ui_out_end): Likewise. (append_header_to_list): Likewise. (ui_out_new): Likewise. * user-regs.c (user_reg_add_builtin): Likewise. |
||
|
Yao Qi
|
94123b4f91 |
Use enum bfd_endian in gdbarch.sh
This patch changes the return type of gdbarch_byte_order and gdbarch_byte_order_for_code, from 'int' to 'enum bfd_endian'. gdb: 2014-01-07 Yao Qi <yao@codesourcery.com> * gdbarch.sh (byte_order, byte_order_for_code): Change type to 'enum bfd_endian'. (struct gdbarch_info) <byte_order>: Change type to 'enum bfd_endian'. <byte_order_for_code>: Likewise. * gdbarch.c, gdbarch.h: Regenerated. |
||
|
Joel Brobecker
|
ecd75fc8ee | Update Copyright year range in all files maintained by GDB. | ||
|
Sergio Durigan Junior
|
05c0465e16 |
Extend SystemTap SDT probe argument parser
This patch extends the current generic parser for SystemTap SDT probe arguments. It can be almost considered a cleanup, but the main point of it is actually to allow the generic parser to accept multiple prefixes and suffixes for the its operands (i.e., integers, register names, and register indirection). I have chosen to implement this as a list of const strings, and declare this list as "static" inside each target's method used to initialize gdbarch. This patch is actually a preparation for an upcoming patch for ARM, which implements the support for multiple integer prefixes (as defined by ARM's asm spec). And AArch64 will also need this, for the same reason. This patch was regtested on all architectures that it touches (i.e., i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found. 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> * amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix, stap_integer_suffix) (stap_register_prefix, stap_register_suffix) (stap_register_indirection_prefix) (stap_register_indirection_suffix): Declare as "const char *const *" instead of "const char *". Adjust printing function. Rename all of the variables to the plural. (pstring_list): New function. * i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe argument prefixes and suffixes. Initialize gdbarch with them. * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * stap-probe.c (stap_is_generic_prefix): New function. (stap_is_register_prefix): Likewise. (stap_is_register_indirection_prefix): Likewise. (stap_is_integer_prefix): Likewise. (stap_generic_check_suffix): Likewise. (stap_check_integer_suffix): Likewise. (stap_check_register_suffix): Likewise. (stap_check_register_indirection_suffix): Likewise. (stap_parse_register_operand): Remove unecessary declarations for variables holding prefix and suffix information. Use the new functions listed above for checking for prefixes and suffixes. (stap_parse_single_operand): Likewise. |
||
|
Sergio Durigan Junior
|
e7b1239280 |
Remove gdb_string.h from gdbarch.sh
This commit removes the "#include gdb_string.h" from gdbarch.sh, fixing
a small nit caused by Tom's commit
|
||
Joel Brobecker
|
eade64714c |
Document the get_longjmp_target gdbarch method.
gdb/ChangeLog:
* gdbarch.sh (get_longjmp_target): Add method documentation.
* gdbarch.h: Regenerate.
|
||
Stan Shebs
|
0a7cfe2cf5 |
* README: Update references to writing code for GDB.
* configure.ac (build_warnings): Remove obsolete comment. * configure: Regenerate. * gdbarch.sh: Remove references to gdbint.texinfo. * gdbarch.h: Regenerate. * gdbtypes.c (objfile_type): Remove comments referencing internals manual and D10V. [gdb/doc] Remove the internals manual gdbint.texinfo. * Makefile.in (INFO_DEPS): Remove gdbint.info. (PDFFILES): Remove gdbint.pdf. (HTMLFILES): Remove gdbint/index.html. (HTMLFILES_INSTALL): Remove gdbint. (GDBINT_DOC_FILES): Remove. (dvi): Remove gdbint.dvi. (ps): Remove gdbint.ps. * gdbint.texinfo: Remove file. * gdb.texinfo (Maintenance Commands): Remove reference to gdbint. |
||
|
Sergio Durigan Junior
|
eb14d40688 |
This patch implements the new gdbarch method gdbarch_gdb_signal_to_target.
It will be used when one wants to convert between the internal GDB signal representation (enum gdb_signal) and the target's representation. The idea of this patch came from a chat between Pedro and I on IRC, plus the discussion of my patches to add the new $_exitsignal convenience variable: <http://sourceware.org/ml/gdb-patches/2013-06/msg00452.html> <http://sourceware.org/ml/gdb-patches/2013-06/msg00352.html> What I did was to investigate, on the Linux kernel, which targets shared the signal numbers definition with the generic definition, present at <include/uapi/asm-generic/signal.h>. For the record, I used linux-3.10-rc7 as the main source of information, always looking at <arch/<ARCH_NAME>/include/uapi/asm/signal.h>. For SIGRTMAX (which defaults to _NSIG in most cases), I had to look at different signal-related files, but most of them (except MIPS) were defined to 64 anyway. Then, with all the differences in hand, I implemented the bits on each target. 2013-08-09 Sergio Durigan Junior <sergiodj@redhat.com> * linux-tdep.c: Define enum with generic signal numbers. (linux_gdb_signal_from_target): New function. (linux_gdb_signal_to_target): Likewise. (linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target methods to the functions above. * linux-tdep.h (linux_gdb_signal_from_target): New prototype. (linux_gdb_signal_to_target): Likewise. * alpha-linux-tdep.c: Define new enum with signals different from generic Linux kernel. (alpha_linux_gdb_signal_from_target): New function. (alpha_linux_gdb_signal_to_target): Likewise. (alpha_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target with the functions mentioned above. * avr-tdep.c: Define enum with differences between Linux kernel and AVR signals. (avr_linux_gdb_signal_from_target): New function. (avr_linux_gdb_signal_to_target): Likewise. (avr_gdbarch_init): Set gdbarch_gdb_signal_{to,from}_target to the functions mentioned above. * sparc-linux-tdep.c: Define enum with differences between SPARC and generic Linux kernel signal numbers. (sparc32_linux_gdb_signal_from_target): New function. (sparc32_linux_gdb_signal_to_target): Likewise. (sparc32_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target to the functions defined above. * xtensa-linux-tdep.c: Define enum with differences between Xtensa and Linux kernel generic signals. (xtensa_linux_gdb_signal_from_target): New function. (xtensa_linux_gdb_signal_to_target): Likewise. (xtensa_linux_init_abi): Set gdbarch_gdb_signal_to_target to the functions defined above. * mips-linux-tdep.c: Define enum with differences between signals in MIPS and Linux kernel generic ones. (mips_gdb_signal_to_target): New function. (mips_gdb_signal_from_target): Redefine to use new enum, handle only different signals from the Linux kernel generic. (mips_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target the functions defined above. * mips-linux-tdep.h (enum mips_signals): Remove. |
||
|
Joel Brobecker
|
356a523362 |
ppc-aix core file relocation.
The current code attempts to provide relocation support when debugging core files via the rs6000_xfer_partial method of the rs6000-nat target_ops vector. However, this target_ops vector does not get pushed on the target stack at all when debugging core files, thus bypassing completely that part of the code. This patch fixes the problem by extending corelow's core_xfer_partial into handling the TARGET_OBJECT_LIBRARIES_AIX object. gdb/ChangeLog: * gdbarch.sh (core_xfer_shared_libraries_aix): New method. * gdbarch.h, gdbarch.c: Regenerate. * corelow.c (core_xfer_partial): Add TARGET_OBJECT_LIBRARIES_AIX handling. * rs6000-aix-tdep.h: New file. * Makefile.in (HFILES_NO_SRCDIR): Add rs6000-aix-tdep.h. * rs6000-aix-tdep.c: Include "rs6000-aix-tdep.h" and "xml-utils.h". (struct field_info, struct ld_info_desc): New types. (ld_info32_desc, ld_info64_desc): New static constants. (struct ld_info): New type. (rs6000_aix_extract_ld_info): New function. (rs6000_aix_shared_library_to_xml): Likewise. (rs6000_aix_ld_info_to_xml): Likewise. (rs6000_aix_core_xfer_shared_libraries_aix): Likewise. (rs6000_aix_init_osabi): Add call to set_gdbarch_core_xfer_shared_libraries_aix. * rs6000-nat.c: Add "rs6000-aix-tdep.h" include. Remove "xml-utils.h" include. (LdInfo): Delete typedef. (ARCH64_DECL, LDI_FIELD, LDI_NEXT, LDI_FD, LDI_FILENAME): Delete macros. (rs6000_ptrace_ldinfo): Change return type to gdb_byte *. Adjust code accordingly. (rs6000_core_ldinfo): Delete, folded into rs6000_aix_core_xfer_shared_libraries_aix. (rs6000_xfer_shared_library): Delete. (rs6000_xfer_shared_libraries): Reimplement. |
||
|
Sergio Durigan Junior
|
b3ac9c7756 |
2013-02-04 Sergio Durigan Junior <sergiodj@redhat.com>
Denys Vlasenko <dvlasenk@redhat.com> Pedro Alves <palves@redhat.com> * gdbarch.sh (elfcore_write_linux_prpsinfo): New F hook. (struct elf_internal_linux_prpsinfo): Forward declare. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include `cli/cli-utils.h'. (linux_fill_prpsinfo): New function. (linux_make_corefile_notes): Use linux_fill_prpsinfo. If there's an elfcore_write_linux_prpsinfo hook, use it, otherwise, use elfcore_write_linux_prpsinfo32 or elfcore_write_linux_prpsinfo64 depending on gdbarch pointer bitness. * ppc-linux-tdep.c: Include elf-bfd.h. (ppc_linux_init_abi): Hook in elfcore_write_ppc_linux_prpsinfo32 on 32-bit. |
||
|
Joel Brobecker
|
28e7fd6234 |
Update years in copyright notice for the GDB files.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
||
|
Joel Brobecker
|
bf6be9db91 |
Fix copyright years in gdbarch.h and gdbarch.c.
copyright.py was updating gdbarch.sh' copyright years, but not
the function that genarates the copyright headers for gdbarch.[hc].
This patch makes the following changes:
- fixes gdbarch.sh and regenerates gdbarch.[hc]
- Modify copyright.py to remind the user to update gdbarch.sh
by hand. This should also remind the user to rerun the script
and update gdbarch.[hc] - see next point;
- Allow copyright.py to update gdbarch.[hc]'c copyright years,
even though these are generated files; This should free
the user from having to update gdbarch.[hc] himself;
gdb/ChangeLog:
* gdbarch.sh (copyright): Update copyright years.
* gdbarch.h, gdbarch.c: Regenerate.
* copyright.py (EXCLUDE_LIST): Remove gdbarch.h and gdbarch.c.
(MULTIPLE_COPYRIGHT_HEADERS): Add 'gdb/gdbarch.sh'.
|
||
|
Joel Brobecker
|
7e35103a30 |
gdbarch-ification of ravenscar-thread support.
gdb/ChangeLog:
* gdbarch.sh: Add "struct ravenscar_arch_ops" advance
declaration.
(ravenscar_ops): New gdbarch variable.
* gdbarch.h, gdbarch.c: Regenerate.
* ravenscar-thread.h (ravenscar_register_arch_ops): Delete.
* ravenscar-thread.c (current_arch_ops): Delete.
(ravenscar_fetch_registers): Get the ravenscar_arch_ops
from the gdbarch.
(ravenscar_store_registers, ravenscar_prepare_to_store): Likewise.
(ravenscar_inferior_created): Add gdbarch_ravenscar_ops check.
(ravenscar_register_arch_ops): Delete.
* ravenscar-sparc-thread.h: New file.
* ravenscar-sparc-thread.c: #include "ravenscar-sparc-thread.h".
(ravenscar_sparc_ops): Define value statically.
(_initialize_ravenscar_sparc): Delete.
(register_sparc_ravenscar_ops): New function.
* sparc-tdep.c: #include "ravenscar-sparc-thread.h".
(sparc32_gdbarch_init): Add call to register_sparc_ravenscar_ops.
* Makefile.in (ALL_TARGET_OBS): Add ravenscar-thread.o and
ravenscar-sparc-thread.o.
(SFILES): Add ravenscar-thread.c.
(HFILES_NO_SRCDIR): Add ravenscar-sparc-thread.h.
(ALLDEPFILES): ravenscar-sparc-thread.c.
* configure.tgt: Add ravenscar-thread.o and ravenscar-sparc-thread.o
to gdb_target_obs
for all the targets that use sparc-tdep.o.
|
||
|
Tom Tromey
|
451b7c33cb |
gdb
* NEWS: Mention "info proc" and core files.
* corelow.c (core_info_proc): New function.
(init_core_ops): Set to_info_proc.
* gdbarch.c, gdbarch.h: Rebuild.
* gdbarch.sh (core_info_proc): New method.
* infcmd.c (info_proc_cmd_1): Invoke target_info_proc first.
* linux-tdep.c (linux_core_info_proc_mappings)
(linux_core_info_proc): New functions.
(linux_find_memory_region_ftype): New typedef.
(linux_find_memory_regions_full): New function, from
linux_find_memory_regions.
(struct linux_find_memory_regions_data): New.
(linux_find_memory_regions_thunk): New function.
(linux_find_memory_regions): Rewrite.
(struct linux_make_mappings_data): New.
(linux_make_mappings_callback)
(linux_make_mappings_corefile_notes): New functions.
(linux_make_corefile_notes): Call linux_make_mappings_corefile_notes.
(linux_init_abi): Call set_gdbarch_core_info_proc.
* target.c (target_info_proc): Return 'int'.
* target.h (target_info_proc): Update.
gdb/doc
* gdb.texinfo (SVR4 Process Information): Mention core files.
gdb/testsuite
* gdb.base/info-proc.exp: Add core file tests.
bfd
* elf.c (elfcore_grok_note) <NT_FILE>: New case.
|
||
|
Pedro Alves
|
c9023fb3ce |
2012-12-13 Pedro Alves <palves@redhat.com>
* gdbarch.sh (do_read): Set IFS to blank. |
||
|
Joel Brobecker
|
6f112b1867 |
Remove trailing space in gdbarch.sh.
gdb/ChangeLog:
* gdbarch.sh (software_single_step): Remove trailing space in
comment (gdbarch.h is already correct).
|
||
|
Yao Qi
|
85ddcc7021 |
gdb/
2012-11-21 Yao Qi <yao@codesourcery.com> PR tdep/7438 * gdbarch.sh (smash_text_address): Remove. * gdbarch.c, gdbarch.h: Regenerate. * arm-tdep.c (arm_smash_text_address): Remove. (arm_gdbarch_init): Don't call set_gdbarch_smash_text_address. * hppa-tdep.c (hppa_smash_text_address): Remove. (hppa_addr_bits_remove): Rename from hppa_smash_text_address. (hppa_gdbarch_init): Don't call set_gdbarch_smash_text_address. Caller update. * coffread.c (coff_symtab_read): Caller update. * dbxread.c (process_one_symbol): Likewise. * elfread.c (record_minimal_symbol): Likewise. * somread.c (som_symtab_read): Likewise. |
||
|
Tom Tromey
|
aff68abbd7 |
* gdbarch.h, gdbarch.c: Rebuild.
* gdbarch.sh (set_target_gdbarch): Rename from deprecated_target_gdbarch_select_hack. * arch-utils.c (gdbarch_update_p): Update. (set_gdbarch_from_file): Update. |
||
|
Tom Tromey
|
f5656eadf4 |
* gdbarch.sh (target_gdbarch): Remove macro.
(get_target_gdbarch): Rename to target_gdbarch. * gdbarch.c, gdbarch.h: Rebuild. * ada-tasks.c, aix-thread.c, amd64-linux-nat.c, arch-utils.c, arm-tdep.c, auxv.c, breakpoint.c, bsd-uthread.c, corefile.c, darwin-nat-info.c, dcache.c, dsrec.c, exec.c, fbsd-nat.c, filesystem.c, gcore.c, gnu-nat.c, i386-darwin-nat.c, i386-nat.c, ia64-vms-tdep.c, inf-ptrace.c, infcmd.c, jit.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, m32r-rom.c, memattr.c, mep-tdep.c, microblaze-tdep.c, mips-linux-nat.c, mips-linux-tdep.c, mips-tdep.c, monitor.c, moxie-tdep.c, nto-procfs.c, nto-tdep.c, ppc-linux-nat.c, proc-service.c, procfs.c, progspace.c, ravenscar-thread.c, record.c, remote-m32r-sdi.c, remote-mips.c, remote-sim.c, remote.c, rl78-tdep.c, rs6000-nat.c, rx-tdep.c, s390-nat.c, sol-thread.c, solib-darwin.c, solib-dsbt.c, solib-frv.c, solib-ia64-hpux.c, solib-irix.c, solib-pa64.c, solib-som.c, solib-spu.c, solib-sunos.c, solib-svr4.c, solib.c, spu-linux-nat.c, spu-multiarch.c, spu-tdep.c, symfile-mem.c, symfile.c, symtab.c, target-descriptions.c, target.c, target.h, tracepoint.c, windows-nat.c, windows-tdep.c, xcoffsolib.c, cli/cli-dump.c, common/agent.c, mi/mi-interp.c, python/py-finishbreakpoint.c, python/py-inferior.c, python/python.c: Update. |